CMD Series. 4 Contact Row High Density Signal Connectors. Technical Characteristics
|
|
|
- Cecilia Hunter
- 7 years ago
- Views:
Transcription
1 MD Series 4 ontact Row High Density Signal onnectors Offset-grid layout, four rows within dielectric connector body, mm center-to-center spacing in each row and row-to-row spacing. 0.6 mm nominal pin DI size; 42 to 316 ; dip solder and SMT soldering termination types. High density, low connector weight, low mating force. High shock and vibration proof (no micro interruptions - test: 2ns). onforms to MIL-DTL general requirements, and TPR SD conforms to ES specification. For ivil, Military, erospace and Space applications. Technical haracteristics ontact umber ontact Diameter urrent Rating ontact Resistance Engagement/ Withdrawal Forces ontact Life ycle Dielectric Withstanding Voltage Temperature Range Insulation Resistance Insulator ontact - Material - Plating Hardware Plating Reference 42, 82, 110, 126, 158, 174, 220, 236, mm nominal pin DI mω maximum individual 0.6 nominal per insertion and withdrawal cycles 750 VRMS, 60 Hz - sea level -65 to +125 >5x10 3 MΩ at 500 V dc - thermoplastic according to MIL-M Type GST 40 F; V-0/5V per UL 94 - ES S 3401 Outgassing requirements compliance rass & eu Gold Plate stainless steel passivated or beryllium-copper alloy nickel plated according to MIL-DTL requirements 153
2 MD Series Ordering Information M D * * * * * * * * * * * S D * * * * * * * * * onnector family onforming to MIL-STD In agreement with ES-S-3401 ontact arrangement: four rows onnector size M S ontact finishing (4) Plating standard + tin dipping Plating standard Plating conforming to MIL-DTL tin dipping Plating confoming to MIL-DTL TS T HS H onnector and style Plug Male Receptacle Female ontact terminal style (1) Right angle L 2.76mm Right angle L 3.55mm Right angle L 4.37mm Wire Wrapp L 15.87mm Straight through L 2.76mm Straight through L 3.55mm Straight through L 4.37mm Straight through L 5.94mm Flex-circuit (pcb ) Flex-circuit (pcb ) Flex-circuit (pcb ) Flex-circuit (pcb ) PM EF Y D E G L R T V Hardware polarization Guide type Y (pos.1 without Loctite) (3) Guide type Y Guide type P Guide type K Guide (type Y-P-K) shipped loose Hardware code D-shape Universal coupling (for test type connector) Screw locking (2) (1) Flex circuit terminal style is not avaiable for SD family connector (2) Hardware code type K for connector with flex circuit is not avaiable (3) This polarization is avaiable only for plug and receptacle connector with flex circuit and plug connector with right angle terminal style (4) For SD family don t specify finishing Y P K OTT POSITIO OETOR STYLE OTT TERMIL TYPES VILLE RE: (STRIGHT THRU) DIP SOLDER (RIGHT GLE) SURFE MOUT TIL WIRE WRP POST 42 Plug connector pin s equipped Receptacle connector socket s equipped heck Firm heck Firm o 82 Plug connector pin s equipped Receptacle connector socket s equipped heck Firm heck Firm o 110 Plug connector pin s equipped Receptacle connector socket s equipped heck Firm o 126 Plug connector pin s equipped Receptacle connector socket s equipped heck Firm heck Firm o 158 Plug connector pin s equipped Receptacle connector socket s equipped o 174 Plug connector pin s equipped Receptacle connector socket s equipped o 220 Plug connector pin s equipped Receptacle connector socket s equipped heck Firm heck Firm heck Firm o 236 Plug connector pin s equipped Receptacle connector socket s equipped heck Firm o 316 Plug connector pin s equipped Receptacle connector socket s equipped heck Firm o 154
3 MD Series Plug connector 42 to 174 ways, dip solder, right angle, termination style LST OTT POSITIO OTT POSITIO 1 OTT POSITIO Ø 2.70 THRU PLES MD***PM****H ****** max D-SHPED GUIDE PIS L2.76 L3.55 L ±0.10 M1.6 THREDED SREW L 0.48 DI SEE DETIL x3 DETIL M1.6 THREDED UT SETIO - SETIO - Plug connector: 42,82,110,126,158,174, pin, mm spacing, dip solder (right angle) termination style. OMPOET SIDE Ø 0.70 min Ø 0.05 LST HOLE POSITIO x3 2 1 Mounting pattern, daughterboard application, (recommended P hole configuration). Ø (2 HOLES) Ø max (mm) (mm) (mm)
4 MD Series Plug connector 42 to 174 s, dip solder, straight through, termination style LST OTT POSITIO OTT POSITIO 1 OTT POSITIO mim M2.50 THREDED SREW Ø 0.48 MD***PM****H ****** D-SHPED GUIDE PIS max 7.00 L L2.76 L3.55 L4.37 L5.94 Plug connector: 42, 82, 110, 126, 158, 174, pin, mm spacing, dip solder (straight) termination style. OMPOET SIDE Ø 0.70 min Ø 0.05 LST HOLE POSITIO x3 2 1 Ø (2 HOLES) Ø 0.10 (mm) (mm) (mm) Mounting pattern, in parallel arrangement board-to-board connection, (recommended P hole configuration). 156
