Tubular connection elements
|
|
|
- Darlene Parrish
- 8 years ago
- Views:
Transcription
1 KIRÁY TRING KFT H-1151 udapest Mogyoród útja 12 14tel: Tubular connection elements 429
2 KIRÁY TRING KFT H-1151 udapest Mogyoród útja 12 14tel: Technical information on the tubular connection system in thermoplastic The tubular connection system stands out particularly thanks to its attractive design and a special reducing bush concept. losed system (one-piece basic form) This unique concept and the associated clamping of the most varied diameters and tube cross-sections permit a flexibility never before achieved. Just by replacing the bush, an existing tubular construction can be transformed into one with a different diameter or cross-section. Reducing bush for tube Ø12 25 lamping element for tube Ø18 or Ø30 Round tube enefits: - Only one clamping element per construction type - Tube reduction (from Ø12 30 or 10 25) by means of different reducing bushes for round tubes or square tubes - Tube diameter indication on each reducing bush - ushes torsion prevention inside the clamping element quare tube Reducing bush for tube 10 or 20 Half-cup elements (two-pieces basic form) The clamping elements are supplied as standard with a IN 7984 screw and a IN 985 self-locking nut. lamp levers in plastic for fixing available on request. lamping element for tube Ø30 and 30 (closed one end and half sleeve other end) Reducing sleeve for closed elements, for tubes Ø20 25 or 20 Reducing sleeve for half sleeve elements, for tubes Ø20 30 or 20,
3 K0472 KIRÁY TRING KFT H-1151 udapest Mogyoród útja 12 14tel: ross clamps, plastic P K R P matching reducer bush K0492 lack thermoplastic; socket head screw to IN 7984 and hexagon nut to IN 985 in galvanized steel K The basic size for round tubes is Ø18 mm or Ø30 mm. If smaller tubes are to be clamped or converted from round to square tubes, these can be adjusted to the required fitting by means of reducing bushes K0492. KIPP ross clamps, plastic Order No. K P R pprox. K M6x18 0,050 K ,5 77 M8x25 0,132 lamp levers in plastic for fixing. ccessory: - Reducing bushes K0492 pplication using tube connection 431
4 K0472 KIRÁY TRING KFT H-1151 udapest Mogyoród útja 12 14tel: ross clamps, aluminium ast aluminium, vibration ground; socket head screw to IN 7984 and hexagon nut to IN 985 in galvanized steel H P K K lamp levers for fixing. ccessory: R E Q G T KIPP ross clamps, aluminium 432 Order No. E G H K P Q R T pprox. K ,1 12, ,5 25, , M6x20 M6x20 0,080 K ,1 14, ,5 25, , M6x20 M6x18 0,070 K ,1 15, ,5 25, , M6x20 M6x18 0,069 K ,1 16, ,5 25, , M6x20 M6x18 0,066 K ,1 18, ,5 25, , M6x20 M6x18 0,061 K ,1 14, M8x25 M6x18 0,172 K ,1 20, M8x25 M8x25 0,252 K ,1 14, M8x25 M6x18 0,154 K ,1 25, M8x25 M8x25 0,217 K ,1 14, M8x25 M6x18 0,132 K ,1 30, M8x25 M8x25 0,173 K ,2 20, , M10x30 M8x25 0,265 K ,2 30, M10x30 M10x30 0,660 K ,17 40, M10x30 M10x30 0,519 K ,2 30, M10x35 M10x35 0,538 K ,2 50, M10x35 M10x35 0,067
5 K0472 KIRÁY TRING KFT H-1151 udapest Mogyoród útja 12 14tel: ross clamps, aluminium G K E R M R H ast aluminium, vibration ground, clamping screw with nut in galvanized steel K KIPP ross clamps, aluminium lamp levers for fixing and further diameters. ccessory: Order No. E G H K M R pprox. K ,2 30, M8x45 0,352 K ,2 40, M8x60 0,645 Notes 433
