Power MOSFET FEATURES. IRL540PbF SiHL540-E3 IRL540 SiHL540

Save this PDF as:
 WORD  PNG  TXT  JPG

Size: px
Start display at page:

Download "Power MOSFET FEATURES. IRL540PbF SiHL540-E3 IRL540 SiHL540"

Transcription

1 Power MOSFET PRODUCT SUMMARY (V) 100 R DS(on) (Ω) = 5.0 V Q g (Max.) (nc) 64 Q gs (nc) 9.4 Q gd (nc) 27 Configuration Single TO220AB G DS ORDERING INFORMATION Package Lead (Pb)free SnPb G D S NChannel MOSFET FEATURES Dynamic dv/dt Rating Repetitive Avalanche Rated LogicLevel Gate Drive R DS(on) Specified at = 4 V and 5 V 175 C Operating Temperature Fast Switching Ease of Paralleling Compliant to RoHS Directive 2002/95/EC Available RoHS* COMPLIANT DESCRIPTION Third generation Power MOSFETs from Vishay provide the designer with the best combination of fast switching, ruggedized device design, low onresistance and costeffectiveness. The TO220AB package is universally preferred for all commercialindustrial applications at power dissipation levels to approximately 50 W. The low thermal resistance and low package cost of the TO220AB contribute to its wide acceptance throughout the industry. TO220AB IRL540PbF SiHL540E3 IRL540 SiHL540 ABSOLUTE MAXIMUM RATINGS (T C = 25 C, unless otherwise noted) PARAMETER SYMBOL LIMIT UNIT DrainSource Voltage 100 GateSource Voltage ± 10 V Continuous Drain Current at 5.0 V T C = 25 C 28 I D T C = 100 C 20 A Pulsed Drain Current a I DM 110 Linear Derating Factor 1.0 W/ C Single Pulse Avalanche Energy b E AS 440 mj Avalanche Current a I AR 28 A Repetitive Avalanche Energy a E AR 15 mj Maximum Power Dissipation T C = 25 C P D 150 W Peak Diode Recovery dv/dt c dv/dt 5.5 V/ns Operating Junction and Storage Temperature Range T J, T stg 55 to 175 Soldering Recommendations (Peak Temperature) for 10 s 300 d C Mounting Torque 632 or M3 screw Notes a. Repetitive rating; pulse width limited by maximum junction temperature (see fig. 11). b. V DD = 25 V, starting T J = 25 C, L = 841 μh, R g = 25 Ω, I AS = 28 A (see fig. 12c). c. I SD 28 A, di/dt 170 A/μs, V DD, T J 175 C. d. 1.6 mm from case. 10 lbf in 1.1 N m * Pb containing terminations are not RoHS compliant, exemptions may apply Document Number: S110519Rev. B, 21Mar11 1

2 THERMAL RESISTANCE RATINGS PARAMETER SYMBOL TYP. MAX. UNIT Maximum JunctiontoAmbient R thja 62 CasetoSink, Flat, Greasd Surface R thcs 0.50 C/W Maximum JunctiontoCase (Drain) R thjc 1.0 SPECIFICATIONS (T J = 25 C, unless otherwise noted) PARAMETER SYMBOL TEST CONDITIONS MIN. TYP. MAX. UNIT Static DrainSource Breakdown Voltage = 0 V, I D = 250 μa 100 V Temperature Coefficient Δ /T J Reference to 25 C, I D = 1 ma 0.12 V/ C GateSource Threshold Voltage (th) =, I D = 250 μa V GateSource Leakage I GSS = ± 10 V ± 100 na = 100 V, = 0 V 25 Zero Gate Voltage Drain Current I DSS = 80 V, = 0 V, T J = 150 C 250 μa DrainSource OnState Resistance R DS(on) = 5.0 V I D = 17 A b = 4.0 V I D = 14 A b 0.11 Ω Forward Transconductance g fs = 50 V, I D = 17 A 12 S Dynamic Input Capacitance C iss = 0 V, 2200 Output Capacitance C oss = 25 V, 560 pf Reverse Transfer Capacitance C rss f = 1.0 MHz, see fig Total Gate Charge Q g 64 GateSource Charge Q gs I = 5.0 V D = 28 A, = 80 V, see fig. 6 and 13 b 9.4 nc GateDrain Charge Q gd 27 TurnOn Delay Time t d(on) 8.5 Rise Time t r V DD = 50 V, I D = 28 A, 170 TurnOff Delay Time t d(off) R g = 9.0 Ω, R D = 1.7 Ω, see fig. 10 b 35 ns Fall Time t f 80 Between lead, D Internal Drain Inductance L D mm (0.25") from package and center of nh G Internal Source Inductance L S die contact 7.5 DrainSource Body Diode Characteristics MOSFET symbol D Continuous SourceDrain Diode Current I S 28 showing the integral reverse Pulsed Diode Forward Current a G I SM p n junction diode 110 S A Body Diode Voltage V SD T J = 25 C, I S = 28 A, = 0 V b 2.5 V Body Diode Reverse t rr ns Recovery Time T J = 25 C, I F = 28 A, di/dt = 100 A/μs b Body Diode Reverse Recovery Charge Q rr μc Forward TurnOn Time t on Intrinsic turnon time is negligible (turnon is dominated by L S and L D ) Notes a. Repetitive rating; pulse width limited by maximum junction temperature (see fig. 11). b. Pulse width 300 μs; duty cycle 2 %. S Document Number: S110519Rev. B, 21Mar11

3 TYPICAL CHARACTERISTICS (25 C, unless otherwise noted) Fig. 1 Typical Output Characteristics, T C = 25 C Fig. 3 Typical Transfer Characteristics Fig. 2 Typical Output Characteristics, T C = 175 C Fig. 4 Normalized OnResistance vs. Temperature Document Number: S110519Rev. B, 21Mar11 3

4 Fig. 5 Typical Capacitance vs. DraintoSource Voltage Fig. 7 Typical SourceDrain Diode Forward Voltage Fig. 6 Typical Gate Charge vs. GatetoSource Voltage Fig. 8 Maximum Safe Operating Area Document Number: S110519Rev. B, 21Mar11

5 R D R G D.U.T. V DD 5 V Pulse width 1 µs Duty factor 0.1 % Fig. 10a Switching Time Test Circuit 90 % 10 % t d(on) t r t d(off) t f Fig. 9 Maximum Safe Operating Area Fig. 10b Switching Time Waveforms Fig. 11 Maximum Effective Transient Thermal Impedance, JunctiontoCase Document Number: S110519Rev. B, 21Mar11 5

6 L Vary t p to obtain required I AS R G D.U.T. I AS V DD t p V DD 5 V t p 0.01 Ω I AS Fig. 12a Unclamped Inductive Test Circuit Fig. 12b Unclamped Inductive Waveforms Fig. 12c Maximum Avalanche Energy vs. Drain Current Current regulator Same type as D.U.T. Q G 50 kω 12 V 0.2 µf 0.3 µf Q GS Q GD D.U.T. V DS V G Charge Fig. 13a Basic Gate Charge Waveform 3 ma Fig. 13b Gate Charge Test Circuit I G I D Current sampling resistors Document Number: S110519Rev. B, 21Mar11

