1.5KE6.8A thru 1.5KE540A, 1N6267A thru 1N6303A. TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor.

Save this PDF as:
 WORD  PNG  TXT  JPG

Size: px
Start display at page:

Download "1.5KE6.8A thru 1.5KE540A, 1N6267A thru 1N6303A. TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor. www.vishay."

Transcription

1 TRANSZORB Transient Voltage Suppressors Case Style.5KE FEATURES Glass passivated chip junction Available in uni-directional and bi-directional 500 W peak pulse power capability with a /0 μs waveform, repetitive rate (duty cycle): 0.0 % Excellent clamping capability Very fast response time Low incremental surge resistance AEC-Q qualified Solder dip 275 C max. s, per JESD 22-B6 Material categorization: For definitions of compliance please see PRIMARY CHARACTERISTICS V BR uni-directional 6.8 V to 540 V V BR bi-directional 6.8 V to 440 V V WM uni-directional 5.8 V to 459 V V WM bi-directional 5.8 V to 376 V P PPM 500 W P D 6.5 W I FSM (uni-directional only) 0 A T J max. 75 C Polarity Uni-directional, bi-directional Package.5KE DEVICES FOR BI-DIRECTION APPLICATIONS For bi-directional types, use CA suffix (e.g..5ke440ca) Eletrical characteristics apply in both directions. TYPICAL APPLICATIONS Use in sensitive electronics protection against voltage transients induced by inductive load switching and lighting on ICs, MOSFET, signal lines of sensor units for consumer, computer, industrial, automotive, and telecommunication. MECHANICAL DATA Case: Molded epoxy body over passivated junction Molding compound meets UL 94 V-0 flammability rating Base P/N-E3 - RoHS compliant, commercial grade Base P/NHE3 - RoHS compliant, AEC-Q qualified Terminals: Matte tin plated leads, solderable per J-STD-002 and JESD 22-B2 E3 suffix meets JESD class A whisker test, HE3 suffix meets JESD class 2 whisker test Note.5KE250A to.5ke540a and.5ke250ca to.5ke440ca for commercial grade only Polarity: For uni-directional types the color band denotes cathode end, no marking on bi-directional types RATINGS (T A = 25 C unless otherwise noted) PARAMETER SYMBOL VALUE UNIT Peak pulse power dissipation with a /0 μs waveform () (fig. ) P PPM 500 W Peak pulse current with a /0 μs waveform () I PPM See next table A Power dissipation on infinite heatsink at T L = 75 C (fig. 5) P D 6.5 W Peak forward surge current 8.3 ms single half sine-wave uni-directional only (2) I FSM 0 A Maximum instantaneous forward voltage at A for uni-directional only (3) V F 3.5/5.0 V Operating junction and storage temperature range T J, T STG - 55 to 75 C Notes () Non-repetitive current pulse, per fig. 3 and derated above T A = 25 C per fig. 2 (2) Measured on 8.3 ms single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minute maximum (3) V F = 3.5 V for.5ke2a and below; V F = 5.0 V for.5ke250a and above Revision: 22-Jan-4 Document Number: 8830 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT

2 ELECTRICAL CHARACTERISTICS (T A = 25 C unless otherwise noted) JEDEC TYPE NUMBER GENERAL SEMICONDUCTOR PART NUMBER BREAKDOWN VOLTAGE V BR AT I T () (V) MIN. MAX. TEST CURRENT I T (ma) STAND-OFF VOLTAGE V WM (V) REVERSE LEAKAGE AT V WM I D (4) (μa) PEAK PULSE CURRENT I PPM (2) (A) CLAMPING VOLTAGE AT I PPM V C (V) TEMPERATURE COEFFICENT OF V BR (%/ C) N6267A (+).5KE6.8A N6268A (+).5KE7.5A N6269A (+).5KE8.2A N6270A (+).5KE9.A N627A (+).5KEA N6272A (+).5KEA N6273A (+).5KE2A N6274A (+).5KE3A N6275A (+).5KE5A N6276A (+).5KE6A N6277A (+).5KE8A N6278A (+).5KEA N6279A (+).5KE22A N6280A (+).5KE24A N628A (+).5KE27A N6282A (+).5KE30A N6283A (+).5KE33A N6284A (+).5KE36A N6285A (+).5KE39A N6286A (+).5KE43A N6287A (+).5KE47A N6288A (+).5KE5A N6289A (+).5KE56A N6290A (+).5KE62A N629A (+).5KE68A N6292A (+).5KE75A N6293A (+).5KE82A N6294A (+).5KE9A N6295A (+).5KEA N6296A (+).5KE A N6297A (+).5KEA N6298A (+).5KE30A N6299A (+).5KE50A N6300A (+).5KE60A N630A (+).5KE70A N6302A.5KE80A N6303A.5KE0A* KE2A* KE250A KE300A KE350A KE400A KE440A KE480A KE5A KE540A Notes () Pulse test: t p 50 ms (2) Surge current waveform per fig. 3 and derate per fig. 2 (3) All terms and symbols are consistent with ANSI/IEEE CA62.35 (4) For bi-directional types with V R V and less the I D limit is doubled * Bi-directional versions are UL approved under component across the line protection, ULV44 file number E8274 (.5KE0CA,.5KE2CA) (+) Underwriters laboratory recognition for the classification of protectors (QVGQ2) under the UL standard for safety 497B and file number E36766 for both uni-directional and bi-directional devices Revision: 22-Jan-4 2 Document Number: 8830 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT

3 C J - Capacitance (pf) THERMAL CHARACTERISTICS (T A = 25 C unless otherwise noted) PARAMETER SYMBOL VALUE UNIT Typical thermal resistance, junction to ambient R JA 75 Typical thermal resistance, junction to lead R JL 5.4 C/ W ORDERING INFORMATION (Example) PREFERRED PIN UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE.5KE6.8A-E3/ " diameter paper tape and reel.5ke6.8ahe3/54 () " diameter paper tape and reel Note () AEC-Q qualified RATINGS AND CHARACTERISTICS CURVES (T A = 25 C unless otherwise noted) P PPM - Peak Pulse Power (kw) µs.0 µs µs µs.0 ms ms t d - Pulse Width (s) Fig. - Peak Pulse Power Rating Curve I PPM - Peak Pulse Current, % I RSM t r = µs Peak Value I PPM Half Value - I PPM t d t - Time (ms) T J = 25 C Pulse Width (t d ) is defined as the Point where the Peak Current decays to 50 % of I PPM I PP 2 /0 µs Waveform as defined by R.E.A. Fig. 3 - Pulse Waveform Peak Pulse Power (P PP ) or Current (I PP ) Derating in Percentage, % T J - Initial Temperature ( C) Fig. 2 - Pulse Power or Current vs. Initial Junction Temperature V R = Rated Stand-Off Voltage T J = 25 C f =.0 MHz V sig = 50 mvp-p Uni-Directional Bi-Directional V R = V BR - Breakdown Voltage (V) Fig. 4 - Typical Junction Capacitance Revision: 22-Jan-4 3 Document Number: 8830 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT

4 P D - Power Dissipation (W) L = 0.375" (9.5 mm) Lead Lengths.0 /0 µs Impulse ΔV C = V C - V BR.5KE0.5KE30.5KE75.5KE39.5KE33.5KE6.8.5KE T L - Lead Temperature ( C) Fig. 5 - Power Derating Curve Fig. 8 - Incremental Clamping Voltage Curve (Uni-directional) Peak Forward Surge Current (A) 0 T J = T J max. 8.3 ms Single Half Sine-Wave Number of Cycles at 60 Hz.0 /0 µs Impulse ΔV C = V C - V BR.5KE0C.5KE75C.5KE39C.5KE30C.5KE5C C.5KE7.5C Fig. 6 - Maximum Non-Repetitive Forward Surge Current Uni-Directional only Fig. 9 - Incremental Clamping Voltage Curve (Bi-directional).0 8/ µs Impulse.5KE0 ΔV C = V C - V BR.5KE30.5KE.5KE75.5KE39.5KE33.5KE6.8.5KE9..5KE8.5KE / µs Impulse ΔV.5KE0C C = V C - V BR.5KE75C.5KE39C.5KE30C.5KE5C.5KEC.5KE7.5C Fig. 7 - Incremental Clamping Voltage Curve (Uni-Directional) Fig. - Incremental Clamping Voltage Curve (Bi-Directional) Revision: 22-Jan-4 4 Document Number: 8830 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT

5 Transient Thermal Impedance ( C/W) Instantaneous Forward Current (A) T J = 25 C Pulse Width = 300 µs % Duty Cycle Instantaneous Forward Voltage (V) t p - Pulse Duration (s) Fig. - Instantaneous Forward Voltage Characteristics Curve Fig. 2 - Typical Transient Thermal Impedance PACKAGE OUTLINE DIMENSIONS in inches (millimeters) Case Style.5KE (5.3) 90 (4.8) DIA..0 (25.4) MIN (9.5) 85 (7.2) (.07) (0.96) DIA..0 (25.4) MIN. APPLICATION NOTES This series of Silicon Transient Suppressors is used in applications where large voltage transients can permanently damage voltage-sensitive components. The TVS diode can be used in applications where induced lightning on rural or remote transmission lines presents a hazard to electronic circuitry (ref: R.E.A. specification P.E. 60). This Transient Voltage Suppressor diode has a pulse power rating of 500 W for ms. The response time of TVS diode clamping action is effectively instantaneous ( x -9 s bi-directional); therefore, they can protect integrated circuits, MOS devices, hybrids, and other voltage sensitive semiconductors and components. TVS diodes can also be used in series or parallel to increase the peak power ratings. Revision: 22-Jan-4 5 Document Number: 8830 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT

6 Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, Vishay ), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer s technical experts. Product specifications do not expand or otherwise modify Vishay s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Revision: 3-Jun-6 Document Number: 90

Dual Common-Cathode Ultrafast Plastic Rectifier

Dual Common-Cathode Ultrafast Plastic Rectifier (F,B)6AT thru (F,B)6JT Dual Common-Cathode Ultrafast Plastic Rectifier TO-0AB 6xT PIN PIN 3 PIN CASE 3 TO-63AB ITO-0AB F6xT PIN PIN 3 PIN 3 FEATURES Glass passivated chip junction Ultrafast recovery time

More information

High Performance Schottky Rectifier, 1 A

High Performance Schottky Rectifier, 1 A High Performance Schottky Rectifier, A VS-MQNPbF Cathode Anode DO-24AC (SMA) PRODUCT SUMMARY Package DO-24AC (SMA) I F(AV) A V R V V F at I F.78 V I RM ma at 25 C T J max. 5 C Diode variation Single die

More information

Surface Mount Schottky Barrier

Surface Mount Schottky Barrier FEATURES - Very low profile - typical height of 0.68mm - Low power loss, high efficiency - Ideal for automated placement - Moisture sensitivity level: level, per J-STD-020 - Compliant to RoHS Directive

More information

Schottky Rectifier, 100 A

Schottky Rectifier, 100 A Schottky Rectifier, A VS-BGQ Cathode Anode PowerTab PRODUCT SUMMARY Package PowerTab I F(AV) A V R V V F at I F 0.82 V I RM 180 ma at 125 C T J max. 175 C Diode variation Single die E AS 9 mj FEATURES

More information

Standard Recovery Diodes, Generation 2 DO-5 (Stud Version), 95 A

Standard Recovery Diodes, Generation 2 DO-5 (Stud Version), 95 A Standard Recovery Diodes, Generation 2 DO-5 (Stud Version), 95 A 95PF(R)... DO-203AB (DO-5) PRODUCT SUMMARY I F(AV) Package Circuit configuration 95PF(R)...W DO-203AB (DO-5) 95 A DO-203AB (DO-5) Single

More information

High Speed Infrared Emitting Diode, 870 nm, GaAlAs Double Hetero

High Speed Infrared Emitting Diode, 870 nm, GaAlAs Double Hetero TSFF55 High Speed Infrared Emitting Diode, 87 nm, GaAlAs Double Hetero 26 DESCRIPTION TSFF55 is an infrared, 87 nm emitting diode in GaAlAs double hetero (DH) technology with high radiant power and high

More information

Standard Recovery Diodes (Hockey PUK), 2100 A

Standard Recovery Diodes (Hockey PUK), 2100 A Standard Recovery Diodes (Hockey PUK), 2 A VS-SD10C..K Series DO-200AC (K-PUK) PRODUCT SUMMARY I F(AV) 2 A Package DO-200AC (K-PUK) Circuit configuration Single diode FEATURES Wide current range High voltage

More information

Power MOSFET FEATURES. IRF540PbF SiHF540-E3 IRF540 SiHF540. PARAMETER SYMBOL LIMIT UNIT Drain-Source Voltage V DS 100 V Gate-Source Voltage V GS ± 20

Power MOSFET FEATURES. IRF540PbF SiHF540-E3 IRF540 SiHF540. PARAMETER SYMBOL LIMIT UNIT Drain-Source Voltage V DS 100 V Gate-Source Voltage V GS ± 20 Power MOSFET PRODUCT SUMMARY (V) 100 R DS(on) ( ) = 0.077 Q g (Max.) (nc) 72 Q gs (nc) 11 Q gd (nc) 32 Configuration Single TO220AB G DS ORDERING INFORMATION Package Lead (Pb)free SnPb G D S NChannel MOSFET

More information

High Power Infrared Emitting Diode, 940 nm, GaAlAs/GaAs

High Power Infrared Emitting Diode, 940 nm, GaAlAs/GaAs TSAL64 High Power Infrared Emitting Diode, 94 nm, GaAlAs/GaAs DESCRIPTION 94 8389 TSAL64 is an infrared, 94 nm emitting diode in GaAlAs/GaAs technology with high radiant power molded in a blue-gray plastic

More information

Power MOSFET FEATURES. IRF520PbF SiHF520-E3 IRF520 SiHF520. PARAMETER SYMBOL LIMIT UNIT Drain-Source Voltage V DS 100 V Gate-Source Voltage V GS ± 20

