1 Single-Core PVC 1X...................... 1: Single-Core PVC/PVC 1Y.................. 1: Flat Twin & Flat Three Core PVC /Y........ 1: Multicore XLPE/LSF/SWA/LSF BS Control Cable............................. 1: Single-Core XLPE/PVC...................... 1: Single-Core XLPE/PVC/AWA/PVC Power Cable.... 1:1 Multicore XLPE/PVC/SWA/PVC Power Cable...... 1: Single-Core LSF 1B..................... 1: Single-Core XLPE/LSF 1B................. 1:0 Single-Core XLPE/LSF/AWA/LSF Power Cable..... 1: Multicore XLPE/LSF/SWA/LSF Power & Control Cable............................ 1: Single-Core XLPE/LSF/AWA/LSF kv Power Cable............................. 1: Three Core XLPE/LSF/SWA/LSF kv Power Cable............................. 1:0 BS Fire Resistant Cable................ 1: Fire Resistant Armoured Power Cable.......... 1: Single-Core XLPE/PVC/AWA/PVC Power Cable.... 1: Three Core XLPE/PVC/SWA/PVC Power Cable..... 1:0 /./ kv PE/PVC Airfield Lighting Cable...... 1: Flat Twin & Flat Three Core LSF /B....... 1: Solar Cables for PV Applications.............. 1: Technical Information...................... 1:
1 Single-Core PVC 1X 0/0 V Application PVC insulated only cable for fixed wiring purposes. Used in trunking or conduit, or may be surface mounted when used for earthing. 1 1 Specifications In accordance with BS00 and Cenelec Harmonised codes - H0V-U (solid conductor) H0V-R (stranded conductor) s: Solid Class 1 or Stranded Class copper conductors to BS EN 0 Insulation: PVC Insulation Type TI.1 to BS EN 0- Flame retardant to BS EN 0-1- Normal colours available: green/yellow, blue, black, brown and grey Other colours available if required Temperature Rating: 0 C maximum conductor operating temperature Voltage Rating: 0/0 V 0 01
Anixter Number Cenelec Code Area -## = colour, -0 = black, -0 = blue, -0 = brown, -0 = grey, -0 = green/yellow. Other colours available upon request. All dimensions are nominal unless otherwise stated. For further technical information see page 1:. For conductor short-circuit ratings see page 0:. Class Insulation Thickness Single-Core PVC 1X 0/0 V Maximum O/D Approx Weight A-A01-00-## H0V-U1 1. 1 0.. 1 A-A0-00-## H0V-R1 1. 0.. A-A01-00-## H0V-U1. 1 0.. 1 A-A-00-## H0V-R1. 0..0 1 A-A0-000-## H0V-R1 0.. 1 A-A0-000-## H0V-R1 0.. 1 A-A0-00-## H0V-R1 1.0. 1 A-A0-00-## H0V-R1 1.0. 0 A-A0-00-## H0V-R1 1.. 0 A-A0-00-## H0V-R1 1.. 0 0 A-A-000-## H0V-R1 0 1. 1. 0 A-A-000-## H0V-R1 0 1.. 0 0 A-A-00-## H0V-R1 1..1 0 0 A-A-0-## H0V-R1 1.. 0 A-A-00-## H0V-R1 0 1. 0. 0 A-A-0-## H0V-R1.0. 00 0 A-A1-00-## H0V-R1 0.. 0 0 A-A1-000-## H0V-R1 00.. 0 0 A-A1-000-## H0V-R1 00.. 0 A-A1-000-## H0V-R1 00.. 0 0 A-A1-00-## H0V-R1 0. 1.1 00 0 kg/km Min Bending Radius (fixed bend) 1 1 1 0 01
1 Single-Core PVC/PVC 1Y 00/00 V Application PVC insulated and sheathed cable for fixed wiring purposes. Not suitable for direct burial. 1 Specifications In accordance with BS00 s: Solid Class 1 or stranded Class copper conductors to BS EN 0 Insulation: PVC insulation Type TI.1 to BS EN 0- Sheath: PVC sheath Type to BS Flame retardant to BS EN 0-1- Normal colours available. (See 1X page 1:) Temperature Rating: 0 C maximum conductor operating temperature Voltage Rating: 00/00 V 1 0 01
Anixter Number Area Class Single-Core PVC/PVC 1Y 00/00 V -##-## = colour, -0 = black, -0 = blue, -0 = brown, -0 = grey, -0 = green/yellow. e.g. A-C0-00-0-0 = black insulation, black sheath. A-C0-00-0-0 = brown insulation, black sheath. Other colours available upon request. For further technical information see page 1:. For conductor short-circuit ratings see page 0:. Insulation Thickness Minimum O/D Maximum O/D Approx Weight A-C01-00-##-## 1.0 1 0... A-C01-00-##-## 1. 1 0... A-C01-00-##-##. 1 0... A-C0-000-##-## 0... 1 A-C0-000-##-## 0..0. A-C0-00-##-## 1.0.. A-C0-00-##-## 1.0.. 0 A-C0-00-##-## 1..0 1. 0 0 A-C0-00-##-## 1..0 1. 0 0 kg/km Minimum Bending Radius (fixed bend) 1 1 1 0 01
1 Flat Twin and Flat Three Core PVC Y and Y Insulated and sheathed with uninsulated circuit protective conductor as option Application PVC insulated and sheathed cable for installation clipped to flat surfaces, or embedded in plaster, etc. For domestic and industrial wiring. 1 1 Specifications In accordance with BS00 s: Solid Class 1 (up to. ) and stranded Class (above. ) copper conductors to BS EN 0 Insulation: PVC insulation Type TI.1 to BS EN 0- Core Identification: core - brown, blue core - brown, black, grey PVC sheath Type to BS Position of Protective : Twin - centrally placed between brown and blue cores Three core - centrally placed between black and grey cores Flame retardant to BS EN 0-1- Temperature Rating: 0 C maximum conductor operating temperature Voltage Rating: 00/00 V 0 01
Anixter Number Y - Flat Twin Area Flat Twin and Flat Three Core PVC Y and Y Insulated and sheathed with uninsulated circuit protective conductor as option Class Insulation Thickness Minimum O/D Maximum O/D Approx Weight Y-00 1.0 1 0..0 x.. x. Y-00 1. 1 0.. x.0. x. 0 Y-00. 1 0.. x.. x. 0 Y-000 0.. x.. x. 0 0 Y-000 0.. x..0 x 1.0 0 0 Y-00 1.0. x 1.0. x.0 0 Y-00 1.0.0 x..0 x. 0 Y - Flat Three Core Y-00 1.0 1 0..0 x.. x. 0 Y-00 1. 1 0.. x.. x. 0 0 Y-00. 1 0.. x.. x 1. 0 0 Y-000 0.. x 1.. x. 0 0 Y-000 0.. x.0.0 x.0 00 0 Y-00 1.0. x.0. x. 0 0 Y-00 1.0.0 x.0.0 x. 00 0 Anixter Number Area Class Insulation Thickness Minimum O/D Maximum O/D Nom earth Area kg/km Approx Weight kg/km Y - Flat Twin + Earth Y-00 1.0 1 0..0 x.. x. 1.0 Y-00 1. 1 0.. x.. x. 1.0 Y-00. 1 0.. x.. x. 1. 0 Y-000 0.. x.. x 1.0 1. 0 Y-000 0.. x 1..0 x.0. 0 0 Y-00 1.0. x.. x.0 0 0 Y-00 1.0.0 x.0.0 x. 0 0 Y - Flat Three Core + Earth Y-00 1.0 1 0..0 x.0. x.0 1.0 0 Y-00 1. 1 0.. x.. x 1. 1.0 1 0 Y-00. 1 0.. x 1.. x. 1.0 0 0 Y-000 0.. x.. x.0 1. 0 Y-000 0.. x..0 x 0.0. 0 0 Y-00 1.0. x 1.0. x. 0 0 Y-00 1.0.0 x..0 x. 0 0 For further technical information see page 1:. For conductor short-circuit ratings see page 0:. Minimum Bending Radius (fixed bend) Min Bending Radius (fixed bend) 1 1 1 0 01
1 Multicore XLPE/LSF/SWA/LSF Control Cable 00/00 V Application Sheathed, multicore control cable. Especially for use in areas where fire would create dense smoke and toxic fumes causing a major threat to life and equipment. 1 1 Specifications In accordance with BS s: Stranded Class copper conductors to BS EN 0 Insulation: XLPE insulation Type GP to BS Core Identification: Number printed in black ink on white XLPE insulated cores Inner Sheath: LSF inner sheath Type LTS1 to BS Mild galvanised steel wires to BS EN -1 Outer Sheath: Black LSF outer sheath Type LTS1 to BS Flame retardant to BS EN 0-- & IEC0-- Cat. C as a minimum Temperature Rating: 0 C maximum conductor operating temperature Voltage Rating: 00/00 V 0 01
Anixter Number Number of Cores Area Multicore XLPE/LSF/SWA/LSF Control Cable 00/00 V Insulation Thickness For further technical information see page 1:. For conductor short-circuit ratings refer to page 0:. For armour short-circuit ratings refer to page 0:. Diam under Armour Armour Wire Size O/D Approx Weight A-AU-00N 1. 0.. 0. 1.1 0 A-AV-00N 1. 0.. 0. 1. 0 0 A-AX-00N 1. 0.. 0. 1. 0 0 BS-C-00N 1. 0.. 0.. 0 0 A-O-C00 1. 0.. 0.. 0 0 A-O-C0 1. 0. 1. 1.. 00 A-O-C01 1 1. 0. 1. 1.. 0 A-O-C0 1. 0.. 1.. 0 0 A-O-C0 1. 0. 0.1 1.. 0 A-O-C0 1. 0.. 1..0 0 0 A-AU-00N. 0..0 0. 1. 0 0 A-AV-00N. 0.. 0..1 00 0 A-AX-00N. 0.. 0..0 0 0 BS-C-00N. 0.. 0..1 0 A-P-C00. 0. 1. 1..1 00 1 A-P-C0. 0.. 1. 1. 0 A-P-C01 1. 0.. 1.. 0 0 A-P-C0. 0. 0.0 1.. 0 0 A-P-C0. 0.. 1. 0. 0 0 A-P-C0. 0..0 1.. 0 0 kg/km Min Bending Radius (fixed bend) 1 1 1 0 01
1 Single-Core XLPE/PVC 00/00 V Application XLPE insulated and PVC sheathed cable for fixed installation. Not suitable for direct burial. 1 Specifications In accordance with BS s: Stranded Class copper conductors to BS EN 0 Insulation: XLPE insulation Type GP to BS Sheath: PVC sheath Type to BS Flame retardant to BS EN 0-1- Normal colours available. (See 1X page 1:) Temperature Rating: 0 C maximum conductor operating temperature Voltage Rating: 00/00 V 1 0 01
