In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

Transcription

1 Important notice Dear Customer, On 7 February 217 the former NXP Standard Product business became a new company with the tradename Nexperia. Nexperia is an industry leading supplier of Discrete, Logic and PowerMOS semiconductors with its focus on the automotive, industrial, computing, consumer and wearable application markets In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below. Instead of or use Instead of sales.addresses@ or sales.addresses@ use salesaddresses@nexperia.com ( ) Replace the copyright notice at the bottom of each page or elsewhere in the document, depending on the version, as shown below: - NXP N.V. (year). All rights reserved or Koninklijke Philips Electronics N.V. (year). All rights reserved Should be replaced with: - Nexperia B.V. (year). All rights reserved. If you have any questions related to the data sheet, please contact our nearest sales office via or telephone (details via salesaddresses@nexperia.com). Thank you for your cooperation and understanding, Kind regards, Team Nexperia

2 M3D88 Rev. 1 2 October 23 Product data 1. Product profile 1.1 Description N-channel enhancement mode field-effect transistor in a plastic package using TrenchMOS technology. 1.2 Features Logic level compatible Very fast switching Subminiature surface mount package Gate-source ESD protection diodes. 1.3 Applications Relay driver High speed line driver. 2. Pinning information 1.4 Quick reference data V DS 6 V I D 34 ma P tot.83 W R DSon 3.9 Ω. Table 1: Pinning - SOT23, simplified outline and symbol Pin Description Simplified outline Symbol 1 gate (g) 2 source (s) 3 drain (d) 3 d 1 2 g Top view SOT23 MSB3 s 3ab6

3 3. Ordering information Table 2: Ordering information Type number Package Name Description Version SOT23 Plastic surface mounted package; 3 leads. SOT23 4. Limiting values Table 3: Limiting values In accordance with the Absolute Maximum Rating System (IEC 6134). Symbol Parameter Conditions Min Max Unit V DS drain-source voltage (DC) 25 C T j 15 C - 6 V V DGR drain-gate voltage (DC) 25 C T j 15 C; R GS =2kΩ - 6 V V GS gate-source voltage (DC) - ±15 V I D drain current (DC) T sp =25 C; V GS =1V;Figure 2 and 3-34 ma T sp = 1 C; V GS =1V;Figure ma I DM peak drain current T sp =25 C; pulsed; t p 1 µs; Figure 3-68 ma P tot total power dissipation T sp =25 C; Figure W T stg storage temperature C T j junction temperature C Source-drain diode I S source (diode forward) current (DC) T sp =25 C - 34 ma I SM peak source (diode forward) current T sp =25 C; pulsed; t p 1 µs - 68 ma Electrostatic discharge voltage V esd electrostatic discharge voltage Human Body Model 1; C = 1 pf; R = 1.5 kω - 1 kv Koninklijke Philips Electronics N.V. 23. All rights reserved. Product data Rev. 1 2 October 23 2 of 12

4 12 3aa aa25 P der (%) I der (%) T sp ( C) T sp ( C) P der P tot I D = % I P der = % I tot ( 25 C ) D25C ( ) Fig 1. Normalized total power dissipation as a function of solder point temperature. Fig 2. Normalized continuous drain current as a function of solder point temperature. 1 3an66 ID (A) Limit RDSon = VDS/ ID tp = 1 µs 1 µs 1-1 DC 1 ms 1 ms 1 ms V DS (V) Fig 3. T sp =25 C; I DM is single pulse; V GS =1V Safe operating area; continuous and peak drain currents as a function of drain-source voltage Koninklijke Philips Electronics N.V. 23. All rights reserved. Product data Rev. 1 2 October 23 3 of 12

5 5. Thermal characteristics Table 4: Thermal characteristics Symbol Parameter Conditions Min Typ Max Unit R th(j-sp) thermal resistance from junction to solder point Figure K/W R th(j-a) thermal resistance from junction to ambient minimum footprint; mounted on a printed-circuit board K/W 5.1 Transient thermal impedance 1 3 3aa39 Z th(j-sp) (K/W) 1 2 δ = P t p δ = T 1 single pulse tp (s) t p T t Fig 4. Transient thermal impedance from junction to solder point as a function of pulse duration Koninklijke Philips Electronics N.V. 23. All rights reserved. Product data Rev. 1 2 October 23 4 of 12

6 6. Characteristics Table 5: Characteristics T j =25 C unless otherwise specified. Symbol Parameter Conditions Min Typ Max Unit Static characteristics V (BR)DSS drain-source breakdown voltage I D =1µA; V GS =V T j =25 C V T j = 55 C V V (BR)GSS drain-source breakdown voltage I G = ±1 ma; V DS = V V V GS(th) gate-source threshold voltage I D = 1 ma; V DS =V GS ; Figure 9 V T j =25 C V T j = 15 C V T j = 55 C V I DSS drain-source leakage current V DS =48V; V GS =V T j =25 C µa T j = 15 C µa I GSS gate-source leakage current V GS = ±1 V; V DS = V na R DSon drain-source on-state resistance V GS = 1 V; I D = 5 ma; Figure 7 and 8 T j =25 C Ω T j = 15 C Ω V GS = 4.5 V; I D = 2 ma; Figure 7 and Ω Dynamic characteristics C iss input capacitance V GS =V; V DS = 1 V; f = 1 MHz; pf C oss output capacitance Figure pf C rss reverse transfer capacitance pf t on turn-on time V DD =5V; R L = 25 Ω; ns t off turn-off time V GS =1V;R G =5Ω; R GS =5Ω ns Source-drain diode V SD source-drain (diode forward) voltage I S = 3 ma; V GS =V;Figure V t rr reverse recovery time I S = 3 ma; di S /dt = 1 A/µs; ns Q r recovered charge V GS =V; V R =25V nc Koninklijke Philips Electronics N.V. 23. All rights reserved. Product data Rev. 1 2 October 23 5 of 12

