ISL2110, ISL2111 8, 2012 FN V, 3A/4A
|
|
|
- Marion Nelson
- 7 years ago
- Views:
Transcription
1 Data Sheet FN V, 3A/A Peak, High Frequency Half-Bridge Drivers The ISL20, ISL2 are 00V, high frequency, half-bridge N-Channel power MOSFET driver ICs. They are based on the popular P200, P20 half-bridge drivers, but offer several performance improvements. Peak output pull-up/ pull-down current has been increased to 3A/A, which significantly reduces switching power losses and eliminates the need for external totem-pole buffers in many applications. Also, the low end of the V DD operational supply range has been extended to 8VDC. The ISL20 has additional input hysteresis for superior operation in noisy environments and the inputs of the ISL2, like those of the ISL20, can now safely swing to the V DD supply rail. Ordering Information PART NUMBER (Notes, 2) PART MARKING TEMP RANGE ( C) PACKAGE (Pb-Free) PKG. DWG. # ISL20ABZ 20 ABZ -0 to Ld SOIC M8.5 ISL20ARZ 2 0ARZ -0 to Ld x DFN L2.xA ISL2ABZ 2 ABZ -0 to Ld SOIC M8.5 ISL2ARZ 2 ARZ -0 to Ld x DFN L2.xA ISL2ARTZ 2 ARTZ -0 to Ld x TDFN L0.x ISL2BRZ 2 BRA -0 to Ld x DFN L8.x NOTES:. Add -T* suffix for tape and reel. Please refer to TB37 for details on reel specifications. 2. These Intersil Pb-free plastic packaged products employ special Pb-free material sets, molding compounds/die attach materials, and 00% matte tin plate plus anneal (e3 termination finish, which is Ro compliant and compatible with both SnPb and Pb-free soldering operations). Intersil Pb-free products are MSL classified at Pb-free peak reflow temperatures that meet or exceed the Pb-free requirements of IPC/JEDEC J STD For Moisture Sensitivity Level (MSL), please see device information page for ISL20, ISL2. For more information on MSL please see techbrief TB33. Features Drives N-Channel MOSFET Half-Bridge SOIC, DFN and TDFN Package Options SOIC, DFN and TDFN Packages Compliant with 00V Conductor Spacing Guidelines per IPC-222 Pb-Free (Ro Compliant) Bootstrap Supply Max Voltage to VDC On-Chip W Bootstrap Diode Fast Propagation Times for Multi-MHz Circuits Drives nf Load with Typical Rise/Fall Times of 9ns/7.5ns CMOS Compatible Input Thresholds (ISL20) 3.3V/TTL Compatible Input Thresholds (ISL2) Independent Inputs Provide Flexibility No Start-Up Problems Outputs Unaffected by Supply Glitches, Ringing Below Ground or Slewing at High dv/dt Low Power Consumption Wide Supply Voltage Range (8V to V) Supply Undervoltage Protection.W/W Typical Output Pull-Up/Pull-Down Resistance Applications Telecom Half-Bridge DC/DC Converters Telecom Full-Bridge DC/DC Converters Two-Switch Forward Converters Active-Clamp Forward Converters Class-D Audio Amplifiers CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures INTERSIL or Copyright Intersil Americas Inc , 20, 202. All Rights Reserved Intersil (and design) is a trademark owned by Intersil Corporation or one of its subsidiaries. All other trademarks mentioned are the property of their respective owners.
2 Pinouts ISL2ARTZ (0 LD x TDFN) ISL20ARZ, ISL2ARZ (2 LD x DFN) VDD 0 VDD VSS 2 VSS EPAD* *EPAD = Exposed PAD ISL20ABZ, ISL2ABZ (8 LD SOIC) ISL2BRZ (8 LD x DFN) VDD VSS V DD 2 3 EPAD* V SS *EPAD = EXPOSED PAD Application Block Diagram +2V +00V V DD SECONDARY CIRCUIT PWM CONTROLLER CONTROL DRIVE DRIVE V SS ISL20 ISL2 REFEREE AND ISOLATION 2 FN295.
3 Functional Block Diagram V DD UNDER VOLTAGE LEVEL SFT DRIVER ISL2 ISL2 UNDER VOLTAGE DRIVER V SS EPAD (DFN Package Only) *EPAD = Exposed Pad. The EPAD is electrically isolated from all other pins. For best thermal performance connect the EPAD to the PCB power ground plane. +8V +2V PWM ISL20 ISL2 SECONDARY CIRCUIT ISOLATION FIGURE. TWO-SWITCH FORWARD CONVERTER +8V +2V SECONDARY CIRCUIT PWM ISL20 ISL2 ISOLATION FIGURE 2. FORWARD CONVERTER WITH AN ACTIVE-CLAMP 3 FN295.
4 Absolute Maximum Ratings Supply Voltage, V DD, V - V (Notes, 5) V to 8V and Voltages (Note 5) V to V DD + 0.3V Voltage on (Note 5) V to V DD + 0.3V Voltage on (Note 5) V - 0.3V to V + 0.3V Voltage on (Continuous) (Note 5) V to 0V Voltage on (Note 5) V Average Current in V DD to Diode mA Maximum Recommended Operating Conditions Supply Voltage, V DD V to V Voltage on V to 00V Voltage on (repetitive Transient) -5V to 05V Voltage on.....v +7V to V +V and V DD - V to V DD +00V Slew Rate <50V/ns Thermal Information Thermal Resistance (Typical) θ JA ( C/W) θ JC ( C/W) 8 Ld SOIC (Notes, 0) Ld TDFN (Notes 7, 8) Ld DFN (Notes 7, 8) Ld DFN (Notes 7, 8) Max Power Dissipation at +25 C in Free Air 8 Ld SOIC (Notes, 0) W 0 Ld TDFN (Notes 7, 8) W 2 Ld DFN (Notes 7, 8) W 8 Ld DFN (Notes 7, 8) W Storage Temperature Range C to +50 C Junction Temperature Range C to +50 C Pb-free reflow profile see link below CAUTION: Do not operate at or near the maximum ratings listed for extended periods of time. Exposure to such conditions may adversely impact product reliability and result in failures not covered by warranty. NOTES:. The ISL20 and ISL2 are capable of derated operation at supply voltages exceeding V. Figure 22 shows the high-side voltage derating curve for this mode of operation. 5. All voltages referenced to V SS unless otherwise specified.. θ JA is measured in free air with the component mounted on a high effective thermal conductivity test board. See Tech Brief TB379 for details. 7. θ JA is measured in free air with the component mounted on a high effective thermal conductivity test board with direct attach features. See Tech Brief TB For θ JC, the case temp location is the center of the exposed metal pad on the package underside. 9. Parameters with MIN and/or MAX limits are 00% tested at +25 C, unless otherwise specified. Temperature limits established by characterization and are not production tested. 0. For θ JC, the case temp location is taken at the package top center. Electrical Specifications V DD = V = 2V, V SS = V = 0V, No Load on or, unless otherwise specified. T J = +25 C T J = -0 C to +25 C PARAMETERS SYMBOL TEST CONDITIONS MIN TYP MAX MIN (Note 9) MAX (Note 9) UNITS SUPPLY CURRENTS V DD Quiescent Current I DD ISL20; = = 0V ma V DD Quiescent Current I DD ISL2; = = 0V ma V DD Operating Current I DDO ISL20; f = 500kHz ma V DD Operating Current I DDO ISL2; f = 500kHz ma Total Quiescent Current I = = 0V ma Total Operating Current I O f = 500kHz ma to V SS Current, Quiescent I S = = 0V; V = V = V µa to V SS Current, Operating I SO f = 500kHz; V = V = V ma INPUT PINS Low Level Input Voltage Threshold V IL ISL V Low Level Input Voltage Threshold V IL ISL V High Level Input Voltage Threshold V IH ISL V High Level Input Voltage Threshold V IH ISL V Input Voltage Hysteresis V IHYS ISL V Input Pull-Down Resistance R I kω FN295.