Power MOSFET FEATURES. IRF520PbF SiHF520-E3 IRF520 SiHF520. PARAMETER SYMBOL LIMIT UNIT Drain-Source Voltage V DS 100 V Gate-Source Voltage V GS ± 20 Power MOSFET PRODUCT SUMMARY (V) 100 R DS(on) ( ) = 0.7 Q g (Max.) (nc) 16 Q gs (nc) 4.4 Q gd (nc) 7.7 Configuration Single TO0AB G DS ORDERING INFORMATION Package Lead (Pb)free SnPb G D S NChannel MOSFET

More information

Power MOSFET FEATURES. IRF740PbF SiHF740-E3 IRF740 SiHF740. PARAMETER SYMBOL LIMIT UNIT Drain-Source Voltage V DS 400 V Gate-Source Voltage V GS ± 20

Power MOSFET FEATURES. IRF740PbF SiHF740-E3 IRF740 SiHF740. PARAMETER SYMBOL LIMIT UNIT Drain-Source Voltage V DS 400 V Gate-Source Voltage V GS ± 20 Power MOSFET PRODUCT SUMMARY (V) 400 R DS(on) (Ω) = 0.55 Q g (Max.) (nc) 63 Q gs (nc) 9.0 Q gd (nc) 3 Configuration Single FEATURES Dynamic dv/dt Rating Repetitive Avalanche Rated Fast Switching Ease of

More information

Power MOSFET. IRF9520PbF SiHF9520-E3 IRF9520 SiHF9520. PARAMETER SYMBOL LIMIT UNIT Drain-Source Voltage V DS - 100 V Gate-Source Voltage V GS ± 20

Power MOSFET. IRF9520PbF SiHF9520-E3 IRF9520 SiHF9520. PARAMETER SYMBOL LIMIT UNIT Drain-Source Voltage V DS - 100 V Gate-Source Voltage V GS ± 20 Power MOSFET PRODUCT SUMMARY (V) 100 R DS(on) ( ) = 10 V 0.60 Q g (Max.) (nc) 18 Q gs (nc) 3.0 Q gd (nc) 9.0 Configuration Single TO220AB G DS ORDERING INFORMATION Package Lead (Pb)free SnPb G S D PChannel

More information

Table 1. Absolute maximum ratings (T amb = 25 C) Symbol Parameter Value Unit. ISO 10605 - C = 330 pf, R = 330 Ω : Contact discharge Air discharge

Table 1. Absolute maximum ratings (T amb = 25 C) Symbol Parameter Value Unit. ISO 10605 - C = 330 pf, R = 330 Ω : Contact discharge Air discharge Automotive dual-line Transil, transient voltage suppressor (TVS) for CAN bus Datasheet - production data Complies with the following standards ISO 10605 - C = 150 pf, R = 330 Ω : 30 kv (air discharge)

More information

Pulse Proof Thick Film Chip Resistors

Pulse Proof Thick Film Chip Resistors Pulse Proof Thick Film Chip Resistors FEATURES High pulse performance, up to kw Stability R/R 1 % for h at 70 C AEC-Q200 qualified Material categorization: for definitions of compliance please see www.vishay.com/doc?99912

More information

700 MHz, -3 db Bandwidth; Dual SPDT Analog Switch

700 MHz, -3 db Bandwidth; Dual SPDT Analog Switch 7 MHz, -3 db Bandwidth; Dual SPDT Analog Switch DESCRIPTION is a low R ON, high bandwidth analog switch configured in dual SPDT. It achieves 5.5 Ω switch on resistance, greater than 7 MHz -3 db bandwidth

More information

Insulated Precision Wirewound Resistors Axial Leads

Insulated Precision Wirewound Resistors Axial Leads Insulated Precision Wirewound Resistors Axial Leads In wirewound precision resistors, the series holds a leading position in professional applications whenever an excellent stability of the ohmic value

More information

High-speed switching diodes. Type number Package Configuration Package NXP JEITA JEDEC

High-speed switching diodes. Type number Package Configuration Package NXP JEITA JEDEC Rev. 8 18 November 2010 Product data sheet 1. Product profile 1.1 General description, encapsulated in small Surface-Mounted Device (SMD) plastic packages. Table 1. Product overview Type number Package

More information

Thick Film Resistor Networks, Military, MIL-PRF-83401 Qualified, Type RZ010 and RZ020 Dual-In-Line, Molded DIP

Thick Film Resistor Networks, Military, MIL-PRF-83401 Qualified, Type RZ010 and RZ020 Dual-In-Line, Molded DIP MDM (Military M831/1 and /2) Thick Film Resistor Networks, Military, MIL-PRF-831 Qualified, Type RZ1 and RZ2 Dual-In-Line, Molded DIP STANDARD ELECTRICAL SPECIFICATIONS VISHAY DALE MODEL/ PIN NO. MIL STYLE

More information

LC03-6R2G. Low Capacitance Surface Mount TVS for High-Speed Data Interfaces. SO-8 LOW CAPACITANCE VOLTAGE SUPPRESSOR 2 kw PEAK POWER 6 VOLTS

LC03-6R2G. Low Capacitance Surface Mount TVS for High-Speed Data Interfaces. SO-8 LOW CAPACITANCE VOLTAGE SUPPRESSOR 2 kw PEAK POWER 6 VOLTS Low Capacitance Surface Mount TVS for High-Speed Data terfaces The LC3- transient voltage suppressor is designed to protect equipment attached to high speed communication lines from ESD, EFT, and lighting.

More information

High-Bandwidth, Low Voltage, Dual SPDT Analog Switches

High-Bandwidth, Low Voltage, Dual SPDT Analog Switches DG, DG High-Bandwidth, Low Voltage, Dual SPDT Analog Switches DESCRIPTION The DG/DG are monolithic CMOS dual single-pole/double-throw (SPDT) analog switchs. They are specifically designed for low-voltage,

More information

DG2706. High Speed, Low Voltage, 3, Quad SPDT CMOS Analog Switch. Vishay Siliconix DESCRIPTION FEATURES APPLICATIONS

DG2706. High Speed, Low Voltage, 3, Quad SPDT CMOS Analog Switch. Vishay Siliconix DESCRIPTION FEATURES APPLICATIONS High Speed, Low Voltage, 3, Quad SPDT CMOS Analog Switch DESCRIPTION The DG2706 is a high speed, low voltage, low On-resistance, quad SPDT (single pole double throw) analog switch. It operates from a.6

More information

TSM2N7002K 60V N-Channel MOSFET

TSM2N7002K 60V N-Channel MOSFET SOT-23 SOT-323 Pin Definition: 1. Gate 2. Source 3. Drain PRODUCT SUMMARY V DS (V) R DS(on) (Ω) I D (ma) 5 @ V GS = 10V 100 60 5.5 @ V GS = 5V 100 Features Low On-Resistance ESD Protection High Speed Switching

More information

LC05-6. Dual Low Capacitance TVS Array for Telecom Line-Card Applications. PROTECTION PRODUCTS Description. Features. Mechanical Characteristics

