Aluminum Electrolytic Capacitors Power Economic Printed Wiring

Save this PDF as:
 WORD  PNG  TXT  JPG

Size: px
Start display at page:

Download "Aluminum Electrolytic Capacitors Power Economic Printed Wiring"

Transcription

1 Aluminum Electrolytic Capacitors Power Economic Printed Wiring 0/0 PECPW 00/0 PEDPW Fig. QUICK REFERENCE DATA DESCRIPTION high ripple current 0/0 PECPW long life 0 C Nominal case size (Ø D x L in mm) Rated capacitance range 0 μf to (E series), μf VALUE 0 0 x 0 to 0 x 00 / PLLPW μf to 00 μf Tolerance on ± 0 % Rated voltage range, U R 0 V to 00 V 00 V to 00 V Category temperature range 0 C to + C Endurance test at C 000 h Useful life at C 000 h Useful life at 0 C,. x applied h Shelf life at 0 V, C 00 h Based on sectional specification IEC 0 / EN000 Climatic category IEC 00 0/0/ FEATURES Polarized aluminum electrolytic capacitors, nonsolid electrolyte Large types with reduced dimensions, cylindrical aluminum case, insulated with a blue sleeve Provided with keyed polarity Long useful life: 000 h at C High ripple current capability High resistance to shock and vibration Material categorization: for definitions of compliance please see APPLICATIONS General purpose, industrial, medical and audio/video systems Standard and switched mode power supplies Energy storage in pulse systems MARKING The capacitors are marked (where possible) with the following information: Rated capacitance (in μf) Tolerance on rated capacitance, code letter in accordance with IEC 00 (M for ± 0 %) Rated voltage (in V) Date code (YYMM) Name of manufacturer Code for factory of origin Polarity of the terminals and sign to indicate the negative terminal, visible from the top and/or side of the capacitor Code number Climatic category in accordance with IEC 00 SELECTION CHART FOR, U R, AND RELEVANT NOMINAL CASE SIES (Ø D x L in mm) (μf) U R (V) x 0 x 0 00 x 0 x 0 0 x 0 0 x 0 0 x 0 0 x 0 x 0 x x 0 x 0 x 0 0 x 0 0 x 0 0 x 0 0 x 0 0 x 0 x 0 x 0 0 x 0 0 x x x 0 0 x 0 0 x 00 0 x x 0 0 x 0 00 x 0 x 0 0 x 00 x 0 x 0 x x 0 00 x 0 x 0 0 x 0 0 x 0 Revision: Apr Document Number: For technical questions, contact: ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT

2 0/0 PECPW SELECTION CHART FOR, U R, AND RELEVANT NOMINAL CASE SIES (Ø D x L in mm) U R (V) (μf) x 0 x 0 0 x 0 x 0 0 x 0 x 0 x 0 0 x 0 x 0 x 0 0 x x 0 x 0 0 x 0 x 0 x 0 0 x x 0 0 x 0 x 0 x 0 0 x 0 0 x x 0 x 0 x 0 0 x 0 0 x x 0 x 0 0 x 0 0 x 0 0 x x x 0 0 x 0 0 x x 0 0 x x 00 DIMENSIONS in millimeters AND AVAILABLE FORMS. Ø D + max. 0 ± 0. L L + max..9 ± 0.. ± 0.. ( x) Fig. Printed wiring pin version (case Ø D = mm) Fig. Mounting hole diagram viewed from component side (case Ø D = mm). Ø D + max. ± 0. L + max.. ( x). ± 0..9 ± 0.. ± 0. Fig. Printed wiring pin version (case Ø D = 0 mm) Fig. Mounting hole diagram viewed from component side (case Ø D = 0 mm) Revision: Apr Document Number: For technical questions, contact: ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT

3 0/0 PECPW. Ø D + max. ± 0. L L + max..9 ± 0.. ± 0.. ± 0.. ( x) Fig. Printed wiring pin version (case Ø D = mm) Fig. Mounting hole diagram viewed from component side (case Ø D = mm). Ø D + max. 0 ± 0. L L + max. 0 ± 0.. ± 0.. ( x) 0 ± 0..9 ± 0. Fig. Printed wiring pin version (case Ø D = 0 mm) Fig. Mounting hole diagram viewed from component side (case Ø D = 0 mm) MOUNTING When a number of capacitors are connected in a bank, they must not be closer together than mm, when no derating of ripple current and / or temperature is applied. Pin number is the positive terminal. Pin is the negative terminal. Pin numbers, and (if present) should be free from the electrical circuit or connected to the minus terminal. Table DIMENSIONS in millimeters, MASS, AND PACKAGING QUANTITIES NOMINAL CASE SIE MASS PACKAGING QUANTITIES CARDBOARD BOX DIMENSIONS Ø D Ø D x L max. L max. (g) (units per box) L x W x H x x 0 x 0 x x 0 x 0 0 x x 0 x 0 x x 9 x 0 x x 9 x 0 0 x x x 0 0 x x x 0 0 x x 0 x 90 0 x x 0 x 0 Revision: Apr Document Number: For technical questions, contact: ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT

4 ELECTRICAL DATA SYMBOL I L I L DESCRIPTION Rated capacitance at 00 Hz Rated RMS ripple current at 00 Hz, C or at 0 khz, 0 C Max. leakage current after min at U R Max. leakage current after min at U R Max. equivalent series resistance at 00 Hz Max. impedance at 0 khz ORDERING EXAMPLE Electrolytic capacitor 0 series μf/ V; ± 0 % Nominal case size: Ø 0 mm x 0 mm Ordering code: MAL 0 0 E Former NC: 0 0 0/0 PECPW Note Unless otherwise specified, all electrical values in tables and apply at T amb = 0 C, P = kpa to 0 kpa, RH = % to % Table ELECTRICAL DATA AND ORDERING INFORMATION 0 SERIES U R (V) Hz (μf) NOMINAL CASE SIE Ø D x L (mm) 00 Hz C 0 khz 0 C I L min I L min 00 Hz 0 khz ORDERING CODE MAL x E 000 x E x E 000 x E 000 x E x E x E x E x E 00 x E x E x E 000 x E 000 x E x E x E x E x E 00 x E 00 x E x E 000 x E 000 x E x E x E x E x E 00 x E 00 x E 00 0 x E x E 000 x E x E x E x E x E Revision: Apr Document Number: For technical questions, contact: ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT

5 0/0 PECPW ELECTRICAL DATA AND ORDERING INFORMATION 0 SERIES U R (V) Hz (μf) NOMINAL CASE SIE Ø D x L (mm) 00 Hz C 0 khz 0 C I L min I L min 00 Hz 0 khz ORDERING CODE MAL x E 00 x E 00 0 x E 00 x E x E x E x E x E 0 x E 000 x E 00 0 x E 00 x E 00 x E 00 0 x E 00 0 x E 00 0 x E x E Table ELECTRICAL DATA AND ORDERING INFORMATION 0 SERIES U R (V) Hz (μf) NOMINAL CASE SIE Ø D x L (mm) 00 Hz C 0 khz 0 C I L min I L min 00 Hz 0 khz ORDERING CODE MAL x E 0 x E 0 0 x E 0 x E 0 x E 0 0 x E x E 00 0 x E 00 0 x E x E 00 x E 0 0 x E 0 x E 0 x E 0 0 x E 0 0 x E 0 0 x E x E x E 00 x E 0 0 x E 0 x E 0 x E 0 0 x E 0 0 x E 0 0 x E x E Revision: Apr Document Number: For technical questions, contact: ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT

6 0/0 PECPW ADDITIONAL ELECTRICAL DATA PARAMETER CONDITIONS VALUE Voltage Surge voltage 0 V versions U s =. x U R V versions U s =. x U R Reverse voltage U rev V Current Leakage current After min at U R I L 0.00 x U R + μa After min at U R I L 0.00 x U R + μa Inductance Case Ø D = mm Max. nh Equivalent series inductance (ESL) Case Ø D = 0 mm and mm Max. 0 nh Case Ø D = 0 mm Max. nh CAPACITANCE (C). C C 0.0 Curve : U R = 00 V and 00 V Curve : U R = 0 V, V, V, 0 V, and V Curve : U R = V,. C C 0.0 Curve : U R = 00 V and 00 V Curve : U R = 0 V and V Curve : U R = V and V Curve : U R = 0 V and V 0.9, C 0 = capacitance at 0 C, 00 Hz T amb ( C) C 0 = capacitance at 0 C, 00 Hz f (Hz) 0 Fig. 9 Typical multiplier of capacitance as a function of ambient temperature Fig. 0 Typical multiplier of capacitance as a function of frequency EQUIVALENT SERIES RESISTANCE ()...0 Curve : U R = 0 V, V, and V Curve : U R = 0 V, V, and V Curve : U R = 00 V and 00 V Curve : U R = V Curve : U R = 00 V and 00 V Curve : U R = 0 V and V = typical at 0 C, 00 Hz f (Hz) = typical at 0 C, 00 Hz Case Ø D x L = x 0, x 0, 0 x 0, and x 0 mm T amb ( C) 00 Fig. Typical multiplier of typical as a function of frequency Fig. Typical multiplier of as a function of ambient temperature Revision: Apr Document Number: For technical questions, contact: ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT

7 0/0 PECPW Curve : U R = V Curve : U R = 00 V Curve : U R = 00 V Curve : U R = 0 V to V, 0 = typical at 0 C, 00 Hz 0 Case Ø D x L = x 0, 0 x 0, 0 x 0, 0 x 0, and 0 x 00 mm T amb ( C) 00 Fig. Typical multiplier of as a function of ambient temperature IMPEDANCE () Curve : U R = V Curve : U R = 00 V Curve : U R = 00 V Curve : U R = 0 V to V Curve : U R = V Curve : U R = 00 V Curve : U R = 00 V Curve : U R = 0 V to V 0 = impedance at 0 C, 0 khz, 0 = impedance at 0 C, 00 Hz 0 Case Ø D x L = x 0, x 0, 0 x 0, and x 0 mm T amb ( C) 00 0 Case Ø D x L = x 0, 0 x 0, 0 x 0, 0 x 0, and 0 x 00 mm T amb ( C) 00 Fig. Typical multiplier of impedance as a function of ambient temperature Fig. Typical multiplier of impedance as a function of ambient temperature 0 0 Curve : µf, V Curve : 0 µf, 00 V Curve : 0 µf, 00 V Curve : 00 µf, V Curve : 00 µf, 0 V Curve : 00 µf, V Curve : 00 µf, V Curve : µf, 0 V 0 0 Curve : 00 µf, V Curve : 0 µf, 00 V Curve : 000 µf, 00 V Curve : 00 µf, V Curve : 00 µf, 0 V Curve : 00 µf, V Curve : µf, V Curve : 000 µf, 0 V Case Ø D x L = x 0 mm f (Hz) 0 T amb (0 C) Fig. Typical impedance as a function of frequency 0 Case Ø D x L = x 0 mm f (Hz) 0 T amb (0 C) Fig. Typical impedance as a function of frequency Revision: Apr Document Number: For technical questions, contact: ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT

8 0/0 PECPW Curve : 0 µf, V Curve : 0 µf, 00 V Curve : 00 µf, 00 V Curve : 00 µf, V Curve : 00 µf, 0 V Curve : µf, V Curve : 000 µf, V Curve : 000 µf, 0 V Case Ø D x L = x 0 mm and x 0 mm Curve : 0 µf, V Curve : 00 µf, 00 V Curve : 00 µf, 00 V Curve : 00 µf, V Curve : µf, 0 V Curve : 000 µf, V Curve : 000 µf, V Curve : 000 µf, 0 V 0 Case Ø D x L = x 0 mm f (Hz) 0 T amb (0 C) Fig. Typical impedance as a function of frequency f (Hz) 0 T amb (0 C) Fig. 9 Typical impedance as a function of frequency Case Ø D x L = 0 x 0 mm Curve : 0 µf, V Curve : 0 µf, 00 V Curve : 00 µf, 00 V Curve : µf, V Curve : 000 µf, 0 V Curve : 000 µf, V Curve : 000 µf, V Curve : 000 µf, 0 V Case Ø D x L = 0 x 0 mm Curve : 0 µf, V Curve : 000 µf, 00 V Curve : 00 µf, 00 V Curve : 000 µf, 0 V Curve : 000 µf, V Curve : 000 µf, V Curve : 000 µf, 0 V f (Hz) 0 T amb (0 C) Fig. 0 Typical impedance as a function of frequency f (Hz) 0 T amb (0 C) Fig. Typical impedance as a function of frequency 0 0 Case Ø D x L = 0 x 00 mm Curve : 0 µf, V Curve : 00 µf, 00 V Curve : 00 µf, 00 V Curve : 000 µf, V Curve : 000 µf, 0 V Curve : 000 µf, V Curve : 000 µf, V 0 0 Case Ø D x L = 0 x 00 mm Curve : 000 µf, V Curve : 00 µf, 00 V Curve : µf, 00 V Curve : 000 µf, V Curve : 000 µf, 0 V Curve : 000 µf, V Curve : µf, V f (Hz) 0 T amb (0 C) Fig. Typical impedance as a function of frequency f (Hz) 0 T amb (0 C) Fig. Typical impedance as a function of frequency Revision: Apr Document Number: For technical questions, contact: ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT

9 0/0 PECPW RIPPLE CURRENT AND USEFUL LIFE. MGA I A.. I A = Actual ripple current at 00 Hz = Rated ripple current at 00 Hz and C () Useful life at C and applied: 000 h Table Table Fig. Multiplier of useful life as a function of ambient temperature and ripple current load MULTIPLIER OF RIPPLE CURRENT ( ) AS A FUNCTION OF FREQUENCY FREQUENCY (Hz) MULTIPLIER life multiplier T amb ( C) () TEST PROCEDURES AND REQUIREMENTS NAME OF TEST Endurance Useful life Shelf life (storage at high temperature) TEST REFERENCE IEC 0 / EN000 subclause. CECC 00 subclause.. IEC 0 / EN000 subclause. PROCEDURE (quick reference) T amb = C; U R applied; 000 h T amb = C; U R and applied; 000 h T amb = C; no voltage applied; 00 h after test: U R to be applied for 0 min, h to h before measurement REQUIREMENTS U R 00 V; C/C: ± % U R 00 V; C/C: ± 0 %. x spec. limit x spec. limit I L spec. limit U R 00 V; C/C: ± % U R 00 V; C/C: ± 0 % x spec. limit x spec. limit I L spec. limit no short or open circuit, no visible damage total failure percentage: U R 00 V: %; U R > 00 V: % C/C: ± 0 %. x spec. limit I L x spec. limit Revision: Apr 9 Document Number: For technical questions, contact: ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT

