STANDARD MICRO-D CONNECTORS
|
|
|
- Samantha Grant
- 9 years ago
- Views:
Transcription
1 STANDARD MICRO-D CONNECTORS RECTANGULAR CONNECTORS Pigtail connector - Metal shell Pigtail connector - Low profile - Metal shell Pigtail connector - Plastic shell Solder cup connector - Metal shell Solder cup connector - Low profile - Metal shell Solder cup connector - Plastic shell PCB RECTANGULAR CONNECTORS PCB overview CBR (Condensed Board Right Angle) type pitch Metal shell CBR (Condensed Board Right Angle) type pitch Plastic shell PCB layout for CBR type CBP (Condensed Board Right Angle) type pitch Low profile - Metal shell CBP (Condensed Board Right Angle) type pitch Low profile - Plastic shell PCB layout for CBP type BR (Board Right Angle) type pitch - Metal shell PCB layout for BR type BS (Board Straight) type pitch - Metal shell BS (Board Straight) type pitch - Plastic shell PCB layout for BS type CBR (Condensed Board Right Angle) type pitch Metal shell PCB layout for CBR type BS (Board Straight) type pitch - Metal shell BS (Board Straight) type pitch - Plastic shell PCB layout for BS type - MIL standard layout PCB layout for BS type - Specific layout CONNECTOR SAVERS One piece design - Metal or plastic shell One piece design - Low profile - Metal shell Back to back assembly - Metal or plastic shell Back to back assembly - Low profile - Metal shell MICROSTRIP CONNECTORS Pigtail & solder cup assemblies PCB connector Microstrip general information PCB layout for microstrip connector pitch CIRCULAR CONNECTORS , AXON CABLE SAS - AXON D-LINE - RELEASED JUNE STANDARD MICRO-D.indd 55 16/12/14 14:40
2 RECTANGULAR CONNECTORS PIGTAIL CONNECTOR IDENTIFICATION CODE METAL SHELL - High performance metal connector and PTFE wire. - Environmentally sealed. - Operating temperature : 150 C or 200 C. - 9 to 100 contacts. MDA 2 51 S 4 L 050 B SERIES MDA : Micro-D AXON standard series. CONNECTOR TYPE 1 : Cadmium aluminium shell + potting 150 C. 2 : Nickel aluminium shell + potting 150 C. 3 : Nickel aluminium shell + potting 200 C. S : Passivated stainless steel shell + potting 200 C. NUMBER OF CONTACTS 09,15,21,25,31,37,51, 51DR, 100. See pages 16&17 for contact arrangements. CONNECTOR GENDER P : Male (pin contacts). S : Female (socket contacts). WIRE TYPE For colour codes F, L, W For colour code V only 1: E 2607, AWG 26, 7 strands, 600V. 3 : M22759/11, AWG26. 4: E 2619, AWG 26, 19 strands, 600V 19 strands, 600V. 6: E 2807, AWG 28, 7 strands, 600V. F : E2607, AWG26, 7 strands, 600V. 8: E 3007, AWG 30, 7 strands, 600V. Solid uninsulated wires A: E 2407, AWG 24, 7 strands, 600V. G : AWG 25 gold plated. C: E 2419, AWG 24, 19 strands, 600V. T : AWG 24 tin plated. E: M22759/33, AWG 26,19 strands, 600V. See page 19 for wire types. COLOUR CODE F : All yellow. BLANK : If wire type is G or T. L : All white. W : 10 colour repeat. V : MIL-STD-681 striped (only for wire types 3 and F). See page 20 for colour code. WIRE LENGTH (cm) Attention! Wire length in centimetres - (1cm = 10mm = ). B : No hardware. C : U-clips with low profile hex skt head jackscrews (removable). D : U-clips with low profile slot head jackscrews (removable). M : Low profile hex skt head jackscrews (removable). N : High profile hex skt head jackscrews (removable). S : Low profile slot head jackscrews (removable). T : High profile slot head jackscrews (removable). P : Jackposts (removable). K : High profile slot head jackscrews (non removable). L : Low profile hex skt head jackscrews (non removable). F : Float mount (non removable). L in cm (inches) TOLERANCE in cm (inches) L 10 L / / < L < L / +3-0 / L > 100 L > / +5-0 / METAL CONNECTORS ARE SUPPLIED WITH ANTI-STATIC PROTECTIVE DUST CAPS 2002, AXON CABLE SAS - AXON D-LINE - RELEASED JUNE STANDARD MICRO-D.indd 56 16/12/14 14:40
3 DIMENSIONS Dimensions are in millimetres (inches). 9 P / 9 S 15 P / 15 S 21 P / 21 S 25 P / 25 S 31 P / 31 S 37 P / 37 S 51DR P / 51DR S 51 P / 51 S 100 P / 100 S A ± 0.25 (±.010) B max. C D E F max /+0.25 ± 0.13 ± 0.25 Male Female (-.018/+.010) (±.005) (±.010) Male Female G max SUMMARY OF CHARACTERISTICS ELECTRICAL & MECHANICAL PERFORMANCE MATERIAL & FINISH CURRENT RATING 3 A max. Aluminium alloy 6061 or 300 series stainless SHELL CONTACT RESISTANCE 8 mω max. steel, see ordering info for plating options INSULATION RESISTANCE 5000 MΩ 500 V DC MOULDED INSULATOR Liquid Crystal Polymer (LCP) DIELECTRIC WITHSTANDING Sea level : 600 V AC INTERFACIAL SEAL Fluorosilicone rubber VOLTAGE Altitude 21 km (70,000 ft) : 150 V AC Copper and beryllium copper, PIN CONTACT CONTACT ENGAGING FORCE 170 g max. (6 oz) gold over nickel plating CONTACT SEPARATING FORCE 14 g min. (0.5 oz) SOCKET CONTACT Copper alloy, gold over nickel plating CONTACT RETENTION 2.26 kg (5 lbs) ENCAPSULANT Epoxy resin DURABILITY 500 mating cycles min. 300 series stainless steel, passivated VIBRATION 20g s No discontinuity > 1 µs SHOCK 50g s No discontinuity > 1 µs SEE PAGE 15 FOR MORE INFORMATION , AXON CABLE SAS - AXON D-LINE - RELEASED JUNE STANDARD MICRO-D.indd 57 16/12/14 14:40