5 Plug connector 42 to 174 s, surface mount termination style MD Series LST OTT POSITIO OTT POSITIO 1 OTT POSITIO 2 M PLES S MD***PM****H D-SHPED GUIDE PIS ****** max S0.75 mm S1.10 mm S1.60 mm S1.85 mm Plug connector: 42, 82,110,126,158,174, pin, mm spacing, board package thickness from 1.00 to 4.20 mm. SIDE OPPOSITE MTIG FE LST TERMIL POSITIO (mm) (mm) (mm) ontact pattern numbering max 0.55 min VIEW SIDE 4.10 max Ø 2.70 min P MTG HOLE 2 PLES OETOR DIMESIOS EDGE OF ORD P SIDE 5.00 min P SIDE VIEW SIDE Mounting pattern, daughterboard application. 157
6 MD Series Receptacle connector 42 to 174 s 8.00 max D-SHPED GUIDE SOKETS MD***EF****H ****** 2.10 L2.76 L3.55 L4.37 L OTT POSITIO 1 OTT POSITIO 2 L M2.50 THREDED SREW 0.60 min Ø VIEW - Dip solder, straight terminal equipped. VIEW - ut wire wrap post terminal equipped. LST OTT POSITIO Receptacle connector: 42,82,110,126,158,174, socket, mm spacing, dip solder (straight), and wire wrap post termination style. OMPOET SIDE Ø 0.70 min 0.05 x3 2 1 Ø (2 HOLES) Ø 0.10 LST HOLE POSITIO Mounting pattern, motherboard application, (recommended P hole configuration) min D min Ø (2 HOLES) Ø (mm) (mm) (mm) D (mm) Recommended panel cut-out. 158
7 MD Series Receptacle connector 42 to 174 s, surface mount tail termination style D-SHPED GUIDE SOKETS 2.10 MD***EF****H xxxx max M2.5 2 PLES S S0.75 mm S1.10 mm S1.60 mm S1.85 mm OTT POSITIO 1 OTT POSITIO 2 LST OTT POSITIO Receptacle connector: 42,82,110,126,158,174, socket, mm spacing, board package thickness from 1.00 to 4.20 mm. SIDE OPPOSITE MTIG FE LST TERMIL POSITIO (mm) (mm) (mm) ontact pattern numbering max 0.55 min VIEW SIDE 4.10 max min P MTG HOLE 2 PLES EDGE OF ORD OETOR DIMESIOS P SIDE 5.00 min P SIDE VIEW SIDE Mounting pattern, daughterboard application. 159
8 MD Series Receptacle connector 42 to 174 s, dip solder, right angle, termination style 8.00 max D-SHPED GUIDE SOKETS 2.10 MD***EF****H ****** x OtaT POSITIO 1 OtaT POSITIO 2 M2.50 THREDED THRU HOLE L2.76 L3.55 Ø 0.48 L4.37 LST OtaT POSITIO Receptacle connector: 42, 82, 110, 126, 158, 174, socket, mm spacing, dip solder (right angle) termination style. OMPOET SIDE Ø 0.70 min Ø max Ø 2.70 (2 HOLES) 0.00 Ø 0.10 x LST HOLE POSITIO Mounting pattern, extender board and in line board-to-board applications, (recommended P hole configuration) (mm) (mm) (mm) D (mm)
9 MD Series Plug connector: 220, 236 and 316 s, dip solder, right angle, termination style LST OTT POSITIO OTT POSITIO 1 OTT POSITIO 2 Ø 2.70 THRU 3 PLES D-SHPED GUIDE PIS L2.76 L3.55 L ±0.10 M1.6 THREDED SREW L MD***PM***** ****** max Ø 0.48 SEE DETIL SETIO x3 DETIL M1.6 THREDED UT SETIO - Plug connector: 220, 236, 316 pin, mm spacing, dip solder (right angle) termination style. OMPOET SIDE 7.62 Ø 0.70 min Ø 0.05 LST HOLE POSITIO x3 2 1 Ø (3 HOLES) Ø 0.10 (mm) (mm) (mm) Mounting pattern, daughterboard application, (recommended P hole configuration) max 161
10 MD Series Plug connector: 220, 236 and 316 s, dip solder, straight through, termination style LST OTT POSITIO 7.62 OTT POSITIO 1 OTT POSITIO 2 M2.50 THREDED SREW 0.65 min Ø L MD***PM***** ****** L2.76 L3.55 L4.37 L5.94 D-SHPED GUIDE PIS max Plug connector: 220, 236, 316 pin, mm spacing, dip solder (straight) termination style. OMPOET SIDE min DI Ø 0.05 LST HOLE POSITIO Ø (3 HOLES) Ø 0.10 x3 2 1 Mounting pattern, in parallel arrangement board-to-board connection, (recommended P hole configuration). (mm) (mm) (mm)
11 MD Series Plug connector: 220, 236 and 316 s, surface mount tail termination style LST OTT POSITIO 7.62 OTT POSITIO 1 OTT POSITIO 2 M PLES S MD***PM***** ****** max S0.75 mm S1.10 mm S1.60 mm S1.85 mm D-SHPED GUIDE PIS Plug connector: 220, 236, 316 pin, mm spacing, board package thickness from 1.00 to 4.20 mm. SIDE OPPOSITE MTIG FE 2 LST TERMIL POSITIO 1 (mm) (mm) (mm) ontact pattern numbering max min VIEW SIDE 4.10 max min P MTG HOLE 2 PLES OETOR DIMESIOS EDGE OF ORD P SIDE 5.00 min P SIDE VIEW SIDE Mounting pattern,daughterboard application. 163