Anixter Number Area Insulation Thickness Single-Core XLPE/PVC 00/00 V -##-## = colour, -0 = black, -0 = blue, -0 = brown, -0 = grey, -0 = green/yellow. e.g. AEG-000-0-0 = black insulation, black sheath. AEG-000-0-0 = brown insulation, black sheath. Other colours available upon request. All dimensions are nominal unless otherwise stated. For further technical information see page 1:. For conductor short-circuit ratings refer to page 0:. O/D Approx Weight kg/km AEG-000-##-## 0 1.0. 0 0 AEG-000-##-## 0 1.1. 0 0 AEG-00-##-## 1.1. 0 AEG-0-##-## 1. 0. 0 0 AEG-00-##-## 0 1.. 0 0 AEG-0-##-## 1.. 00 0 AEG-00-##-## 0 1.. 0 0 AEG-000-##-## 00 1. 0. 00 0 AEG-000-##-## 00.0. 0 AEG-000-##-## 00..0 0 0 AEG-00-##-## 0.. 0 0 AEG-000-##-## 00.. 00 0 AEG-00-##-## 00..0 1 0 Minimum Bending Radius (fixed bend) 1 1 1 0 01
1 Single-Core XLPE/PVC/AWA/PVC Power Cable 00/00 V and 00/00 V Application Armoured single-core cable for use in fixed installations, indoor, outdoor or direct burial. 1 Specifications In accordance with BS s: Stranded Class copper conductors to BS EN 0 Insulation: Brown XLPE insulation Type GP to BS Inner Sheath: PVC inner sheath Type to BS Aluminium wires to BS Outer Sheath: Black PVC outer sheath Type to BS Flame retardant to BS EN 0-1- Temperature Rating: 0 C maximum conductor operating temperature Voltage Rating: 00/00 & 00/00 V 1 0 01 1
Anixter Number 00/00 V Cables Number of Cores Area Single-Core XLPE/PVC/AWA/PVC Power Cable 00/00 V and 00/00 V Insulation Thickness Diameter Under Armour Armour Wire Size For further technical information see page 1:. (See 1: for technical information on 00/00 V cables). For conductor and armour resistances refer to page 0:0. For gross cross-sectional area of armour refer to page 0:. For conductor short-circuit ratings refer to page 0:. For armour short-circuit ratings refer to page 0:. O/D Approx Weight BS-1C-000 1 0 1.0 1. 0.. 00 1 BS-1C-000 1 0 1.1. 1. 0. 0 BS-1C-00 1 1.1. 1.. 0 BS-1C-0 1 1.. 1.. 0 0 BS-1C-00 1 0 1. 0. 1.. 0 0 BS-1C-0 1 1.. 1. 0.0 0 0 BS-1C-00 1 0 1..0 1.. 0 00 BS-1C-000 1 00 1.. 1.. 0 0 BS-1C-000 1 00.0..0 0. 00 0 BS-1C-000 1 00..0.0. 0 0 BS-1C-00 1 0. 0..0. 0 00 BS-1C-000 1 00.... 00 0 BS-1C-000 1 00. 0.. 0. 0 0 00/00 V Cables ABX-000 1 0.0. 1. 0. ABX-000 1 0.0. 1.. 0 0 ABX-00 1.0. 1.. 0 ABX-0 1.0 0. 1.. 0 0 ABX-00 1 0.0. 1.. 0 0 ABX-0 1.0.0 1. 0. 0 0 ABX-00 1 0.0. 1.. 0 ABX-000 1 00.0.1 1..1 0 ABX-000 1 00.0..0 0. 00 0 ABX-000 1 00..0.0. 0 0 ABX-00 1 0. 0..0. 0 00 ABX-000 1 00.... 00 0 ABX-000 1 00. 0.. 0. 0 0 kg/km Min Bending Radius (fixed bend) 1 1 1 0 01 1
1 Multicore XLPE/PVC/SWA/PVC Power Cable 00/00 V and 00/00 V Application Armoured cables for use in fixed installations for use indoor, outdoor or for direct burial. 1 1 Specifications In accordance with BS s: Stranded Class copper conductors to BS EN 0 Insulation: XLPE insulation Type GP to BS Core Identification: core - brown, blue core - brown, black, grey core - brown, black, grey, blue core + above - number printed Inner Sheath: PVC inner sheath Type to BS Mild galvanised steel wires to BS EN -1 Outer Sheath: Black PVC outer sheath Type to BS Flame retardant to BS EN 0-1- Temperature Rating: 0 C maximum conductor operating temperature Voltage Rating: 00/00 V NB: 00/00V only available in core. 0 01
Multicore XLPE/PVC/SWA/PVC Power Cable 00/00 V and 00/00 V Anixter Number Number of Cores Area Insulation Thickness Diameter Under Armour Armour Wire Size O/D Approx Weight kg/km Min Bending Radius (fixed bend) 00/00 V BS-C-00 1.* 0.. 0. 1.1 0 BS-C-00.* 0..0 0. 1. 0 BS-C-000 * 0..1 0.. 0 0 BS-C-000 * 0.. 0.. 0 BS-C-00 * 0. 1. 0..0 1 BS-C-00 0.. 1. 0. 00 BS-C-00 \\ 0.. 1. 0. 0 BS-C-00 0.. 1.. 0 BS-C-000 0 1.0.0 1.. 00 BS-C-000 0 1.1.0 1..0 0 0 BS-C-00 1.1.1.0.1 0 0 BS-C-0 1...0.1 0 0 BS-C-00 0 1. 0..0. 00 0 BS-C-0 1.... 0 0 BS-C-00 0 1..0..0 0 00 BS-C-000 00 1.... 0 BS-C-000 00.0...0 0 0 BS-C-00 1.* 0.. 0. 1. 0 0 BS-C-00.* 0.. 0..1 0 0 BS-C-000 * 0.. 0.. 0 0 BS-C-000 * 0. 1.0 0.. 0 0 BS-C-00 * 0..0 1.. 0 BS-C-00 0.. 1. 1. 0 BS-C-00 0. 0.1 1.. 0 0 BS-C-00 0.. 1.. 0 0 BS-C-000 0\\ 1.0 1. 1.. 0 0 BS-C-000 0 1.1. 1.. 0 BS-C-00 1.1..0.0 00 BS-C-0 1..0.0 0. 0 0 BS-C-00 0 1.... 0 BS-C-0 1. 0.0.. 0 00 BS-C-00 0 1....1 0 0 BS-C-000 00 1... 0. 10 0 BS-C-000 00.0... 0 0 1 1 1 *Circular stranded conductors. \\ Shaped stranded conductors on sq & above ( core), 0sq & above ( & core). Circular or circular compacted stranded conductors. Continued overleaf... 0 01
1 1 1 Multicore XLPE/PVC/SWA/PVC Power Cable 00/00 V and 00/00 V (continued) Anixter Number 00/00 V Number of Cores Area Insulation Thickness Diameter Under Armour Armour Wire Size O/D Approx Weight BS-C-00 1.* 0.. 0. 1. 0 0 BS-C-00.* 0.. 0..0 0 0 BS-C-000 * 0.. 0.. 0 0 BS-C-000 * 0. 1. 1.. 0 BS-C-00 * 0.. 1. 1.1 0 BS-C-00 0.. 1.. 0 0 BS-C-00 0.. 1.. 0 0 BS-C-00 0..1 1. 1. 0 00 BS-C-000 0\\ 1.0.0 1..0 0 0 BS-C-000 0 1.1..0. 0 0 BS-C-00 1.1..0 1. 0 0 BS-C-0 1....1 0 0 BS-C-00 0 1. 1.. 1. 00 0 BS-C-0 1.... 00 0 BS-C-00 0 1....0 0 BS-C-000 00 1..0.. 0 0 BS-C-000 00.0...1 0 0 AAM-C00Q 1.* 0.. 0.. 0 AAM-C01Q 1 1.* 0. 1. 1.. AAM-COQ 1.* 0.. 1.. 0 AAM-C0Q 1.* 0. 0.1 1.. 0 AAM-C0Q 1.* 0.. 1..0 0 AAP-C00Q.* 0. 1. 0..1 1 AAP-C01Q 1.* 0.. 1.. 0 AAP-C0Q.* 0. 0.0 1.. 00 0 AAP-C0Q.* 0.. 1. 0. 0 AAP-C0Q.* 0..0 1.. 0 kg/km Min Bending Radius (fixed bend) 0 01
Anixter Number 00/00 V Cables Number of Cores Area Multicore XLPE/PVC/SWA/PVC Power Cable 00/00 V and 00/00 V Insulation Thickness Diameter Under Armour Armour Wire Size *Circular stranded conductors. \\ Cables having conductors of nominal area 0sq and above have shaped stranded conductors. Circular or circular compacted stranded conductors. For further technical information see page 1:. (See 1: for technical information on 00/00 V cables). For conductor and armour resistances refer to page 0:1. For gross cross-sectional area of armour refer to page 0:. For conductor short-circuit ratings refer to page 0:. For armour short-circuit ratings refer to page 0:. O/D Approx Weight ABZ-00.0.1 1.. 00 0 ABZ-00.0. 1.. 00 00 ABZ-00.0. 1.. 0 ABZ-000 0\\.0..0. 00 0 ABZ-000 0.0..0.0 00 ABZ-00.0.0.0 1. 0 0 ABZ-0.0.1.. 00 0 ABZ-00 0.0... 0 0 ABZ-0.0 1.. 1. 0 0 ABZ-00 0.0... 0 ABZ-000 00.0 0.. 1. 0 0 ABZ-000 00.0... 00 0 kg/km Min Bending Radius (fixed bend) 1 1 1 0 01
1 Single-Core LSF 1B 0 C 00/00 and 0/0 V Application LSF insulated only cable for fixed wiring purposes. Used in trunking or conduit, or may be surface mounted when used for earthing. Especially for use in areas where fire would create dense smoke and toxic fumes causing a major threat to life and equipment. 1 1 Specifications In accordance with BS and Cenelec harmonised codes H0Z-U (Solid conductors) H0Z-R (Stranded conductors) s: Solid Class 1 or Stranded Class copper conductors to BS EN 0 Insulation: Low smoke zero halogen thermosetting insulation Type EI. to BS EN 0-, displaying following characteristics: Oxygen Index: 0% minimum HCL emission @ 00 C: 0.% maximum Flame retardant to BS EN 0-- (up to and incl. 1.0 ) and BS EN 0-1- (above 1.0 ) Normal colours available. (see 1X page 1:) Temperature Rating: 0 C maximum conductor operating temperature Voltage Rating: Up to and including 1.0 00/00 V 1. and above - 0/0 V 0 01
Anixter Number Cenelec Code Area Class Insulation Thickness -## = colour, -0 = black, -0 = blue, -0 = brown, -0 = grey, -0 = green/yellow. Other colours available upon request. All dimensions are nominal unless otherwise stated. For further technical information see page 1:. For conductor short-circuit ratings refer to page 0: for XLPE insulated cable. Single-Core LSF 1B 0 C 00/00 and 0/0 V Maximum O/D Approx Weight ABR-00-## H0Z-U1 1. 1 0.. 0 ABT-00-## H0Z-R1 1. 0.. ABR-00-## H0Z-U1. 1 0..0 1 1 ABT-00-## H0Z-R1. 0..1 1 ABT-000-## H0Z-R1 0.. ABT-000-## H0Z-R1 0.. ABT-00-## H0Z-R1 1.0.0 1 1 ABT-00-## H0Z-R1 1.0.0 ABT-00-## H0Z-R1 1..1 0 ABT-00-## H0Z-R1 1.. 0 ABT-000-## H0Z-R1 0 1. 1. 0 ABT-000-## H0Z-R1 0 1..1 0 ABT-00-## H0Z-R1 1.. 0 ABT-0-## H0Z-R1 1.. 0 ABT-00-## H0Z-R1 0 1. 1. 1 0 ABT-0-## H0Z-R1.0.1 0 ABT-00-## H0Z-R1 0.. 0 0 ABT-000-## H0Z-R1 00. 0. 0 ABT-000-## H0Z-R1 00.. 00 ABT-000-## H0Z-R1 00.. 0 0 ABT-00-## H0Z-R1 0.. 00 0 kg/km Min Bending Radius (fixed bend) 1 1 1 0 01
1 Single-Core XLPE/LSF 1B 00/00 V Application XLPE insulated and LSF sheathed cable for fixed installation. Not suitable for direct burial. 1 Specifications Generally in accordance with BS s: Stranded Class copper conductors to BS EN 0 Insulation: Brown XLPE insulation Type GP to BS Sheath: Black LSF sheath Type LTS1 to BS Flame retardant to BS EN 0-- Other colours are available. (Details upon request) Temperature Rating: 0 C maximum conductor operating temperature Voltage Rating: 00/00 V 1 0 01 0