4 RECTANGULAR CONNECTORS PIGTAIL CONNECTOR LOW PROFILE METAL SHELL - High performance metal connector and PTFE wire. - Operating temperature : 150 C or 200 C. - 9 to 51 contacts. IDENTIFICATION CODE MDA 2 L51 S 4 L 050 B SERIES MDA : Micro-D AXON standard series. CONNECTOR TYPE 1 : Cadmium aluminium shell + potting 150 C. 2 : Nickel aluminium shell + potting 150 C. 3 : Nickel aluminium shell + potting 200 C. S : Passivated stainless steel shell + potting 200 C. NUMBER OF CONTACTS L09, L15, L21, L25, L31, L37, L51 See pages 16 & 17 for contact arrangements. CONNECTOR GENDER P : Male (pin contacts). S : Female (socket contacts). WIRE TYPE For colour codes F, L, W For colour code V only 1 : E 2607, AWG 26, 7 strands, 600V. 3 : M22759/11, AWG26. 4 : E 2619, AWG 26, 19 strands, 600V. 19 strands, 600V. 6 : E 2807, AWG 28, 7 strands, 600V. F : E 2607, AWG 26, 7 strands, 600V. 8 : E 3007, AWG 30, 7 strands, 600V. Solid uninsulated wires A : E 2407, AWG 24, 7 strands, 600V. G : AWG 25 gold plated C : E 2419, AWG 24, 19 strands, 600V. T : AWG 24 tin plated E : M22759/33, AWG 26, 19 strands, 600V. See page 19 for wire types. 58 COLOUR CODE F : All yellow. BLANK : If wire type is G or T. L : All white. W : 10 colour repeat. V : MIL-STD-681 striped (only for wire types 3 and F). See page 20 for colour code. WIRE LENGTH (cm) Attention! Wire length in centimetres - (1cm = 10mm = ). L in cm (inches) TOLERANCE in cm (inches) L 10 L / / B : No hardware. C : U-clips with low profile hex skt head jackscrews (removable). D : U-clips with low profile slot head jackscrews (removable). M : Low profile hex skt head jackscrews (removable). N : High profile hex skt head jackscrews (removable). S : Low profile slot head jackscrews (removable). T : High profile slot head jackscrews (removable). P : Jackposts (removable). K : High profile slot head jackscrews (non removable). L : Low profile hex skt head jackscrews (non removable). F : Float mount (non removable). METAL CONNECTORS ARE SUPPLIED WITH ANTI-STATIC PROTECTIVE DUST CAPS 2002, AXON CABLE SAS - AXON D-LINE - RELEASED JUNE < L < L / +3-0 / L >100 L > / +5-0 / STANDARD MICRO-D.indd 58 16/12/14 14:40
5 DIMENSIONS Dimensions are in millimetres (inches). 9 P / 9 S 15 P / 15 S 21 P / 21 S 25 P / 25 S 31 P / 31 S 37 P / 37 S 51 P / 51 S A ± 0.25 (±.010) B max. C D E F max /+0.25 ± 0.13 ± 0.25 Male Female (-.018/+.010) (±.005) (±.010) Male Female G max SUMMARY OF CHARACTERISTICS ELECTRICAL & MECHANICAL PERFORMANCE CURRENT RATING 3 A max. CONTACT RESISTANCE 8 mω max. INSULATION RESISTANCE 5000 MΩ 500 V AC DIELECTRIC WITHSTANDING VOLTAGE Sea level : 600 V AC Altitude 21 km (70,000 ft) : 150 V AC CONTACT ENGAGING FORCE 170 g max. (6 oz) CONTACT SEPARATING FORCE 14 g min. (0,5 oz) CONTACT RETENTION 2,26 kg (5 lbs) DURABILITY 500 mating cycles min. VIBRATION 20g s - No discontinuity > 1µs SHOCK 50g s - No discontinuity > 1µs SHELL MOULDED INSULATOR PIN CONTACT SOCKET CONTACT ENCAPSULENT MATERIAL & FINISH Aluminium alloy 6061 or 300 series stainless steel, see ordering info for plating options Liquid Crystal Polymer (LCP) Copper and berryllium copper, gold over nickel plating Copper alloy, gold over nickel plating Epoxy resin 300 series stainless steel, passivated SEE PAGE 15 FOR MORE INFORMATION , AXON CABLE SAS - AXON D-LINE - RELEASED JUNE STANDARD MICRO-D.indd 59 16/12/14 14:40
6 RECTANGULAR CONNECTORS PIGTAIL CONNECTOR IDENTIFICATION CODE PLASTIC SHELL - Low cost plastic connector. - Operating temperature : 150 C or 200 C. - 9 to 51 contacts. MDA P 51 S 4 L 050 B SERIES MDA : Micro-D AXON standard series. CONNECTOR TYPE P : LCP shell + potting 150 C. L : LCP shell + potting 200 C. NUMBER OF CONTACTS 09,15,21,25,31,37,51. See pages 16&17 for contact arrangements. CONNECTOR GENDER P : Male (pin contacts). S : Female (socket contacts). WIRE TYPE For colour codes F, L, W For colour code V only 1: E 2607, AWG 26, 7 strands, 600V. 3 : M22759/11, AWG26. 4: E 2619, AWG 26, 19 strands, 600V 19 strands, 600V. 6: E 2807, AWG 28, 7 strands, 600V. F : E2607, AWG26, 7 strands, 600V. 8: E 3007, AWG 30, 7 strands, 600V. Solid uninsulated wires A: E 2407, AWG 24, 7 strands, 600V. G : AWG 25 gold plated. C: E 2419, AWG 24, 19 strands, 600V. T : AWG 24 tin plated. E: M22759/33, AWG 26,19 strands, 600V. See page 19 for wire types. COLOUR CODE F : All yellow. BLANK : If wire type is G or T. L : All white. W : 10 colour repeat. V : MIL-STD-681 striped (only for wire types 3 and F). See page 20 for colour code. WIRE LENGTH (cm) Attention! wire length in centimetres - (1cm = 10mm = ). B : No hardware. C : U-clips with low profile hex skt head jackscrews (removable). D : U-clips with low profile slot head jackscrews (removable). M : Low profile hex skt head jackscrews (removable). N : High profile hex skt head jackscrews (removable). S : Low profile slot head jackscrews (removable). T : High profile slot head jackscrews (removable). P : jackposts (removable). K : High profile slot head jackscrews (non removable). L : Low profile hex skt head jackscrews (non removable). F : Float mount (non removable). L in cm (inches) TOLERANCE in cm (inches) L 10 L / / < L < L / +3-0 / L > 100 L > / +5-0 / , AXON CABLE SAS - AXON D-LINE - RELEASED JUNE STANDARD MICRO-D.indd 60 16/12/14 14:40