10 Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, Vishay ), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, noninfringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer s technical experts. Product specifications do not expand or otherwise modify Vishay s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, lifesaving, or lifesustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Revision: Jun Document Number: 9000

Aluminum Electrolytic Capacitors Axial Miniature, Long-Life

Aluminum Electrolytic Capacitors Axial Miniature, Long-Life Aluminum Electrolytic Capacitors Axial Miniature, Long-Life 38 AML 0 ASM smaller dimensions Fig. QUICK REFERENCE DATA DESCRIPTION Nominal case sizes (Ø D x L in mm) 6.3 x.7 to 0 x 5 VALUE 0 x 30 to x 38

More information

Silicon PIN Photodiode

Silicon PIN Photodiode Silicon PIN Photodiode DESCRIPTION 94 8632 is a PIN photodiode with high speed and high radiant sensitivity in a clear, side view plastic package. It is sensitive to visible and near infrared radiation.

More information

handbook, 2 columns handbook, halfpage 085 CS

handbook, 2 columns handbook, halfpage 085 CS FEATURES Polarized aluminium electrolytic capacitors, non-solid, self healing Extended voltage and capacitance range SMD-version, fully moulded, insulated Flexible terminals, reflow and wave solderable

More information

50 W Power Resistor, Thick Film Technology, TO-220

50 W Power Resistor, Thick Film Technology, TO-220 50 W Power Resistor, Thick Film Technology, TO-220 FEATURES 50 W at 25 C heatsink mounted Adjusted by sand trimming Leaded or surface mount versions High power to size ratio Non inductive element Material

More information

Power Resistor Thick Film Technology

Power Resistor Thick Film Technology Power Resistor Thick Film Technology LTO series are the extension of RTO types. We used the direct ceramic mounting design (no metal tab) of our RCH power resistors applied to semiconductor packages. FEATURES

More information

Silicon PIN Photodiode

Silicon PIN Photodiode Silicon PIN Photodiode DESCRIPTION 94 8583 BPW34 is a PIN photodiode with high speed and high radiant sensitivity in miniature, flat, top view, clear plastic package. It is sensitive to visible and near

More information

1/2" (12.7 mm) Conductive Plastic and Cermet Potentiometer

1/2 (12.7 mm) Conductive Plastic and Cermet Potentiometer 1/2" (12.7 mm) Conductive Plastic and Cermet Potentiometer FEATURES Robust construction High rotational life (50 000 cycles) Up to three sections PC support plates Rotary switches and solder lugs terminals

More information

SMD PTC - Nickel Thin Film Linear Thermistors

SMD PTC - Nickel Thin Film Linear Thermistors SMD PTC - Nickel Thin Film Linear Thermistors Notes (1) Contact if closer TCR lot tolerance is desired. (2) Other R 25 -values and tolerances are available upon request. (3) Rated continuous working voltage

More information

Power Resistor for Mounting onto a Heatsink Thick Film Technology

Power Resistor for Mounting onto a Heatsink Thick Film Technology DIMENSIONS in millimeters Power Resistor for Mounting onto a Heatsink Thick Film Technology FEATURES 800 W at 85 C bottom case temperature Wide resistance range: 0.3 to 900 k E24 series Non inductive Easy

More information

Optocoupler, Photodarlington Output, Dual Channel, SOIC-8 Package

Optocoupler, Photodarlington Output, Dual Channel, SOIC-8 Package Optocoupler, Photodarlington Output, i179042 DESCRIPTION A1 C 2 A3 C4 8 C 7E 6C 5E The ILD233T is a high current transfer ratio (CTR) optocoupler. It has a gallium arsenide infrared LED emitter and silicon

More information

Reflective Optical Sensor with Transistor Output

Reflective Optical Sensor with Transistor Output TCRT5000, TCRT5000L Reflective Optical Sensor with Transistor Output FEATURES Package type: leaded Detector type: phototransistor Dimensions (L x W x H in mm): 10.2 x 5.8 x 7 Peak operating distance: 2.5

More information

Standard Thick Film Chip Resistors

Standard Thick Film Chip Resistors Standard Thick Film Chip Resistors FEATURES Stability R/R = 1 % for 00 h at 70 C 2 mm pitch packaging option for size Pure tin solder contacts on Ni barrier layer provides compatibility with lead (Pb)-free

More information

Pulse Proof, High Power Thick Film Chip Resistors

Pulse Proof, High Power Thick Film Chip Resistors Pulse Proof, High Power Thick Film Chip Resistors STANDARD ELTRICAL SPIFICATIONS MODEL CASE SIZE INCH CASE SIZE METRIC POWER RATING P 70 W LIMITING ELEMENT VOLTAGE U max. AC/DC -HP e3 FTURES Excellent

More information

High Speed Infrared Emitting Diode, 870 nm, GaAlAs Double Hetero

High Speed Infrared Emitting Diode, 870 nm, GaAlAs Double Hetero TSFF55 High Speed Infrared Emitting Diode, 87 nm, GaAlAs Double Hetero 26 DESCRIPTION TSFF55 is an infrared, 87 nm emitting diode in GaAlAs double hetero (DH) technology with high radiant power and high

More information

Insulated Precision Wirewound Resistors Axial Leads

Insulated Precision Wirewound Resistors Axial Leads Insulated Precision Wirewound Resistors Axial Leads In wirewound precision resistors, the series holds a leading position in professional applications whenever an excellent stability of the ohmic value

More information

Standard Recovery Diodes, Generation 2 DO-5 (Stud Version), 95 A

Standard Recovery Diodes, Generation 2 DO-5 (Stud Version), 95 A Standard Recovery Diodes, Generation 2 DO-5 (Stud Version), 95 A 95PF(R)... DO-203AB (DO-5) PRODUCT SUMMARY I F(AV) Package Circuit configuration 95PF(R)...W DO-203AB (DO-5) 95 A DO-203AB (DO-5) Single

More information

Low Current SMD LED PLCC-2

Low Current SMD LED PLCC-2 Low Current SMD LED PLCC-2 VLMC31. 19225 DESCRIPTION These new devices have been designed to meet the increasing demand for low current SMD LEDs. The package of the VLMC31. is the PLCC-2 (equivalent to

More information

Thick Film Resistor Networks, Military, MIL-PRF-83401 Qualified, Type RZ010 and RZ020 Dual-In-Line, Molded DIP

Thick Film Resistor Networks, Military, MIL-PRF-83401 Qualified, Type RZ010 and RZ020 Dual-In-Line, Molded DIP MDM (Military M831/1 and /2) Thick Film Resistor Networks, Military, MIL-PRF-831 Qualified, Type RZ1 and RZ2 Dual-In-Line, Molded DIP STANDARD ELECTRICAL SPECIFICATIONS VISHAY DALE MODEL/ PIN NO. MIL STYLE

More information

Power MOSFET FEATURES. IRF610PbF SiHF610-E3 IRF610 SiHF610. PARAMETER SYMBOL LIMIT UNIT Drain-Source Voltage V DS 200 V Gate-Source Voltage V GS ± 20