Anixter Number Area Other colours available upon request. Insulation Thickness O/D All dimensions are nominal unless otherwise stated. For further technical information see page 1:. For conductor short-circuit ratings refer to page 0: for XLPE insulated cable. Single-Core XLPE/LSF 1B 00/00 V Approx Weight kg/km 1B-000-0-0 0 1.0. 0 0 1B-000-0-0 0 1.1. 0 0 1B-00-0-0 1.1. 0 1B-0-0-0 1. 0. 0 0 1B-00-0-0 0 1.. 0 0 1B-0-0-0 1.. 00 0 1B-00-0-0 0 1.. 0 0 1B-000-0-0 00 1. 0. 00 0 1B-000-0-0 00.0. 0 1B-000-0-0 00..0 0 0 1B-00-0-0 0.. 0 0 1B-000-0-0 00.. 00 0 1B-00-0-0 00..0 1 0 Minimum Bending Radius (fixed bend) 1 1 1 0 01 1
1 Single-Core XLPE/LSF/AWA/LSF Power Cable 00/00 V and 00/00 V Application LSF insulated, armoured and sheathed, single-core power cable for use in fixed installations. Especially for use in areas where fire would create dense smoke and toxic fumes causing a major threat to life and equipment. 1 1 Specifications In accordance with BS s: Stranded Class copper conductors to BS EN 0 Insulation: Brown XLPE insulation Type GP to BS Inner Sheath: LSF inner sheath Type LTS1 to BS Aluminium wires to BS Outer Sheath: Black LSF outer sheath Type LTS1 to BS Flame retardant to BS EN 0-- & IEC0-- Cat. C as a minimum Temperature Rating: 0 C maximum conductor operating temperature Voltage Rating: 00/00 & 00/00 V 0 01
Anixter Number 00/00 V Cables Number of Cores Area Single-Core XLPE/LSF/AWA/LSF Power Cable 00/00 V and 00/00 V Insulation Thickness Diameter Under Armour Armour Wire Size CONDUCTORS MAY BE CIRCULAR OR CIRCULAR COMPACTED. For further technical information refer to page 1: (See 1: for technical information on 00/00 V cables). For conductor and armour resistances refer to page 0:0. For gross cross-sectional area of armour refer to page 0:. For conductor short-circuit ratings refer to page 0:. For armour short-circuit ratings refer to page 0:. O/D Approx Weight BS-1C-000 1 0 1.0 1. 0.. 1 BS-1C-000 1 0 1.1. 1. 0. 0 BS-1C-00 1 1.1. 1.. 0 BS-1C-0 1 1.. 1.. 0 0 BS-1C-00 1 0 1. 0. 1.. 0 0 BS-1C-0 1 1.. 1. 0.0 0 0 BS-1C-00 1 0 1..0 1.. 0 00 BS-1C-000 1 00 1.. 1.. 0 0 BS-1C-000 1 00.0..0 0. 0 0 BS-1C-000 1 00..0.0. 0 0 BS-1C-00 1 0. 0..0. 1 00 BS-1C-000 1 00. 0.. 0. 0 0 00/00 V Cables A-AY-000 1 0.0. 1. 0. 00 A-AY-000 1 0.0. 1.. 0 0 A-AY-00 1.0. 1.. 0 0 A-AY-0 1.0 0. 1.. 0 0 A-AY-00 1 0.0. 1.. 0 0 A-AY-0 1.0.0 1. 0. 0 0 A-AY-00 1 0.0. 1.. A-AY-000 1 00.0.1 1..1 0 0 A-AY-000 1 00.0..0 0. 0 0 A-AY-000 1 00..0.0. 0 0 A-AY-00 1 0. 0..0. 1 00 A-AY-000 1 00.... 0 0 A-AY-000 1 00. 0.. 0. 0 0 kg/km Min Bending Radius (fixed bend) 1 1 1 0 01
1 Multicore XLPE/LSF/SWA/LSF Power and Control Cable 00/00 and 00/00 V Application LSF insulated, armoured and sheathed, multicore power cable. Especially for use in areas where fire would create dense smoke and toxic fumes causing a major threat to life and equipment. 1 1 Specifications In accordance with BS s: Stranded Class copper conductors Insulation: XLPE insulation Type GP to BS Core identification: core - brown, blue core - brown, black, grey core - brown, black, grey, blue core - brown, black, grey, blue, green/yellow Inner Sheath: LSF inner sheath Type LTS1 to BS Mild galvanised steel wires to BS EN -1 Outer Sheath: Black LSF outer sheath Type LTS1 to BS Flame retardant to BS EN 0-- & IEC0-- Cat. C as a minimum Temperature Rating: 0 C maximum conductor operating temperature Voltage Rating: 00/00 & 00/00 V NB:00/00 V only available in core. 0 01
Anixter Number 00/00 V Cables Multicore XLPE/LSF/SWA/LSF Power and Control Cable 00/00 and 00/00 V Number of Cores Area Insulation Thickness Diameter Under Armour Armour Wire Size BS-C-00 1.* 0.. 0. 1. 0 0 BS-C-00.* 0.. 0..1 00 0 BS-C-000 * 0.. 0.. 00 0 BS-C-000 * 0. 1.0 0.. 0 0 BS-C-00 * 0..0 1.. 00 BS-C-00 0.. 1. 1. BS-C-00 0. 0.1 1.. 0 0 BS-C-00 0.. 1.. 0 BS-C-000 0\\ 1.0 1. 1.. 0 0 BS-C-000 0 1.1. 1.. 0 0 BS-C-00 1.1..0.0 0 00 BS-C-0 1..0.0 0. 00 0 BS-C-00 0 1.... 0 0 BS-C-0 1. 0.0.. 0 00 BS-C-00 0 1....1 0 0 BS-C-000 00 1... 0. 0 0 BS-C-000 00.0... 0 0 *Circular stranded conductors. \\ Shaped stranded conductors on sq & above ( core), 0sq & above ( & core). Circular or circular compacted stranded conductors. Continued overleaf... O/D Approx Weight BS-C-00 1.* 0.. 0. 1.1 0 BS-C-00.* 0..0 0. 1. 0 0 BS-C-000 * 0..1 0.. 0 0 BS-C-000 * 0.. 0.. 00 0 BS-C-00 * 0. 1. 0..0 00 1 BS-C-00 0.. 1. 0. 0 BS-C-00 \\ 0.. 1. 0. 0 0 BS-C-00 0.. 1.. 0 0 BS-C-000 0 1.0.0 1.. 00 BS-C-000 0 1.1.0 1..0 0 0 BS-C-00 1.1.1.0.1 0 0 BS-C-0 1...0.1 0 BS-C-00 0 1. 0..0. 0 0 BS-C-0 1.... 0 0 BS-C-00 0 1..0..0 00 00 BS-C-000 00 1.... 0 0 BS-C-000 00.0...0 0 0 kg/km Min Bending Radius (fixed bend) 1 1 1 0 01
1 1 1 0 Multicore XLPE/LSF/SWA/LSF Power and Control Cable 00/00 and 00/00 V (continued) Anixter Number Number of Cores Area Insulation Thickness Diameter Under Armour Armour Wire Size O/D Approx Weight kg/km Min Bending Radius (fixed bend) BS-C-00 1.* 0.. 0. 1. 0 0 BS-C-00.* 0.. 0..0 0 0 BS-C-000 * 0.. 0.. 0 0 BS-C-000 * 0. 1. 1.. 0 BS-C-00 * 0.. 1. 1.1 0 BS-C-00 0.. 1.. 0 BS-C-00 0.. 1.. 00 0 BS-C-00 0..1 1. 1. 0 00 BS-C-000 0\\ 1.0.0 1..0 0 0 BS-C-000 0 1.1..0. 0 BS-C-00 1.1..0 1. 0 BS-C-0 1....1 0 0 BS-C-00 0 1. 1.. 1. 0 0 BS-C-0 1.... 00 0 BS-C-00 0 1....0 0 BS-C-000 00 1..0.. 0 0 A-0-C00 1.* 0.. 0.. 0 0 A-0-C01 1 1.* 0. 1. 1.. 0 A-0-C0 1.* 0.. 1.. 0 0 A-0-C0 1.* 0. 0.1 1.. 0 0 A-0-C0 1.* 0.. 1..0 0 0 A-P-C00.* 0. 1. 0..1 00 1 A-P-C01 1.* 0.. 1.. 0 0 A-P-C0.* 0. 0.0 1.. 0 0 A-P-C0.* 0.. 1. 0. 0 0 A-P-C0.* 0..0 1.. 0 A-Q-C00 * 0.. 1.. 0 A-Q-C01 1 * 0.. 1.. 0 0 A-Q-C0 * 0.. 1.. 0 0 A-Q-C0 * 0.. 1.. 0 A-Q-C0 * 0. 1..0. 0 0 01
Anixter Number Multicore XLPE/LSF/SWA/LSF Power and Control Cable 00/00 and 00/00 V (continued) Number of Cores Area Insulation Thickness Diameter Under Armour Armour Wire Size 00/00 V Five Core Cables BS-C-00N 1.* 0.. 0.. 0 0 BS-C-00N.* 0.. 0..1 00 0 BS-C-000N * 0. 1.0 0.. 1 BS-C-000N * 0.. 1. 0.0 BS-C-00N * 0.. 1.. 0 BS-C-00N 0. 0.0 1.. 0 0 BS-C-00 0.. 1. 1. 00 0 BS-C-00 0.. 1.. 0 BS-C-000 0 1.0..0 0. 00 0 BS-C-000 0 1.1..0. 0 0 BS-C-00 1.1... 0 0 BS-C-0 1.... 0 00/00 V Cables A-AZ-00.0. 1.. 0 00 A-AZ-00.0.0 1..0 0 A-AZ-000 0\\.0..0. 00 0 A-AZ-000 0.0..0.0 A-AZ-00.0.0. 1. 0 0 A-AZ-0.0.1.. 00 0 A-AZ-00 0.0... 0 0 A-AZ-0.0 1.. 1. 0 0 A-AZ-00 0.0... 00 0 A-AZ-000 00.0 0.. 1. 1 0 A-AZ-000 00.0... 0 0 N.B. Part numbers for core cable ending in a letter N, e.g. BS-C-00N, indicate that the cable has number printed cores. All cables containing, 1,, and cores also have number printed core identification. * Circular stranded conductors. Circular or circular compacted stranded conductors. \\ Cables having conductors of nominal area 0sq and above have shaped stranded conductors (with the exception of core cables). For more technical information see page 1: (See 1: for technical information on 00/00 V cables). For conductor and armour resistances refer to page 0:1. For gross cross-sectional area of armour refer to page 0:. For conductor short-circuit ratings refer to page 0:. For armour short-circuit ratings refer to page 0:. O/D Approx Weight kg/km Min Bending Radius (fixed bend) 1 1 1 0 01
1 Single-Core XLPE/LSF/AWA/LSF Power Cable./ kv Application LSF armoured power cable for use in fixed installations. Especially for use in areas where fire would create dense smoke and toxic fumes causing a major threat to life and equipment. 1 1 Specifications In accordance with BS s: Stranded Class copper conductors to BS EN 0 Extruded semi-conducting layer Insulation: XLPE insulation Extruded semi-conducting layer Plain copper tape screen Inner Sheath: LSF inner sheath Type LTS1 to BS Aluminium wires to BS Outer Sheath: Red LSF outer sheath Type LTS1 to BS Flame retardant to BS EN 0-- & IEC0-- Cat. C as a minimum Temperature Rating: 0 C maximum conductor operating temperature Voltage Rating: 0/100 V For further technical information refer to page 1:. 0 01
Anixter Number Number of Cores Area Single-Core XLPE/LSF/AWA/LSF Power Cable./ kv Insulation Thickness Diameter Under Armour Armour Wire Size O/D Approx Weight kg/km Minimum Bending Radius During Installation 0/100 V Cable AEN-0-0 1 0. 0. 1.. 0 0 0 AEN-0-0 1 0.. 1.. 00 0 0 AEN--0 1.. 1. 1. 00 0 0 AEN-1-0 1.. 1..1 00 00 00 AEN--0 1 0...0. 00 0 0 AEN-1-0 1..0.0. 000 0 0 AEN-0-0 1 0. 1..0. 00 00 0 AEN-0-0 1 00...0. 00 0 AEN-00-0 1 00...0. 00 0 0 AEN-00-0 1 00.... 00 0 00 AEN-0-0 1 0..1.. 00 00 0 Adjacent to joints and Termination 1 1 1 0 01
