mphenol erospace I-- ircular onnect Overview igh peed I ilter rinted 5015 83723 III 26482 iber Optics ransient ircuit oard 26500 yle rimp ear ontacts elease atrix atrix yle atrix 2 I II III mphenol onnects are ideally suited f the incpation of shielded contacts f high perfmance interconnection applications. he circular family is built around I-- specifications, with il-approved and commercial styles offered. mal operating voltage f circulars with power contacts only is up to 900 () at sea level. he I-- family offer these features f contact termination flexibility: Widest selection of insert arrangements that can incpate: ize 8 high speed Quadrax and ifferential winax contacts f I-- eries III (specially modified to accommodate keyed contacts) ransition adapters f use in attaching eries III connects with high speed quadrax differential contacts to boards ize 8, 12 and 16 oax contacts ize 8 and 12 winax contacts ize 8, 10 & 12 riax contacts Wide selection of connect shell styles and sizes coop-roof recessed design in -, - and - connects provide protection f contacts tandard power contacts are crimp rear release, qualified to 39029 oax, winax, and riax contacts employ the same retention system as power contacts, simplifying user substitution OI IOIO mphenol I--, which feature rear removable contacts, are nmally supplied with a full complement of power contacts, separately packaged. oax, twinax and triax contacts are dered by part number as referenced in the part number charts on the fol lowing pages of this catalog, and are substituted f the power contacts at the time of the cable equipment assembly. If the application is f coax, twinax triax contacts only, the connect may be dered less contacts and no power contacts will be supplied. OW O O OO I QY O elect the ircular eries desired. (ee features of each series given briefly on this page and in-depth in the other sections of this catalog, which are on-line at www.amphenol-aerospace.com). eries I - - onnects eries II - - onnects eries III - - onnects * - - onnects ee mphe-ite (Industrial type) atalog 12-094 elect the quadrax, differential twinax, coax, twinax and/ triax contacts the transition adapters that are needed from the tables on the follow ing pages that crespond to the cable being used. elect the insert arrangement to accommodate required number of contacts. Insert patterns f quadrax and differential twinax contacts are on pages 387,388. Insert patterns f coax, twinax and triax contacts are on pages 404-406. omplete the connect part number from the connect series catalog, incpating the chosen insert pattern number. ee detailed how to der page 389 f dering, eries III with quadrax and differential twinax contacts. onsult mphenol f assistance in dering circulars with coax, twinax and triax contacts. onsult mphenol erospace f dering infmation f connects with tail contacts, and f transition adapters. If connect is dered less contacts, power contacts and/ sealing plugs may be dered separately to fill out the insert arrangement. -, eries II ee section eries II, f complete infmation on this series. hter profile connect series f applica tions requiring maximum space savings ayonet coupling, crimp termination lso available in solder termination types under I--27599 eries II mphe-ite, ype ee atalog 12-094 f complete infmation on this series. ommercial/industrial eries III type ost effective high perfmance connect f severe environments general duty industrial applications onsult mphenol Industrial Operations f further infmation 12-094 catalog is on-line at www. amphenol-industrial.com. O: O: -, ri-tart, eries III igh perfmance capability series f both general duty and severe environment appli cations Offers the widest range of ubminiature am ily il-pec qualified options in contact and connect styles hreaded coupling; completely mates in one turn; crimp termination uperi I/ shielding effectiveness coop-proof design (recessed pins) vailable in aluminum, stainless steel and firewall, lightweight composite styles ee section eries III f complete infmation on this section. 39029 supersedes I--39029. I-- supersedes I--. I--27599 supersedes I--27599 -, eries I ee section eries I, f complete infmation on this series. coop-proof (recessed pins) ayonet coupling, crimp termination lso available in solder termination types under I--27599 eries II -, ype ee the section of this catalog. mphenol proprietary series (non-) which is a further expansion of the basic family, but incpates the scoop-proof design ompliant with several uropean specifications 376 ontact mphenol erospace f me infmation at 800-678-0141 www.amphenol-aerospace.com
Quadrax ontacts, I--, eries III eneral escription mphenol erospace mphenol Quadrax ontacts -offer several advantages f high data transfer rates, low power consumption and excellent I compatibility: our strategically spaced inner contacts fm two 100 150 Ohm matched impedance differential pairs Outer contact has rugged wall section f durability vailable in size 8 crimp termination style lso available in size 8 with tails (see page 379) equires modification of I-- connect to accommodate keyed contacts (4) OO IIO I Quadrax in with 88 45 ack able Illustration - Quadrax ontact YI QX O O has socket outer contact with a socket inner contact YI QX I O has pin outer con tact with a pin inner contact Quadrax in ize 8 and I-- eries III onnect Quadrax in an ight Wire igabit thernet ssembly uggested train elief - Insert rrangements 9-5 19-18 with Quadrax ontacts ue to the piggyback grommet interference with nmal strain reliefs on the shell size 9 only, the recommended strain relief f the connect is: mphenol part number W--5309-10 (O ad) - -5309-10 (lectroless nickel) - shell size 9 only. 19-18 insert pattern, recommended backshell: lenair 367-221-. his is recommended due to the proximity of the size 8 contacts in relation to the shell..367 X..525 X. IY O lso see Quadrax contacts f I 600 and 27 ack and anel onnects on page 411 and 412. Quadrax ontacts are gold plated, crimp termination inish of mating contacts parts: supplied with 0.000050 min. gold over nickel on mating parts. onsult mphenol f availability of other finishes. Quadrax ize 8 ontact erfmance: andwidth: p to 3 igahertz ata ate: xceeding 3 bits/sec. oltage ating: 500 rms max. @ sea level ielectric Withstanding oltage: 1000 rms between all inner contacts @ sea level, 500 rms between inner and outer contacts @ sea level uggested umbering f Quadrax ontacts 4 3 1 2 I O I OIIO Y ifferential airs, contacts 1-3, 2-4. O O I ee page 389 f part number dering of popularly used eries III connects with 100 ohm quadrax contacts. Quadrax differential pairs are 1and 3, 2 and 4. 2 3 1 4 III II I 26482 83723 III 5015 atrix 2 atrix yle rimp ear elease atrix 26500 yle rinted ircuit oard I ilter ransient iber Optics igh peed ontacts ontact mphenol erospace f me infmation at 800-678-0141 www.amphenol-aerospace.com 377
mphenol erospace Quadrax ontacts f I-- eries III, pplication ata igh peed I ilter rinted 5015 83723 III 26482 iber Optics ransient ircuit oard 26500 yle rimp ear ontacts elease atrix atrix yle atrix 2 I II III - eries, I-- eries III* onnects able raka ileca -4703-3, 4704-4, ilotex 2236, ilotex 2870, I Wire 50424 0972, ensolite 23450/04090X-4() ensolite 24Q100, 24Q100-01, 24443/9025X-4(), 280W502-4, 24443/03130X-4(), 24443/20714X-4(), 24450/0120X-4(), 24-2Q100, YO - W-18664, O -01-81869- 01, 24443/03166X-4(), hermax 956-4200, ic Wire 51424, hermax X100Q-24, 24Q100-01-200 (pace) ensolite 22Q100, 22Q100-01, hermax 956-5, O 7688 raka ileca -4704-5, 1503 24 ensolite 26Q100, 26Q100-01, 26-2Q100, I 51426 raka ileca -4704-6, e 8672 ensolite 24Q100-01 (same as 21-3338( ) -51, uses I iggyback) e 8513, Y18-3 ensolite 22Q100 pecial ox pattern, only mates with 21-333 ( )-181 ensolite 24Q100, 24Q100-01 f 2.5 bps applications QX O O I - OO ontact art umber (ermination Instruction heet)** in 21-33384-21 (-2119-) 21-33384-51 (-2119-) 21-33384-61 (-2119-) 21-33384-71 (-2119-) 21-33384-151 (-2119-W) 21-33384-161 (-2119-) 21-33384-171 (-2119-) 21-33384-181 (-2119-) 21-33384-191 (-2119-) ocket 21-33385-21 (-2119-) 21-33385-51 (-2119-) 21-33385-61 (-2119-) 21-33385-71 (-2119-) 21-33385-151 (-2119-W) 21-33385-161 (-2119-) 21-33385-171 (-2119-) 21-33384-181 (-2119-) 21-33385-191 (-2119-) Impedance (Ohms) 100 Inner onduct (W) 24 24 22 26 26 24 22 22 ontact ize 8 lectrical rotocol thernet, 1000 ase- igabit thernet thernet, 1000 ase- igabit thernet thernet (100 bps), 1000 ase- igabit thernet (1 bps) thernet (100 bps), 1000 ase- igabit thernet (1 bps) thernet (100 bps), 1000 ase- igabit thernet (1 bps) thernet (100 bps), 1000 ase- igabit thernet (1 bps) thernet (100 bps), 1000 ase- igabit thernet (1 bps) thernet (100 bps), 1000 ase- igabit thernet (1 bps) erial pplications (2.5 bps) 2 (28433/02171X-4) 21-33384-101 21-33385-101 90 2.0 (480 bps) ensolite 24450/03089X-4() 21-33384-211 21-33385-211 Y02-1, Y18 21-33384-221 21-33385-221 24 I 1394 irewire e 8487, Y18 21-33384-231 21-33385-231 110 24 I 1394 irewire ensolite 24450/03089X-4() ame as 21-3338( )-211 but ox pattern, mates with 21-3338( )-241 only ensolite 26473/02006X-4()/e 8328 (not f new designs, use 21-33450/1 series) OI O X 24 24 I 1394 irewire 21-33384-241 21-33385-241 24 I 1394 irewire 21-33384-31 (-2119-) 21-33385-31 (-2119-) QX O ontacts are inserted by hand. efer to termination instructions listed. ontacts are removed with a removal tool. ecommended tool is I-I-81969/14-06, aniels -264-8. efer to termination instructions listed. inish of mating contact parts: ontact part numbers shown in the chart above are sup plied gold plated per 488 ype II, ode,.000050 min. thick over nickel plate per -QQ--290, lass 2,.000030/.000150 thick. 150 26 rimping ools Inner ontact 22520/2-01 with ositioner 22520/2-37 with aniels ositioner 709 Outer ontact 22520/5-01 with ie et 22520/5-45 (ocation ) O OI: xample number given in chart 21-33384-21 should be dered as 21-033384-021; example number 21-33384-151 should be dered as 21-033384-151. dding Zeros is necessary f mphenol dering process on all contact numbers aniels crimping tools are available from aniels fg. p. 6103 nno ve., Orlando, 32809 * equires modified connect to accommodate keyed contacts. **ermination instructions are packaged with each contact and can be found on-line at: www.amphenol-aerospace.com/serviceinstructions.asp onsult mphenol erospace f current release of this contact instruction sheet if applicable. est repts available f indicated protocols. onsult mphenol erospace. 378 ontact mphenol erospace f me infmation at 800-678-0141 www.amphenol-aerospace.com
