FOREWORD ONE OF THE WORLD S BIGGEST COMPANIES IN THE SECTOR.

Transcription

1 OFFSHORE CABLES

2

3 FOREWORD ONE OF THE WORLD S BIGGEST COMPANIES IN THE SECTOR. General Cable Corporation is one of the world s leading cable manufacturing companies. In its work it has contributed decisively to progress and improvements in people s quality of life. Through innovation and technology General Cable is present in the development and evolution of society. With more than 13,000 associates operating in 26 countries and 57 manufacturing facilities, General Cable is a global leader in the supply of products and services to the global oil, gas and petrochemical industry. The company has a hundred-year tradition and its own values based on customer satisfaction, integrity in all it does, teamwork, delivery speed, creativity and innovation, and ongoing improvement, in which people are its main source of value. This is General Cable, a company with a commitment to the future, to innovation, and to sustainability. It is a company prepared to meet its commitment to society and the environment.

4

5 INDEX Symbols Introduction OFFSHORE CABLES Technical information Selection guide Cables for offshore installations Installation guide General Cable reserves the right to alter or modify specifications and materials in the light of later technical development.

6 SYMBOLS FLAME RETARDANT SINGLE WIRE - IEC FLAME RETARDANT BUNCHED WIRES - IEC , cat. A FIRE RESISTANT - IEC LOW SMOKE EMISSION - IEC HALOGEN FREE - IEC LOW ACIDITY AND CORROSIVITY OF EVOLVED GASES - IEC INCREASED FLEXIBILITY MECHANICAL RESISTANCE 6 HEAVY DUTY

7 WEATHERING TEST RESISTANT MINERAL OIL RESISTANCE HYDROCARBON RESISTANCE REDUCED BENDING RADIUS ELECTRO-MAGNETIC INTERFERENCE PROTECTION WATERTIGHT MUD OIL RESISTANCE WORK AT VERY LOW TEMPERATURE -40 ºC 7

8 INTRODUCTION OFFSHORE CABLES In this catalogue General Cable presents its series of shipboard energy, control and instrumentation cables for fixed installations on vessels and oil rigs. The safety of people and equipment is a priority consideration in the design and construction of Exzhellent-606 and Genfire-606 cables. They are made from zero-halogen compounds with a low-acidity and -corrosivity of gases evolved and a low opacity of fumes evolved during combustion, in accordance with the corresponding IEC standards. They therefore allow for quick, safe evacuation in the event of fire. The cables are designed to comply with the strictest non-fire propagation standards and prevent the generation of secondary seats of fire even in circumstances of high cable concentration in unfavourable conditions. There are also fire-resistant designs that feature not only the above properties, but are also able to continue providing service even when directly affected by fire. Their use in safety services enables the services to continue working even in situations of fire. Reinforced cables feature standard tinned copper braiding that provides good mechanical protection and may also be used in specific applications such as shielding. Exzhellent-606 and Genfire-606 cables may be used in extreme climates, principally because of their resistance to very low temperatures. This catalogue also includes specific designs for energy cables used in circuits with variable frequency drives (VFD). The cables described in this catalogue have been designed in accordance with the following standards and specifications. TECHNICAL SPECIFITATION NEK TS 606 Cables for off-shore installation - Halogen-free and/or mud resistant - Technical specification. IEC Electrical installations in ships. IEC Choice and installation of electrical cables. 8

9 IEC Single and multicore non-radial field power cables with extruded solid insulation for rated voltages 1 kv and 3 kv. IEC Single and three-core power cables with extruded solid insulation for rated voltafes 6 kv up to 30 kv. IEC Cables for control and instrumentation circuits 150/250 V. IEC Insulation materials for shipboard and offshore units, power, control, instrumantarion, telecommunication and data cables. IEC Sheathing materials for shipboard power and telecommunication cables. IEC Conductors of insulated cables. IEC cat. A Tests on bunched electric cables under fire conditions, fire retardant. IEC Circuit integrity - Procedures and requirements for cables up to and including 0,6/1 kv. IEC Circuit integrity - Test method for a temperature of at least 830 ºC for cables rated up to 0,6/1 kv and with an overall diameter exceeding 20 mm. IEC Circuit integrity - Test method for a temperature of at least 830 ºC for cables rated up to 0,6/1 kv and with an overall diameter not exceeding 20 mm. IEC Determination of the amount of halogen acid gas. 9

10 IEC Determination of degree of acidity of gases. IEC Measurement of smoke density. Cables shown in this cataloge are covered with Type Approvals from main classification societies: ABS BUREAU VERITAS GERMANISCHER LLOYD LLOYD S REGISTER DET NORSKE VERITAS 10

11 APLICATIONS Depending on their use, the cables are distributed into the following groups: LOW VOLTAGE POWER CABLES (NEK TS 606) Power cables suitable for operation at up to and including 0.6/1 kv. Constructions up to and including 4 core. Coloured core identification. Non armoured and armoured with tinned copper wire braid. Available designs with mud resistance and/or fire resistance (circuit integrity). Available designs for variable frequency drives (VFD). MEDIUM VOLTAGE CABLES (NEK TS 606) Cables for distribution of energy in voltages of 3,6/6 to 12/20 kv. Armoured with tinned copper wire braid. Available designs with mud resistance. CONTROL CABLES (NEK TS 606) Available from 2 to 37 cores. Identification by numbering. Armoured with tinned copper wire braid. Available designs with mud resistance and/or fire resistance (circuit integrity). INTRUMENTATION CABLES (NEK TS 606) Multiunit (pairs or triple core). Cores identified by colours and numbered tape in each unit. Two pair cable without individual screen has a star/quad composition. Individual and/or collective screening of units using Cu / Poliester tape and drain wire. Cable screening using tinned copper wire braid. CONSTRUCTION On the basis of the above-mentioned IEC standards, and reviewing the formation of the cables, we have: Conductor Tinned annealed copper in accordance with IEC : Class 2: Rigid conductors with 7 wire formation (in small sections) or concentric layers in big cross sections. Class 5: Flexible conductors bunched or multibunched configurations. In general those class 2 are used, but the use of class 5 is growing, due to their handeability and therefore their greater ease of installation. 11

12 Tin plated conductor is used to offer greater protection of conections against oxidation in heavy marine environments. See the following tables for standarized sections and compositions to be used: CROSS SECTIONAL AREA Cable type Voltage (kv) Area of conductor (mm 2 ) IEC Standard Power Low Voltage 1 kv 3 kv 1,5 : 300 mm 2 10 : 300 mm Instrumentation 250 V 0,50 : 2, Power Medium Voltage 6 kv 10 kv 15 kv 20 kv 10 : 630 mm 2 16 : 630 mm 2 25 : 630 mm 2 35 : 630 mm COMPOSITION NUMBER OF CORES Cable type Number of cores IEC Standard Power L.V. N (Not specified) Control cables 2,4,7,12,19,27,37 cores Instrumentation 1,2*4,7,10,14,19, 24,30,37 pairs Power M.V. 1 or 3 cores (*) Two pair cable is a star-quad composition, cores diametrally oposed are used to conform the pairs. 12