Power MOSFET FEATURES. IRF610PbF SiHF610-E3 IRF610 SiHF610. PARAMETER SYMBOL LIMIT UNIT Drain-Source Voltage V DS 200 V Gate-Source Voltage V GS ± 20 Power MOSFET PRODUCT SUMMARY (V) 00 R DS(on) ( ) = 1.5 Q g (Max.) (nc) 8. Q gs (nc) 1.8 Q gd (nc) 4.5 Configuration Single FEATURES Dynamic dv/dt Rating Repetitive Avalanche Rated Fast Switching Ease of

More information

High Performance Schottky Rectifier, 1 A

High Performance Schottky Rectifier, 1 A High Performance Schottky Rectifier, A VS-MQNPbF Cathode Anode DO-24AC (SMA) PRODUCT SUMMARY Package DO-24AC (SMA) I F(AV) A V R V V F at I F.78 V I RM ma at 25 C T J max. 5 C Diode variation Single die

More information

Pulse Proof Thick Film Chip Resistors

Pulse Proof Thick Film Chip Resistors Pulse Proof Thick Film Chip Resistors FEATURES High pulse performance, up to kw Stability R/R 1 % for h at 70 C AEC-Q200 qualified Material categorization: for definitions of compliance please see www.vishay.com/doc?99912

More information

Schottky Rectifier, 100 A

Schottky Rectifier, 100 A Schottky Rectifier, A VS-BGQ Cathode Anode PowerTab PRODUCT SUMMARY Package PowerTab I F(AV) A V R V V F at I F 0.82 V I RM 180 ma at 125 C T J max. 175 C Diode variation Single die E AS 9 mj FEATURES

More information

Custom Products. Magnetic Components. Vishay Dale. www.vishay.com

Custom Products. Magnetic Components. Vishay Dale. www.vishay.com Magnetic Components SWITCH MODE MAGNETICS AIR CORE INDUCTORS INDUCTIVE PRODUCTS CUSTOM DESIGN AND PRODUCTION has extensive facilities for custom design and production of custom magnetics. Design applications

More information

Power MOSFET FEATURES. IRF540PbF SiHF540-E3 IRF540 SiHF540. PARAMETER SYMBOL LIMIT UNIT Drain-Source Voltage V DS 100 V Gate-Source Voltage V GS ± 20

Power MOSFET FEATURES. IRF540PbF SiHF540-E3 IRF540 SiHF540. PARAMETER SYMBOL LIMIT UNIT Drain-Source Voltage V DS 100 V Gate-Source Voltage V GS ± 20 Power MOSFET PRODUCT SUMMARY (V) 100 R DS(on) ( ) = 0.077 Q g (Max.) (nc) 72 Q gs (nc) 11 Q gd (nc) 32 Configuration Single TO220AB G DS ORDERING INFORMATION Package Lead (Pb)free SnPb G D S NChannel MOSFET

More information

Standard 0603 SMD LED

Standard 0603 SMD LED TLMS, TLMO, TLMY, TLMG, TLMP, TLMB Standard 63 SMD LED DESCRIPTION 8562 The new 63 LED series have been designed in the smallest SMD package. This innovative 63 LED technology opens the way to smaller

More information

NTC Thermistors, Radial Leaded and Coated

NTC Thermistors, Radial Leaded and Coated M, C, T NTC Thermistors, Radial Leaded and Coated FEATURES Small size - conformally coated Wide resistance range Available in 11 different R-T curves Available in point matched and curve tracking precision

More information

High Stability - High Temperature (230 C) Thin Film Wraparound Chip Resistors, Sulfur Resistant

High Stability - High Temperature (230 C) Thin Film Wraparound Chip Resistors, Sulfur Resistant High Stability - High Temperature (230 C) Thin Film Wraparound Chip Resistors, Sulfur Resistant INTRODUCTION For applications such as down hole applications, the need for parts able to withstand very severe

More information

Standard Recovery Diodes (Hockey PUK), 2100 A

Standard Recovery Diodes (Hockey PUK), 2100 A Standard Recovery Diodes (Hockey PUK), 2 A VS-SD10C..K Series DO-200AC (K-PUK) PRODUCT SUMMARY I F(AV) 2 A Package DO-200AC (K-PUK) Circuit configuration Single diode FEATURES Wide current range High voltage

More information

Thick Film Chip Resistors, Military/Established Reliability MIL-PRF-55342 Qualified, Type RM

Thick Film Chip Resistors, Military/Established Reliability MIL-PRF-55342 Qualified, Type RM Thick Film Chip Resistors, Military/Established Reliability -PRF-55342 Qualified, Type RM MATERIAL SPECIFICATIONS Resistive element Ruthenium oxide Encapsulation Epoxy Substrate 96 % alumina Termination

More information

Power MOSFET FEATURES. IRF740PbF SiHF740-E3 IRF740 SiHF740. PARAMETER SYMBOL LIMIT UNIT Drain-Source Voltage V DS 400 V Gate-Source Voltage V GS ± 20

Power MOSFET FEATURES. IRF740PbF SiHF740-E3 IRF740 SiHF740. PARAMETER SYMBOL LIMIT UNIT Drain-Source Voltage V DS 400 V Gate-Source Voltage V GS ± 20 Power MOSFET PRODUCT SUMMARY (V) 400 R DS(on) (Ω) = 0.55 Q g (Max.) (nc) 63 Q gs (nc) 9.0 Q gd (nc) 3 Configuration Single FEATURES Dynamic dv/dt Rating Repetitive Avalanche Rated Fast Switching Ease of

More information

Schottky Rectifier, 1 A

Schottky Rectifier, 1 A Schottky Rectifier, 1 A BQPbF FEATURES SMB Cathode Anode Small foot print, surface mountable Low forward voltage drop High frequency operation Available RoHS* COMPLIANT Guard ring for enhanced ruggedness

More information

Metal Film Resistors, Military, MIL-R-10509 Qualified, Precision, Type RN and MIL-PRF-22684 Qualified, Type RL

Metal Film Resistors, Military, MIL-R-10509 Qualified, Precision, Type RN and MIL-PRF-22684 Qualified, Type RL Metal Film Resistors, Military, Qualified, Precision, Type RN and Qualified, Type RL FEATURES Very low noise (- 40 db) Very low voltage coefficient (5 ppm/v) Controlled temperature coefficient Flame retardant

More information

5 V, 1 A H-Bridge Motor Driver

5 V, 1 A H-Bridge Motor Driver , A H-Bridge Motor Driver DESCRIPTION The SIP200 is an integrated, buffered H-bridge with TTL and CMOS compatible inputs with the capability of delivering up to A continuous current at DD supply. The SIP200

More information

High Power Infrared Emitting Diode, 940 nm, GaAlAs/GaAs

High Power Infrared Emitting Diode, 940 nm, GaAlAs/GaAs TSAL64 High Power Infrared Emitting Diode, 94 nm, GaAlAs/GaAs DESCRIPTION 94 8389 TSAL64 is an infrared, 94 nm emitting diode in GaAlAs/GaAs technology with high radiant power molded in a blue-gray plastic

