CABLE SPECIFICATION CAN CAB RJ45-SUBD9

Transcription

1 CABLE SPECIFICATION All technical information contained in this document is the exclusive property of STI and may neither be used nor disclosed without its prior written consent. AAV /8

2 Connector 1 Cable Connector 2 1. CONNECTORS 1.1. Connector 1 : Male RJ45 Male RJ45 Black cap protection for click SHIELDED MODULAR PLUG 8 POSITIONS AAV /8

3 1.2. Connector 2 Female straight SUBD9 equipped with two captived screws SubD 9 equipped with 9 HE5 contacts female for AWG26 wires and with 2 captived screws which permit the screwing in a male subd9 with UNC 4-40 nut inserts on the back of the connector 1.3. Contact plating Connector 1 Connector 2 Gold plating protection : plating thickness in accordance with HE5 tin lead connectors with grounding metallic finger in according with: HE501. MIL C 24308C. NFC DIN Connector with male contacts for crimp-on or CAD type for AWG22 TO size contact (1mm diameter) 1.4. Connector 1 overmolding Connection for grounding continuity -Material : PVC UL -Color : BLACK -Finition : A 16daN overmoded mechanical retention is required when applying a traction on cable with locked connector. -Grounding continuity 0,4 Connector Molding material Shielding harness Wire crimped on contact Shielding can AAV /8

4 1.5. Connector 2 overall dimensions A Female straight SUBD9 equiped with two captived screws 52 MAX A MAX 15 MAXI Resistor embedded inside SUBD9 2. CABLE 2.1 Cable length Cable length: see parameter Schneider Industrial Part Number AAV338 Cable Length 1.0 m AAV /8

5 2.2 Cable cross section CAN_H CAN_L 1 2 COATING WRAPPING TAPE INSULATION BRAINDING WRAPPING TAPE INSULATION CONDUCTORS CHARACTERISTICS _ Number of strands : 07x0.163mm _ Conductor diameter : 0.50mm CAN_GND Cable color Note : Magenta or Violet are two naming of same colour recommended by DESINA under reference RAL41 : 2.4 Cable shielding Zt (mohm/mètre) The shielding ensuring the behaviour with the radiation in industrial environment requires an effectiveness > 30dB between 27 & 5MHz. The behaviour with the electrostatic discharges applied to the equipment on which the cables are connected, is characterized by a value of the impedance of transfer, Zt having to remain < or equal to those defined by the above chart Pente 6 mohm/mètre/mhz mohm/mètre Fréquence (MHz) AAV /8

6 2.5 Wiring co n n ecto r shielding harness is connected C A N _H C A N _L C A N _L CAN_G ND CAN_G ND C A N _H N o te : A ll w ire s w ith o u t c o n n e c tio n s C onnector 1 w ill be cut dow n C onnector 2 CONNECTOR 2 Resistor specification: 120 +/- 5% ohms, ¼ W Working Temperature 85 C max Schneider Item number for the resistor : SZ1RA4121 Short Description: CF25-J-120R-AMMOP 52 KAYOCO R-25-J-120R-SMS-AMMOP FIRSTOHM CFR0S4J0121T50 ROYAL PARTS KAYOCOserieCF_JW _ZO[1].pdf ROYALPARTSserieca talogue20.doc FIRSTOHMserieR[1]. pdf AAV /8

7 3. Cable marking Connector 1 Marking areas Connector 2 50 to 1mm Area1 Area3 Area2 TAP/DRIVE LMC - RESISTOR Telémecanique / VW3 M3 805 R010 / CAN cable / AAV338 YYWW X Commercial reference Cable name Schneider industrial part number year Manufacturer name week Marking with ink throw or white inking-pad 4. Packaging Configuration for delivery Packaging : Individual transparent plastic bag ( polyethylene ) closed by thermowelding. 2 max 2 max ELECTRICAL AND MECHANICAL SPECIFICATION LINEAR RESISTANCE 60 /KM 5 /KM A 80C CAPACITY BETWEEN PAIR OF CONDUCTORS INSULATION RESISTANCE WIRE /SHIELDING DIELECTRIC VOLTAGE WIRE /SHIELDING MUST BE INDICATED IN SUPPLIER SPECIFICATION (..PF/M) 1 M AT 5 V 1.5 KV EFF 50 HZ DURING 2MN AAV /8

8 IMPEDANCE AT 10 MHZ GROUND CONTINUITY OPERATING VOLTAGE BUNCHED CONDUCTOR, LENGHT OF LAY, O. TWIST NUMBER OF PAIRS WIRE GAUGE / SECTION EXTRACTION RESISTANCE CABLE CORE MATERIAL INSULATION AND COLOR MATERIAL 20 M / M TEST WITH OHMETER, MUST BE INDICATED IN SUPPLIER SPECIFICATION 5V (DC) YES,WITH LENGHT OF LAY O. TWIST 10MM, 1 PAIR AWG 26 / MM² 16 DAN ANNEALING COPPER WITH TIN PLATING SUPPLE BLACK UL PVC OR POLYETHYLENE CONTACT PLATING SEE 1.3 OPERATING TEMPERATURE RANGE STORAGE TEMPERATURE -20 C A +80 C -40 C A +80 C OIL OR CHEMICAL WIHTSTANDING FIRE RESISTANCE SHOCKS AND VIBRATIONS RESISTANCE ACCORDING TO UL STANDART UL VW-1 IEC ESD WITHSTANDING See SHEET 6 CABLE FLEXIBILITY Flexible X Very flexible Extra flexible BENDING RADIUS OVERALL DIAMETER SHIELDING 50 MM MINIMUM REFER TO SUPPLIER SPECIFICATION : TOL= 1MM TIN PLATED COPPER Silicon forbidden RoHS RECOGNIZED FOLLOWING TO THE DIRECTIVE 22/95/EC OF 27JAN03 ON THE RESTRICTION OF THE USE OF CERTAIN HAZARDOUS SUBSTANCE MATERIAL HAS TO COMPLY WITH THE SPECIFICATION A06 AAV /8