LC05-6. Dual Low Capacitance TVS Array for Telecom Line-Card Applications. PROTECTION PRODUCTS Description. Features. Mechanical Characteristics Description The LC5-6 has been specifically designed to protect sensitive components which are connected to highspeed telecommunications lines from over voltages caused by lightning, electrostatic discharge

More information

Optocoupler, Phototransistor Output, with Base Connection

Optocoupler, Phototransistor Output, with Base Connection CNY7 Optocoupler, Phototransistor FEATURES Isolation test voltage 5 V RMS A 6 B Long term stability i79 C NC 5 C E Industry standard dual-in-line package Lead (Pb-free component Component in accordance

More information

1N5820, 1N5821, 1N5822. Axial Lead Rectifiers SCHOTTKY BARRIER RECTIFIERS 3.0 AMPERES 20, 30, 40 VOLTS

1N5820, 1N5821, 1N5822. Axial Lead Rectifiers SCHOTTKY BARRIER RECTIFIERS 3.0 AMPERES 20, 30, 40 VOLTS 1N58, 1N5821, 1N5822 1N58 and 1N5822 are Preferred Devices Rectifiers This series employs the Schottky Barrier principle in a large area metal-to-silicon power diode. State-of-the-art geometry features

More information

Power MOSFET FEATURES. IRFSL11N50APbF SiHFSL11N50A-E3. PARAMETER SYMBOL LIMIT UNIT Drain-Source Voltage V DS 500 V Gate-Source Voltage V GS ± 30

Power MOSFET FEATURES. IRFSL11N50APbF SiHFSL11N50A-E3. PARAMETER SYMBOL LIMIT UNIT Drain-Source Voltage V DS 500 V Gate-Source Voltage V GS ± 30 Power MOFET IRFL11N50, ihfl11n50 PRODUCT UMMRY V D (V) 500 R D(on) ( ) V G = 10 V 0.55 Q g (Max.) (nc) 51 Q gs (nc) 12 Q gd (nc) 23 Configuration ingle I 2 PK (TO262) G D FETURE Dynamic dv/dt Rating Repetitive

More information

DG2731/2732/2733. Low Voltage, 0.4 Ω, Dual SPDT Analog Switch. Vishay Siliconix. RoHS COMPLIANT FEATURES

DG2731/2732/2733. Low Voltage, 0.4 Ω, Dual SPDT Analog Switch. Vishay Siliconix. RoHS COMPLIANT FEATURES Low Voltage, 0.4 Ω, Dual SPDT Analog Switch DG273/2732/2733 DESCRIPTION The DG273/2732/2733 are low voltage, low on-resistance, dual single-pole/double-throw (SPDT) monolithic CMOS analog switches designed

More information

Custom Products. Magnetic Components. Vishay Dale. www.vishay.com

Custom Products. Magnetic Components. Vishay Dale. www.vishay.com Magnetic Components SWITCH MODE MAGNETICS AIR CORE INDUCTORS INDUCTIVE PRODUCTS CUSTOM DESIGN AND PRODUCTION has extensive facilities for custom design and production of custom magnetics. Design applications

More information

NTC Thermistors, Radial Leaded and Coated

NTC Thermistors, Radial Leaded and Coated M, C, T NTC Thermistors, Radial Leaded and Coated FEATURES Small size - conformally coated Wide resistance range Available in 11 different R-T curves Available in point matched and curve tracking precision

More information

DG2302. High-Speed, Low r ON, SPST Analog Switch. Vishay Siliconix. (1-Bit Bus Switch with Level-Shifter) RoHS* COMPLIANT DESCRIPTION FEATURES

DG2302. High-Speed, Low r ON, SPST Analog Switch. Vishay Siliconix. (1-Bit Bus Switch with Level-Shifter) RoHS* COMPLIANT DESCRIPTION FEATURES High-Speed, Low r ON, SPST Analog Switch (1-Bit Bus Switch with Level-Shifter) DG2302 DESCRIPTION The DG2302 is a high-speed, 1-bit, low power, TTLcompatible bus switch. Using sub-micron CMOS technology,

More information

High-Speed, Low r ON, SPST Analog Switch (1-Bit Bus Switch)

High-Speed, Low r ON, SPST Analog Switch (1-Bit Bus Switch) High-Speed, Low r ON, SPST Analog Switch (1-Bit Bus Switch) DG2301 ishay Siliconix DESCRIPTION The DG2301 is a high-speed, 1-bit, low power, TTLcompatible bus switch. Using sub-micron CMOS technology,

More information

DG2515, DG2516. 3-Ω, 235-MHz Bandwidth, Dual SPDT Analog Switch. Vishay Siliconix. Not for New Design. RoHS COMPLIANT DESCRIPTION FEATURES BENEFITS

DG2515, DG2516. 3-Ω, 235-MHz Bandwidth, Dual SPDT Analog Switch. Vishay Siliconix. Not for New Design. RoHS COMPLIANT DESCRIPTION FEATURES BENEFITS Not for New Design DG, DG -Ω, -MHz Bandwidth, Dual SPDT Analog Switch DESCRIPTION The DG, DG are low-voltage dual single-pole/ double-throw monolithic CMOS analog switches. Designed to operate from.8 V

More information

LC03-6. Low Capacitance TVS for High-Speed Data Interfaces. Features. Description. Mechanical Characteristics. Applications

LC03-6. Low Capacitance TVS for High-Speed Data Interfaces. Features. Description. Mechanical Characteristics. Applications Description The LC0- transient voltage suppressor is designed to protect components which are connected to high speed telecommunication lines from voltage surges caused by lightning, electrostatic discharge

More information

N-Channel 20-V (D-S) 175 C MOSFET

N-Channel 20-V (D-S) 175 C MOSFET N-Channel -V (D-S) 75 C MOSFET SUD7N-4P PRODUCT SUMMARY V DS (V) r DS(on) ( ) (A) a.37 @ V GS = V 37.6 @ V GS = 4.5 V 9 TO-5 D FEATURES TrenchFET Power MOSFET 75 C Junction Temperature PWM Optimized for

More information

N-Channel 60-V (D-S), 175 C MOSFET

N-Channel 60-V (D-S), 175 C MOSFET N-Channel 6-V (D-S), 75 C MOSFET SUP/SUB7N6-4 V (BR)DSS (V) r DS(on) ( ) (A) 6.4 7 a TO-22AB D TO-263 DRAIN connected to TAB G G D S Top View SUP7N6-4 G D S Top View SUB7N6-4 S N-Channel MOSFET Parameter

More information

DDSL01. Secondary protection for DSL lines. Features. Description

DDSL01. Secondary protection for DSL lines. Features. Description Secondary protection for DSL lines Features Stand off voltage: 30 V Surge capability: I pp = 30 A 8/20 µs Low capacitance device: 4.5 pf at 2 V RoHS package Low leakage current: 0.5 µa at 25 C 3 2 Description

More information

NUP4106. Low Capacitance Surface Mount TVS for High-Speed Data Interfaces SO 8 LOW CAPACITANCE VOLTAGE SUPPRESSOR 500 WATTS PEAK POWER 3.

