VIPERFLEX ELECTRIC CABLE

Transcription

1 VIPERFLEX Flexible Low Voltage Electric Cable - 0.6/1kV (Rubber insulated) H07 RN-F & H07 BN-F Single Core 2-Core 2-Core and Earth 3-Core and Earth 4-Core and Earth Multi-Core and Earth H07 RCN-F & H07 BCN-F Single Core, CWS 2-Core and earth, CWS 3-Core and Earth, CWS 4-Core and Earth, CWS 27

2 Application WW H07 heavy duty rubber-sheathed flexible cables are mostly used as power electric cable for equipment in industry work such as boilers, heating plates, hand lamps, transportable motor etc. They can be installed at medium mechanical stress in dry, damp and wet areas as well as in open air and in agriculture plants. These cables are also suitable for fixed installation on plaster, in temporary buildings and residential barracks. They are suitable for direct laying on components and mechanical parts of machines i.e. lifts and cranes. The cables are able to be used in case of protected and fixed installation in tubes or in equipment as well as rotor connecting cable of motors with a working voltage up to and including 1000V ac or 750V dc against ground. The cables are resistant to Ozone, Weather. VDE0282 Standard references VDE 0295 VDE0293 IEC IEC60228 AS/NZS 1125 AS/NZS 3808 AS/NZS Configurations Conductor: Insulation: Laying-up : Type H07 RN-F Type H07 BN-F Type H07 RCN-F Type H07 BCN-F plain or tinned annealed copper, class 5 fine wires stranded rubber based compound to VDE 0207 part 20 plain or tinned annealed copper, class 5 fine wires stranded ethylene propylene rubber (EPR) compound Bedding n/a n/a Copper wires screen Sheath: Conductor Operating temperature range: - Rubber cables and flexible cords for power installation, heat-resistant silicone rubber insulated cable, halogen-free insulated cables arc welding cable, rubber lift cable, rubber sheathed flexible cable. - Conductors of cables, wires and flexible cords for power installation - Core identification for cables and flexible cords used in power installation - Rubber insulated cables - Rated voltages up to and including 450/750 V-Part4: Cordsandflexible cables - Conductors of insulated cables - Conductors in insulated electric cables and flexible cords - Insulating and sheathing materials for electric cables - Electric cables - polymeric insulated part 1: For working voltages up to and including 0.6/1 (1.2) kv n/a -60ºC ~ 70ºC (120ºC n/a -40ºC ~ 90ºC (250ºC plain or tinned annealed copper, class 5 fine wires stranded rubber based compound to VDE 0207 part 20 plain or tinned annealed copper wires braiding with 82% coverage -60ºC ~ 70ºC (120ºC plain or tinned annealed copper, class 5 fine wires stranded ethylene propylene rubber (EPR) compound Plain or tinned annealed copper wires braiding with 82% coverage -40ºC ~ 90ºC (250ºC --The maximum conductor temperature specified is based on the properties of the insulation material but in practice may need to be derated to take account of joints and terminations and environmental conditions. Insulation and sheath material characteristic Insulation: Type H07 RN-F: Type H07 BN-F: Sheath: Environment Chemical Submersible Flammable, Oxygen index LOI O2 22% Shore hardness 60~70 A Shore hardness 65~85 A - excellent resistance to Ozone, Weather, Flame, Oxidation, Radiation, Sunlight, Water. Physical & Mechanical - Flexible, excellent resistance to Abrasion, Compression Set, - excellent resistance to Acids, Alcohol's, Oils - 100mtre (200mtr is available on request, subject to minimum quantities) Core identification to VDE cores: Brown, Blue 2 cores + earth (3G): Brown, Blue + Green/Yellow 3 cores + earth (4G): Brown, Black, Grey + Green/Yellow 4 cores + earth (5G): Brown, Blue, Black, Grey + Green/Yellow 6 core and more + earth: Black core, white numbering + Green/Yellow Sheath colour: Black - Submersible depth to 100metre 28