5 Electrical Specifications V DD = V = 2V, V SS = V = 0V, No Load on or, unless otherwise specified. (Continued) T J = +25 C T J = -0 C to +25 C PARAMETERS SYMBOL TEST CONDITIONS MIN TYP MAX MIN (Note 9) MAX (Note 9) UNITS UNDERVOLTAGE PROTECTION V DD Rising Threshold V DDR V V DD Threshold Hysteresis V DDH V Rising Threshold V R V Threshold Hysteresis V H V BOOT STRAP DIODE Low Current Forward Voltage V DL I VDD- = 00µA V High Current Forward Voltage V DH I VDD- = 00mA V Dynamic Resistance R D I VDD- = 00mA Ω GATE DRIVER Low Level Output Voltage V OLL I = 00mA V High Level Output Voltage V OHL I = -00mA, V OHL = V DD - V V Peak Pull-Up Current I OHL V = 0V A Peak Pull-Down Current I OLL V = 2V A GATE DRIVER Low Level Output Voltage V OLH I = 00mA V High Level Output Voltage V OHH I = -00mA, V OHH = V - V V Peak Pull-Up Current I OHH V = 0V A Peak Pull-Down Current I OLH V = 2V A Switching Specifications V DD = V = 2V, V SS = V = 0V, No Load on or, unless otherwise specified. T J = +25 C T J = -0 C to +25 C PARAMETERS SYMBOL TEST CONDITIONS MIN TYP MAX MIN (Note 9) MAX (Note 9) UNITS Lower Turn-Off Propagation Delay ( Falling to Falling) t LPHL ns Upper Turn-Off Propagation Delay ( Falling to Falling) t HPHL ns Lower Turn-On Propagation Delay ( Rising to Rising) t LPLH ns Upper Turn-On Propagation Delay ( Rising to Rising) t HPLH ns Delay Matching: Upper Turn-Off to Lower Turn-On t MON ns Delay Matching: Lower Turn-Off to Upper Turn-On t MOFF - - ns Either Output Rise Time (0% to 90%) t RC C L = nf ns Either Output Fall Time (90% to 0%) t FC C L = nf ns Either Output Rise Time (3V to 9V) t R C L = 0.µF µs Either Output Fall Time (9V to 3V) t F C L = 0.µF µs Minimum Input Pulse Width that Changes the Output t PW ns Bootstrap Diode Turn-On or Turn-Off Time t BS ns 5 FN295.
6 Pin Descriptions SYMBOL DESCRIPTION V DD Positive supply to lower gate driver. Bypass this pin to V SS. V SS EPAD High-side bootstrap supply. External bootstrap capacitor is required. Connect positive side of bootstrap capacitor to this pin. Bootstrap diode is on-chip. High-side output. Connect to gate of high-side power MOSFET. High-side source connection. Connect to source of high-side power MOSFET. Connect negative side of bootstrap capacitor to this pin. High-side input. Low-side input. Chip negative supply, which will generally be ground. Low-side output. Connect to gate of low-side power MOSFET. No Connect. Exposed pad. Connect to ground or float. The EPAD is electrically isolated from all other pins. Timing Diagrams, t HPLH, t LPLH t HPHL, t LPHL, t MON t MOFF FIGURE 3. PROPAGATION DELAYS FIGURE. DELAY MATCNG Typical Performance Curves I DDO (ma).0 T = +25 C T = -0 C T = +25 C T = +50 C T = +25 C T = +50 C 0. 0k 00k k 0k 00k. 0 3 k FREQUEY (Hz) FIGURE 5. ISL20 I DD OPERATING CURRENT vs FREQUEY I DDO (ma).0 T = +25 C T = -0 C FREQUEY (Hz) FIGURE. ISL2 I DD OPERATING CURRENT vs FREQUEY FN295.
7 Typical Performance Curves (Continued) 0.0 T = +50 C 0.0 T = -0 C T = +50 C I O (ma).0 0. T = +25 C T = +25 C I SO (ma).0 0. T = +25 C T = -0 C 0.0 0k 00k. 0 3 k FREQUEY (Hz) FIGURE 7. I OPERATING CURRENT vs FREQUEY T = +25 C 0.0 0k 00k. 0 3 k FREQUEY (Hz) FIGURE 8. I S OPERATING CURRENT vs FREQUEY V OHL, V OHH (mv) V DD = V = V V DD = V = 2V V DD = V = 8V V OLL, V OLH (mv) V DD = V = V V DD = V = 8V V DD = V = 2V FIGURE 9. GH LEVEL OUTPUT VOLTAGE vs TEMPERATURE FIGURE 0. W LEVEL OUTPUT VOLTAGE vs TEMPERATURE V DDR, V R (V) V R V DDR V DDH, V H (V) V H V DDH FIGURE. UNDERVOLTAGE CKOUT THRESLD vs TEMPERATURE FIGURE 2. UNDERVOLTAGE CKOUT HYSTERESIS vs TEMPERATURE 7 FN295.