More information

Power MOSFET FEATURES. IRF520PbF SiHF520-E3 IRF520 SiHF520. PARAMETER SYMBOL LIMIT UNIT Drain-Source Voltage V DS 100 V Gate-Source Voltage V GS ± 20

Power MOSFET FEATURES. IRF520PbF SiHF520-E3 IRF520 SiHF520. PARAMETER SYMBOL LIMIT UNIT Drain-Source Voltage V DS 100 V Gate-Source Voltage V GS ± 20 Power MOSFET PRODUCT SUMMARY (V) 100 R DS(on) ( ) = 0.7 Q g (Max.) (nc) 16 Q gs (nc) 4.4 Q gd (nc) 7.7 Configuration Single TO0AB G DS ORDERING INFORMATION Package Lead (Pb)free SnPb G D S NChannel MOSFET

More information

Interference Suppression Film Capacitors MKP Radial Potted Type

Interference Suppression Film Capacitors MKP Radial Potted Type MKP338 6 Y2 Vishay BCcomponents Interference Suppression Film Capacitors 168x12(halfpage) l P Dimensions in mm Note (1) F - F < 0.3 mm F = 7.5 mm + 0.6 mm/- 0.1 mm APPLICATIONS For standard line bypass

More information

Ultra Precision Metal Film Leaded Resistors

Ultra Precision Metal Film Leaded Resistors Ultra Precision Metal Film Leaded Resistors FEATURES Exceptional low TCR: ± 2 ppm/k to ± 10 ppm/k Super tight tolerance: ± 0.01 % to ± 0.25 % Exceptional overall stability: class 0.02 Wide resistance range:

More information

Preliminary Data Sheet

Preliminary Data Sheet Surface Mount Ceramic Chip Antennas for 433 MHz The VJ5301M433 series are small form-factor, high-performance chip-antennas optimized for industrial, automotive, and medical applications. chip antenna

More information

Metal Film Resistors, Industrial, Precision

Metal Film Resistors, Industrial, Precision CMF Industrial Metal Film Resistors, Industrial, Precision FEATURES Small size - conformal coated Flame retardant epoxy coating Controlled temperature coefficient Excellent high frequency characteristics

More information

Dual Common-Cathode Ultrafast Plastic Rectifier

Dual Common-Cathode Ultrafast Plastic Rectifier (F,B)6AT thru (F,B)6JT Dual Common-Cathode Ultrafast Plastic Rectifier TO-0AB 6xT PIN PIN 3 PIN CASE 3 TO-63AB ITO-0AB F6xT PIN PIN 3 PIN 3 FEATURES Glass passivated chip junction Ultrafast recovery time

More information

700 MHz, -3 db Bandwidth; Dual SPDT Analog Switch

700 MHz, -3 db Bandwidth; Dual SPDT Analog Switch 7 MHz, -3 db Bandwidth; Dual SPDT Analog Switch DESCRIPTION is a low R ON, high bandwidth analog switch configured in dual SPDT. It achieves 5.5 Ω switch on resistance, greater than 7 MHz -3 db bandwidth

More information

Power MOSFET. IRF9520PbF SiHF9520-E3 IRF9520 SiHF9520. PARAMETER SYMBOL LIMIT UNIT Drain-Source Voltage V DS - 100 V Gate-Source Voltage V GS ± 20

Power MOSFET. IRF9520PbF SiHF9520-E3 IRF9520 SiHF9520. PARAMETER SYMBOL LIMIT UNIT Drain-Source Voltage V DS - 100 V Gate-Source Voltage V GS ± 20 Power MOSFET PRODUCT SUMMARY (V) 100 R DS(on) ( ) = 10 V 0.60 Q g (Max.) (nc) 18 Q gs (nc) 3.0 Q gd (nc) 9.0 Configuration Single TO220AB G DS ORDERING INFORMATION Package Lead (Pb)free SnPb G S D PChannel

More information

IR Receiver Modules for Remote Control Systems

IR Receiver Modules for Remote Control Systems IR Receiver Modules for Remote Control Systems FEATURES Very low supply current Photo detector and preamplifier in one package Internal filter for PCM frequency Supply voltage: 2.5 V to 5.5 V Improved

More information

High-Bandwidth, Low Voltage, Dual SPDT Analog Switches

High-Bandwidth, Low Voltage, Dual SPDT Analog Switches DG, DG High-Bandwidth, Low Voltage, Dual SPDT Analog Switches DESCRIPTION The DG/DG are monolithic CMOS dual single-pole/double-throw (SPDT) analog switchs. They are specifically designed for low-voltage,

More information

Surface Mount Ceramic Chip Antennas for 868 MHz

Surface Mount Ceramic Chip Antennas for 868 MHz VJ561M868MXBSR Surface Mount Ceramic Chip Antennas for 868 MHz VJ561M868MXBSR chip antenna product Vishay VJ561M868MXBSR chip antennas are covered by one or more of the following patents: WO2825262 (A1),

More information

DC Film Capacitor MKT Radial Potted Type

DC Film Capacitor MKT Radial Potted Type MKT 370 l w FEATURES Available taped and loose in box RoHS compliant h ENCAPSULATION Flame retardant plastic case and epoxy resin (UL-class 94 V-0) P ± 0.3 Dimensions in mm l t Ø d t CLIMATIC TESTING CLASS

More information

Optocoupler, Phototransistor Output, with Base Connection

Optocoupler, Phototransistor Output, with Base Connection CNY7 Optocoupler, Phototransistor FEATURES Isolation test voltage 5 V RMS A 6 B Long term stability i79 C NC 5 C E Industry standard dual-in-line package Lead (Pb-free component Component in accordance

More information

Dome Lens SMD LED FEATURES APPLICATIONS. WAVELENGTH (nm)

Dome Lens SMD LED FEATURES APPLICATIONS. WAVELENGTH (nm) Dome Lens SMD LED VLD.1235R... DESCRIPTION VLD.1235G... The dome lens SMD LED series has been designed in a small untinted and clear molded package with lens for surface mounting as gullwing or reverse

More information

DG2706. High Speed, Low Voltage, 3, Quad SPDT CMOS Analog Switch. Vishay Siliconix DESCRIPTION FEATURES APPLICATIONS

DG2706. High Speed, Low Voltage, 3, Quad SPDT CMOS Analog Switch. Vishay Siliconix DESCRIPTION FEATURES APPLICATIONS High Speed, Low Voltage, 3, Quad SPDT CMOS Analog Switch DESCRIPTION The DG2706 is a high speed, low voltage, low On-resistance, quad SPDT (single pole double throw) analog switch. It operates from a.6

More information

MCS 0402 AT, MCT 0603 AT, MCU 0805 AT, MCA 1206 AT - Precision www.vishay.com. Precision Thin Film Chip Resistors

MCS 0402 AT, MCT 0603 AT, MCU 0805 AT, MCA 1206 AT - Precision www.vishay.com. Precision Thin Film Chip Resistors Precision Thin Film Chip Resistors FEATURES Rated dissipation P 70 up to 0.4 W for size 1206 AEC-Q200 qualified Approved to EN 140401-801 Superior temperature cycling robustness Sulfur resistance verified

More information

DG2515, DG2516. 3-Ω, 235-MHz Bandwidth, Dual SPDT Analog Switch. Vishay Siliconix. Not for New Design. RoHS COMPLIANT DESCRIPTION FEATURES BENEFITS