6 K0473 KIRÁY TRING KFT H-1151 udapest Mogyoród útja 12 14tel: ross clamp, plastic M8x ,5 matching reducer bush K0491 lack thermoplastic; socket head screw to IN 7984 and hexagon nut to IN 985 in galvanized steel K With the cross clamp square tubes 30 mm can be clamped. If smaller tubes are to be clamped or converted from square to round tubes, these can be adjusted to the required fitting by means of reducing bushes K0491. KIPP ross clamp, plastic Order No. pprox. K ,171 lamp levers in plastic for fixing. ccessory: - Reducing bushes K0491 K0473 ross clamps, aluminium G K R M ast aluminium, vibration ground; clamping screw with nut in galvanized steel K E R H lamp levers for fixing and further diameters. ccessory: KIPP ross clamps, aluminium 434 Order No. E G H K M R pprox. K ,2 30, M8x45 0,321 K ,3 40, M8x60 0,584
7 K0474 KIRÁY TRING KFT H-1151 udapest Mogyoród útja 12 14tel: ross clamp, plastic matching reducer bush K M8x , KIPP ross clamp, plastic 29 M8x16 matching reducer bush K0492 Order No. pprox. K , lack thermoplastic; socket head screw to IN 7984 and hexagon nut to IN 985 in galvanized steel K With the cross clamp square and round tubes 30 mm can be clamped. If smaller tubes are to be clamped or optionally converted from round to square tubes, these can be adjusted to the required fitting by means of reducing bushes K0491 or K0492. lamp levers in plastic for fixing. ccessory: - Reducing bushes K0491 and K0492 K0474 ross clamps, aluminium T P G R K ast aluminium, vibration ground; clamping screw with nut in galvanized steel K E Q H lamp levers for fixing and further diameters. ccessory: KIPP ross clamps, aluminium Order No. E G H K P Q R T pprox. K ,2 30, , M8x35 M8 x 35 0,245 K ,3 40, M8x45 M10 x 50 0,
8 K0475 KIRÁY TRING KFT H-1151 udapest Mogyoród útja 12 14tel: ngle clamps, plastic lack thermoplastic; socket head screw to IN 7984 and hexagon nut to IN 985 in galvanized steel P P K M K matching reducer bush K0492 The basic size for round tubes is Ø18 mm or Ø30 mm. If smaller tubes are to be clamped or converted from round to square tubes, these can be adjusted to the required fitting by means of reducing bushes K0492. lamp levers in plastic for fixing. F H E ccessory: - Reducing bushes K0492 R G KIPP ngle clamps, plastic 436 Order No. E F G H K M P R pprox. K , ,5 55,5 64, ,5 M6x18 0,044 K , , , ,5 75,5 M8x25 0,115
9 K0475 KIRÁY TRING KFT H-1151 udapest Mogyoród útja 12 14tel: ngle clamps, aluminium ast aluminium, vibration ground; socket head screw to IN 7984 and hexagon nut to IN 985 in galvanized steel P M K F E P K lamp levers for fixing and further diameters. ccessory: H R G KIPP ngle clamps, aluminium Order No. E F G H K M P R pprox. K ,1 12, , , M6x20 0,097 K ,1 14, , , M6x20 0,090 K ,1 15, , , M6x20 0,087 K ,1 16, , , M6x20 0,083 K ,1 18, , , M6x20 0,075 K ,1 20, , ,5 M8x25 0,279 K ,1 25, , ,5 M8x25 0,240 K ,1 30, , ,5 M8x25 0,193 K ,2 40, M10x30 0,526 K ,22 50, M10x35 0,
10 K0476 KIRÁY TRING KFT H-1151 udapest Mogyoród útja 12 14tel: ngle clamp, plastic matching reducer bush K0491 lack thermoplastic; socket head screw to IN 7984 and hexagon nut to IN 985 in galvanized steel K M8x25 29 With the angle clamp square tubes 30 mm can be clamped. If smaller tubes are to be clamped or converted from square to round tubes, these can be adjusted to the required fitting by means of reducing bushes K0491. lamp levers in plastic for fixing ccessory: - Reducing bushes K KIPP ngle clamp, plastic 438 Order No. pprox. K ,194