8 Typical Performance Curves (Continued) t LPLH, t LPHL, t HPLH, t HPHL (ns) t HPLH t LPLH t HPHL t LPHL t LPLH, t LPHL, t HPLH, t HPHL (ns) t HPLH t LPLH t HPHL t LPHL FIGURE 3. ISL20 PROPAGATION DELAYS vs TEMPERATURE FIGURE. ISL2 PROPAGATION DELAYS vs TEMPERATURE t MON, t MOFF (ns) t MON.5.0 t MOFF t MON, t MOFF (ns) t MON t MOFF FIGURE 5. ISL20 DELAY MATCNG vs TEMPERATURE FIGURE. ISL2 DELAY MATCNG vs TEMPERATURE I OHL, I OHH (A) V, V (V) V, V (V) I OHL, I OHH (A) FIGURE 7. PEAK PULL-UP CURRENT vs OUTPUT VOLTAGE FIGURE 8. PEAK PULL-DOWN CURRENT vs OUTPUT VOLTAGE 8 FN295.
9 Typical Performance Curves (Continued) I DD, I (µa) I DD I V DD, V (V) I DD, I (µa) I DD I V DD, V (V) FIGURE 9. ISL20 QUIESCENT CURRENT vs VOLTAGE FIGURE 20. ISL2 QUIESCENT CURRENT vs VOLTAGE FORWARD CURRENT (A) V TO V SS VOLTAGE (V) FORWARD VOLTAGE (V) V DD TO V SS VOLTAGE (V) FIGURE 2. BOOTSTRAP DIODE I-V CHARACTERISTICS FIGURE 22. V VOLTAGE vs V DD VOLTAGE All Intersil U.S. products are manufactured, assembled and tested utilizing ISO9000 quality systems. Intersil Corporation s quality certifications can be viewed at Intersil products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design, software and/or specifications at any time without notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be accurate and reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries. For information regarding Intersil Corporation and its products, see 9 FN295.
10 Package Outline Drawing L0.x 0 LEAD TN DUAL FLAT NO-LEAD PLASTIC PACKAGE Rev, /08 A.00 PIN # INDEX AREA 3.2 REF 8X 0.80 BSC B 5 0X 0. 0 PIN INDEX AREA (X) M C A B 0.05 M C 0 X 0.30 BOTTOM VIEW ( 3.00 ) ( 0 X 0.0 ) 0.75 SEE DETAIL "X" 0.0 C BASE PLANE C ( 3.80) ( 2.0) SIDE VIEW SEATING PLANE 0.08 C C 0. 2 REF ( 8X 0. 8 ) TYPICAL RECOMMENDED LAND PATTERN ( 0X ) DETAIL "X" MIN MAX. NOTES: Dimensions are in millimeters. Dimensions in ( ) for Reference Only. Dimensioning and tolerancing conform to AMSE Y.5m-99. Unless otherwise specified, tolerance : Decimal ± 0.05 Dimension b applies to the metallized terminal and is measured between 0.5mm and 0.30mm from the terminal tip. Tiebar shown (if present) is a non-functional feature. The configuration of the pin # identifier is optional, but must be located within the zone indicated. The pin # identifier may be either a mold or mark feature. 0 FN295.
11 Package Outline Drawing L2.xA 2 LEAD DUAL FLAT NO-LEAD PLASTIC PACKAGE Rev, 3/ A.00 PIN # INDEX AREA 3.2 REF 0X 0.50 BSC B 2X 0. 5 PIN INDEX AREA (X) M C A B 0.05 M C 2 X 0.25 BOTTOM VIEW ( 2.80 ) ( 2 X 0.5 ).00 MAX SEE DETAIL "X" 0.0 C BASE PLANE C ( 3.80) (.58) SIDE VIEW SEATING PLANE 0.08 C C 0. 2 REF ( 0X 0. 5 ) TYPICAL RECOMMENDED LAND PATTERN ( 2X 0. 25) DETAIL "X" MIN MAX. NOTES: Dimensions are in millimeters. Dimensions in ( ) for Reference Only. Dimensioning and tolerancing conform to AMSE Y.5m-99. Unless otherwise specified, tolerance : Decimal ± 0.05 Lead width applies to the metallized terminal and is measured between 0.5mm and 0.30mm from the terminal tip. Tiebar shown (if present) is a non-functional feature. The configuration of the pin # identifier is optional, but must be located within the zone indicated. The pin # identifier may be either a mold or mark feature. FN295.
12 Package Outline Drawing M8.5 8 LEAD NARROW BODY SMALL OUTNE PLASTIC PACKAGE Rev 3, 3/ ISL20, ISL2 DETAIL "A".27 (0.050) 0.0 (0.0) INDEX AREA.00 (0.57) 3.80 (0.50).20 (0.2) 5.80 (0.228) 0.50 (0.20) 0.25 (0.0) x (0.00) 0.9 (0.008) SIDE VIEW B 2.20 (0.087) SEATING PLANE (0.97).80 (0.89).75 (0.09).35 (0.053) (0.023).27 (0.050) 3 -C-.27 (0.050) 0.5(0.020) 0.33(0.03) 0.25(0.00) 0.0(0.00) (0.205) SIDE VIEW A TYPICAL RECOMMENDED LAND PATTERN NOTES:. Dimensioning and tolerancing per ANSI Y.5M Package length does not include mold flash, protrusions or gate burrs. Mold flash, protrusion and gate burrs shall not exceed 0.5mm (0.00 inch) per side. 3. Package width does not include interlead flash or protrusions. Interlead flash and protrusions shall not exceed 0.25mm (0.00 inch) per side.. The chamfer on the body is optional. If it is not present, a visual index feature must be located within the crosshatched area. 5. Terminal numbers are shown for reference only.. The lead width as measured 0.3mm (0.0 inch) or greater above the seating plane, shall not exceed a maximum value of 0.mm (0.02 inch). 7. Controlling dimension: MILMETER. Converted inch dimensions are not necessarily exact. 8. This outline conforms to JEDEC publication MS-02-AA ISSUE C. 2 FN295.
13 Package Outline Drawing L8.x 8 LEAD DUAL FLAT NO-LEAD PLASTIC PACKAGE Rev 0, /09 A.00 PIN # INDEX AREA 2. REF X 0.80 BSC B 8X 0. 0 ± 0.0 PIN INDEX AREA ± (X) ± M C A B 0.05 M C 8 X 0.30 BOTTOM VIEW ( 3.5 ) SEE DETAIL "X" ( 8 X 0.0 ) 0.9 ± C BASE PLANE C ( 3.80) ( 2.50) SIDE VIEW SEATING PLANE 0.08 C C 0. 2 REF ( X 0. 8 ) TYPICAL RECOMMENDED LAND PATTERN ( 8X ) MIN MAX. DETAIL "X" NOTES: Dimensions are in millimeters. Dimensions in ( ) for Reference Only. Dimensioning and tolerancing conform to ASME Y.5m-99. Unless otherwise specified, tolerance : Decimal ± 0.05 Dimension applies to the metallized terminal and is measured between 0.5mm and 0.30mm from the terminal tip. Tiebar shown (if present) is a non-functional feature. The configuration of the pin # identifier is optional, but must be located within the zone indicated. The pin # identifier may be either a mold or mark feature. 3 FN295.