DG2515, DG2516. 3-Ω, 235-MHz Bandwidth, Dual SPDT Analog Switch. Vishay Siliconix. Not for New Design. RoHS COMPLIANT DESCRIPTION FEATURES BENEFITS Not for New Design DG, DG -Ω, -MHz Bandwidth, Dual SPDT Analog Switch DESCRIPTION The DG, DG are low-voltage dual single-pole/ double-throw monolithic CMOS analog switches. Designed to operate from.8 V

More information

Metal Film Resistors, Military, MIL-R-10509 Qualified, Type RN and MIL-PRF-22684 Qualified, Type RL

Metal Film Resistors, Military, MIL-R-10509 Qualified, Type RN and MIL-PRF-22684 Qualified, Type RL CMF (Military RN and RL) Metal Film Resistors, Military, Qualified, Type RN and Qualified, Type RL FEATURES Very low noise (- 40 db) Very low voltage coefficient (5 ppm/v) Controlled temperature coefficient

More information

DG2302. High-Speed, Low r ON, SPST Analog Switch. Vishay Siliconix. (1-Bit Bus Switch with Level-Shifter) RoHS* COMPLIANT DESCRIPTION FEATURES

DG2302. High-Speed, Low r ON, SPST Analog Switch. Vishay Siliconix. (1-Bit Bus Switch with Level-Shifter) RoHS* COMPLIANT DESCRIPTION FEATURES High-Speed, Low r ON, SPST Analog Switch (1-Bit Bus Switch with Level-Shifter) DG2302 DESCRIPTION The DG2302 is a high-speed, 1-bit, low power, TTLcompatible bus switch. Using sub-micron CMOS technology,

More information

45 V, 100 ma NPN/PNP general-purpose transistor

45 V, 100 ma NPN/PNP general-purpose transistor Rev. 4 18 February 29 Product data sheet 1. Product profile 1.1 General description NPN/PNP general-purpose transistor pair in a very small SOT363 (SC-88) Surface-Mounted Device (SMD) plastic package.

More information

DDSL01. Secondary protection for DSL lines. Features. Description

DDSL01. Secondary protection for DSL lines. Features. Description Secondary protection for DSL lines Features Stand off voltage: 30 V Surge capability: I pp = 30 A 8/20 µs Low capacitance device: 4.5 pf at 2 V RoHS package Low leakage current: 0.5 µa at 25 C 3 2 Description

More information

FEATURES BODY DIA. MAX. Type M AWG 30: 0.0100 [0.254] Type C AWG 28: 0.0126 [0.320] Type T AWG 30: 0.0100 [0.254]

FEATURES BODY DIA. MAX. Type M AWG 30: 0.0100 [0.254] Type C AWG 28: 0.0126 [0.320] Type T AWG 30: 0.0100 [0.254] M, C, T NTC Thermistors, Coated FEATURES Small size - conformally coated. Wide resistance range. Available in 11 different R-T curves. DESCRIPTION Models M, C, and T are conformally coated, leaded thermistors

More information

Application Note TMA Series

Application Note TMA Series 1W, SIP, Single & Dual Output DC/DC Converters Features SIP Package with Industry Standard Pinout Package Dimension: 19.5 x 10.2 x 6.1 mm (0.77 x 0.4 x 0.24 ) 5V&12V Models 19.5 x 10.2 x 7.1 mm (0.77 x

More information

Power MOSFET FEATURES. IRFSL11N50APbF SiHFSL11N50A-E3. PARAMETER SYMBOL LIMIT UNIT Drain-Source Voltage V DS 500 V Gate-Source Voltage V GS ± 30

Power MOSFET FEATURES. IRFSL11N50APbF SiHFSL11N50A-E3. PARAMETER SYMBOL LIMIT UNIT Drain-Source Voltage V DS 500 V Gate-Source Voltage V GS ± 30 Power MOFET IRFL11N50, ihfl11n50 PRODUCT UMMRY V D (V) 500 R D(on) ( ) V G = 10 V 0.55 Q g (Max.) (nc) 51 Q gs (nc) 12 Q gd (nc) 23 Configuration ingle I 2 PK (TO262) G D FETURE Dynamic dv/dt Rating Repetitive

More information

Thin Film MELF Resistors

Thin Film MELF Resistors Thin Film MELF Resistors FEATURES MELF resistor with high power rating AEC-Q200 qualified Advanced metal film technology Best in class pulse load capability Intrinsic sulfur resistance Material categorization:

More information

N-Channel 20-V (D-S) 175 C MOSFET

N-Channel 20-V (D-S) 175 C MOSFET N-Channel -V (D-S) 75 C MOSFET SUD7N-4P PRODUCT SUMMARY V DS (V) r DS(on) ( ) (A) a.37 @ V GS = V 37.6 @ V GS = 4.5 V 9 TO-5 D FEATURES TrenchFET Power MOSFET 75 C Junction Temperature PWM Optimized for

More information

High-Speed, Low r ON, SPST Analog Switch (1-Bit Bus Switch)

High-Speed, Low r ON, SPST Analog Switch (1-Bit Bus Switch) High-Speed, Low r ON, SPST Analog Switch (1-Bit Bus Switch) DG2301 ishay Siliconix DESCRIPTION The DG2301 is a high-speed, 1-bit, low power, TTLcompatible bus switch. Using sub-micron CMOS technology,

More information

DG2731/2732/2733. Low Voltage, 0.4 Ω, Dual SPDT Analog Switch. Vishay Siliconix. RoHS COMPLIANT FEATURES

DG2731/2732/2733. Low Voltage, 0.4 Ω, Dual SPDT Analog Switch. Vishay Siliconix. RoHS COMPLIANT FEATURES Low Voltage, 0.4 Ω, Dual SPDT Analog Switch DG273/2732/2733 DESCRIPTION The DG273/2732/2733 are low voltage, low on-resistance, dual single-pole/double-throw (SPDT) monolithic CMOS analog switches designed

More information

Axial and Radial Leaded Multilayer Ceramic Capacitors for Automotive Applications Class 1 and Class 2, 50 V DC, 100 V DC and 200 V DC

Axial and Radial Leaded Multilayer Ceramic Capacitors for Automotive Applications Class 1 and Class 2, 50 V DC, 100 V DC and 200 V DC Axial and Radial Leaded Multilayer Ceramic Capacitors for Automotive Applications Class 1 and Class 2, 5 V DC, 1 V DC and 2 V DC DESIGNING For more than 2 years Vitramon has supported the automotive industry

More information

FEATURES 200 % 175 % 150 % 125 % 100 % 75 % 50 % 25 %

FEATURES 200 % 175 % 150 % 125 % 100 % 75 % 50 % 25 % Ultra High Precision Z-Foil Resistor with TCR of ± 0.05 ppm/ C, PCR of 5 ppm at Rated Power, Tolerance of ± 0.005 % and Load Life Stability of ± 0.005 % INDUSTRY BREAKTHROUGH Any value at any tolerance

More information

Reflective Optical Sensor with Transistor Output

Reflective Optical Sensor with Transistor Output Reflective Optical Sensor with Transistor Output CNY7 Description The CNY7 is a reflective sensor that includes an infrared emitter and phototransistor in a leaded package which blocks visible light. E