12 MD Series Receptacle connector 220, 236 and 316 s 8.00 max D-SHPED GUIDE SOKETS 2.10 L2.76 L3.55 L4.37 L5.94 MD***EF*****H ****** 7.00 M2.50 THREDED SREW 0.60 min Ø OTT POSITIO 1 OTT POSITIO 2 VIEW - DIP SOLDER, STRIGHT TERMIL EQUIPPED VIEW - UT WIRE WRP POST TERMIL EQUIPPED. L LST OTT POSITIO Ø 2.60 THRU Ø 4.50; 3.00 DEEP 7.62 Receptacle connector: 220, 236, 316 socket, mm spacing, dip solder (straight) and wire wrap post termination style. OMPOET SIDE 7.62 Ø 0.70 min Ø 0.05 x3 2 1 Ø (3 HOLES) Ø 0.10 LST HOLE POSITIO Mounting pattern, motherboard application, (recommended PW hole configuration). 4.20± min D min Ø 2.70 D min 0.00 (3 HOLES) 0.20 Recommended panel cut-out. (mm) (mm) (mm) D (mm)
13 MD Series Receptacle connector 220, 236 and 316 s, surface mount tail termination style D-SHPED GUIDE SOKETS max MD***PM***** M2.5 3 PLES ****** S S0.75 mm S1.10 mm S1.60 mm S1.85 mm OTT POSITIO 1 OTT POSITIO 2 LST OTT POSITIO 7.62 Receptacle connector: 220, 236, 316 socket, mm spacing, board package thickness from 1.00 to 4.20 mm. LST TERMIL POSITIO SIDE OPPOSITE MTIG FE (mm) (mm) (mm) ontact pattern numbering max min VIEW SIDE 4.10 max Ø 2.70 min P MTG HOLE 3 PLES EDGE OF ORD OETOR DIMESIOS P SIDE 5.00 min P SIDE VIEW SIDE Mounting pattern,daughterboard application. 165
14 MD Series Receptacle connector 220, 236 and 316 s, dip solder, straight through, termination style 8.00 max D-SHPED GUIDE SOKETS MD***EF****H ****** x OTT POSITIO 1 OTT POSITIO 2 M2.50 THREDED THRU HOLE L Ø 0.48 L2.76 L3.55 L4.37 LST OTT POSITIO 7.62 Receptacle connector: 220, 236, 316 socket, mm spacing, dip solder (right angle) termination style. OMPOET SIDE 7.62 Ø 0.70 min Ø max Ø (3 HOLES) x Ø 0.10 LST HOLE POSITIO Mounting pattern, extender board and in line board-to-board applications, (recommended P hole configuration). (mm) (mm) (mm)
15 MD Series Hardware code TYPE Y -POLRIZED MLE GUIDE PI: pos. 00: without Loctite pos : with Loctite 242 (blue) LTERL POSITIO TYPE P -OMIPOLRIZED MLE GUIDE PI: pos. 37: with Loctite 242 (blue) TYPE K -SREW LOK pos. 39: without Loctite ETRL POSITIO -Whithout guide Hardware code for plug connector, right angle terminal style LTERL POSITIO TYPE Y -POLRIZED MLE GUIDE PI: pos : without Loctite TYPE P -OMIPOLRIZED MLE GUIDE PI: pos. 37: without Loctite TYPE K -SREW LOK pos. 39: without Loctite ETRL POSITIO - ot available Hardware code for plug connector, straight thru terminal style LTERL POSITIO TYPE Y -SPER WREH: ref. order POLRIZED MLE GUIDE PI: pos. 00: without Loctite pos : with Loctite 242 (blue) TYPE P -OMIPOLRIZED MLE GUIDE PI: pos. 37: with Loctite 242 (blue) ETRL POSITIO - Screw M2.5x5: with Loctite (blue) Hardware code for plug connector, surface mount tail terminal style 167
16 MD Series Hardware code LTERL POSITIO TYPE Y -POLRIZED FEMLE GUIDE: pos : without Loctite Positioner TYPE P -OMIPOLRIZED FEMLE GUIDE: pos. 37: without Loctite ETRL POSITIO - Screw M2.5x12: without Loctite Positioner Positioner Hardware code for receptacle connector, right angle terminal style LTERL POSITIO TYPE Y -POLRIZED FEMLE GUIDE: pos : without Loctite TYPE P -OMIPOLRIZED FEMLE GUIDE: pos. 37: without Loctite TYPE K -SREW LOKIG: pos. 39: with Loctite 242 (blue) ETRL POSITIO - Without guide - Without guide Hardware code for receptacle connector, straight thru and wire wrapp terminal style LTERL POSITIO TYPE Y -SPER WREH: ref. order POLRIZED FEMLE GUIDE: pos : with Loctite 242 (blue) TYPE P -OMIPOLRIZED FEMLE GUIDE: pos. 37: with Loctite 242 (blue) ETRL POSITIO - Screw M2.5x6: with Loctite 242 (blue) Hardware code for receptacle connector, surface mount tail terminal style 168
CMD CONNECTOR SERIES
MD ONNETO SEIES onnectors HYEOLOID TEHNOLOGY Smiths onnectors offers an extensive range of superior contact technologies suitable for standard and custom solutions. Hypertac (HYEboloid contat) is the original
SMA Interface Mating Dimensions (Per MIL-STD-348)
SMA Series SMA 6 SMA Interface Mating Dimensions (Per MIL-STD-348) SMA Interface Dimensions MALE Inches/Millimeters 3 Minimum Nominal Maximum LTR in. mm in. mm in. mm A.250 6.35.263 6.68.. B.1790 4.55.1808
STANDARD MICRO-D CONNECTORS
STANDARD MICRO-D CONNECTORS RECTANGULAR CONNECTORS Pigtail connector - Metal shell.............................. 56 Pigtail connector - Low profile - Metal shell.................... 58 Pigtail connector
Directory chapter 04
M Directory chapter 04 D-Sub Mixed subminiature D connectors New Page D-Sub mixed connector system general information................... 04.02 Contact arrangements............................................