7 DIMENSIONS Dimensions are in millimetres (inches). A ± 0.25 (±.010) B max. C D E F max /+0.25 ± 0.13 ± 0.25 Male Female (-.018/+.010) (±.005) (±.010) Male Female G max. 9 P / 9 S 15 P / 15 S 21 P / 21 S 25 P / 25 S 31 P / 31 S 37 P / 37 S 51 P / 51 S SUMMARY OF CHARACTERISTICS ELECTRICAL & MECHANICAL PERFORMANCE CURRENT RATING 3 A max. CONTACT RESISTANCE 8 mω max. INSULATION RESISTANCE 5000 MΩ 500 V DC DIELECTRIC WITHSTANDING VOLTAGE MOULDED SHELL MATERIAL & FINISH Liquid Crystal Polymer (LCP) Copper and beryllium copper, gold over nickel plating Sea level : 600 V AC PIN CONTACT Altitude 21 km (70,000 ft) : 150 V AC SOCKET CONTACT Copper Alloy, gold over nickel plating CONTACT ENGAGING FORCE 170 g max. (6 oz) ENCAPSULANT Epoxy resin CONTACT SEPARATING FORCE 14 g min. (0.5 oz) 300 series stainless steel, passivated CONTACT RETENTION 2.26 kg (5 lbs) DURABILITY 500 mating cycles min. VIBRATION 20g s No discontinuity > 1 µs SHOCK 50g s No discontinuity > 1 µs SEE PAGE 15 FOR MORE INFORMATION , AXON CABLE SAS - AXON D-LINE - RELEASED JUNE STANDARD MICRO-D.indd 61 16/12/14 14:40
8 RECTANGULAR CONNECTORS CONNECTOR IDENTIFICATION CODE METAL SHELL - High performance metal connector and solder cup contacts. - Environmentally sealed. - Ideal for prototyping or where pigtail type cannot be used. - Operating temperature : 150 C or 200 C. - 9 to 100 contacts. MDA 2 51 S FS B SERIES MDA : Micro-D AXON standard series. CONNECTOR TYPE 1 : Cadmium aluminium shell + potting 150 C. 2 : Nickel aluminium shell + potting 150 C. 3 : Nickel aluminium shell + potting 200 C. S : Passivated stainless steel shell + potting 200 C. NUMBER OF CONTACTS 09,15,21,25,31,37,51,51DR,100. See pages 16&17 for contact arrangements. CONNECTOR GENDER P : Male (pin contacts). S : Female (socket contacts). B : No hardware. C : U-clips with low profile hex skt head jackscrews (removable). D : U-clips with low profile slot head jackscrews (removable). M : Low profile hex skt head jackscrews (removable). N : High profile hex skt head jackscrews (removable). S : Low profile slot head jackscrews (removable). T : High profile slot head jackscrews (removable). P : Jackposts (removable). K : High profile slot head jackscrews (non removable). L : Low profile hex skt head jackscrews (non removable). F : Float mount (non removable). 62 METAL CONNECTORS ARE SUPPLIED WITH ANTI-STATIC PROTECTIVE DUST CAPS 2002, AXON CABLE SAS - AXON D-LINE - RELEASED JUNE STANDARD MICRO-D.indd 62 16/12/14 14:40
9 DIMENSIONS Dimensions are in millimetres (inches) contacts : Ø2.24/2.44 (.088/.096) 100 contacts : Ø3.68/3.81 (.145/.150) 9-51 contacts : Ø2.24/2.44 (.088/.096) 100 contacts : Ø3.68/3.81 (.145/.150) 9 P / 9 S 15 P / 15 S 21 P / 21 S 25 P / 25 S 31 P / 31 S 37 P / 37 S 51DR P / 51DR S 51 P / 51 S 100 P / 100 S A ± 0.25 (±.010) B max. C D E F max /+0.25 ± 0.13 ± 0.25 Male Female (-.018/+.010) (±.005) (±.010) Male Female G max SUMMARY OF CHARACTERISTICS ELECTRICAL & MECHANICAL PERFORMANCE MATERIAL & FINISH CURRENT RATING 3 A max. Aluminium Alloy 6061 or 300 series stainless SHELL CONTACT RESISTANCE 8 mω max. steel, see ordering info for plating options INSULATION RESISTANCE 5000 MΩ 500 V DC MOULDED INSULATOR Liquid Crystal Polymer (LCP) DIELECTRIC WITHSTANDING Sea level : 600 V AC INTERFACIAL SEAL Fluorosilicone rubber VOLTAGE Altitude 21 km (70,000 ft) : 150 V AC Copper and beryllium copper, PIN CONTACT CONTACT ENGAGING FORCE 170 g max. (6 oz) gold over nickel plating CONTACT SEPARATING FORCE 14 g min. (0.5 oz) SOCKET CONTACT Copper alloy, gold over nickel plating CONTACT RETENTION 2.26 kg (5 lbs) Copper alloy, gold over nickel plating DURABILITY 500 mating cycles min. ENCAPSULANT Epoxy resin VIBRATION 20g s No discontinuity > 1 µs 300 series stainless steel, passivated SHOCK 50g s No discontinuity > 1 µs SEE PAGE 15 FOR MORE INFORMATION , AXON CABLE SAS - AXON D-LINE - RELEASED JUNE STANDARD MICRO-D.indd 63 16/12/14 14:40
10 RECTANGULAR CONNECTORS CONNECTOR IDENTIFICATION CODE LOW PROFILE METAL SHELL - High performance metal connector and solder cup contacts. - Ideal for prototyping or when pigtail type cannot be used. - Operating temperature : 150 C or 200 C. - 9 to 51 contacts. MDA 2 L51 S FS B SERIES MDA : Micro-D AXON standard series. CONNECTOR TYPE 1 : Cadmium aluminium shell + potting 150 C. 2 : Nickel aluminium shell + potting 150 C. 3 : Nickel aluminium shell + potting 200 C. S : Passivated stainless steel shell + potting 200 C. NUMBER OF CONTACTS L09, L15, L21, L25, L31, L37, L51 See pages 16 & 17 for contact arrangements. CONNECTOR GENDER P : Male (pin contacts). S : Female (socket contacts). B : No hardware. C : U-clips with low profi le hex skt head jackscrews (removable). D : U-clips with low profi le slot head jackscrews (removable). M : Low profi le hex skt head jackscrews (removable). N : High profi le hex skt head jackscrews (removable). S : Low profi le slot head jackscrews (removable). T : High profi le slot head jackscrews (removable). P :Jackposts (removable). K : High profi le slot head jackscrews (non removable). L : Low profi le hex skt head jackscrews (non removable). F : Float mount (non removable). 64 METAL CONNECTORS ARE SUPPLIED WITH ANTI-STATIC PROTECTIVE DUST CAPS 2002, AXON CABLE SAS - AXON D-LINE - RELEASED JUNE STANDARD MICRO-D.indd 64 16/12/14 14:40