1 Three Core XLPE/LSF/SWA/LSF Power Cable./ kv Application LSF armoured power cable for use in fixed installations. Especially for use in areas where fire would create dense smoke and toxic fumes causing a major threat to life and equipment. 1 1 Specifications In accordance with BS s: Stranded Class copper conductors to BS EN 0 Extruded semi-conducting layer Insulation: XLPE insulation Extruded semi-conducting layer Plain copper tape screen Inner Sheath: LSF inner sheath Type LTS1 to BS Mild galvanised steel wires to BS EN -1 Outer Sheath: Red LSF outer sheath Type LTS1 to BS Flame retardant to BS EN 0-- & IEC0-- Cat. C as a minimum Temperature Rating: 0 C maximum conductor operating temperature Voltage Rating: 0/100 V For further technical information refer to page 1:. 0 01 0
Anixter Number AEN- Number of Cores Area Three Core XLPE/LSF/SWA/LSF Power Cable./ kv Insulation Thickness Diameter Under Armour Armour Wire Size O/D Approx Weight kg/km Minimum Bending Radius During Installation 0-0...0. 00 0 0 0-0..1.. 00 0 0 0-0. 0.. 0. 00 00-0 0....1 00 0 0 00-0 0....1 00 0 0 0-0. 0.. 1. 00 0 0-0..0..0 00 0 0 0-0 0....0 00 0 0-0. 0... 10 0 0 0-0 0....0 00 0 0 00-0 00. 1.0.. 00 0 0 00-0 00..0. 0. 00 10 Adjacent to joints and Termination 1 1 1 0 01 1
1 BS Fire Resistant Cable Incorporating circuit protective conductor (CPC) 00/00 V Application Unarmoured fire resistant cable for use in fixed wiring installations where it is necessary for the cable to retain circuit integrity in the event of a fire, e.g. emergency services, alarm systems, lighting. 1 1 Specifications In accordance with BS Part 1 BASEC Approved s: Solid Class 1 or stranded Class copper conductors to BS EN 0 Insulation: Silicone rubber insulation type EI to BS EN 0-1 Core Identification: core - brown, blue core - brown, black, grey core - brown, black, grey, blue, 1, core brown and black marker cores in each layer, remaining cores grey Woven glass tape to BS EN Tinned copper CPC (Class 1, or ) under and in contact with aluminium/mylar tape Low smoke zero halogen sheath Type LTS to BS (red or white) Fire resistant to IEC01 and categories CWZ of BS. Meets BS., ph0 BS EN 000 (Standard) Flame retardant to BS EN 0-1- Meets BS and IEC m cube smoke emission test Temperature Rating: 0 C maximum conductor operating temperature Voltage Rating: 00/00 V 0 01
Anixter Number Number of Cores Area Stranding #/ C.P.C. Area BS Fire Resistant Cable Incorporating circuit protective conductor (CPC) 00/00 V C.P.C. Stranding #/ Insulation Thickness BS-C-***-S 1. /0. 1. 0/0. 0.. BS-C-***-S. /0.. 0/0. 0..1 0 0 Above details are based on Draka Firetuf cables. For further technical information see page 1:. *** WTE = white sheath, RED = red sheath. Nom O/D Approx Weight Solid s BS-C-*** 1.0 1/1.1 1.0 1/1.1 0..0 0 BS-C-*** 1. 1/1. 1. 1/1. 0.. 1 0 BS-C-***. 1/1.. 1/1. 0.. 0 0 BS-C-*** 1.0 1/1.1 1.0 1/1.1 0.. 1 0 BS-C-*** 1. 1/1. 1. 1/1. 0.. 0 BS-C-***. 1/1.. 1/1. 0.. 0 0 BS-C-*** 1.0 1/1.1 1.0 1/1.1 0.. 1 0 BS-C-*** 1. 1/1. 1. 1/1. 0.. 0 0 BS-C-***. 1/1.. 1/1. 0.. 0 BS-C-*** 1.0 1/1.1 1.0 /0. 0.. 0 BS-1C-*** 1 1.0 1/1.1 1.0 /0. 0. 1. 0 BS-C-*** 1.0 1/1.1 1.0 /0. 0.. 0 0 BS-C-*** 1. 1/1. 1. 0/0. 0. 1. 0 0 BS-1C-*** 1 1. 1/1. 1. 0/0. 0.. 0 0 BS-C-*** 1. 1/1. 1. 0/0. 0.. 0 1 BS-C-***. 1/1.. 0/0. 0.. 0 BS-1C-*** 1. 1/1.. 0/0. 0.. BS-C-***. 1/1.. 0/0. 0.. 00 0 Stranded s BS-C-***-S 1. /0. 1. /0. 0.. 0 BS-C-***-S. /0.. /0. 0.. 0 BS-C0-***-S.0 /0..0 /0. 0..1 0 BS-C-***-S 1. /0. 1. /0. 0.. 0 BS-C-***-S. /0.. /0. 0.. 0 BS-C0-***-S.0 /0..0 /0. 0. 1. 0 BS-C-***-S 1. /0. 1. /0. 0.. 0 BS-C-***-S. /0.. /0. 0. 1. 0 BS-C0-***-S.0 /0..0 /0. 0. 1. 0 BS-C-***-S 1. /0. 1. 0/0. 0. 1. 0 BS-C-***-S. /0.. 0/0. 0..0 00 0 BS-1C-***-S 1 1. /0. 1. 0/0. 0.. 1 BS-1C-***-S 1. /0.. 0/0. 0.. 0 kg/km Min Bending Radius (fixed bend) 1 1 1 0 01
1 Fire Resistant Armoured Power Cable 00/00V Application Armoured fire resistant cable for use in fixed wiring installations where it is necessary for the cable to retain circuit integrity in the event of a fire, e.g. emergency services, alarm systems, lighting, etc., and in situations where power must be maintained to allow controlled closedown of equipment. 1 1 Specifications In accordance with BS BASEC Approved s: Stranded Class copper conductors to BS EN 0 Mica/glass tape (S) Insulation: XLPE insulation type GP to BS Core Identification: core - brown, blue core - brown, black, grey core - brown, black, grey, blue core + above - number printed Inner Sheath: LSF inner sheath Type LTS1 to BS Mild galvanised steel wires to BS EN -1 Outer Sheath: Black LSF outer sheath Type LTS1 to BS Fire resistant to IEC01 and categories CWZ of BS and BS Clause. Flame retardant to BS EN 0-- & IEC0-- Cat. C as a minimum Meets BS and IEC smoke emission test and ph0 BS EN 000 Temperature Rating: 0 C maximum conductor operating temperature Voltage Rating: 00/00 V 0 01
Anixter Number Two Core Number of Cores Area Insulation Thickness Fire Resistant Armoured Power Cable 00/00 V Diameter Under Armour Armour Wire Size O/D Approx Weight BS-C-00 1.* 0.. 0. 1.0 1 0 BS-C-00.* 0.. 0.. 0 BS-C-000.0* 0.. 0.. 0 BS-C-000.0* 0.. 0.. 0 1 BS-C-00 * 0.. 0..0 0 BS-C-00 0..0 1. 1. BS-C-00 0.. 1..0 0 BS-C-00 0. 1. 1.. 0 BS-C-000 0// 1.0. 1.. 0 BS-C-000 0 1.1.0 1. 0.0 0 BS-C-00 1.1.0.0.0 0 BS-C-0 1...0.0 0 00 BS-C-00 0 1. 1..0 0.0 0 BS-C-0 1....0 0 BS-C-00 0 1. 0.0. 0.0 00 BS-C-000 00 1....0 0 BS-C-000 00.0.. 0.0 0 0 Three Core BS-C-00 1.* 0..1 0. 1. 0 BS-C-00.* 0.. 0..0 0 BS-C-000.0* 0.. 0.. 0 0 BS-C-000.0* 0. 1. 0.. 1 BS-C-00 * 0..0 1. 0. 0 BS-C-00 0.. 1.. 1 0 BS-C-00 0. 0. 1.. 0 BS-C-00 0.. 1. 1.0 1 0 BS-C-000 0 // 1.0. 1. 0.0 0 BS-C-000 0 1.1.0 1..0 0 BS-C-00 1.1..0.0 1 0 BS-C-0 1...0.0 0 BS-C-00 0 1....0 1 0 BS-C-0 1. 1.. 1.0 0 0 BS-C-00 0 1....0 0 0 BS-C-000 00 1. 0.. 1.0 1 BS-C-000 00.0...0 0 0 kg/km Min Bending Radius (fixed bend) Continued overleaf... 1 1 1 0 01
1 1 1 Fire Resistant Armoured Power Cable 00/00 V (continued) Anixter Number Four Core Number of Cores Area Insulation Thickness Diameter Under Armour Armour Wire Size O/D Approx Weight BS-C-00 1.* 0..1 0.. 0 BS-C-00.* 0.. 0..0 0 BS-C-000.0* 0. 1. 0.. 1 BS-C-000.0* 0.. 1. 0.0 BS-C-00 * 0..0 1.. 1 0 BS-C-00 0.. 1.. 0 BS-C-00 0.. 1. 0.0 1 0 BS-C-00 0.. 1..0 00 BS-C-000 0// 1.0.0 1..0 1 0 BS-C-000 0 1.1.0.0.0 0 0 BS-C-00 1.1..0.0 0 0 BS-C-0 1....0 0 BS-C-00 0 1....0 0 BS-C-0 1....0 0 BS-C-00 0 1....0 0 BS-C-000 00 1... 0.0 0 BS-C-000 00.0...0 0 0 C+ 1.sq AEF-000-0 1.* 0.. 0.. 1 1 AEF-0-0 1 1.* 0..0 1. 1. 0 AEF-00-0 1.* 0.. 1.. 1 0 AEF-00-0 1.* 0.. 1.. 0 AEF-00-0 1.* 0.. 1..0 1 kg/km Min Bending Radius (fixed bend) 0 01
Anixter Number C+.sq Number of Cores Area Insulation Thickness Fire Resistant Armoured Power Cable 00/00 V (continued) *Circular stranded conductors. // Cables having conductors of nominal area 0sq and above will have shaped stranded conductors. Circular or circular compacted stranded conductors. For more technical information refer to page 1:0. For conductor and armour resistances refer to page 0:1 and 0:. For gross cross-sectional area of armour refer to page 0:. For conductor short-circuit ratings refer to page 0:. For armour short-circuit ratings refer to page 0:. Diameter Under Armour Armour Wire Size NB: and cables may be supplied with SHAPED conductors. Details on dimensions, weights etc., available on request. O/D Approx Weight AEF-000-0.* 0. 1. 0.. AEF-0-0 1.* 0.. 1.. 0 AEF-00-0.* 0.. 1..0 1 0 AEF-00-0.* 0.. 1..0 1 AEF-00-0.* 0.. 1..0 0 0 C+.0sq AEF-0000-0.0* 0.. 1. 1.0 AEF-00-0 1.0* 0. 1.1 1.. 0 AEF-000-0.0* 0..0 1..0 0 0 AEF-000-0.0* 0. 1.0 1..0 0 AEF-000-0.0* 0..0.0.0 1 0 kg/km Min Bending Radius (fixed bend) 1 1 1 0 01
1 Single-Core XLPE/PVC/AWA/PVC Power Cable./.,./ and./ kv Application Power cable for use on fixed installations, indoor, outdoor or direct burial. 1 1 Specifications In accordance with BS s: Stranded Class copper conductors to BS EN 0 Extruded semi-conducting layer Insulation: XLPE insulation Extruded semi-conducting layer Plain copper tape screen Inner Sheath: PVC inner sheath Type to BS Aluminium wires to BS Outer Sheath: PVC outer sheath Type to BS Flame retardant to BS EN 0-1- Temperature Rating: 0 C maximum conductor operating temperature Voltage Rating: 00/00, 0/100, & 00/000 V For black sheath add suffix -0, for red sheath -0. For further technical information refer to page 1:. 0 01