Directory chapter 02 - DIN Power (to 6 A) Types D, E, F, FM, 2F, F9, interface connectors I/U 02. 01. Technical characteristics types D and E... 02.
Directory chapter 02 - () Types D, E, F, FM, 2F, F9, interface connectors I/U Page Technical characteristics types D and E.............................. 02.10 Type D connectors.................... 02.11
UTS discrete wire sealing
Technical characteristics Mechanical Durability: 250 matings & unmatings Vibration resistance: Sinusoidal vibrations per CEI 605-4 - from 10 to 2000 Hz Thermal shock: 5 cycles 30 min. from -40 C to 105
08. SEK IDC CONNECTORS
. IDC CONNECTORS connectors for flat cables enable simple and, cost-optimized device configuration. connectors are preferably used for connection within the device. HARTING offers a broad range of these
3M Mini D Ribbon (MDR) Connectors.050 Surface Mount Right Angle Receptacle - Shielded 102 Series
M Mini D Ribbon (MDR) Connectors.050 Surface Mount Right Angle Receptacle - Shielded 102 Series Wiper-on-wiper contact for reliable repetitive plugging Ultra-low signal skew for high data rate transmission
SOURIAU s discrete wire sealing
SOURIAU s discrete wire sealing Description Using proven grommet technology from SOURIAU s extensive knowledge of harsh environments, the UTO & UTS connectors with grommet garantie a discrete wire sealing
Amphenol C 091 A/B/D. Circular Connectors. Amphenol-Tuchel Electronics GmbH
Amphenol C 091 A/B/D Circular Connectors Amphenol-Tuchel Electronics GmbH C 091 A Main Features Metal threaded coupling acc. to IEC. Number of contacts are 2 to 8, 12 and 14. Internal metal strain relief
CCM05 SD, MMC & minisd
For one of the most common card formats, we offer various reading options in a small and sturdy packaging. This includes the smaller standard of the minisd, designed for the mobile communication needs.
SMS - Qikmate. Performance characteristics
- Qikmate Qikmate panel and cable connectors Description The versatile Qikmate panel and cable connectors are a highly cost-effective system approach to solving the constant demand for more cost effective
CIN::APSE MICROMINIATURE D-SUB
INTRODUCTION CINCH has been producing filter connectors for years and has acquired an in depth knowledge of EMC protection. CINCH offers fast delivery on a wide range of standard filtered connectors and
.093 [2.36] Commercial Pin and Socket Connectors
![.093 [2.36] Commercial Pin and Socket Connectors](/thumbs/40/21560042.jpg ".093 [2.36] Commercial Pin and Socket Connectors")
Product Facts Polarized Cavity identification Low contact-mating force Dual locking lances Detent and positive locking Contacts available in brass and phosphor bronze with tin and gold plating Panel mounting
ANOISON HPQN SERIES HPQN CONNECTORS INTERFACE DIMENSIONS. Description. Interface Dimensions 21 Characteristics
SERIES HPQN CONNECTORS DESCRIPTION CONTENT Designed by James Qu at Anoison in 2006, the HPQN is a quick locking version of the widely used type N connector. By replacing the threaded interface of the original
CONEC SnapLock. 1 Introduction
CONEC SnapLock E L E C T R O N I C C O N N E C T O R S 1 Introduction The new CONEC SnapLock locking system consists of D-SUB connectors and D-SUB hoods allowing quick and safe locking without any additional
IEC Connectors. Introduction
Introduction IEC Connectors A full range of quality mains rated inlets, outlets and connectors conforming to IEC and EN 60320 specifications carrying UL, CSA, VDE and other approvals. With electrical ratings
.062 [1.57] Commercial Pin and Socket Connectors
![.062 [1.57] Commercial Pin and Socket Connectors](/thumbs/40/21560048.jpg ".062 [1.57] Commercial Pin and Socket Connectors")
Pin and Socket onnectors MP Product Facts Polarized avity identification Low contact-mating force Dual locking lances Detent and positive locking ontacts available in brass and phosphor bronze with tin
This product can be assembled to the baseplate maintaining 5 mm center-to-center spacing. Thus any number of poles can end-to-end stack.
page 1/5 Plug-in Screw Connector System for Printed Circuit Boards 950-NLFL-DS 5.00 mm (0.197 in) Spacing - 2-12 poles PICTURES 950-NLFL-DS 950-NLFL & 971-SLK TECHNICAL INFORMATION Description This two
AmphenolR. Now you're connected!
Table of Contents CoolPower Overview... Page 3 CoolPower Slim Drawer - DW Series... Page 4 CoolPower D-Sub - LCC17 Series... Page 7 Amphenol Power Solutions... Page 9 Other Amphenol Commercial Products...
Universal MATE-N-LOK Connectors
Product Facts Pins and sockets can be intermixed in the same housing Positive polarization Rear cavity identification completely enclosed in housings Positive locking housings Insulation capability to.00
Amphenol Docking Connectors
1 www.amphenol-aerospace.com/boardlevel.asp mphenol Docking onnectors mphenol erospace offers the ideal connector for applications where frequent docking to charge and transfer data is a necessity. Utilizing
INNOVATION SUPPORTED BY A TRULY SOLID INDUSTRIAL ORGANIZATION.