11 K0476 KIRÁY TRING KFT H-1151 udapest Mogyoród útja 12 14tel: ngle clamps, aluminium ast aluminium, vibration ground; clamping screw with nut in galvanized steel K M T Q U H R E lamp levers for fixing and further dimensions for square tubes. ccessory: G KIPP ngle clamps, aluminium Order No. E G H M Q R T U pprox. K ,3 30, ,5 46 M8x ,361 K ,4 40, M8x ,
12 K0476 KIRÁY TRING KFT H-1151 udapest Mogyoród útja 12 14tel: ngle clamps, aluminium H H ast aluminium, vibration ground, clamping screw with nut in galvanized steel N K E P K M R T lamp levers for fixing and further diameters. M R G ccessory: G KIPP ngle clamps, aluminium 440 Order No. E G H K M N P R T pprox. K ,1 30, M8x35 M8x15 0,250 K ,2 40, M10x30 M8x10 0,769 K ,2 50,2 50, M10x35 M10x12 0,996
13 K0477 KIRÁY TRING KFT H-1151 udapest Mogyoród útja 12 14tel: ase clamps, plastic E lack thermoplastic; socket head screw to IN 7984 and hexagon nut to IN 985 in galvanized steel K N G K R The basic size for round tubes is Ø18 mm or Ø30 mm. If smaller tubes are to be clamped or converted from round to square tubes, these can be adjusted to the required fitting by means of reducing bushes K0492. lamp levers in plastic for fixing. P ccessory: - Reducing bushes K0492 matching reducer bush K0492 KIPP ase clamps, plastic Order No. E G K N P R pprox. K ,3 26, ,5 M6x18 0,030 K ,5 41, , ,5 39 M8x25 0,
14 K0477 KIRÁY TRING KFT H-1151 udapest Mogyoród útja 12 14tel: ase clamps, aluminium E N M R ast aluminium, vibration ground; socket head screw to IN 7984 and hexagon nut to IN 985 in galvanized steel K lamp levers for fixing and further diameters. G P ccessory: O H O H K U K U hole arrangement 1 hole arrangement 2 KIPP ase clamps, aluminium 442 Order No. hole E G H K M N O P R U pprox. arrangement K ,1 5,5 29, , M6x ,064 K ,1 5,5 29, , M6x ,059 K ,1 5,5 29, , M6x ,057 K ,1 5,5 29, , M6x ,057 K ,1 5,5 29, , M6x ,052 K ,1 6,5 42, M8x ,193 K ,1 6,5 42, M8x ,164 K ,1 6,5 42, M8x ,137 K ,17 8, M10x ,387 K ,22 10, ,5 M10x ,603
15 K0478 ase clamp, plastic KIRÁY TRING KFT H-1151 udapest Mogyoród útja 12 14tel: M8x , ,5 matching reducer bush K0491 lack thermoplastic; socket head screw to IN 7984 and hexagon nut to IN 985 in galvanized steel K With the base clamp square tubes 30 mm can be clamped. If smaller tubes are to be clamped or converted from square to round tubes, these can be adjusted to the required fitting by means of reducing bushes K0491. KIPP ase clamp, plastic Order No. pprox. K ,121 lamp levers in plastic for fixing. ccessory: - Reducing bushes K0491 K0478 ase clamps, aluminium E P M H N K F Q R ast aluminium, vibration ground, clamping screw with nut in galvanized steel K G lamp levers for fixing and further dimensions for square tubes. ccessory: KIPP ase clamps, aluminium Order No. E F G H K M N P Q R pprox. K ,3 6, , M8x45 0,278 K ,4 8, M8x60 0,
16 K0479 KIRÁY TRING KFT H-1151 udapest Mogyoród útja 12 14tel: Flange clamps, plastic P matching reducer bush K0492 E lack thermoplastic; socket head screw to IN 7984 and hexagon nut to IN 985 in galvanized steel K K F M H G The basic size for round tubes is Ø18 mm or Ø30 mm. If smaller tubes are to be clamped or converted from round to square tubes, these can be adjusted to the required fitting by means of reducing bushes K0492. lamp levers in plastic for fixing. N ccessory: - Reducing bushes K0492 KIPP Flange clamps, plastic 444 Order No. E F G H K M N P pprox. K , , , M6x18 0,030 K , ,5 62, ,5 M8x25 0,084