11 DIMENSIONS Dimensions are in millimetres (inches). 9 P / 9 S 15 P / 15 S 21 P / 21 S 25 P / 25 S 31 P / 31 S 37 P / 37 S 51 P / 51 S A ± 0.25 (±.010) B max. C D E F max /+0.25 ± 0.13 ± 0.25 Male Female (-.018/+.010) (±.005) (±.010) Male Female G max SUMMARY OF CHARACTERISTICS ELECTRICAL & MECHANICAL PERFORMANCE CURRENT RATING 3 A max. CONTACT RESISTANCE 8 mω max. INSULATION RESISTANCE 5000 MΩ 500 V AC DIELECTRIC WITHSTANDING VOLTAGE Sea level : 600 V AC Altitude 21 km (70,000 ft) : 150 V AC CONTACT ENGAGING FORCE 170 g max. (6 oz) CONTACT SEPARATING FORCE 14 g min. (0,5 oz) CONTACT RETENTION 2,26 kg (5 lbs) DURABILITY 500 mating cycles min. VIBRATION 20g s - No discontinuity > 1µs SHOCK 50g s - No discontinuity > 1µs MOULDED SHELL PIN CONTACT SOCKET CONTACT ENCAPSULENT MATERIAL & FINISH Liquid Crystal Polymer (LCP) Copper and berryllium copper, gold over nickel plating Copper alloy, gold over nickel plating Copper alloy, gold over nickel plating Epoxy resin 300 series stainless steel, passivated SEE PAGE 15 FOR MORE INFORMATION , AXON CABLE SAS - AXON D-LINE - RELEASED JUNE STANDARD MICRO-D.indd 65 16/12/14 14:40
12 RECTANGULAR CONNECTORS CONNECTOR PLASTIC SHELL IDENTIFICATION CODE - Low cost plastic connector and solder cup contacts. - Ideal for prototyping or where pigtail type cannot be used. - Operating temperature : 150 C or 200 C. - 9 to 51 contacts. MDA P 51 S FS B SERIES MDA : Micro-D AXON standard series. CONNECTOR TYPE P : LCP shell + potting 150 C. L : LCP shell + potting 200 C. NUMBER OF CONTACTS 09,15,21,25,31,37,51. See pages 16&17 for contact arrangements. CONNECTOR GENDER P : Male (pin contacts). S : Female (socket contacts). B : No hardware. C : U-clips with low profile hex skt head jackscrews (removable). D : U-clips with low profile slot head jackscrews (removable). M : Low profile hex skt head jackscrews (removable). N : High profile hex skt head jackscrews (removable). S : Low profile slot head jackscrews (removable). T : High profile slot head jackscrews (removable). P : Jackposts (removable). K : High profile slot head jackscrews (non removable). L : Low profile hex skt head jackscrews (non removable). F : Float mount (non removable) , AXON CABLE SAS - AXON D-LINE - RELEASED JUNE STANDARD MICRO-D.indd 66 16/12/14 14:40
13 DIMENSIONS Dimensions are in millimetres (inches). Ø2.24/2.44 (.088/.096) Ø2.24/2.44 (.088/.096) A ± 0.25 (±.010) B max. C D E F max /+0.25 ± 0.13 ± 0.25 Male Female (-.018/+.010) (±.005) (±.010) Male Female G max. 9 P / 9 S 15 P / 15 S 21 P / 21 S 25 P / 25 S 31 P / 31 S 37 P / 37 S 51 P / 51 S SUMMARY OF CHARACTERISTICS ELECTRICAL & MECHANICAL PERFORMANCE CURRENT RATING 3 A max. CONTACT RESISTANCE 8 mω max. INSULATION RESISTANCE 5000 MΩ 500 V DC DIELECTRIC WITHSTANDING VOLTAGE MOULDED SHELL MATERIAL & FINISH Liquid Crystal Polymer (LCP) Copper and beryllium copper, gold over nickel plating Sea level : 600 V AC PIN CONTACT Altitude 21 km (70,000 ft) : 150 V AC SOCKET CONTACT Copper alloy, gold over nickel plating CONTACT ENGAGING FORCE 170 g max. (6 oz) Copper alloy, gold over nickel plating CONTACT SEPARATING FORCE 14 g min. (0.5 oz) ENCAPSULANT Epoxy resin CONTACT RETENTION 2.26 kg (5 lbs) 300 series stainless steel, passivated DURABILITY 500 mating cycles min. VIBRATION 20g s No discontinuity > 1 µs SHOCK 50g s No discontinuity > 1 µs SEE PAGE 15 FOR MORE INFORMATION , AXON CABLE SAS - AXON D-LINE - RELEASED JUNE STANDARD MICRO-D.indd 67 16/12/14 14:40
CUSTOM MICRO-D SOLUTIONS
CUSTOM MICRO-D SOLUTIONS CUSTOM DESIGN CONNECTORS Custom design connectors................................ 206 Materials & finishes.................................... 207 69 and 74 way Micro-D connectors........................
SMA Interface Mating Dimensions (Per MIL-STD-348)
SMA Series SMA 6 SMA Interface Mating Dimensions (Per MIL-STD-348) SMA Interface Dimensions MALE Inches/Millimeters 3 Minimum Nominal Maximum LTR in. mm in. mm in. mm A.250 6.35.263 6.68.. B.1790 4.55.1808
ITT Cannon MDM Series MIL-DTL-83513 Micro-D Connectors
APPLICATIONS FEATURES ITT Cannon MDM Series MIL-DTL-83513 Micro-D Connectors Medical Equipment Satellites Robotics Bar Code Scanners HIGH-STRENGTH, LIGHT-WEIGHT ALUMINUM SHELLS These connectors use aircraft/space
MDM. High performance Microminiature connectors, ESA qualified, for space applications.
Microminiature Connectors High performance Microminiature connectors, ESA qualified, for space applications. Suitable for Board-to Board, Board-to Cable or Cable-to Cable applications. Space/High reliability
08. SEK IDC CONNECTORS
. IDC CONNECTORS connectors for flat cables enable simple and, cost-optimized device configuration. connectors are preferably used for connection within the device. HARTING offers a broad range of these
SMA Connectors. RF Coax Connectors. Product Facts
SMA Connectors Product Facts Performance to 12.4 GHz and beyond Available in various base metal options, including stainless steel, brass and zinc diecast Uses industry standard crimp tools and processes
CIN::APSE MICROMINIATURE D-SUB
INTRODUCTION CINCH has been producing filter connectors for years and has acquired an in depth knowledge of EMC protection. CINCH offers fast delivery on a wide range of standard filtered connectors and
COAXICON Contacts. RF Coax Connectors. Product Facts
COXICON Contacts Product Facts Tyco Electronics provides a variety of contacts for coaxial connectors Contacts are available in a range of sizes that may be used with the various types of coaxial cable
Directory chapter 04
M Directory chapter 04 D-Sub Mixed subminiature D connectors New Page D-Sub mixed connector system general information................... 04.02 Contact arrangements............................................