13 Insulation materials NEK TS 606 specifies insulation materials making reference to standard IEC The ones used in the current catalog are: EPR (Ethylene propylene). A thermosetting elastomer, it has an almost nil distortion due to the action of heat. It gives the cable greater flexibility. Especially suitable if the sheath has to be a crosslinked compound. HEPR (Hard grade etylene propylene). Improved EPR compound bringing beter performance both in mechanical o electrical properties. This brings to a thickness insulations similars to the XLPE ones. INSULATION MATERIALS Maximum rated conductor Temperature ºC T ype of insulating compound Abbreviated designation Normal Operation Short-circuit Elastomeric or thermoset Ethylene-propylene rubber or similar (EPM o EPDM) Halogen free EPR High modulus of hard grade halogen free ethylene propylene rubber HEPR Sheating materials The sheath of the cables protects the set of cores from the mechanical or environmental aggressions they can suffer. Mechanical aggressions are mainly abrasions from the dragging of the cables and tears at angles of the tubes and occur during the installation, while the environment aggressions (heat, presence of oils or aggressive agents) will affect the cable throughout its working life. Halogen free termosetting compound SHF 2. It has the advantages of being a heat-stable compound which does not release toxic gases or opaques smoke in case of fire (see annex 2), and it has good resistance to oils, fuel and solvents. Good resistance to mechanical demands. 13

14 Halogen-free mud-resistant crosslinked compound SHF Mud. The same characteristics as per material type SHF 2 adding mud resistance according to NEK TS 606. Type of sheathing compound Abbreviated designation Elastomeric or thermoset Ethylene-propylene rubber or similar (EPM o EPDM) Halogen free SHF 2 High modulus of hard grade halogen free ethylene propylene rubber SHF Mud Armouring The armour gives the cable mechanical protection. The copper in tinplated version being used in this case. The use of tinned copper in the armour performs a dual function as it behaves as armour but also as a screen. Type Materials BRAID Tinned annealed copper Screening In low tensión cables, the screens are the elements which provide the cable protection against electromagnetic fields. This is an element especially suitable for cables for instrumentation, control and transmission of signals thanks to its sensitivity to radiation which can distort the signal transmitted by the cable. To protect the cable from radiation it is necessary to screen the group of conductors (protection from external disturbance) or each one of the pairs or triples (electromagnetic fields from other elements of the same cable). According to the standard, screens can be either braid or laminated polyester tape. In all designs of 2, 3 and 4 cores, the screen cross-section has been defined according to the criteria set in standard IEC Table 2, so it can be used as an earthing conductor. In armoured type cables, the use of tinned copper wire braid armour, when properly earthed, allows to use it as a collective screen. Type Materials BRAID TAPE Tinned annealed copper Cu / Polyester 14

15 Electromagnetic compatibility (EMC) When General Cable products are installed in accordance with IEC 60533, they fulfil the requirements for Electro-Magnetic Compatibility. FIRE PERFORMANCE OF CABLES To establish how cables perform in the event of fire, a series of standards have been developed to define fire conditions and measure the cable s performance in a similar situation to that of the installation. It should nonetheless be remembered that these tests establish fixed, reproducible conditions used to appraise the performance of the cables in this situation. Current IEC standards envisage the following events: Flame retardant (IEC ) A 1 kw flame in contact with the cable sheath for a time established in the standard should not spread. The cable will not therefore prompt a fire caused by a minor incident or by an external heat source with which it comes into accidental contact. Flame retardant (IEC ) A fire unconnected with the cable may affect a wiring system and become more serious if the system is oriented vertically, thus allowing the circulation of air and the creation of a chimney effect. If the decomposition temperature of the organic materials is reached, exothermic combustion of the cables occurs and the fire spreads. The insulation compounds used in Exzhellent-606 y Genfire-606 cable sheaths are designed to hinder exothermic reaction. To simulate this situation, the test involves the application of powered air and a 20-kW gas burner to a bundle of cables arranged to simulate a vertical wiring system. In these conditions, a fire in the cables prolonged for 40 must go out in the time established in the standard and must not exceed a length of 2.5 metres. The prescribed standard applicable in the ship industry is IEC 60332, part. 3-22, cat A. Category A prescribes the maximum volume of inflammable material (seven litres per metre). Fire resistance (IEC 60331) IEC defines the test conditions applied to a cable that must remain in service in safety circuits even when directly affected by a fire and when its organic parts are decomposing. IEC

16 In the test, the cable is subject to the action of a burner at a minimum flame temperature of 750 ºC (standard IEC ) or of 830 ºC (for cables with an overall diameter of over 20 mm in IEC and for cables with an overall diameter not exceeding 20 mm in IEC ) for a period of 90 minutes, during and at the end of which the cable must remain in service. Halogen-free and low smoke emission cables Cables subject to fire, depending on the materials of which they are made, may give off gases that are toxic for people s health or corrosive and therefore hinder the proper operation and preservation of the electronic and IT components in the vicinity. Opaque smoke that prevents a view of the escape routes from the affected sites may also be given off. To minimise these effects, General Cable has developed the Exzhellent series cables that eliminate harmful emissions of halogenated and toxic gases (IEC and ), substantially reduce opaque smokes and thus facilitate the evacuation of people (IEC ). IEC Cat. A IEC IEC

17 IEC IEC SHEATHING MATERIALS ANNEX 1 Halogen Free Halogen Free Halogen Free Mud Resistant Sheathing material Standards Units Thermoplastic Thermosetting Crosslinked Index oxigen limit ASTM-D-2863 % Temperature index ASTM-D-2863 ºC Halogen content IEC % <0,5 <0,5 <0,5 Corrosivity index IEC ph >4,3 >4,3 >4,3 Smoke density (Dm) IEC % 180 >

18 MATERIAL MECHANICAL CHARACTERISTICS Unaged Tensile Strenght IEC N/mm 2 9,0 9,0 9,0 Unaged Elongation at Break % Ageing in air over IEC C C C Oil Resistance / MUD IEC NEK TS 606 n.a. IRM ºC IRM ºC IRM ºC Calcium Bromide Brine 56 70ºC Carbo Sea 56 70ºC Minimum Low Temp. Operation IEC ºC -40ºC -40ºC SMOKE EMISSION CHARACTERISTICS ANNEX % Transmitancia / % transmittance % Transmitancia / % transmittance Tiempo (minutos) / Time (minutes) SHF 2 SHF 1 SE1 (CP) ST2 (PVC) SHF 2 SHF 1 SE1 (CP) ST2 (PVC) Tiempo (minutos) / Time (minutes)