NUP4106. Low Capacitance Surface Mount TVS for High-Speed Data Interfaces SO 8 LOW CAPACITANCE VOLTAGE SUPPRESSOR 500 WATTS PEAK POWER 3. Low Capacitance Surface Mount TVS for High-Speed Data Interfaces The NUP0 transient voltage suppressor is designed to protect equipment attached to high speed communication lines from ESD and lightning.

More information

Description YD/T 950. YD/T 993 YD/T 1082 GR 1089 Inter-building GR 1089 Intra-building IEC 61000-4-2 V V DRM. @250V/µs I H

Description YD/T 950. YD/T 993 YD/T 1082 GR 1089 Inter-building GR 1089 Intra-building IEC 61000-4-2 V V DRM. @250V/µs I H SDP Series - SOT23-5 RoHS Pb e3 Description This new SIDACtor series is targeted for the tertiary or line driver side protection position for VDSL2+, ADSL2 applications and general I/O protection functions.

More information

SK54B SCHOTTKY RECTIFIER

SK54B SCHOTTKY RECTIFIER Applications: SCHOTTKY RECTIFIER Features: Switching power supply Converters Free-Wheeling diodes Reverse battery protection Disk drives Battery charging Small foot print, surface mountable Very low forward

More information

Dual P-Channel 2.5 V (G-S) MOSFET

Dual P-Channel 2.5 V (G-S) MOSFET Si593DC Dual P-Channel.5 V (G-S) MOSFET PRODUCT SUMMARY V DS (V) R DS(on) (Ω) I D (A).55 at V GS = -.5 V ±.9 -.8 at V GS = - 3.6 V ±.7.6 at V GS = -.5 V ±. FEATURES Halogen-free According to IEC 69-- Definition

More information

DISCRETE SEMICONDUCTORS DATA SHEET. BT151 series C Thyristors

DISCRETE SEMICONDUCTORS DATA SHEET. BT151 series C Thyristors DISCRETE SEMICONDUCTORS DATA SHEET Product specification April 24 Product specification GENERAL DESCRIPTION QUICK REFERENCE DATA Passivated thyristors in a plastic SYMBOL PARAMETER MAX. MAX. MAX. UNIT

More information

SCHOTTKY BARRIER RECTIFIERS 1.0 AMPERE 20, 30 and 40 VOLTS

SCHOTTKY BARRIER RECTIFIERS 1.0 AMPERE 20, 30 and 40 VOLTS 1N5817 and 1N5819 are Preferred Devices... employing the Schottky Barrier principle in a large area metal to silicon power diode. State of the art geometry features chrome barrier metal, epitaxial construction

More information

TSM020N03PQ56 30V N-Channel MOSFET

TSM020N03PQ56 30V N-Channel MOSFET PDFN56 Pin Definition: 1. Source 8. Drain 2. Source 7. Drain 3. Source 6. Drain 4. Gate 5. Drain Key Parameter Performance Parameter Value Unit V DS 30 V R DS(on) (max) V GS = 10V 2 V GS = 4.5V 3 mω Q

More information

NTMS4920NR2G. Power MOSFET 30 V, 17 A, N Channel, SO 8 Features

NTMS4920NR2G. Power MOSFET 30 V, 17 A, N Channel, SO 8 Features NTMS9N Power MOSFET 3 V, 7 A, N Channel, SO Features Low R DS(on) to Minimize Conduction Losses Low Capacitance to Minimize Driver Losses Optimized Gate Charge to Minimize Switching Losses These Devices

More information

BAS16 series. 1. Product profile. High-speed switching diodes. 1.1 General description. 1.2 Features and benefits. 1.

BAS16 series. 1. Product profile. High-speed switching diodes. 1.1 General description. 1.2 Features and benefits. 1. Rev. 6 4 September 04 Product data sheet. Product profile. General description, encapsulated in small Surface-Mounted Device (SMD) plastic packages. Table. Product overview Type number Package Configuration

More information

PINNING - TO220AB PIN CONFIGURATION SYMBOL

PINNING - TO220AB PIN CONFIGURATION SYMBOL BTA4 series GENERAL DESCRIPTION QUICK REFERENCE DATA Passivated triacs in a plastic envelope, SYMBOL PARAMETER MAX. MAX. UNIT intended for use in applications requiring high bidirectional transient and

More information

RClamp0504P RailClamp Low Capacitance TVS Array

RClamp0504P RailClamp Low Capacitance TVS Array - RailClamp Description RailClamps are low capacitance TVS arrays designed to protect high speed data interfaces. This series has been specifically designed to protect sensitive components which are connected

More information

DSL01-xxxSC5. Secondary protection for DSL lines. Features. Description. Applications. Benefits. Complies with the following standards

DSL01-xxxSC5. Secondary protection for DSL lines. Features. Description. Applications. Benefits. Complies with the following standards -xxxsc5 Secondary protection for DSL lines Features Low capacitance devices: -xxxsc5: Delta C typ = 3.5 pf High surge capability: 30 A - 8/20 µs Voltage: 8 V, 10.5 V, 16 V, and 24 V RoHS package Benefits

More information

S112-XHS. Description. Features. Agency Approvals. Applications. Absolute Maximum Ratings. Schematic Diagram. Ordering Information

S112-XHS. Description. Features. Agency Approvals. Applications. Absolute Maximum Ratings. Schematic Diagram. Ordering Information Description Features The S112-X is a bi-directional, single-pole, single-throw, normally open multipurpose solid-state relay. The circuit is composed of one input IR LED with a series limiting resistor

More information

Metal Film Resistors, Military, MIL-R-10509 Qualified, Precision, Type RN and MIL-PRF-22684 Qualified, Type RL

Metal Film Resistors, Military, MIL-R-10509 Qualified, Precision, Type RN and MIL-PRF-22684 Qualified, Type RL Metal Film Resistors, Military, Qualified, Precision, Type RN and Qualified, Type RL FEATURES Very low noise (- 40 db) Very low voltage coefficient (5 ppm/v) Controlled temperature coefficient Flame retardant

More information

ESD7484. 4-Line Ultra-Large Bandwidth ESD Protection

ESD7484. 4-Line Ultra-Large Bandwidth ESD Protection 4-Line Ultra-Large Bandwidth ESD Protection Functional Description The ESD7484 chip is a monolithic, application specific discrete device dedicated to ESD protection of the HDMI connection. It also offers

More information

LC01-6. Low Capacitance TVS for High-Speed Telecommunication Systems. PROTECTION PRODUCTS Description. Features. Applications

LC01-6. Low Capacitance TVS for High-Speed Telecommunication Systems. PROTECTION PRODUCTS Description. Features. Applications escription The transient voltage suppressor is designed to protect components which are connected to high speed telecommunication lines from voltage surges caused by lightning, electrostatic discharge

More information

STB4NK60Z, STB4NK60Z-1, STD4NK60Z STD4NK60Z-1, STP4NK60Z,STP4NK60ZFP

STB4NK60Z, STB4NK60Z-1, STD4NK60Z STD4NK60Z-1, STP4NK60Z,STP4NK60ZFP STB4NK60Z, STB4NK60Z-1, STD4NK60Z STD4NK60Z-1, STP4NK60Z,STP4NK60ZFP N-channel 600 V - 1.76 Ω - 4 A SuperMESH Power MOSFET DPAK - D 2 PAK - IPAK - I 2 PAK - TO-220 - TO-220FP Features Type V DSS R DS(on)

More information

ETP01-xx21. Protection for Ethernet lines. Features. Description. Applications. Benefits. Complies with the following standards

ETP01-xx21. Protection for Ethernet lines. Features. Description. Applications. Benefits. Complies with the following standards ETP0-xx2 Protection for Ethernet lines Features Differential and common mode protection Telcordia GR089 Intrabuilding: 50 A, 2/0 µs ITU-T K20/2: 40 A, 5/30 µs Low capacitance: 3 pf max at 0 V UL94 V0 approved

More information

Y.LIN ELECTRONICS CO.,LTD.

