IRS2106/IRS21064(S)PbF

Transcription

1 Data Sheet No. PD6246 Features Floating channel designed for bootstrap operation Fully operational to +6 V Tolerant to negative transient voltage, dv/dt immune Gate drive supply range from 1 V to 2 V Undervoltage lockout for both channels 3.3 V, 5 V, and 15 V input logic compatible Matched propagation delay for both channels Logic and power ground +/- 5 V offset Lower di/dt gate driver for better noise immunity Outputs in phase with inputs (IRS216) RoHS compliant Description The IRS216/IRS2164 are high voltage, high speed power MOSFET and IGBT drivers with independent high- and low-side referenced output channels. Proprietary HVIC and latch immune CMOS technologies enable ruggedized monolithic construction. The logic input is compatible with standard CMOS or LSTTL output, down to 3.3 V logic. Feature Comparison Part IRS216/IRS2164(S)PbF HIGH AND W SIDE DRIVER Input logic Packages Crossconduction prevention logic 8-Lead PDIP 8-Lead SOIC Deadtime (ns) 14-Lead PDIP Ground Pins 14-Lead PDIP 14-Lead SOIC The output drivers feature a high pulse current buffer stage designed for minimum driver cross-conduction. The floating channel can be used to drive an N-channel power MOSFET or IGBT in the high side configuration which operates up to 6 V. ton/toff (ns) 216/231 COM / no none 2164 VSS/COM 22/2 218 Internal 54 COM / yes 2184 Programmable 54-5 VSS/COM 22/2 219/232 Internal 54 COM IN/SD yes 2194 Programmable 54-5 VSS/COM 75/2 234 / yes Internal COM 16/14 Typical Connection up to 6 V V B V S TO AD COM IRS216 up to 6 V (Refer to Lead Assignments for correct pin configuration). These diagrams show electrical connections only. Please refer to our Application Notes and DesignTips for proper circuit board layout. V SS V SS V B V S COM IRS2164 TO AD 1

2 IRS216/IRS2164(S)PbF Absolute Maximum Ratings Absolute maximum ratings indicate sustained limits beyond which damage to the device may occur. All voltage parameters are absolute voltages referenced to COM. The thermal resistance and power dissipation ratings are measured under board mounted and still air conditions. Symbol Definition Min. Units V B High-side floating absolute voltage V S High-side floating supply offset voltage V B - 25 V B +.3 V High-side floating output voltage V S -.3 V B +.3 Low-side and logic fixed supply voltage V Low-side output voltage V IN Logic input voltage V SS V SS Logic ground (IRS2164 only) dv S /dt Allowable offset supply voltage transient 5 V/ns P D Package power T A +25 C Rth JA Thermal resistance, junction to ambient (8 lead PDIP) 1. (8 lead SOIC).625 (14 lead PDIP) 1.6 (14 lead SOIC) 1. (8 lead PDIP) 125 (8 lead SOIC) 2 (14 lead PDIP) 75 (14 lead SOIC) 12 T J Junction temperature 15 T S Storage temperature T L Lead temperature (soldering, 1 seconds) 3 V W C/W C 2

3 IRS216/IRS2164(S)PbF Recommended Operating Conditions The input/output logic timing diagram is shown in Fig. 1. For proper operation the device should be used within the recommended conditions. The V S and V SS offset rating are tested with all supplies biased at a 15 V differential. Symbol Definition Min. Units VB High-side floating supply absolute voltage V S + 1 V S + 2 V S High-side floating supply offset voltage Note 1 6 V High-side floating output voltage V S V B Low-side and logic fixed supply voltage 1 2 V Low-side output voltage V V IN Logic input voltage V SS V SS Logic ground (IRS2164 only) -5 5 T A Ambient temperature C Note 1: Logic operational for V S of -5 V to +6 V. Logic state held for V S of -5 V to -V BS. (Please refer to the Design Tip DT97-3 for more details). Dynamic Electrical Characteristics V BIAS (, V BS ) = 15 V, V SS = COM, C L = pf, T A = 25 C. Symbol Definition Min. Units Test Conditions ton Turn-on propagation delay 22 3 V S = V toff Turn-off propagation delay 2 28 V S = V or 6 V MT Delay matching, HS & LS turn-on/off 3 tr Turn-on rise time 22 tf Turn-off fall time 35 8 ns V S = V 3