19 TECHNICAL INFORMATION CABLE DESIGNATION Cable designation is based in the letter code described in the tables below: Halogen free design Materials Insulation Inner covering / Inner Sheath Armour / Shield Outer Sheath Additional characteristics Fire resistant tape + insulation B Ethylene Propylene Rubber (EPR) R Inner covering F No armour X Tinned Copper wire braid O Thermoset compound SHF 2 or SHF Mud U Unit screening (i) Individual (c) Collective Variable frequency drives VFD The cable designation also includes the number and size of cores (NxS), substituing the symbol x by the symbol G when an earth core is required. In two, three or four core cables armoured power, the NxS/E terminology is used to illustrate the cables in wich the copper wire braid armour can be employed as the earth conductor. In this case, the cross sectional area of the braid (E) is equal or greater than 50% of the phase conductors. CURRENT CARRYING CAPACITIES General Cable recommends the utilisation of current ratings according to standard IEC based on conductor temperature of 90 ºC and ambient temperature of 45 ºC. As an alternative, it is possible to use the current ratings included in the regulations of third-party bodies. De-rating factors for differing methods of installation, and ambient temperatures are specified in IEC

20 CABLE OVERALL DIAMETER TOLERANCE Nominal overall diameter (mm) Low voltage power & control Tolerance (mm) High voltage power < , , , , , ,9 > 79,9-0,5 +1,0-1,0 +2,0-0,5-0,75-0,75-0,75-1,0-1,0-1,0 +2,0 +2,5 +3,0 +3,5 +4,0 +5,0 +5,5-1,0-1,5-1,5-1,5-1,5-1,5-1,5 +2,5 +3,0 +4,0 +4,5 +5,0 +6,0 +6,5 Tolerance (mm) Number of pairs or triples Instrumentation Pares Pairs Tríos Triples 5-1,5 +1, > > 8-2,0-2,5-1,5-1,5-2,5 +1,5 +2,5 +1,5 +2,0 +2,5 MINIMUM BENDING RADIUS (IEC ) R: minimum bending radius; a lower radius does not guarantee cable integrity as it may have suffered potential damage that shortens its useful life. R Cable 20

21 MINIMUM BENDING RADIUS (IEC ) Up to and including 1,8/3 kv Nominal overall diameter Insulation Covering (D) Minimum internal radius of bend Thermoplastic or thermosetting Circular copper conductors a) 6D for circuit integrity Unarmoured or unbraided Metal braid screened or armoured Composite polyester/metal tape screened units or collective tape screening < 25 mm 4 D a > 25 mm 6 D Any 6 D Any 8 D Higher than 1,8/3 kv Single core Any Any 12 D 3 core cable Any Any 9 D CORE IDENTIFICATION Power cables up to 1,8/3 kv Number of cores Phase Neutral Earth 2 2+E 3 3+E 4 4+E 21

22 Power cables of 3,6/6 kv and above Number of cores 3 Multi-conductor control cables of 250 V or 0,6/1 kv n n n equals the correlative conductor number Instrumentation cables of 150/250 V Pair n n Triple n n n Two pairs collective screen n equals number of each pair or triple Grey sheath Intrinsically safe circuits: Blue sheath Two pair cables collectively screened are laid up with diametrically opposite cores. 22

23 2 TECHNICAL DATA FOR OFFSHORE INSTRUMENTATION CABLES Conductor cross sectional area (mm 2 ) Standard Fire resistant 1000 Hz 0,75 1,5 0,75 1,5 Units Cond. Resistance (DC) 20 C 27,6 14,1 27,6 14,1 Ω/km Electrical properties Cond. Resistance (AC) 20 C 27,6 14,1 27,6 14,1 Ω/km Mutual capacitance aprox nf/km Inductance 0,635 0,612 0,721 0,658 mh/km Characteristic properties Impedance Characteristic impedance 27,6 14,1 27,6 14, Ω/km Ω Signal attenuation 0,75 0,57 0,68 0,55 db/km Attenuation (db/km) Frequency (Hz)

24 SELECTION GUIDE CABLE SELECTION Rated voltage Type Armoured Mud resistant Serie Page POWER L.V. 0,6/1 kv P1 RFOU P1/P8 RFOU P18 RU x x x ,6/6 kv P2 RFOU x /10 kv P3 RFOU x ,7/15 kv P4 RFOU x POWER M.V. 12/20 kv 3,6/6 kv P19 RFOU P2/P9 RFOU x x x /10 kv P3/P10 RFOU x x ,7/15 kv P4/P11 RFOU x x /20 kv P19/P21 RFOU x x S1 RFOU(i) x S2 RFOU(c) x x INSTRUMENTA- TION 250 V S11 RU(i) S12 RU(c) S1/S5 RFOU(i) x x S2/S6 RFOU(c) x x

25 CIRCUIT INTEGRITY CABLES (IEC 60331) FIRE RESISTANT Rated voltage Type Armoured Mud resistant Serie Page POWER L.V. 0,6/1 kv P5 BFOU P5/P12 BFOU P17 BU x x x S3 BFOU(i) x S4 BFOU(c) x INSTRUMENTA- TION 250 V S13 BU (i) S14 BU (c) x x S3/S7 BFOU(i) x x S4/S8 BFOU(c) x x CABLES FOR VARIABLE FREQUENCY DRIVES (VFD) Rated voltage Type Armoured Mud resistant Serie Page POWER L.V. 0,6/1 kv RFOU-VFD x x ,6/6 kv x x 7941 POWER M.V. 6/10 kv 8,7/15 kv 12/20 kv RFOU-VFD x x x x x x /30 kv x x

26

27 CABLES FOR OFFSHORE INSTALLATIONS

28 EXZHELLENT 606 Type P1 RFOU MAIN USES AND FEATURES Armoured cables for installation in offshore applications with special performances on flame spread and low emission of smoke and fumes. Oil resistant. Max. rated conductor temperature in normal operation: 90 C. Minimum working temperature -40 ºC. CONSTRUCTION 1. CONDUCTOR Tinned copper, stranded class INSULATION Ethylene Propylene Rubber. IEC Core identification: see pages 21 and INNER COVERING Halogen free compound. 4. BRAID ARMOUR Tinned copper wire braid OUTER SHEATH Thermoset compound type SHF 2. IEC STANDARDS IEC IEC IEC NEK TS 606 IEC IEC IEC IEC IEC POWER Rated voltage: 0,6 / 1 kv Armoured 28