Anixter Number Number of Cores Area Single-Core XLPE/PVC/AWA/PVC Power Cable./ kv Insulation Thickness Diameter Under Armour Armour Wire Size O/D Approx Weight kg/km Minimum Bending Radius During Installation 00/00 V Cables ACJ-0 1 0.. 1.. 0 0 ACJ-0 1 0. 0. 1.. 00 0 0 ACJ- 1.. 1.. 00 0 0 ACJ-1 1.. 1. 0. 000 0 0 ACJ- 1 0.. 1.. 00 0 0 ACJ-1 1..0.0.0 00 0 0 ACJ-0 1 0...0. 00 0 0 ACJ-0 1 00...0 0. 00 0 0 ACJ-00 1 00.0..0.1 0 0 0 ACJ-00 1 00..0..0 00 0 0 ACJ-0 1 0.... 00 00 0 0/100 V Cable ACT-0-0 1 0. 0. 1.. 0 0 0 ACT-0-0 1 0.. 1.. 00 0 0 ACT--0 1.. 1. 1. 00 0 0 ACT-1-0 1.. 1..1 00 00 00 ACT--0 1 0...0. 00 0 0 ACT-1-0 1..0.0. 000 0 0 ACT-0-0 1 0. 1..0. 00 00 0 ACT-0-0 1 00...0. 00 0 ACT-00-0 1 00...0. 00 0 0 ACT-00-0 1 00.... 00 0 00 ACT-0-0 1 0..1.. 00 00 0 00/000 V Cables ADE-0 1 0.. 1. 0. 00 0 0 ADE-0 1 0..1 1..1 00 0 0 ADE- 1...0. 0 0 0 ADE-1 1...0. 00 0 0 ADE- 1 0...0. 00 0 0 ADE-1 1. 1..0 0.0 00 00 0 ADE-0 1 0...0. 00 0 ADE-0 1 00..1.0. 00 0 0 ADE-00 1 00..0..0 00 0 0 ADE-00 1 00. 1...1 00 0 0 ADE-0 1 0.... 00 0 0 Adjacent to joints and Termination 1 1 1 0 01
1 Three Core XLPE/PVC/SWA/PVC Power Cable./.,./ and./ kv Application Multicore power cable for use on fixed installations. Indoor or outdoor use, or for direct burial. 1 1 Specifications In accordance with BS s: Stranded Class copper conductors to BS EN 0 Extruded semi-conducting layer Insulation: XLPE insulation Extruded semi-conducting layer Plain copper tape screen Inner Sheath: PVC inner sheath Type to BS Mild galvanised steel wires to BS EN -1 Outer Sheath: PVC outer sheath Type to BS Flame retardant to BS EN 0-1- Temperature Rating: 0 C maximum conductor operating temperature Voltage Rating: 00/00, 0/100, & 00/000 V For black sheath add suffix -0, for red sheath -0 to part number. For further technical information refer to page 1:. 0 01 0
Anixter Number Number of Cores Area Three Core XLPE/PVC/SWA/PVC Power Cable./.,./ and./ kv Insulation Thickness Diameter Under Armour Armour Wire Size O/D Approx Weight kg/km Minimum Bending Radius During Installation 00/00 V Cables ACM-0. 1..0. 00 0 00 ACM-0...0.0 00 0 ACM-0...0. 00 0 0 ACM-00 0.... 00 0 0 ACM-00 0.... 00 0 0 ACM-0..1.. 00 0 0 ACM-... 0.1 00 0 ACM-0 0....1 00 0 0 ACM-.... 00 0 ACM-0 0. 1... 00 0 0 ACM-00 00..0. 1. 000 0 0 ACM-00 00.0.1.. 00 0 0 0/100 V Cables ACW-0...0. 00 0 0 ACW-0..1.. 00 0 0 ACW-0. 0.. 0. 00 ACW-00 0....1 00 0 0 ACW-00 0....1 00 0 0 ACW-0. 0.. 1. 00 0 0 ACW-..0..0 00 0 0 ACW-0 0....0 00 0 0 ACW-. 0... 10 0 0 ACW-0 0....0 00 0 0 ACW-00 00. 1.0.. 00 0 0 ACW-00 00..0. 0. 00 10 00/000 V Cables ADH-0.... 000 0 0 ADH-0....1 00 0 0 ADH-00 0.... 0 0 ADH-00 0..1.. 0 0 0 ADH-0..0..0 00 0 ADH-... 0. 00 0 ADH-0 0.... 00 0 0 ADH-.... 00 0 00 ADH-0 0. 1... 00 0 0 ADH-00 00... 0.1 00 0 ADH-00 00.... 000 0 Adjacent to joints and Termination 1 1 1 0 01 1
1 /./ kv PE/PVC Airfield Lighting Cable 1 1 Application For use in underground installations for airfield lighting. Specifications In accordance with D.O.E. (Department of the Environment) Spec M&E and BAA (British Airports Authority) Spec * ENG/0/CEE kv only s: Stranded Class copper conductors to BS EN 0 Insulation: Polythene insulation Type 0 to BS Sheath: PVC sheath Type TM.1 to BS Flame retardant to BS EN 0-1- Various colours available upon request Temperature Rating: 0 C maximum conductor operating temperature Voltage Rating: 000 V/00 V/000 V * Embossing will state either M&E spec. or BAA spec. Standard stock is M&E spec. 0 01
Anixter Number Number of Cores Stranding #/ /./ kv PE/PVC Airfield Lighting Cable -## = sheath colour, -01 = white, -0 = black, -0 = red, -0 = green, -0 = yellow, -0 = blue, -0 = brown, -0 = orange, -0 = grey, - = violet, -1 = pink. Other colours available upon request. All dimensions are nominal unless otherwise stated. Insulation Thickness O/D Approx Weight kg/km Minimum Bending Radius (fixed bend) ABB-0-## 1 /1.0.. 0 000 ABB-00-## 1 /1.0.. 0 00 ABB-00-## 1 /1.0.. 0 000 Voltage Rating Volts 1 1 1 0 01
1 Flat Twin and Flat Three Core LSF B and B Insulated and sheathed with uninsulated circuit protective conductor as option Application LSF insulated and sheathed cable for installation clipped to flat surfaces, or embedded in plaster, etc. For domestic and industrial wiring. 1 1 Specifications In accordance with BS s: Solid Class 1 (up to. ) and stranded Class (above. ) copper conductors to BS EN 0 Insulation: XLPE insulation Type GP to BS Core Identification: core - brown, blue core - brown, black, grey Position of protective conductor: Twin - centrally placed between brown and blue cores Three core - centrally placed between black and grey cores Outer Sheath: LSF Sheath Type LTS to BS Flame retardant to BS EN 0-1- Temperature Rating: 0 C maximum conductor operating temperature Voltage Rating: 00/00 V 0 01
Anixter Number B - Flat Twin Area Flat Twin and Flat Three Core LSF B and B Insulated and sheathed with uninsulated circuit protective conductor as option Class For further technical information see page 1:0. For conductor short-circuit ratings see page 0:. Insulation Thickness Minimum O/D Maximum O/D Approx Weight B-00 1.0 1 0..0 x.. x. B-00 1. 1 0.. x.0. x. 0 B-00. 1 0.. x.. x. 0 B-000 0.. x.. x. 0 0 B-000 0.. x..0 x 1.0 0 0 B-00 0.. x 1.0. x.0 0 B-00 0..0 x..0 x. 0 - Flat Three Core B-00 1.0 1 0..0 x.. x. 0 B-00 1. 1 0.. x.. x. 0 0 B-00. 1 0.. x.. x 1. 0 0 B-000 0.. x 1.. x. 0 0 B-000 0.. x.0.0 x.0 00 0 B-00 0.. x.0. x. 0 0 B-00 0..0 x.0.0 x. 00 0 Anixter Number Area Class Insulation Thickness Minimum O/D Maximum O/D Nom Earth Area kg/km Approx Weight Min Bending Radius (fixed bend) kg/km B - Flat Twin + Earth B-00 1.0 1 0..1 x..0 x.1 1.0 B-00 1. 1 0.. x.1. x. 1.0 B-00. 1 0.. x..0 x. 1. 0 B-000 0.. x.. x 1. 1. 0 B-000 0.. x 1.0. x.. 0 0 B-00 0.. x.. x. 0 0 B-00 0.. x.0.1 x 0. 0 0 B - Flat Three Core + Earth B-00 1.0 1 0..1 x.0.1 x 1.1 1.0 0 B-00 1. 1 0.. x.. x 1. 1.0 1 0 B-00. 1 0.. x 1.0.0 x. 1.0 0 0 B-000 0.. x.0. x. 1. 0 B-000 0.. x.. x.. 0 0 B-00 0.. x.. x. 0 0 B-00 0.. x..1 x. 0 0 Min Bending Radius (fixed bend) 1 1 1 0 01
1 Solar Cable 1 1 0 Application Used on both off-grid applications or grid connected PV-Systems. Construction Insulation Sheath Colour Anixter Number Tinned copper fine strands. Polyolefin Copolymer electron-beam cross-linked. Polyolefin Copolymer electron-beam cross-linked. Black. Technical Specification Voltage 00/00 V a.c., 00/00 V d.c. Test Voltage 000 V 0Hz, min. Temperature Rating -0 C to + C. Ambient Temperature > years (TÜV). -0 C to + 0 C. -0 F to + F. Bending Radius x outer diameter. Standards/Material Properties Fire Performance IEC 0-1-. Smoke Emissions IEC, EN 0-. Low Fire Load DIN 00. Approvals TÜV PfG /0.00 PV1-F. Application Standards NFPA 0 (National Electrical Code). Area Diameter Advantages High temperature resistance, the materials do not melt or flow Electron-beam cross-linked compounds UV and ozone resistant Hydrolysis resistant Good cold flexibility Very long life cycle Compatible to all popular connectors Tested and Certified Studer cable has both TÜV approval for the European market and UL approval according to the latest NEC specifications (National Electrical Code/UL Outline 0). Features and Benefits The double insulated, electron-beam cross-linked cables meets the highest requirements for solar cables in the most important photovoltaic markets of Europe and the USA and can be used unrestrictedly as a modular or connecting cable. The cables meet the same high expectations that are demanded from the solar modules - which are longevity and high weather resistance. Outer Diameter PV-SOLAR-1C-.MM..1. PV-SOLAR-1C-MM.. 0 PV-SOLAR-1C-MM.. PV-SOLAR-1C-MM..0 Approx Cable Weight kg/km 01
01
1 1 1 0 Technical Information Single-Core PVC Single-Core PVC/PVC (00/00 V) Single-Core PVC/PVC (1Y Types - 00/00 V) Single-Core PVC/PVC (1Y Types - 0/0 V) CURRENT - CARRYING CAPACITY (Amperes): Cross Sectional Area Reference Method A (enclosed in conduit in thermally insulating wall etc) Cables, Single Phase a.c. or d.c. or Cables Three Phase a.c. Reference Method B (enclosed in conduit on a wall or in trunking etc) Cables, Single Phase a.c. or d.c. or Cables Three Phase a.c. Reference Method C ( clipped direct ) Cables, Single Phase a.c. or d.c. Flat and Touching 1 A A A A A A 1. 1. 1. 1.. 1... 0. 0.0 1 1 1 0 1 0 1 1 1 1 0 1 1 0 1 1 0 1 0 0 0 0 00 1 1 00 0 1 00 00 00 - - 00 - - 0 - - 0 0 00 - - - - 0 00 - - - - or Cables Three Phase a.c. Flat and Touching or Trefoil 01