7 Peak Diode Recovery dv/dt Test Circuit D.U.T. Circuit layout considerations Low stray inductance Ground plane Low leakage inductance current transformer R g dv/dt controlled by R g Driver same type as D.U.T. I SD controlled by duty factor D D.U.T. device under test V DD Driver gate drive P.W. Period D = P.W. Period = 10 V a D.U.T. l SD waveform Reverse recovery current Body diode forward current di/dt D.U.T. waveform Diode recovery dv/dt V DD Reapplied voltage Inductor current Body diode forward drop Ripple 5 % I SD Note a. = 5 V for logic level devices Fig. 14 For NChannel maintains worldwide manufacturing capability. Products may be manufactured at one of several qualified locations. Reliability data for Silicon Technology and Package Reliability represent a composite of all qualified locations. For related documents such as package/tape drawings, part marking, and reliability data, see Document Number: S110519Rev. B, 21Mar11 7

8 Package Information TO2201 D L H(1) Q L(1) 1 E 2 3 M * b(1) Ø P A F DIM. MILLIMETERS INCHES MIN. MAX. MIN. MAX. A b b(1) c D E e e(1) F H(1) J(1) L L(1) Ø P Q ECN: X150364Rev. C, 14Dec15 DWG: 6031 Note M* = inches to inches (dimension including protrusion), heatsink hole for HVM e b C e(1) J(1) ASE Package Picture Xi an Revison: 14Dec15 1 Document Number: For technical questions, contact: THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT

9 Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, Vishay ), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, noninfringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer s technical experts. Product specifications do not expand or otherwise modify Vishay s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, lifesaving, or lifesustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Revision: 13Jun16 1 Document Number: 91000

Power MOSFET FEATURES. IRF520PbF SiHF520-E3 IRF520 SiHF520. PARAMETER SYMBOL LIMIT UNIT Drain-Source Voltage V DS 100 V Gate-Source Voltage V GS ± 20

Power MOSFET FEATURES. IRF520PbF SiHF520-E3 IRF520 SiHF520. PARAMETER SYMBOL LIMIT UNIT Drain-Source Voltage V DS 100 V Gate-Source Voltage V GS ± 20 Power MOSFET PRODUCT SUMMARY (V) 100 R DS(on) ( ) = 0.7 Q g (Max.) (nc) 16 Q gs (nc) 4.4 Q gd (nc) 7.7 Configuration Single TO0AB G DS ORDERING INFORMATION Package Lead (Pb)free SnPb G D S NChannel MOSFET

More information

Power MOSFET. IRF9520PbF SiHF9520-E3 IRF9520 SiHF9520. PARAMETER SYMBOL LIMIT UNIT Drain-Source Voltage V DS - 100 V Gate-Source Voltage V GS ± 20

Power MOSFET. IRF9520PbF SiHF9520-E3 IRF9520 SiHF9520. PARAMETER SYMBOL LIMIT UNIT Drain-Source Voltage V DS - 100 V Gate-Source Voltage V GS ± 20 Power MOSFET PRODUCT SUMMARY (V) 100 R DS(on) ( ) = 10 V 0.60 Q g (Max.) (nc) 18 Q gs (nc) 3.0 Q gd (nc) 9.0 Configuration Single TO220AB G DS ORDERING INFORMATION Package Lead (Pb)free SnPb G S D PChannel

More information

N-Channel 60-V (D-S), 175 C MOSFET

N-Channel 60-V (D-S), 175 C MOSFET N-Channel 6-V (D-S), 75 C MOSFET SUP/SUB7N6-4 V (BR)DSS (V) r DS(on) ( ) (A) 6.4 7 a TO-22AB D TO-263 DRAIN connected to TAB G G D S Top View SUP7N6-4 G D S Top View SUB7N6-4 S N-Channel MOSFET Parameter

More information

N-Channel 20-V (D-S) 175 C MOSFET

N-Channel 20-V (D-S) 175 C MOSFET N-Channel -V (D-S) 75 C MOSFET SUD7N-4P PRODUCT SUMMARY V DS (V) r DS(on) ( ) (A) a.37 @ V GS = V 37.6 @ V GS = 4.5 V 9 TO-5 D FEATURES TrenchFET Power MOSFET 75 C Junction Temperature PWM Optimized for

More information

Power MOSFET FEATURES. IRFSL11N50APbF SiHFSL11N50A-E3. PARAMETER SYMBOL LIMIT UNIT Drain-Source Voltage V DS 500 V Gate-Source Voltage V GS ± 30

Power MOSFET FEATURES. IRFSL11N50APbF SiHFSL11N50A-E3. PARAMETER SYMBOL LIMIT UNIT Drain-Source Voltage V DS 500 V Gate-Source Voltage V GS ± 30 Power MOFET IRFL11N50, ihfl11n50 PRODUCT UMMRY V D (V) 500 R D(on) ( ) V G = 10 V 0.55 Q g (Max.) (nc) 51 Q gs (nc) 12 Q gd (nc) 23 Configuration ingle I 2 PK (TO262) G D FETURE Dynamic dv/dt Rating Repetitive

More information

IRLR8729PbF IRLU8729PbF

IRLR8729PbF IRLU8729PbF Applications l High Frequency Synchronous Buck Converters for Computer Processor Power l High Frequency Isolated DC-DC Converters with Synchronous Rectification for Telecom and Industrial Use Benefits

More information

Dual P-Channel 2.5 V (G-S) MOSFET

Dual P-Channel 2.5 V (G-S) MOSFET Si593DC Dual P-Channel.5 V (G-S) MOSFET PRODUCT SUMMARY V DS (V) R DS(on) (Ω) I D (A).55 at V GS = -.5 V ±.9 -.8 at V GS = - 3.6 V ±.7.6 at V GS = -.5 V ±. FEATURES Halogen-free According to IEC 69-- Definition

More information

UNISONIC TECHNOLOGIES CO., LTD 50N06 Power MOSFET

UNISONIC TECHNOLOGIES CO., LTD 50N06 Power MOSFET UNISONIC TECHNOLOGIES CO., LTD 50N06 50 Amps, 60 Volts N-CHANNEL POWER MOSFET DESCRIPTION TO-263 TO-25 The UTC 50N06 is three-terminal silicon device with current conduction capability of about 50A, fast

More information

SMPS MOSFET. V DSS R DS (on) max I D

SMPS MOSFET. V DSS R DS (on) max I D Applications l Switch Mode Power Supply (SMPS) l Uninterruptable Power Supply l High speed power switching SMPS MOSFET PD 93773A IRF820A HEXFET Power MOSFET V DSS R DS (on) max I D 500V 3.0Ω 2.5A Benefits

More information

TSM020N03PQ56 30V N-Channel MOSFET

TSM020N03PQ56 30V N-Channel MOSFET PDFN56 Pin Definition: 1. Source 8. Drain 2. Source 7. Drain 3. Source 6. Drain 4. Gate 5. Drain Key Parameter Performance Parameter Value Unit V DS 30 V R DS(on) (max) V GS = 10V 2 V GS = 4.5V 3 mω Q