Quadrax ontacts, I--, eries III pplication ata mphenol erospace - eries, I-- eries III* onnects able ensolite 26473/02006X-4() ame as 21-33384/5-31 but box pattern (not f new designs, use 21-33450/1 series) ensolite 26473/02006X-4(), e 8328 ensolite 26473/02006X-4(), e 8328 (same as 21-33450/1-1 except box pattern. ates with 21-33450/1-11 only. QX O O I - OO ontact art umber (ermination Instruction heet)** in ocket 21-33384-201 21-33385-201 21-33450-001 (-2119-W) 21-33451-001 (-2119-W) 21-33450-011 21-33451-011 Impedance (Ohms) QX O O I - OO Quadrax ontact art umber Impedance ontacts in ocket (Ohms) (1.035 ength) re-tinned tails 21-33398-21 21-33397-21 100 (.866 ength) 21-33398-31 21-33397-31 100 ight ngle, inner contacts box pattern 21-33425-1 100 (.494 ength) re-tinned tails 21-33398-71 150 (1.194 ength) re-tinned tails 21-33398-101 100 (.859 ength) 21-33398-121 100 (.741 ength) 21-33398-271 100 (1.035 ength) 21-33398-291 21-33397-291 100 (.836 ength) 21-33397-301 150 (1.035 ength) re-tinned tails 21-33398-61 21-33397-61 150 (1.035 ength) mates to 21-33451 series 21-33452-11 150 (1.035 ength) mates to 21-33450 series 21-33453-11 150 (.815 ength) mates to 21-33451 series 21-33452-21 150 (.815 ength) mates to 21-33450 series 21-33453-21 150 (.815 ength) re-tinned tails, mates to 21-33451 series 21-33452-31 150 (.815 ength) re-tinned tails, mates to 21-33450 series 21-33453-31 150.866 ength) mates to 21-33451 series 21-33452-41 150 (.866 ength) mates to 21-33450 series 21-33453-41 150 (.494 ength) mates to 21-33451 series 21-33452-51 150 (.494 ength) mates to 21-33450 series 21-33453-51 150 (.840 ength) re-tinned tails 21-33398-81 150 (.780 ength) re-tinned tails 21-33398-131 150 (.840 ength) re-tinned tails 21-33398-91 100 (.708 ength) 21-33398-111 100 (.605 ength) 21-33398-191 100 (.494 ength) 21-33398-231 100 (.741 ength) 21-33398-241 21-33397-241 100 (.806 ength) 21-33398-281 100 (.940 ength) 21-33398-311 100 (.939 ength) 21-33398-361 100 (.672 ength) 21-33398-371 100 (.914 ength) 21-33398-381 100 (.866 ength) 21-33398-411 100 (.901 ength) 21-33397-341 100 (.871 ength) 21-33397-351 100 (1.169 ength) 21-33397-421 100 150 Inner onduct (W) 26 26 26 ontact ize 8 ontact ize 8 lectrical rotocol ibre-hannel (1, 2, 1/2), 1000 ase-x (1.25 ), I-2 (3.2 ) ibre-hannel (1, 2, 1/2), 1000 ase-x (1.25 ), I-2 (3.2 ) I ealing lugs f use with onnects using Quadrax ontacts - ize 8 avities tandard lastic tandard lastic to be used with tails (shter tail length) etal sealing plug - can be used when mating with contacts on mating half etal sealing plug used with s and mating contact on mating half IY O rommet f use with onnects using Quadrax ontacts rimping ools Inner ontact 22520/2-01 22520/2-37 with aniels ositioner 709 Outer ontact 22520/5-01 with ie et 22520/5-45 (ocation ) O OI: xample number given in chart above 21-33384-201 should be dered as 21-033384- 201; example number given in chart at left 21-33398-21 should be dered as 21-033398-021. dding Zeros is necessary f mphenol dering process on all contact numbers aniels crimping tools are available from aniels fg. p. 6103 nno ve., Orlando, 32809 * equires modified connect to accommodate keyed contacts. **ermination instructions are packaged with each contact and can be found on-line at: www.amphenol-aerospace.com/serviceinstructions.asp onsult mphenol erospace f current release of this contact instruction sheet if applicable. est repts available f indicated protocols. onsult mphenol erospace. art umber 3-4008-59 3-4008-591 21-33899-8Q1 21-33899-8Q2 art umber etallized piggyback grommet 21-33321-23 Indicated length given in chart at left is the distance from the rear of the contact retention shoulder to the tip of the tails. II I O III II I 26482 83723 III 5015 atrix 2 atrix yle rimp ear elease atrix 26500 yle rinted ircuit oard I ilter ransient iber Optics igh peed ontacts ote: it does not indicate stickout length when installed in connect. ontact mphenol erospace f me infmation at 800-678-0141 www.amphenol-aerospace.com 379
mphenol erospace ifferential winax ontacts, I-- eries III, eneral escription igh peed I ilter rinted 5015 83723 III 26482 iber Optics ransient ircuit oard 26500 yle rimp ear ontacts elease atrix atrix yle atrix 2 I II III mphenol ifferential winax ontacts - Offer several advantages f high data transfer rates, low power consumption and excellent I compatibility: wo strategically spaced inner contacts fm two 100 150 Ohm matched impedance differential pairs Outer contact has rugged wall section f durability vailable in size 8 crimp termination style lso available in size 8 with tails (see page 381) equires modification of I-- connect to accommodate keyed contacts (2) OO IIO I able Illustration - ifferential winax ontact ifferential winax ocket ontact ifferential winax in ontact YI II WIX O O has socket outer contact with a socket inner contact YI II WIX I O has pin outer con tact with a pin inner contact ifferential winax ontacts are old plated, rimp ermination inish of mating contacts parts: supplied with 0.000050 min. gold over nickel on mating parts. onsult mphenol f availability of other finishes. ifferential winax ize 8 ontact erfmance: andwidth: p to 3 igahertz ata ate: xceeding 3 bits/sec. oltage ating: 500 rms max. @ sea level ielectric Withstanding oltage: 1000 rms between all inner contacts @ sea level 500 rms between inner and outer contacts @ sea level uggested umbering f ifferential winax ontacts OIIO Y 2 1 1 2 I O I O O I 380 ontact mphenol erospace f me infmation at 800-678-0141 www.amphenol-aerospace.com
ifferential winax ontacts, I-- eries III, pplication ata mphenol erospace - eries, I-- eries III* onnects able ensolite 24463/05099X-8(), hermax X 100-24, ensolite 24463/9025X-2(), hermax 12814, 51284-003 (98 Ohm), 26463/70460X- 2 (98 Ohm), I 10224, ileca 2709-3, 24100-200 (pace), 280W502-1 O -05-827300-00 ensolite 26453/03184X-2(), hermax 956-626Z, O -05-827300-00 23460/05114X-2(), I 1024 aychem 00260024, 17/176-00002 (77 Ohm) Y11-24, ensolite 24463/03220-2(), hermax 956-1200 280W502-6, ensolite 24463/9026X-2() ensolite 26483/03071X-2() ensolite 26483/03071X-2() II WIX O O I - OO ontact art umber (ermination Instruction heet)** in 21-33387-21 (-2119-) 21-33387-51*** (-2119-Y) 21-33387-41 (-2119-) 21-33387-61 (-2119-) 21-33387-71 (-2119-) 21-33387-91 (-2119-) 21-33387-101 (-2119-) 21-33387-31 (-2119-) 21-33456-1 (-2119-X) ocket 21-33388-21 (-2119-) 21-33388-51*** (-2119-Y) 21-33388-41 (-2119-) 21-33388-61 (-2119-) 21-33388-71 (-2119-) 21-33388-91 (-2119-) 21-33388-101 (-2119-) 21-33388-31 (-2119-) 21-33457-1 (-2119-X) Impedance (Ohms) 100 150 ontact ize 8 lectrical rotocol thernet, ibre hannel, 1000 ase-x thernet rimping ools Inner ontact 22520/2-01 22520/2-37 with aniels ositioner 709 Outer ontact 22520/5-01 with ie et 22520/5-45 (ocation ) III II I 26482 83723 III 5015 atrix 2 atrix yle rimp ear elease atrix 26500 yle II WIX O O I - OO Quadrax ontact art umber ontacts in ocket (1.035 ength) 21-33834-1 21-33835-1 (.788 ength) 21-33834-31 21-33835-31 (.494 ength) 21-33834-41 21-33835-41 (.939 ength) 21-33834-51 21-33835-51 (.780 ength) 21-33834-61 21-33835-61 (.871 ength) 21-33834-71 21-33835-71 (.937 ength) 21-33834-81 21-33835-81 (1.035 ength) 21-33834-91 21-33835-91 (.843 ength) 21-33834-101 21-33835-101 (.806 ength) 21-33834-111 21-33835-111 (.908 ength) 21-33834-121 21-33835-121 (.530 ength) 21-33834-131 21-33835-131 (.819 ength) 21-33834-141 21-33835-141 (1.035 ength) 21-33834-21 21-33835-21 (1.035 ength) mates to 21-33458-001 21-33456/57 series 21-33457-001 Impedance (Ohms) II WIX O ontacts are inserted by hand. efer to termination instructions listed. ontacts are removed with a removal tool. ecommended tool is I-I-81969/14-06, aniels -264-8. efer to termination instructions listed. 100 ontact ize inish of mating contact parts: ontact part numbers shown in the chart above are sup plied gold plated per 488 ype II, ode,.000050 min. thick over nickel plate per -QQ--290, lass 2,.000030/.000150 thick. 150 8 O OI: xample number given in chart above 21-33387-21 should be dered as 21-033387-021; example number given in chart left 21-33834-1 should be dered as 21-033834-001. dding Zeros is necessary f mphenol dering process on all contact numbers aniels crimping tools are available from aniels fg. p. 6103 nno ve., Orlando, 32809 * equires modified connect to accommodate keyed contacts. *** Indicated contact is vacuum degassed est repts available f indicated protocols. onsult mphenol erospace. **ermination instructions are packaged with each contact and can be found on-line at: www.amphenol-aerospace.com/serviceinstructions.asp onsult mphenol erospace f current release of this instruction sheet. Indicated length given in chart at left is the distance from the rear of the contact retention shoulder to the tip of the tails. II I O ote: it does not indicate stickout length when installed in connect. rinted ircuit oard I ilter ransient iber Optics igh peed ontacts ontact mphenol erospace f me infmation at 800-678-0141 www.amphenol-aerospace.com 381