SOURIAU s discrete wire sealing
SOURIAU s discrete wire sealing Description Using proven grommet technology from SOURIAU s extensive knowledge of harsh environments, the UTO & UTS connectors with grommet garantie a discrete wire sealing
Amphenol C 091 A/B/D. Circular Connectors. Amphenol-Tuchel Electronics GmbH
Amphenol C 091 A/B/D Circular Connectors Amphenol-Tuchel Electronics GmbH C 091 A Main Features Metal threaded coupling acc. to IEC. Number of contacts are 2 to 8, 12 and 14. Internal metal strain relief
ISO VIEW OF AX SERIES XLR CABLE CONNECTOR
ISO VIEW OF AX SERIES XLR CABLE CONNECTOR One piece ground / latch spring design incorporating twin wipe contacts for a direct connection path from mating shell to ground providing enhanced connection
Jack to Jack adapters Plug to Plug U-Link connectors PCB Right angle plastic PCB Right angle - metal. Ordering Codes
BNC 75Ω RF CONNECTORS BNC 75Ω RF CONNECTORS To meet the need for higher performance, impedance matched cable interconnections, Amphenol offers a full line of 75 ohm BNC connectors. These connectors can
Directory chapter 02 - DIN Power (to 6 A) Types D, E, F, FM, 2F, F9, interface connectors I/U 02. 01. Technical characteristics types D and E... 02.
Directory chapter 02 - () Types D, E, F, FM, 2F, F9, interface connectors I/U Page Technical characteristics types D and E.............................. 02.10 Type D connectors.................... 02.11
INNOVATION SUPPORTED BY A TRULY SOLID INDUSTRIAL ORGANIZATION.
CONNECTORS 2014 INNOVATION SUPPORTED BY A TRULY SOLID INDUSTRIAL ORGANIZATION. Stelvio Kontek S.p.A. is one of the leading groups in the connectors market. With a solid background in the sector and having
USB3.0 Micro-B Connector
USB3.0 Micro-B Connector ZX360 Series General The ZX360 Series is a Micro-USB connector that is compliant with the MicroUSB 3.0 specifications and supports up to 5Gbps high speed data transmission. As
Index. 2.40 mm Connector Series. 2.40 mm Connectors (50 GHz)... Page. Interface Standards... 44. Specifications... 45. Connector Numbers...
Connector Series Index (50 GHz).... Page Interface Standards... 44 Specifications... 45 Connector Numbers... 46 Typical Test Data... 48 End : can be found in the Adapter section. : can be found in the
Operating Temperature Range: -30 to +85ç (Note 1) Operating Humidity Range: 40 to 80%
All non- products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website search at www.hirose-connectors.com, or contact your Hirose sales representative.
The Wild Children of D38999
micro38999 Series High Vibration Miniature Connectors The Wild Children of D38999 A complete range of space saving compact connectors with all of the features and capabilities of D38999 for harsh applications.
IEC Connectors. Introduction
Introduction IEC Connectors A full range of quality mains rated inlets, outlets and connectors conforming to IEC and EN 60320 specifications carrying UL, CSA, VDE and other approvals. With electrical ratings
CONEC SnapLock. 1 Introduction
CONEC SnapLock E L E C T R O N I C C O N N E C T O R S 1 Introduction The new CONEC SnapLock locking system consists of D-SUB connectors and D-SUB hoods allowing quick and safe locking without any additional
400 Series - Mini USB Buccaneer
IP68 Sealed IP68 rated USB V2.0 performance Plug and play capability Shielded system Overmoulded cables Screw coupling PCB versions Dust and waterproof to EN60529 Data rates up to 480Mbs Hot pluggable,
3M Serial Attached SCSI (SAS) Connector Boardmount Compliant Pin and Surface Mount, Vertical Receptacle
M Serial Attached SCSI (SAS) Connector 6 Gbps input/output connector for backplane applications Two contact mating levels for early-mate and latebreak allows blind mating or hot swap applications Capable
PCb Cable mount twinax. ConneCtorS
PCb Cable mount twinax ConneCtorS technical CharaCteriStiCS SPeCiFiCationS temperature rating: -55 C to + 125 C Corrosion: MIL-STD-202 Method 101, Test Condition B Shock: MIL-STD-202 Method 213, Test Condition
1000 Series Miniature Slide Switches
Miniature Switches Features/Benefits Variety of actuators and terminations Panel mount tabs available Epoxy terminal seal compatible with bottom-wash cleaning RoHS compliant Typical Applications Test &
.093 [2.36] Commercial Pin and Socket Connectors
![.093 [2.36] Commercial Pin and Socket Connectors](/thumbs/40/21560042.jpg ".093 [2.36] Commercial Pin and Socket Connectors")
Product Facts Polarized Cavity identification Low contact-mating force Dual locking lances Detent and positive locking Contacts available in brass and phosphor bronze with tin and gold plating Panel mounting
XG2. Flat Cable Connectors for PCBs. Achieve Total Cost Reduction through High-density Mounting and Reduced Wiring. Terminal Arrangement
Flat Cable Connectors for PCBs XG2 Achieve Total Cost Reduction through High-density Mounting and Reduced Wiring IDC connections allow you to wire all terminals at once without terminating the cable. Can
SC-1000/2000 ROTARY CODED SWITCHES FEATURES PART NUMBER DESIGNATION S C - 1 0 1 0 T B. RoHS compliant
SC-00/2000 RoHS compliant INTERNAL STRUCTURE SC-00 / 2000 series 4 2 3 6 FEATURES BC RoHS compliant Fine click with metallic spring Low profile of 3.9 mm makes perfect for high density board mounting applications
SD Memory Card Connectors
SD Memory Card Connectors DM Series Withstands higher force of card insertion. Card Standard type Metal cover extends over the back of the connector. Features. Withstands higher force of card insertion
Pin/terminal: Wire protect: Screw/torque: Dubilier Connectors. Plan Pin Dia 1.0 Rec-hole Size 1.1. Pin/terminal: Wire protect: Screw/torque:
TERMINA BOCKS mm PITCH VERTICA MOUNT mm Pitch and 3 pole interlocking 4- pole solid, end stackable U94v-0 Flame retardant material.mm wire acceptance U/VDE approved Screw terminal 7.A/380V Dielectric Strength:
AmphenolR. Now you're connected!
Table of Contents CoolPower Overview... Page 3 CoolPower Slim Drawer - DW Series... Page 4 CoolPower D-Sub - LCC17 Series... Page 7 Amphenol Power Solutions... Page 9 Other Amphenol Commercial Products...