More information

Lower Conduction Losses Low Thermal Resistance to PCB ( 0.5 C/W)

Lower Conduction Losses Low Thermal Resistance to PCB ( 0.5 C/W) PD -97428 IRFH5020PbF HEXFET Power MOSFET V DS 200 V 55 m: R DS(on) max (@V GS = V) Q g (typical) 36 nc R G (typical).9 : I D (@T c(bottom) = 25 C) 43 A PQFN 5X6 mm Applications Secondary Side Synchronous

More information

STB4NK60Z, STB4NK60Z-1, STD4NK60Z STD4NK60Z-1, STP4NK60Z,STP4NK60ZFP

STB4NK60Z, STB4NK60Z-1, STD4NK60Z STD4NK60Z-1, STP4NK60Z,STP4NK60ZFP STB4NK60Z, STB4NK60Z-1, STD4NK60Z STD4NK60Z-1, STP4NK60Z,STP4NK60ZFP N-channel 600 V - 1.76 Ω - 4 A SuperMESH Power MOSFET DPAK - D 2 PAK - IPAK - I 2 PAK - TO-220 - TO-220FP Features Type V DSS R DS(on)

More information

STP80NF55-08 STB80NF55-08 STB80NF55-08-1 N-CHANNEL 55V - 0.0065 Ω - 80A D2PAK/I2PAK/TO-220 STripFET II POWER MOSFET

STP80NF55-08 STB80NF55-08 STB80NF55-08-1 N-CHANNEL 55V - 0.0065 Ω - 80A D2PAK/I2PAK/TO-220 STripFET II POWER MOSFET STP80NF55-08 STB80NF55-08 STB80NF55-08-1 N-CHANNEL 55V - 0.0065 Ω - 80A D2PAK/I2PAK/TO-220 STripFET II POWER MOSFET TYPE V DSS R DS(on) I D STB80NF55-08/-1 STP80NF55-08 55 V 55 V

More information

Dual P-Channel 40 V (D-S) MOSFET

Dual P-Channel 40 V (D-S) MOSFET Si7905DN Dual P-Channel 0 V (D-S) MOSFET PRODUCT SUMMARY V DS (V) R DS(on) ( ) I D (A) Q g (Typ.) - 0 0.060 at V GS = - 0 V - 6 e nc 0.089 at V GS = -.5V - 5 f FEATURES Halogen-free According to IEC 69--

More information

STP62NS04Z N-CHANNEL CLAMPED 12.5mΩ - 62A TO-220 FULLY PROTECTED MESH OVERLAY MOSFET

STP62NS04Z N-CHANNEL CLAMPED 12.5mΩ - 62A TO-220 FULLY PROTECTED MESH OVERLAY MOSFET N-CHANNEL CLAMPED 12.5mΩ - 62A TO-220 FULLY PROTECTED MESH OVERLAY MOSFET TYPE V DSS R DS(on) I D STP62NS04Z CLAMPED

More information

Schottky Rectifier, 100 A

Schottky Rectifier, 100 A Schottky Rectifier, A VS-BGQ Cathode Anode PowerTab PRODUCT SUMMARY Package PowerTab I F(AV) A V R V V F at I F 0.82 V I RM 180 ma at 125 C T J max. 175 C Diode variation Single die E AS 9 mj FEATURES

More information

STW34NB20 N-CHANNEL 200V - 0.062 Ω - 34A TO-247 PowerMESH MOSFET

STW34NB20 N-CHANNEL 200V - 0.062 Ω - 34A TO-247 PowerMESH MOSFET N-CHANNEL 200V - 0.062 Ω - 34A TO-247 PowerMESH MOSFET Table 1. General Features Figure 1. Package Type V DSS R DS(on) I D STW34NB20 200 V < 0.075 Ω 34 A FEATURES SUMMARY TYPICAL R DS(on) = 0.062 Ω EXTREMELY

More information

IRF3710. HEXFET Power MOSFET V DSS = 100V. R DS(on) = 23mΩ I D = 57A

IRF3710. HEXFET Power MOSFET V DSS = 100V. R DS(on) = 23mΩ I D = 57A PD - 91309C IRF37 HEXFET Power MOSFET Advanced Process Technoogy Utra Low On-Resistance Dynamic dv/dt Rating 175 C Operating Temperature Fast Switching Fuy Avaanche Rated G D S V DSS = 0V R DS(on) = 23mΩ

More information

OptiMOS 3 Power-Transistor

OptiMOS 3 Power-Transistor Type IPD36N4L G OptiMOS 3 Power-Transistor Features Fast switching MOSFET for SMPS Optimized technology for DC/DC converters Qualified according to JEDEC ) for target applications Product Summary V DS

More information

STP10NK60Z/FP, STB10NK60Z/-1 STW10NK60Z N-CHANNEL 600V-0.65Ω-10A TO-220/FP/D 2 PAK/I 2 PAK/TO-247 Zener-Protected SuperMESH Power MOSFET

STP10NK60Z/FP, STB10NK60Z/-1 STW10NK60Z N-CHANNEL 600V-0.65Ω-10A TO-220/FP/D 2 PAK/I 2 PAK/TO-247 Zener-Protected SuperMESH Power MOSFET STP10NK60Z/FP, STB10NK60Z/-1 STW10NK60Z N-CHANNEL 600V-0.65Ω-10A TO-220/FP/D 2 PAK/I 2 PAK/TO-247 Zener-Protected SuperMESH Power MOSFET TYPE V DSS R DS(on) I D Pw STP10NK60Z STP10NK60ZFP STB10NK60Z STB10NK60Z-1

More information

High Performance Schottky Rectifier, 1 A

High Performance Schottky Rectifier, 1 A High Performance Schottky Rectifier, A VS-MQNPbF Cathode Anode DO-24AC (SMA) PRODUCT SUMMARY Package DO-24AC (SMA) I F(AV) A V R V V F at I F.78 V I RM ma at 25 C T J max. 5 C Diode variation Single die

More information

NTMS4920NR2G. Power MOSFET 30 V, 17 A, N Channel, SO 8 Features

NTMS4920NR2G. Power MOSFET 30 V, 17 A, N Channel, SO 8 Features NTMS9N Power MOSFET 3 V, 7 A, N Channel, SO Features Low R DS(on) to Minimize Conduction Losses Low Capacitance to Minimize Driver Losses Optimized Gate Charge to Minimize Switching Losses These Devices

More information

STP6NK60Z - STP6NK60ZFP STB6NK60Z - STB6NK60Z-1 N-CHANNEL 600V - 1Ω - 6A TO-220/TO-220FP/D 2 PAK/I 2 PAK Zener-Protected SuperMESH Power MOSFET

