the machine and check the components Starter Ink Cartridges Basic User s Guide Product Safety Guide Telephone Line Cord

Transcription

1 Quik Setup Guie Strt Here MFC-J6520DW MFC-J6720DW Thnk you for hoosing Brother, your support is importnt to us n we vlue your usiness. Your Brother prout is engineere n mnufture to the highest stnrs to eliver relile performne, y-in n y-out. Plese re the Prout Sfety Guie first efore you set up your mhine. Then, plese re this Quik Setup Guie for the orret setup n instlltion. Mnuls in Spnish for this moel re ville on the enlose CD-ROM. Mnules en Espñol pr este moelo están isponiles en el CD-ROM inluio. WARNING CAUTION IMPORTANT WARNING inites potentilly hzrous sitution whih, if not voie, oul result in eth or serious injuries. CAUTION inites potentilly hzrous sitution whih, if not voie, my result in minor or moerte injuries. IMPORTANT inites potentilly hzrous sitution whih, if not voie, my result in mge to property or loss of prout funtionlity. Notes tell you how to respon to sitution tht my rise or give tips out how the opertion works with other fetures. Unpk the mhine n hek the omponents Most of the illustrtions in this Quik Setup Guie show the MFC-J6720DW. The omponents inlue in the ox my iffer epening on your ountry. Upper try Lower try 2 Strter Ink Crtriges Blk Yellow Cyn Mgent Quik Setup Guie CD-ROM* Bsi User s Guie Prout Sfety Guie Telephone Line Cor * If your omputer oes not hve CD-ROM rive, the supplie CD-ROM oes not ontin rivers for your operting system, or you wnt to ownlo mnuls n utilities, visit your moel pge t WARNING Plsti gs re use in the pking of your mhine. Plsti gs re not toys. To voi the nger of suffotion, keep these gs wy from ies n hilren n ispose of them orretly. CAUTION (For MFC-J6720DW) To prevent possile injuries, t lest two people shoul lift the prout. One person shoul hol the front of the prout, n one person shoul hol the k. Be reful not to trp your fingers when you put the prout own. USA/CAN Version 0

2 Remove the protetive tpe n film overing the mhine, n lso from the Touhsreen. Mke sure you hve ll the omponents. Sve ll pking mterils n the ox in se for ny reson you must ship your mhine. You nee to purhse the orret interfe le for the interfe you wnt to use (for USB or network onnetion). USB le We reommen using USB 2.0 le (Type A/B) tht is no more thn 6 feet (five meters) long. Network le Use stright-through Ctegory5 (or greter) twiste-pir le for 0BASE-T or 00BASE-TX Fst Ethernet Network. If you o not pln to use the fx feture on this mhine, go to step 3 on pge 4. To prolong the life of the print he, provie the est ink rtrige eonomy n mintin print qulity, we o not reommen unplugging the mhine frequently n/or leving the mhine unplugge for extene perios of time. Eh time you plug the mhine in, it utomtilly lens the print hes, whih uses some of your ink. We reommen using to power own the mhine. Using llows miniml power to the mhine, resulting in perioi, ut less frequent, lening of the print hes. Lift the snner over until it loks seurely into the open position. 2 Connet the power or n telephone line DO NOT onnet the USB le yet (if you re using USB le). Connet the power or. 2

3 Connet the telephone line or. Connet one en of the telephone line or to the jk mrke LINE on the mhine. Crefully guie the telephone line or into the le hnnel n out the k of the mhine. Connet the other en to moulr wll jk. If you re shring one telephone line with n externl telephone, onnet it s shown elow. Before you onnet the externl telephone, remove the white protetive p from the EXT. jk on the mhine. 2 3 Extension telephone Externl telephone Protetive p IMPORTANT The telephone line or MUST e onnete to the jk mrke LINE on the mhine. Gently lose the snner over using the finger hols on eh sie. If you re shring one telephone line with n externl telephone nswering mhine, onnet it s shown elow. Before you onnet the externl telephone nswering mhine, remove the white protetive p from the EXT. jk on the mhine. CAUTION Be reful not to pinh your fingers when you lose the snner over. Alwys use the finger hols provie on eh sie of the snner over when opening n losing it. Protetive p Set the reeive moe to Externl TAD if you hve n externl nswering mhine. See Choose the orret Reeive Moe on pge 2. For itionl etils, see Conneting n externl TAD (telephone nswering evie) in hpter 6 of the Bsi User s Guie. 3

4 3 Instll the ink rtriges Remove the ornge protetive prt. CAUTION If ink gets in your eyes, wsh it out with wter t one n ll otor if you re onerne. Mke sure you instll the Strter Ink Crtriges inlue with your mhine first. Mke sure tht the power is turne on. The Touhsreen will show No Ink Crtrige. You n just the ngle of the ontrol pnel y lifting it. To lower this ontrol pnel, push the relese utton tht is lote ehin the ontrol pnel, s shown in the illustrtion. Do not throw wy the ornge protetive prt. You will nee it if you trnsport the mhine. Lift the snner over into the open position. Open the ink rtrige over. 4

5 e Store the ornge protetive prt in the holer insie the mhine s shown. Mke sure tht the two projetions on the ottom of the ornge protetive prt fit into the two slots in the holer. g Unpk the ink rtrige. Turn the green relese lever on the ornge protetive pking ounterlokwise until it liks to relese the vuum sel. Then remove the ornge protetive pking s shown. IMPORTANT DO NOT shke the ink rtriges. If ink stins your skin or lothing, wsh with sop or etergent t one. DO NOT touh the rtrige in the re inite, s this n use the mhine not to funtion with the rtrige. 2 f Gently lose the snner over using the finger hols on eh sie. 2 CAUTION Be reful not to pinh your fingers when you lose the snner over. Alwys use the finger hols provie on eh sie of the snner over when opening n losing it. 5