CONNECTORS 2014 INNOVATION SUPPORTED BY A TRULY SOLID INDUSTRIAL ORGANIZATION. Stelvio Kontek S.p.A. is one of the leading groups in the connectors market. With a solid background in the sector and having
PC/104, PC/104 -Plus, VarPol connectors
164 PC/104, PC/104 -Plus, VarPol connectors Definitions 166 Technical specifications 168 Hole specifications 169 PC/104 170 PC/104-Plus 172 Accessories: PC/104 and PC/104-Plus 174 VarPol angled pin header
AMP. 5.0 mm Power Key Connectors (5.0 PKC) (Wire-to-Board) Soft Shell Pin and Socket Connectors. Product Facts. Standard Density
5.0 mm Power Key Connectors (5.0 PKC) (Wire-to-Board) Product Facts Compact design with 19.4 mm mated height Power circuit connector with 5.0 mm contact centerline Wire-to-board connectors consisting of
Series Connectors for PCB
HE 8 / 127 Series Connectors for PCB MAIN CHARACTERISTICS Main features The 127 series circuit board connectors are available in 3 different versions: HE 801 / 127: E 301/B From 17 to 144 signal contacts,
FOR BOARD-TO-CABLE CONNECTION
FOR OARD-TO-ALE ONNETION 230 SERIES (FOR FLAT ALE ONNETION) FEATURES Two 1.27 mm (0.050 in.) pitch flat cables can be used. 1.27 mm (0.05 in.) pitch contact arrangement in two rows and terminal arrangement
COAXICON Contacts. RF Coax Connectors. Product Facts
COXICON Contacts Product Facts Tyco Electronics provides a variety of contacts for coaxial connectors Contacts are available in a range of sizes that may be used with the various types of coaxial cable
USB3.0 Micro-B Connector
USB3.0 Micro-B Connector ZX360 Series General The ZX360 Series is a Micro-USB connector that is compliant with the MicroUSB 3.0 specifications and supports up to 5Gbps high speed data transmission. As
DL AND DBA SERIES CONNECTORS QUALIFIED TO MIL-DTL-83723 SERIES III Weight-saving aluminum connectors designed for rugged use and high temperatures
DEUTSCH DL AND DBA SERIES CONNECTORS QUALIFIED TO MIL-DTL-83723 SERIES III Weight-saving aluminum connectors designed for rugged use and high temperatures DEUTSCH DL AND DBA SERIES CONNECTORS Weight-saving
The Wild Children of D38999
micro38999 Series High Vibration Miniature Connectors The Wild Children of D38999 A complete range of space saving compact connectors with all of the features and capabilities of D38999 for harsh applications.
Mini USB and USB 2.0-IP67 Connector System
Mini USB and USB 2.0-IP67 Connector System Section 12 Mini USB and USB 2.0-IP67 Connector System CONEC has added the Mini-USB connector. This Mini-USB IP67 receptacle and plug family, feature a bayonet
Interface RF Connector with Switch
NEW Interface RF onnector with Switch Series Overview Designed for end user applications requiring redirection of transmission from internal built-in antenna to the external antenna. Small size, lightweight
A Division Of AVX Corporation. DIN Connectors
A Division Of AVX Corporation DIN Connectors Index by DIN Style Introduction & Applications 4 Press-Fit 7 Design Aids 8 Approvals 8 Technical Specifications 11 Plating 12 Military Cross Reference 12 STYLE
QM (1.78mm-.070") CONNECTORS-"MICRO 70"
QM (1.78mm-.070") CONNECTORS-"MICRO 70" General Designed to fill the needs of high density and miniature interconnection, the QM series are Super-Small IDC Connection. This IDC plug uses I/O Cable
SMZ type 43 INTRODUCTION. The Radiall Type 43 coaxial connector range. Type 43 series - Features and benefits
INTRODUCTION The Radiall Type 43 coaxial connector range The Radiall range of Type 43 series connectors is fully approved (where applicable) to BT (British Telecom) standards as well as to British Standard
PRODUCT SPECIFICATION
ipass TM / ipass+ TM 0.8 mm PITCH I/O CONNECTOR SYSTEM EXTERNAL ipass / ipass+ of TABLE OF CONTENTS.0 SCOPE... 3.0 PRODUCT DESCRIPTION... 3. PRODUCT NAME AND SERIES NUMBER(S)... 3. DIMENSION, MATERIALS,
1000 Series Miniature Slide Switches
Miniature Switches Features/Benefits Variety of actuators and terminations Panel mount tabs available Epoxy terminal seal compatible with bottom-wash cleaning RoHS compliant Typical Applications Test &
AC SERIES DUAL 1/4 (6.35mm) / XLR
AC SERIES DUAL 1/4 (6.35mm) / XLR The AC Series C type chassis receptacles feature two connectors in the one space saving housing. A combined XLR female receptacle together with a 6.35mm (1/4 ) phone jack
AC SERIES-C TYPE DUAL CONNECTORS JACK/XLR
AC SERIES-C TYPE DUAL CONNECTORS JACK/XLR The AC Series C type chassis receptacles feature two connectors in the one space saving housing. A combined XLR female receptacle together with a 6.35mm (1/4 )
SD Memory Card Connectors
SD Memory Card Connectors DM Series Withstands higher force of card insertion. Card Standard type Metal cover extends over the back of the connector. Features. Withstands higher force of card insertion
AZ420 MINIATURE GENERAL PURPOSE RELAY
MINIATURE GENERAL PURPOSE RELAY FEATURES Rugged construction for high reliability Life expectancy greater than 0 million operations DC coils to 11 V Power consumption as low as 2 mw per pole available
SMA Connectors. RF Coax Connectors. Product Facts
SMA Connectors Product Facts Performance to 12.4 GHz and beyond Available in various base metal options, including stainless steel, brass and zinc diecast Uses industry standard crimp tools and processes
400 Series Buccaneer BUCCANEER POWER. bulgin
bulgin BUCCANEER FOR POWER Contact Retainer Sealing Gasket O Ring Contacts Locking Ring Retaining Nut Panel Body Contacts Contact Carrier O Ring Main Body Cable Gland Collet Gland Nut Sealed to IP68 when
Magnetic and Hydraulic-Magnetic Circuit Breaker 8340-G2...