ISL6700. 80V/1.25A Peak, Medium Frequency, Low Cost, Half-Bridge Driver. Features. Ordering Information. Applications. Pinouts
ISL6700 Data Sheet FN9077.6 80V/1.25A Peak, Medium Frequency, Low Cost, Half-Bridge Driver The ISL6700 is an 80V/1.25A peak, medium frequency, low cost, half-bridge driver IC available in 8-lead SOIC and
ICL7667. Dual Power MOSFET Driver. Features. Ordering Information. Applications. Pinout. Functional Diagram (Each Driver) FN2853.7
Data Sheet FN2853.7 Dual Power MOSFET Driver The is a dual monolithic high-speed driver designed to convert TTL level signals into high current outputs at voltages up to 5V. Its high speed and current
HI-200, HI-201. Features. Dual/Quad SPST, CMOS Analog Switches. Applications. Ordering Information. Functional Diagram FN3121.9
Data Sheet FN3121.9 Dual/Quad SPST, CMOS Analog Switches HI-200/HI-201 (dual/quad) are monolithic devices comprising independently selectable SPST switches which feature fast switching speeds (HI-200 240ns,
IRS2004(S)PbF HALF-BRIDGE DRIVER. Features. Product Summary. Packages
Features Floating channel designed for bootstrap operation Fully operational to + V Tolerant to negative transient voltage, dv/dt immune Gate drive supply range from V to V Undervoltage lockout. V, V,
ISL9204. Features. High Input Voltage Charger. Applications. Ordering Information. Pinout. Data Sheet October 4, 2005 FN9207.0
ISL9204 Data Sheet FN9207.0 High Input Voltage Charger The ISL9204 is a cost-effective, fully integrated high input voltage single-cell Li-ion battery charger. This charger performs the CC/CV charge function
CA3420. Features. 0.5MHz, Low Supply Voltage, Low Input Current BiMOS Operational Amplifier. Applications. Functional Diagram. Ordering Information
CA Data Sheet October, FN.9.MHz, Low Supply Voltage, Low Input Current BiMOS Operational Amplifier The CA is an integrated circuit operational amplifier that combines PMOS transistors and bipolar transistors
How To Test A 3.3V Duo Power Supply On An Isl6506Bi (Ios) With A Power Supply (I386) And Power Supply Power Supply With A 5V Power Supply
NOT RECOMMENDED FOR NEW DESIGNS NO RECOMMENDED REPLACEMENT contact our Technical Support Center at 1-888-INTERSIL or www.intersil.com/tsc Multiple Linear Power Controller with ACPI Control Interface The
High and Low Side Driver
High and Low Side Driver Features Product Summary Floating channel designed for bootstrap operation Fully operational to 200V Tolerant to negative transient voltage, dv/dt immune Gate drive supply range
Features DISPLAY DECODING INPUT INTERFACING
Data Sheet FN3158.8 4-Digit, LCD Display Driver The device is a non-multiplexed four-digit seven-segment CMOS LCD display decoder-driver. This device is configured to drive conventional LCD displays by
HA-5104/883. Low Noise, High Performance, Quad Operational Amplifier. Features. Description. Applications. Ordering Information. Pinout.
HA5104/883 April 2002 Features This Circuit is Processed in Accordance to MILSTD 883 and is Fully Conformant Under the Provisions of Paragraph 1.2.1. Low Input Noise Voltage Density at 1kHz. 6nV/ Hz (Max)
Features. Symbol JEDEC TO-220AB
Data Sheet June 1999 File Number 2253.2 3A, 5V,.4 Ohm, N-Channel Power MOSFET This is an N-Channel enhancement mode silicon gate power field effect transistor designed for applications such as switching
ICL232. +5V Powered, Dual RS-232 Transmitter/Receiver. Description. Features. Ordering Information. Applications. Functional Diagram.
ICL August V Powered, Dual RS Transmitter/Receiver Features Meets All RSC and V. Specifications Requires Only Single V Power Supply Onboard Voltage Doubler/Inverter Low Power Consumption Drivers ±V Output
IR2117(S)/IR2118(S) & (PbF)
Data Sheet No. PD14 Rev N IR2117(S)/IR211(S) & (PbF) Features Floating channel designed for bootstrap operation Fully operational to +V Tolerant to negative transient voltage dv/dt immune Gate drive supply
ICS514 LOCO PLL CLOCK GENERATOR. Description. Features. Block Diagram DATASHEET
DATASHEET ICS514 Description The ICS514 LOCO TM is the most cost effective way to generate a high-quality, high-frequency clock output from a 14.31818 MHz crystal or clock input. The name LOCO stands for
IR2110(-1-2)(S)PbF/IR2113(-1-2)(S)PbF HIGH AND LOW SIDE DRIVER Product Summary
Data Sheet No. PD6147 rev.u Features Floating channel designed for bootstrap operation Fully operational to +5V or +6V Tolerant to negative transient voltage dv/dt immune Gate drive supply range from 1
DG401, DG403. Monolithic CMOS Analog Switches. Features. Applications. Pinouts. Ordering Information FN3284.11. Data Sheet November 20, 2006
DG4, DG43 Data Sheet November 2, 26 FN3284. Monolithic MOS Analog Switches The DG4 and DG43 monolithic MOS analog switches have TTL and MOS compatible digital inputs. These switches feature low analog
X9C102, X9C103, X9C104, X9C503
X9C102, X9C103, X9C104, X9C503 Data Sheet FN8222.3 Digitally Controlled Potentiometer (XDCP ) The X9C102, X9C103, X9C104, X9C503 are Intersils digitally controlled (XDCP) potentiometers. The device consists