4 IRS216/IRS2164(S)PbF Static Electrical Characteristics V BIAS (, V BS ) = 15 V, V SS = COM and T A = 25 C unless otherwise specified. The V IL, V IH, and I IN parameters are referenced to V SS /COM and are applicable to the respective input leads. The V O, I O, and Ron parameters are referenced to COM and are applicable to the respective output leads: and. Symbol Definition Min. Units Test Conditions V IH Logic 1 input voltage 2.5 V IL Logic input voltage.8 V OH High level output voltage, V BIAS - V O.5.2 V OL Low level output voltage, V O.2.1 I LK Offset supply leakage current 5 V B = V S = 6 V I QBS Quiescent V BS supply current I QCC Quiescent supply current I IN+ Logic 1 input bias current V IN = 5 V 5 2 I IN- Logic input bias current V IN = V 5 UV+ V BSUV+ threshold UV- V BSUV- threshold and V BS supply undervoltage positive going and V BS supply undervoltage negative going UVH Hysteresis.3.7 V µa V = 1 V to 2 V I O = 2 ma V IN = V or 5 V V BSUVH I O+ Output high short circuit pulsed current I O- Output low short circuit pulsed current 27 6 ma V O = V, PW 1 µs V O = 15 V, PW 1 µs 4

5 IRS216/IRS2164(S)PbF 5 Functional Block Diagrams IRS216 UV DETECT DELAY COM VCC VS VB PULSE FILTER HV LEVEL SHIFTER R R S Q UV DETECT PULSE GENERATOR VSS/COM LEVEL SHIFT VSS/COM LEVEL SHIFT IRS2164 UV DETECT DELAY COM VCC VSS VS VB PULSE FILTER HV LEVEL SHIFTER R R S Q UV DETECT PULSE GENERATOR VSS/COM LEVEL SHIFT VSS/COM LEVEL SHIFT

6 IRS216/IRS2164(S)PbF Lead Definitions Symbol Description VSS V B V S COM Logic input for high-side gate driver output (), in phase Logic input for low-side gate driver output (), in phase Logic ground (IRS2164 only) High-side floating supply High-side gate drive output High-side floating supply return Low-side and logic fixed supply Low-side gate drive output Low-side return Lead Assignments 1 V B 8 1 V B V S 6 3 V S 6 4 COM 5 4 COM 5 8 Lead PDIP 8 Lead SOIC IRS216PbF IRS216SPbF V B 13 2 V B V S 11 4 V S 11 5 VSS 1 5 VSS 1 6 COM 9 6 COM Lead PDIP 14 Lead SOIC IRS2164PbF IRS2164SPbF 6

7 IRS216/IRS2164(S)PbF Figure 1. Input/Output Timing Diagram 5% 5% ton t r toff tf 9% 9% 1% 1% Figure 2. Switching Time Waveform Definitions 5% 5% 1% MT MT 9% Figure 3. Delay Matching Waveform Definitions 7

8 IRS216/IRS2164(S)PbF 5 5 Turn-On Propagation Delay (ns) 4 3 Max Turn-On Propagation Delay (ns) V BIAS Supply Voltage (V) Figure 4A. Turn-On Propagation Delay Figure 4B. Turn-On Propagation Delay 5 5 Turn-Off Propagation Delay (ns) Turn-Off Propagation Delay (ns) V BIAS Supply Voltage (V) Figure 5A. Turn-Off Propagation Delay Figure 5B. Turn-Off Propagation Delay 8

9 IRS216/IRS2164(S)PbF 5 5 Turn-On Rise Time (ns) Figure 6A. Turn-On Rise Time Turn-On Rise Time (ns) V BIAS Supply Voltage (V) Figure 6B. Turn-On Rise Time 2 2 Turn-Off Rise Time (ns) 15 5 Turn-Off Rise Time (ns) Temperature ( o C) Input Voltage (V) Figure 7A. Turn-Off Fall Time Figure 7B. Turn-Off Fall Time 9