29 (mm 2 ) (kg/km) (mh/km) Nominal cross Weight Inductance (mm) (mm) (V/A. km) Diameter under armour Overall diameter Voltage drop (COS φ=0.8) x1,5 2x2,5 2x4 3x1,5/1,5 3x2,5/2,5 3x4/4 3x6/6 3x10/10 3x16/16 3x25/16 3x35/17,5 3x50/25 3x70/35 3x95/47,5 3x120/60 3x150/75 4x1,5/1,5 4x2,5/2,5 5x1,5 5x2,5 7x1,5 7x2,5 12x1,5 12x2,5 19x1,5 19x2,5 9,0 10,0 11,0 9,5 10,5 11,5 13,5 15,5 17,5 20,5 23,0 26,5 30,0 34,5 41,0 45,5 10,5 11,5 11,5 13,0 12,5 14,0 17,0 18,5 20,0 22,0 12,5 13,5 15,0 13,0 14,5 15,5 17,5 19,5 22,0 25,5 28,0 32,0 36,5 41,0 47,5 52,5 14,5 15,5 16,0 17,0 17,0 18,0 21,5 23,0 24,5 27, ,7 13,5 8,41 21,7 13,5 8,41 5,60 3,35 2,14 1,39 1,02 0,779 0,560 0,427 0,353 0,302 21,7 13,5 21,7 13,5 21,7 13,5 21,7 13,7 21,7 13,5 0,376 0,350 0,328 0,376 0,350 0,328 0,317 0,296 0,281 0,278 0,268 0,264 0,250 0,248 0,231 0,231 0,376 0,350 0,376 0,350 0,376 0,350 0,376 0,350 0,376 0,350 Code 29

30 EXZHELLENT 606 Type P1/P8 RFOU MAIN USES AND FEATURES Armoured cables for installation in offshore applications with special performances on flame spread and low emission of smoke and fumes. Halogen free, oil and mud resistant. Max. rated conductor temperature in normal operation: 90 C. Minimum working temperature -20 ºC. CONSTRUCTION 1. CONDUCTOR Tinned copper, stranded class INSULATION Ethylene Propylene Rubber. IEC Core identification: see pages 21 and INNER COVERING Halogen free compound. 4. BRAID ARMOUR Tinned copper wire braid OUTER SHEATH Thermoset compound mud resistant type SHF Mud. NEK TS STANDARDS IEC IEC IEC NEK TS 606 IEC IEC IEC IEC IEC POWER Rated voltage: 0,6 / 1 kv MUD RESISTANT Armoured 30

31 (mm 2 ) (kg/km) (mh/km) Nominal cross Weight Inductance (mm) (mm) (V/A. km) Diameter under armour Overall diameter Voltage drop (COS φ=0.8) Code 0,384 0,357 0,335 0,384 0,357 0,335 0,324 0,302 0,287 0,284 0,274 0,269 0,255 0,253 0,247 0,244 0,384 0,357 0,376 0,350 0,376 0,350 0,376 0,350 0,376 0,350 25,0 15,6 9,71 21,7 13,5 8,41 5,60 3,35 2,14 1,39 1,02 0,779 0,560 0,427 0,353 0,302 21,7 13,5 21,7 13,5 21,7 13,5 21,7 13,5 21,7 13, ,5 13,5 15,0 13,0 14,5 15,5 17,5 19,5 22,0 25,5 28,0 32,0 36,0 41,5 47,5 52,5 14,5 15,5 16,0 17,0 17,0 18,0 21,5 23,0 24,5 27,0 9,0 10,0 11,0 9,5 10,5 11,5 13,5 15,5 17,5 20,5 23,0 26,5 30,0 35,0 41,0 45,5 10,5 11,5 11,5 13,0 12,5 14,0 17,0 18,5 20,0 22,0 2x1,5 2x2,5 2x4 3x1,5/1,5 3x2,5/2,5 3x4/4 3x6/6 3x10/10 3x16/16 3x25/16 3x35/17,5 3x50/25 3x70/35 3x95/47,5 3x120/60 3x150/75 4x1,5/1,5 4x2,5/2,5 5x1,5 5x2,5 7x1,5 7x2,5 12x1,5 12x2,5 19x1,5 19x2,

32 EXZHELLENT 606 Type P18 RU MAIN USES AND FEATURES Unarmoured cables for installation in offshore applications with special performances on flame spread and low emission of smoke and fumes. Oil resistant. Max. rated conductor temperature in normal operation: 90 C. Minimum working temperature -40 ºC. CONSTRUCTION 1. CONDUCTOR Tinned copper, stranded class INSULATION Ethylene Propylene Rubber. IEC Core identification: see pages 21 and OUTER SHEATH Thermoset compound mud resistant type SHF 2. IEC STANDARDS IEC IEC IEC NEK TS 606 IEC IEC IEC IEC IEC POWER Rated voltage: 0,6 / 1 kv Non armoured 32

33 (mm 2 ) (kg/km) (mh/km) Nominal cross Weight Inductance (mm) (mm) (V/A. km) Diameter under armour Overall diameter Voltage drop (COS φ=0.8) x1,5 2x2,5 2x4 3x1,5/1,5 3x2,5/2,5 3x4/4 3x6/6 3x10/10 3x16/16 3x25/16 3x35/17,5 3x50/25 3x70/35 3x95/47,5 3x120/60 3x150/75 4x1,5/1,5 4x2,5/2,5 4x4/4 4x6/6 4x10/10 4x16/16 4x25/16 4x35/17,5 4x50/25 10,4 11,2 12,3 11,1 12,1 13,1 14,4 16,4 18, ,5 30,5 34,3 39, ,2 12,3 13,3 14,6 16,1 18,3 20,7 24,5 27,3 34, ,7 13,5 8,42 21,7 13,5 8,42 5,61 3,35 2,15 1,39 1,03 0,781 0,563 0,429 0,355 0,304 21,69 13,48 8,42 5,61 3,35 2,15 1,39 1,03 0,781 0,419 0,389 0,364 0,419 0,389 0,364 0,34 0,316 0,299 0,294 0,283 0,277 0,263 0,26 0,253 0,25 0,419 0,389 0,364 0,34 0,316 0,299 0,294 0,283 0,277 Code 33