3 Mechanical characteristic Minimum Bending Radius: Pulling Tension: 4.0xCable Diameter for fixed installation 7.5xCable Diameter for guiding over roller 5.0 ~ 7.0xCable Diameter for during winding on drum The safety pulling tension should be limited to 15N/mm 2 of the total cross-sectional area of conductor Physical & electrical characteristics: Rated Voltage: Maximum permissible operating voltage in three phase and single phase a.c system (VDE Standard): 495/825V Maximum permissible operating voltage in three phase and single phase a.c system (AS/NZS Standard): 660/1100kV Maximum permissible operating voltage in direct-current (d.c) system (VDE Standard): 743/1238V Maximum permissible operating voltage in direct-current (d.c) system (AS/NZS Standard): 900/1650 Cable voltage test criteria (the following test will be conducted at manufacturer's work) a. Insulation spark test at 6kV b. Cable a.c. withstand voltage test at 3.5kV / 5 min. 450/750V in accordance with VDE and IEC standard 600/1000V in accordance with AS/NZS standard Nominal Conductor Avg. insulation Approx. Core Max. D.C 20ºC CSA Strands Thickness Diameter Plain Cu Tinned Cu mm² no/mm mm mm /km /km 1 32/ / / / / / / / / / / / / / / / /

4 Cable a.c. characteristic Nominal Current Rating for H07 RN-F at 70ºC 3-phase Fault current CSA 2C (2 loaded) 3G (2 loaded) 4G (3 loaded) 5G (3 loaded) Voltage Drop rating mm² A A A A mv/am (Max.) ka Nominal Current Rating for H07 BN-F at 90ºC 3-phase Fault current CSA 2C (2 loaded) 3G (2 loaded) 4G (3 loaded) 5G (3 loaded) Voltage Drop rating mm² A A A A mv/am (Max.) ka Current rating is calculated based on ambient air temperature at 40 o C. 30

5 1C, Single Core Nominal Core Cable Overall Type H07 BN-F CSA Diameter Diameter Product Approx. Weight mm² mm mm Code kg/km ER ER ER ER ER ER ER ER ER ER ER C, 2 core without earth ER ER ER ER ER ER ER ER ER ER G, 2 core + earth ER ER ER ER ER ER ER ER ER ER ER ER ER ER ER ER ER

6 4G, 3 core + earth ER ER ER ER ER ER ER ER ER ER ER ER ER ER ER ER ER G, 3 core + neutral + earth ER ER ER ER ER ER ER ER ER ER ER ER ER ER ER ER ER Multi core, >5 core with earth Nominal No Core Core Cable Overall Type H07 RN-F Type H07 BN-F CSA Of Diameter Laid-up Diameter Product Approx. Weight Product Approx. Weight mm² Core mm Configuration mm Code kg/km Code kg/km 1.5 7G ER G ER G ER G ER G ER G ER G ER G ER

7 EMC (copper braid screened) Type H07RCN-F, H07 BCN-F No. Conductor Core Over Bedding Cable H07 RCN-F H07 BCN-F of Area Dia. Dia. Dia. Product Approx.Weight Product Approx.Weight Core (mm²) (mm) (mm) (mm) Code (kg/km) Code (kg/km) 1C S ERS C S ERS C S ERS C S ERS C S ERS C+E S ERS C+E S ERS C+E S ERS C+E S ERS C+E S ERS C+E S ERS C+E S ERS C+E S ERS C+E S ERS C+E S ERS C+E S ERS C+E S ERS C+E S ERS C+E S ERS C+E S ERS C+E S ERS C+E S ERS C+E S ERS C+E S ERS C+E S ERS C+E S ERS C+E S ERS C+E S ERS C+E S ERS C+E S ERS C+E S ERS C+E S ERS C+E S ERS C+E S ERS