Magnetic and Hydraulic-Magnetic Circuit Breaker 840-G2... Description Single, two and three pole magnetic circuit breakers with trip-free mechanism and push/pull on/off manual actuation. A choice of fast
Micro-USB connectors meeting requirements of USB 2.0 Standard
NEW Micro-USB connectors meeting requirements of USB 2.0 Standard ZX Series Note: Contact us to ascertain whether a TID number has been acquired for an individual product. Overview Extremely small high
Trapezoidal-Connectors Series TMC
Trapezoidal-Connectors Series TMC Subminiature-D Connectors to DIN 41 652/IEC 807-3 General Series TMC connectors are available in 5 different housing sizes with 9, 15, 25, 37 and 50 pins. In applications
Now Available in Black Zinc Nickel
847/848 Series Power Supply up to 63 Now vailable in lack Zinc Nickel The 847/848 bayonet Series has been especially designed for light and harsh environment. Its physical characteristics and performances
MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors
MP Economy Power (EP) Connectors Table of Contents 2 Introduction This catalog has been designed to assist you, our customer, identify products to satisfy your connector needs for printed circuit board
ONE OF THE SMALLEST SNAP-ACTION SWITCHES IN THE WORLD. FEATURES Superminiature type, light-weight snap action switch PC board terminal type (0.
ONE OF THE SMALLEST SNAP-ACTION SWITCHES IN THE WORLD SWITCHES FEATURES Superminiature type, light-weight snap action switch PC board terminal type (0.2g) Solder terminal type with mounting holes (0.3g)
3M Serial Attached SCSI (SAS) Connector Boardmount Compliant Pin and Surface Mount, Vertical Receptacle
M Serial Attached SCSI (SAS) Connector 6 Gbps input/output connector for backplane applications Two contact mating levels for early-mate and latebreak allows blind mating or hot swap applications Capable
Physical. Electrical. Environmental. Insulation: Contact: Plating: Temperature Rating: -55 C to +85 C
M I/O Interconnect System 2.0 mm for IEEE 194 Wiremount Receptacle (Female) E206 Series Designed to mate to all M I/O Interconnect System 2.0 mm for IEEE 194 Boardmount Plugs Polarized to provide proper
Micro-USB connectors meeting requirements of USB 2.0 Standard
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
Givare NC-SRS 280 och 880
Givare NC-SRS 280 och 880 Aratron AB/Nordic Control, 02 03 SRS280SEALED ROTARY SENSOR PERFORMANCE ±2 Resistance ±20% Hysteresis (repeatability) Accuracy Applied voltage maximum Resolution Output smoothness
Jack to Jack adapters Plug to Plug U-Link connectors PCB Right angle plastic PCB Right angle - metal. Ordering Codes
BNC 75Ω RF CONNECTORS BNC 75Ω RF CONNECTORS To meet the need for higher performance, impedance matched cable interconnections, Amphenol offers a full line of 75 ohm BNC connectors. These connectors can
Signaling Lights. LH Series Surface Mount Indicators. Part Numbers. Jumbo Dome (one color) Jumbo Dome (two color)
Innovative indicators in a slim & stylish design. uces installation space. LH Series Surface Mount Indicators Key features of the LH series include: Direct mounting on surfaces such as panels, aluminum
Figure 1 (end) Updated document to corporate requirements Added text to Paragraph 2.4
This specification covers the requirements for application of ELCON Drawer Series Connectors: True Hot Plug, Blind Mating Mixed Signal and Power Connectors. These connectors are designed for use in pluggable
14 PHOENIX CONTACT Courtesy of Power/mation. 1310 Energy Lane, Saint Paul, MN 55108. info@powermation.com - 800-843-9859 - www.powermation.
14 PHOENIX CONTACT PLUSCON circular is a circular connector for use in industrial automation. The range of design sizes available is varied, starting with the design sizes M5 to M8 and M1, for sensor/actuator
FASTON Terminals and Connectors
Introduction Product Facts Straight, right-angle and receptacle-tab combinations available Receptacles available for 6.3 mm, 4.8 mm and 2.8 mm tab size (.250,.187 and.110 Series) Receptacles mate with
400 Series - Mini USB Buccaneer
IP68 Sealed IP68 rated USB V2.0 performance Plug and play capability Shielded system Overmoulded cables Screw coupling PCB versions Dust and waterproof to EN60529 Data rates up to 480Mbs Hot pluggable,
CUSTOM MICRO-D SOLUTIONS
CUSTOM MICRO-D SOLUTIONS CUSTOM DESIGN CONNECTORS Custom design connectors................................ 206 Materials & finishes.................................... 207 69 and 74 way Micro-D connectors........................