34 EXZHELLENT 606 Type RFOU MAIN USES AND FEATURES CONSTRUCTION Medium voltage power cables for installation in offshore applications with special performances on flame spread and low emission of smoke and fumes. Oil resistant. Max. rated conductor temperature in normal operation: 90 C. Minimum working temperature -40 ºC. 1. CONDUCTOR Tinned copper, stranded class CONDUCTOR SCREENING Semiconducting material INSULATION Ethylene Propylene Rubber (EPR). IEC INSULATION SCREENING Semiconducting material and tinned copper wire braid. Core identification: see pages 21 and INNER COVERING Halogen free compound. 6. BRAID ARMOUR Tinned copper wire braid. 7. OUTER SHEATH Thermoset compound type SHF 2. IEC STANDARDS IEC IEC IEC NEK TS 606 IEC IEC IEC IEC IEC POWER Rated voltage: 3,6 / 6 kv - 6 / 10 kv - 8,7 / 15 kv - 12 / 20 kv Armoured 34

35 Code (mm 2 ) (kg/km) Nominal cross Weight (mm) (mm) Diameter under armour Overall diameter ohm/km Inductive reactance (μf/km) Capacitance 0,283 0,322 0,359 0,399 0,432 0,526 0,288 0,327 0,359 0,399 0,132 0,125 0,118 0,114 0,110 0,102 0,115 0,109 0,102 0, ,0 26,5 28,0 30,0 31,5 36,5 48,5 52,0 55,0 60,0 20,0 21,5 23,5 25,0 26,5 31,0 41,5 45,0 48,0 52,0 1x50 1x70 1x95 1x120 1x150 1x240 3x50/25 3x70/35 3x95/47,5 3x120/ Type P3 RFOU 0,257 0,288 0,324 0,359 0,389 0,472 0,257 0,288 0,324 0,359 0,135 0,126 0,121 0,115 0,111 0,104 0,117 0,109 0,104 0, ,0 27,5 29,5 31,0 32,5 37,0 49,5 53,0 61,0 62,0 21,0 27,5 24,0 26,0 27,5 31,5 42,5 46,0 53,0 54,0 1x50 1x70 1x95 1x120 1x150 1x240 3x50/25 3x70/35 3x95/47,5 3x120/ Rated voltage: 6/10 kv Type P4 RFOU 0,208 0,233 0,260 0,287 0,309 0,373 0,212 0,233 0,260 0,287 0,140 0,132 0,126 0,121 0,117 0,109 0,124 0,116 0,110 0, ,0 30,0 31,5 34,0 35,5 40,0 59,5 62,5 67,0 70,0 23,0 24,5 26,5 28,5 30,0 34,0 52,0 54,0 58,5 61,5 1x50 1x70 1x95 1x120 1x150 1x240 3x50/25 3x70/35 3x95/47,5 3x120/ Rated voltage: 8,7/15 kv Type P19 RFOU 0,181 0,201 0,223 0,246 0,264 0,316 0,181 0,201 0,223 0,246 0,145 0,136 0,131 0,125 0,121 0,113 0,130 0,120 0,116 0, ,5 32,0 34,5 36,0 38,5 43,5 60,5 64,0 68,5 72,5 25,5 26,5 29,0 30,5 32,0 36,5 52,5 56,0 60,0 63,5 1x50 1x70 1x95 1x120 1x150 1x240 3x50/25 3x70/35 3x95/47,5 3x120/ Rated voltage: 12/20 kv 35 Type P2 RFOU Rated voltage: 3,6/6 kv

36 EXZHELLENT 606 Type RFOU MAIN USES AND FEATURES Medium voltage power armoured cables for installation in offshore applications with special performances on flame spread and low emission of smoke and fumes. Halogen free, oil and mud resistant. Max. rated conductor temperature in normal operation: 90 C. Minimum working temperature -20 ºC. CONSTRUCTION 1. CONDUCTOR Tinned copper, stranded class CONDUCTOR SCREENING Semiconducting material INSULATION Ethylene Propylene Rubber (EPR). IEC INSULATION SCREENING Semiconducting material and tinned copper wire braid. Core identification: see pages 21 and INNER COVERING Halogen free compound. 6. BRAID ARMOUR Tinned copper wire braid. 7. OUTER SHEATH Thermoset compound mud resistant type SHF Mud. NEK TS STANDARDS IEC IEC IEC NEK TS 606 IEC IEC IEC POWER Rated voltage: 3,6 / 6 kv - 6 / 10 kv - 8,7 / 15 kv - 12 / 20 kv MUD RESISTANT Armoured IEC IEC

37 Type P2/P9 RFOU Code (mm 2 ) (kg/km) Nominal cross Weight (mm) (mm) Diameter under armour Overall diameter ohm/km Inductive reactance (μf/km) Capacitance 0,283 0,322 0,359 0,399 0,432 0,526 0,288 0,327 0,359 0,399 0,132 0,125 0,118 0,114 0,110 0,102 0,115 0,109 0,102 0, ,0 26,5 28,0 30,0 31,5 36,5 48,5 52,0 55,0 60,0 20,0 21,5 23,5 25,0 26,5 31,0 41,5 45,0 48,0 52,0 1x50 1x70 1x95 1x120 1x150 1x240 3x50/25 3x70/35 3x95/47,5 3x120/ Rated voltage: 3,6/6 kv Type P3/P10 RFOU 0,257 0,288 0,324 0,359 0,389 0,472 0,257 0,288 0,324 0,359 0,135 0,126 0,121 0,115 0,111 0,104 0,117 0,109 0,104 0, ,0 27,5 29,5 31,0 32,5 37,0 49,5 53,0 61,0 62,0 21,0 27,5 24,0 26,0 27,5 31,5 42,5 46,0 53,0 54,0 1x50 1x70 1x95 1x120 1x150 1x240 3x50/25 3x70/35 3x95/47,5 3x120/ Rated voltage: 6/10 kv Type P4/P11 RFOU 0,208 0,233 0,260 0,287 0,309 0,373 0,212 0,233 0,260 0,287 0,140 0,132 0,126 0,121 0,117 0,109 0,124 0,116 0,110 0, ,0 30,0 31,5 34,0 35,5 40,0 59,5 62,5 67,0 70,0 23,0 24,5 26,5 28,5 30,0 34,0 52,0 54,0 58,5 61,5 1x50 1x70 1x95 1x120 1x150 1x240 3x50/25 3x70/35 3x95/47,5 3x120/ Rated voltage: 8,7/15 kv Type P19/P21 RFOU 0,181 0,201 0,223 0,246 0,264 0,316 0,181 0,201 0,223 0,246 0,145 0,136 0,131 0,125 0,121 0,113 0,130 0,120 0,116 0, ,5 32,0 34,5 36,0 38,5 43,5 60,5 64,0 68,5 72,5 25,5 26,5 29,0 30,5 32,0 36,5 52,5 56,0 60,0 63,5 1x50 1x70 1x95 1x120 1x150 1x240 3x50/25 3x70/35 3x95/47,5 3x120/ Rated voltage: 12/20 kv 37