Technical Information If cables are to be used in ambient air temperatures other than 0 C the following rating factors should be applied: Ambient air temp C 0 0 0 0 Rating factor 1.0 1.0 0. 0. 0. 0.1 0.1 0.0 1 Reference Method F (in free air or on perforated cable tray horizontal or vertical) Cables, Single Phase a.c. or d.c. flat and Touching or Cables Three Phase a.c. Flat and Touching Reference Method F (in free air or on perforated cable tray horizontal, vertical or trefoil) Horizontal Flat Spaced Vertical Flat Spaced Trefoil Cables, Single Phase a.c. or d.c. or Cables Three Phase a.c. Cables, Single Phase a.c. or d.c. or Cables Three Phase a.c. Three Phase a.c. 1 A A A A A - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1 1 1 1 1 0 1 1 0 0 1 0 0 0 0 1 0 0 0 1 0 0 1 1 1 1 0 Cables Trefoil Three Phase a.c. 1 1 0 01
1 1 1 Technical Information Single-Core PVC Single-Core PVC/PVC (00/00 V) Single-Core PVC/PVC (1Y Types - 00/00 V) Single-Core PVC/PVC (1Y Types - 0/0 V) VOLTAGE DROP (per Ampere per metre): Cross Sectional Area cables d.c. Reference Methods A & B (enclosed in conduit etc in or on a wall) Cables - Single Phase a.c. Reference Methods C & F (clipped direct or on trays, touching) 1 Reference Method C & F (spaced*) mv mv mv mv 1 1.............. r x z r x z r x z 1. 1.0 0. 1.0 1. 0.0 1. 1. 0. 1.0 1. 1.0 0.1 1.0 1. 0. 1. 1. 0. 1.0 0 0. 0. 0.0 1.00 0. 0. 0. 0. 0. 0. 0 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0.0 0.0 0. 0. 0. 0. 0. 0. 0. 0. 0. 0.1 0. 0. 0. 0 0. 0.1 0. 0.1 0.0 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0.0 0. 0. 0. 0. 0 0. 0. 0. 0. 0. 0. 0. 0. 0. 0.1 00 0. 0. 0. 0.1 0. 0. 0. 0.0 0. 0. 00 0. 0.1 0. 0. 0.1 0.0 0.0 0.1 0. 0. 00 0.0 0. 0. 0. 0.0 0. 0. 0.0 0. 0. 0 0.0 0.0 0. 0. 0.01 0. 0. 0.0 0. 0. 00 0.0 - - - 0.0 0.0 0. 0.01 0. 0. 00 0.0 - - - 0.0 0.0 0.0 0.00 0. 0. 0 01 0
Technical Information 1 Reference Methods A & B (enclosed in conduit etc in or on wall) Reference Methods C & F (in trefoil) or Cables - Three Phase a.c. Reference Methods C & F (flat touching) For further guidance refer to the BS1 (IEE Wiring Regulations - latest edition). * spaced by one cable diameter. Reference Methods C & F (flat spaced*) mv mv mv mv................ r x z r x z r x z r x z 1.0 0. 1. 1.0 0. 1.0 1.0 0. 1. 1.0 0. 1. 1. 0. 1. 1. 0.0 1. 1. 0. 1. 1. 0. 1. 0.1 0. 0. 0.0 0. 0. 0.0 0. 0. 0.0 0. 0. 0. 0. 0.1 0. 0.0 0. 0. 0. 0.0 0. 0.1 0. 0. 0. 0. 0.1 0. 0. 0.1 0. 0. 0.0 0.1 0.1 0. 0. 0.1 0. 0.0 0. 0. 0. 0.0 0. 0.0 0. 0. 0. 0. 0. 0.0 0.0 0. 0. 0. 0. 0.0 0.0 0. 0. 0. 0.1 0. 0. 0.1 0. 0.1 0.1 0.0 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0.1 0.0 0. 0.1 0. 0. 0.1 0. 0. 0.1 0. 0. 0. 0. 0. 0. 0.1 0. 0. 0. 0.1 0. 0. 0. 0.0 0. 0. 0.0 0.1 0. 0.01 0. 0.0 0.0 0. 0. 0.0 0. 0. 0.0 0.1 0. 0.0 0. 0. - - - 0.0 0. 0. 0.0 0.1 0. 0.0 0. 0. - - - 0.0 0. 0.0 0.0 0.0 0.1 0.0 0. 0. 1 1 0 01 1
1 1 1 Technical Information Flat Twin, Flat Twin & Earth Flat Three core, Flat Three core & Earth Multicore PVC-insulated flat cables, non-armoured, with or without protective conductor (copper conductors) BS00 - Flat Twin, Flat Three core Ambient temperature: 0 C. operating temperature: 0 C CURRENT - CARRYING CAPACITY (Amperes) Cross Sectional Area Reference Method 0# (above a plasterboard ceiling covered by thermal insulation NOT EXCEEDING 0 in thickness) Reference Method 1# (above a plasterboard ceiling covered by thermal insulation EXCEEDING 0 in thickness) Reference Reference Method # (in a stud wall with thermal insulation with cable TOUCHING the inner wall surface) Method # (in a stud wall with thermal insulation with cable NOT TOUCHING the inner wall surface) Reference Method C* (clipped direct) 1 (A) (A) (A) (A) (A) (A) 1 1. 1. 1. 1 0.. 1 1 1. 0... Reference Method A* (enclosed n conduit in an insulated wall) A* For full installation method refer to Table A Installation Method but for flat twin and earth cable C* For full installation method refer to Table A Installation Method 0 but for flat twin and earth cable 0# For full installation method refer to Table A Installation Method 0 1# For full installation method refer to Table A Installation Method 1 # For full installation method refer to Table A Installation Method # For full installation method refer to Table A Installation Method Wherever practicable, a cable is to be fixed in a position such that it will not be covered with thermal insulation. Regulation., BS 0-: Appendix C: Avoidance of overheating of electric cables. Building Regulations Approved document B and Thermal insulation: avoiding risks, BR, BRE, 001 refer. 0 01
Technical Information 1 VOLTAGE DROP (per Ampere per metre): Cross Sectional Area Two Core Cable d.c. Two Core Cable Single Phase a.c. 1 mv mv mv 1 1............ If cables are to be used in ambient air temperatures other than 0 C the following rating factors should be applied: Ambient air temp C 0 0 0 0 Rating factor 1.0 1.0 0. 0. 0. 0.1 0.1 0.0 0. For further guidance refer to BS1 (IEE Wiring Regulations - latest edition). * With or without protective conductor. Three or Four Core Cable Three Phase a.c. 1 1 0 01
1 Technical Information Single-Core LSF Single-Core XLPE/PVC, XLPE/LSF (1) Types 00/00 V 1 1 CURRENT - CARRYING CAPACITY (Amperes): Cross Sectional Area Reference Method A (enclosed in conduit in thermally insulating wall etc) Cables, Single Phase a.c. or d.c. or Cables Three Phase a.c. Reference Method B (enclosed in conduit on a wall or in trunking etc) Cables, Single Phase a.c. or d.c. or Cables Three Phase a.c. Reference Method C ( clipped direct ) Cables, Single Phase a.c. or d.c. Flat and Touching 1 A A A A A A 1 1. 1. 0. 1 1 1 1 0 1 1 1 0 1 1 1 1 0 1 0 0 00 1 0 1 1 0 00 0 0 0 0 00 0 1 00 - - 00 - - 0 0 0 - - 00 1 00 - - - - 00 - - - - 1 or Cables Three Phase a.c. Flat and Touching or Trefoil 0 01
For ambient air temperatures other than 0 C, the following rating factors should be applied: Technical Information Ambient air temp C 0 0 0 0 0 0 Rating factor 1.0 1.0 0. 0.1 0. 0. 0. 0.1 0. 0. 0.0 0.1 0. 1 Reference Method F Reference Method G (Free air) (on a perforated cable tray horizontal or vertical) Horizontal Flat Spaced Vertical Flat Spaced Trefoil Cables, Single Phase a.c. or d.c. Flat and Touching or Cables Three Phase a.c. Flat and Touching Cables, Single Phase a.c. or d.c. or Cables Three Phase a.c. Cables, Single Phase a.c. or d.c. or Cables Three Phase a.c. 1 A A A A A - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1 1 1 00 01 0 0 00 00 0 1 0 1 0 0 0 0 0 1 1 0 1 Cables Trefoil Three Phase a.c. Ratings shown in Column 1, also apply to cables in trefoil formation on a perforated cable tray, Reference Method F. 1 1 0 01
1 1 1 0 Technical Information Single-Core LSF Single-Core XLPE/PVC, XLPE/LSF (1) Types 00/00 V Continued... VOLTAGE DROP (per Ampere per metre): Cross Sectional Area cables d.c. *Spaced by one cable diameter. Reference Methods A & B (enclosed in conduit etc in or on a wall) Cables - Single Phase a.c. Reference Methods C, F & G (clipped direct or on trays, touching) 1 Reference Method C, F & G (spaced*) mv mv mv mv 1 1. 1 1 1 1. 1 1 1 1............ r x z r x z r x z 1. 1. 0.1 1.0 1. 0. 1. 1. 0. 1. 1. 1. 0. 1. 1. 0. 1. 1. 0. 1. 0 0. 1.00 0. 1.0 0. 0. 1.00 0. 0. 1.00 0 0. 0.0 0. 0. 0. 0. 0.1 0. 0. 0. 0. 0.1 0. 0. 0. 0.0 0. 0. 0. 0. 0. 0.1 0. 0. 0. 0. 0. 0. 0. 0. 0 0. 0. 0. 0. 0. 0. 0. 0. 0. 0.1 0. 0. 0. 0. 0. 0. 0.0 0. 0. 0. 0 0. 0.1 0. 0. 0.0 0.0 0. 0. 0. 0.1 00 0. 0. 0. 0.1 0. 0.0 0. 0. 0. 0. 00 0. 0.0 0. 0. 0.1 0. 0.0 0. 0. 0. 00 0.0 0.1 0. 0. 0. 0. 0. 0.0 0. 0. 0 0.0 0. 0. 0. 0.0 0. 0. 0.0 0. 0. 00 0.0 - - - 0.0 0.0 0.0 0.0 0. 0. 00 0.0 - - - 0.0 0.0 0. 0.0 0. 0. 01
Technical Information 1 Reference Methods A & B (enclosed in conduit etc in or on wall) Reference Methods C, F & G (in trefoil) or Cables - Three Phase a.c. Reference Methods C, F & G (flat touching) For further guidance refer to the BS1 (IEE Wiring Regulations - latest edition). Reference Methods C, F & G (flat spaced*) mv mv mv mv 0 0 0 0........ r x z r x z r x z r x z 1.0 0. 1. 1.0 0. 1.0 1.0 0. 1.0 1.0 0. 1. 1. 0. 1. 1. 0. 1. 1. 0. 1. 1. 0. 1.0 0. 0. 0.0 0. 0. 0. 0. 0. 0. 0. 0. 0. 0.0 0. 0. 0. 0.0 0.1 0. 0. 0. 0. 0. 0. 0. 0. 0.0 0. 0. 0. 0. 0.0 0. 0. 0. 0. 0. 0. 0. 0. 0.0 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0.0 0.1 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0.0 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0.0 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0.0 0. 0. 0.0 0.1 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0.0 0. 0. 0. 0. 0. 0. 0. 0.0 0. 0. 0.0 0.0 0.0 0.0 0. 0. 0.0 0.1 0. 0.0 0. 0.0 0.01 0.0 0.0 0.0 0. 0. - - - 0.0 0. 0. 0.0 0. 0. 0.0 0. 0. - - - 0.0 0. 0.0 0.00 0. 0. 0.0 0. 0. 1 1 0 01