Y.LIN ELECTRONICS CO.,LTD. Features Current transfer ratio (CTR 50~600% at I F =5mA, V CE =5V) High isolation voltage between input and output (Viso=5000 V rms ) Creepage distance >7.62 mm Operating temperature up to +110 C Compact

More information

STPS40L15CW. 2 x 20 Amps SCHOTTKY RECTIFIER. Case Styles. I F(AV) = 40Amp V R = 15V. Bulletin PD-20622 rev. B 10/06. Description/ Features

STPS40L15CW. 2 x 20 Amps SCHOTTKY RECTIFIER. Case Styles. I F(AV) = 40Amp V R = 15V. Bulletin PD-20622 rev. B 10/06. Description/ Features Bulletin PD-20622 rev. B 0/06 STPS40L5CW SCHOTTKY RECTIFIER 2 x 20 Amps I F(AV) = 40Amp V R = 5V Major Ratings and Characteristics Characteristics Values Units I F(AV) Rectangular 40 A waveform V RRM 5

More information

Metal-Oxide Varistors (MOVs) Surface Mount Multilayer Varistors (MLVs) > MLN Series. MLN SurgeArray TM Suppressor. Description

Metal-Oxide Varistors (MOVs) Surface Mount Multilayer Varistors (MLVs) > MLN Series. MLN SurgeArray TM Suppressor. Description MLN SurgeArray TM Suppressor RoHS Description The MLN SurgeArray Suppressor is designed to help protect components from transient voltages that exist at the circuit board level. This device provides four

More information

logic level for RCD/ GFI applications

logic level for RCD/ GFI applications logic level for RCD/ GFI applications BT68 series GENERAL DESCRIPTION QUICK REFERENCE DATA Glass passivated, sensitive gate SYMBOL PARAMETER MAX. MAX. MAX. MAX. UNIT thyristors in a plastic envelope, intended

More information

AN2703 Application note

AN2703 Application note Application note list for SCRs, TRIACs, AC switches, and DIACS Introduction All datasheet parameters are rated as minimum or maximum values, corresponding to the product parameter distribution. In each

More information

TPI. Tripolar protection for ISDN interfaces. Features. Description. Complies with following standards. Benefits

TPI. Tripolar protection for ISDN interfaces. Features. Description. Complies with following standards. Benefits Tripolar protection for ISDN interfaces Features Bidirectional triple crowbar protection Peak pulse current: I PP = 30, 10/1000 µs Breakdown voltage: TPI80N: 80 V TPI120N: 120 V vailable in SO-8 package

More information

IR Receiver Modules for Remote Control Systems

IR Receiver Modules for Remote Control Systems IR Receiver Modules for Remote Control Systems FEATURES Very low supply current Photo detector and preamplifier in one package Internal filter for PCM frequency Supply voltage: 2.5 V to 5.5 V Improved

More information

LM134-LM234-LM334. Three terminal adjustable current sources. Features. Description

LM134-LM234-LM334. Three terminal adjustable current sources. Features. Description Three terminal adjustable current sources Features Operates from 1V to 40V 0.02%/V current regulation Programmable from 1µA to 10mA ±3% initial accuracy Description The LM134/LM234/LM334 are 3-terminal

More information

TISP4500H3BJ Overvoltage Protector

TISP4500H3BJ Overvoltage Protector *RoHS COMPLINT TISP4500H3BJ BIDIRECTIONL THYRISTOR OVERVOLTGE PROTECTORS TISP4500H3BJ Overvoltage Protector Non-Conductive During K.20/21/45 Power Contact Test - Off-State Voltage... >245 V rms - For Controlled

More information

TOSHIBA Transistor Silicon PNP Epitaxial Type (PCT Process) 2SA1020

TOSHIBA Transistor Silicon PNP Epitaxial Type (PCT Process) 2SA1020 2SA12 TOSHIBA Transistor Silicon PNP Epitaxial Type (PCT Process) 2SA12 Power Amplifier Applications Power Switching Applications Unit: mm Low Collector saturation voltage: V CE (sat) =.5 V (max) (I C

More information

STTH3R02QRL. Ultrafast recovery diode. Main product characteristics. Features and benefits. Description. Order codes DO-15 STTH3R02Q DO-201AD STTH3R02

STTH3R02QRL. Ultrafast recovery diode. Main product characteristics. Features and benefits. Description. Order codes DO-15 STTH3R02Q DO-201AD STTH3R02 Ultrafast recovery diode Main product characteristics I F(V) 3 V RRM 2 V T j (max) V F (typ) 175 C.7 V K t rr (typ) 16 ns Features and benefits Very low conduction losses Negligible switching losses K

More information

STPS20L15DPbF SCHOTTKY RECTIFIER. Case Styles. I F(AV) = 20Amp V R = 15V. Bulletin PD-20873 rev. A 02/07. Major Ratings and Characteristics

STPS20L15DPbF SCHOTTKY RECTIFIER. Case Styles. I F(AV) = 20Amp V R = 15V. Bulletin PD-20873 rev. A 02/07. Major Ratings and Characteristics STPS20L5DPbF SCHOTTKY RECTIFIER 20 Amps I F(AV) = 20Amp V R = 5V Major Ratings and Characteristics Characteristics Values Units I F(AV) Rectangular 20 A waveform V RRM 5 V I FSM @ tp = 5 μs sine 700 A

More information

8ETH06 8ETH06S 8ETH06-1 8ETH06FP

8ETH06 8ETH06S 8ETH06-1 8ETH06FP Bulletin PD-0746 rev. D 03/03 8ETH06 8ETH06S 8ETH06-8ETH06FP Hyperfast Rectifier Features Hyperfast Recovery Time Low Forward Voltage Drop Low Leakage Current 75 C Operating unction Temperature UL E78996

More information

Obsolete Product(s) - Obsolete Product(s)

Obsolete Product(s) - Obsolete Product(s) Vertical deflection booster for 3 App TV/monitor applications with 0 V flyback generator Features Figure. Heptawatt package Power amplifier Flyback generator Stand-by control Output current up to 3.0 App

More information

Features. Symbol JEDEC TO-220AB

Features. Symbol JEDEC TO-220AB Data Sheet June 1999 File Number 2253.2 3A, 5V,.4 Ohm, N-Channel Power MOSFET This is an N-Channel enhancement mode silicon gate power field effect transistor designed for applications such as switching