6 h i Tke re to mth the stiker olor with the rtrige olor s shown in the igrm elow. Instll eh ink rtrige in the iretion of the rrow on the lel. 2 Gently push the k of the ink rtrige mrke PUSH until it lthes. After ll the ink rtriges re instlle, lose the ink rtrige over. IMPORTANT DO NOT tke out ink rtriges if you o not nee to reple them. If you o so, it my reue the ink quntity n the mhine will not know the quntity of ink left in the rtrige. DO NOT repetely insert n remove the rtriges. If you o so, ink my seep out of the rtrige. One you open n ink rtrige, instll it in the mhine n use it up within six months of instlltion. Use unopene ink rtriges y the expirtion te written on the rtrige pkge. DO NOT ismntle or tmper with the ink rtrige, this n use the ink to lek out of the rtrige. Brother strongly reommens tht you o not refill the ink rtriges provie with your mhine. We lso strongly reommen tht you ontinue to use only Genuine Brother Brn replement ink rtriges. Use or ttempte use of potentilly inomptile ink n/or rtriges in the Brother mhine my use mge to the mhine n/or my result in unstisftory print qulity. Our wrrnty overge oes not pply to ny prolem tht is use y the use of unuthorize thir prty ink n/or rtriges. To protet your investment n otin premium performne from the Brother mhine, we strongly reommen the use of Genuine Brother Supplies. The mhine will prepre the ink tue system for printing. This proess will tke pproximtely four minutes. Do not turn off the mhine. We reommen you perform the next step while witing. 6

7 4 Lo plin Letter/A4 pper Mke sure the first printe pge is Letter/A4 size. Pull the pper try (for MFC-J6720DW, pper try #, the upper try), ompletely out of the mhine. Gently press n slie the pper length guie to fit the pper size. Mke sure tht the tringulr mrks on the pper length guie lines up with the mrk for the pper size you re using. 2 Gently press n slie the pper sie guies to fit the pper size. Mke sure tht the tringulr mrk on the pper sie guie lines up with the mrk for the pper size you re using. e f Close the output pper try over. Fn the stk of pper well to voi pper jms n misfees. 2 Alwys mke sure tht the pper is not urle or wrinkle. Open the output pper try over. 7

8 g Gently put the pper into the pper try (for MFC-J6720DW, try #, the upper try). IMPORTANT Mke sure the pper is flt in the try. If the pper is pushe ginst the k of the try, it my use pper fee prolems. h Gently just the pper sie guies to fit the pper with oth hns. Mke sure tht the pper sie guies touh the sies of the pper. i Chek tht the pper is flt in the try n elow the mximum pper mrk. When you use Leger, Legl, Folio or A3 size pper, press the universl guie relese utton s you slie out the front of pper try #. When you lo ifferent pper size in try, you will nee to hnge the pper size setting in the mhine t the sme time. (See Pper Size n Type in hpter 2 of the Bsi User s Guie.) j Slowly push the pper try ompletely into the mhine. 8

9 k While holing the pper try in ple, pull out the pper support until it liks, n then unfol the pper support flp. 5 Chek the print qulity 2 If your mhine hs two pper trys, mke sure there is pper in try #, the upper try, when heking the print qulity. For printing n opying on speil print mei, open the mnul fee slot on the k of the mhine. Fee only one sheet t time. For more informtion, see Loing pper in the mnul fee slot in hpter 2 of the Bsi User s Guie. When the preprtion proess hs finishe, the Touhsreen shows Lo pper n press [OK]. Press OK. Chek the qulity of the four olor loks on the sheet (lk/yellow/yn/mgent). If ll lines re ler n visile, press Yes to finish the qulity hek n go to the next step. OK (MFC-J6720DW) For informtion out try #2 (the lower try), see Loing pper in pper try #2 in hpter 2 of the Bsi User s Guie. If lines re missing, press No n follow the steps on the Touhsreen. Poor 9

10 6 Set the te n time 7 Set the pper settings The Touhsreen isplys the te n time. You n lso the urrent te n time to eh fx you sen y setting your Sttion ID (see step 0). e Enter the lst two igits of the yer on the Touhsreen, n then press OK. Enter the two igits for the month on the Touhsreen, n then press OK. Enter the two igits for the y on the Touhsreen, n then press OK. Enter the time on the Touhsreen in 2-hour formt. Press Press OK. (e.g. Enter 3 for 203.) to yle AM n PM. You n hnge te, time, or lok type (2h or 24h) t ny time. For more informtion, see Setting the te n time in the Bsi User s Guie. For your mhine to proue the est print qulity n to fee the orret pper size, the pper type n size must e set to mth the pper in the try. For more informtion on the types n sizes of pper supporte, see Pper Size n Type in hpter 2 of the Bsi User s Guie. (For MFC-J6720DW) You n hnge the efult try tht the mhine will use for printing opies or reeive fxes (see Try use in Copy moe or Try use in Fx moe in hpter 2 of the Bsi User s Guie). (For MFC-J6720DW) When Try Setting ppers on the Touhsreen, press Try Setting to set the pper size n pper type. (For MFC-J6520DW) Press Pper Setting. Go to step. Press Try # to set pper size n pper type for try #, or press Try #2 to set pper size for try #2. Press the size n type of pper you re using. Press OK. 0

11 8 Choose your lnguge (if neee) Press (Settings). e Press All Settings. Press or to isply Initil Setup. Press Initil Setup. Press or to isply Lol Lnguge. Press Lol Lnguge. Press your lnguge. f Press.

12 9 Choose the orret Reeive Moe The orret Reeive Moe is etermine y the externl evies n telephone susrier servies (Voie Mil, Distintive Ring, et.) you hve (or will e using) on the sme line s the Brother mhine. For etils, see Using Reeive Moes in hpter 5 of the Bsi User s Guie. If you re not using this mhine for fxing, go to the next step. Will you e using Distintive Ring numer for reeiving fxes? Brother uses the term Distintive Ring ut telephone ompnies my hve other nmes for this servie suh s Custom Ringing, RingMster, Personlize Ring, Teen Ring, Ient-A-Cll, n Smrt Ring. See Distintive Ring in hpter 6 of the Bsi User s Guie for instrutions on setting up your mhine using this feture. Will you e using Voie Mil on the sme telephone line s your Brother mhine? If you hve Voie Mil on the sme telephone line s your Brother mhine, there is strong possiility tht Voie Mil n the Brother mhine will onflit with eh other when reeiving inoming lls. See Voie Mil in hpter 6 of the Bsi User s Guie for instrutions on setting up your mhine using this servie. Will you e using Telephone Answering Devie on the sme telephone line s your Brother mhine? Your externl telephone nswering evie (TAD) will utomtilly nswer every ll. Voie messges re store on the externl TAD n fx messges re printe. Choose Externl TAD s your Reeive Moe. See the instrutions elow. For itionl etils, see Conneting n externl TAD (telephone nswering evie) in hpter 6 of the Bsi User s Guie. Will you e using your Brother mhine on eite fx line? Your mhine utomtilly nswers every ll s fx. Choose Fx Only s your Reeive Moe. See the instrutions elow. Will you e using your Brother mhine on the sme line s your telephone? Do you wnt to reeive voie lls n fxes utomtilly? The Fx/Tel reeive moe is use when shring the Brother mhine n your telephone on the sme line. Choose Fx/Tel s your Reeive Moe. See the instrutions elow. For itionl informtion see Fx/Tel in hpter 5 of the Bsi User s Guie for instrutions on setting up n using this reeive moe. Importnt Note: You nnot reeive voie messges on either Voie Mil or n nswering mhine when hoosing the Fx/Tel moe. Do you expet to reeive very few fxes? Choose Mnul s your Reeive Moe. You ontrol the phone line n must nswer every ll yourself. See the instrutions elow. Press (Settings). e f Press All Settings. Press Fx. Press Setup Reeive. Press Reeive Moe. Press your preferre reeive moe. g Press. If the Reeive Moe option is not isplye, mke sure the Distintive Ring feture is set to Off. (See Turning off Distintive Ring in hpter 6 of the Bsi User s Guie.) 2