400 Series Buccaneer BUCCANEER POWER. bulgin
bulgin BUCCANEER FOR POWER Contact Retainer Sealing Gasket O Ring Contacts Locking Ring Retaining Nut Panel Body Contacts Contact Carrier O Ring Main Body Cable Gland Collet Gland Nut Sealed to IP68 when
6000 Series Buccaneer. 30 twist locking Tamperproof lock prevents accidental un-mating. Cat 5e shielded coupler Maintains shielding
circular connectors that combine the ease of use of a push/pull coupling mechanism with proven environmental sealing. Available with metal or plastic bodies, the range supports both data (USB and Ethernet),
DL AND DBA SERIES CONNECTORS QUALIFIED TO MIL-DTL-83723 SERIES III Weight-saving aluminum connectors designed for rugged use and high temperatures
DEUTSCH DL AND DBA SERIES CONNECTORS QUALIFIED TO MIL-DTL-83723 SERIES III Weight-saving aluminum connectors designed for rugged use and high temperatures DEUTSCH DL AND DBA SERIES CONNECTORS Weight-saving
SMS - Qikmate. Performance characteristics
- Qikmate Qikmate panel and cable connectors Description The versatile Qikmate panel and cable connectors are a highly cost-effective system approach to solving the constant demand for more cost effective
CMD Series. 4 Contact Row High Density Signal Connectors. Technical Characteristics
MD Series 4 ontact Row High Density Signal onnectors Offset-grid layout, four rows within dielectric connector body, mm center-to-center spacing in each row and row-to-row spacing. 0.6 mm nominal pin DI
Two Position Cable-to-Board Power Connector System (Right Angle/Straight) with Coding Contacts
Product Specification 108-19346 17 APR 2013 Rev F Two Position Cable-to-Board Power Connector System (Right Angle/Straight) with Coding Contacts 1. SCOPE 1.1. Content NOTE The product may not perform according
AZ420 MINIATURE GENERAL PURPOSE RELAY
MINIATURE GENERAL PURPOSE RELAY FEATURES Rugged construction for high reliability Life expectancy greater than 0 million operations DC coils to 11 V Power consumption as low as 2 mw per pole available
ANOISON HPQN SERIES HPQN CONNECTORS INTERFACE DIMENSIONS. Description. Interface Dimensions 21 Characteristics
SERIES HPQN CONNECTORS DESCRIPTION CONTENT Designed by James Qu at Anoison in 2006, the HPQN is a quick locking version of the widely used type N connector. By replacing the threaded interface of the original
SMZ type 43 INTRODUCTION. The Radiall Type 43 coaxial connector range. Type 43 series - Features and benefits
INTRODUCTION The Radiall Type 43 coaxial connector range The Radiall range of Type 43 series connectors is fully approved (where applicable) to BT (British Telecom) standards as well as to British Standard
TEST SOLUTIONS CONTACTING - SEMICONDUCTOR
ENGINEERED TO CONNECT CONTACTING - SEMICONDUCTOR TEST SOLUTIONS SPECIFICATIONS AND DRAWINGS ARE SUBJECT TO ALTERATION WITHOUT PRIOR NOTICE - DIMENSIONS IN MILLIMETER CONTACTING - SEMICONDUCTOR 3 SEries
Givare NC-SRS 280 och 880
Givare NC-SRS 280 och 880 Aratron AB/Nordic Control, 02 03 SRS280SEALED ROTARY SENSOR PERFORMANCE ±2 Resistance ±20% Hysteresis (repeatability) Accuracy Applied voltage maximum Resolution Output smoothness
Waterproof Connectors for Outdoor Use
Waterproof Connectors for Outdoor Use HR41A Series Mated condition diagram Nut-tightening rear mount type (panel thickness=mm) 70.5 Features 1. Waterproof connector designed for outdoor use Light-weight
UTS discrete wire sealing
Technical characteristics Mechanical Durability: 250 matings & unmatings Vibration resistance: Sinusoidal vibrations per CEI 605-4 - from 10 to 2000 Hz Thermal shock: 5 cycles 30 min. from -40 C to 105
0.3 mm Contact Pitch, 0.9 mm above the board, Flexible Printed Circuit ZIF Connectors.
0.3 mm Contact Pitch, 0.9 mm above the board, Flexible Printed Circuit ZIF Connectors. FH Series (51pos. type) 3.45mm 17.1mm 0.9mm Features 1. Extremely light weight The largest version, with all contacts
Physical. Electrical. Environmental. Insulation: Contact: Plating: Temperature Rating: -55 C to +85 C
M I/O Interconnect System 2.0 mm for IEEE 194 Wiremount Receptacle (Female) E206 Series Designed to mate to all M I/O Interconnect System 2.0 mm for IEEE 194 Boardmount Plugs Polarized to provide proper
Universal MATE-N-LOK Connectors
Product Facts Pins and sockets can be intermixed in the same housing Positive polarization Rear cavity identification completely enclosed in housings Positive locking housings Insulation capability to.00
Glenair Military and Industrial Power and Signal Connectors
Glenair Military and Industrial Power and Signal Connectors Series ITS (And FRITS) 5015 Type Reverse Bayonet Connectors Derived from MIL-DTL-5015 and VG95234 Mating mechanism (3 reverse bayonets at 120
Catalog C-004 Rev. F
Catalog C-004 Rev. F Experience Founded in 1966 Involvement in the development of international connector specifications through EIA, IEC and ISO as well as PICMG. Introduction of new and unique connector
Technical. Specifications. fischer Rugged Flash Drive. New. Rugged Solution for Safe Data Storage in Harsh Environment
fischer Rugged Flash Drive New Rugged Solution for Safe Data Storage in Harsh Environment Headquarters Fischer Connectors SA Ch. du Glapin 20 1162 Saint-Prex Switzerland Phone +41 21 800 95 95 [email protected]
050-123 BF15U2-2570. REV DESCRIPTION DATE APPROVED 2 Preliminary 1/7/2016 RAS/MF
Copper to Fiber Single Channel Ethernet Media Converter 10/100/1000BASE-T to Single Fiber 1310/1550 Bidirectional Optical Ethernet 28VDC M38999 (Signal), M38999 (Power), M38999 (Fiber Optic) REV DESCRIPTION
ODU MEDI-SNAP. Miniature Circular Connectors with Push-Pull Locking Made of Plastic or Metal. www.odu.de
Miniature Circular Connectors with Push-Pull Locking Made of Plastic or Metal Miniature Circular Connectors with Push-Pull Locking for Medical Applications Applications Medical Test and measure equipment
Trident Connector Family Offers the Versatility and Reliability Required in Industrial & Transportation Applications
Trident Connector Family Offers the Versatility and Reliability Required in Industrial & Transportation Applications Industrial and transportation applications require robust connections with superior