More information

PHOTOTRANSISTOR OPTOCOUPLERS

PHOTOTRANSISTOR OPTOCOUPLERS MCT2 MCT2E MCT20 MCT27 WHITE PACKAGE (-M SUFFIX) BLACK PACKAGE (NO -M SUFFIX) DESCRIPTION The MCT2XXX series optoisolators consist of a gallium arsenide infrared emitting diode driving a silicon phototransistor

More information

SSM3K335R SSM3K335R. 1. Applications. 2. Features. 3. Packaging and Pin Configuration. 2012-07-19 Rev.3.0. Silicon N-Channel MOS (U-MOS -H)

SSM3K335R SSM3K335R. 1. Applications. 2. Features. 3. Packaging and Pin Configuration. 2012-07-19 Rev.3.0. Silicon N-Channel MOS (U-MOS -H) MOSFETs Silicon N-Channel MOS (U-MOS-H) SSM3K335R SSM3K335R 1. Applications Power Management Switches DC-DC Converters 2. Features (1) 4.5-V gate drive voltage. (2) Low drain-source on-resistance : R DS(ON)

More information

2 Port, USB 2.0 High Speed (480 Mbps) Switch, DPDT Analog Switch

2 Port, USB 2.0 High Speed (480 Mbps) Switch, DPDT Analog Switch 2 Port, UB 2. High peed (48 Mbps) witch, DPDT Analog witch DG2722 DECRIPTION The DG2722 is 2 port high speed analog switch optimized for UB 2. signal switching. The DG2722 switch is configured in DPDT.

More information

Reflective Optical Sensor with Transistor Output

Reflective Optical Sensor with Transistor Output Reflective Optical Sensor with Transistor Output CNY7 Description The CNY7 is a reflective sensor that includes an infrared emitter and phototransistor in a leaded package which blocks visible light. E

More information

logic level for RCD/ GFI/ LCCB applications

logic level for RCD/ GFI/ LCCB applications logic level for RCD/ GFI/ LCCB applications BT68W series GENERAL DESCRIPTION QUICK REFERENCE DATA Glass passivated, sensitive gate SYMBOL PARAMETER MAX. MAX. MAX. MAX. UNIT thyristors in a plastic envelope

More information

STP10NK80ZFP STP10NK80Z - STW10NK80Z

STP10NK80ZFP STP10NK80Z - STW10NK80Z STP10NK80ZFP STP10NK80Z - STW10NK80Z N-channel 800V - 0.78Ω - 9A - TO-220/FP-TO-247 Zener-protected supermesh TM MOSFET General features Type V DSS R DS(on) I D Pw STP10NK80Z 800V

More information

OptiMOS 3 Power-Transistor

OptiMOS 3 Power-Transistor Type IPD36N4L G OptiMOS 3 Power-Transistor Features Fast switching MOSFET for SMPS Optimized technology for DC/DC converters Qualified according to JEDEC ) for target applications Product Summary V DS

More information

TOSHIBA Bipolar Linear Integrated Circuit Silicon Monolithic TAR5SB15~TAR5SB50

TOSHIBA Bipolar Linear Integrated Circuit Silicon Monolithic TAR5SB15~TAR5SB50 TOSHIBA Bipolar Linear Integrated Circuit Silicon Monolithic TARSB~TARSB Point Regulators (Low-Dropout Regulator) TARSB~TARSB The TARSBxx Series is comprised of general-purpose bipolar single-power-supply

More information

Axial and Radial Leaded Multilayer Ceramic Capacitors for Automotive Applications Class 1 and Class 2, 50 V DC, 100 V DC and 200 V DC

Axial and Radial Leaded Multilayer Ceramic Capacitors for Automotive Applications Class 1 and Class 2, 50 V DC, 100 V DC and 200 V DC Axial and Radial Leaded Multilayer Ceramic Capacitors for Automotive Applications Class 1 and Class 2, 5 V DC, 1 V DC and 2 V DC DESIGNING For more than 2 years Vitramon has supported the automotive industry

More information

TISP4600F3, TISP4700F3 OBSOLETE

TISP4600F3, TISP4700F3 OBSOLETE *RoHS COMPLIANT TISP4600F3, TISP4700F3 HIGH OLTAGE BIDIRECTIONAL THYRISTOR OEROLTAGE PROTECTORS TISP4600F3, TISP4700F3 Ion-Implanted Breakdown Region Precise and Stable oltage Low oltage Overshoot under

More information

LM1084 5A Low Dropout Positive Regulators

LM1084 5A Low Dropout Positive Regulators 5A Low Dropout Positive Regulators General Description The LM1084 is a series of low dropout voltage positive regulators with a maximum dropout of 1.5 at 5A of load current. It has the same pin-out as

More information

TPN4R712MD TPN4R712MD. 1. Applications. 2. Features. 3. Packaging and Internal Circuit. 2014-12 2015-04-21 Rev.4.0. Silicon P-Channel MOS (U-MOS )

TPN4R712MD TPN4R712MD. 1. Applications. 2. Features. 3. Packaging and Internal Circuit. 2014-12 2015-04-21 Rev.4.0. Silicon P-Channel MOS (U-MOS ) MOSFETs Silicon P-Channel MOS (U-MOS) TPN4R712MD TPN4R712MD 1. Applications Lithium-Ion Secondary Batteries Power Management Switches 2. Features (1) Low drain-source on-resistance: R DS(ON) = 3.8 mω (typ.)

More information

IDB45E60. Fast Switching EmCon Diode. Product Summary V RRM 600 V I F 45 A V F 1.5 V T jmax 175 C

IDB45E60. Fast Switching EmCon Diode. Product Summary V RRM 600 V I F 45 A V F 1.5 V T jmax 175 C Fast Switching EmCon Diode Feature 600 V EmCon technology Fast recovery Soft switching Low reverse recovery charge Low forward voltage 175 C operating temperature Easy paralleling Product Summary V RRM

More information

UNISONIC TECHNOLOGIES CO., LTD 50N06 Power MOSFET

UNISONIC TECHNOLOGIES CO., LTD 50N06 Power MOSFET UNISONIC TECHNOLOGIES CO., LTD 50N06 50 Amps, 60 Volts N-CHANNEL POWER MOSFET DESCRIPTION TO-263 TO-25 The UTC 50N06 is three-terminal silicon device with current conduction capability of about 50A, fast

More information

IDB04E120. Fast Switching EmCon Diode. Product Summary V RRM 1200 V I F 4 A V F 1.65 V T jmax 150 C

IDB04E120. Fast Switching EmCon Diode. Product Summary V RRM 1200 V I F 4 A V F 1.65 V T jmax 150 C Fast Switching EmCon Diode Feature 12 V EmCon technology Fast recovery Soft switching Low reverse recovery charge Low forward voltage Easy paralleling Product Summary V RRM 12 V I F 4 V F 1.65 V T jmax

More information

TOSHIBA Insulated Gate Bipolar Transistor Silicon N Channel IGBT GT60J323

TOSHIBA Insulated Gate Bipolar Transistor Silicon N Channel IGBT GT60J323 GT6J2 TOSHIBA Insulated Gate Bipolar Transistor Silicon N Channel IGBT GT6J2 Current Resonance Inverter Switching Application Unit: mm Enhancement mode type High speed : t f =.6 μs (typ.) (I C = 6A) Low