38 EXZHELLENT 606 Type S1 RFOU (i) MAIN USES AND FEATURES Armoured, individually screened pairs/triples cables for installation in offshore with special performances on flame spread and low emission of smoke and fumes. Oil resistant. Minimum working temperature -40 ºC. CONSTRUCTION 1. CONDUCTOR Tinned copper, stranded class INSULATION Ethylene Propylene Rubber (EPR). IEC Core identification: see pages 21 and INDIVIDUAL SCREEN Copper polyester tape with drain wire INNER COVERING Halogen free compound. 5. BRAID ARMOUR Tinned copper wire braid. 6. OUTER SHEATH Thermoset compound type SHF 2. IEC STANDARDS IEC IEC IEC NEK TS 606 IEC IEC IEC IEC IEC INSTRUMENTATION Rated voltage: 150 / 250 V Armoured & individually screened 38

39 (mm 2 ) (kg/km) Nominal cross Weight (mm) (mm) Diameter under armour Overall diameter x2x1 1x2x1,5 2x2x1 2x2x1,5 4x2x1 4x2x1,5 8x2x1 8x2x1,5 12x2x1 12x2x1,5 16x2x1 16x2x1,5 24x2x1 24x2x1,5 1x3x1 1x3x1,5 2x3x1 2x3x1,5 4x3x1 4x3x1,5 8x3x1 8x3x1,5 12x3x1 12x3x1,5 16x3x1 16x3x1,5 8,5 8,5 13,5 14,0 16,0 16,5 21,0 22,0 26,0 27,0 29,5 30,5 37,0 38,5 8,5 9,0 15,0 15,5 18,0 18,5 24,0 24,5 29,5 30,5 33,0 34,5 11,5 12,0 18,0 18,0 20,0 21,0 26,0 27,0 31,0 32,5 35,0 36,5 43,5 45,5 12,0 12,5 19,5 20,0 22,0 23,0 29,0 29,5 35,0 36,5 39,0 41, Code Electrical parameters and characteristic properties, see page

40 EXZHELLENT 606 Type S2 RFOU (c) MAIN USES AND FEATURES Armoured, colletively screened pairs/triples cables for installation in offshore applications with special performances on flame spread and low emission of smoke and fumes. Oil resistant. Minimum working temperature -40 ºC. CONSTRUCTION 1. CONDUCTOR Tinned copper, stranded class INSULATION Ethylene Propylene Rubber (EPR). IEC Core identification: see pages 21 and INDIVIDUAL SCREEN Copper polyester tape with drain wire. 4. INNER COVERING Halogen free compound. 5. BRAID ARMOUR Tinned copper wire braid. 6. OUTER SHEATH Thermoset compound type SHF 2. IEC STANDARDS IEC IEC IEC NEK TS 606 IEC IEC IEC IEC IEC INSTRUMENTATION Rated voltage: 150 / 250 V Armoured & collectively screened 40

41 Code Nominal cross (mm 2 ) Diameter under armour (mm) Overall diameter (mm) Weight (kg/km) x2x1 9,5 13, x2x1,5 10,0 13, x2x1 13,5 17, x2x1,5 14,0 18, x2x1 16,5 21, x2x1,5 19,5 24, x2x1 20,5 25, x2x1,5 21,5 26, x2x1 22,0 27, x2x1,5 26,0 31, x2x1 28,5 34, x2x1,5 34,0 40, x3x1 10,5 14, x3x1,5 13,5 17, x3x1 12,5 16, x3x1,5 14,5 19, x3x1 15,5 20, x3x1,5 20,5 25, x3x1 19,0 24, x3x1,5 20,0 25, x3x1 20,0 25, x3x1,5 24,0 29, Two pair cables collectively screened are laid up with diametrically opposite cores. Electrical parametres and characteritic properties, see page

42 EXZHELLENT 606 Type S11 RU (i) MAIN USES AND FEATURES Unarmoured, individually screened pairs/triples cables for installation in offshore applications with special performances on flame spread and low emission of smoke and fumes. Oil resistant. Minimum working temperature -40 ºC. CONSTRUCTION 1. CONDUCTOR Tinned copper, stranded class INSULATION Ethylene Propylene Rubber (EPR). IEC Core identification: see pages 21 and INDIVIDUAL SCREEN Copper polyester tape with drain wire BRAID ARMOUR Thermoset compound type SHF 2. IEC STANDARDS IEC IEC IEC NEK TS 606 IEC IEC IEC IEC IEC INSTRUMENTATION Rated voltage: 150 / 250 V MUD RESISTANT Armoured 42

43 (mm 2 ) (kg/km) Nominal cross Weight (mm) Overall diameter x2x0,75 1x2x1,5 1x2x2,5 2x2x0,75 2x2x1,5 2x2x2,5 3x2x0,75 3x2x1,5 3x2x2,5 7x2x0,75 7x2x1,5 7x2x2,5 12x2x0,75 12x2x1,5 12x2x2,5 19x2x0,75 19x2x1,5 19x2x2,5 24x2x0,75 24x2x1,5 24x2x2,5 27x2x0,75 27x2x1,5 27x2x2,5 7,0 8,0 9,0 11,5 13,5 15,0 12,0 14,5 16,0 16,5 19,5 22,0 22,0 26,5 29,5 26,0 31,5 35,5 31,0 37,5 42,0 31,5 38,5 43, Code Electrical parameters and characteristic properties, see page

44 EXZHELLENT 606 Type S12 RU (c) MAIN USES AND FEATURES Unarmoured, colletively screened pairs/triples cables for installation in offshore applications with special performances on flame spread and low emission of smoke and fumes. Oil resistant. Minimum working temperature -40 ºC. CONSTRUCTION 1. CONDUCTOR Tinned copper, stranded class INSULATION Ethylene Propylene Rubber (EPR). IEC Core identification: see pages 21 and COLLECTIVE SCREEN Copper polyester tape with drain wire. 4. OUTER SHEATH Thermoset compound type SHF 2. IEC STANDARDS IEC IEC IEC NEK TS 606 IEC IEC IEC IEC IEC INSTRUMENTATION Rated voltage: 150 / 250 V Collectively screened 44