17 K0479 KIRÁY TRING KFT H-1151 udapest Mogyoród útja 12 14tel: Flange clamps, aluminium P E F M U G K ast aluminium, vibration ground; socket head screw to IN 7984 and hexagon nut to IN 985 in galvanized steel N U H K * Oblong hole lamp levers for fixing and further diameters. ccessory: hole arrangement 1 U H R O hole arrangement 2 hole arrangement 3 KIPP Flange clamps, aluminium Order No. hole E F G H K M N O P R U pprox. arrangement K ,1 5,5* (2x) , M6x ,059 K ,1 5,5 (2x) , M6x ,063 K ,1 5,5 (2x) , M6x ,062 K ,1 5,5* (2x) , M6x ,060 K ,1 5,5 (2x) , M6x ,056 K ,1 6,5* (2x) M8x ,197 K ,1 6,5* (2x) M8x ,180 K ,1 6,5* (2x) M8x ,159 K ,17 8,5* (4x) M10x ,397 K ,17 10,5* (4x) M10x ,
18 K0479 KIRÁY TRING KFT H-1151 udapest Mogyoród útja 12 14tel: Flange clamps, aluminium K R ast aluminium, vibration ground, clamping screw with nut in galvanized steel K G H N E lamp levers for fixing and further diameters. ccessory: H M KIPP Flange clamps, aluminium 446 Order No. E G H K M N R pprox. K ,2 6, , M8x50 0,314 K ,2 6, , M8x50 0,301 K ,2 6, , M8x50 0,285 K ,2 8, M8x70 0,545
19 K0480 KIRÁY TRING KFT H-1151 udapest Mogyoród útja 12 14tel: Flange clamp, plastic ,5 54 M8x16 6, matching reducer bush K lack thermoplastic; socket head screw to IN 7984 and hexagon nut to IN 985 in galvanized steel K With the flange clamp square tubes 30 mm can be clamped. If smaller tubes are to be clamped or converted from square to round tubes, these can be adjusted to the required fitting by means of reducing bushes K0491. KIPP Flange clamp, plastic Order No. pprox. K ,125 lamp levers in plastic for fixing. ccessory: - Reducing bushes K0491 K0480 Flange clamps, aluminium K R N ast aluminium, vibration ground, clamping screw with nut in galvanized steel G H E K H M lamp levers for fixing and further dimensions for square tubes available. ccessory: KIPP Flange clamps, aluminium Order No. E G H K M N R pprox. K ,3 6, , M8x50 0,292 K ,3 6, , M8x50 0,273 K ,4 8, M8x70 0,
20 K0481 Flange clamp, plastic KIRÁY TRING KFT H-1151 udapest Mogyoród útja 12 14tel: matching reducer bush K lack thermoplastic; socket head screw to IN 7984 and hexagon nut to IN 985 in galvanized steel M8x K With the flange clamp square tubes 30 mm can be clamped. If smaller tubes are to be clamped or converted from square to round tubes, these can be adjusted to the required fitting by means of reducing bushes K0491. KIPP Flange clamp, plastic Order No. pprox. K ,090 lamp levers in plastic for fixing. ccessory: - Reducing bushes K0491 K0483 leeve clamps, plastic Q P R lack thermoplastic; socket head screw to IN 7984 and hexagon nut to IN 985 in galvanized steel matching reducer bush K0492 K The basic size for round tubes is Ø18 mm or Ø30 mm. If smaller tubes are to be clamped or converted from round to square tubes, these can be adjusted to the required fitting by means of reducing bushes K0492. KIPP leeve clamps, plastic 448 Order No. P Q R pprox. K M6x18 0,028 K , , ,8 M8x25 0,087 lamp levers in plastic for fixing. ccessory: - Reducing bushes K0492