igh peed I ilter rinted 5015 83723 III 26482 iber Optics ransient ircuit oard 26500 yle rimp ear ontacts elease atrix atrix yle atrix 2 I II III mphenol erospace mphenol Quadrax ontacts f rinted ircuit oard ttachment- vailable f I-- eries III ircular connects with straight tail termination and with compliant pin termination. hese provide the ideal solution f bringing high speed data transmission to the board..475.376 ompliant Quadrax ontacts and ail Quadrax ontacts f ttachment to oards eneral escription ompliant in Quadrax and ail Quadrax ontacts mphenol Quadrax ontacts f ectangular oard evel onnects - Incpate the same size 8 Quadrax contacts as used in circular connects. ize 8 Quadrax ompliant contacts with hole diameters:.025 ±.002 Quadrax contact.040 ±.003 shell grounding ccommodates backplane.125 inch min. thickness onsult mphenol erospace f availability of additional connect configurations 4 OIIO O OO WI QX 2.200 2.000 8 OIIO O OO WI QX.475.381 3.640.500.720 I--, I III OO WI I O. his arrangement has 8 Quadrax tail contacts. I--, I III OO WI I O. his arrangement has 33 size 22 and 2 Quadrax tail contacts. ompliant in Quadrax oard evel onnect.500.720 3.440 382 ontact mphenol erospace f me infmation at 800-678-0141 www.amphenol-aerospace.com
Quadrax ransition dapters and ifferential winax ransition dapters eneral escription mphenol ransition dapters - re used to facilitate launching of controlled impedance signals to printed circuit boards. mphenol provides transition adapters in both contact types: Quadrax transition adapters, 90 straight receptacles threaded cable to board style ifferential twinax transition adapters, 90 straight receptacles, threaded cable to board style 90 Quadrax eceptacle and lug ransition dapter uggested umbering f ransition dapters with Quadrax ontacts 1 2 4 3 IIO I OIIO Y 90 ifferential winax eceptacle and lug ransition dapter IIO inish of mating contact parts: ontacts are sup plied gold plated per 488 ype II, ode,.000050 min. thick over nickel plate per -QQ--290, lass 2,.000030/.000150 thick. 4 3 90 IIO I 1 2 QX IIO lug 21-33836-31 QX IIO 90 mphenol erospace I OOO O QX IIO art umber eceptacle Impedance (Ohms) lectrical rotocol thernet, gigabit ther 21-33836-41 thernet, gigabit ther 21-33836-51 thernet, gigabit ther 21-33836-61 thernet, gigabit ther 21-33837-101 21-33836-21 21-33837-111 lug 21-33832-81 21-33837-81 (90 degree) 21-33837-91 (90 degree) 100 21-33837-41 (90 degree) 21-33837-51 (straight) thernet, gigabit ther 21-33837-61 (90 degree) 21-33837-141 (90 degree) 1000 ase X, ibre channel 21-33837-21 (90 degree) 1000 ase X, 21-33837-211 (jam nut) 21-33837-31 (straight) 21-33837-71 (90 degree) 150 ibre channel I OOO O II WIX IIO art umber eceptacle Impedance (Ohms) lectrical rotocol 21-33832-21 thernet 21-33833-21 (90 degree) 21-33833-31 (90 degree) thernet 21-33833-151 (90 degree) 21-33832-111 100 21-33833-161 (90 degree) 21-33833-171 (90 degree) 21-33833-91 (90 degree) 21-33833-51 (90 degree) 21-33833-141 (90 degree) 21-33832-91 21-33833-111 (90 degree) 150 21-33833-181 (90 degree) 21-33833-101 (90 degree) onsult mphenol erospace f current release of this adapter. est repts available f indicated protocols; consult mphenol erospace. III II I 26482 83723 III 5015 atrix 2 atrix yle rimp ear elease atrix 26500 yle rinted ircuit oard I ilter ransient iber Optics igh peed ontacts ontact mphenol erospace f me infmation at 800-678-0141 www.amphenol-aerospace.com 383
igh peed I ilter rinted 5015 83723 III 26482 iber Optics ransient ircuit oard 26500 yle rimp ear ontacts elease atrix atrix yle atrix 2 I II III mphenol erospace Quadrax ype dapter/ able ail ength Quadrax lug dapter/ ensolite 24Q100 Quadrax lug dapter/ ensolite 22Q100, 22Q100-01, hermax 956-5 Quadrax lug dapter/ raka ileca -4703-3, -4704-4 Quadrax lug dapter/ 26Q100 Quadrax lug dapter/ exnut with ock Wire oles ensolite 24Q100 Quadrax eceptacle traight dapter in-line jam nut (threaded)/ -10-8273900 Quadrax eceptacle traight dapter in-line (threaded)/ 24Q100 Quadrax eceptacle 90 egree dapter/ ail ength.110 Quadrax eceptacle 90 egree dapter/ ail ength.200 Quadrax eceptacle traight dapter/ ail ength.110 Quadrax eceptacle traight dapter/ pecial ail ength (.200) Quadrax eceptacle 90 degree dapter with cable to board/ 24Q100 Quadrax eceptacle 90 degree dapter with cable to board/ 150324 Quadrax eceptacle traight dapter with cable to board/ 24Q100 ating plugs and receptacles Wired to board Quadrax ransition dapters f ttachment to oards pplication ata 100 O QX IIO O I OO I I O O Illustration of dapter O OI: xample number given in chart 21-33837-81 should be dered as 21-033837-081; example number 21-33837-101 should be dered as 21-033837-101. dding Zeros is necessary f mphenol dering process on all contact numbers. aniels crimping tools are available from aniels fg. p. 6103 nno ve., Orlando, 32809 art umber ating (ermination Instruction heet)** Impedance rimping ools hread (Ohms) lug eceptacle ize Inner ontact Outer ontact 21-33836-31 (-2119-) 21-33836-41 (-2119-W) 21-33836-51 (-2119-Y) 21-33836-61 (-2119-) 21-33836-81 21-33837-81 (-2119-) 21-33837-91 (-2119-) 21-33837-41 21-33837-201 21-33837-51 21-33837-61 21-33837-141 (-2119-) 21-33837-231 21-33837-101 (-2119-) 100.375 100 22520/2-01 22520/2-37 with aniels ositioner 709 22520/2-01 22520/2-37 with aniels ositioner 709 22520/5-01 with ie et 22520/5-45 (ocation ) 22520/5-01 with ie et 22520/5-45 (ocation ) ** ermination instructions are packaged with each contact and can be found on-line at: www.amphenol-aerospace.com/serviceinstructions.asp onsult mphenol erospace f current release of this adapter and instruction sheet if applicable. ee electrical protocols f transition adapters on page 383. 384 ontact mphenol erospace f me infmation at 800-678-0141 www.amphenol-aerospace.com
Quadrax ransition dapters ttachment to oards pplication ata Quadrax ype dapter/ able ail ength Quadrax lug dapter/ ensolite 26473/02006X-4(), e 8328 Quadrax eceptacle 90 egree dapter/ ail ength.110 Quadrax eceptacle traight dapter/ ail ength.110 Quadrax eceptacle traight dapter in-line am ut (threaded) ensolite 26473/02006X-4 (), e 8328 Quadrax eceptacle 90 degree dapter with cable to board/ ensolite 26473/02006X-4 Quadrax eceptacle traight dapter with cable to board/ ensolite 26473/02006X-4 () ating plugs and receptacles Wired to board O OI: xample number given in chart 21-33837-81 should be dered as 21-033837-081; example number 21-33837-101 should be dered as 21-033837-101. dding Zeros is necessary f mphenol dering process on all contact numbers. aniels crimping tools are available from aniels fg. p. 6103 nno ve., Orlando, 32809 150 O QX IIO O I OO I I O O Illustration of dapter mphenol erospace art umber ating (ermination Instruction heet)** Impedance rimping ools hread (Ohms) lug eceptacle ize Inner ontact Outer ontact 21-33836-21 (-2119-) 21-33837-21 21-33837-31 21-33837-211 (-2119-Y) 21-33837-71 (-2119-I) 21-33837- 111 (-2119-) 150.375 150 22520/2-01 22520/2-34 22520/2-01 22520/2-34 22520/5-01 with ie et 22520/5-45 (ocation ) ** ermination instructions are packaged with each contact and can be found on-line at: www.amphenol-aerospace.com/serviceinstructions.asp onsult mphenol erospace f current release of this adapter and instruction sheet if applicable. ee electrical protocols f transition adapters on page 383. III II I 26482 83723 III 5015 atrix 2 atrix yle rimp ear elease atrix 26500 yle rinted ircuit oard I ilter ransient iber Optics igh peed ontacts ontact mphenol erospace f me infmation at 800-678-0141 www.amphenol-aerospace.com 385
mphenol erospace ifferential winax ransition dapters f ttachment to oards - pplication ata igh peed I ilter rinted 5015 83723 III 26482 iber Optics ransient ircuit oard 26500 yle rimp ear ontacts elease atrix atrix yle atrix 2 I II III ifferential winax ype dapter/ able ail ength ifferential winax lug dapter/ 17/176-00002 (77 ohms) ifferential winax lug dapter/ ensolite 24463/9025X-2() 10-646060 ifferential winax eceptacle 90 egree dapter/ ail ength.110 ifferential winax eceptacle traight dapter/ ail ength.110 ifferential winax eceptacle traight dapter/ ail ength.165 ifferential winax lug dapter/ensolite 22120 (120 Ohm) ifferential winax eceptacle 90 degree dapter/ ail ength.283 ifferential winax eceptacle traight dapter/ ail ength.283 ifferential winax eceptacle 90 degree dapter (low profile) with cable to board/ ensolite 24463/9026X-2 ifferential winax eceptacle 90 degree dapter with cable to board/ ensolite 24463/9025X-2 ifferential winax eceptacle 90 degree dapter with cable to board/ensolite 24463/9025X-2 ifferential winax ype dapter/ able ail ength ifferential winax lug dapter/ ensolite 26483/03071X-2 ifferential winax eceptacle 90 egree dapter/ ail ength.110 ifferential winax eceptacle traight dapter/ ail ength.110 ifferential winax eceptacle 90 degree dapter with cable to board/ ensolite 26483/03071X-2 100 O II WIX IIO O I OO I I O O ating plugs and receptacles ating plugs and receptacles Wired to board Illustration of dapter art umber ating (ermination Instruction heet)** Impedance rimping ools hread (Ohms) lug eceptacle ize Inner ontact Outer ontact 21-33832-81 (-2119-) 21-33832-21 (-2119-) 21-33832-111 21-33833-21 21-33833-31 21-33833-151 21-33833-161 21-33833-171 21-33833-91 (-2119-) 21-33833-51 (-2119-) 21-33833-141 (-2119-) 100.3125 100.375 100 / 150 O II WIX IIO O I OO I I O O ating plugs and receptacles Wired to board Illustration of dapter 22520/2-01 with ositioner 22520/2-34 / 22520/2-01 with ositioner 22520/2-34 / 22520/2-01 with ositioner 22520/2-34 22520/5-01 with ie et 22520/5-05 (ocation ) / 22520/5-01 with ie et 22520/5-45 (ocation ) / 22520/5-01 with ie et 22520/5-45 (ocation ) art umber ating (ermination Instruction heet)** Impedance rimping ools hread (Ohms) lug eceptacle ize Inner ontact Outer ontact 21-33832-91 (-2119-) 22520/2-01 with ositioner 22520/2-34 22520/5-01 with ie et 22520/5-45 (ocation ) 150.375 21-33833-111 / / 21-33833-181 / / 21-33833-101 (-2119-) 150 / 22520/2-01 with ositioner 22520/2-34 22520/5-01 with ie et 22520/5-45 (ocation ) O OI: xample number given in chart 21-33832-21 should be dered as 21-033832-021; example number 21-338373-141 should be dered as 21-033833-141. dding Zeros is necessary f mphenol dering process on all contact numbers. ** ermination instructions are packaged with each contact and can be found on-line at: www.amphenol-aerospace.com/serviceinstructions.asp onsult mphenol erospace f current release of this adapter and instruction sheet if applicable. ee electrical protocols f transition adapters on page 383. 386 ontact mphenol erospace f me infmation at 800-678-0141 www.amphenol-aerospace.com