13 0 Set your Sttion ID Set your mhine s Sttion ID so tht the te n time pper on eh fx you sen. If you re not using this mhine for fxing, go to the next step. Press (Settings). e f g h Press All Settings. Press or to isply Initil Setup. Press Initil Setup. Press Sttion ID. Press Fx. Enter your fx numer (up to 20 igits) on the Touhsreen, n then press OK. Press Nme. Enter your nme (up to 20 hrters) using the Touhsreen, n then press OK. Press to yle etween lower se n upper se. Press to yle etween letters, numers n speil hrters. (The hrters ville my iffer epening on your ountry.) If you entere numer or hrter inorretly n wnt to hnge it, press or to move the ursor to the inorret one. Press n then enter the orret hrter. To enter spe, press Spe. Or, you n press to move the ursor. i Press. (USA only) The Telephone Consumer Protetion At of 99 mkes it unlwful for ny person to use omputer or eletroni evie to sen ny messge vi telephone fx mhine unless suh messges lerly ontin, in mrgin t the top or ottom of eh trnsmitte pge, or on the first pge of the trnsmission, the te n time it is sent n n ientifition of the usiness or other entity or other iniviul sening the messge n the telephone numer of the sening mhines or suh usiness, other entity or iniviul. Trnsmission Verifition Report Your Brother mhine is equippe with Trnsmission Verifition Report tht n e use s onfirmtion tht you sent fx. This report lists the nme or fx numer of the reeiving prty, the te, time, n urtion of the trnsmission, the numer of pges trnsmitte, n whether or not the trnsmission ws suessful. If you wnt to use the Fx Trnsmission Report feture, see Trnsmission Verifition Report in hpter 4 of the Bsi User s Guie. 2 Set Tone or Pulse iling moe (Cn only) Your mhine omes set for Tone iling servie. If you hve Pulse iling (rotry) servie, you nee to hnge the iling moe. Press (Settings). e Press All Settings. Press or to isply Initil Setup. Press Initil Setup. Press Tone/Pulse. Press Pulse (or Tone). f Press. 3

14 3 Set the telephone line omptiility (VoIP) 5 Set the Time Zone If you re onneting the mhine to VoIP servie (over the Internet), you nee to hnge the omptiility setting. If you re using n nlog telephone line, you n skip this step. Press (Settings). e Press All Settings. Press or to isply Initil Setup. Press Initil Setup. Press or to isply Comptiility. Press Comptiility. Press Bsi(for VoIP). f Press. 4 Automti Dylight Sving Time You n set the mhine to hnge utomtilly for Dylight Sving Time. It will reset itself forwr one hour in the spring n kwr one hour in the fll. Press (Settings). e f Press All Settings. Press or to isply Initil Setup. Press Initil Setup. Press Dte & Time. Press or to isply Auto Dylight. Press Auto Dylight. Press On (or Off). You n set the time zone for your lotion on the mhine. For exmple, the time zone for Estern Time in the USA n Cn is UTC-05:00. Pifi Time in the USA n Cn is UTC-08:00. Press (Settings). e f Press All Settings. Press or to isply Initil Setup. Press Initil Setup. Press Dte & Time. Press or to isply Time Zone. Press Time Zone. Enter your time zone. Press OK. g Press. Time Zone Stnr Time Hwii-Aleutin Time Zone UTC - 0:00 Alsk Time Zone UTC - 09:00 Pifi Time Zone UTC - 08:00 Mountin Time Zone UTC - 07:00 Centrl Time Zone UTC - 06:00 Estern Time Zone UTC - 05:00 Atlnti Time Zone UTC - 04:00 Chmorro Stnr Time Zone UTC + 0:00 g Press. 4

15 6 Choose your onnetion type These instlltion instrutions re for Winows XP Home, XP Professionl, XP Professionl x64 Eition, Winows Vist, Winows 7, Winows 8, n M OS X v0.6.8, 0.7.x, 0.8.x. If your omputer oes not hve CD-ROM rive, the supplie CD-ROM oes not ontin rivers for your operting system, or you wnt to ownlo mnuls n utilities, visit your moel pge t Some softwre pplitions inlue on the CD-ROM my not e ville s ownlo. For USB interfe le Winows, go to pge 6 Mintosh, go to pge 9 For Wire Network Winows, go to pge 22 Mintosh, go to pge 26 USB Wire Network Winows Mintosh Winows Mintosh For Wireless Network Winows, Mintosh n moile evies go to pge 29 Wireless Network 5

16 USB Winows For Winows USB interfe users (Winows XP Home/XP Professionl/Winows Vist /Winows 7/Winows 8) 7 Before you instll Clik Instll MFL-Pro Suite n lik Yes if you ept the liense greements. Follow the on-sreen instrutions. Mke sure tht your omputer is ON n you re logge on with Aministrtor rights. DO NOT onnet the USB le yet. If there re ny progrms running, lose them. The sreens my iffer epening on your operting system. The CD-ROM inlues Nune PperPort 2SE. This softwre supports Winows XP Home (SP3 or greter), XP Professionl (SP3 or greter), XP Professionl x64 Eition (SP2 or greter), Winows Vist (SP2 or greter), Winows 7 n Winows 8. Upte to the ltest Winows Servie Pk efore instlling MFL-Pro Suite. If the Winows Seurity sreen ppers, lik the hek ox n lik Instll to omplete the instlltion orretly. 8 Instll MFL-Pro Suite Choose Lol Connetion (USB), n then lik Next. Follow the on-sreen instrutions until the Plug in the USB le sreen ppers. Put the CD-ROM into your CD-ROM rive. If the moel nme sreen ppers, hoose your mhine. If the lnguge sreen ppers, hoose your lnguge. If the Brother sreen oes not pper utomtilly, go to Computer (My Computer). (For Winows 8: lik the (File Explorer) ion on the tskr, n then go to Computer.) Doule-lik the CD-ROM ion, n then oule-lik strt.exe. If the User Aount Control sreen ppers, lik Allow or Yes. 6

