Input Rectifier Diode, 20 A

Transcription

1 2ETS...SPbF High Voltage Series Input Rectifier Diode, 2 A Vishay High Power Products Base cathode 2 3 D 2 PAK Anode Anode PRODUCT SUMMARY V F at A < V I FSM 3 A V RRM 8 V/2 V DESCRIPTION/FEATURES The 2ETS...SPbF rectifier High Voltage Series has been optimized for very low forward voltage drop, with moderate leakage. The glass passivation technology used has reliable operation up to 5 C junction temperature. Typical applications are in input rectification and these products are designed to be used with Vishay HPP switches and output rectifiers which are available in identical package outlines. This product series has been designed and qualified for industrial level. Compliant to RoHS directive 22/95/EC. Halogen-free according to IEC definition. OUTPUT CURRENT IN TYPICAL APPLICATIONS APPLICATIONS SINGLE-PHASE BRIDGE THREE-PHASE BRIDGE UNITS Capacitive input filter T A = 55 C, T J = 25 C common heatsink of C/W A MAJOR RATINGS AND CHARACTERISTICS SYMBOL CHARACTERISTICS VALUES UNITS I F(AV) Sinusoidal waveform 2 A V RRM 8/2 V I FSM 3 A V F 2 A, T J = 25 C. V T J - 4 to 5 C VOLTAGE RATINGS PART NUMBER V RRM, MAXIMUM PEAK REVERSE VOLTAGE V V RSM, MAXIMUM NON-REPETITIVE PEAK REVERSE VOLTAGE V 2ETS8SPbF 8 9 2ETS2SPbF 2 3 I RRM AT 5 C ma ABSOLUTE MAXIMUM RATINGS PARAMETER SYMBOL TEST CONDITIONS VALUES UNITS Maximum average forward current I F(AV) T C = 5 C, 8 conduction half sine wave 2 Maximum peak one cycle ms sine pulse, rated V RRM applied 25 A I FSM non-repetitive surge current ms sine pulse, no voltage reapplied 3 ms sine pulse, rated V RRM applied 36 Maximum I 2 t for fusing I 2 t ms sine pulse, no voltage reapplied 442 A 2 s Maximum I 2 t for fusing I 2 t t =. ms to ms, no voltage reapplied 442 A 2 s * Pb containing terminations are not RoHS compliant, exemptions may apply Document Number: 9434 For technical questions, contact: diodestech@vishay.com Revision: 7-Sep-9

2 2ETS...SPbF High Voltage Series Vishay High Power Products Input Rectifier Diode, 2 A ELECTRICAL SPECIFICATIONS PARAMETER SYMBOL TEST CONDITIONS VALUES UNITS Maximum forward voltage drop V FM 2 A, T J = 25 C. V Forward slope resistance r t.4 mω T J = 5 C Threshold voltage V F(TO).85 V T J = 25 C. Maximum reverse leakage current I RM V R = Rated V RRM T J = 5 C. ma THERMAL - MECHANICAL SPECIFICATIONS PARAMETER SYMBOL TEST CONDITIONS VALUES UNITS Maximum junction and storage temperature range T J, T Stg - 4 to 5 C Maximum thermal resistance, junction to case R thjc DC operation.3 Maximum thermal resistance, junction to ambient Typical thermal resistance, case to heatsink Approximate weight Mounting torque Marking device R thja () For D 2 PAK version 62 R thcs Mounting surface, smooth and greased.5 Note () When mounted on square (65 mm 2 ) PCB of FR-4 or G- material 4 oz. (4 µm) copper 4 C/W For recommended footprint and soldering techniques refer to application note #AN-994 C/W 2 g.7 oz. minimum 6. (5.) kgf cm maximum 2 () (lbf in) Case style D 2 PAK (SMD-22) 2ETS8S 2ETS2S For technical questions, contact: diodestech@vishay.com Document Number: Revision: 7-Sep-9

3 2ETS...SPbF High Voltage Series Input Rectifier Diode, 2 A Vishay High Power Products Maximum Allowable Case Temperature ( C) R thjc (DC) =.3 C/W 3 Conduction angle Maximum Average Forward Power Loss (W) RMS limit DC Conduction period T J = 5 C Fig. - Current Rating Characteristics Fig. 4 - Forward Power Loss Characteristics Maximum Allowable Case Temperature ( C) R thjc (DC) =.3 C/W Conduction period DC Fig. 2 - Current Rating Characteristics Peak Half Sine Wave Forward Current (A) At any rated load condition and with rated V RRM applied following surge. Initial T J = 5 C at 6 Hz.83 s at 5 Hz. s Number of Equal Amplitude Half Cycle Current Pulse (N) Fig. 5 - Maximum Non-Repetitive Surge Current Maximum Average Forward Power Loss (W) RMS limit Conduction angle T J = 5 C Fig. 3 - Forward Power Loss Characteristics Peak Half Sine Wave Forward Current (A) Maximum non-repetitive surge current versus pulse train duration. Initial T J = 5 C No voltage reapplied Rated V RRM reapplied. Pulse Train Duration (s) Fig. 6 - Maximum Non-Repetitive Surge Current Document Number: 9434 For technical questions, contact: diodestech@vishay.com Revision: 7-Sep-9 3

4 2ETS...SPbF High Voltage Series Vishay High Power Products Input Rectifier Diode, 2 A Instantaneous Forward Current (A) T J = 25 C T J = 5 C Instantaneous Forwad Voltage (V) Fig. 7 - Forward Voltage Drop Characteristics Z thjc - Transient Thermal Impedance ( C/W). Single pulse D =.5 D =.33 D =.25 D =.7 D =.8 Steady state value (DC operation)..... Square Wave Pulse Duration (s) Fig. 8 - Thermal Impedance Z thjc Characteristics For technical questions, contact: diodestech@vishay.com Document Number: Revision: 7-Sep-9

5 2ETS...SPbF High Voltage Series Input Rectifier Diode, 2 A Vishay High Power Products ORDERING INFORMATION TABLE Device code 2 E T S 2 S TRL PbF Current rating (2 = 2 A) 2 - Circuit configuration E = Single diode Package: T = TO-22AC Type of silicon: S = Standard recovery rectifier 5 - Voltage code x = V RRM 6 - S = TO-22 D 2 PAK (SMD-22) version 7 - None = Tube TRL = Tape and reel (left oriented) TRR = Tape and reel (right oriented) 8 - None = Standard production PbF = Lead (Pb)-free 8 = 8 V 2 = 2 V LINKS TO RELATED DOCUMENTS Dimensions Part marking information Packaging information Document Number: 9434 For technical questions, contact: diodestech@vishay.com Revision: 7-Sep-9 5

6 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, Vishay ), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 9 Revision: 8-Jul-8