More information

BZW50. Transil, transient voltage surge suppressor (TVS) Features. Description

BZW50. Transil, transient voltage surge suppressor (TVS) Features. Description Transil, transient voltage surge suppressor (TVS) Datasheet production data Features Peak pulse power: 5000 W (10/0 µs) Stand-off voltage range from 10 V to 180 V Unidirectional and bidirectional types

More information

ESDLIN1524BJ. Transil, transient voltage surge suppressor diode for ESD protection. Features. Description SOD323

ESDLIN1524BJ. Transil, transient voltage surge suppressor diode for ESD protection. Features. Description SOD323 Transil, transient voltage surge suppressor diode for ESD protection Datasheet production data Features Max peak pulse power 160 W (8/0 µs) Asymmetrical bidirectional device Stand-off voltage: 15 and 4

More information

AC/DC Power Modules C B. TML Series, 20 & 40 Watt. Features. 20 Watt Models

AC/DC Power Modules C B. TML Series, 20 & 40 Watt. Features. 20 Watt Models TML Series, 0 & 0 Watt Features C B Scheme LVD UL 090- Encapsulated power supplies with increased power density Replaces TML and TML 0 series PCB mount or chassis mount with screw terminals Single, dual

More information

TOSHIBA Bipolar Linear Integrated Circuit Silicon Monolithic TAR5SB15~TAR5SB50

TOSHIBA Bipolar Linear Integrated Circuit Silicon Monolithic TAR5SB15~TAR5SB50 TOSHIBA Bipolar Linear Integrated Circuit Silicon Monolithic TARSB~TARSB Point Regulators (Low-Dropout Regulator) TARSB~TARSB The TARSBxx Series is comprised of general-purpose bipolar single-power-supply

More information

TSM2N7002K 60V N-Channel MOSFET

TSM2N7002K 60V N-Channel MOSFET SOT-23 SOT-323 Pin Definition: 1. Gate 2. Source 3. Drain PRODUCT SUMMARY V DS (V) R DS(on) (Ω) I D (ma) 5 @ V GS = 10V 100 60 5.5 @ V GS = 5V 100 Features Low On-Resistance ESD Protection High Speed Switching

More information

Advanced Monolithic Systems

Advanced Monolithic Systems Advanced Monolithic Systems FEATURES Three Terminal Adjustable or Fixed oltages* 1.5, 1.8, 2.5, 2.85, 3.3 and 5. Output Current of 1A Operates Down to 1 Dropout Line Regulation:.2% Max. Load Regulation:.4%

More information

Surface Mount Schottky Barrier

Surface Mount Schottky Barrier FEATURES - Very low profile - typical height of 0.68mm - Low power loss, high efficiency - Ideal for automated placement - Moisture sensitivity level: level, per J-STD-020 - Compliant to RoHS Directive

More information

EE-SPY801/802. Photomicrosensors for detecting wafer-carrier mounting. Wafer-carrier Mounting Photomicrosensors. Ordering Information.

EE-SPY801/802. Photomicrosensors for detecting wafer-carrier mounting. Wafer-carrier Mounting Photomicrosensors. Ordering Information. Wafer-carrier Mounting Photomicrosensors EE-SPY1/ CSM_EE-SPY1 DS_E_3_ Photomicrosensors for detecting wafer-carrier mounting. The mounting position is set with a pedestal. The contact surface with the

More information

High-speed switching diodes. Type number Package Configuration Package NXP JEITA JEDEC

High-speed switching diodes. Type number Package Configuration Package NXP JEITA JEDEC Rev. 8 18 November 2010 Product data sheet 1. Product profile 1.1 General description, encapsulated in small Surface-Mounted Device (SMD) plastic packages. Table 1. Product overview Type number Package

More information

MBA/SMA 0204, MBB/SMA 0207, MBE/SMA 0414 - Professional www.vishay.com. Professional Metal Film Leaded Resistors

MBA/SMA 0204, MBB/SMA 0207, MBE/SMA 0414 - Professional www.vishay.com. Professional Metal Film Leaded Resistors ,, - Professional Professional Metal Film Leaded Resistors DESCRIPTION,, and professional leaded thin film resistors are the general purpose resistor for all fields of professional electronics where reliability

More information

3-input EXCLUSIVE-OR gate. The 74LVC1G386 provides a 3-input EXCLUSIVE-OR function.

3-input EXCLUSIVE-OR gate. The 74LVC1G386 provides a 3-input EXCLUSIVE-OR function. Rev. 02 3 September 2007 Product data sheet 1. General description The provides a 3-input EXCLUSIVE-OR function. The input can be driven from either 3.3 or 5 V devices. This feature allows the use of these

More information

N-Channel 40-V (D-S) 175 C MOSFET

N-Channel 40-V (D-S) 175 C MOSFET N-Channel 4-V (D-S) 75 C MOSFET SUP/SUB85N4-4 PRODUCT SUMMARY V (BR)DSS (V) r DS(on) ( ) (A) 4.4 @ V GS = V 85 a TO-22AB D TO-263 G DRAIN connected to TAB G D S Top View Ordering Information SUP85N4-4

More information

12.5 mm Modular Panel Potentiometers High Dielectric Strength

12.5 mm Modular Panel Potentiometers High Dielectric Strength , D 2.5 mm Modular anel otentiometers FEATURES High dielectric strength potentiometer up to 5000 V rms 2.5 mm square single turn panel control lastic shaft and bushing Two shaft lengths and 29 terminal

More information

TPN4R712MD TPN4R712MD. 1. Applications. 2. Features. 3. Packaging and Internal Circuit. 2014-12 2015-04-21 Rev.4.0. Silicon P-Channel MOS (U-MOS )

TPN4R712MD TPN4R712MD. 1. Applications. 2. Features. 3. Packaging and Internal Circuit. 2014-12 2015-04-21 Rev.4.0. Silicon P-Channel MOS (U-MOS ) MOSFETs Silicon P-Channel MOS (U-MOS) TPN4R712MD TPN4R712MD 1. Applications Lithium-Ion Secondary Batteries Power Management Switches 2. Features (1) Low drain-source on-resistance: R DS(ON) = 3.8 mω (typ.)

More information

NE555 SA555 - SE555. General-purpose single bipolar timers. Features. Description

NE555 SA555 - SE555. General-purpose single bipolar timers. Features. Description NE555 SA555 - SE555 General-purpose single bipolar timers Features Low turn-off time Maximum operating frequency greater than 500 khz Timing from microseconds to hours Operates in both astable and monostable

More information

NE555 SA555 - SE555. General-purpose single bipolar timers. Features. Description

NE555 SA555 - SE555. General-purpose single bipolar timers. Features. Description NE555 SA555 - SE555 General-purpose single bipolar timers Features Low turn-off time Maximum operating frequency greater than 500 khz Timing from microseconds to hours Operates in both astable and monostable

More information

P6KE. Transil, transient voltage surge suppressor (TVS) Features. Description. Complies with the following standards

P6KE. Transil, transient voltage surge suppressor (TVS) Features. Description. Complies with the following standards Transil, transient voltage surge suppressor (TVS) Datasheet production data Features Peak pulse power: 600 W (10/0 µs ) Stand-off voltage range 6.8 to 440 V Unidirectional and bidirectional types Low clamping

More information

Silicon temperature sensors. Other special selections are available on request.