17 USB Winows 9 Connet the USB le Gently lose the snner over using the finger hols on eh sie. Lift the snner over until it loks seurely into the open position. Connet the USB le to the USB port mrke with symol. You will fin the USB port insie the mhine, s shown in the llout elow. e CAUTION Be reful not to pinh your fingers when you lose the snner over. Alwys use the finger hols provie on eh sie of the snner over when opening n losing it. The instlltion will ontinue utomtilly. The instlltion sreens pper one fter nother. DO NOT nel ny of the sreens uring the instlltion. It my tke few seons for ll sreens to pper. USB Winows Mintosh Crefully guie the USB le into the le hnnel n out the k of the mhine. Connet the le to your omputer. f g h i If the Environmentl Avie for Imging Equipment sreen ppers, lik Next. When the On-Line Registrtion sreen ppers, follow the on-sreen instrutions. Clik Next. If you o not wnt to set your mhine s the efult printer, ler the Set s Defult Printer hek ox, n then lik Next. When the Setup is Complete winow ppers, onfirm the settings, n then lik Next. IMPORTANT Mke sure tht the le oes not restrit the over from losing, or n error my our. 7

18 20 USB Finish n restrt Clik Finish to restrt your omputer. After restrting the omputer, you must log on with Aministrtor rights. Winows The following sreens will pper. When the Softwre Upte Setting sreen ppers, hoose the softwre upte setting you wnt n lik OK. When the Brother Prout Reserh n Support Progrm sreen ppers, selet your preferene n follow the on-sreen instrutions. If n error messge ppers uring the softwre instlltion, o one of the following: - Winows XP, Winows Vist n Winows 7 users: Run the Instlltion Dignostis lote in (Strt) > All Progrms > Brother > MFC-XXXX (where XXXX is your moel nme). - Winows 8 users: To run the Instlltion Dignostis, oule-lik (Brother Utilities) on the esktop, n then lik the rop-own list n selet your moel nme (if not lrey selete). Clik Tools in the left nvigtion r. Depening on your seurity settings, Winows Seurity or ntivirus softwre winow my pper when using the mhine or its softwre. Plese llow or permit the winow to ontinue. Internet ess is require for the softwre upte n the Brother Prout Reserh n Support Progrm. When you instll MFL-Pro Suite, Brother Help will lso e instlle utomtilly. Brother Help llows you to ess the Brother Solutions Center when you lik in the tsk try. Finish To instll optionl pplitions: Now go to Pge 43 The instlltion is now omplete. Winows 8 users: If the Brother mnuls inlue on the CD-ROM re in PDF formt, use Aoe Reer to open them. If Aoe Reer is instlle on your omputer ut you nnot open the files in Aoe Reer, hnge the file ssoition for PDF (see How to open PDF file in Aoe Reer (Winows 8) on pge 45). 8

19 USB Mintosh For Mintosh USB interfe users (M OS X v0.6.8, 0.7.x, 0.8.x) 7 Before you instll Connet the USB le to the USB port mrke with symol. You will fin the USB port insie the mhine, s shown in the llout elow. Mke sure your mhine is onnete to the power n your Mintosh is ON. You must e logge on with Aministrtor rights. For M OS X v0.6.0 to users, upgre to M OS X v x. 8 Connet the USB le DO NOT onnet the mhine to USB port on keyor or non-powere USB hu. Connet the mhine iretly to your Mintosh. Lift the snner over until it loks seurely into the open position. Crefully guie the USB le into the le hnnel n out the k of the mhine. Connet the le to your Mintosh. USB Winows Mintosh IMPORTANT Mke sure tht the le oes not restrit the over from losing, or n error my our. 9

20 USB Mintosh Gently lose the snner over using the finger hols on eh sie. e After the instlltion, the Brother softwre will serh for the Brother evie. This will tke few moments to omplete. Choose your mhine from the list, n then lik Next. CAUTION Be reful not to pinh your fingers when you lose the snner over. Alwys use the finger hols provie on eh sie of the snner over when opening n losing it. f g When the A Printer sreen ppers, lik A Printer. Choose your mhine from the list. Clik A n then lik Next. 9 Instll MFL-Pro Suite Put the CD-ROM into your CD-ROM rive. Doule-lik the Strt Here OSX ion to instll. If the moel nme sreen ppers, hoose your mhine. h When the support sreen ppers, follow the on-sreen instrutions if you wnt to ownlo Presto! PgeMnger. You n lso ownlo Presto! PgeMnger lter from the Brother Support sreen. Clik Next. When this sreen ppers, lik Close. Choose Lol Connetion (USB), n then lik Next. Follow the on-sreen instrutions. The instlltion of MFL-Pro Suite is now omplete. Go to step

21 USB Mintosh 20 Downlo n instll Presto! PgeMnger When Presto! PgeMnger is instlle, OCR pility is e to Brother ControlCenter2. You n esily sn, shre n orgnize photos n ouments using Presto! PgeMnger. On the Brother Support sreen, lik the Presto! PgeMnger ion to go to the Presto! PgeMnger ownlo site, n follow the on-sreen instrutions. Finish The instlltion is now omplete. USB Winows Mintosh 2

22 Wire Network Winows For Winows wire network interfe users (Winows XP Home/XP Professionl/Winows Vist /Winows 7/Winows 8) 7 Before you instll Mke sure tht your omputer is ON n you re logge on with Aministrtor rights. 8 Connet the network le Lift the snner over until it loks seurely into the open position. If there re ny progrms running, lose them. The sreens my iffer epening on your operting system. The CD-ROM inlues Nune PperPort 2SE. This softwre supports Winows XP Home (SP3 or greter), XP Professionl (SP3 or greter), XP Professionl x64 Eition (SP2 or greter), Winows Vist (SP2 or greter), Winows 7 n Winows 8. Upte to the ltest Winows Servie Pk efore instlling MFL-Pro Suite. If you hve previously set up your mhine for wireless network n then wnt to set it up on wire network, mke sure the mhine s Network I/F is set to Wire LAN. The wireless network interfe will eome intive with this setting. On your mhine, press (Settings). Press All Settings. Press or to isply Network. Press Network. Press or to isply Network I/F. Press Network I/F. Press Wire LAN. Press. Connet the network le to the Ethernet port mrke with symol. You will fin the Ethernet port insie the mhine, s shown in the llout elow. Remove the ornge protetive p efore onneting the le. 2 22