Rugged Design plus up to 15% Savings in Weight. Technology Update. Applications. New Design/Development Flexibility and Reduced Leadtimes
Technology Update With the increasing demand for lighter weight and more rugged filter connectors, ITT Electronic Components, has advanced the state of the art in filter technology with the new Cannon
TEST SOLUTIONS CONTACTING - SEMICONDUCTOR
ENGINEERED TO CONNECT CONTACTING - SEMICONDUCTOR TEST SOLUTIONS SPECIFICATIONS AND DRAWINGS ARE SUBJECT TO ALTERATION WITHOUT PRIOR NOTICE - DIMENSIONS IN MILLIMETER CONTACTING - SEMICONDUCTOR 3 SEries
Positronic Provides Complete Capability
Catalog C-017 Rev H Experience Founded in 1966 Involvement in the development of international connector specifications through EIA, IEC and ISO as well as PICMG. Introduction of new and unique connector
AP Series Industrial Pushbutton Switch
P Series Features/Benefits IP67 sealed 1,000,000 life cycle Illumination / non-illumination Multiple colored caps Threaded or snap-in mounting Caps available separately RoHS compliant Typical pplications
1 pole, 16 A Screw terminal connection 35 mm rail (EN 60715) mounting. 2 pole, 8 A Screw terminal connection 35 mm rail (EN 60715) mounting
Series - Relay interface modules 8-10 - 16 A Features.01.02 1 & 2 pole relay interface modules, screw terminal socket, mm wide. Ideal interface for PL and electronic systems.01-1 Pole 16 A.02-2 Pole 8
Technical. Specifications. fischer Rugged Flash Drive. New. Rugged Solution for Safe Data Storage in Harsh Environment
fischer Rugged Flash Drive New Rugged Solution for Safe Data Storage in Harsh Environment Headquarters Fischer Connectors SA Ch. du Glapin 20 1162 Saint-Prex Switzerland Phone +41 21 800 95 95 mail@fischerconnectors.ch
3M Pin Strip Header Single and Dual Row.100,.235 /.318 Mating Length, Straight & Right Angle, Solder Tails 929 Series
M Pin Strip Header Single and Dual Row.100,.25 /.18 Mating Length, &, Solder Tails 929 Series Stackable Gold, Matte Sn, or -Lead plating options High Temperature (PCT) plastic for Wave or IR soldering
AMP Soft Shell Pin and Socket Connectors
Soft Shell Pin and Socket Connectors Restriction on the use of Hazardous Substances (RoHS) t Tyco Electronics, we re ready to support your RoHS requirements. We ve assessed more than 1.5 million end items/components
I-PEX MHF4 Micro Coaxial Connector
PRODUCT SPECIFICATION I-PEX MHF4 Micro Coaxial Connector Plug P/N 20448-001R-81 Receptacle P/N 20449-001E RF Connector, RF Cable & Antenna Manufacturer E-mail: sales@wellshow.com.tw Tel: +886-2-24239376
picomax The Pluggable Connection System
picomax The Pluggable Connection System TECHNOLOGY THIS SPECIALIZED CAN T MEET ALL REQUIREMENTS. YES IT CAN. CONTENTS picomax Pin spacing: 3. mm/0.138 in;.0 mm/0.197 in; 7. mm/0.29 in Versatile Pluggable
Two Position Cable-to-Board Power Connector System (Right Angle/Straight) with Coding Contacts
Product Specification 108-19346 17 APR 2013 Rev F Two Position Cable-to-Board Power Connector System (Right Angle/Straight) with Coding Contacts 1. SCOPE 1.1. Content NOTE The product may not perform according
AMPSEAL* Automotive Plug Connector and Header Assembly
AMPSEAL* Automotive Plug Connector and Header Assembly Application Specification 24 SEP 97 Rev E All dimensions are given in millimeters unless otherwise specified. All dimensional tolerances are +0.2
Operating Temperature Range: -30 to +85ç (Note 1) Operating Humidity Range: 40 to 80%
All non- products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website search at www.hirose-connectors.com, or contact your Hirose sales representative.
Elma Bustronic VPX Test Extender User Manual
Elma Bustronic VPX Test Extender User Manual Elma Bustronic used creative engineering to solve a major problem in developing the VPX Extender Board - the lack of a right angle receptacle for VPX in the
PRODUCTS SPECIFICATION
PRODUCTS SPECIFICATION ************************************************************************************** Description : DVI Connector Customer : COMOSS P/N : DV Series Date of Issue : 20-Sep-2002 Version
Waterproof Connectors for Outdoor Use
Waterproof Connectors for Outdoor Use HR41A Series Mated condition diagram Nut-tightening rear mount type (panel thickness=mm) 70.5 Features 1. Waterproof connector designed for outdoor use Light-weight
FEATURES. Catalog C-031 Rev. H
FEATURES Average power contact resistance is less than 0.001 ohms Average signal contact resistance is less than 0.005 ohms RoHS compliant Catalog C-031 Rev. H - The Leader in Power Connector Solutions
600H and 600NH series
600H and 600NH series Toggle switches - high amperage Distinctive features and specifications Construction Terminal and contact support are manufactured from a single piece of metal. The contacts are resistance-welded
Selector Switch Type 08
Compact and versatile 2 positions multi wafer selector switch For PCB mounting 25,000 switching cycles with up to 9.0 Ncm switching torque Gold plated contacts: micron Robust metal housing with metal shaft
XG2. Flat Cable Connectors for PCBs. Achieve Total Cost Reduction through High-density Mounting and Reduced Wiring. Terminal Arrangement