21 K0484 KIRÁY TRING KFT H-1151 udapest Mogyoród útja 12 14tel: trap clamps with internal toothing, plastic T 15 toothing H lack thermoplastic. ocket head screw according to IN 7984 and hexagon nut to IN 985 in galvanized steel K E M G R F K trap clamps with internal toothing can be combined with strap clamps with external toothing (K0485) to make a joint clamp. The basic size for round tubes is Ø18 mm or Ø30 mm. If smaller tubes are to be clamped or converted from round to square tubes, these can be adjusted to the required fitting by means of reducing bushes K0492. lamp levers in plastic for fixing. ccessory: - Reducing bushes K0492 matching reducer bush K0492 P KIPP trap clamps with internal toothing, plastic Order No. E F G H K M P R T pprox. K ,9 6,1 25 7,5 26,5 5, , M6x18 M6-IN 985 0,028 K ,5 8, ,5 6, ,5 52,5 M8x25 M8-IN 985 0,
22 K0485 KIRÁY TRING KFT H-1151 udapest Mogyoród útja 12 14tel: trap clamps with external toothing, plastic 15 toothing H lack thermoplastic; socket head screw to IN 7984 and hexagon nut to IN 985 in galvanized steel T K E M G R F K trap clamps with external toothing can be combined with strap clamps with internal toothing (K0484, K0486 or K0487) to make a joint clamp. The basic size for round tubes is Ø18 mm or Ø30 mm. If smaller tubes are to be clamped or converted from round to square tubes, these can be adjusted to the required fitting by means of reducing bushes K0492. lamp levers in plastic for fixing. ccessory: - Reducing bushes K0492 matching reducer bush K0492 P KIPP trap clamps with external toothing, plastic 450 Order No. E F G H K M P R T pprox. K ,9 6,1 25 7,5 26,5 5, , M6x18 M6-IN 985 0,028 K ,5 8, ,5 6, ,5 52,5 M8x25 M8-IN 985 0,087
23 K0486 KIRÁY TRING KFT H-1151 udapest Mogyoród útja 12 14tel: trap clamps with internal toothing, plastic F T N lack thermoplastic; socket head screw to IN 7984 and hexagon nut to IN 985 in galvanized steel K K H 15 toothing matching reducer bush K0492 trap clamps with internal toothing can be combined with strap clamps with external toothing (K0485) to make a joint clamp. The basic size for round tubes is Ø18 mm or Ø30 mm. If smaller tubes are to be clamped or converted from round to square tubes, these can be adjusted to the required fitting by means of reducing bushes K0492. lamp levers in plastic for fixing. ccessory: - Reducing bushes K0492 E P G KIPP trap clamps with internal toothing, plastic Order No. E F G H K N P T pprox. K ,7 6, , ,5 5,7 21 M6x18 M6-IN 985 0,029 K ,5 8, ,5 95,5 6,5 28,5 M8x25 M8-IN 985 0,
24 K0487 KIRÁY TRING KFT H-1151 udapest Mogyoród útja 12 14tel: trap clamps with internal toothing, plastic X E X X P R lack thermoplastic; socket head screw to IN 7984 and hexagon nut to IN 985 in galvanized steel K trap clamps with internal toothing can be combined with strap clamps with external toothing (K0485) to make a joint clamp. M N 95 lamp levers in plastic for fixing. X T H K G F 15 toothing 2 middle flange holes by K KIPP trap clamps with internal toothing, plastic 452 Order No. E F G H K M N P R T pprox. K ,3 (2x) , ,5 5,5 M6-IN ,017 K ,5 (4x) 22 37,5 8, ,5 7,5 6,6 8,2 M8-IN ,077
25 K0488 KIRÁY TRING KFT H-1151 udapest Mogyoród útja 12 14tel: Joint clamps without toothing, plastic matching reducer bush K0492 P lack thermoplastic; socket head screw to IN 7984 and hexagon nut to IN 985 in galvanized steel N K E P G Joint clamps can be continuously shifted by 180. The basic size for round tubes is Ø18 mm or Ø30 mm. If smaller tubes are to be clamped or converted from round to square tubes, these can be adjusted to the required fitting by means of reducing bushes K0492. M H O F lamp levers in plastic for fixing. ccessory: - Reducing bushes K0492 KIPP Joint clamps without toothing, plastic Order No. E F G H M N O P pprox. K , , M6x18 0,067 K , , ,5 22,5 28,5 M8x25 0,