28V, 2A Buck Constant Current Switching Regulator for White LED
28V, 2A Buck Constant Current Switching Regulator for White LED FP7102 General Description The FP7102 is a PWM control buck converter designed to provide a simple, high efficiency solution for driving
IR2110(S)/IR2113(S) & (PbF)
Data Sheet No. PD6147 Rev.T Features Floating channel designed for bootstrap operation Fully operational to +5V or +6V Tolerant to negative transient voltage dv/dt immune Gate drive supply range from 1
TRIPLE PLL FIELD PROG. SPREAD SPECTRUM CLOCK SYNTHESIZER. Features
DATASHEET ICS280 Description The ICS280 field programmable spread spectrum clock synthesizer generates up to four high-quality, high-frequency clock outputs including multiple reference clocks from a low-frequency
CURRENT LIMITING SINGLE CHANNEL DRIVER V OFFSET. Packages
Features Floating channel designed for bootstrap operation Fully operational to +5V Tolerant to negative transient voltage dv/dt immune Gate drive supply range from 12 to 18V Undervoltage lockout Current
MC10SX1190. Fibre Channel Coaxial Cable Driver and Loop Resiliency Circuit
Fibre Channel Coaxial Cable Driver and Loop Resiliency Circuit Description The MC10SX1190 is a differential receiver, differential transmitter specifically designed to drive coaxial cables. It incorporates
MP2259 1A, 16V, 1.4MHz Step-Down Converter
MP59 1A, 1V, 1.MHz Step-Down Converter TM The Future of Analog IC Technology DESCRIPTION The MP59 is a monolithic integrated stepdown switch mode converter with an internal power MOSFET. It achieves 1A
L6384E. High voltage half-bridge driver. Description. Features. Applications
High voltage half-bridge driver Description Datasheet - production data Features High voltage rail up to 600 V dv/dt immunity ± 50 V/nsec in full temperature range Driver current capability 400 ma source
IR2109(4) (S) HALF-BRIDGE DRIVER. Features. Product Summary. Packages. Description. Typical Connection
Data Sheet No. PD66-T Features Floating channel designed for bootstrap operation Fully operational to +6V Tolerant to negative transient voltage dv/dt immune Gate drive supply range from to V Undervoltage
High-Speed, 5 V, 0.1 F CMOS RS-232 Driver/Receivers ADM202/ADM203
a FEATURES kb Transmission Rate ADM: Small (. F) Charge Pump Capacitors ADM3: No External Capacitors Required Single V Power Supply Meets EIA-3-E and V. Specifications Two Drivers and Two Receivers On-Board
TYPICAL APPLICATION CIRCUIT. ORDER INFORMATION SOP-EP 8 pin A703EFT (Lead Free) A703EGT (Green)
www.addmtek.com 2 CHANNELS 150mA HIGH VOLTAGE ADJUSTABLE CURRENT REGULATOR DESCRIPTION A703 is a high voltage, adjustable constant current driver for LED applications. Two regulated current ports are designed
CAT4101TV. 1 A Constant-Current LED Driver with PWM Dimming
A Constant-Current LED Driver with PWM Dimming Description The CAT4 is a constant current sink driving a string of high brightness LEDs up to A with very low dropout of.5 V at full load. It requires no
Features. Modulation Frequency (khz) VDD. PLL Clock Synthesizer with Spread Spectrum Circuitry GND
DATASHEET IDT5P50901/2/3/4 Description The IDT5P50901/2/3/4 is a family of 1.8V low power, spread spectrum clock generators capable of reducing EMI radiation from an input clock. Spread spectrum technique
Precision, Unity-Gain Differential Amplifier AMP03
a FEATURES High CMRR: db Typ Low Nonlinearity:.% Max Low Distortion:.% Typ Wide Bandwidth: MHz Typ Fast Slew Rate: 9.5 V/ s Typ Fast Settling (.%): s Typ Low Cost APPLICATIONS Summing Amplifiers Instrumentation
CA723, CA723C. Voltage Regulators Adjustable from 2V to 37V at Output Currents Up to 150mA without External Pass Transistors. Features.
CA73, CA73C Data Sheet April 1999 File Number 788. Voltage Regulators Adjustable from V to 37V at Output Currents Up to 1mA without External Pass Transistors The CA73 and CA73C are silicon monolithic integrated
MC14001B Series. B Suffix Series CMOS Gates MC14001B, MC14011B, MC14023B, MC14025B, MC14071B, MC14073B, MC14081B, MC14082B
MC4B Series BSuffix Series CMOS Gates MC4B, MC4B, MC4B, MC4B, MC4B, MC4B, MC4B, MC4B The B Series logic gates are constructed with P and N channel enhancement mode devices in a single monolithic structure
Data Sheet June 13, 2006. Features TEMP.
G48, G49 ata Sheet FN3283.8 Single 8-Channel/ifferential 4-Channel, CMOS Analog Multiplexers The G48 Single 8-Channel, and G49 ifferential 4-Channel monolithic CMOS analog multiplexers are drop-in replacements
MC14008B. 4-Bit Full Adder
4-Bit Full Adder The MC4008B 4bit full adder is constructed with MOS PChannel and NChannel enhancement mode devices in a single monolithic structure. This device consists of four full adders with fast
DG411, DG412, DG413. Monolithic Quad SPST, CMOS Analog Switches. Features. Applications FN3282.13. Data Sheet June 20, 2007
DG411, DG412, DG413 Data Sheet FN3282.13 Monolithic Quad SPST, MOS Analog Switches The DG411 series monolithic MOS analog switches are drop-in replacements for the popular DG211 and DG212 series devices.