1 Technical Information XLPE/PVC/AWA/PVC Single-Core XLPE/LSF/AWA/LSF 00/00 V 1 1 0 CURRENT - CARRYING CAPACITY (Amperes): Direct Buried BS cables cables Area Touching Spaced Trefoil Touching Spaced Arm d Arm d Arm d Arm d Arm d 0 1 1 0 0 0 0 0 1 1 0 0 1 0 1 00 0 01 00 0 1 1 00 0 0 01 1 1 00 0 0 00 0 Air BS & BS cables Area Horizontally Spaced Vertically Spaced Trefoil Unarm d Arm d Unarm d Arm d Unarm d Arm d 0 0 1 0 0 0 1 0 0 0 0 1 0 00 1 00 1 1 00 1 1 0 1 1 1 00 1 00 0 01
Technical Information 1 Standard depth of laying 0.m Thermal resistivity of soil 1. C m/w Standard ground temperature C Ambient air temperature C Maximum conductor temperature 0 C In Single-Way Duct BS cables cables Area Flat Trefoil Flat Arm d Arm d Arm d 0 1 0 0 0 0 0 0 0 00 00 00 1 0 1 00 0 00 For further guidance refer to the BS1 (IEE Wiring Regulations - latest edition) and ERA -0 Part. Ratings do not apply if the cable is protected by a semi-enclosed fuse to BS0. 1 Vertically Spaced cables Horizontally Spaced 1 Unarm d Arm d Unarm d Arm d 0 1 1 0 0 0 0 0 1 0 1 Continued overleaf... 0 01
1 1 1 Technical Information XLPE/PVC/AWA/PVC Single-Core XLPE/LSF/AWA/LSF 00/00 V For ambient air and ground temperatures other than those specified, the following rating factors should be applied: Cables laid in air: Ambient air temp C 0 0 0 Rating factor 1.0 0. 0. 0. 0. 0. 0. Cables laid direct in ground and in single-way ducts: Ground temp C 0 0 0 Rating factor 1.0 1.0 0. 0. 0. 0. 0. VOLTAGE DROP (per Ampere per metre): Cables - Single Phase a.c. Cross Sectional Area Cables d.c. Reference Methods 1 & (touching) 1 * spaced by one cable diameter. Reference Methods 1 (spaced*) mv mv mv r x z r x z 0 0. 0. 0.1 1.00 0. 0. 1.00 0 0. 0. 0.00 0.1 0. 0. 0. 0. 0.1 0. 0. 0. 0. 0.0 0. 0.1 0.0 0. 0. 0. 0.1 0 0.1 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0.0 0. 0.0 0 0. 0.1 0.0 0. 0. 0. 0. 00 0. 0.0 0. 0. 0. 0. 0. 00 0.1 0. 0.0 0. 0.0 0. 0.0 00 0.0 0. 0.0 0.1 0. 0. 0. 0 0.0 0. 0. 0. 0.0 0. 0. 00 0.0 0.00 0.0 0.0 0. 0. 0. 00 0.0 0.0 0. 0.0 0.0 0.1 0. 0 01 0
Technical Information 1 or Cables - Three Phase a.c. Reference Methods 1, &1 (in trefoil touching) Reference Methods 1 & (flat touching) Reference Methods 1 (flat spaced*) mv mv mv r x z r x z r x z 0. 0.0 0. 0. 0. 0. 0. 0. 0.0 0. 0.0 0. 0.0 0. 0. 0. 0. 0.0 0. 0.0 0. 0. 0. 0. 0. 0.1 0. 0. 0. 0. 0. 0. 0. 0.1 0.0 0.1 0. 0.0 0. 0.1 0. 0. 0. 0. 0. 0. 0.0 0. 0. 0. 0. 0. 0. 0.1 0.0 0. 0. 0.1 0. 0.0 0. 0. 0. 0. 0.0 0.1 0.0 0. 0. 0.0 0. 0. 0. 0.0 0. 0.0 0.1 0. 0.0 0. 0. 0. 0. 0.0 0. 0.0 0. 0.0 0. 0.1 0.0 0. 0.0 0. 0. 0. 0. 0. 0. 0.0 0.0 0. 0. 0.0 0. 0. 0. 0. 0.00 0. 0. 0. 0.0 0.1 0. 0.0 0. 1 1 0 01 1
1 1 1 Technical Information Single-Core XLPE/PVC 00/00 V to BS & XLPE/LSF 00/00 V Single-Core PCU/XLPE/PVC/AWA/PVC 00/00 V to BS Single-Core PCU/XLPE/LSF/AWA/LSF 00/00 V to BS ELECTRICAL CHARACTERISTICS Size Maximum d.c. Resistance @ 0ºC Maximum a.c. Resistance @ 0ºC Reactance @ 0Hz Single-Core Cables in Trefoil Impedance @ 0ºC, 0Hz Single-Core Cables in Trefoil Unarm d Arm d Unarm d Arm d Unarm d Arm d ohms/km ohms/km ohms/km ohms/km ohms/km ohms/km ohms/km 0 0. 0. 0. 0.00 0. 0.0 0.0 0 0. 0. 0. 0.01 0.1 0. 0. 0. 0. 0. 0.0 0.0 0.1 0. 0. 0. 0. 0.0 0.00 0.1 0. 0 0. 0.0 0.0 0.0 0.0 0.0 0. 0.01 0. 0. 0.01 0.0 0. 0. 0 0.0 0.00 0.0 0.0 0.00 0. 0. 00 0.001 0.00 0.0 0.00 0.0 0. 0.1 00 0.00 0.0 0.0 0.0 0.0 0.1 0. 00 0.0 0.0 0.01 0.0 0.00 0.0 0.1 0 0.0 0.00 0.00 0.0 0.0 0.00 0.0 00 0.01 0.0 0.0 0.0 0.00 0.01 0.0 00 0.0 0.0 0.00 0.00 0.00 0.0 0.0 0 01
01
1 1 1 0 Technical Information Multicore XLPE/PVC/SWA/PVC 00/00 V Multicore XLPE/LSF/SWA/LSF 00/00 V Multicore XLPE/LC/PVC/SWA/PVC 00/00 V CURRENT CARRYING CAPACITY (Amperes) Direct Burial Area In Single-Way Duct Core & Core Area Core & Core Arm d Arm d Arm d Arm d 1. 1. 1.. 1 1 1 1 1 0 0 0 0 0 1 1 00 0 0 0 01 0 0 00 0 00 00 00 0 Standard depth of laying 0.m Thermal resistivity of soil 1. C m/w Standard ground temperature C Ambient air temperature C Maximum conductor temperature 0 C core - single phase a.c. & core - three phase a.c. Ratings do not apply if the cable is protected by a semi-enclosed fuse to BS0. For further guidance refer to the BS1 (IEE Wiring Regulations - latest edition) and ERA publication -0 Part. & core ratings also apply to core cables. 01
Technical Information 1 Area Core & Core Arm d Arm d 1. 1. 1 0 0 0 0 0 0 0 0 0 0 0 00 00 For cables of five core and above it is assumed only two cores are loaded simultaneously (i.e. live and neutral) and the two core rating should be taken. In instances where several cores are loaded simultaneously, the following rating factors should be applied to the two core current rating: Number of cores 1 Factor 1.0 0. 0. 0. 0. 0. 0. 0. Number of cores 0 Factor 0.1 0. 0. 0. 0. 0. 0. 0. 0. Air 1 1 0 01
1 Technical Information XLPE/PVC/SWA/PVC XLPE/LSF/SWA/LSF XLPE/LC/PVC/SWA/PVC 00/00 V operating temperature 0 C NB. for ambient air and ground temperatures other than those specified the following rating factors should be applied: Cables Laid in Air Ambient air temp C 0 0 0 Rating factor 1.0 0. 0. 0. 0. 0. 0. Cables laid direct in ground and in single-way ducts Ground temp C 0 0 0 Rating factor 1.0 1.0 0. 0. 0. 0. 0. 1 1 0 VOLTAGE DROP (per Ampere per metre): Cross Sectional Area Core Cable d.c. Core Cable Single Phase a.c., or Core Cable Three Phase a.c. 1 mv mv mv 1. 1 1. 1 1......0... r x z r x z 1. 1. 0.0 1.0 1.0 0.0 1. 1. 1. 0. 1. 1. 0. 1. 0 0. 0. 0. 1.00 0. 0. 0. 0 0. 0. 0.0 0. 0. 0. 0.0 0. 0.0 0.0 0. 0. 0. 0. 0. 0.0 0. 0. 0. 0. 0. 0 0.1 0. 0. 0. 0. 0. 0.0 0. 0. 0. 0. 0. 0. 0. 0 0. 0.0 0.0 0. 0. 0. 0.1 00 0. 0. 0.0 0.1 0.0 0. 0. 00 0. 0.1 0. 0. 0.1 0. 0.0 01
Technical Information 1 Multicore PCU/XLPE/PVC 00/00V to BS Multicore PCU/XLPE/PVC/SWA/PVC 00/00 V to BS Multicore PCU/XLPE/LSF/SWA/LSF 00/00 V to BS Multicore PCU/XLPE/LC/PVC/SWA/PVC 00/00 V ELECTRICAL CHARACTERISTICS Size Maximum d.c. Resistance @ 0ºC ohms/km Maximum a.c. Resistance @ 0ºC ohms/km Reactance @ 0Hz ohms/km Impedance @ 0ºC, 0Hz ohms/km 1. 1.1. 0....1. 0.1..0.1. 0.0..0.0. 0.0. 1.. 0.0. 1. 1. 0.0 1. 0. 0. 0.0 0.1 0. 0. 0.01 0. 0 0. 0. 0.0 0.00 0 0. 0. 0.0 0.0 0. 0. 0.0 0. 0. 0. 0.0 0. 0 0. 0.0 0.0 0. 0.01 0. 0.0 0. 0 0.0 0.0 0.0 0.1 00 0.001 0.00 0.0 0. 00 0.0 0.0 0.0 0.00 1 1 0 01
1 Technical Information BS Fire Resistant Cable Ratings do not apply if the cable is protected by a semi-enclosed fuse to BS0. For further guidance refer to the BS1 (IEE Wiring Regulations - latest edition). For cables of five core and above it is assumed only two cores are loaded simultaneously (i.e. live and neutral) and the two core rating should be taken. For ambient air temperatures other than 0 C, the following factors should be applied. Ambient air temp C 0 0 0 Rating factor 1.0 0. 0. 0. 0.1 0.1 0.0 0. 1 1 0 01
CURRENT CARRYING CAPACITY (Amperes) & VOLTAGE DROP (per Ampere per metre) Cross Sectional Area of Current Carrying Capacity One Twin Cable a.c. or d.c. Ambient air temperature 0 C operating temperature 0 C ( Enclosed ) in Trunking Volt Drop per amp per m One or Core Cable Phase a.c. Current Carrying Capacity Volt Drop per amp per m Installation Method Current Carrying Capacity Technical Information One Twin Cable a.c. or d.c. Volt Drop per amp per m Clipped Direct One or Core Cable Phase a.c. Current Carrying Capacity A mv A mv A mv A mv 1.0 1. 1. 1..... 0.0 0.. Volt Drop per amp per m 1 ADDITIONAL TECHNICAL INFORMATION ON BS CABLES Size Capacitance Core-Core pf/m Capacitance Core-Screen pf/m 1.0 0 1. 0 0. 1 0 0.0 0 L/R Ratio µh/ω 1 1 0 01
1 1 1 Technical Information Fire Resistant Armoured Cables to BS 00/00 V For further guidance refer to the BS1 (IEE Wiring Regulations - latest edition). For cables of seven core and above it is assumed only two cores are loaded simultaneously (i.e. live and neutral) and the two core rating should be taken. For ambient air temperatures other than 0 C, the following factors should be applied. Ambient air temp C 0 0 0 0 0 0 Rating factor 1.0 1.0 0. 0.1 0. 0. 0. 0.1 0. 0. 0.0 0.1 VOLTAGE DROP (per Ampere per metre): Cross Sectional Area of One Twin a.c. mv mv mv 1. 1 1. 1 1......0... 1.0 1. 1. 1. 1. 1. 0 1.00 0. 0. 0 0. 0. 0.0 0. 0. 0. 0. 0. 0. 0 0. 0.1 0.0 0. 0. 0. 0 0. 0. 0.1 00 0.1 0. 0. 00 0. 0. 0. d.c. One or Core Cable Phase a.c. 0 01 0