26 K0488 KIRÁY TRING KFT H-1151 udapest Mogyoród útja 12 14tel: Joint clamps without toothing, aluminium G P ø E H K M F R ast aluminium, vibration ground; socket head screw to IN 7984 and hexagon nut to IN 985 in galvanized steel K Joint clamps can be continuously shifted by 180. lamp levers for fixing and further diameters. ccessory: KIPP Joint clamps without toothing, aluminium 454 Order No. E F G H K M P R pprox. K ,1 12, , , ,5 M6x16 0,126 K ,1 14, , , ,5 M6x16 0,120 K ,1 16, , , ,5 M6x16 0,114 K ,1 18, , , ,5 M6x16 0,106 K ,1 20, M8x35 0,385 K ,1 25, M8x35 0,346 K ,1 30, M8x35 0,300 K ,2 40, M10x50 0,820
27 K0489 KIRÁY TRING KFT H-1151 udapest Mogyoród útja 12 14tel: Joint clamps without toothing, plastic matching reducer bush K0492 P lack thermoplastic; socket head screw to IN 7984 and hexagon nut to IN 985 in galvanized steel K R E ø H M ø E R P F Joint clamps can be continuously shifted by 180. The basic size for round tubes is Ø18 mm or Ø30 mm. If smaller tubes are to be clamped or converted from round to square tubes, these can be adjusted to the required fitting by means of reducing bushes K0492. lamp levers in plastic for fixing. ccessory: - Reducing bushes K0492 KIPP Joint clamps without toothing, plastic Order No. E F H M P R pprox. K , M6x18 0,052 K , ,5 52,5 M8x25 0,
28 K0489 KIRÁY TRING KFT H-1151 udapest Mogyoród útja 12 14tel: Joint clamps without toothing, aluminium ø ø E R ast aluminium, vibration ground; socket head screw to IN 7984 and hexagon nut to IN 985 in galvanized steel K Joint clamps can be continuously shifted by 180. H M lamp levers for fixing and further diameters. ccessory: P KIPP Joint lamps without toothing, aluminium 456 Order No. E H M P R pprox. K ,1 12, , ,5 M6x16 0,126 K ,1 14, , ,5 M6x16 0,119 K ,1 16, , ,5 M6x16 0,123 K ,1 18, , ,5 M6x16 0,104 K M8x35 0,408 K ,1 25, M8x35 0,374 K ,1 30, M8x35 0,317 K ,15 40, M10x50 0,863
29 K0490 KIRÁY TRING KFT H-1151 udapest Mogyoród útja 12 14tel: Joint clamps without toothing, plastic E R lack thermoplastic; socket head screw to IN 7984 and hexagon nut to IN 985 in galvanized steel O K 2 middle flange holes by K G F H K Joint clamps can be continuously shifted by 180. The basic size for round tubes is Ø18 mm or Ø30 mm. If smaller tubes are to be clamped or converted from round to square tubes, these can be adjusted to the required fitting by means of reducing bushes K0492. N lamp levers in plastic for fixing. ccessory: - Reducing bushes K0492 P matching reducer bush K0492 KIPP Joint clamps without toothing, plastic Order No. E F G H K N O P R pprox. K ,3 (2x) , M6x18 0,055 K ,5 (4x) , , ,5 7, ,5 52,5 M8x25 0,
30 K0490 KIRÁY TRING KFT H-1151 udapest Mogyoród útja 12 14tel: Joint clamps without toothing, aluminium E R ast aluminium, vibration ground; socket head screw to IN 7984 and hexagon nut to IN 985 in galvanized steel K M Joint clamps can be continuously shifted by 180. * Oblong hole H lamp levers for fixing and further diameters. N ccessory: O K 2 middle flange holes by K K G F U P KIPP Joint clamps without toothing, aluminium 458 Order No. E F G H K M N O P R U pprox. K ,1 5,3* (2x) , ,5 M6x ,101 K ,1 5,3* (2x) , ,5 M6x ,098 K ,1 5,3* (2x) , ,5 M6x ,095 K ,1 5,3* (2x) , ,5 M6x ,091 K ,5 (4x) M8x35-0,383 K ,1 6,5 (4x) M8x35-0,374 K ,1 6,5 (4x) M8x35-0,325 K ,2 8,5 (4x) M10x50-0,838