SURFACE MOUNT CERMET TRIMMERS (SINGLE TURN) Rotor. Wiper. Cover. Pin S T - 2 T A 1 0 0 Ω ( 1 0 1 )
SURFACE MOUNT CERMET TRIMMERS (SINGLE TURN) COPAL ELECTRONICS RoHS compliant INTERNAL STRUCTURE 8 4 7! 5! 9 FEATURES RoHS compliant Compact and low-profile mm single turn type Sealed construction 4 5 7
Micro-USB connectors meeting requirements of USB 2.0 Standard
NEW Micro-USB connectors meeting requirements of USB 2.0 Standard ZX Series Note: Contact us to ascertain whether a TID number has been acquired for an individual product. Overview Extremely small high
369 SERIES CONNECTORS
DEUTSCH 369 SERIES CONNECTORS High-Reliability, Lightweight, Compact Connectors Suited To Harsh Aerospace Environments DEUTSCH 369 SERIES CONNECTORS DEUTSCH Lightweight, 369 Series Compact Connectors Connectors
3M Pin Strip Header Single and Dual Row.100,.235 /.318 Mating Length, Straight & Right Angle, Solder Tails 929 Series
M Pin Strip Header Single and Dual Row.100,.25 /.18 Mating Length, &, Solder Tails 929 Series Stackable Gold, Matte Sn, or -Lead plating options High Temperature (PCT) plastic for Wave or IR soldering
Standard Buccaneer - USB
IP68 rated USB version 2.0 performance Plug and play capability Visual mating indication Shielded system Single and double ended cables Screw coupling PCB versions Dust and waterproof sealing when mated
Sealed Industrial Ethernet Circular IP67 Cat. 5e RJ45 Connector System
Revised Sept--22-2009 Sealed Industrial Ethernet Circular IP67 Cat. 5e RJ45 Connector System Description The sealed circular RJ45 connector system is designed for use in harsh environments. The connector
HARTING Ethernet Cabling 8-poles Overview
Ethernet Cabling 8-poles Overview RJ45 Connectors [on page 8] System cables [on page 12] Distribution modules and Outlets [on page 17] Connectors [on page 20] System cables [on page 26] Panel feed-throughs
RJF TV Ethernet connection system for harsh environment
RJF TV Ethernet connection system for harsh environment ROHS compliant N & BZ RJFTV allows you to use an Ethernet Class D / Cat. 5e connection for 10 BaseT, 100 BaseTx or 1000 BaseT networks in harsh environments.
FOR BOARD-TO-CABLE CONNECTION
FOR OARD-TO-ALE ONNETION 230 SERIES (FOR FLAT ALE ONNETION) FEATURES Two 1.27 mm (0.050 in.) pitch flat cables can be used. 1.27 mm (0.05 in.) pitch contact arrangement in two rows and terminal arrangement
Selector Switch Type 08
Compact and versatile 2 positions multi wafer selector switch For PCB mounting 25,000 switching cycles with up to 9.0 Ncm switching torque Gold plated contacts: micron Robust metal housing with metal shaft
Cannon, VEAM, BIW. A Historical Achievement of Technology Leadership. Defining and Championing Innovation
Cannon, VEAM, BIW A Historical Achievement of Technology Leadership Defining and Championing Innovation Showcasing a portfolio of creativity, ITT s Engineered For Life execution embraces products which
Trapezoidal-Connectors Series TMC
Trapezoidal-Connectors Series TMC Subminiature-D Connectors to DIN 41 652/IEC 807-3 General Series TMC connectors are available in 5 different housing sizes with 9, 15, 25, 37 and 50 pins. In applications
Standard Buccaneer - Ethernet
IP6 rated compliant PUR jacket on cable Shielded system shielded coupler Shroud on RJ45 Screw coupling Rewireable flex connector PCB mounted panel connector IDC termination panel connector Earth lead version
Micro-USB connectors meeting requirements of USB 2.0 Standard
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
Ultra Small Surface Mount Coaxial Connectors - 1.9mm or 2.4mm Mated Height
All non- products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website search at www.hirose-connectors.com, or contact your Hirose sales representative.
ONE OF THE SMALLEST SNAP-ACTION SWITCHES IN THE WORLD. FEATURES Superminiature type, light-weight snap action switch PC board terminal type (0.
ONE OF THE SMALLEST SNAP-ACTION SWITCHES IN THE WORLD SWITCHES FEATURES Superminiature type, light-weight snap action switch PC board terminal type (0.2g) Solder terminal type with mounting holes (0.3g)
HARTING Ethernet Cabling 4-poles Overview
Ethernet Cabling 4-poles Overview RJ45 Connectors [on page 8] System cables [on page 10] Distribution modules and Outlets [on page 20] Connectors [on page 22] System cables [on page 24] Panel feed-throughs
Fakra. Coaxial connectors. DC 6 GHz
C-Blue D-Bordeaux GPS application GSM/Mobil Phone The FAKRA (Automobile Expert Group) has therefore defined a standardised connector system for the various communication applications in cars. Our FAKRA-compliant
Outdoor Use Waterproof I/O Connectors (Optical / Modular / Electrical) FO-BH, FO-BC, NT5, JN2 / W Series
COMPONENTS PRODUCT INFORMATION RoHS Compliant NEW Outdoor Use Waterproof I/O Connectors (Optical / Modular / Electrical) FO-BH, FO-BC, NT5, JN2 / W Series Optical FO-BH Series (Compact Type) CONNECTOR
S-Level and Hi-Rel Connectors... 94. Power Rating for Coaxial Connectors... 98. Mounting Guidelines For Flange Mount Connectors...
Index... Page S-Level and Hi-Rel... 94 Power Rating for Coaxial... 98 Mounting Guidelines For Flange Mount... 102 Mating Microwave... 105 RF Versus Microwave SMA... 106 EMI/RFI Shielding Standards... 108
SMA Series Subminiature RF Connectors
SMA Series Subminiature RF Connectors Screw-on mating Frequency range DC-18 GHz High performance Rugged construction ONLINE CATALOG 104 John W. Murphy Drive P.O. Box 510 New Haven, CT 06513 www.aepconnectors.com
How to Order : Power Connector
How to Order : Power Connector Power Connector 89 90 XXX - XX X X X X - X X X XXX SPECIFICATIONS No. Specifications Standard Value Style A For Cable with S/R B For Cable without S/R P For Panel Front Mounting
CIN::APSE COMPRESSION TECHNOLOGY GET CONNECTED...
CIN::APSE COMPRESSION TECHNOLOGY E N A B L I N G T E C H N O L O G Y F O R T H E M O S T D E M A N D I N G I N T E R C O N N E C T A P P L I C AT I O N S GET CONNECTED... CIN::APSE It takes more than an
14 PHOENIX CONTACT Courtesy of Power/mation. 1310 Energy Lane, Saint Paul, MN 55108. [email protected] - 800-843-9859 - www.powermation.