STP6NK60Z - STP6NK60ZFP STB6NK60Z - STB6NK60Z-1 N-CHANNEL 600V - 1Ω - 6A TO-220/TO-220FP/D 2 PAK/I 2 PAK Zener-Protected SuperMESH Power MOSFET STP6NK60Z - STP6NK60ZFP STB6NK60Z - STB6NK60Z-1 N-CHANNEL 600V - 1Ω - 6A TO-220/TO-220FP/D 2 PAK/I 2 PAK Zener-Protected SuperMESH Power MOSFET TYPE V DSS R DS(on) I D Pw STP6NK60Z STP6NK60ZFP STB6NK60Z

More information

A I DM. -55 to + 175 T STG. Storage Temperature Range C Soldering Temperature, for 10 seconds 300 (1.6mm from case) Mounting torque, 6-32 or M3 screw

A I DM. -55 to + 175 T STG. Storage Temperature Range C Soldering Temperature, for 10 seconds 300 (1.6mm from case) Mounting torque, 6-32 or M3 screw IGITL UIO MOSFET P 9673 IRFB565PbF Features Key Parameters Optimized for Class udio mplifier pplications Low R SON for Improved Efficiency Low Q G and Q SW for Better TH and Improved Efficiency Low Q RR

More information

SSM3K335R SSM3K335R. 1. Applications. 2. Features. 3. Packaging and Pin Configuration. 2012-07-19 Rev.3.0. Silicon N-Channel MOS (U-MOS -H)

SSM3K335R SSM3K335R. 1. Applications. 2. Features. 3. Packaging and Pin Configuration. 2012-07-19 Rev.3.0. Silicon N-Channel MOS (U-MOS -H) MOSFETs Silicon N-Channel MOS (U-MOS-H) SSM3K335R SSM3K335R 1. Applications Power Management Switches DC-DC Converters 2. Features (1) 4.5-V gate drive voltage. (2) Low drain-source on-resistance : R DS(ON)

More information

Symbol Parameter Value Unit V DS Drain-source Voltage (V GS =0) 50 V V DGR Drain- gate Voltage (R GS =20kΩ) 50 V

Symbol Parameter Value Unit V DS Drain-source Voltage (V GS =0) 50 V V DGR Drain- gate Voltage (R GS =20kΩ) 50 V BUZ71A N - CHANNEL 50V - 0.1Ω - 13A TO-220 STripFET POWER MOSFET TYPE V DSS R DS(on) I D BUZ71A 50 V < 0.12 Ω 13 A TYPICAL RDS(on) = 0.1 Ω AVALANCHE RUGGED TECHNOLOGY 100% AVALANCHE TESTED HIGH CURRENT

More information

MTD3055VT4. http://onsemi.com. MAXIMUM RATINGS (T C = 25 C unless otherwise noted) MARKING DIAGRAMS ORDERING INFORMATION. R DS(on) TYP 60 V 100 m

MTD3055VT4. http://onsemi.com. MAXIMUM RATINGS (T C = 25 C unless otherwise noted) MARKING DIAGRAMS ORDERING INFORMATION. R DS(on) TYP 60 V 100 m MTD55V Preferred Device Power MOSFET Amps, 6 Volts NChannel This Power MOSFET is designed to withstand high energy in the avalanche and commutation modes. Designed for low voltage, high speed switching

More information

IRF830. N - CHANNEL 500V - 1.35Ω - 4.5A - TO-220 PowerMESH MOSFET

IRF830. N - CHANNEL 500V - 1.35Ω - 4.5A - TO-220 PowerMESH MOSFET IRF830 N - CHANNEL 500V - 1.35Ω - 4.5A - TO-220 PowerMESH MOSFET TYPE V DSS R DS(on) I D IRF830 500 V < 1.5 Ω 4.5 A TYPICAL R DS(on) = 1.35 Ω EXTREMELY HIGH dv/dt CAPABILITY 100% AVALANCHE TESTED VERY

More information

700 MHz, -3 db Bandwidth; Dual SPDT Analog Switch

700 MHz, -3 db Bandwidth; Dual SPDT Analog Switch 7 MHz, -3 db Bandwidth; Dual SPDT Analog Switch DESCRIPTION is a low R ON, high bandwidth analog switch configured in dual SPDT. It achieves 5.5 Ω switch on resistance, greater than 7 MHz -3 db bandwidth

More information

IRFP450. N - CHANNEL 500V - 0.33Ω - 14A - TO-247 PowerMESH MOSFET

IRFP450. N - CHANNEL 500V - 0.33Ω - 14A - TO-247 PowerMESH MOSFET IRFP450 N - CHANNEL 500V - 0.33Ω - 14A - TO-247 PowerMESH MOSFET TYPE V DSS R DS(on) I D IRFP450 500 V < 0.4 Ω 14 A TYPICAL R DS(on) = 0.33 Ω EXTREMELY HIGH dv/dt CAPABILITY 100% AVALANCHE TESTED VERY

More information

Features. TA=25 o C unless otherwise noted

Features. TA=25 o C unless otherwise noted NDSAN N-Channel, Logic Level, PowerTrench MOSFET June NDSAN General Description These N-Channel Logic Level MOSFETs are produced using Fairchild Semiconductor s advanced PowerTrench process that has been

More information

High-Bandwidth, Low Voltage, Dual SPDT Analog Switches

High-Bandwidth, Low Voltage, Dual SPDT Analog Switches DG, DG High-Bandwidth, Low Voltage, Dual SPDT Analog Switches DESCRIPTION The DG/DG are monolithic CMOS dual single-pole/double-throw (SPDT) analog switchs. They are specifically designed for low-voltage,

More information

TOSHIBA Field Effect Transistor Silicon P Channel MOS Type (U-MOS III) TPC8110

TOSHIBA Field Effect Transistor Silicon P Channel MOS Type (U-MOS III) TPC8110 TPC811 TOSHIBA Field Effect Transistor Silicon P Channel MOS Type (U-MOS III) TPC811 Lithium Ion Battery Applications Notebook PC Applications Portable Equipment Applications Unit: mm Small footprint due

More information

STP6N60FI N - CHANNEL ENHANCEMENT MODE POWER MOS TRANSISTOR

STP6N60FI N - CHANNEL ENHANCEMENT MODE POWER MOS TRANSISTOR N - CHANNEL ENHANCEMENT MODE POWER MOS TRANSISTOR TYPE VDSS RDS(on) ID STP6N60FI 600 V < 1.2 Ω 3.8 A TYPICAL R DS(on) =1Ω AVALANCHE RUGGED TECHNOLOGY 100% AVALANCHE TESTED REPETITIVE AVALANCHE DATA AT

More information

Standard Recovery Diodes, Generation 2 DO-5 (Stud Version), 95 A

Standard Recovery Diodes, Generation 2 DO-5 (Stud Version), 95 A Standard Recovery Diodes, Generation 2 DO-5 (Stud Version), 95 A 95PF(R)... DO-203AB (DO-5) PRODUCT SUMMARY I F(AV) Package Circuit configuration 95PF(R)...W DO-203AB (DO-5) 95 A DO-203AB (DO-5) Single