10 IRS216/IRS2164(S)PbF Ipnput Voltage (V) Min Figure 8A. Logic 1 Input Voltage Input Vo lta ge (V) Min V BIAS Supply Voltage (V) Figure 8B. Logic 1 Input Voltage I n p u t V o l t a g e ( V ) Min. Input Voltage (V) Min Figure 9A. Logic "" Input Voltage Figure 9A. Logic Input Voltage Supply Voltage (V) Figure 9B. Logic Input Voltage 1

11 IRS216/IRS2164(S)PbF.5.5 High Level Output Voltage (V) (V) Figure 1A. High Level Output Voltage High Level Output Voltage (V) (V) V BIAS Supply Voltage (V) Figure 1B. High Level Output Voltage Low Level Output Voltage (V) (V) Figure 11A. Low Level Output Voltage Low Level Output Voltage (V) (V) V BIAS Supply Voltage (V) Figure 11B. Low Level Output Voltage 11

12 IRS216/IRS2164(S)PbF Offset Supply Leakage Current (µa) Offset Supply Leakage Current (µa) V B Boost Voltage (V) Figure 12A. Offset Supply Leakage Current Figure 12B. Offset Supply Leakage Current 4 4 V BS Supply Current (µa) 3 2 V BS Supply Current (µa) 3 2 Min Figure 13A. VBS Supply Current Min V BS Supply Voltage (V) Figure 13B. VBS Supply Current 12

13 IRS216/IRS2164(S)PbF 4 4 (µa) Vcc Supply Current 3 2 M ax. Min. Supply Current (µa) 3 2 Min Figure 14A. Quiescent VCC Supply Current Supply Voltage (V) Figure 14B. Quiescent VCC Supply Current vs. VCC Supply Voltage 6 6 Logic "1" Input Current (µa) Logic "1" Input Current ( µa) Supply Voltage (V) Figure 15A. Logic 1 Input Current Figure 15B. Logic 1 Bias Current 13

14 IRS216/IRS2164(S)PbF Logic "" Input Bias Current (µa) 6 5 Max Temperature ( C) Figure 16A. Logic "" Input Bias Current Logic "" Input Bias Current (µa) 6 5 Max Supply Voltage (V) Figure 16B. Logic "" Input Bias Current vs. Voltage UV Threshold (+) (V) Min. UV Threshold (-) (V) Min Figure 17. VCC Undervoltage Threshold (+) Figure 18. VCC Undervoltage Threshold (-) 14

15 IRS216/IRS2164(S)PbF V BS UV Threshold (+) (V) Min. V BS UV Threshold (-) (V) Min Figure 19. VBS Undervoltage Threshold (+) Figure 2. VBS Undervoltage Threshold (-) Output Source Current (ma) Figure 21A. Output Source Current Output Source Current (ma) V BIAS Supply Voltage (V) Figure 21B. Output Source Current 15

16 IRS216/IRS2164(S)PbF Output Sink Current (ma) Output Sink Current (ma) V BIAS Supply Voltage (V) Figure 22A. Output Sink Current Figure 22B. Output Sink Currentt 14 V S Offset Supply Voltage (V) V BS Floating Supply Voltage (V) Temprature ( o C) V 7 V V 1 1 Figure 23. Maximum VS Negative Offset Figure 24. IRS216 vs. Frequency (IRFBC2), Rgate=33 Ω, VCC 16

17 IRS216/IRS2164(S)PbF V 7 V V V 7 V V Figure 25. IRS216 vs. Frequency (IRFBC3), =22 Ω, Figure 26. IRS216 vs. Frequency (IRFBC4), =15 Ω, V 7 V V V 7 V V Figure 27. IRS216 vs. Frequency (IRFPE5), =1 Ω, Figure 28. IRS2164 vs. Frequency (IRFBC2), =33 Ω, 17

18 IRS216/IRS2164(S)PbF V 7 V V 7 V V 4 V Figure 29. IRS2164 vs. Frequency (IRFBC3), =22 Ω, Figure 3. IRS2164 vs. Frequency (IRFBC4), =15 Ω, V V V V 7 V V Figure 31. IRS2164 vs. Frequency (IRFPE5), =1 Ω, Figure 32. IRS216S vs. Frequency (IRFBC2), =33 Ω, 18