23 Wire Network Winows Crefully guie the network le into the le hnnel n out the k of the mhine. Connet the le to your network. 9 Instll MFL-Pro Suite Put the CD-ROM into your CD-ROM rive. If the moel nme sreen ppers, hoose your mhine. If the lnguge sreen ppers, hoose your lnguge. IMPORTANT Mke sure tht the le oes not restrit the over from losing, or n error my our. If oth the USB n the network les re eing use, guie oth les through the le hnnel with one on top of the other. Gently lose the snner over using the finger hols on eh sie. If the Brother sreen oes not pper utomtilly, go to Computer (My Computer). (For Winows 8: lik the (File Explorer) ion on the tskr, n then go to Computer.) Doule-lik the CD-ROM ion, n then oule-lik strt.exe. If the User Aount Control sreen ppers, lik Allow or Yes. Clik Instll MFL-Pro Suite n lik Yes if you ept the liense greements. Follow the on-sreen instrutions. Choose Wire Network Connetion (Ethernet), n then lik Next. Wire Network Winows Mintosh CAUTION Be reful not to pinh your fingers when you lose the snner over. Alwys use the finger hols provie on eh sie of the snner over when opening n losing it. 23

24 Wire Network When the Firewll/AntiVirus etete sreen ppers, hoose Chnge the Firewll port settings to enle network onnetion n ontinue with the instlltion. (Reommene), n then lik Next. If you re not using the Winows Firewll, see the instrutions provie with your firewll softwre for informtion on how to the following network ports. For network snning, UDP port For network PC-Fx reeiving, UDP port If you still hve troule with your network onnetion, UDP ports 37 n 6. If there is more thn one mhine onnete to the network, hoose your mhine from the list, n then lik Next. This winow will not pper if there is only one mhine onnete to the network, the mhine will e hosen utomtilly. e f g Winows The instlltion of the Brother rivers will utomtilly strt. The instlltion sreens pper one fter nother. DO NOT nel ny of the sreens uring the instlltion. It my tke few seons for ll sreens to pper. If the Winows Seurity sreen ppers, lik the hek ox n lik Instll to omplete the instlltion orretly. h i If the Environmentl Avie for Imging Equipment sreen ppers, lik Next. When the On-Line Registrtion sreen ppers, follow the on-sreen instrutions. Clik Next. If you o not wnt to set your mhine s the efult printer, ler the Set s Defult Printer hek ox, n then lik Next. When the Setup is Complete winow ppers, onfirm the settings, n then lik Next. If your mhine is not foun over the network, onfirm your settings y following the on-sreen instrutions. 24

25 20 Wire Network Finish n restrt Clik Finish to restrt your omputer. After restrting the omputer, you must log on with Aministrtor rights. If n error messge ppers uring the softwre instlltion, o one of the following: - Winows XP, Winows Vist n Winows 7 users: Run the Instlltion Dignostis lote in (Strt) > All Progrms > Brother > MFC-XXXX LAN (where XXXX is your moel nme). - Winows 8 users: To run the Instlltion Dignostis, oule-lik (Brother Utilities) on the esktop, n then lik the rop-own list n selet your moel nme (if not lrey selete). Clik Tools in the left nvigtion r. Depening on your seurity settings, Winows Seurity or ntivirus softwre winow my pper when using the mhine or its softwre. Plese llow or permit the winow to ontinue. The following sreens will pper. When the Softwre Upte Setting sreen ppers, hoose the softwre upte setting you wnt n lik OK. When the Brother Prout Reserh n Support Progrm sreen ppers, selet your preferene n follow the on-sreen instrutions. Internet ess is require for the softwre upte n the Brother Prout Reserh n Support Progrm. When you instll MFL-Pro Suite, Brother Help will lso e instlle utomtilly. Brother Help llows you to ess the Brother Solutions Center when you lik in the tsk try. 2 Winows Instll MFL-Pro Suite on itionl omputers (if neee) If you wnt to use your mhine with multiple omputers on the network, instll MFL-Pro Suite on eh omputer. Go to step 9 on pge 23. Also see step 7 on pge 22 efore you instll. Network liense (Winows ) This prout inlues PC liense for up to two users. This liense supports the instlltion of the MFL-Pro Suite inluing Nune PperPort 2SE on up to two PCs on the network. If you wnt to use more thn two PCs with Nune PperPort 2SE instlle, plese purhse the Brother NL-5 pk whih is multiple PC liense greement pk for up to five itionl users. To purhse the NL-5 pk, ontt your uthorize Brother eler or ontt Brother ustomer servie. Finish To instll optionl pplitions: Now go to Pge 43 The instlltion is now omplete. To use moile evie with your Brother mhine, see the User s Guie y visiting the Brother Solutions Center t n liking Mnuls on your moel s pge. Winows 8 users: If the Brother mnuls inlue on the CD-ROM re in PDF formt, use Aoe Reer to open them. If Aoe Reer is instlle on your omputer ut you nnot open the files in Aoe Reer, hnge the file ssoition for PDF (see How to open PDF file in Aoe Reer (Winows 8) on pge 45). 25 Wire Network Winows Mintosh

26 Wire Network Mintosh For Mintosh wire network interfe users (M OS X v0.6.8, 0.7.x, 0.8.x) 7 Before you instll Mke sure your mhine is onnete to the power n your Mintosh is ON. You must e logge on with Aministrtor rights. For M OS X v0.6.0 to users, upgre to M OS X v x. If you hve previously set up your mhine for wireless network n then wnt to set it up on wire network, mke sure the mhine s Network I/F is set to Wire LAN. The wireless network interfe will eome intive with this setting. On your mhine, press (Settings). Press All Settings. Press or to isply Network. Press Network. Press or to isply Network I/F. Press Network I/F. Press Wire LAN. Press. Connet the network le to the Ethernet port mrke with symol. You will fin the Ethernet port insie the mhine, s shown in the llout elow. Remove the ornge protetive p efore onneting the le. 2 Crefully guie the network le into the le hnnel n out the k of the mhine. Connet the le to your network. 8 Connet the network le Lift the snner over until it loks seurely into the open position. IMPORTANT Mke sure tht the le oes not restrit the over from losing, or n error my our. If oth the USB n the network les re eing use, guie oth les through the le hnnel with one on top of the other. 26