IR1168S DUAL SMART RECTIFIER DRIVER IC
Datasheet No PD97382 September 26, 2011 IR1168S DUAL SMART RECTIFIER DRIVER IC Features Secondary-side high speed controller for synchronous rectification in resonant half bridge topologies 200V proprietary
SG2525A SG3525A REGULATING PULSE WIDTH MODULATORS
SG2525A SG3525A REGULATING PULSE WIDTH MODULATORS 8 TO 35 V OPERATION 5.1 V REFERENCE TRIMMED TO ± 1 % 100 Hz TO 500 KHz OSCILLATOR RANGE SEPARATE OSCILLATOR SYNC TERMINAL ADJUSTABLE DEADTIME CONTROL INTERNAL
V OUT. I o+ & I o- (typical) 2.3A & 3.3A. Package Type
July 25 th, 2012 Automotive Grade AUIRS4427S DUAL LOW SIDE DRIVER Features Gate drive supply range from 6 V to 20 V CMOS Schmitt-triggered inputs 3.3V and 5V logic compatible Two independent gate drivers
MC33064DM 5 UNDERVOLTAGE SENSING CIRCUIT
Order this document by MC3464/D The MC3464 is an undervoltage sensing circuit specifically designed for use as a reset controller in microprocessor-based systems. It offers the designer an economical solution
High Common-Mode Rejection. Differential Line Receiver SSM2141. Fax: 781/461-3113 FUNCTIONAL BLOCK DIAGRAM FEATURES. High Common-Mode Rejection
a FEATURES High Common-Mode Rejection DC: 00 db typ 60 Hz: 00 db typ 20 khz: 70 db typ 40 khz: 62 db typ Low Distortion: 0.00% typ Fast Slew Rate: 9.5 V/ s typ Wide Bandwidth: 3 MHz typ Low Cost Complements
SPREAD SPECTRUM CLOCK GENERATOR. Features
DATASHEET ICS7152 Description The ICS7152-01, -02, -11, and -12 are clock generators for EMI (Electro Magnetic Interference) reduction (see below for frequency ranges and multiplier ratios). Spectral peaks
CMOS Switched-Capacitor Voltage Converters ADM660/ADM8660
CMOS Switched-Capacitor Voltage Converters ADM66/ADM866 FEATURES ADM66: Inverts or Doubles Input Supply Voltage ADM866: Inverts Input Supply Voltage ma Output Current Shutdown Function (ADM866) 2.2 F or
ICS650-44 SPREAD SPECTRUM CLOCK SYNTHESIZER. Description. Features. Block Diagram DATASHEET
DATASHEET ICS650-44 Description The ICS650-44 is a spread spectrum clock synthesizer intended for video projector and digital TV applications. It generates three copies of an EMI optimized 50 MHz clock
1 TO 4 CLOCK BUFFER ICS551. Description. Features. Block Diagram DATASHEET
DATASHEET 1 TO 4 CLOCK BUFFER ICS551 Description The ICS551 is a low cost, high-speed single input to four output clock buffer. Part of IDT s ClockBlocks TM family, this is our lowest cost, small clock
A I DM. W/ C V GS Gate-to-Source Voltage ± 20. Thermal Resistance Symbol Parameter Typ. Max. Units
V DS 2 V V GS Max ± 2 V R DSon) max @V GS = V) 24 m * PD - 9787A HEXFET Power MOSFET R DSon) max @V GS = 4.V) 4 m 6 Micro3 TM SOT-23) Applications) Load System Switch Features and Benefits Features Benefits
Features INVERTING. 0.6mA NONINVERTING INVERTING. 0.6mA NONINVERTING
MIC442/442/4428 Dual 1.A-Peak Low-Side MOSFET Driver General Description The MIC442/442/4428 family are highly-reliable dual lowside MOSFET drivers fabricated on a BiCMOS/DMOS process for low power consumption
MASW-007070-0001TB. GaAs SPST Switch, Absorptive, Single Supply, DC-4.0 GHz. Features. Pin Configuration 1,2,3,4. Description. Ordering Information
Features Operates DC - 4 GHz on Single Supply ASIC TTL / CMOS Driver Low DC Power Consumption 50 Ohm Nominal Impedance Test Boards are Available Tape and Reel are Available Lead-Free 4 x 6 mm PQFN Package
SELF-OSCILLATING HALF-BRIDGE DRIVER
Data Sheet No. PD60029 revj I2155&(PbF) (NOTE: For new designs, we recommend I s new products I2153 and I21531) SELF-OSCILLATING HALF-BIDGE DIE Features Floating channel designed for bootstrap operation
LDS8720. 184 WLED Matrix Driver with Boost Converter FEATURES APPLICATION DESCRIPTION TYPICAL APPLICATION CIRCUIT
184 WLED Matrix Driver with Boost Converter FEATURES High efficiency boost converter with the input voltage range from 2.7 to 5.5 V No external Schottky Required (Internal synchronous rectifier) 250 mv
TSM2N7002K 60V N-Channel MOSFET
SOT-23 SOT-323 Pin Definition: 1. Gate 2. Source 3. Drain PRODUCT SUMMARY V DS (V) R DS(on) (Ω) I D (ma) 5 @ V GS = 10V 100 60 5.5 @ V GS = 5V 100 Features Low On-Resistance ESD Protection High Speed Switching
+5 V Powered RS-232/RS-422 Transceiver AD7306
a FEATURES RS- and RS- on One Chip Single + V Supply. F Capacitors Short Circuit Protection Excellent Noise Immunity Low Power BiCMOS Technology High Speed, Low Skew RS- Operation C to + C Operations APPLICATIONS
ISL8840A, ISL8841A, ISL8842A, ISL8843A, ISL8844A, ISL8845A
ISL8840A, ISL884A, ISL8842A, ISL8843A, ISL8844A, ISL8845A Data Sheet FN6320.3 High Performance Industry Standard Single-Ended Current Mode PWM Controller The ISL884xA is a high performance drop-in replacement
AAT4280 Slew Rate Controlled Load Switch
General Description Features SmartSwitch The AAT4280 SmartSwitch is a P-channel MOSFET power switch designed for high-side load switching applications. The P-channel MOSFET device has a typical R DS(ON)
Data Sheet January 2001. Features. Pinout. NUMBER OF BITS LINEARITY (INL, DNL) TEMP. RANGE ( o C) PACKAGE PKG. NO.
TM AD753, Data Sheet January 00 FN305. 8Bit, 0Bit Multiplying D/A Converters The AD753 and are monolithic, low cost, high performance, 8bit and 0bit accurate, multiplying digitaltoanalog converter (DAC),
ICL7660, ICL7660A. CMOS Voltage Converters. Features. Applications. Pinouts FN3072.7. Data Sheet October 10, 2005
ICL, ICLA Data Sheet October, FN. CMOS Voltage Converters The Intersil ICL and ICLA are monolithic CMOS power supply circuits which offer unique performance advantages over previously available devices.
SC728/SC729. 2A Low Vin, Very Low Ron Load Switch. POWER MANAGEMENT Features. Description. Applications. Typical Application Circuit SC728 / SC729
POWER MANAGEMT Features Input Voltage Range 1.1V to 2A Continuous Output Current Ultra-Low Ron 36mΩ Automatic Output Discharge Circuit Fast Turn-on Option With No Output Discharge Circuit SC728 Extended
PAM2804. Pin Assignments. Description. Applications. Features. Typical Applications Circuit 1A STEP-DOWN CONSTANT CURRENT, HIGH EFFICIENCY LED DRIVER
1A STEP-DOWN CONSTANT CURRENT, HIGH EFFICIENCY LED DRIER Description Pin Assignments The is a step-down constant current LED driver. When the input voltage is down to lower than LED forward voltage, then
High-Speed, 5 V, 0.1 F CMOS RS-232 Drivers/Receivers ADM222/ADM232A/ADM242
a FEATURES 200 kb/s Transmission Rate Small (0. F) Charge Pump Capacitors Single V Power Supply Meets All EIA-232-E and V.2 Specifications Two Drivers and Two Receivers On-Board DC-DC Converters V Output
MIC4451/4452. General Description. Features. Applications. Functional Diagram V S. 12A-Peak Low-Side MOSFET Driver. Bipolar/CMOS/DMOS Process
12A-Peak Low-Side MOSFET Driver Bipolar/CMOS/DMOS Process General Description MIC4451 and MIC4452 CMOS MOSFET drivers are robust, efficient, and easy to use. The MIC4451 is an inverting driver, while the
.OPERATING SUPPLY VOLTAGE UP TO 46 V
L298 DUAL FULL-BRIDGE DRIVER.OPERATING SUPPLY VOLTAGE UP TO 46 V TOTAL DC CURRENT UP TO 4 A. LOW SATURATION VOLTAGE OVERTEMPERATURE PROTECTION LOGICAL "0" INPUT VOLTAGE UP TO 1.5 V (HIGH NOISE IMMUNITY)
LM350. 3.0 A, Adjustable Output, Positive Voltage Regulator THREE TERMINAL ADJUSTABLE POSITIVE VOLTAGE REGULATOR
3. A, able Output, Positive Voltage Regulator The is an adjustable threeterminal positive voltage regulator capable of supplying in excess of 3. A over an output voltage range of 1.2 V to 33 V. This voltage
Last Time Buy. Deadline for receipt of LAST TIME BUY orders: April 30, 2011
Last Time Buy This part is in production but has been determined to be LAST TIME BUY. This classification indicates that the product is obsolete and notice has been given. Sale of this device is currently
Description. For Fairchild s definition of Eco Status, please visit: http://www.fairchildsemi.com/company/green/rohs_green.html.
FSA2357 Low R ON 3:1 Analog Switch Features 10µA Maximum I CCT Current Over an Expanded Control Voltage Range: V IN=2.6V, V CC=4.5V On Capacitance (C ON): 70pF Typical 0.55Ω Typical On Resistance (R ON)
AAT3520/2/4 MicroPower Microprocessor Reset Circuit
General Description Features PowerManager The AAT3520 series of PowerManager products is part of AnalogicTech's Total Power Management IC (TPMIC ) product family. These microprocessor reset circuits are
High Speed, Low Power Dual Op Amp AD827
a FEATURES High Speed 50 MHz Unity Gain Stable Operation 300 V/ms Slew Rate 120 ns Settling Time Drives Unlimited Capacitive Loads Excellent Video Performance 0.04% Differential Gain @ 4.4 MHz 0.198 Differential
NTMS4920NR2G. Power MOSFET 30 V, 17 A, N Channel, SO 8 Features
NTMS9N Power MOSFET 3 V, 7 A, N Channel, SO Features Low R DS(on) to Minimize Conduction Losses Low Capacitance to Minimize Driver Losses Optimized Gate Charge to Minimize Switching Losses These Devices
AP1509. 150KHz, 2A PWM BUCK DC/DC CONVERTER. Description. Pin Assignments V IN. Applications. Features. (Top View) GND GND. Output AP1509 GND GND
Description Pin Assignments The series are monolithic IC designed for a stepdown DC/DC converter, and own the ability of driving a 2A load without additional transistor. It saves board space. The external
MM74HC4538 Dual Retriggerable Monostable Multivibrator
MM74HC4538 Dual Retriggerable Monostable Multivibrator General Description The MM74HC4538 high speed monostable multivibrator (one shots) is implemented in advanced silicon-gate CMOS technology. They feature
A I DM. W/ C V GS Gate-to-Source Voltage ± 12. Thermal Resistance Symbol Parameter Typ. Max. Units
V DS 2 V V GS Max ±2 V * PD - 973A HEXFET Power MOSFET R DSon) max @V GS = 4.V) 2. m R DSon) max @V GS = 2.V) 27. m 6 Micro3 TM SOT-23) Applications) Load System Switch Features and Benefits Features Benefits
Advanced Monolithic Systems
Advanced Monolithic Systems FEATURES Three Terminal Adjustable or Fixed oltages* 1.5, 1.8, 2.5, 2.85, 3.3 and 5. Output Current of 1A Operates Down to 1 Dropout Line Regulation:.2% Max. Load Regulation:.4%
MP2456 0.5A, 50V, 1.2MHz Step-Down Converter in a TSOT23-6
MP2456 0.5A, 50V, 1.2MHz Step-Down Converter in a TSOT23-6 DESCRIPTION The MP2456 is a monolithic, step-down, switchmode converter with a built-in power MOSFET. It achieves a 0.5A peak-output current over
AS2815. 1.5A Low Dropout Voltage Regulator Adjustable & Fixed Output, Fast Response
1.5A Low Dropout oltage Regulator Adjustable & Fixed Output, Fast Response FEATURES Adjustable Output Down To 1.2 Fixed Output oltages 1.5, 2.5, 3.3, 5.0 Output Current of 1.5A Low Dropout oltage 1.1 Typ.
Features. V PP IN V CC3 IN V CC5 IN (opt) EN0 EN1 MIC2562
MIC2562A /CardBus Socket Power Controller General Description The MIC2562A (Personal Computer Memory Card International Association) and CardBus power controller handles all PC Card slot power supply pins,
CD4027BMS. CMOS Dual J-K Master-Slave Flip-Flop. Pinout. Features. Functional Diagram. Applications. Description. December 1992
CD7BMS December 199 CMOS Dual J-K Master-Slave Flip-Flop Features Pinout High Voltage Type (V Rating) Set - Reset Capability CD7BMS TOP VIEW Static Flip-Flop Operation - Retains State Indefinitely with
AP1510. General Description. Features. Applications. Typical Application Circuit PWM CONTROL 3A STEP-DOWN CONVERTER AP1510. x (1+R A = V FB /R B
Features General Description Input voltage: 3.6 to 23 Output voltage: 0.8 to CC. Duty ratio: 0% to 100% PWM control Oscillation frequency: 300kHz typ. Current Limit, Enable function Thermal Shutdown function
Push-Pull FET Driver with Integrated Oscillator and Clock Output
19-3662; Rev 1; 5/7 Push-Pull FET Driver with Integrated Oscillator General Description The is a +4.5V to +15V push-pull, current-fed topology driver subsystem with an integrated oscillator for use in
MAX14760/MAX14762/MAX14764 Above- and Below-the-Rails Low-Leakage Analog Switches
19-652; Rev 1; 8/12 EVALUATION KIT AVAILABLE MAX1476// General Description The MAX1476// analog switches are capable of passing bipolar signals that are beyond their supply rails. These devices operate
SM712 Series 600W Asymmetrical TVS Diode Array
SM712 Series 6W Asymmetrical TVS Diode Array RoHS Pb GREEN Description The SM712 TVS Diode Array is designed to protect RS-485 applications with asymmetrical working voltages (-7V to from damage due to
Rail-to-Rail, High Output Current Amplifier AD8397
Rail-to-Rail, High Output Current Amplifier AD8397 FEATURES Dual operational amplifier Voltage feedback Wide supply range from 3 V to 24 V Rail-to-rail output Output swing to within.5 V of supply rails
SG1731/SG2731/SG3731. Description. Features. High Reliability Features. Block Diagram DC MOTOR PULSE WIDTH MODULATOR
DC MOTOR PULSE WIDTH MODULATOR SG1731/SG2731/SG3731 Description The SG1731 is a pulse width modulator circuit designed specifically for DC motor control. It provides a bi-directional pulse train output
28 V, 56 m, Load Switch with Programmable Current Limit and Slew Rate Control
28 V, 56 m, Load Switch with Programmable Current Limit and Slew Rate Control OPERATION DESCRIPTION SiP32419 and SiP32429 are load switches that integrate multiple control features that simplify the design
SG6516 PC Power Supply Supervisors