14 PHOENIX CONTACT PLUSCON circular is a circular connector for use in industrial automation. The range of design sizes available is varied, starting with the design sizes M5 to M8 and M1, for sensor/actuator
7000 Series Buccaneer
The all plastic and metal construction of the - circular that combine the ease of use of a quick coupling mechanism with proven environmental sealing for signal and mains power. Designed and independently
AMP. 5.0 mm Power Key Connectors (5.0 PKC) (Wire-to-Board) Soft Shell Pin and Socket Connectors. Product Facts. Standard Density
5.0 mm Power Key Connectors (5.0 PKC) (Wire-to-Board) Product Facts Compact design with 19.4 mm mated height Power circuit connector with 5.0 mm contact centerline Wire-to-board connectors consisting of
DSD 70 Dual Channel Hall Effect Speed Sensor for Railway Applications, compliant with EN 50155
DSD 70 Dual Channel Hall Effect Speed Sensor for Railway Applications, compliant with EN 50155 Technical information Version: 07.14 General Function The speed sensors family DSD.70 are suitable for generating
This product can be assembled to the baseplate maintaining 5 mm center-to-center spacing. Thus any number of poles can end-to-end stack.
page 1/5 Plug-in Screw Connector System for Printed Circuit Boards 950-NLFL-DS 5.00 mm (0.197 in) Spacing - 2-12 poles PICTURES 950-NLFL-DS 950-NLFL & 971-SLK TECHNICAL INFORMATION Description This two
01. HARTING RJ INDUSTRIAL RJ45 ETHERNET CONNECTORS
. HARTING RJ INDUSTRIAL ETHERNET CONNECTORS Ethernet is is coming up to standard industrial interface. Therefore, automation devices such as controllers, sensors and actuators feature possess on one or
Mini USB and USB 2.0-IP67 Connector System
Mini USB and USB 2.0-IP67 Connector System Section 12 Mini USB and USB 2.0-IP67 Connector System CONEC has added the Mini-USB connector. This Mini-USB IP67 receptacle and plug family, feature a bayonet
Size 20 Contacts Solder and Crimp Removable. Military Quality and Severe Industrial Environmental Applications. Environmental-D Series
Environmental-D MILITRY QULITY, REMOVLE CONTCT, SUMINITURE-D CONNECTORS FOR MILITRY ND SEVERE INDUSTRIL ENVIRONMENTL PPLICTIONS Size 20 Contacts Solder and Crimp Removable Military Quality and Severe Industrial
D2SW-P. Sealed Subminiature Basic Switch. Ordering Information
Sealed Subminiature Basic Switch Sealed Basic Switch with Simplified Construction, Mounting Compatible with SS and D2SW Series. Sealing by using rubber packing means the switch can be used in dust-proof
0.2 mm Pitch, 0.9 mm above the board, Flexible Printed Circuit ZIF Connectors
0.9 0.2 mm Pitch, 0.9 mm above the board, Flexible Printed Circuit ZIF Connectors FH43B Series Space saving 17.8mm(81 pos. shown) 2.77 Can be mounted over conductive traces. Features 1. Low-profile, small
Magnetic and Hydraulic-Magnetic Circuit Breaker 8340-G2...
Magnetic and Hydraulic-Magnetic Circuit Breaker 840-G2... Description Single, two and three pole magnetic circuit breakers with trip-free mechanism and push/pull on/off manual actuation. A choice of fast
Product Specification Micro-SIM H1.24 Push-Pull Type 108. This specification covers the requirements for product performance, test methods and quality
Product Specification Micro-SIM H1.24 Push-Pull Type 108 09. Jan 13 1. Scope : 1.1 Contents This specification covers the requirements for product performance, test methods and quality assurance provisions
CCM05 SD, MMC & minisd
For one of the most common card formats, we offer various reading options in a small and sturdy packaging. This includes the smaller standard of the minisd, designed for the mobile communication needs.
Technical Specifications
Technical Specifications Series Fischer Connectors S SaintPrex, Switzerland Phone +41 21 800 95 95 Fax +41 21 800 39 24 www.fischerconnectors.com [email protected] Multipole Product range covered:
MICROCABLES. A complete vision of your connectivity needs. Catalogue
MICROCABLES A complete vision of your connectivity needs Catalogue ELECTRONIC Filotex Introduction Application Nexans s line of microcables is designed towards the increasing requirements of electronics
T-SERIES INDUSTRIAL INCLINOMETER ANALOG INTERFACE
T-SERIES INDUSTRIAL INCLINOMETER ANALOG INTERFACE T-Series industrial inclinometers are compact high performance sensors used to determine inclination in roll and pitch axes with excellent precision and
Times Microwave Systems Hermetically Sealed Assemblies
SCOPE This Specification details the Electrical, Mechanical and Environmental Characteristics of Times Microwave Systems MILTECH 340.34 Diameter Hermetically Sealed Coaxial Transmission Lines. This product
www.axon-cable.com High speed links
www.axon-cable.com High speed links HIGH SPEED High speed links High speed links HIGH SPEED...E-4 SpaceWire links...e-4 28AWG SpaceWire cable...e-5 26AWG SpaceWire cable...e-6 IEEE 1394 links...e-8 LOW
PC/104, PC/104 -Plus, VarPol connectors
164 PC/104, PC/104 -Plus, VarPol connectors Definitions 166 Technical specifications 168 Hole specifications 169 PC/104 170 PC/104-Plus 172 Accessories: PC/104 and PC/104-Plus 174 VarPol angled pin header
3M Pin Strip Header.100,.295 Mating Length, Straight & Right Angle, Solder Tails 929 Series
M Pin Strip Header.100,.295 Mating Length, Straight & Right Angle, Solder Tails 929 Series Stackable Tin Lead or gold plating available Solder stand-offs facilitate production wave soldering Board pin
3M Mini D Ribbon (MDR) Connectors.050 Surface Mount Right Angle Receptacle - Shielded 102 Series
M Mini D Ribbon (MDR) Connectors.050 Surface Mount Right Angle Receptacle - Shielded 102 Series Wiper-on-wiper contact for reliable repetitive plugging Ultra-low signal skew for high data rate transmission
AC SERIES-C TYPE DUAL CONNECTORS JACK/XLR
AC SERIES-C TYPE DUAL CONNECTORS JACK/XLR The AC Series C type chassis receptacles feature two connectors in the one space saving housing. A combined XLR female receptacle together with a 6.35mm (1/4 )
CABLE SPECIFICATION CAN CAB RJ45-SUBD9
CABLE SPECIFICATION All technical information contained in this document is the exclusive property of STI and may neither be used nor disclosed without its prior written consent. AAV 33801 1/8 Connector