More information

TN2410L, VN2406D/E, VN2410L/LS

TN2410L, VN2406D/E, VN2410L/LS TNL, VN6D/E, VNL/L N-Channel Enhancement-Mode MOFET Transistors Part Number V (BR)D Min (V) r D(on) Max ( ) V (th) (V) (A) TNL @ V =.5 V.5 to.8.8 VN6D 6 @ V = V.8 to. VN6L 6 @ V = V.8 to.8 VNL @ V = V.8

More information

Symbol Parameter Value Unit IAR Avalanche Current, Repetitive or Not-Repetitive

Symbol Parameter Value Unit IAR Avalanche Current, Repetitive or Not-Repetitive BUZ11 N - CHANNEL 50V - 0.03Ω - 30A -TO-220 STripFET POWER MOSFET TYPE V DSS R DS(on) I D BUZ11 50 V < 0.04 Ω 30 A TYPICAL R DS(on) = 0.03 Ω AVALANCHE RUGGED TECHNOLOGY 100% AVALANCHE TESTED HIGH CURRENT

More information

DG2515, DG2516. 3-Ω, 235-MHz Bandwidth, Dual SPDT Analog Switch. Vishay Siliconix. Not for New Design. RoHS COMPLIANT DESCRIPTION FEATURES BENEFITS

DG2515, DG2516. 3-Ω, 235-MHz Bandwidth, Dual SPDT Analog Switch. Vishay Siliconix. Not for New Design. RoHS COMPLIANT DESCRIPTION FEATURES BENEFITS Not for New Design DG, DG -Ω, -MHz Bandwidth, Dual SPDT Analog Switch DESCRIPTION The DG, DG are low-voltage dual single-pole/ double-throw monolithic CMOS analog switches. Designed to operate from.8 V

More information

AN11158. Understanding power MOSFET data sheet parameters. Document information

AN11158. Understanding power MOSFET data sheet parameters. Document information Rev. 4 4 February 2014 Application note Document information Info Keywords Abstract Content MOSFET. This application note describes the content of power MOSFET data sheet parameters Revision history Rev

More information

High Power Infrared Emitting Diode, 940 nm, GaAlAs/GaAs

High Power Infrared Emitting Diode, 940 nm, GaAlAs/GaAs TSAL64 High Power Infrared Emitting Diode, 94 nm, GaAlAs/GaAs DESCRIPTION 94 8389 TSAL64 is an infrared, 94 nm emitting diode in GaAlAs/GaAs technology with high radiant power molded in a blue-gray plastic

More information

DISCRETE SEMICONDUCTORS DATA SHEET. BLF244 VHF power MOS transistor

DISCRETE SEMICONDUCTORS DATA SHEET. BLF244 VHF power MOS transistor DISCRETE SEMICONDUCTORS DATA SHEET September 1992 FEATURES High power gain Low noise figure Easy power control Good thermal stability Withstands full load mismatch Gold metallization ensures excellent

More information

Optocoupler, Phototransistor Output, with Base Connection

Optocoupler, Phototransistor Output, with Base Connection CNY7 Optocoupler, Phototransistor FEATURES Isolation test voltage 5 V RMS A 6 B Long term stability i79 C NC 5 C E Industry standard dual-in-line package Lead (Pb-free component Component in accordance

More information

Symbol Parameter Ratings Units V DSS Drain-to-Source Voltage 80 V V GS Gate-to-Source Voltage ±20 V Drain Current - Continuous (V

Symbol Parameter Ratings Units V DSS Drain-to-Source Voltage 80 V V GS Gate-to-Source Voltage ±20 V Drain Current - Continuous (V FDBL8636_F85 N-Channel PowerTrench MOSFET 8 V, 3 A,.4 mω Features Typical R DS(on) =. mω at V GS = V, I D = 8 A Typical Q g(tot) = 72 nc at V GS = V, I D = 8 A UIS Capability RoHS Compliant Qualified to

More information

Pulse Proof Thick Film Chip Resistors

Pulse Proof Thick Film Chip Resistors Pulse Proof Thick Film Chip Resistors FEATURES High pulse performance, up to kw Stability R/R 1 % for h at 70 C AEC-Q200 qualified Material categorization: for definitions of compliance please see www.vishay.com/doc?99912

More information

Features Benefits Description TO-247AC (Modified) Absolute Maximum Ratings Parameter Max Units

Features Benefits Description TO-247AC (Modified) Absolute Maximum Ratings Parameter Max Units Bulletin PD -.338 rev. B /4 HEXFRED TM HFA5PB6 Ultrafast, Soft Recovery Diode Features Ultrafast Recovery Ultrasoft Recovery Very Low I RRM Very Low Q rr Specified at Operating Conditions Benefits Reduced

More information

STPS40L15CW. 2 x 20 Amps SCHOTTKY RECTIFIER. Case Styles. I F(AV) = 40Amp V R = 15V. Bulletin PD-20622 rev. B 10/06. Description/ Features

STPS40L15CW. 2 x 20 Amps SCHOTTKY RECTIFIER. Case Styles. I F(AV) = 40Amp V R = 15V. Bulletin PD-20622 rev. B 10/06. Description/ Features Bulletin PD-20622 rev. B 0/06 STPS40L5CW SCHOTTKY RECTIFIER 2 x 20 Amps I F(AV) = 40Amp V R = 5V Major Ratings and Characteristics Characteristics Values Units I F(AV) Rectangular 40 A waveform V RRM 5

More information

Thick Film Resistor Networks, Military, MIL-PRF-83401 Qualified, Type RZ010 and RZ020 Dual-In-Line, Molded DIP

Thick Film Resistor Networks, Military, MIL-PRF-83401 Qualified, Type RZ010 and RZ020 Dual-In-Line, Molded DIP MDM (Military M831/1 and /2) Thick Film Resistor Networks, Military, MIL-PRF-831 Qualified, Type RZ1 and RZ2 Dual-In-Line, Molded DIP STANDARD ELECTRICAL SPECIFICATIONS VISHAY DALE MODEL/ PIN NO. MIL STYLE

More information

2 Port, USB 2.0 High Speed (480 Mbps) Switch, DPDT Analog Switch

2 Port, USB 2.0 High Speed (480 Mbps) Switch, DPDT Analog Switch 2 Port, UB 2. High peed (48 Mbps) witch, DPDT Analog witch DG2722 DECRIPTION The DG2722 is 2 port high speed analog switch optimized for UB 2. signal switching. The DG2722 switch is configured in DPDT.