Flat Cable Connectors for PCBs XG2 Achieve Total Cost Reduction through High-density Mounting and Reduced Wiring IDC connections allow you to wire all terminals at once without terminating the cable. Can
3M Pin Strip Header 2 mm 2 mm Solder Tail Straight & Right Angle, Surface Mount Straight 1512 Series
M Pin Strip Header 2 2 Solder Tail Straight & Right Angle, Surface Mount Straight 1512 Series Mates with a variety of dual row 2 board mount and wire mount sockets High temperature insulator compatible
W1 Connector W1 Adapter W1 Termination
Data Sheet W1 Connector W1 Adapter W1 Termination DC to 110 GHz A complete coaxial connector system with mode-free performance to 110 GHz Features Excellent RF Performance to 110 GHz 50Ω Impedance Low
PCb Cable mount twinax. ConneCtorS
PCb Cable mount twinax ConneCtorS technical CharaCteriStiCS SPeCiFiCationS temperature rating: -55 C to + 125 C Corrosion: MIL-STD-202 Method 101, Test Condition B Shock: MIL-STD-202 Method 213, Test Condition
01. HARTING RJ INDUSTRIAL RJ45 ETHERNET CONNECTORS
. HARTING RJ INDUSTRIAL ETHERNET CONNECTORS Ethernet is is coming up to standard industrial interface. Therefore, automation devices such as controllers, sensors and actuators feature possess on one or
Technical Customer Documentation Technische Kunden Unterlage (TKU) 2TP 334 DO E0001. Keylock switches SPC 266
1 von 7 Part number V42266-...(see page 6) Description Keylock switch Last revision : No. page Description of Modification 00 Origin document Siemens Datasheet 01 01..2010 1-7 Take-over of the documents
C R I M P F L E X C O N N E C T O R S
JULY 2007 - C.CS.1000 / GB C R I M P F L E X C O N N E C T O R S CRIMPFLEX connectors CRIMPFLEX CONNECTORS Technical data...3 CRIMPFLEX CRIMPING Description...4 FEMALE CONTACTS Typical contact application...5
CIN::APSE COMPRESSION TECHNOLOGY GET CONNECTED...
CIN::APSE COMPRESSION TECHNOLOGY E N A B L I N G T E C H N O L O G Y F O R T H E M O S T D E M A N D I N G I N T E R C O N N E C T A P P L I C AT I O N S GET CONNECTED... CIN::APSE It takes more than an
PCI Express Right Angle Connector System
PI Express Right ngle onnector System www.erni.com atalog E XXXXXX 09/08 Edition 1 www.erni.com atalog E XXXXXX 09/08 Edition 1 PI Express Right ngle onnector System Table of ontents General...2 Features...2
1 mm Pitch Double Rows Low Profile Board-to-Cable Connectors
NEW mm Pitch Double Rows Low Profile Board-to-Cable Connectors DF series Cable.4 Socket DF- **DS-C.8 DFF(G)- **DP-V Pin Header DF- **DS-C Socket Cable 6. PCB DFF **DP-H. Pin Header PCB Features. Contact
ODU MEDI-SNAP. Miniature Circular Connectors with Push-Pull Locking Made of Plastic or Metal. www.odu.de
Miniature Circular Connectors with Push-Pull Locking Made of Plastic or Metal Miniature Circular Connectors with Push-Pull Locking for Medical Applications Applications Medical Test and measure equipment
SlimSeal SSL Connector. Now Available in 1 Position. Free Hanging Version
Now Available in 1 Position Free Hanging Version SlimSeal SSL Connector The SlimSeal SSL connectors are low profile, single row connectors developed for indoor and outdoor LED lighting applications. These
0.8 U N /0.5 U N 0.8 U N /0.5 U N 0.8 U N /0.5 U N 0.2 U N /0.1 U N 0.2 U N /0.1 U N 0.2 U N /0.1 U N
55 Series - General purpose relays 7-10 A Features 55.12 55.13 55.14 Printed circuit mount, general purpose 2, 3 & 4 Pole relays 55.12-2 Pole 10 A 55.13-3 Pole 10 A 55.14-4 Pole 7 A AC coils & DC coils
VG96929 Reverse Bayonet Single-Pole Connectors
Reverse Bayonet Single-Pole High-Current, Low-Voltage Power for Ruggedized Military and Industrial Applications United States United Kingdom Germany France Nordic Italy Spain Japan High Voltage Electrical
Catalog C-004 Rev. F
Catalog C-004 Rev. F Experience Founded in 1966 Involvement in the development of international connector specifications through EIA, IEC and ISO as well as PICMG. Introduction of new and unique connector
Index. 2.40 mm Connector Series. 2.40 mm Connectors (50 GHz)... Page. Interface Standards... 44. Specifications... 45. Connector Numbers...
Connector Series Index (50 GHz).... Page Interface Standards... 44 Specifications... 45 Connector Numbers... 46 Typical Test Data... 48 End : can be found in the Adapter section. : can be found in the
Model CS 64 Mini-DIN Cable and Adaptor
Model CS 64 Mini-DIN Cable and Adaptor Page 1 of 9 Features Hi-Pro and NOAHlink compatible cable & Mini-DIN CS 64 Clip Module / NOAHlink Adaptor #1 Integrated Clip Module - Mini-DIN Cable Integrated NOAHlink
8060 Series Alternate Action and Momentary Pushbutton Switches
Features/Benefits Long travel vailable with LED Long life contact design Epoxy terminal seal compatabile with bottom wash cleaning RoHS compliant models available Typical pplications Instrumentation Computers
60 Series - General purpose relays 6-10 A. Features 60.12 60.13
Features 60.12 60.13 Plug-in mount 10 A General purpose relay 2 & 3 pole changeover contacts Cadmium Free contacts (preferred version) AC coils & DC coils UL Listing (certain relay/socket combinations)
7000 Series Buccaneer
The all plastic and metal construction of the - circular that combine the ease of use of a quick coupling mechanism with proven environmental sealing for signal and mains power. Designed and independently