More information

2N6387, 2N6388. Plastic Medium-Power Silicon Transistors DARLINGTON NPN SILICON POWER TRANSISTORS 8 AND 10 AMPERES 65 WATTS, 60-80 VOLTS

2N6387, 2N6388. Plastic Medium-Power Silicon Transistors DARLINGTON NPN SILICON POWER TRANSISTORS 8 AND 10 AMPERES 65 WATTS, 60-80 VOLTS 2N6388 is a Preferred Device Plastic MediumPower Silicon Transistors These devices are designed for generalpurpose amplifier and lowspeed switching applications. Features High DC Current Gain h FE = 2500

More information

BD241A BD241C. NPN power transistors. Features. Applications. Description. NPN transistors. Audio, general purpose switching and amplifier transistors

BD241A BD241C. NPN power transistors. Features. Applications. Description. NPN transistors. Audio, general purpose switching and amplifier transistors BD241A BD241C NPN power transistors Features. NPN transistors Applications Audio, general purpose switching and amplifier transistors Description The devices are manufactured in Planar technology with

More information

logic level for RCD/ GFI/ LCCB applications

logic level for RCD/ GFI/ LCCB applications logic level for RCD/ GFI/ LCCB applications BT68GW GENERL DESCRIPTION QUICK REFERENCE DT Passivated, sensitive gate thyristor in a plastic SYMBOL PRMETER MX. UNIT envelope suitable for surface mounting,

More information

Gas Discharge Tubes GTCX36-XXXM-R05 Series

Gas Discharge Tubes GTCX36-XXXM-R05 Series GTCX36-XXXM-R05 Series TE Circuit Protection 6mm 3Pole GDTs (ceramic gas discharge tubes), are commonly used to help protect sensitive telecom equipment such as communication lines, signal lines and data

More information

TISP9110LDM Overvoltage Protector

TISP9110LDM Overvoltage Protector *RoHS COMPLINT TISP9110LDM INTEGRTED COMPLEMENTRY BUFFERED-GTE SCRS FOR DUL POLRITY SLIC OEROLTGE PROTECTION TISP9110LDM Overvoltage Protector High Performance Protection for SLICs with +ve and -ve Battery

More information

ULN2801A, ULN2802A, ULN2803A, ULN2804A

ULN2801A, ULN2802A, ULN2803A, ULN2804A ULN2801A, ULN2802A, ULN2803A, ULN2804A Eight Darlington array Datasheet production data Features Eight Darlington transistors with common emitters Output current to 500 ma Output voltage to 50 V Integral

More information

IDB30E120. Fast Switching EmCon Diode. Product Summary V RRM 1200 V I F 30 A V F 1.65 V T jmax 150 C

IDB30E120. Fast Switching EmCon Diode. Product Summary V RRM 1200 V I F 30 A V F 1.65 V T jmax 150 C Fast Switching EmCon Diode Feature 1200 V EmCon technology Fast recovery Soft switching Low reverse recovery charge Low forward voltage Easy paralleling Product Summary V RRM 1200 V I F 30 V F 1.65 V T

More information

FEATURES 200 % 175 % 150 % 125 % 100 % 75 % 50 % 25 %

FEATURES 200 % 175 % 150 % 125 % 100 % 75 % 50 % 25 % Ultra High Precision Z-Foil Resistor with TCR of ± 0.05 ppm/ C, PCR of 5 ppm at Rated Power, Tolerance of ± 0.005 % and Load Life Stability of ± 0.005 % INDUSTRY BREAKTHROUGH Any value at any tolerance

More information

Optocoupler, Phototransistor Output, With Base Connection

Optocoupler, Phototransistor Output, With Base Connection IL/ IL2/ IL5 Optocoupler, Phototransistor Output, With Base Connection Features Current Transfer Ratio (see order information) Isolation Test Voltage 5300 V RMS Lead-free component Component in accordance

More information

I T(AV) off-state voltages. PINNING - TO92 variant PIN CONFIGURATION SYMBOL. 3 anode g

I T(AV) off-state voltages. PINNING - TO92 variant PIN CONFIGURATION SYMBOL. 3 anode g BT9 series GENERL DESCRIPTION QUICK REFERENCE DT Passivated, sensitive gate thyristors in a SYMBOL PRMETER MX. MX. MX. UNIT plastic envelope, intended for use in general purpose switching and phase BT9

More information

MM74HCT373 MM74HCT374 3-STATE Octal D-Type Latch 3-STATE Octal D-Type Flip-Flop

MM74HCT373 MM74HCT374 3-STATE Octal D-Type Latch 3-STATE Octal D-Type Flip-Flop 3-STATE Octal D-Type Latch 3-STATE Octal D-Type Flip-Flop General Description The MM74HCT373 octal D-type latches and MM74HCT374 Octal D-type flip flops advanced silicongate CMOS technology, which provides

More information

IDB09E120. Fast Switching EmCon Diode. Product Summary V RRM 1200 V I F 9 A V F 1.65 V T jmax 150 C

IDB09E120. Fast Switching EmCon Diode. Product Summary V RRM 1200 V I F 9 A V F 1.65 V T jmax 150 C Fast Switching EmCon Diode Feature 1200 V EmCon technology Fast recovery Soft switching Low reverse recovery charge Low forward voltage Easy paralleling Product Summary V RRM 1200 V I F 9 V F 1.65 V T

More information

FEATURES BODY DIA. MAX. Type M AWG 30: 0.0100 [0.254] Type C AWG 28: 0.0126 [0.320] Type T AWG 30: 0.0100 [0.254]

FEATURES BODY DIA. MAX. Type M AWG 30: 0.0100 [0.254] Type C AWG 28: 0.0126 [0.320] Type T AWG 30: 0.0100 [0.254] M, C, T NTC Thermistors, Coated FEATURES Small size - conformally coated. Wide resistance range. Available in 11 different R-T curves. DESCRIPTION Models M, C, and T are conformally coated, leaded thermistors

More information

Description. Table 1. Device summary. Order codes. TO-220 (single gauge) TO-220 (double gauge) D²PAK (tape and reel) TO-220FP

Description. Table 1. Device summary. Order codes. TO-220 (single gauge) TO-220 (double gauge) D²PAK (tape and reel) TO-220FP 1.2 V to 37 V adjustable voltage regulators Description Datasheet - production data TO-220 TO-220FP The LM217, LM317 are monolithic integrated circuits in TO-220, TO-220FP and D²PAK packages intended for

More information

Features Benefits Description TO-247AC (Modified) Absolute Maximum Ratings Parameter Max Units

Features Benefits Description TO-247AC (Modified) Absolute Maximum Ratings Parameter Max Units Bulletin PD -.338 rev. B /4 HEXFRED TM HFA5PB6 Ultrafast, Soft Recovery Diode Features Ultrafast Recovery Ultrasoft Recovery Very Low I RRM Very Low Q rr Specified at Operating Conditions Benefits Reduced

More information