Insert rrangements - I--, eries III Incpating Quadrax & ifferential winax ontacts mphenol erospace his illustrated list ing represents the most readily available patterns incpating quadrax and differential twinax contacts within, eries III connects. If you require other arrangements than what are shown here, consult mphenol f further availability. In most cases, unless otherwise stated, size 8 cavities can be filled with quadrax differential twinax contacts. rrangements can be mixed with any size 8 coax, and/ concentric twinax triax contacts. ront face of pin inserts illustrated III II I 17 1 30 11 6 7 8 10 1 2 9 3 6 4 5 Insert rrangement 9-5 17-2 17-22 17-52 17-60 umber of ontacts 1 38 1 2 2 2 8 2 ontact ize 8 22 8 winax 12 8 8 22 8 rounded eets oeing pecification 26482 83723 III 5015 atrix 2 atrix yle rimp ear elease atrix O f 16 1 W 14 15 2 3 13 4 h g 12 5 11 8 10 7 9 8 Insert rrangement 19-18 19-31 19-21-75 umber of ontacts 14 4 12 1 2 16 1 4 ontact ize 22 8 22 12 8 20 8 8 1 6 7 15 16 18 19 21 22 24 26 32 33 28 29 41 42 46 53 59 60 64 67 68 78 72 74 76 81 82 84 79 25 75 Insert rrangement 21-79 23-6 25-7 umber of ontacts 17 2 6 97 2 ontact ize 22 8 8 22 8 93 85 99 94 26500 yle rinted ircuit oard I ilter ransient iber Optics igh peed ontacts 8 10 12 16 20 22 Quadrax ifferential winax ontact mphenol erospace f me infmation at 800-678-0141 www.amphenol-aerospace.com 387
mphenol erospace Insert rrangements - f I-- Incpating Quadrax & ifferential winax ontacts igh peed I ilter rinted 5015 83723 III 26482 iber Optics ransient ircuit oard 26500 yle rimp ear ontacts elease atrix atrix yle atrix 2 I II III ront face of pin inserts illustrated q p r s W z n m y k h t X u Y v Z a b w c d x e g f Z a Y b 8 7 2 6 3 5 c d q r s e w t p f n v u g k m h Insert rrangement 25-8 25-17 25-20 umber of ontacts 8 36 6 10 13 3 4 ontact ize 8 22 8 20 16 8 12 Insert rrangement 25-46 25-62 umber of ontacts 40 4 2 8 4 ontact ize 20 16 8 16 8 X 1 4 round plane only W O X Y Z 3 4 7 5 W 6 1 2 8 10 12 16 20 22 Quadrax ifferential winax 388 ontact mphenol erospace f me infmation at 800-678-0141 www.amphenol-aerospace.com
ow to Order, eries III ircular With Quadrax 100 Ohm ontacts mphenol erospace mphenol ri-tart, eries III* onnects can be dered with the following popularly used Quadrax contacts: 100 ohm quadrax 21-033385-051 socket contacts 100 ohm quadrax 21-033384-051 pin contacts se the following coded number dering procedure : 1. 2. 3. 4. 5. 6. onnect ype hell ype ervice lass hell ize Insert rrangement ontact ype lternate eying osition 00 QW 21 75 tep 1. elect a onnect ype ri-tart eries onnect with metal shells ack panel mounted receptacle with metal shells ri-tart eries onnect with composite shells ack panel mounted receptacle with composite shells tep 2. elect a hell tyle 00 Wall mount receptacle 02 ox mount receptacle available only with the tails and epoxy backfilled (non-removable) 06 traight plug 07 am nut receptacle tep 3. elect a ervice lass with Quadrax Q Q QW QW Q Q Q Q Q Q lectroless nickel plated aluminum lectroless nickel plated ground plane aluminum Olive drab cadmium plate Olive drab cadmium plated ground plane aluminum ilronze ilronze ground plane rosion resistance stainless steel tainless steel ground plane urmalon plated, ickel- alternative to cadmium roundplane urmalon tep 4. elect a hell ize and Insert rrangement ee insert arrangements available with quadrax contacts on preceding pages. hell ize and Insert rrangements are together in one chart. irst number represents hell ize, second number is the Insert rrangement tep 5. elect ontact ype in contacts ocket contacts tep 6. elect an lternate eying osition ocksmith keying rotation of min keys. ee eries III lternate ositions below not required f nmal position ri-tart lternate ositions plug with a given rotation letter will mate with a receptacle with the same rotation letter. he angles f a given connect are the same whether it contains pins sockets. Inserts are not rotated in conjunction with the master key/keyway. hell ize 9 11, 13, and 15 17 and 19 21, 23, and 25 25, 33, and 37 ey & eyway rrangement Identification etter 105 102 80 35 64 91 95 113 90 53 119 51 80 135 49 66 62 79 80 135 49 66 62 79 80 135 49 66 62 79 dering of connects with any other quadrax contacts differential twinax contacts, please consult mphenol erospace f part numbers. I YWY (front face shown) I YWY (front face shown) 140 132 118 140 155 131 141 156 145 156 146 141 142 170 169 140 145 153 142 170 169 140 145 153 142 170 169 140 145 153 215 248 230 205 234 197 208 182 195 220 176 184 196 200 200 200 180 197 196 200 200 200 180 197 188 188 188 188 188 188 265 320 312 275 304 240 236 292 252 255 298 242 293 310 244 257 280 272 293 310 244 257 280 272 293 310 244 257 280 272 III II I 26482 83723 III 5015 atrix 2 atrix yle rimp ear elease atrix 26500 yle rinted ircuit oard I ilter ransient iber Optics igh peed ontacts * he incpation of quadrax differential twinax contacts requires a modified connect to accommodate keyed contacts. me infmation on ri-tart, I-- eries III connects see the section in this catalog. ontact mphenol erospace f me infmation at 800-678-0141 www.amphenol-aerospace.com 389
mphenol erospace oaxial ontacts f I-- eneral escription igh peed I ilter rinted 5015 83723 III 26482 iber Optics ransient ircuit oard 26500 yle rimp ear ontacts elease atrix atrix yle atrix 2 I II III mphenol oaxial ontacts -Offer several advantages f reliable interconnection and continued perfmance: arge crimping area assures low contact resistance and high tensile strength ack insulat positively captivates inner contact against axial loads ront insulat provides closed entry f socket inner contact ecessed inner contact is protected Outer contact has rugged wall section f durability YI II OX O O has socket outer contact with a pin inner contact I-- -, -, -, - ype, oax ize 12 ocket ssembled ontact I-- -, -, -, - ype, oax ize 16 in nassembled ontact I-- -, -, -, - ype, oax ize 8 in ssembled ontact YI II OX I O has pin outer contact with a socket inner contact acket raid Insulation enter onduct able Illustration - oax ontact oax ontacts are gold plated, crimp termination inish of mating contacts parts: supplied with 0.000050 min. gold over nickel on mating parts. Other finishes are available; consult mphenol f further infmation. oax ize 12 & 16 ontact erfmance: ypical W: 1.5:1 maximum up to 700 z and 500 z respec tively, f properly cabled size 12 and 16 coaxial contacts in the eries I, II and III Insulation esistance: 5,000 megohms minimum @ 25 ielectric Withstanding oltage: ize 12: 1,000 ms @ sea level, 250 ms @ 50,000 ft. ize 16: 800 ms @ sea level, 250 ms @ 50,000 ft. ontact esistance: ee I--39029/27, /28, /75, /76, /77, /78 oax ize 8 ontact erfmance: ypical W when terminated to specified 50 ohm cable: 1.5:1 maximum up to 3 z (excluding 21-33101/2-27) Insulation esistance: 5,000 megohms minimum @ 25 ielectric Withstanding oltage: 1,300 ms @ sea level, 250 ms @ 50,000 ft. ontact esistance: ee I--39029/59, /60 I-- -, -, -, - ype, oax ize 8 ocket nassembled ontact 390 ontact mphenol erospace f me infmation at 800-678-0141 www.amphenol-aerospace.com
oaxial ontacts f I-- pplication ata mphenol erospace - eries, I-- eries II, 39029 (27, 28, 76, 78) able -178/, -196/ aveg 30-00761, 30-02024, 30-02033 ensolite 24713/9551, 26723/ 9551 aveg 61-02051 -174/, -188/, -161/, -187/, -316/, -179/, aveg 8100207, imes (-179) 3248, eledyne 11299-180/, -195/, aychem 95281318 aychem 50225111 aychem 95305314 aychem 95271318 e W1159 OX O O I - OO ontact art umber (ermination Instruction heet)** ontact ize rimping ools Installation ools in ocket Inner ontact rimp errule Insertion emoval 21-33122-564 (39029/76-425) (-2035-) 21-33122-562 (-2035-) 21-33122-561 (-2035-) 21-33122-563 (39029/76-424) (-2035-) 21-33122-546 (39029/28-211) (-2035-) 21-33122-541 (39029/28-409) (-2035-) 21-33122-543 (-2035-) 21-33122-544 (-2035-) 21-33122-545 (-2035-) 21-33122-547 (-2035-X) 21-33121-564 (39029/78-433) (-2035-) 21-33121-562 (-2035-) 21-33121-561 (-2035-) 21-33121-563 (39029/78-432) (-2035-) 21-33121-546 (39029/27-210) (-2035-) 21-33121-541 (39029/27-402) (-2035-) 21-33121-543 (-2035-) 21-33121-544 (-2035-) 21-33121-545 (-2035-) 21-33121-547 (-2035-Y) 16 12 22520/2-01 22520/2-35 with aniels ositioner 532 22520/2-01 22520/2-34 with aniels ositioner 323 22520/4-01 22520/4-02 22520/31-01 22520/31-02 aniels -200 ool 2330 I-- O ll contacts mate with other contacts in this series which have the same inner and outer contact diameters. O OI: xample number given in chart 21-33122-564 should be dered as 21-033122-564. dding Zeros is necessary f mphenol dering process on all contact numbers onsult mphenol erospace f current release of this contact instruction sheet if applicable. O: 39029 supersedes I--39029 **ermination instructions are packaged with each contact and can be found on-line at: www.amphenol-aerospace.com/serviceinstructions.asp xample:,,, mphe-ite xample: ocket 21-33121-564 on -196/ cable will mate with pin 21-33122-563 on -188/ cable which is used in both this and the - series. ocket 21-33123-564 on -196/ cable will mate with pin 21-33122-563 on -188/cable which is used in both this and the - series. inish of mating contact parts: ontact part numbers shown in the chart above are sup plied with 0.000050 min. gold (noop hardness 130-200) over nickel on mating parts. Other finishes are available; consult mphenol. aniels crimping tools are available from: aniels fg. p. 6103 nno ve., Orlando 32809 81969/8-07 81969/14-03 mphenol 11-8674-16 11-8794-16 2749516 27534-16 81969/8-09 81969/14-04 mphenol 11-8674-12 11-8794-12 2749512 27534-12 81969/8-08 81969/14-03 mphenol 11-8675-16 11-8795-16 2749516 27534-16 81969/8-10 81969/14-04 mphenol 11-8675-12 11-8795-12 2749512 27534-12 III II I 26482 83723 III 5015 atrix 2 atrix yle rimp ear elease atrix 26500 yle rinted ircuit oard I ilter ransient iber Optics igh peed ontacts ontact mphenol erospace f me infmation at 800-678-0141 www.amphenol-aerospace.com 391