31 K0491 KIRÁY TRING KFT H-1151 udapest Mogyoród útja 12 14tel: Reducing bushes square lack thermoplastic K ø With the use of reducing bushes, smaller tubes can be clamped or converted from square tubes to round ones. KIPP Reducing bushes, square Order No. urface finish K for round tubes Ø 20,25 30,3 45 K for round tubes Ø 25,25 30,3 45 K for round tubes Ø 30,25 30,3 45 K for square tubes 20,5 30,3 45 K for square tubes 25,5 30,3 45 K0492 Reducing bushes round E lack thermoplastic ø +0,1 ø KIPP Reducing bushes, round +0,1 45 K With the use of reducing bushes, smaller tubes can be clamped or converted from round tubes to square ones. Order No. urface finish E K for round tubes 12, ,5 11,9 2,4 30 K for round tubes 14, ,5 11,9 2,4 30 K for round tubes 15, ,5 11,9 2,4 30 K for round tubes 16, ,5 11,9 2,4 30 K for round tubes 20, ,5 18,9 3,4 45 K for round tubes 25, ,5 18,9 3,4 45 K for square tubes 10, ,5 11,9 2,4 30 K for square tubes 20, ,5 18,9 3,
32 K0493 KIRÁY TRING KFT H-1151 udapest Mogyoród útja 12 14tel: Round and square tubes Galvanized steel ; aluminium EN W-6060, light anodized K X500 (please also indicate dimension ) The manufacturing tolerances of the round and square tubes are dependent on the specific tube fixing system. * luminium bar KIPP Round tubes - stainless steel tubes - aluminium tubes, black anodized - customer specific shapes Order No. urface finish Material escription 1 2 K X round tubes steel Ø12 x 1,5 12 ±0, /1000/2000 K X round tubes steel Ø14 x 1,5 14 ±0, /1000/2000 K X round tubes steel Ø15 x 1,5 15 ±0, /1000/2000 K X round tubes steel Ø16 x 1,5 16 ±0, /1000/2000 K X round tubes steel Ø18 x 1,5 18 ±0, /1000/2000 K X round tubes steel Ø20 x 2 20 ±0, /1000/2000 K X round tubes steel Ø25 x 2 25 ±0, /1000/2000 K X round tubes steel Ø30 x 2 30 ±0, /1000/2000 K X round tubes steel Ø40 x 4 40 ±0, /1000/2000 K X round tubes steel Ø50 x 4 50 ±0, /1000/2000 K X round tubes aluminium Ø20 x /1000/2000 K X round tubes aluminium Ø25 x /1000/2000 K X round tubes aluminium Ø30 x 2 30 ±0, /1000/2000 K X round tubes aluminium Ø40 x 3 40 ±0, /1000/2000 K X round tubes aluminium Ø50 x 3 50 ±0, /1000/2000 KIPP quare tubes Order No. urface finish Material escription K X square tubes steel 20 x 20 x 1 20 ±0, /1000/2000 K X square tubes steel 25 x 25 x 1,5 25 ±0, /1000/2000 K X square tubes steel 30 x 30 x 2 30 ±0, /1000/2000 K X square tubes steel 40 x 40 x 3 40 ±0, /1000/2000 K X square tubes aluminium 10 x 10 10* - 500/1000/2000 K X square tubes aluminium 20 x 20 x 1,5 20 ±0, /1000/2000 K X square tubes aluminium 30 x 30 x 2 30 ±0, /1000/2000 K X square tubes aluminium 40 x 40 x 4 40 ±0, /1000/2000
33 K0494 KIRÁY TRING KFT H-1151 udapest Mogyoród útja 12 14tel: Tube stoppers N N lack thermoplastic K Tube stoppers are used as edge protectors or for the closure of tube ends. Mounting can be by pushing them in by hand or by knocking them in with a softface hammer. KIPP Tube stoppers Order No. urface finish N uitable for K for round tubes 18 5 Ø18 x 1,5 K for round tubes 20 5 Ø20 x 2 K for round tubes 25 5 Ø25 x 2 K for round tubes 30 5 Ø30 x 2 K for round tubes 40 5 Ø40 x 3 K for round tubes 40 5 Ø40 x 4 K for round tubes 50 5 Ø50 x 3 / Ø50 x 4 K for square tubes x 20 x 1 K for square tubes x 25 x 1,5 K for square tubes x 30 x 2 K for square tubes x 40 x 3 K for square tubes x 40 x 4 461