Silicon temperature sensors. Other special selections are available on request. Rev. 05 25 April 2008 Product data sheet 1. Product profile 1.1 General description The temperature sensors in the have a positive temperature coefficient of resistance and are suitable for use in measurement

More information

Signal Conditioning Amplifier System

Signal Conditioning Amplifier System Micro-Measurements A2 FEATURES Strain gage, transducer, and thermocouple inputs Frequency response to 110 khz Analog output of ±10 VDC Operation with 12 to 15 VDC and 120/240 VAC power Scalable from 8

More information

LDS8720. 184 WLED Matrix Driver with Boost Converter FEATURES APPLICATION DESCRIPTION TYPICAL APPLICATION CIRCUIT

LDS8720. 184 WLED Matrix Driver with Boost Converter FEATURES APPLICATION DESCRIPTION TYPICAL APPLICATION CIRCUIT 184 WLED Matrix Driver with Boost Converter FEATURES High efficiency boost converter with the input voltage range from 2.7 to 5.5 V No external Schottky Required (Internal synchronous rectifier) 250 mv

More information

Description. Table 1. Device summary. Order codes. TO-220 (single gauge) TO-220 (double gauge) D²PAK (tape and reel) TO-220FP

Description. Table 1. Device summary. Order codes. TO-220 (single gauge) TO-220 (double gauge) D²PAK (tape and reel) TO-220FP 1.2 V to 37 V adjustable voltage regulators Description Datasheet - production data TO-220 TO-220FP The LM217, LM317 are monolithic integrated circuits in TO-220, TO-220FP and D²PAK packages intended for

More information

STIEC45-xxAS, STIEC45-xxACS

STIEC45-xxAS, STIEC45-xxACS Transil TVS for IEC 61000-4-5 compliance Datasheet - production data differential mode MIL STD 883G, method 3015-7 Class 3B 25 kv HBM (human body model) Resin meets UL 94, V0 MIL-STD-750, method 2026 solderability

More information

TEP 200WIR Series, 180 240 Watt

TEP 200WIR Series, 180 240 Watt TEP 200WIR Series, 180 240 Watt Features Chassis mount with screw terminal block Including EMI filter to meet EN 55022, class A Ultra wide 4:1 input voltage ranges 8.5 36, 16.5 75, 43 160 VDC EN 50155

More information

N-Channel 60-V (D-S) MOSFET

N-Channel 60-V (D-S) MOSFET 7/7, VQJ/P, BS7 -Channel 6-V (D-S) MOSFET Part umber V (BR)DSS Min (V) r DS(on) Max ( ) V GS(th) (V) I D (A) 7 5 @ V GS = V.8 to. 7 7.5 @ V GS = V to.5.5 VQJ 6 5.5 @ V GS = V.8 to.5.5 VQP 5.5 @ V GS =

More information

Evaluation Board for the AAT1275 Boost Converter with USB Power Switch

Evaluation Board for the AAT1275 Boost Converter with USB Power Switch Introduction EVALUATION BOARD DATA SHEET The AAT1275 evaluation board provides a platform for test and evaluation of the AAT1275 switching boost converter with USB Power Switch. The evaluation board demonstrates

More information

LM217M, LM317M. Medium current 1.2 to 37 V adjustable voltage regulator. Description. Features

LM217M, LM317M. Medium current 1.2 to 37 V adjustable voltage regulator. Description. Features Medium current 1.2 to 37 V adjustable voltage regulator Datasheet - production data Description The LM217M and LM317M are monolithic integrated circuits in DPAK package used as positive adjustable voltage

More information

SKY16406-381LF: 2.2-2.8 GHz Two-Way, 0 Degrees Power Divider

SKY16406-381LF: 2.2-2.8 GHz Two-Way, 0 Degrees Power Divider DATA SHEET SKY16406-381LF: 2.2-2.8 GHz Two-Way, 0 Degrees Power Divider Applications TD-LTE systems Satellite communications 2.4 GHz ISM band Features Low insertion loss: 0.3 db @ 2.5 GHz High isolation:

More information

12.5 mm Modular Panel Potentiometer Cermet (P11S) or Conductive Plastic Elements (P11A)

12.5 mm Modular Panel Potentiometer Cermet (P11S) or Conductive Plastic Elements (P11A) PS, PA 2.5 mm Modular Panel Potentiometer Cermet (PS) or Conductive Plastic Elements (PA) FEATURES 2.5 mm square single turn panel control Five shaft diameters and 29 terminal styles Multiple assemblies

More information

L78. Positive voltage regulator ICs. Description. Features

L78. Positive voltage regulator ICs. Description. Features Positive voltage regulator ICs Description Datasheet - production data TO-220 Features DPAK TO-220FP D²PAK Output current up to 1.5 A Output voltages of 5; 6; 8; 8.5; 9; 12; 15; 18; 24 V Thermal overload

More information

L78MxxAB L78MxxAC. Precision 500 ma regulators. Features. Description

L78MxxAB L78MxxAC. Precision 500 ma regulators. Features. Description L78MxxAB L78MxxAC Precision 500 ma regulators Features Output current to 0.5 A Output voltages of 5; 6; 8; 9; 10; 12; 15; 18; 24 V Thermal overload protection Short circuit protection Output transition

More information

SSM3K335R SSM3K335R. 1. Applications. 2. Features. 3. Packaging and Pin Configuration. 2012-07-19 Rev.3.0. Silicon N-Channel MOS (U-MOS -H)

SSM3K335R SSM3K335R. 1. Applications. 2. Features. 3. Packaging and Pin Configuration. 2012-07-19 Rev.3.0. Silicon N-Channel MOS (U-MOS -H) MOSFETs Silicon N-Channel MOS (U-MOS-H) SSM3K335R SSM3K335R 1. Applications Power Management Switches DC-DC Converters 2. Features (1) 4.5-V gate drive voltage. (2) Low drain-source on-resistance : R DS(ON)

More information

TN0023 Technical note

TN0023 Technical note Technical note Discontinuous flyback transformer description and design parameters Introduction The following is a general description and basic design procedure for a discontinuous flyback transformer.

More information

CMR Series Isolated 0.75W Single and Dual Output Isolated DC/DC Converters

CMR Series Isolated 0.75W Single and Dual Output Isolated DC/DC Converters www.murata-ps.com CMR Series SELECTION GUIDE FEATURES Single or Dual Isolated Outputs 1kVDC or 3kVDC options Wide temperature performance at full 0.75W load -40 C to 85C Industry Standard Pinouts 5V, 12V

More information

Optocoupler, Phototransistor Output, With Base Connection

Optocoupler, Phototransistor Output, With Base Connection IL/ IL2/ IL5 Optocoupler, Phototransistor Output, With Base Connection Features Current Transfer Ratio (see order information) Isolation Test Voltage 5300 V RMS Lead-free component Component in accordance

More information

PS25202 EPIC Ultra High Impedance ECG Sensor Advance Information

PS25202 EPIC Ultra High Impedance ECG Sensor Advance Information EPIC Ultra High Impedance ECG Sensor Advance Information Data Sheet 291498 issue 2 FEATURES Ultra high input resistance, typically 20GΩ. Dry-contact capacitive coupling. Input capacitance as low as 15pF.

More information