27 Wire Network Mintosh Gently lose the snner over using the finger hols on eh sie. e After the instlltion, the Brother softwre will serh for the Brother evie. This will tke few moments to omplete. Choose your mhine from the list, n then lik Next. CAUTION Be reful not to pinh your fingers when you lose the snner over. Alwys use the finger hols provie on eh sie of the snner over when opening n losing it. 9 Instll MFL-Pro Suite If your mhine is not foun over the network, onfirm your network settings. You n fin your mhine s MAC Aress (Ethernet Aress) n IP Aress y printing out the Network Configurtion Report. See Print the Network Configurtion Report in the Softwre n Network User s Guie. If the Setup Network Sn to nme sreen ppers, follow the instrutions elow. Put the CD-ROM into your CD-ROM rive. Doule-lik the Strt Here OSX ion to instll. If the moel nme sreen ppers, hoose your mhine. Choose Wire Network Connetion (Ethernet), n then lik Next. Follow the on-sreen instrutions. f ) Enter nme for your Mintosh (up to 5 hrters long). 2) Clik Next. Go to f. The nme you enter will pper on the mhine s Touhsreen when you press Sn n hoose sn option. For etils, see Configure Network Snning for Mintosh in the Softwre n Network User s Guie. When the A Printer sreen ppers, lik A Printer. Wire Network Winows Mintosh 27

28 Wire Network Mintosh g Choose your mhine from the list. Clik A n then lik Next. 20 Downlo n instll Presto! PgeMnger (OS X v0.8.x) Selet Brother MFC-XXXX CUPS (where XXXX is your moel nme) river from the Use pop-up menu. When Presto! PgeMnger is instlle, OCR pility is e to Brother ControlCenter2. You n esily sn, shre n orgnize photos n ouments using Presto! PgeMnger. On the Brother Support sreen, lik the Presto! PgeMnger ion to go to the Presto! PgeMnger ownlo site, n follow the on-sreen instrutions. h When the support sreen ppers, follow the on-sreen instrutions if you wnt to ownlo Presto! PgeMnger. You n lso ownlo Presto! PgeMnger lter from the Brother Support sreen. Clik Next. When this sreen ppers, lik Close. 2 Instll MFL-Pro Suite on itionl omputers (if neee) If you wnt to use your mhine with multiple omputers on the network, instll MFL-Pro Suite on eh omputer. Go to step 9 on pge 27. Also see step 7 on pge 26 efore you instll. The instlltion of MFL-Pro Suite is now omplete. Go to step 20. Finish The instlltion is now omplete. To use moile evie with your Brother mhine, see the User s Guie y visiting the Brother Solutions Center t n liking Mnuls on your moel s pge. 28

29 For Wireless Network Users For wireless network interfe users 7 Before you egin First you must onfigure the wireless network settings of your mhine to ommunite with your ess point/router. After the mhine is onfigure to ommunite with your ess point/router, omputers on your network will hve ess to the mhine. To use the mhine from these omputers, you will nee to instll the rivers n softwre. The following steps will guie you through the onfigurtion n instlltion proess. To hieve optimum results with norml everyy oument printing, ple the Brother mhine s lose to the network ess point/router s possile with miniml ostrutions. Lrge ojets n wlls etween the two evies s well s interferene from other eletroni evies n ffet the t trnsfer spee of your ouments. Due to these ftors, wireless my not e the est metho of onnetion for ll types of ouments n pplitions. If you re printing lrge files, suh s multi-pge ouments with mixe text n lrge grphis, you my wnt to onsier hoosing wire Ethernet for fster t trnsfer or USB for the fstest throughput spee. Although your Brother mhine n e use in oth wire n wireless network, only one of the onnetion methos n e use t time. If you hve previously onfigure the wireless settings of the mhine, you must reset the network settings efore you n onfigure the wireless settings gin. On your mhine, press (Settings). Press All Settings. Press or to isply Network. Press Network. Press or to isply Network Reset. Press Network Reset. Press Yes to ept. Hol own Yes for two seons to onfirm. The following instrutions re for infrstruture moe (onnete to omputer through n ess point/router). Infrstruture Moe Aess point/router Wireless network mhine (your mhine) onnete to the ess point/router Wireless-ple omputer onnete to the ess point/router Wire omputer onnete to the ess point/router e Moile evie onnete to the ess point/router Plese mke sure the wireless network settings of the mhine mth the ess point/router. To set up your mhine in A-ho moe, see Connete to Wireless Computer without Wireless LAN Aess Point Router in the Network (A-Ho Moe) in the Softwre n Network User s Guie on the CD-ROM. To view the Softwre n Network User s Guie: Turn on your omputer. Insert the CD-ROM into your CD-ROM rive. For Winows : 2 Choose your moel n the lnguge. The CD-ROM top menu will pper. 3 Clik User s Guies, n then lik PDF/HTML ouments. 4 Clik Softwre n Network User s Guie. For Mintosh: 2 Doule-lik User s Guies. Choose your moel n the lnguge. 3 Clik User s Guies, n then lik Softwre n Network User s Guie. 29 Wireless Network

30 For Wireless Network Users 8 Choose your wireless setup metho The following instrutions will offer three methos for setting up your Brother mhine on wireless network. Choose the metho you prefer for your environment. Metho is the reommene wy to onnet (Winows or Mintosh). Setup using the CD-ROM (Winows n Mintosh) We reommen using omputer wirelessly onnete to your network for this metho. A USB le might e neee in some ses. Now go to pge 32 30

31 For Wireless Network Users For methos n, strt your wireless setup y pressing the Wi-Fi utton on the Touhsreen. Mnul setup from the ontrol pnel using the Setup Wizr (Winows, Mintosh n moile evies) If your wireless ess point/router oes not support WPS (Wi-Fi Protete Setup ) or AOSS, write own the wireless network settings of your wireless ess point/router in the re elow. If you nee ssistne uring setup n wnt to ontt Brother Customer Servie, mke sure you hve your SSID (Network Nme) n Network Key rey. We nnot ssist you in loting this informtion. Item Reor the urrent wireless network settings SSID (Network Nme) Network Key* * The Network Key my lso e esrie s the Psswor, Seurity Key, or Enryption Key. If you o not know this informtion (SSID n Network Key), you nnot ontinue the wireless setup. How n I fin this informtion? ) Chek the oumenttion provie with your wireless ess point/router. 2) The initil SSID oul e the mnufturer s nme or the moel nme. 3) If you o not know the seurity informtion, plese onsult the router mnufturer, your system ministrtor, or your Internet provier. Now go to pge 33 One-push setup using WPS or AOSS (Winows, Mintosh n moile evies) Use this metho if your wireless ess point/router supports utomti wireless (one-push) setup (WPS or AOSS ). Now go to pge 35 Wireless Network 3