SG6516 PC Power Supply Supervisors Features Two 12V Sense Input Pins: VS12 and VS12B Over-Voltage Protection (OVP) for 3.3V, 5V, and two 12V Over-Current Protection (OCP) for 3.3V, 5V, and two 12V Under-Voltage
LM317, NCV317. 1.5 A Adjustable Output, Positive Voltage Regulator
, NCV317 A able Output, Positive Voltage Regulator The is an adjustable 3terminal positive voltage regulator capable of supplying in excess of A over an output voltage range of 1.2 V to 37 V. This voltage
DATA SHEET. TDA1543 Dual 16-bit DAC (economy version) (I 2 S input format) INTEGRATED CIRCUITS
INTEGRATED CIRCUITS DATA SHEET File under Integrated Circuits, IC01 February 1991 FEATURES Low distortion 16-bit dynamic range 4 oversampling possible Single 5 V power supply No external components required
SDC15. TVS Diode Array for ESD Protection of 12V Data and Power Lines. PROTECTION PRODUCTS Description. Features. Mechanical Characteristics
Description The SDC15 transient voltage suppressor (TVS) is designed to protect components which are connected to data and transmission lines from voltage surges caused by electrostatic discharge (ESD),
MC74AC138, MC74ACT138. 1-of-8 Decoder/Demultiplexer
-of-8 Decoder/Demultiplexer The MC74AC38/74ACT38 is a high speed of 8 decoder/demultiplexer. This device is ideally suited for high speed bipolar memory chip select address decoding. The multiple input
DG2731/2732/2733. Low Voltage, 0.4 Ω, Dual SPDT Analog Switch. Vishay Siliconix. RoHS COMPLIANT FEATURES
Low Voltage, 0.4 Ω, Dual SPDT Analog Switch DG273/2732/2733 DESCRIPTION The DG273/2732/2733 are low voltage, low on-resistance, dual single-pole/double-throw (SPDT) monolithic CMOS analog switches designed
SKY13370-374LF: 0.5 to 6.0 GHz SPDT Switch, 50 Ω Terminated
DATA SHEET SKY13370-374LF: 0.5 to 6.0 GHz SPDT Switch, 50 Ω Terminated Applications WiMAX 802.16 RF1 RF2 Dual-band WLANs (802.11 a/b/g/n) LTE/4G systems 50 Ω 50 Ω Features 50 Ω matched RF ports in all
Ultra Low Noise, Precision Voltage Reference
Ultra Low Noise, Precision Voltage Reference ISL9 The ISL9 is a ultra low noise, high DC accuracy precision voltage reference with wide input voltage range. The ISL9 uses the new Intersil Advanced Bipolar
5 V, 1 A H-Bridge Motor Driver
, A H-Bridge Motor Driver DESCRIPTION The SIP200 is an integrated, buffered H-bridge with TTL and CMOS compatible inputs with the capability of delivering up to A continuous current at DD supply. The SIP200
ISL55100B. Quad 18V Pin Electronics Driver/Window Comparator. Features. Applications. Functional Block Diagram. Ordering Information FN6229.
ISL551B Data Sheet FN6229. Quad 18V Pin Electronics Driver/Window Comparator The ISL551B is a Quad pin driver and window comparator fabricated in a wide voltage CMOS process. It is designed specifically
TM MP2305 2A, 23V SYNCHRONOUS RECTIFIED, STEP-DOWN CONVERTER
The Future of Analog IC Technology TM TM MP305 A, 3 Synchronous Rectified Step-Down Converter DESCRIPTION The MP305 is a monolithic synchronous buck regulator. The device integrates 30mΩ MOSFETS that provide
DG2515, DG2516. 3-Ω, 235-MHz Bandwidth, Dual SPDT Analog Switch. Vishay Siliconix. Not for New Design. RoHS COMPLIANT DESCRIPTION FEATURES BENEFITS
Not for New Design DG, DG -Ω, -MHz Bandwidth, Dual SPDT Analog Switch DESCRIPTION The DG, DG are low-voltage dual single-pole/ double-throw monolithic CMOS analog switches. Designed to operate from.8 V
23-26GHz Reflective SP4T Switch. GaAs Monolithic Microwave IC in SMD leadless package
CHS2411-QDG Description GaAs Monolithic Microwave IC in SMD leadless package The CHS2411-QDG (CHS2412-QDG, see Note) is a monolithic reflective SP4T switch in K-Band. Positive supply voltage only is required.
A1301 and A1302. Continuous-Time Ratiometric Linear Hall Effect Sensor ICs DESCRIPTION FEATURES AND BENEFITS. Packages:
FEATURES AN BENEFITS Low-noise output Fast power-on time Ratiometric rail-to-rail output 4.5 to 6.0 V operation Solid-state reliability Factory-programmed at end-of-line for optimum performance Robust
A3968. Dual Full-Bridge PWM Motor Driver
Dual Full-Bridge PWM Motor Driver Features and Benefits ±650 ma continuous output current 30 V output voltage rating Internal fixed-frequency PWM current control Satlington sink drivers Brake mode User-selectable
C Soldering Temperature, for 10 seconds 300 (1.6mm from case )
l Advanced Process Technology l Ultra Low On-Resistance l Dynamic dv/dt Rating l 75 C Operating Temperature l Fast Switching l Fully Avalanche Rated l Optimized for SMPS Applications Description Advanced
NCT65. Remote Trip Point Temperature Sensor with Overtemperature Shutdown
Remote Trip Point Temperature Sensor with Overtemperature Shutdown Description The is a low power temperature monitor housed in an MSOP8 package. It monitors the temperature of a remote thermal diode.
STCS1. 1.5 A max constant current LED driver. Features. Applications. Description
1.5 A max constant current LED driver Features Up to 40 V input voltage Less than 0.5 V voltage overhead Up to 1.5 A output current PWM dimming pin Shutdown pin LED disconnection diagnostic DFN8 (3x3 mm)
MP2365 3A, 28V, 1.4MHz Step-Down Converter
The Future of Analog IC Technology MP365 3A, 8,.MHz Step-Down Converter DESCRIPTION The MP365 is a.mhz step-down regulator with a built-in Power MOSFET. It achieves 3A continuous output current over a