More information

N - CHANNEL100V - 00.50Ω - 30A - TO-220/TO-220FI POWER MOSFET 30 A 16 A

N - CHANNEL100V - 00.50Ω - 30A - TO-220/TO-220FI POWER MOSFET 30 A 16 A IRF540 IRF540FI N - CHNNEL100V - 00.50Ω - 30 - TO-220/TO-220FI POWER MOSFET IRF540 IRF540FI TYPE V DSS R DS(on) I D 100 V 100 V

More information

ULN2801A, ULN2802A, ULN2803A, ULN2804A

ULN2801A, ULN2802A, ULN2803A, ULN2804A ULN2801A, ULN2802A, ULN2803A, ULN2804A Eight Darlington array Datasheet production data Features Eight Darlington transistors with common emitters Output current to 500 ma Output voltage to 50 V Integral

More information

Insulated Precision Wirewound Resistors Axial Leads

Insulated Precision Wirewound Resistors Axial Leads Insulated Precision Wirewound Resistors Axial Leads In wirewound precision resistors, the series holds a leading position in professional applications whenever an excellent stability of the ohmic value

More information

AUTOMOTIVE GRADE. Base part number Package Type Standard Pack Orderable Part Number

AUTOMOTIVE GRADE. Base part number Package Type Standard Pack Orderable Part Number UTOMOTVE GRDE URG4P40S-E nsulated Gate Bipolar Transistor Features V ES = 600V Standard: Optimized for minimum saturation voltage and low operating frequencies ( < khz) Generation 4 GBT design provides

More information

AN2703 Application note

AN2703 Application note Application note list for SCRs, TRIACs, AC switches, and DIACS Introduction All datasheet parameters are rated as minimum or maximum values, corresponding to the product parameter distribution. In each

More information

AAT4280 Slew Rate Controlled Load Switch

AAT4280 Slew Rate Controlled Load Switch General Description Features SmartSwitch The AAT4280 SmartSwitch is a P-channel MOSFET power switch designed for high-side load switching applications. The P-channel MOSFET device has a typical R DS(ON)

More information

DISCRETE SEMICONDUCTORS DATA SHEET M3D060. BLF177 HF/VHF power MOS transistor. Product specification Supersedes data of 1998 Jul 02.

DISCRETE SEMICONDUCTORS DATA SHEET M3D060. BLF177 HF/VHF power MOS transistor. Product specification Supersedes data of 1998 Jul 02. DISCRETE SEMICONDUCTORS DATA SHEET M3D6 Supersedes data of 1998 Jul 2 23 Jul 21 FEATURES High power gain Low intermodulation distortion Easy power control Good thermal stability Withstands full load mismatch.

More information

High-speed switching diodes. Type number Package Configuration Package NXP JEITA JEDEC

High-speed switching diodes. Type number Package Configuration Package NXP JEITA JEDEC Rev. 8 18 November 2010 Product data sheet 1. Product profile 1.1 General description, encapsulated in small Surface-Mounted Device (SMD) plastic packages. Table 1. Product overview Type number Package

More information

Surface Mount Schottky Barrier

Surface Mount Schottky Barrier FEATURES - Very low profile - typical height of 0.68mm - Low power loss, high efficiency - Ideal for automated placement - Moisture sensitivity level: level, per J-STD-020 - Compliant to RoHS Directive

More information

BAS16 series. 1. Product profile. High-speed switching diodes. 1.1 General description. 1.2 Features and benefits. 1.

BAS16 series. 1. Product profile. High-speed switching diodes. 1.1 General description. 1.2 Features and benefits. 1. Rev. 6 4 September 04 Product data sheet. Product profile. General description, encapsulated in small Surface-Mounted Device (SMD) plastic packages. Table. Product overview Type number Package Configuration

More information

AN11243. Failure signature of electrical overstress on power MOSFETs. Document information

AN11243. Failure signature of electrical overstress on power MOSFETs. Document information Rev. 01 29 October 2012 Application note Document information Info Keywords Abstract Content Power MOSFETs, Electrical Overstress (EOS), Unclamped Inductive Switching (UIS) When Power MOSFETs fail, there

More information

PHOTOTRANSISTOR OPTOCOUPLERS

PHOTOTRANSISTOR OPTOCOUPLERS MCT2 MCT2E MCT20 MCT27 WHITE PACKAGE (-M SUFFIX) BLACK PACKAGE (NO -M SUFFIX) DESCRIPTION The MCT2XXX series optoisolators consist of a gallium arsenide infrared emitting diode driving a silicon phototransistor

More information

2N3906. General Purpose Transistors. PNP Silicon. Pb Free Packages are Available* http://onsemi.com. Features MAXIMUM RATINGS

2N3906. General Purpose Transistors. PNP Silicon. Pb Free Packages are Available* http://onsemi.com. Features MAXIMUM RATINGS 2N396 General Purpose Transistors PNP Silicon Features PbFree Packages are Available* COLLECTOR 3 MAXIMUM RATINGS Rating Symbol Value Unit Collector Emitter Voltage V CEO 4 Vdc Collector Base Voltage V

More information

2N3903, 2N3904. General Purpose Transistors. NPN Silicon. Pb Free Packages are Available* Features. http://onsemi.com MAXIMUM RATINGS

2N3903, 2N3904. General Purpose Transistors. NPN Silicon. Pb Free Packages are Available* Features. http://onsemi.com MAXIMUM RATINGS N393, General Purpose Transistors NPN Silicon Features PbFree Packages are Available* MAXIMUM RATINGS Rating Symbol Value Unit CollectorEmitter Voltage V CEO 4 Vdc CollectorBase Voltage V CBO 6 Vdc EmitterBase

More information

IRF5210. HEXFET Power MOSFET V DSS = -100V. R DS(on) = 0.06Ω I D = -40A

IRF5210. HEXFET Power MOSFET V DSS = -100V. R DS(on) = 0.06Ω I D = -40A dvanced Process Technoogy Utra Low OnResistance ynamic dv/dt Rating 75 C Operating Temperature Fast Switching PChanne Fuy vaanche Rated escription Fifth Generation HEXFETs from Internationa Rectifier utiize

More information

FQP8N80C/FQPF8N80C/FQPF8N80CYDTU 800V N-Channel MOSFET

FQP8N80C/FQPF8N80C/FQPF8N80CYDTU 800V N-Channel MOSFET FQP8N80C/FQPF8N80C/FQPF8N80CYTU 800V N-Channel MOFET General escription These N-Channel enhancement mode power field effect transistors are produced using Fairchild s proprietary, planar stripe, MO technology.

More information

NUP4106. Low Capacitance Surface Mount TVS for High-Speed Data Interfaces SO 8 LOW CAPACITANCE VOLTAGE SUPPRESSOR 500 WATTS PEAK POWER 3.

NUP4106. Low Capacitance Surface Mount TVS for High-Speed Data Interfaces SO 8 LOW CAPACITANCE VOLTAGE SUPPRESSOR 500 WATTS PEAK POWER 3. Low Capacitance Surface Mount TVS for High-Speed Data Interfaces The NUP0 transient voltage suppressor is designed to protect equipment attached to high speed communication lines from ESD and lightning.

More information

Projet 5 - K3501 / Onduleur 12V DC - 220V AC.