32 For Wireless Network Users 9 Setup using the CD-ROM (Winows n Mintosh) For Mintosh Users: Put the CD-ROM into your CD-ROM rive n oule-lik Strt Here OSX. Selet Wireless Network Connetion n follow the Wireless Devie Setup instrutions on your omputer sreen. When setup is omplete, go to step 2-e on pge 4. When the Firewll/AntiVirus etete sreen ppers, hoose Chnge the Firewll port settings to enle network onnetion n ontinue with the instlltion. (Reommene), n then lik Next. For Winows Users: Put the CD-ROM into your CD-ROM rive. If the moel nme sreen ppers, hoose your mhine. If the lnguge sreen ppers, hoose your lnguge. If the Brother sreen oes not pper utomtilly, go to Computer (My Computer). (For Winows 8: lik the (File Explorer) ion on the tskr, n then go to Computer.) Doule-lik the CD-ROM ion, n then oule-lik strt.exe. If the User Aount Control sreen ppers, lik Allow or Yes. Clik Instll MFL-Pro Suite n lik Yes if you ept the liense greements. Follow the on-sreen instrutions. e f If you re not using the Winows Firewll, see the instrutions provie with your firewll softwre for informtion on how to the following network ports. For network snning, UDP port For network PC-Fx reeiving, UDP port If you still hve troule with your network onnetion, UDP ports 37 n 6. Follow the on-sreen instrutions to set up the Brother mhine. Your mhine will now try to onnet to your wireless network. It my tke few minutes. If the onnetion file, hek the error oe on the printe report (or on the sreen), n refer to Trouleshooting on pge 36. Wireless setup is now omplete. The Wi-Fi LED on the ontrol pnel lights up, initing tht the mhine s Network I/F is set to WLAN. To instll MFL-Pro Suite For Winows users: Choose Wireless Network Connetion, n then lik Next. Now go to Step 2-e on pge 39 32

33 For Wireless Network Users 9 Mnul setup from the ontrol pnel using the Setup Wizr (Winows, Mintosh n moile evies) Press. Press Setup Wizr. You must hve the wireless settings you wrote own for your network in step 8- on pge 3 efore you proee. When Swith Network interfe to wireless? is isplye, press Yes to ept. This will strt the wireless setup wizr. To nel, press No. The mhine will serh for ville SSIDs. It will tke severl seons to isply list of ville SSIDs. If list of SSIDs is isplye, press or to hoose the SSID you wrote own in step 8- on pge 3. Press OK. If the wireless ess point/router of the selete SSID supports WPS n the mhine sks to use WPS, go to. If the mhine sks you to enter Network Key, go to. Otherwise, go to e. If the list is lnk, hek tht the wireless ess point/router hs power n is rosting the SSID. Move your mhine loser to the wireless ess point/router n try strting from gin. If your ess point is set to not rost the SSID, you will hve to mnully the SSID nme. For more informtion, see Configure Your Wireless Network When the SSID Is Not Brost in the Softwre n Network User s Guie. e Press Yes to onnet your mhine using WPS. (If you hoose No (Mnul) to ontinue mnul onfigurtion, go to to enter Network Key.) When the Touhsreen instruts you to strt WPS, press the WPS utton on your wireless ess point/router, n then press Next to proee. Go to e. Enter the Network Key you wrote own in step 8- on pge 3 using the Touhsreen. Press to yle etween lower se n upper se. Press to yle etween letters, numers n speil hrters. (The hrters ville my iffer epening on your ountry.) To move the ursor to the left or right, press or. (For more informtion, see Entering Text on pge 44.) Press OK when you hve entere ll the hrters, then press Yes to pply your settings. Your mhine will now try to onnet to your wireless network. It my tke few minutes. Press OK. If the onnetion file, hek the error oe on the printe report n refer to Trouleshooting on pge 36. Wireless setup is now omplete. The Wi-Fi LED on the ontrol pnel lights up, initing tht the mhine s Network I/F is set to WLAN. Wireless Network 33

34 For Wireless Network Users For moile evie users: Connet your moile evie to wireless ess point/router using Wi-Fi onnetion. Downlo n instll Brother iprint&sn (Anroi /ios/winows Phone) from your moile evie s pplition ownlo site. You n lso use AirPrint (ios) with this mhine. To ownlo the User s Guie for the pplition you re using (Brother iprint&sn/airprint), visit the Brother Solutions Center n lik Mnuls on your moel s pge. Now go to To instll MFL-Pro Suite, ontinue to step 20. For Winows users: Now go to Pge 38 For Mintosh users: Now go to Pge 4 34

35 For Wireless Network Users 9 One-push setup using WPS or AOSS (Winows, Mintosh n moile evies) Confirm your wireless ess point/router hs the WPS or AOSS symol s shown elow. Ple the Brother mhine within rnge of your WPS or AOSS ess point/router. The rnge my iffer epening on your environment. Refer to the instrutions provie with your ess point/router. For moile evie users: Connet your moile evie to wireless ess point/router using Wi-Fi onnetion. Downlo n instll Brother iprint&sn (Anroi /ios/winows Phone) from your moile evie s pplition ownlo site. You n lso use AirPrint (ios) with this mhine. To ownlo the User s Guie for the pplition you re using (Brother iprint&sn/airprint), visit the Brother Solutions Center n lik Mnuls on your moel s pge. Now go to Press. Press WPS/AOSS. To instll MFL-Pro Suite, ontinue to step 20. When Swith Network interfe to wireless? is isplye, press Yes to ept. This will strt the wireless setup wizr. To nel, press No. If your wireless ess point/router supports WPS n you wnt to onfigure your mhine using the PIN (Personl Ientifition Numer) Metho, see Configure Your Wireless Network Using the PIN Metho of Wi-Fi Protete Setup (WPS) in the Softwre n Network User s Guie. When the Touhsreen instruts you to strt WPS or AOSS, press the WPS or AOSS utton on your wireless ess point/router (for more informtion, see the instrutions provie with your wireless ess point/router), n then press OK on your mhine. For Winows users: Now go to Pge 38 For Mintosh users: Now go to Pge 4 This feture will utomtilly etet whih moe (WPS or AOSS ) your wireless ess point/router uses to onfigure your mhine. Press OK. If the onnetion file, hek the error oe on the printe report n refer to Trouleshooting on pge 36. Wireless setup is now omplete. The Wi-Fi LED on the ontrol pnel lights up, initing tht the mhine s Network I/F is set to WLAN. 35 Wireless Network