mphenol erospace oaxial ontacts f I-- pplication ata, cont. igh peed I ilter rinted 5015 83723 III 26482 iber Optics ransient ircuit oard 26500 yle rimp ear ontacts elease atrix atrix yle atrix 2 I II III -, I-- eries I; -, I-- eries III; mphe-ite and - eries, 39029 (28, 59, 60, 75, 76, 77) able -178/, -196/ aveg 30-00761, 30-02024, 30-02033 ensolite 24713/9551, 26723/9551 aveg 61-02051 -174/, -188/, -316/, -161/ -187/, -179/, aveg 8100207, imes (-179) 3248, eledyne 11299-180/, -195/, aychem 95281318 aychem 50225111 aychem 95305314 aychem 95271318 aychem 95271314 e W1159, exans 179- /-om 52869-001 -187/, -179/, -174/, -188/, -316/, -161/ aveg 8100207, imes (-179)3248, eledyne 11299-142/, -223/ OX O O I -, -, -I - OO ontact art umber ontact ize rimping ools Installation ools in ocket Inner ontact rimp errule Insertion emoval 21-33122-564 (39029/76-425) (-2035-) 21-33122-562 (-2035-) 21-33122-561 (-2035-) 21-33122-563 (39029/76-424) (-2035-) 21-33122-546 (39029/28-211) (-2035-) 21-33122-541 (39029/28-409) (-2035-) 21-33122-543 (-2035-) 21-33122-544 (-2035) 21-33122-545 (-2035-) 21-33122-585 (-2035-) 21-33122-547 (-2035-X) 21-33122-589 (-2035-) 21-33102-23 (-1107-) 21-33102-24* (-1107-) 21-33123-564 (39029/77-429) (-2035-21-33123-562 (-2035-) 21-33123-561 (-2035-) 21-33123-563 (39029/77-428) (-2035-) 21-33123-546 (39029/75-416) (-2035-) 21-33123-541 (39029/75-417) (-2035-) 21-33123-543 (-2035-) 21-33123-544 (-2035-) 21-33123-545 (-2035-W) 21-33123-585 (-2035-) 21-33123-547 (-2035-Z) 21-33123-589 (-2035-) 21-33101-23 (-1107-) 21-33101-24* (-1107-) O: 39029 supersedes I--39029 II OO: Italicized letters in parenthesis that follow positioner part num bers indicate applicable die closure. ommercial equivalents with the same die clo sure dimension may be used. OI O X 16 12 8 22520/2-01 22520/2-35 with aniels ositioner 532 22520/2-01 22520/2-34 with aniels ositioner 323 22520/2-01 22520/2-31 solder 22520/4-01 22520/4-02 22520/31-01 22520/31-02 aniels -200 ool 2330 22520/5-01 with die set 22520/5-03 () 22520/5-08 () 22520/5-35 () 22520/10-01 with ie et 22520/10-05 () 22520/5-01 with die set 22520/5-05 () 22520/5-19 () 22520/10-01 with ie et 22520/10-07 () 81969/8-07 81969/14-03 mphenol 11-8674-16 11-8794-16 2749516 27534-16 81969/8-09 81969/14-04 mphenol 11-8674-12 11-8794-12 2749512 27534-12 and inserted 81969/8-08 81969/14-03 mphenol 11-8675-16 11-8795-16 2749516 27534-16 81969/8-10 81969/14-04 mphenol 11-8675-12 11-8795-12 2749512 27534-12 11-9170 O OI: xample number given in chart 21-33122-564 should be dered as 21-033122-564; example number 21-33102-23 should be dered as 21-033102-023. dding Zeros is necessary f mphenol dering process on all contact numbers onsult mphenol erospace f current release of this contact instruction sheet if applicable. When inner contact is installed by crimping only. 11-10134 xpander ool it must be used to assemble rear insulat over contact. **ermination instructions are packaged with each contact and can be found on-line at: www.amphenol-aerospace.com/serviceinstructions.asp 392 ontact mphenol erospace f me infmation at 800-678-0141 www.amphenol-aerospace.com
oaxial ontacts f I-- pplication ata, cont. mphenol erospace -, I-- eries I; -, I-- eries III; mphe-ite and - eries, 39029 (28, 59, 60, 75, 76, 77), cont. able aveg 51-03111, ensolite 28895/2X1-180/, -195/, aychem 95281318-316 ouble hield (17/152-00001) aychem 75245111-9 (triax cable - contact will terminate inner coax ption only) -400, 3058 352001-58 (17/155-00001), 17/028--058 OX O O I -, -, -I - OO, O. ontact art umber (ermination Instruction heet)*** ontact ize rimping ools Installation ools in ocket Inner ontact rimp errule Insertion emoval 21-33102-22 (-1107-) 21-33102-21 (39029/60-367 upersedes 27536) (-1107-) 21-33102-25 (-1107-) 21-33102-26 (-1107-) 21-33102-27 (-1286-) 21-33102-29 (-1107-) 21-33101-22 (-1107-) 21-33101-21 (39029/59-366 upersedes 27535) (-1107-) 21-33101-25 (-1107-) 21-33101-26 (-1107-) 21-33101-27 (-1293-) 21-33101-29 (-1107-Y) 8 22520/2-01 22520/2-31** solder 22520/2-01 22520/2-31 22520/2-01 22520/2-10 older 22520/5-01 with die set 22520/5-05 () 22520/5-41 () 22520/10-01 with ie et 22520/10-07 () 22520/5-01 with ie et 22520/5-37 () 22520/10-01 with ie et 22520/10-15 () 22520/5-01 with ie et 22520/5-45 () 22520/5-01 with ie et 22520/5-05 () and inserted 11-9170 III II I 26482 83723 III 5015 atrix 2 atrix yle rimp ear elease atrix 26500 yle rinted ircuit oard 50211331-0 52869-001 432101 50221311-0 -19X lex-402 21-33102-36 (-1107-) 21-33102-37 (-1107-) 21-33102-39 (-1107-) 21-33652-1 (-2091-) 21-33102-41 (-1107-) 21-33101-36 (-1107-Q) 21-33101-37 (-1107-W) 21-33101-36 (-1107-) 21-033653-1 (-2091-) 21-33101-41 (-1107-) O: 39029 supersedes I--39029 O: ontacts can be dered by part numbers given in chart II OO: Italicized letters in parenthesis that follow positioner part num bers indicate applicable die closure. ommercial equivalents with the same die clo sure dimension may be used. 22520/2-01 22520/2-31 22520/2-01 1106 older 22520/5-01 with ie et 22520/5-05 () 22520/10-01 with ie et 22520/10-07 () 22520/5-01 with ie et Y25 () 22520/5-01 with ie et 22520/5-05 () O OI: xample number given in chart 21-33102-22 should be dered as 21-033102-022; example number 21-33652-1 should be dered as 21-033652-001. dding Zeros is necessary f mphenol dering process on all contact numbers. onsult mphenol erospace f current release of this contact instruction sheet if applicable ** When inner contact is installed by crimping only. 11-10134 xpander ool it must be used to assemble rear insulat over contact. ***ermination instructions are packaged with each contact and can be found on-line at: www.amphenol-aerospace.com/serviceinstructions.asp I ilter ransient iber Optics igh peed ontacts ontact mphenol erospace f me infmation at 800-678-0141 www.amphenol-aerospace.com 393
mphenol erospace atched Impedance oaxial ontacts f I-- igh peed I ilter rinted 5015 83723 III 26482 iber Optics ransient ircuit oard 26500 yle rimp ear ontacts elease atrix atrix yle atrix 2 I II III mphenol atched Impedance ize 12 oaxial ontacts f /icrowave, igh requency and igh erfmance equirements he matched impedance coax contact is available in size 12. It incpates a captivated inner contact which snaps into the outer contact preventing displacement pull back of the inner contact in situations where the cable may be bent. YI I OX O O has socket outer contact with a captivated pin inner contact YI I OX I O has pin outer contact with a captivated socket inner contact esign features and benefits of the atched Impedance: use in 90 degree angle bent cable applications rovides 50 ohm matched impedance resulting in low W and low insertion loss requency range f a mated pair extends to 3 z and beyond, higher than other coaxial contacts previously offered. Ideally suited f high perfmance and I--1760 high band coaxial contact requirements igh erfmance ize 12 oax 50 Ohm matched -, I-- eries I, -, I-- eries II, and -, I-- eries III se with able 316, -lex-405-316, -lex-405 316, ilotex, 124962, 17/152-00001 omment 39029/102/103 -, I-- eries II 39029/102/103 ype in (ermination Instruction heet)*** 21-33651-11 (-2092-) 21-33651-17 (-2092-) 1088W 1104*50 21-33213-42 6422XQ 178, e X 3403 178, e X 3403-316- 6841*50 39029/102/103 ype -, I-- eries II 39029/102/103 ype 21-33651-12 (-2092-) 21-33651-18 (-2092-) 21-33651-22 (-2092-) ocket (ermination Instruction heet)*** 21-33650-11 (-2092-) 21-33729-11 (-2092-) 21-33650-17 (-2092-) 21-33214-42 (-2092-) 21-33650-12 21-33650-18 (-2092-) 21-33729-18 (-2092-) 21-33650-22 (-2092-) emflex W060 39029/102/103 ype 21-33651-25 21-33650-25 emflex W086 (solid inner 39029/102/103 ype 21-33651-26 21-33650-26 conduct) * dd f pin socket O OI: xample number given in chart 21-33651-11 should be dered as 21-033651- 011. dding Zeros is necessary f mphenol dering process on all contact numbers. ***ermination instructions are packaged with each contact and can be found on-line at: www.amphenol-aerospace.com/serviceinstructions.asp atched Impedance oax ontact erfmance: lectrical pecifications: ontact impedance = 50 ohms nominal requency range = 0 3 z Operable at higher frequencies depending on cable selection. onsult mphenol f details. ielectric withstanding voltage (f a mated pair): t sea level = 1000 t 50, 000 ft. = 250 Insulation resistance: 5 gigaohms min. @ 25 W: 1.20 +.04 ( in z) max. up to 3 z Insertion oss:.11 fz d max. nvironmental pecifications: hermal limits: 55 to 200 echanical pecifications: ating: slide-on ounting: confms to 39029/102 & /103 envelope dimensions 394 ontact mphenol erospace f me infmation at 800-678-0141 www.amphenol-aerospace.com