7 .5 I D (A).4 T j = 25 C V GS = 1V 3an7 6 V 4.5 V.5 I D (A).4 V DS > I D x R DSon 3an V V.2 15 C T j = 25 C.1 3 V V DS (V) V GS (V) Fig 5. T j =25 C Output characteristics: drain current as a function of drain-source voltage; typical values. Fig 6. T j =25 C and 15 C; V DS > I D xr DSon Transfer characteristics: drain current as a function of gate-source voltage; typical values. 1 RDSon (Ω) 8 3an71 VGS = 3.5 V Tj = 25 C 4 V a aa V V 2 1 V ID (A) T j ( C) T j =25 C R a = DSon R DSon ( 25 C ) Fig 7. Drain-source on-state resistance as a function of drain current; typical values. Fig 8. Normalized drain-source on-state resistance factor as a function of junction temperature Koninklijke Philips Electronics N.V. 23. All rights reserved. Product data Rev. 1 2 October 23 6 of 12

8 2.4 3aa aa37 V GS(th) (V) 1.8 typ I D (A) min min typ T j ( C) V GS (V) Fig 9. I D = 1 ma; V DS =V GS T j =25 C; V DS =5V Gate-source threshold voltage as a function of junction temperature. Fig 1. Sub-threshold drain current as a function of gate-source voltage aa46 C (pf) Ciss 1 Coss Crss VDS (V) V GS = V; f = 1 MHz Fig 11. Input, output and reverse transfer capacitances as a function of drain-source voltage; typical values Koninklijke Philips Electronics N.V. 23. All rights reserved. Product data Rev. 1 2 October 23 7 of 12

9 .5 3an ab9 I S (A).4 V GS = V V GS (V) I D =.5A V DD = 48 V 1 T j = 25 C C T j = 25 C V SD (V) Q G (nc) T j =25 C and 15 C; V GS =V I D =.5 A; V DD =48V Fig 12. Source (diode forward) current as a function of source-drain (diode forward) voltage; typical values. Fig 13. Gate-source voltage as a function of gate charge; typical values Koninklijke Philips Electronics N.V. 23. All rights reserved. Product data Rev. 1 2 October 23 8 of 12

10 7. Package outline Plastic surface mounted package; 3 leads SOT23 D B E A X H E v M A 3 Q A A c e 1 b p w M B L p e detail X 1 2 mm scale DIMENSIONS (mm are the original dimensions) UNIT A A 1 max. 1.1 mm.1.9 b p c D E e e 1 H E L p Q v w OUTLINE VERSION SOT23 REFERENCES IEC JEDEC EIAJ TO-236AB EUROPEAN PROJECTION ISSUE DATE Fig 14. SOT Koninklijke Philips Electronics N.V. 23. All rights reserved. Product data Rev. 1 2 October 23 9 of 12

11 8. Revision history Table 6: Revision history Rev Date CPCN Description Product data ( ) Koninklijke Philips Electronics N.V. 23. All rights reserved. Product data Rev. 1 2 October 23 1 of 12

12 9. Data sheet status Level Data sheet status [1] Product status [2][3] Definition I Objective data Development This data sheet contains data from the objective specification for product development. Philips Semiconductors reserves the right to change the specification in any manner without notice. II Preliminary data Qualification This data sheet contains data from the preliminary specification. Supplementary data will be published at a later date. Philips Semiconductors reserves the right to change the specification without notice, in order to improve the design and supply the best possible product. III Product data Production This data sheet contains data from the product specification. Philips Semiconductors reserves the right to make changes at any time in order to improve the design, manufacturing and supply. Relevant changes will be communicated via a Customer Product/Process Change Notification (CPCN). [1] Please consult the most recently issued data sheet before initiating or completing a design. [2] The product status of the device(s) described in this data sheet may have changed since this data sheet was published. The latest information is available on the Internet at URL [3] For data sheets describing multiple type numbers, the highest-level product status determines the data sheet status. 1. Definitions Short-form specification The data in a short-form specification is extracted from a full data sheet with the same type number and title. For detailed information see the relevant data sheet or data handbook. Limiting values definition Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 6134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or modification. 11. Disclaimers customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application. Right to make changes Philips Semiconductors reserves the right to make changes in the products - including circuits, standard cells, and/or software - described or contained herein in order to improve design and/or performance. When the product is in full production (status Production ), relevant changes will be communicated via a Customer Product/Process Change Notification (CPCN). Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no licence or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified. 12. Trademarks TrenchMOS is a trademark of Koninklijke Philips Electronics N.V. Life support These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips Semiconductors Contact information For additional information, please visit For sales office addresses, send to: sales.addresses@ Fax: Koninklijke Philips Electronics N.V. 23. All rights reserved. Product data Rev. 1 2 October of 12

13 Contents 1 Product profile Description Features Applications Quick reference data Pinning information Ordering information Limiting values Thermal characteristics Transient thermal impedance Characteristics Package outline Revision history Data sheet status Definitions Disclaimers Trademarks Koninklijke Philips Electronics N.V. 23. Printed in The Netherlands All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights. Date of release: 2 October 23 Document order number: