Now Available in Black Zinc Nickel

Transcription

1 847/848 Series Power Supply up to 63 Now vailable in lack Zinc Nickel The 847/848 bayonet Series has been especially designed for light and harsh environment. Its physical characteristics and performances are appreciated in a large range of applications including military ground equipment and heavy weapons. nvironment friendly RoHS black zinc nickel: 848 Series. 500 hours salt spray. Safety IN N (V ) approved. Reliable Robust circular aluminum connector. Power supply up to 63 ( to 3 phase ) Large variety of backshells and wide range of wire gauges and current carrying capabilities. Standards V96918 approved and qualified.

2 847/848 Series Power Supply up to 63 escription ayonet coupling connector with crimp contacts. Qualified as per V96918 Power supply (up to 63) Pilot and ground contacts available. ontact layouts for:. Mono 220 V. Tri 220/380 + N + Pilot Technical features Materials Shell & ackshell material:. luminum. Steel. ronze (consult us) Shell & ackshell plating:. luminum: lack Zinc Nickel. Steel: Olive green cadmium White cadmium. ronze (consult us) Insulator: Neoprene ontact: rimp, machined, from brass ontact plating: Silver ndurance: 500 mating/unmating operations lectrical Operating voltage:. ontact layout 25: 220 Vrms single phase current, 250 V. ontact layouts 48 and 58: 260/440 Vrms three phase current, 500 V urrent rating:. ontact layout 25: 16. ontact layout 48: 25. ontact layout 58: 63 Withstanding voltage: Veff for shell sizes 2 and Veff for shell size 5 Shielding effectiveness:. 10kHz - 3MHz 70d min.. 100MHz MHz 40d min. nvironmental Temperature range: - 55 to + 85 (125 peak) Sealing (immersion): 1 bar - 24 hours Salt spray resistance: 500 hours Pollution degree 3: according to IN N ontact layouts MONO 220 V + TRI 260/440 V + N + Pilot + TRI 260/440 V + N + Pilot + 2

3 847/848 Series Power Supply up to 63 Ordering information SOURIU part numbers - with contacts and backshells asic Series N 3 08 Shell material and plating 7: Steel shell with cadmium plating (see specification below) or ronze shell (see specification below) 8: luminum shell with black zinc nickel plating ontact layout: 25, 48, 58 (see previous page) Shell type : Square flange receptacle, smooth holes, without thread for backfitting : Square flange receptacle, smooth holes, with thread for backfitting L: Square flange receptacle, threaded holes, without thread for backfitting M: Square flange receptacle, threaded holes, with thread for backfitting : Plug P: able connecting receptacle : Jam nut receptacle with thread for backfitting R: Jam nut receptacle without thread for backfitting ontact type 1: rimp male contact 5: rimp female contact ackshell type 00: Receptacles (, L, R types), without thread for backfitting receptacles (, M, ) Plugs and cable connecting receptacles supplied without backshell 21: Straight cable clamp and sealing gland backshell 23: lbow cable clamp and sealing gland backshell 47: Straight backshell for shield termination and heatshrink sleeving 48: Straight backshell for shield termination and heatshrink sleeving and tightening shield ring (for contact layout 48 & 58 only) Orientation: N, W, X, Y Insert type 0: Without grommet, without pilot contact. Only for contact layout 25 and 48 1: With grommet, without pilot contact. ontact layout 58: insert is only with grommet 2: Without grommet, with pilot contact. Only for contact layout 48 3: With grommet, with pilot contact. iller plug supplied. Only for contact layout 48 and 58 Specification: 02: Stainless steel shell with olive green cadmium plating 03: Stainless steel shell with olive green cadmium plating with specific contacts 07: ronze version (consult us) 08: luminum shell with black zinc nickel plating 09: Stainless steel shell with white cadmium plating V96918 part numbers asic Series V P N Shell type 1: ixed connector with mounting flange 1: ixed connector with mounting flange and adapter for shielding braid : ixed connector for single hole mounting : ixed connector for single hole mounting and adapter for shielding braid : able connecting receptacle with adapter for shielding braid : ree plug with adapter for shielding braid ontact layout: 25, 48, 58 (see previous page) ontact type P: Male contact S: emale contact Orientation: N, W, X, Y Plating None: Steel shell with olive green cadmium plating : Marine bronze : luminium shell with black zinc nickel plating 3

4 847/848 Series Power Supply up to 63 imensions Type - Plug V96918 Style for 847/848 form with backshell 47 type 47 type type H J 21 type M L K N Shell size Max. Max. Max. Max. Max. H J Max. K Max. L Max. M Max. N Max Thickness Note: ll dimensions are in millimeters (mm) 4

5 847/848 Series Power Supply up to 63 Type and L Type - Square flange receptacle without thread for backfitting V96918 Style 1 for 847/848 form asket Threaded holes (L Type) Smooth holes ( Type) 4 ±0.1 Shell size Max. Max. Max. Max. Max. Smooth holes Threaded holes M M M5 42 Thickness R Type - Jam nut receptacle without thread for backfitting V96918 Style for 847/848 form R 3 H J 4 7 Shell size Max. Max. Max. Max. H Max. J M22x M36x M48x Thickness Note: ll dimensions are in millimeters (mm) 5

6 847/848 Series Power Supply up to 63 Type and M Type - Square flange receptacle with thread for backfitting V96918 Style 1 for 847/848 form with backshell 47 type Threaded holes (M Type) Smooth holes ( Type) Panel 3.5 L H J K 47 type M 48 type N K T S R 21 type P Shell size Max. Max. Max. Max. Max. H J Max. K Max Shell size L Max. M N Max. P Max. R Max. S Max. T Max. Smooth holes Threaded holes M M M5 46 Thickness Note: ll dimensions are in millimeters (mm) 6

7 847/848 Series Power Supply up to 63 Type - Jam nut receptacle with thread for backfitting V96918 Style for 847/848 form with backshell 47 type 4 J K 47 type 7 L M H 3.5 N 48 type P M S T U 21 type R Shell size Max. Max. Max. Max. Max. H Max. J K Shell size L Max. M Max. N P Max. R Max. S Max. T Max. U Max Thickness Note: ll dimensions are in millimeters (mm) 7

8 847/848 Series Power Supply up to 63 P Type - able connecting receptacle V96918 Style for 847/848 form P with backshell 47 type H 47 type 3.5 K 48 type J H M N P 21 type L Shell size Max. Max. Max. H Max Shell size J Max. K L Max. M Max. N Max. P Max. Thickness Note: ll dimensions are in millimeters (mm) 8

9 847/848 Series Power Supply up to 63 Panel cut-out Square flange receptacle ll square flange receptacles Receptacle & L types 4 smooth holes ( & types) or 4 threaded holes (L & M types) Shell size Max. Unlimited Unlimited Unlimited Max Max Receptacle & M types Smooth holes Threaded holes M3 M5 M5 Jam nut receptacle Shell size Max Note: ll dimensions are in millimeters (mm) 9

10 847/848 Series Power Supply up to 63 Orientation Viewed from front face of male insulator Shell size N W X Y aps for plug & receptacle Souriau part numbers asic series ap material & plating 5: ap for 847 Series connector - Steel cap 8: ap for 848 Series connector - luminum cap Shell size 20: Size 2 40: Size 4 50: Size 5 Type : ap for receptacle with steel chain and washer : ap for receptacle with nylon cord and ring : ap for receptacle with steel chain and ring : ap for plug with steel chain and washer : ap for plug with nylon cord and ring : ap for plug with steel chain and ring : ap for receptacle with nylon cord and ring lock 4 Specification None: admium olive green plating 08: lack zinc nickel plating 07: ronze version (consult us) 10

11 4 847/848 Series Power Supply up to 63 V96918 part numbers asic series V96918 Z1 25 Style Z1: ap for plug with washer Z2: ap for plug with ring Z3: ap for receptacle with washer Z4: ap for receptacle with ring Shell size 25: Size 2 48: Size 4 58: Size 5 Material & Plating None: Steel shell with olive green cadmium plating : Marine bronze (consult us) : luminum shell with black zinc nickel plating imensions ap for plug ap for receptacle Type 32 Steel chain and washer Type 31 Steel chain and washer Type 32 Nylon cord and ring Type 31 Nylon cord and ring Type 48 Nylon cord and ring lock 4 - Mounting with insulok (Hellermann) colar Size Max. Max. Max. Max. Max. Max Note: ll dimensions are in millimeters (mm) 11

12 847/848 Series Power Supply up to 63 ontacts Only for 02, 08 and 09 specification Male contact ontact type ontact layout Phase round Pilot Phase emale contact round Pilot iller plug Reducing sleeve ontact in two parts: contact body and crimping tip. Insure sealing for version without pilot contact to order separately. for wire section 0.93 mm² for wire section 5.30 mm² } Usable for phase and ground contacts for wire section 8.98 mm² able Ø Max over insulator Pilot wire round and phase wires Shell Ø braid ackshell Type size strands Ø over insulator Section (mm²) Ø over insulator Section (mm²) 21 & Min Max Min Max Min Max Min Max able stripping or type 47 and 48 backshell Shell Size Phase round Pilot Phase round Pilot Note: ll dimensions are in millimeters (mm) 12

13 847/848 Series Power Supply up to 63 Heat shrink sleeves or type 47 and 48 backshell Shell size Straight sleeve ent sleeve K K K K K K rimping tools Shell size Plier Turret 2 M /01 (8365) M /01 (8365) Insertion and extraction tools Shell size ontact type round Phase Turret position able section (mm²) Selector position or further information contact us at contactmilaero@souriau.com or visit our web site Red lue 1.34 to to round Red 2.5 to Phase lue 2.5 to Pilot Yellow 0.50 to MS (8465) to Pilot M /01 (8365) Yellow 0.50 to ontact type round Phase Insertion tool xtraction tool Male & emale Male emale Phase round Pilot (connector without grommet) Pilot (connector with grommet) Phase round Pilot Phase Phase (with cable 5.15 mm²) round WS847848WUSN01 opyright SOURIU Jul SOURIU is a registered trademark. ll information in this document presents only general particulars and shall not form part of any contract. ll rights reserved to SOURIU for changes without prior notification or public announcement. ny duplication is prohibited, unless approved in writing. 13