ypical ontact Installation Instructions f oax ontacts mphenol erospace he following is an example of a contact instruction sheet that would be shipped within the package of contacts f a rimp, ize 12 oax on tact f use in ubminiature, connects. he sheet provides detailed instructions f assembling the component parts and f crimping the contact to coaxial cable, along with the recommended cable and tooling to be used. Installation instructions are included within all contacts f connects. installation instructions f other connect series, there are separate documents (not included in packaging of parts) as follows: - 633 f iniature solder types, -613 f iniature types, -660 f iniature types, and -650 f /tandard and eavy uty types. any other instructions needed, consult mphenol. ost installation instructions can be found on-line at www.amphenol-aerospace.com (from home page, go to ervice Instructions and enter contact part number instruction sheet number). III II I 21-33651-11 (I) 21-33650-11 (O) ontact, in and ocket, oaxial, ype - & -, (I-- eries I & III) rimp, ize 12 Installation Instructions ee table on reverse side f coaxial cable recommended and crimp tool infmation.. 1. lide outer crimp ferrule over cable outer jacket as shown. 2. trip cable outer braid as illustrated. nds must be cut cleanly and at right angles to the axial plane of the cable. he cable must not be defmed while making cuts. 3. lare outer braid, then strip cable dielectric as shown.. 1. ssemble inner contact assembly over cable center conduct and cable dielectric until inside be of bushing butts against cable dielectric. 2. able center conduct must be visible through the inspection hole in the inner contact wire well. 3. rimp inner contact wire well using crimp tool listed in table.. 1. arefully slide outer contact assembly over inner contact assembly and under cable outer braid until inner contact butts against insulat shoulder as illustrated. (Inner contact assembly will snap into the locked position when fully assembled inside the outer contact assembly.) 2. ring outer crimp ferrule fward over cable outer braid as illustrated. (ontinue to push the inner contact assembly fully fward while bringing the outer crimp ferrule into position.) 3. rimp outer crimp ferrule using crimp tool listed in table (.156 ax. over ferrule after crimping). rim excess braid ahead of crimp ferrule, if necessary. O IIO IO OO sing insertion tool (part number 81969/8-09 81969/14-04), insert contact assembly into rear connect grommet hole. ontact must be aligned with hole and not inserted at an angle. ush fward until contact is felt to snap into position within insert. emove tool. O O O OO osition removal tool (part number 81969/8-10 81969/14-04) around cable and slide tool down wire until tool tips enter rear grommet and come to a positive stop. old tool tip firmly against positive stop on contact, grip wire and simultaneously remove tool, contact and cable. -2092- October 2001 mphenol art umber 21-33651-11 21-33650-11 escription atched Impedance* ize 12 oax in atched Impedance* ize 12 oax ocket oaxial able ccommodated 316 (17/113-316) 179 (17/094-179) 316 (17/113-316) 179 (17/094-179) 77820 21-33651-11 (I) 21-33650-11 (O) II.135.195.165 OO II OO I O Y (O OW O ) O O Y (I OW O ) I O IO Inner ontact IIO O ools rimp ool etting ositioner (aniels) 992 (aniels) 5 1360 992 (aniels) 4 1360 992 (aniels) 5 1360 992 (aniels) 4 1360.330. O I.165. II I.010 /.030 ool 22520/5-01 II O I O I O O I Outer ontact ositioner 22520/5-03 () 22520/5-35 () O 1 & 2 3 26482 83723 III 5015 atrix 2 atrix yle rimp ear elease atrix 26500 yle rinted ircuit oard I ilter ransient iber Optics igh peed ontacts * atched Impedance applies when contacts are terminated to 316 cable only. ontact mphenol erospace f me infmation at 800-678-0141 www.amphenol-aerospace.com 395
mphenol erospace igh requency ontacts f I-- eries III ircular eneral escription igh peed I ilter rinted 5015 83723 III 26482 iber Optics ransient ircuit oard 26500 yle rimp ear ontacts elease atrix atrix yle atrix 2 I II III mphenol igh requency ontacts mphenol and icrowave (an mphenol company) offer to 40 z high frequency size 8, 12 and 16 coaxial contacts f the eries III housing and standard inserts. hese contacts allow any application to continue to use the connect and be able to expand the use to include the microwave transmission lines. eatures include: uperi electrical perfmance and high frequency capability lindmate advantage and maintance of an accurate phase length when mated an be terminated to a multiple of cable types depending on the application ses standard interfaces based on I--348, and can be installed in any I-- size 8, 12 16 insert nique loat ount technology allows f consistent microwave perfmance while maintaining tight mechanical tolerances I QY O IIIO lectrical (ated pair size 8-405 emi-igid able) Impedance 50 W requency ange - 40 z W 1.05 +.01 (freq. z) Insertion oss 0.03. (freq. z) Insulation esistance (in.) 10,000 W ontact esistance (ax.) enter conduct: 6.0 mw outer conduct: 3.0 mw outer to cable: 0.5 mw ielectric Withstanding oltage 1,000 ona xtinction oltage 250 igh otential oltage 500 eakage - (80-freq. z) aterials and inish ody and leeve tainless steel per -5640 lloy 30300 ype 1 errule rass per 16, lloy 36000 ontact & ock ing eryllium copper per 196 lloy 17300, d04 Insulat per 1710, ype 1, rade 1, lass pring tainless steel per 313 ype 631 ear ody & ontacts old per 488 ype II, ode, lass 1.27; over ickel per -QQ--290 lass 1 (60µ inches); over opper per I--14550 (10µ inches) assivated per -2700, ype 2 igh requency mphenol art umber (ermination Instruction heet) 21-033449-01 (300-17-008) 21-033448-01 (300-17-008) 21-033449-02 (300-89-009) 21-033448-02 (300-89-009) 21-033449-03 (300-89-008) 21-033448-03 (300-89-008) 21-033449-04 (300-89-002) 21-033448-04 (300-89-002) 21-033449-06 21-033448-06 21-033449-07 21-033448-07 21-033449-08 21-033448-08 21-033449-09 21-033448-09 21-033449-10 ubminiature I-- eries III onnect with ize 8 igh requency ontacts I QY OX O O I, I III OO Interface requency use with able Z 40 Z X-405 Z 18 Z X-405 Z 12 Z -400/ -142 Z 18 Z X-402 26.5 Z X-405 26.5 Z X-402 Z- 75 Ohm nvironmental 21-033448-10 emperature ange 65 to +125 rosion (alt pray) I--202, ethod 101, ondition ibration I--202, ethod 204, ondition, 20 s hock I--202, ethod 213, ondition 1, 100 xs hermal hock I--202, ethod 107, ondition, 65 to +125 oisture esistance I--202, ethod 106, ess step 7 arometric ressure (ltitude) I--202, ethod 105, ondition, 70,000 ft. 2 Z -240-75 65 Z X-405 65 Z 0.047 ia. able ype avity ize ocket in ocket in ocket in ocket in ocket in ocket in ocket in ocket in ocket in iggyback rommet 8 21-033321-007 8 21-033321-007 8 21-033321-009 8 21-033321-010 8 21-033321-007 8 21-033321-010 8 21-033321-008 12 / 16 / 396 ontact mphenol erospace f me infmation at 800-678-0141 www.amphenol-aerospace.com
winax ontacts f I-- eneral escription, pplication ata - ize 10 &12 mphenol erospace mphenol winax ontacts -Were designed f use with twinax cable in ata us systems. winax contacts provide the following benefits: rotection from magnetic interference rotection from electrostatic interference including nuclear elec tromagnetic pulse eets parameters defined by I--1553 aintains shield integrity through a multi-pin circular connec t and does not require contact polarization within the insert IZ 10 & 12 OI WIX O he size 12 concentric twinax contact interface was developed f 1104 uroighter contacts, and can be used in any size 12 cavity I, II III connect. eatures: Operating temperature 55 to 175 ins are scoop-proof eets perfmance levels of connect 4 components, gold plated crimp termination use with a variety of cables (ee chart below) YI I O ize 10 & 12 oncentric winax ontacts oltage ating: 500 rms max. @ sea level ontact esistance: enter @ 1 mp, 55 millivolts max. voltage drop @ 25 Intermediate @ 1 mp, 55 millivolts max. voltage drop @ 25 Outer @ 12 mps, 85 millivolts max. voltage drop @ 25 Operating requency: 0 30 z ielectric Withstanding oltage: enter to Intermediate 800 ms @ ea evel Intermediate to Outer 500 ms @ ea evel acket raid Insulation enter onduct able Illustration - winax ontact oncentric winax ontacts ize 12 nassembled omponents of ize 12 oncentric winax ontact III II I 26482 83723 III 5015 atrix 2 atrix yle rimp ear elease atrix 26500 yle rinted ircuit oard use with able 17/176-00002, 51212-002 00240024, ileca 2709-13- 32263,10612, -12-2548-00 0849, 5104-1 95218023002 95218023002 17/176-00002, -12-2549-00 00240024 52022-003 IZ 10 & 12 OI WIX O O I OO oncentric winaxial ontact art umber (ermination Instruction heet)** in 21-33909-25 (-2092-) 21-33909-28 (-2092-) 21-33909-29 (-2092-) 21-33909-81 (-2092-) 21-33909-91 (-2092-) 21-33909-101 (-2092-) 21-33844-1 (-1255-) ocket 21-33908-25 (-2092-) 21-33908-28 (-2092-) 21-33908-29 (-2092-) 21-33908-81 (-2092-) 21-33908-91 (-2092-) 21-33908-101 (-2092-) 21-33640-25 (-2092-W) 21-33640-28 (-2092-) 21-33843-1 (-1255-) ontact ize 12 omments 1104 Interface ame as -91 except new ferrule with wire suppt onnect eries eries I, III 12 1104 Interface eries II 10 upplied with hermal fit sleeve eries I, III O OI: xample number given in chart above 21-33909-25 should be dered as 21-033909-025; example number 21-33843-1 should be dered as 21-033843-001. dding Zeros is necessary f mphenol dering process on all contact numbers. **ermination instructions are packaged with each contact and can be found on-line at: www.amphenol-aerospace.com/serviceinstructions.asp I ilter ransient iber Optics igh peed ontacts ontact mphenol erospace f me infmation at 800-678-0141 www.amphenol-aerospace.com 397