36 For Wireless Network Users Trouleshooting If you nee ssistne uring setup n wnt to ontt Brother Customer Servie, mke sure you hve your SSID (Network Nme) n Network Key rey. We nnot ssist you in loting this informtion. How n I fin the wireless seurity informtion (SSID n Network Key*) ) Chek the oumenttion provie with your wireless ess point/router. 2) The initil SSID oul e the mnufturer s nme or the moel nme. 3) If you o not know the seurity informtion, plese onsult the router mnufturer, your system ministrtor, or your Internet provier. * The Network Key my lso e esrie s the Psswor, Seurity Key or Enryption Key. Wireless LAN report If the wireless LAN report tht printe shows tht the onnetion file, hek the error oe on the printe report n refer to the following instrutions. Error oe Reommene Solutions The wireless setting is not tivte, turn the wireless setting to ON. - If network le is onnete to your mhine, isonnet it n turn the wireless setting of your mhine to ON. TS-0 On your mhine, press (Settings). Press All Settings. Press or to isply Network. Press Network. Press or to isply Network I/F. Press Network I/F. Press WLAN. Press. The wireless ess point/router nnot e etete.. Chek the following 4 points. TS-02 - Mke sure tht the wireless ess point/router is powere on. - Move your mhine to n ostrution-free re, or loser to the wireless ess point/router. - Temporrily ple your mhine within out 3.3 feet (one meter) from the wireless ess point when you re onfiguring the wireless settings. - If your wireless ess point/router is using MAC ress filtering, onfirm the MAC ress of the Brother mhine is llowe in the filter. 2. If you mnully entere the SSID n seurity informtion (SSID/uthentition metho/enryption metho/network Key), the informtion my e inorret. Reonfirm the SSID n seurity informtion n re-enter the orret informtion s neessry. See How n I fin the wireless seurity informtion (SSID n Network Key*) on pge 36 to onfirm. 36

37 For Wireless Network Users The Authentition/Enryption methos use y the selete wireless ess point/router re not supporte y your mhine. For infrstruture moe, hnge the uthentition n enryption methos of the wireless ess point/router. Your mhine supports the following uthentition methos: TS-04 Authentition metho Enryption metho WPA-Personl TKIP AES WPA2-Personl AES Open WEP None (without enryption) Shre key WEP If your prolem is not solve, the SSID or network settings you entere my e inorret. Reonfirm the wireless network settings. See How n I fin the wireless seurity informtion (SSID n Network Key*) on pge 36 to onfirm. For -ho moe, hnge the uthentition n enryption methos of your omputer for the wireless setting. Your mhine supports Open uthentition metho only, with optionl WEP enryption. The seurity informtion (SSID/Network Key) is inorret. TS-05 Reonfirm the SSID n seurity informtion (Network Key). See How n I fin the wireless seurity informtion (SSID n Network Key*) on pge 36 to onfirm. If your router uses WEP enryption, enter the key use s the first WEP key. Your Brother mhine supports the use of the first WEP key only. The wireless seurity informtion (Authentition metho/enryption metho/network Key) is inorret. TS-06 Reonfirm the wireless seurity informtion (Authentition metho/enryption metho/ Network Key) in the tle of TS-04. See How n I fin the wireless seurity informtion (SSID n Network Key*) on pge 36 to onfirm. If your router uses WEP enryption, enter the key use s the first WEP key. Your Brother mhine supports the use of the first WEP key only. The mhine nnot etet wireless ess point/router tht hs WPS or AOSS enle. TS-07 If you woul like to onfigure your wireless settings using WPS or AOSS, you must operte oth your mhine n the wireless ess point/router. Confirm your wireless ess point/router supports WPS or AOSS n try strting gin. If you o not know how to operte your wireless ess point/router using WPS or AOSS see the oumenttion provie with your wireless ess point/router, sk the mnufturer of your wireless ess point/router or sk your network ministrtor. TS-08 Two or more wireless ess points tht hve WPS or AOSS enle re etete. - Confirm tht only one wireless ess point/router within rnge hs the WPS or AOSS metho tive n try gin. - Try strting gin fter few minutes in orer to voi interferene from other ess points. Wireless Network 37

38 Wireless Network Winows Instll the rivers n softwre (Winows XP Home/XP Professionl/Winows Vist /Winows 7/Winows 8) 20 Before you instll Clik Instll MFL-Pro Suite n lik Yes if you ept the liense greements. Follow the on-sreen instrutions. Mke sure tht your omputer is ON n you re logge on with Aministrtor rights. If there re ny progrms running, lose them. The sreens my iffer epening on your operting system. The CD-ROM inlues Nune PperPort 2SE. This softwre supports Winows XP Home (SP3 or greter), XP Professionl (SP3 or greter), XP Professionl x64 Eition (SP2 or greter), Winows Vist (SP2 or greter), Winows 7 n Winows 8. Upte to the ltest Winows Servie Pk efore instlling MFL-Pro Suite. Choose Wireless Network Connetion, n then lik Next. 2 Instll MFL-Pro Suite Put the CD-ROM into your CD-ROM rive. If the moel nme sreen ppers, hoose your mhine. If the lnguge sreen ppers, hoose your lnguge. If the Brother sreen oes not pper utomtilly, go to Computer (My Computer). (For Winows 8: lik the (File Explorer) ion on the tskr, n then go to Computer.) Doule-lik the CD-ROM ion, n then oule-lik strt.exe. If the User Aount Control sreen ppers, lik Allow or Yes. When the Firewll/AntiVirus etete sreen ppers, hoose Chnge the Firewll port settings to enle network onnetion n ontinue with the instlltion. (Reommene), n then lik Next. If you re not using the Winows Firewll, see the instrutions provie with your firewll softwre for informtion on how to the following network ports. For network snning, UDP port For network PC-Fx reeiving, UDP port If you still hve troule with your network onnetion, UDP ports 37 n 6. 38