45 Code Nominal cross (mm 2 ) Overall diameter (mm) Weight (kg/km) x2x0,75 11, x2x1,5 14, x2x2,5 15, x2x0,75 12, x2x1,5 15, x2x2,5 17, x2x0,75 16, x2x1,75 20, x2x0,75 22, x2x1,5 22, x2x2,5 27, x2x2,25 30, x2x0,75 26, x2x1,5 32, x2x2,5 36, x2x0,75 31, x2x1,5 38, x2x2,5 43, x2x0,75 32, x2x1,5 39, x2x2,5 44, Two pair cables collectively screened are laid up with diametrically opposite cores. Electrical parametres and characteritic properties, see page

46 EXZHELLENT 606 Type S1/S5 RFOU (i) MAIN USES AND FEATURES Armoured, individually screened pairs/triples cables for installation in offshore applications with special performances on flame spread and low emission of smoke and fumes. Halogen free, oil and mud resistant. Minimum working temperature -20 ºC. CONSTRUCTION 1. CONDUCTOR Tinned copper, stranded class INSULATION Ethylene Propylene Rubber (EPR). IEC Core identification: see pages 21 and INDIVIDUAL SCREEN Copper polyester tape with drain wire. 4. INNER COVERING Halogen free compound. 5. BRAID ARMOUR Tinned copper wire braid. 6. OUTER SHEATH Thermoset compound mud resistant type SHF Mud. NEK TS STANDARDS IEC IEC IEC NEK TS 606 IEC IEC IEC IEC IEC INSTRUMENTATION Rated voltage: 150 / 250 V MUD RESISTANT Armoured & individual screened 46

47 (mm 2 ) (kg/km) Nominal cross Weight (mm) (mm) Diameter under armour Overall diameter x2x1 1x2x1,5 2x2x1 2x2x1,5 4x2x1 4x2x1,5 8x2x1 8x2x1,5 12x2x1 12x2x1,5 16x2x1 16x2x1,5 24x2x1 24x2x1 1x3x1 1x3x1,5 2x3x1 2x3x1,5 4x3x1 4x3x1,5 8x3x1 8x3x1,5 12x3x1 12x3x1,5 16x3x1 16x3x1,5 8,5 8,5 13,5 14,0 16,0 16,5 21,0 22,0 26,0 27,5 29,5 30,5 36,5 38,0 8,5 9,0 15,0 15,5 18,0 18,5 24,0 24,5 29,5 30,5 33,0 34,5 11,5 12,0 18,0 18,0 20,0 21,0 26,0 27,0 31,0 32,5 35,0 36,0 43,5 45,0 12,0 12,5 19,5 20,0 22,0 23,0 29,0 29,5 35,0 36,5 39,0 41, Code Electrical parameters and characteristic properties, see page

48 EXZHELLENT 606 Type S2/S6 RFOU (c) MAIN USES AND FEATURES Armoured, colectively screened pairs/triples cables for installation in offshore applications with special performances on flame spread and low emission of smoke and fumes. Halogen free, oil and mud resistant. Minimum working temperature -20 ºC. CONSTRUCTION 1. CONDUCTOR Tinned copper, stranded class INSULATION Ethylene Propylene Rubber (EPR). IEC Core identification: see pages 21 and COLLECTIVE SCREEN Copper polyester tape with drain wire. 4. INNER COVERING Halogen free compound. 5. BRAID ARMOUR Tinned copper wire braid. 6. OUTER SHEATH Thermoset compound mud resistant type SHF Mud. NEK TS STANDARDS IEC IEC IEC NEK TS 606 IEC IEC IEC IEC IEC INSTRUMENTATION Rated voltage: 150 / 250 V MUD RESISTANT Armoured & collectively screened 48

49 Code Nominal cross (mm 2 ) Diameter under armour (mm) Overall diameter (mm) Weight (kg/km) x2x1 9,5 13, x2x1,5 10,0 13, x2x1 13,5 17, x2x1,5 14,0 18, x2x1 16,5 21, x2x1,5 17,5 22, x2x1 20,5 25, x2x1,5 21,5 26, x2x1 22,0 27, x2x1,5 22,5 28, x2x1 28,5 34, x2x1,5 29,5 36, x3x1 10,5 14, x3x1,5 12,0 16, x3x1 12,5 16, x3x1,5 14,5 19, x3x1 15,5 20, x3x1,5 18,0 23, x3x1 19,0 24, x3x1,5 20,0 25, x3x1 20,0 25, x3x1,5 24,0 29, Two pair cables collectively screened are laid up with diametrically opposite cores. Electrical parametres and characteritic properties, see page

50 GENFIRE 606 Type P5 BFOU MAIN USES AND FEATURES Armoured cables for installation in offshore applications with special performances on flame spread and low emission of smoke and fumes. Fire and oil resistant. Minimum working temperature -40 ºC. CONSTRUCTION 1. CONDUCTOR Tinned copper, stranded class MICA TAPE 1 3. INSULATION Ethylene Propylene Rubber (EPR). IEC Core identification: see pages 21 and INNER COVERING Halogen free compound. 5. BRAID ARMOUR Tinned copper wire braid. 6. OUTER SHEATH Thermoset compound type SHF 2. IEC STANDARDS IEC IEC IEC IEC IEC IEC NEK TS 606 IEC IEC and -2 IEC IEC POWER Rated voltage: 0,6 / 1 kv FIRE RESISTANT Armoured

51 (mm 2 ) (kg/km) (mh/km) Nominal cross Weight Inductance (mm) (mm) (V/A. km) Diameter under armour Overall diameter Voltage drop (COS φ=0.8) x1,5 2x2,5 2x4 3x1,5/1,5 3x2,5/2,5 3x4/4 3x6/6 3x10/10 3x16/16 3x25/16 3x35/17,5 3x50/25 3x70/35 3x95/47,5 3x120/60 3x150/75 4x1,5/1,5 4x2,5/2,5 5x1,5 5x2,5 7x1,5 7x2,5 12x1,5 12x2,5 19x1,5 10,0 10,5 11,5 10,5 11,5 12,5 13,5 15,5 17, , , ,5 12, ,5 20, , ,5 15,5 16, , ,5 48, ,5 16, ,5 18,5 19,5 23, ,7 13,5 8,42 21,7 13,5 8,42 5,6 3,35 2,15 1,39 1,03 0,78 0,56 0,43 0,35 0, ,41 0,38 0,35 0,41 0,38 0,35 0,33 0,31 0,29 0,29 0,28 0,27 0,26 0,26 0,25 0, Code 51