mphenol erospace winax ontacts f I-- eneral escription, pplication ata - ize 8 igh peed I ilter rinted 5015 83723 III 26482 iber Optics ransient ircuit oard 26500 yle rimp ear ontacts elease atrix atrix yle atrix 2 I II III igh perfmance connects within the families are the most commonly used connects f incpation of winax contacts. hese connects offer wide versatility in insert arrangements f not only con centric winax contacts, but also coax, triax,, wire wrap, thermo couples and I filter contacts. Other connects available with concentric winax contacts: Wire Integrated onnects (WI) f ata us ystems. onsult mphenol erospace, idney, Y. I 404, I 600 and 27 eries rectangular connects. upplied by mphenol anada. IZ 8 OI WIX O he size 8 concentric winax contact was developed f use in I- -1553 irbne multiplex data bus applications which require high perfmance interconnect characteristics in multi-pin connects. Ideal f this application need is the high perfmance ri-tart connect with its fully scoop-proof feature of recessed pins. he concentric winax contact is crimp terminable to twisted shielded cable. eatures include: rovides protection from magnetic and electrostatic interfer ence including nuclear electromagnetic pulse aintains shield integrity through a multi-pin circular con nect and does not require contact polarization within the insert 175 rated and meets perfmance levels of I-- eries III connects I--17/176-00002 cable termination old plated full crimp termination contacts qualified to 39029/90 & /91 Integral part of the I--1760 interconnection system lso available in modified but intermateable versions f termi nation to a host of cables (ee chart on next page) YI I O ize 8 oncentric winax ontacts oltage ating: 500 rms max. @ sea level ontact esistance: enter @ 1 mp, 55 millivolts max. voltage drop @ 25 Intermediate @ 1 mp, 55 millivolts max. voltage drop @ 25 Outer @ 12 mps, 75 millivolts max. voltage drop @ 25 Operating requency: 0 20 z ielectric Withstanding oltage: enter to Intermediate: 1000 ms @ ea evel Intermediate to Outer: 500 ms@ ea evel O OI WIX O OIO ht rofile size 8 winax is avail able that can be used with a low profile right angle backshell and can offer increased packaging efficiency. onsult mphenol erospace f further infmation. I-- eries III onnect with winax ontacts and tandard ontacts oncentric winax ontacts ize 8 ht rofile winax vs tandard ength winax ontact 398 ontact mphenol erospace f me infmation at 800-678-0141 www.amphenol-aerospace.com
winax ontacts f I-- eneral escription, pplication ata - ize 8, cont. mphenol erospace use with able 17/176-00002, 5104-2 17/176-00002 17/176-00002 17/176-00002 aychem 10612, 52022-003 aychem 10614, 22189, 77248664, 050771, 87524, 10971 aychem 10613, 711-6421, 23089/ aychem 10613, 711-6421, 23089/ aychem 10613, 711-6421, 23089/ -12-2548-00, 77260664 xon 517417 aychem 10612, 52022-003 aychem 10612, 52022-003 aychem 10614, 77248664 78200111 (20 W) e X2268 17/176-00002 17/176-00002 17/176-00002 e X2702 17/176-00002 280W502-1, ileca 2709-13-, 5930, aychem 10602 00240024, 00240024 280W502-1, ileca 2709-13-, 5930, aychem 10602 00240024, 00240024 280W502-1, ileca 2709-13-, 5930, aychem 10602 00240024, 00240024 00240311, I 10244 00240311, I 1024 00240311, I 1024 17/176-00002 IZ 8 OI WIX O O I OO ize 8 oncentric winaxial ontact art umber (ermination Instruction heet)** in 21-33190-529 (-1253-) 3-4608- (-430) 21-33190 (-1253-) 21-33190-1 (-1253-) 21-33190-26 (-1253-) 21-33190-22 (-1253-) 21-33190-27 (-1253-) 21-33190-29 (-1253-) 21-33190-30 (-1253-) 21-33190-40 (-1253-) 21-33190-81 (-1253-W) 21-33190-261 (-1253-) 21-33190-262 (-1253-) 3-4608- (-494) 3-46708- (-537) 3-4608- (-1001) 3-4608- (-1000) 21-33910-15 (-1005) 21-33617-1 ( -100) 3-4608- (-1002) 21-33190-70 (-1253-) 21-33190-71 (-1253-) 21-33190-72 (-1253-) ocket 21-33191-530 (-1253-) 3-4708- (-430) 21-33191 (-1253-) 21-33191-1 (-1253-) 21-33191-26 21-33191-22 (-1253-) 21-33191-27 (-1253-) 21-33191-29 (-1253-) 21-33191-30 (-1253-) 21-33191-40 (-1253-) 21-33191-81 (-1253-Y) 21-33191-261 21-33190-262 3-4708- (-494) 3-4708- (-537) 3-4708- (-1001) 3-4708- (-1000) 21-33922-15 (-1005) 3-4708- (-1002) -209546-27 21-33191-70 (-1253-) 21-33191-71 (-1253-) 21-33191-72 (-1253-) 21-33190-90 21-33191-90 (-1253-) 21-33190-91 21-33191-91 (-1253-) 21-33190-92 21-33191-92 (-1253-) 21-33190-625 (-1253-) 21-33191-628 (-1253-) omments 39029/90/91 (mphenol) upplied with heat shrink seal 39029/90/91 (yle) upplied with heat shrink seal Without seals upplied with piggyback grommet seal Without seals Without seals upplied with heat shrink seal upplied with piggyback grommet seal Without seals upplied with heat shrink sleeve upplied with piggyback grommet seal upplied with piggyback grommet seal upplied with heat shrink seal Without seals Without seals ht profile upplied with heat shrink seal (.450) ht profile upplied with heat shrink seal (.450) ht profile Without seals (.263) ht profile upplied with piggyback grommet seal (.450) ht profile upplied with heat shrink seal (.450) ht profile Without seals (.303) Without seals upplied with piggyback grommet seal upplied with heat shrink seal Without seals upplied with piggyback grommet seal upplied with heat shrink seal 39029/113-625 & /114-628 upplied with heat shrink seal onnect eries eries I, III III II I 26482 83723 III 5015 atrix 2 atrix yle rimp ear elease atrix 26500 yle rinted ircuit oard I ilter ransient iber Optics igh peed ontacts O OI: xample number given in chart above 21-33190-529 should be dered as 21-033190-529; example number 21-33190-1 should be dered as 21-033190-001. dding Zeros is necessary f mphenol dering process on all contact numbers. **ermination instructions are packaged with each contact and can be found on-line at: www.amphenol-aerospace.com/serviceinstructions.asp onsult mphenol erospace f current release of this contact instruction sheet if applicable. ontact mphenol erospace f me infmation at 800-678-0141 www.amphenol-aerospace.com 399
mphenol erospace riax ontacts f I-- eneral escription, pplication ata igh peed I ilter rinted 5015 83723 III 26482 iber Optics ransient ircuit oard 26500 yle rimp ear ontacts elease atrix atrix yle atrix 2 I II III mphenol riax ontacts -rovide additional shielding when terminated to triax cable having solid stranded center conducts. mphenol supplies triax contacts in sizes 8, 10 and 12 and they are ideally suited f use in eries I, II and III circular connects. eatures and benefits of mphenol triax contacts include: Incpates three conducts, designed f use with triax cable ach of the three conducts are separated by dielectric insulation to isolate ground planes hielding effectiveness is improved with two isolated shields ay be specified f direct connection to printed circuit boards ay be mixed with coax, twinax and power contacts in a single connect acket raid YI I O ize 8, 10 and 12 riax ontacts ontact esistance: enter @ 1 mp, 120 millivolts max. voltage drop @ 25 Intermediate @ 1 mp, 60 millivolts max. voltage drop @ 25 Outer @ 12 mps, 90 millivolts max. voltage drop @ 25 Operating requency: ize 12: 0-30 z ize 10: 0-300 z ize 8: 0-500 z ielectric Withstanding oltage: enter to Intermediate 800 ms @ ea evel Intermediate to Outer 500 ms @ ea evel Insulation esistance: 1000 megohms minimum @ 25 IZ 8, 10 & 12 IX O O I I I & III OO use with able riax ize 8 in ontact riax ize 12 ocket ontact 52397-002, 81264-02, X-179, -179, hamplain 81-00321, ensolite 28883/02060X-1(), 75285314, hermatics 12447, 28883/02060X-1 ize 752866314, 75286314 8 52559-001, 81264-01, ensolite 28598/9063-1, eledyne 13809, heminax 95305214 51323-001, hamplain 81-00700, eledyne 11914/1, imes 6603, ensolite 26895/90334X-1 52397-002 10 1088W (75W), 1088W (50W) 12-03-81497-00 (75W) 12-03-81497-00 (75W) 12 arbour X179, imes icrowave -6151 (-179), xon X-179, 540-1050-000 (75W) 12 10602 (winax) 8 O OI: xample number given in chart 21-33198-3 should be dered as 21-033198-003; example number given in chart 21-33198-10 should be dered as 21-033198-010. dding Zeros is necessary f mphenol dering process on all contact numbers. 8 8 8 ize 8, 10, 12 riax ontact art umber (ermination Instruction heet)** in 21-33198-3 (-1254-) 21-33198-11 (-1254-) 21-33198-4 (-1254-) 21-33198-10 (-1254-) 21-33800-1 (-1256-) 21-33909-12 (-1256-) 21-33909-23 (-1256-) 21-33909-33 (-1256-) 21-33909-71 (-1256-) 21-33724-15 (-1255-) ocket 21-33197-3 (-1254-) 21-33197-11 (-1254-) 21-33197-4 (-1254-) 21-33197-10 (-1254-) 21-33801-1 (-1256-) 21-33908-12 (-1256-) 21-33908-23 (-1256-) 21-33908-33 (-1256-) 21-33908-71 (-1256-) (onsult with mphenol f availability) Insulation omments 1104 Interface eplaced by -33 with improved rear insulat 1104 Interface pecial design with triax mating end and twinax cable termination **ermination instructions are packaged with each contact and can be found on-line at: www.amphenol-aerospace.com/serviceinstructions.asp enter onduct able Illustration - riax ontact 400 ontact mphenol erospace f me infmation at 800-678-0141 www.amphenol-aerospace.com