Technical Information 1 CURRENT CARRYING CAPACITY (Amperes) Cross Sectional Area of In Free Air or on Perforated Cable Tray Installation Method Clipped Direct operating temperature 0 C Ambient air temperature 0 C One Twin Cable a.c. or d.c. One, or Core Cable Phase a.c. One Twin Cable a.c. or d.c. One, or Core Cable Phase a.c. A A A A 1.. 1 0 1 1 0 0 0 1 1 0 0 0 1 1 0 0 0 00 00 If ratings for these cables buried direct in ground or in single-way duct are required, refer to ratings for XLPE/SWA cables detailed on page 1:. 1 1 0 01 1
1 Technical Information 1./. kv 1 core & cores XLPE Insulated, Armoured Cables BS & BS For further guidance refer to the BS1 (IEE Wiring Regulations - latest edition) and ERA -0 Part. For ambient air and ground temperatures other than those specified, the following factors should be applied. Cables laid in air Ambient air temp C 0 0 0 Rating factor 1.0 0. 0. 0. 0. 0. 0. Cables laid direct in ground and in single-way ducts Ground temp C 0 0 0 Rating factor 1.0 1.0 0. 0. 0. 0. 0. 1 1 0 CURRENT CARRYING CAPACITY (Amperes) Single-Core 00/00 V 0Hz Direct Buried - BS In Single-Way Duct - BS Trefoil Cables Spaced Cables Area Touching Trefoil Flat Arm d Arm d Arm d Arm d Arm d 0 1 0 0 0 0 1 0 1 1 1 0 0 0 0 0 0 0 1 1 0 00 0 00 0 0 00 1 00 00 0 1 00 0 0 00 1 0 00 0 00 0 0 00 01
CURRENT CARRYING CAPACITY (Amperes) Core 00/00 V 0Hz XLPE/PVC/SWA/PVC, XLPE/LSF/SWA/LSF Technical Information Direct Buried - BS In Single-Way Duct - BS Air - BS & BS Area Core Area Core Area Core Arm d Arm d Arm d 1 0 0 0 0 1 0 0 0 0 0 0 0 0 1 0 0 0 0 00 00 0 00 00 00 00 1 Area XLPE/PVC/AWA/PVC XLPE/LSF/AWA/LSF Air - BS & Trefoil Cables Vertical Spaced Arm d Arm d Arm d 0 0 0 00 0 1 0 0 0 00 1 00 1 00 0 0 00 0 00 Horizontally Spaced Standard depth of laying 0.m Thermal resistivity of soil 1. C m/w Standard ground temperature C Ambient air temperature C Maximum conductor temperature 0 C 1 1 0 01
1 1 Technical Information Single-Core PCU/XLPE/PVC/AWA/PVC 00/00 V to BS Single-Core PCU/XLPE/LSF/AWA/LSF 00/00 V to BS ELECTRICAL CHARACTERISTICS Size Maximum d.c. Resistance @ 0ºC ohms/km Maximum a.c. Resistance @ 0ºC ohms/km Reactance @ 0Hz Single-Core Cables in Trefoil ohms/km Impedance @ 0ºC, 0Hz Single-Core Cables in Trefoil ohms/km 0 0. 0. 0.1 0.0 0 0. 0. 0.1 0. 0. 0. 0. 0. 0. 0. 0. 0.1 0 0. 0.0 0.0 0. 0.01 0. 0.0 0.1 0 0.0 0.0 0.0 0. 00 0.001 0.0 0.01 0. 00 0.00 0.0 0.0 0. 00 0.0 0.01 0.00 0.1 0 0.0 0.00 0.0 0.0 00 0.01 0.0 0.00 0.0 00 0.0 0.00 0.00 0.0 1 0 01
Technical Information 1 Multicore PCU/XLPE/PVC 00/00 V to BS Multicore PCU/XLPE/PVC/SWA/PVC 00/00 V to BS Multicore PCU/XLPE/LSF/SWA/LSF 00/00 V to BS ELECTRICAL CHARACTERISTICS Size Maximum d.c. Resistance @ 0ºC ohms/km Maximum a.c. Resistance @ 0ºC ohms/km Reactance @ 0Hz ohms/km Impedance @ 0ºC, 0Hz ohms/km 1. 1. 0. 1. 0. 0. 0.0 0. 0. 0. 0.01 0. 0 0. 0. 0.0 0.0 0 0. 0. 0.0 0. 0. 0. 0.01 0.0 0. 0. 0.0 0.1 0 0. 0.0 0.0 0. 0.01 0. 0.0 0. 0 0.0 0.0 0.0 0. 00 0.001 0.00 0.0 0. 00 0.0 0.0 0.0 0.0 1 1 0 01
1 1 1 Technical Information 1 and core XLPE Insulated Cables 00/00 V, 0/100 V & 00/000 V For further guidance refer to the BS1 (IEE Wiring Regulations - latest edition). NB. High voltage cables are not specifically covered in IEE Wiring Regulations but reference should be made to ensure compliance. For ambient air and ground temperatures other than those specified, the following factors should be applied. Cables laid in air Ambient air temp C 0 0 0 Rating factor 1.0 0. 0. 0. 0. 0. 0. Cables laid direct in ground and in single-way ducts Ground temp C 0 0 0 Rating factor 1.0 1.0 0. 0. 0. 0. 0. Standard depth of laying 0.m Thermal resistivity of soil 1. C m/w Standard ground temperature C Ambient air temperature C Maximum conductor temperature 0 C NOTE: All circuits thermally independent. Cables in trefoil group are solidly bonded. Cables in flat formation are single point bonded. 0 01
CURRENT CARRYING CAPACITY (Amperes) Single-Core./. kv,./ kv,./ kv 0Hz Area Direct Burial Duct Air Cables Trefoil Flat Area Spaced Technical Information Cables Cables Trefoil Flat Touching Area Trefoil Flat Spaced Arm d Arm d Unarm d Arm d Unarm d Arm d Unarm d Arm d Unarm d Arm d - - - - - - - - - - - - - - - - - - - - 0 0 0 0 0 0 0 0 0 00 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 00 0 0 0 00 00 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 00 0 0 00 0 00 00 0 0 0 0 00 0 0 00 0 0 0 00 0 0 10 10 00 0 00 0 0 0 0 00 0 0 0 0 0 0 0 0 0 0 0 0 0 0 00 0 Core./. kv,./ kv,./ kv 0Hz XLPE/PVC/SWA/PVC & XLPE/LSF/SWA/LSF Direct Burial In Single-Way Duct Air Core Core Core Area Area Area Arm d Arm d Arm d 0 0 0 0 0 0 0 0 0 0 0 0 00 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 00 0 00 0 00 0 00 00 00 0 00 0 1 1 1 0 01
1 Technical Information Single-Core PCU/XLPE/PVC 00/00 V to BS Single-Core PCU/XLPE/AWA/PVC 00/00 V to BS ELECTRICAL CHARACTERISTICS Size Maximum d.c. Resistance @ 0ºC Maximum a.c. Resistance @ 0ºC Reactance @ 0Hz Impedance @ 0ºC, 0Hz Single-Core Cables in Trefoil Single-Core Cables in Trefoil Unarm d Arm d Unarm d Arm d Unarm d Arm d ohms/km ohms/km ohms/km ohms/km ohms/km ohms/km ohms/km 0 0. 0. 0. 0.1 0. 0.0 0. 0 0. 0. 0. 0.1 0. 0.0 0. 0. 0. 0. 0. 0.1 0. 0. 0. 0. 0. 0.1 0.1 0.0 0. 0 0. 0. 0. 0.01 0.1 0. 0. 0.01 0. 0. 0.0 0. 0.0 0. 0 0.0 0.0 0.0 0.0 0. 0. 0. 00 0.001 0.00 0.00 0.0 0. 0.1 0. 00 0.00 0.0 0.0 0.0 0.0 0.1 0.1 00 0.0 0.0 0.0 0.0 0.0 0. 0.1 0 0.0 0.0 0.0 0.0 0.0 0.0 0. 1 1 0 Three core PCU/XLPE/PVC 00/00 V to BS Three core PCU/XLPE/PVC/SWA/PVC 00/00 V to BS ELECTRICAL CHARACTERISTICS Size Maximum d.c. Resistance @ 0ºC ohms/km Maximum a.c. Resistance @ 0ºC ohms/km Reactance @ 0Hz ohms/km Impedance @ 0ºC, 0Hz ohms/km 1. 1. 0. 1. 0. 0. 0. 0. 0. 0. 0. 0. 0 0. 0. 0. 0.0 0 0. 0. 0. 0. 0. 0. 0.0 0. 0. 0. 0.01 0. 0 0. 0. 0.00 0. 0.01 0. 0.01 0. 0 0.0 0.0 0.0 0. 00 0.001 0.00 0.0 0.1 00 0.0 0.0 0.0 0. Also applicable to LSF sheathed versions to BS. 01
Technical Information 1 Single-Core PCU/XLPE/PVC 0/100 V to BS Single-Core PCU/XLPE/AWA/PVC 0/100 V to BS ELECTRICAL CHARACTERISTICS Size Maximum d.c. Resistance @ 0ºC Maximum a.c. Resistance @ 0ºC Reactance @ 0Hz Impedance @ 0ºC, 0Hz Single-Core Cables in Trefoil Single-Core Cables in Trefoil Unarm d Arm d Unarm d Arm d Unarm d Arm d ohms/km ohms/km ohms/km ohms/km ohms/km ohms/km ohms/km 0 0. 0. 0. 0. 0. 0.0 0.1 0 0. 0. 0. 0.1 0. 0.1 0. 0. 0. 0. 0.1 0.1 0.0 0. 0. 0. 0. 0. 0.1 0. 0. 0 0. 0. 0. 0. 0.1 0.0 0. 0.01 0. 0. 0.0 0. 0. 0. 0 0.0 0.00 0.0 0.0 0. 0. 0. 00 0.001 0.000 0.00 0.00 0. 0.1 0. 00 0.00 0.00 0.0 0.01 0.1 0.1 0.1 00 0.0 0.0 0.01 0.0 0.0 0. 0. 0 0.0 0.00 0.0 0.0 0.0 0.0 0. Three core PCU/XLPE/PVC 0/100 V to BS Three core PCU/XLPE/PVC/SWA/PVC 0/100 V to BS ELECTRICAL CHARACTERISTICS Size Maximum d.c. Maximum a.c. Reactance @ 0Hz Impedance @ Resistance @ 0ºC Resistance @ 0ºC 0ºC, 0Hz ohms/km ohms/km ohms/km ohms/km 1. 1. 0. 1. 0. 0. 0. 0. 0. 0. 0. 0. 0 0. 0. 0.1 0.0 0 0. 0. 0. 0.0 0. 0. 0. 0. 0. 0. 0.0 0.0 0 0. 0. 0.0 0. 0.01 0. 0.01 0. 0 0.0 0.0 0.00 0. 00 0.001 0.00 0.0 0.1 00 0.0 0.0 0.0 0. Also applicable to LSF sheathed versions to BS. 1 1 0 01
1 Technical Information 00/00 V XLPE/LSF 0 C, B/B CURRENT RATING & VOLTAGE DROP Size Reference Method B (enclosed in conduit/ trunking etc) Single Phase a.c./d.c. Three Phase a.c. Reference Method C (clipped direct) Single Phase a.c./d.c. Three Phase a.c. Reference Method E (in cable tray/free air) Single Phase a.c./d.c. Three Phase a.c. Single Phase a.c./d.c. Voltage Drop Three Phase a.c./d.c. A A A A A A mv/a/m mv/a/m 1.. 1. 0 0.0 0 0 1.0 1.. 0 0 1..0 1 0 1 0.. 1 1 1. 1. 1 1 Ambient air temperature: 0 C operating temperature: 0 C For ambient temperatures other than 0 C, the following factors should be applied: Ambient air temp C 0 0 0 0 Rating factor 1.0 1.0 1.0 0. 0.1 0. 0. 0. 0 01 0
Technical Information 1 ELECTRICAL CHARACTERISTICS Size Maximum d.c. Resistance @ 0ºC ohms/km Maximum a.c. Resistance @ 0ºC ohms/km Electrical Characteristics Reactance @ 0Hz ohms/km 1. 1.1. 0....1. 0.1..0.1. 0.0..0.0. 0.0. 1.. 0.0. 1. 1. 0.0 1. Impedance @ 0ºC, 0Hz ohms/km 1 1 0 01 1
01