52 GENFIRE 606 Type P5/P12 BFOU MAIN USES AND FEATURES Armoured cables for installation in offshore applications with special performances on flame spread and low emission of smoke and fumes. Halogen free, fire, oil and mud resistant. Max. rated conductor temperature in normal operation: 90 C. Minimum working temperature -20 ºC. CONSTRUCTION 1. CONDUCTOR Tinned copper, stranded class MICA TAPE 1 3. INSULATION Ethylene Propylene Rubber (EPR). IEC Core identification: see pages 21 and INNER COVERING Halogen free compound. 5. BRAID ARMOUR Tinned copper wire braid. 6. OUTER SHEATH Thermoset compound mud resistant type SHF Mud. NEK TS STANDARDS IEC IEC IEC IEC IEC IEC NEK TS 606 IEC IEC and -2 IEC IEC POWER Rated voltage: 0,6 / 1 kv FIRE & MUD RESISTANT Armoured

53 (mm 2 ) (kg/km) (mh/km) Nominal cross Weight Inductance (mm) (mm) (V/A. km) Diameter under armour Overall diameter Voltage drop (COS φ=0.8) x1,5 2x2,5 2x4 3x1,5/1,5 3x2,5/2,5 3x4/4 3x6/6 3x10/10 3x16/16 3x25/16 3x35/17,5 3x50/25 3x70/35 3x95/47,5 3x120/60 3x150/75 4x1,5/1,5 4x2,5/2,5 5x1,5 5x2,5 7x1,5 7x2,5 12x1,5 12x2,5 19x1,5 10,0 10,5 11,5 10,5 11,5 12,5 13,5 15,5 17, , , ,5 12, ,5 20, , ,5 15,5 16, , ,5 48, ,5 16, ,5 18,5 19,5 23, ,6 13,4 8,42 21,6 13,4 8,42 5,6 3,35 2,15 1,39 1,03 0,78 0,56 0,43 0,35 0, ,41 0,38 0,35 0,41 0,38 0,35 0,33 0,31 0,29 0,29 0,28 0,27 0,26 0,26 0,25 0, Code 53

54 GENFIRE 606 Type P17 BU MAIN USES AND FEATURES Unarmoured cables for installation in offshore applications with special performances on flame spread and low emission of smoke and fumes. Halogen free, fire, oil and mud resistant. Max. rated conductor temperature in normal operation: 90 C. Minimum working temperature -20 ºC. CONSTRUCTION 1. CONDUCTOR Tinned copper, stranded class MICA TAPE INSULATION Ethylene Propylene Rubber (EPR). IEC Core identification: see pages 21 and OUTER SHEATH Thermoset compound mud resistant type SHF Mud. NEK TS STANDARDS IEC IEC IEC IEC IEC IEC NEK TS 606 IEC IEC and -2 IEC IEC INSTRUMENTATION Rated voltage: 0,6 / 1 kv FIRE RESISTANT Non amoured

55 (mm 2 ) (kg/km) (mh/km) Nominal cross Weight Inductance (mm) (V/A. km) Overall diameter Voltage drop (COS φ=0.8) x1,5 2x2,5 2x4 3x1,5/1,5 3x2,5/2,5 3x4/4 3x6/6 3x10/10 3x16/16 3x25/16 3x35/17,5 3x50/25 3x70/35 3x95/47,5 3x120/60 3x150/75 4x1,5/1,5 4x2,5/2,5 4x4/4 4x6/6 4x10/10 4x16/16 4x25/16 4x35/17 4x50/25 9, , , , ,5 10, ,5 17, , ,7 13,5 8,41 21,7 13,5 8,41 5,57 3,32 2,12 1,37 1,01 0,76 0,54 0,41 0,34 0,29 21,68 13,47 8,41 5,57 3,32 2,12 1,37 1,01 0,76 0,38 0,36 0,34 0,38 0,36 0,34 0,22 0,22 0,22 0,22 0,21 0,21 0,2 0,2 0,2 0,2 0,38 0,36 0,34 0,22 0,22 0,22 0,22 0,21 0,21 Code 55

56 GENFIRE 606 Type S3 BFOU (i) MAIN USES AND FEATURES Armoured, individualy screened pairs/triples cables for installation in offshore applications with special performances of non fire propagation and low emission of smoke and fumes. Fire and oil resistant. Minimum working temperature -40 ºC. CONSTRUCTION 1. CONDUCTOR Tinned copper, stranded class 2. Thermoset comp NEK TS MICA TAPE INSULATION Ethylene Propylene Rubber (EPR). IEC Core identification: see pages 21 and INDIVIDUAL SCREEN Copper polyester tape with drain wire. 5. INNER COVERING Halogen free compound. 6. BRAID ARMOUR Tinned copper wire braid. 7. OUTER SHEATH 7 56 STANDARDS IEC IEC IEC IEC IEC IEC NEK TS 606 IEC IEC and -2 IEC IEC INSTRUMENTATION Rated voltage: 150 / 250 V FIRE RESISTANT Armoured & individual screened

57 (mm 2 ) (kg/km) Nominal cross Weight (mm) (mm) Diameter under armour Overall diameter x2x1 1x2x1,5 2x2x1 2x2x1,5 4x2x1 4x2x1,5 8x2x1 8x2x1,5 12x2x1 12x2x1,5 16x2x1 16x2x1,5 24x2x1 24x2x1,5 1x3x1 1x3x1,5 2x3x1 2x3x1,5 4x3x1 4x3x1,5 8x3x1 8x3x1,5 12x3x1 12x3x1,5 16x3x1 16x3x1,5 9,0 9,5 14,5 15,0 17,5 18,0 23,0 24,0 29,5 29,5 32,5 33,5 41,0 42,0 9,5 10,0 16,5 17,0 19,5 20,0 26,0 27,5 32,5 33,5 36,5 38,0 12,5 12,5 19,0 19,5 22,0 22,5 28,0 29,0 35,0 35,5 38,5 39,5 48,0 49,5 13,0 13,0 21,0 21,5 24,0 25,0 31,0 32,5 38,5 39,5 43,0 45, Code Electrical parameters and characteristic properties, see page

58 GENFIRE 606 Type S4 BFOU (c) MAIN USES AND FEATURES Armoured, collectively screened pairs/triples cables for installation in offshore applications with special performances on flame spread and low emission of smoke and fumes. Fire and oil resistant. Minimum working temperature -40 ºC. CONSTRUCTION 1. CONDUCTOR Tinned copper, stranded class MICA TAPE INSULATION Ethylene Propylene Rubber (EPR). IEC Core identification: see pages 21 and COLLECTIVE SCREEN Copper polyester tape with drain wire. 5. INNER COVERING Halogen free compound. 6. BRAID ARMOUR Tinned copper wire braid. 7. OUTER SHEATH Thermoset compound type SHF 2. IEC STANDARDS IEC IEC IEC IEC IEC IEC NEK TS 606 IEC IEC and -2 IEC IEC INSTRUMENTATION Rated voltage: 150 / 250 V FIRE RESISTANT Armoured & collectively screened