oax, winax & riax ail ontacts eneral escription, pplication ata mphenol erospace mphenol rinted ircuit ail ontacts are currently supplied as follows: 8, 12 and 16 oax 8, 10 and 12 winax 8 riax (socket only) ail shielded contacts provide a cost effective packag ing solution f limited space applications where connec ts are attached to printed circuit boards. igh reliability is assured with facty pre-assembled contacts and stan dardization termination to the board. ail contacts are available f I-- eries I and III circular connects and also f I 404, I 600 and 27 rect angular connects. he following pages (402 & 403) show the avail able ail contact part numbers f ircular connects. ee page 412 ectangular ection of this catalog f infmation on twinax contacts f I ect angular connects along with compatible cable termina tions. onsult mphenol erospace f further infmation on the applicable tooling f these contacts. YI I O ize 8, 12 & 16 ail oax ontacts ontact esistance: enter @ 1 mp, 55 millivolts max. voltage drop @ 25 Outer @ 1 mp, 55 millivolts max. voltage drop @ 25 Operating requency: 0 500 z ielectric Withstanding oltage: enter to Outer 500 ms @ ea evel Insulation esistance 1,000 megohms minimum @ 25 YI I O ize 8, 10 & 12 ail winax ontacts ontact esistance: enter @ 1 mp, 55 millivolts max. voltage drop @ 25 Intermediate @ 1 mp, 55 millivolts max. voltage drop @ 25 Outer @ 1 mp, 55 millivolts max. voltage drop @ 25 Operating requency: 0 20 z ielectric Withstanding oltage: enter to Intermediate 500 ms @ ea evel Intermediate to Outer 500 ms @ ea evel Insulation esistance 1,000 megohms minimum @ 25 YI I O ize 8 ail riax ontacts ontact esistance: enter @ 1 mp, 55 millivolts max. voltage drop @ 25 Intermediate @ 1 mp, 55 millivolts max. voltage drop @ 25 Outer @ 1 mp, 55 millivolts max. voltage drop @ 25 Operating requency: 0 500 z ielectric Withstanding oltage: enter to Intermediate 500 ms @ ea evel Intermediate to Outer 500 ms @ ea evel Insulation esistance 1,000 megohms minimum @ 25 ail oax and winax ontacts f ttachment to rinted ircuit oards ize 8, ail winax ocket ontact f use in onnects onnect with ail oax ontacts, ealing lugs in unused contact cavities and ail lignment isc III II I 26482 83723 III 5015 atrix 2 atrix yle rimp ear elease atrix 26500 yle rinted ircuit oard I ilter ransient iber Optics igh peed ontacts ontact mphenol erospace f me infmation at 800-678-0141 www.amphenol-aerospace.com 401
mphenol erospace oax, winax & riax ail ontacts pplication ata, cont. igh peed I ilter rinted 5015 83723 III 26482 iber Optics ransient ircuit oard 26500 yle rimp ear ontacts elease atrix atrix yle atrix 2 I II III I OX, WIX, IX O O I I I & III OO ail oax ontact art umber ail winax ontact art umber ail riax ontact art umber ails* omments ize 8 in 21-33733-7 2 tails 8 in 21-33733-2 2 tails epoxy filled connect 8 in 21-33733-4 2 tails epoxy filled connect 8 in 21-33733-5 4 outer tails, 1 inner 8 in 21-33733-9 2 tails 8 in 21-33733-8 2 tails 8 ocket 21-33426-1 2 tails 8 in 21-33967-115 3 tails 8 in 21-33967-125 3 tails 8 in 21-33967-15 3 tails 8 in 21-33967-45 3 tails 8 in 21-33967-55 3 tails 8 in 21-33967-65 3 tails 8 in 21-33967-85 3 tails 8 in 21-33967-95 3 tails 8 in -209550 3 tails 39029/90/91 Interface 8 in -209532-1 9 tails 8 in -209532-2 9 tails 8 ocket 21-33921-15 3 tails 8 ocket 21-33921-45 3 tails 8 ocket 21-33921-35 3 tails 8 ocket 21-33921-65 3 tails 8 ocket 21-33921-75 3 tails 8 ocket 21-33921-115 3 tails 8 ocket 21-33921-105 3 tails 39029/90/91 Interface.040 dia. tails 8 ocket -109002 2 tails 8 ocket 21-33919-15 2 tails 39029/91 Interface Outer body grounded to shell 8 ocket 21-33919-25 2 tails 8 in 21-33828-1 3 tails 8 in 21-33828-21 3 tails 8 in 21-33828-41 3 tails 8 ocket 21-33840-1 3 tails 8 ocket 21-33840-21 2 tails Outer body grounded to shell 8 ocket 21-33841-1 2 tails Outer body grounded to shell 10 in 21-33844-2 2 tails Outer body grounded to shell 12 ocket * onsult mphenol erospace f tail configurations and tail diameters. onsult mphenol erospace f current release of this contact. O OI: xample number given in chart 21-33733-7 should be dered as 21-033733-007; example number given in chart 21-33967-115 should be dered as 21-033967-115; example number given in chart 21-33840-21 should be dered as 21-033840-021. dding Zeros is necessary f mphenol dering process on all contact numbers. 402 ontact mphenol erospace f me infmation at 800-678-0141 www.amphenol-aerospace.com
oax, winax & riax ail ontacts pplication ata, cont. mphenol erospace ize I OX, WIX, IX O O I I I & III OO ail oax ontact art umber ail winax ontact art umber 12 in 21-33686-8 2 tails 12 in 21-33686-9 2 tails 12 in 21-33686-5 2 tails 12 in 21-33686-10 2 tails ail riax ontact art umber ails* omments Outer tail clip type 12 in 21-33686-13 2 tails Outer tail clip type 12 in 21-33687-6 2 tails epoxy filled connect 12 in 21-33687-7 2 tails 12 in 21-33686-16 2 tails 12 ocket 21-33614-1 2 tails 12 ocket 21-33614-21 2 tails 12 ocket 21-33614-41 2 tails 12 ocket 21-33611-3 2 tails Outer tail clip type 12 ocket 21-33440-1 3 tails 12 ocket 21-33430-1 2 tails Outer tail clip type, eries II 12 ocket 21-33430-21 2 tails eries II 12 ocket 21-33430-41 eries II 12 in 21-33633-1 ** 4 tails 12 in 21-33633-2** 4 tails 12 in 21-33633-6** 4 tails 12 in 21-33633-7** 4 tails 12 ocket 21-33393-6** 4 tails 12 ocket 21-33393-5** 4 tails 1104 Interface 12 ocket 21-33433-1** 4 tails eries II, 1104 Interface 16 in 21-33856-15 2 tails 16 in 21-33856-25 90 degree, 2 tails 16 in 21-33856-65 2 tails 16 in 21-33634-15 1 tail Outer body grounded to shell 16 in 21-33634-35 1 tail 16 in 21-33634-45 1 tail 16 in 21-33386-1 2 tails 16 ocket 21-33857-1 2 tails 16 ocket 21-33857-8 2 tails 16 ocket 21-33857-7 2 tails 16 ocket 21-33610-1 2 tails 16 ocket 21-33610-2 2 tails 16 ocket 21-33441-1 2 tails 16 ocket 21-33606-1 2 tails 16 ocket 21-33606-21 2 tails 16 ocket 21-33606-31 2 tails 16 ocket 21-33610-3 2 tails 16 ocket 21-33857-3 2 tails * onsult mphenol erospace f tail configurations and tail diameters. ** ize 12 twinax and triax contacts are intermatable. onsult mphenol erospace f current release of this contact. Outer body grounded to shell eries II O OI: xample number given in chart 21-33633-7 should be dered as 21-033633-007; example number given in chart 21-33686-10 should be dered as 21-033686-010. dding Zeros is necessary f mphenol dering process on all contact numbers. III II I 26482 83723 III 5015 atrix 2 atrix yle rimp ear elease atrix 26500 yle rinted ircuit oard I ilter ransient iber Optics igh peed ontacts ontact mphenol erospace f me infmation at 800-678-0141 www.amphenol-aerospace.com 403
mphenol erospace Insert rrangements - I-- Incpating oax, winax and riax ontacts igh peed I ilter rinted 5015 83723 III 26482 iber Optics ransient ircuit oard 26500 yle rimp ear ontacts elease atrix atrix yle atrix 2 I II III ront face of pin inserts illustrated 1 13 14 2 12 11 15 16 3 22 21 23 17 10 20 24 18 9 19 5 8 6 7 4 Insert rrangement 9-5 10-2 11-2 12-3 13-3 12-4 13-4 14-4 15-4 onnect eries,,, ervice ating rounded I II I I umber of ontact 1 2 3 4 4 ontact ize 8 winax 16 16 16 12 Y Z X W d c b a Z e X Y W Insert rrangement 14-5 15-5 14-15 15-15 14-68 15-68 14-97 15-97 16-6 17-6 vailable in onnect eries,,,,,,,, ervice ating II I I I I umber of ontact 5 14 1 8 8 4 6 ontact ize 16 20 16 16 20 16 12 Insert rrangement 16-8 17-8 16-13 17-13 16-99 17-99 17-2 17-22 16-6 17-6 onnect eries,,,,, ervice ating II I I oax umber of ontact 8 13 21 2 38 1 2 2 ontact ize 16 16 20 16 22 8 12 8 17 d c e b g a f W Z Y X 1 30 11 6 h f W Insert rrangement 17-25 18-11 19-11 18-28 19-28 18-30 19-30 19-31 onnect eries,, ervice ating II I I umber of ontact 22 2 11 26 2 29 1 2 1 12 ontact ize 22 8 16 20 16 20 16 8 12 22 he insert arrangements shown on this page and the next page represent the most readily available patterns within the ircular eries. If you require other arrangements than what are shown here, consult mphenol f further availability. In most cases, unless otherwise stated, size 8 and size 12 cavities can be filled with either coax, twinax, triax power contacts. oax/winax/ riax ower O 8 10 12 16 20 22 winax/riax/ oax ower ower ower ower oax/winax/ riax ower g 404 ontact mphenol erospace f me infmation at 800-678-0141 www.amphenol-aerospace.com
Insert atterns - I-- Incpating oax, winax and riax ontacts mphenol erospace 20 19 40 18 17 16 15 14 13 W j X Y i k Z h r m a g q n b f c d e p 11 12 24 25 1 2 3 21 2223 43 44 26 27 42 52 45 46 28 41 29 51 53 47 39 50 38 37 36 49 35 48 32 33 34 4 5 6 30 31 7 8 9 10 ront face of pin inserts illustrated Insert rrangement 18-68 19-68 18-96 20-11 21-11 20-16 21-16 onnect eries,,,, ervice ating I I I II umber of ontact 18 9 11 16 ontact ize 16 12 12 16 Insert rrangement 20-39 21-39 20-75 21-75 20-79 21-79 22-21 23-21 onnect eries,,,,, ervice ating I II II umber of ontact 37 2 4 17 21 ontact ize 20 16 8 22 16 W Z a Y w v b c X u x d W t y e s z f r g q h p k n m Insert rrangement 23-54 23-97 23-99 24-4 25-4 onnect eries,, ervice ating II II I umber of ontact 40 9 4 16 11 48 8 ontact ize 22 16 12 16 16 20 16 X III II I 26482 83723 III 5015 atrix 2 atrix yle rimp ear elease atrix 26500 yle rinted ircuit oard I ilter ransient iber Optics igh peed ontacts O 8 10 12 16 20 22 oax/winax/ riax ower winax/riax/ ower oax/winax/ riax ower oax ower ower ower ontact mphenol erospace f me infmation at 800-678-0141 www.amphenol-aerospace.com 405
mphenol erospace 406 ontact mphenol erospace f me infmation at 800-678-0141 www.amphenol-aerospace.com 26482 83723 III 5015 26500 yle rinted ircuit oard I ilter ransient iber Optics atrix 2 atrix yle rimp ear elease atrix I II III igh peed ontacts W X Y Z a W X Y Z a b c d e f W X Y Z a b c d e f g h k m n p q r W X Y Z a b c d e f g h k m n p q r s t u v w x W X Y Z a b c d e f g h k m n p q r s t u v w x y z Insert atterns - I-- Incpating oax, winax and riax ontacts W X Y Z 1 2 3 4 5 6 7 Insert rrangement 24-19 25-19 24-20 25-20* 24-24 25-24 onnect eries,,,,, ervice ating I I umber of ontact 19 10 13 3 4 12 12 ontact ize 12 20 16 8 12 16 12 (ocations and Y - edicated to iber Optics) Insert rrangement 24-46 25-46 25-11* onnect eries,, ervice ating I umber of ontact 40 4 2 2 9 ontact ize 20 16 8 20 10 Insert rrangement 24-29 25-29 24-37 25-37 24-43 25-43 onnect eries,,,,,, ervice ating I I I umber of ontact 29 37 23 20 ontact ize 16 16 20 16 O 8 10 12 16 20 22 oax/winax/ riax ower winax/riax/ ower oax/winax/ riax ower oax ower ower ower * use in I--1760 applications with I-- eries III.