19 IRS216/IRS2164(S)PbF V 7 V V 7 V V V Figure 33. IRS216S vs. Frequency (IRFBC3), =22 Ω, Figure 34. IRS216S vs. Frequency (IRFBC4), =15 Ω, V 7 V V Tempreture ( o C) V 7 V V Figure 35. IRS216S vs. Frequency (IRFPE5), =1 Ω, Figure 36. IRS2164S vs. Frequency (IRFBC2), =33 Ω, 19

20 IRS216/IRS2164(S)PbF V 7 V V 1 1 Figure 37. IRS2164S vs. Frequency (IRFBC3), Rgate=22 Ω, VCC V 7 V V 1 1 Figure 38. IRS2164S vs. Frequency (IRFBC4), =15 Ω, V 7V V Figure 39. IRS2164S vs. Frequency (IRFPE5), =1 Ω, 2

21 IRS216/IRS2164(S)PbF Case Outlines 8 Lead PDIP (MS-1AB) A E 6 6X D e B H.25 [.1] A 6.46 [.255] 3X 1.27 [.5] FOOTPRINT 8X.72 [.28] 8X 1.78 [.7] DIM INC HES MILLIMETERS MIN MAX MIN MAX A A b c D E e.5 BASIC 1.27 BASIC e1.25 BASIC.635 BASIC H K L y e1 A C y K x 45 8X b A1.25 [.1] C A B.1 [.4] 8X L 7 8X c NOTES: 1. DIMENSIONING & TOLERANCING PER ASME Y14.5M CONTROLG DIMENSION: MILLIMETER 3. DIMENSIONS ARE SWN IN MILLIMETERS [INCHES]. 4. OUTE CONFORMS TO JEDEC OUTE MS-12AA. 8 Lead SOIC 5 DIMENSION DOES NOT INCLUDE MOLD PROTRUSIONS. MOLD PROTRUSIONS NOT TO EXCEED.15 [.6]. 6 DIMENSION DOES NOT INCLUDE MOLD PROTRUSIONS. MOLD PROTRUSIONS NOT TO EXCEED.25 [.1]. 7 DIMENSION IS THE LENGTH OF LEAD FOR SOLDERING TO A SUBSTRATE (MS-12AA) 21

22 IRS216/IRS2164(S)PbF 14 Lead PDIP (MS-1AC) 14 Lead SOIC (narrow body) (MS-12AB) 22

23 IRS216/IRS2164(S)PbF Tape & Reel 8-lead SOIC ADED TA PE FEED DIRECTION B A H D F C N OTE : CONTROLG D IMENSION IN MM E G CARRIER TAPE DIMENSION FOR 8SOICN M etr ic Im p erial Code Min Max Min Max A B C D E F G 1.5 n/a.59 n/a H F D E C B A G H REEL DIMENSIONS FOR 8SOICN M etr ic Im p erial Code Min Max Min Max A B C D E F n/a 18.4 n/a.724 G H

24 IRS216/IRS2164(S)PbF Tape & Reel 14-lead SOIC ADED TA PE FEED DIRECTION B A H D F C N OTE : CONTROLG D IMENSION IN MM E G CARRIER TAPE DIMENSION FOR 14SOICN M etr ic Im p erial Code Min Max Min Max A B C D E F G 1.5 n/a.59 n/a H F D E C B A G H REEL DIMENSIONS FOR 14SO IC N M etr ic Im p erial Code Min Max Min Max A B C D E F n/a 22.4 n/a.881 G H

25 IRS216/IRS2164(S)PbF LEADFREE PART MARKING INFORMATION Part number Date code IRSxxxxx YWW? IR logo Pin 1 Identifier? MARKING CODE P Lead Free Released Non-Lead Free Released?XXXX Lot Code (Prod mode - 4 digit SPN code) Assembly site code Per SCOP 2-2 ORDER INFORMATION 8-Lead PDIP IRS216PbF 14-Lead PDIP IRS2164PbF 8-Lead SOIC IRS216SPbF 14-Lead SOIC IRS2164SPbF 8-Lead SOIC Tape & Reel IRS216STRPbF 14-Lead SOIC Tape & Reel IRS2164STRPbF SOIC8 & 14 are MSL2 qualified. This product has been designed and qualified for the industrial level. Qualification standards can be found at IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 9245 Tel: (31) Data and specifications subject to change without notice. 12/4/