Projet 5 - K3501 / Onduleur 12V DC - 220V AC. Thierry LEQUEU Septembre 26 [DATA76] Fichier : PROJETS-IUT1.DOC Projet 5 - K351 / Onduleur 12V DC - 22V AC. Projet : PROJETS-IUT1 Info : kit Velleman, [DATA12]. Révision : 24 janvier 2 5.1 Liste des documents

More information

LM134-LM234-LM334. Three terminal adjustable current sources. Features. Description

LM134-LM234-LM334. Three terminal adjustable current sources. Features. Description Three terminal adjustable current sources Features Operates from 1V to 40V 0.02%/V current regulation Programmable from 1µA to 10mA ±3% initial accuracy Description The LM134/LM234/LM334 are 3-terminal

More information

LC03-6R2G. Low Capacitance Surface Mount TVS for High-Speed Data Interfaces. SO-8 LOW CAPACITANCE VOLTAGE SUPPRESSOR 2 kw PEAK POWER 6 VOLTS

LC03-6R2G. Low Capacitance Surface Mount TVS for High-Speed Data Interfaces. SO-8 LOW CAPACITANCE VOLTAGE SUPPRESSOR 2 kw PEAK POWER 6 VOLTS Low Capacitance Surface Mount TVS for High-Speed Data terfaces The LC3- transient voltage suppressor is designed to protect equipment attached to high speed communication lines from ESD, EFT, and lighting.

More information

High-Speed, Low-Glitch D/CMOS Analog Switches

High-Speed, Low-Glitch D/CMOS Analog Switches G6, G62, G63 High-Speed, Low-Glitch /CMOS Analog Switches ESCRIPTION The G6, G62, G63 feature high-speed lowcapacitance lateral MOS switches. Charge injection has been minimized to optimize performance

More information

Preliminary Datasheet

Preliminary Datasheet Features Macroblock Preliminary Datasheet 1.2A Constant Output Current 93% Efficiency @ input voltage 13V, 350mA, 9~36V Input Voltage Range Hysteretic PFM Improves Efficiency at Light Loads Settable Output

More information

Reflective Optical Sensor with Transistor Output

Reflective Optical Sensor with Transistor Output Reflective Optical Sensor with Transistor Output CNY7 Description The CNY7 is a reflective sensor that includes an infrared emitter and phototransistor in a leaded package which blocks visible light. E

More information

(250 Volts Peak) SEMICONDUCTOR TECHNICAL DATA

(250 Volts Peak) SEMICONDUCTOR TECHNICAL DATA SEMICONDUCTOR TECHNICAL DATA Order this document by MOC00/D (0 Volts Peak) The MOC00 Series consists of gallium arsenide infrared emitting diodes, optically coupled to silicon bilateral switch and are

More information

ESD7484. 4-Line Ultra-Large Bandwidth ESD Protection

ESD7484. 4-Line Ultra-Large Bandwidth ESD Protection 4-Line Ultra-Large Bandwidth ESD Protection Functional Description The ESD7484 chip is a monolithic, application specific discrete device dedicated to ESD protection of the HDMI connection. It also offers

More information

FDD5N50F N-Channel MOSFET, FRFET 500V, 3.5A, 1.55Ω Features

FDD5N50F N-Channel MOSFET, FRFET 500V, 3.5A, 1.55Ω Features F5N50F N-Channel MOFET, FRFET 500V, 3.5A,.55Ω Features R (on) =.25Ω ( Typ.)@ V G = 0V, I =.75A Low gate charge ( Typ. nc) Low C rss ( Typ. 5pF) Fast switching 00% avalanche tested Improved dv/dt capability

More information

DDSL01. Secondary protection for DSL lines. Features. Description

DDSL01. Secondary protection for DSL lines. Features. Description Secondary protection for DSL lines Features Stand off voltage: 30 V Surge capability: I pp = 30 A 8/20 µs Low capacitance device: 4.5 pf at 2 V RoHS package Low leakage current: 0.5 µa at 25 C 3 2 Description

More information

Description. Table 1. Device summary. Order codes. TO-220 (single gauge) TO-220 (double gauge) D²PAK (tape and reel) TO-220FP

Description. Table 1. Device summary. Order codes. TO-220 (single gauge) TO-220 (double gauge) D²PAK (tape and reel) TO-220FP 1.2 V to 37 V adjustable voltage regulators Description Datasheet - production data TO-220 TO-220FP The LM217, LM317 are monolithic integrated circuits in TO-220, TO-220FP and D²PAK packages intended for

More information

19TQ015PbF. 19 Amp SCHOTTKY RECTIFIER. Case Styles. I F(AV) = 19Amp V R = 15V. Bulletin PD-20840 rev. B 04/06. Major Ratings and Characteristics

19TQ015PbF. 19 Amp SCHOTTKY RECTIFIER. Case Styles. I F(AV) = 19Amp V R = 15V. Bulletin PD-20840 rev. B 04/06. Major Ratings and Characteristics Bulletin PD-0840 rev. B 04/06 9TQ05PbF SCHOTTKY ECTIFIE 9 Amp I F(A) = 9Amp = 5 Major atings and Characteristics Characteristics alues Units I F(A) ectangular 9 A waveform M 5 I FSM @ tp = 5 μs sine 700

More information

IR2117(S)/IR2118(S) & (PbF)

IR2117(S)/IR2118(S) & (PbF) Data Sheet No. PD14 Rev N IR2117(S)/IR211(S) & (PbF) Features Floating channel designed for bootstrap operation Fully operational to +V Tolerant to negative transient voltage dv/dt immune Gate drive supply

More information

VN03. ISO high side smart power solid state relay PENTAWATT. Features. Description. www.tvsat.com.pl

VN03. ISO high side smart power solid state relay PENTAWATT. Features. Description. www.tvsat.com.pl ISO high side smart power solid state relay Features Type V DSS R DS(on) I n (1) Maximum continuous output current (a) : 4A @ Tc= 25 C 5V logic level compatible input Thermal shutdown Under voltage protection

More information

IR2109(4) (S) HALF-BRIDGE DRIVER. Features. Product Summary. Packages. Description. Typical Connection

IR2109(4) (S) HALF-BRIDGE DRIVER. Features. Product Summary. Packages. Description. Typical Connection Data Sheet No. PD66-T Features Floating channel designed for bootstrap operation Fully operational to +6V Tolerant to negative transient voltage dv/dt immune Gate drive supply range from to V Undervoltage

More information

Metal Film Resistors, Military, MIL-R-10509 Qualified, Precision, Type RN and MIL-PRF-22684 Qualified, Type RL

Metal Film Resistors, Military, MIL-R-10509 Qualified, Precision, Type RN and MIL-PRF-22684 Qualified, Type RL Metal Film Resistors, Military, Qualified, Precision, Type RN and Qualified, Type RL FEATURES Very low noise (- 40 db) Very low voltage coefficient (5 ppm/v) Controlled temperature coefficient Flame retardant

More information

J. S c h o i s wo h l

J. S c h o i s wo h l Linear Mode Operation and Safe Operating Diagram of Power-MOSFETs J. S c h o i s wo h l Application Note V0.92 June 2010 IFNA IMM SMD PMD Published by Infineon Technologies AG 81726 Munich, Germany 2011

More information

TIC225 SERIES SILICON TRIACS

TIC225 SERIES SILICON TRIACS Copyright 200, Power Innovations Limited, UK JULY 975 - REVISED MARCH 200 Sensitive Gate Triacs 8 A RMS, 70 A Peak Glass Passivated Wafer 400 V to 800 V Off-State Voltage Max I GT of 5 ma (Quadrant ) MT

More information

Blocking Maximum rated values 1) Parameter Symbol Conditions Value Unit. f = 50 Hz, t p = 10 ms, T vj = 0 160 C f = 5 Hz, t p = 10 ms,

Blocking Maximum rated values 1) Parameter Symbol Conditions Value Unit. f = 50 Hz, t p = 10 ms, T vj = 0 160 C f = 5 Hz, t p = 10 ms, V RSM = 2800 V Rectifier Diode I F(AV)M = 6830 A I F(RMS) = 10730 A I FSM = 87 10 3 A V F0 = 0.8 V r F = 0.05 mw 5SDD 60N2800 Patented free-floating silicon technology Very low on-state losses Optimum

More information

Y.LIN ELECTRONICS CO.,LTD.

Y.LIN ELECTRONICS CO.,LTD. Features Current transfer ratio (CTR 50~600% at I F =5mA, V CE =5V) High isolation voltage between input and output (Viso=5000 V rms ) Creepage distance >7.62 mm Operating temperature up to +110 C Compact

More information

.OPERATING SUPPLY VOLTAGE UP TO 46 V

.OPERATING SUPPLY VOLTAGE UP TO 46 V L298 DUAL FULL-BRIDGE DRIVER.OPERATING SUPPLY VOLTAGE UP TO 46 V TOTAL DC CURRENT UP TO 4 A. LOW SATURATION VOLTAGE OVERTEMPERATURE PROTECTION LOGICAL "0" INPUT VOLTAGE UP TO 1.5 V (HIGH NOISE IMMUNITY)

More information

L78MxxAB L78MxxAC. Precision 500 ma regulators. Features. Description

L78MxxAB L78MxxAC. Precision 500 ma regulators. Features. Description L78MxxAB L78MxxAC Precision 500 ma regulators Features Output current to 0.5 A Output voltages of 5; 6; 8; 9; 10; 12; 15; 18; 24 V Thermal overload protection Short circuit protection Output transition

More information

400KHz 60V 4A Switching Current Boost / Buck-Boost / Inverting DC/DC Converter

400KHz 60V 4A Switching Current Boost / Buck-Boost / Inverting DC/DC Converter Features Wide 5V to 32V Input Voltage Range Positive or Negative Output Voltage Programming with a Single Feedback Pin Current Mode Control Provides Excellent Transient Response 1.25V reference adjustable

More information

BTB04-600SL STANDARD 4A TRIAC MAIN FEATURES

BTB04-600SL STANDARD 4A TRIAC MAIN FEATURES BTB-6SL STANDARD A TRIAC MAIN FEATURES A Symbol Value Unit I T(RMS) A V DRM /V RRM 6 V I GT(Q) ma G A A DESCRIPTION The BTB-6SL quadrants TRIAC is intended for general purpose applications where high surge

More information

STTH3R02QRL. Ultrafast recovery diode. Main product characteristics. Features and benefits. Description. Order codes DO-15 STTH3R02Q DO-201AD STTH3R02

STTH3R02QRL. Ultrafast recovery diode. Main product characteristics. Features and benefits. Description. Order codes DO-15 STTH3R02Q DO-201AD STTH3R02 Ultrafast recovery diode Main product characteristics I F(V) 3 V RRM 2 V T j (max) V F (typ) 175 C.7 V K t rr (typ) 16 ns Features and benefits Very low conduction losses Negligible switching losses K

More information

TOSHIBA Bipolar Linear Integrated Circuit Silicon Monolithic TAR5SB15~TAR5SB50

TOSHIBA Bipolar Linear Integrated Circuit Silicon Monolithic TAR5SB15~TAR5SB50 TOSHIBA Bipolar Linear Integrated Circuit Silicon Monolithic TARSB~TARSB Point Regulators (Low-Dropout Regulator) TARSB~TARSB The TARSBxx Series is comprised of general-purpose bipolar single-power-supply

More information

(250 Volts Peak) SEMICONDUCTOR TECHNICAL DATA

(250 Volts Peak) SEMICONDUCTOR TECHNICAL DATA SEMICONDUCTOR TECHNICAL DATA Order this document by MOC0/D (20 Volts Peak) The MOC0, MOC02 and MOC0 devices consist of gallium arsenide infrared emitting diodes optically coupled to a monolithic silicon

More information

LM1084 5A Low Dropout Positive Regulators

LM1084 5A Low Dropout Positive Regulators 5A Low Dropout Positive Regulators General Description The LM1084 is a series of low dropout voltage positive regulators with a maximum dropout of 1.5 at 5A of load current. It has the same pin-out as

More information

Optocoupler, Phototransistor Output, With Base Connection

Optocoupler, Phototransistor Output, With Base Connection IL/ IL2/ IL5 Optocoupler, Phototransistor Output, With Base Connection Features Current Transfer Ratio (see order information) Isolation Test Voltage 5300 V RMS Lead-free component Component in accordance

More information

AAT3238 DATA SHEET. 300mA MicroPower TM High Performance LDO Linear Regulator. Applications. Features. General Description. Typical Application

AAT3238 DATA SHEET. 300mA MicroPower TM High Performance LDO Linear Regulator. Applications. Features. General Description. Typical Application General Description The MicroPower low dropout (LDO) linear regulator is ideally suited for portable applications where very fast transient response, extended battery life, and small size are critical.

More information

TOSHIBA Transistor Silicon PNP Epitaxial Type (PCT Process) 2SA1020

TOSHIBA Transistor Silicon PNP Epitaxial Type (PCT Process) 2SA1020 2SA12 TOSHIBA Transistor Silicon PNP Epitaxial Type (PCT Process) 2SA12 Power Amplifier Applications Power Switching Applications Unit: mm Low Collector saturation voltage: V CE (sat) =.5 V (max) (I C

More information

SD4840/4841/4842/4843/4844

SD4840/4841/4842/4843/4844 CURRENT MODE PWM CONTROLLER WITH BUILT-IN HIGH VOLTAGE MOSFET DESCRIPTION SD4840/4841/4842/4843/4844 is a current mode PWM controller with low standby power and low start current for power switch. In standby

More information

AN-6005 Synchronous buck MOSFET loss calculations with Excel model

AN-6005 Synchronous buck MOSFET loss calculations with Excel model www.fairchildsemi.com Synchronous buck MOSFET loss calculations with Excel model Jon Klein Power Management Applications Abstract The synchronous buck circuit is in widespread use to provide point of use

More information

MM74HC14 Hex Inverting Schmitt Trigger

MM74HC14 Hex Inverting Schmitt Trigger MM74HC14 Hex Inverting Schmitt Trigger General Description The MM74HC14 utilizes advanced silicon-gate CMOS technology to achieve the low power dissipation and high noise immunity of standard CMOS, as

More information

VNI2140JTR. Dual high side smart power solid state relay. Features. Description

VNI2140JTR. Dual high side smart power solid state relay. Features. Description Dual high side smart power solid state relay Features Type (1) V demag (1) R DSon (1) I out V CC -45 V 0.08 Ω 1 A (2) V CC 45 V 1. Per channel 2. Current limitation Nominal current: 0.5 A per channel Shorted

More information