34 KIRÁY TRING KFT H-1151 udapest Mogyoród útja 12 14tel: Technical information on the tubular linear unit The tubular linear unit is efficient, economical and universally applicable. High rigidity, low deflection, high loads and easy handling are ideally combined in the linear unit. Four sizes of linear units are available for different applications and loads (guide tubes from Ø18 mm to Ø50 mm). oad data*: F force [N] M moment [Nm] I geom. moment of inertia [cm4] Features: Travel of more than 2000 mm possible Position accuracy up to ±0.2 mm / 300 mm Travelling speed up to 1.5 m/min riven by ME threaded spindle Installation as desired Technical description: threaded spindle with follower nut in the guide tube converts a rotating movement into a linear movement of the carriage. This is protected against torsion by a carrier wedge. Fy Fz Fx Fixation of the linear unit: epending on the mounting position and application, the linear unit can be attached using fastening elements. The clamping elements of the tubular connection system are available for this. peed: n = required spindle r.p.m. max. spindle rpm with: plain bearing 80 rpm. ball bearing 250 rpm. n [r.p.m.] = peed [m/min] x 1000[mm] pindle pitch [mm] Type E Pitch mm Mx Mz ength Fx Fy Fz / 1000 / / 1000 / 1500 Type E / 10 / - 60 / 8 / - Type E / 60 / / 50 / 9 Type E / 250 / / 140 / 50 Type E / 600 / / 600 / 140 My No-load torques: Type E pindle with slide bearing pindle with [Nm] ball bearing [Nm] 18-0, ,45 0, ,65 0, ,20 0,90 Type E Mx My Mz Iy Iz 18 1, ,22 0, ,34 1, ,58 5, ,31 12,32 * referring to the guide carriage (guide element deflection f = 0.5 mm, static, end elements supported) 462
35 K0495 inear units KIRÁY TRING KFT H-1151 udapest Mogyoród útja 12 14tel: flange clamp guide 2 stroke 2 Precision tube according to IN EN 10305, stainless steel For type E 18, galvanized steel. Trapezoidal thread spindle steel, clockwise thread, rolled. P1 K X500 V1 ø 7,5 inear unit K M J 7,5 1 1 ø 1 Medium rotation speed range, self-locking. If using a position indicator, only use linear units with ball bearings. eft-hand thread, stainless steel finish, 2 drive cones, further strokes or handwheels. ccessory: - lamp guides K0496, K0497, K0498, K lamping elements of the tubular connection system - igital position indicators K0410 and insert plate K0413 KIPP inear units Functional principle: rotating movement of the threaded spindle is converted into a linear movement of the guide carriage. Order No. urface finish Type E pindle troke 1 J 1 2 M P1 V1 pprox. tandard length parallel key IN 6885 K X300 slide bearing 30 Tr 14x h x 2 x 20 M4x8 0,800 K X500 slide bearing 30 Tr 14x h x 2 x 20 M4x8 1,276 K X800 slide bearing 30 Tr 14x h x 2 x 20 M4x8 1,947 K X300 slide bearing 40 Tr 20x h , x 4 x 32 M6x10 1,984 K X500 slide bearing 40 Tr 20x h , x 4 x 32 M6x10 2,920 K X800 slide bearing 40 Tr 20x h , x 4 x 32 M6x10 4,785 K X1000 slide bearing 40 Tr 20x h , x 4 x 32 M6x10 5,865 K X500 slide bearing 50 Tr 20x h , x 4 x 32 M6x10 4,368 K X800 slide bearing 50 Tr 20x h , x 4 x 32 M6x10 6,288 K X1000 slide bearing 50 Tr 20x h , x 4 x 32 M6x10 7,568 K X300 ball bearing 18 Tr 10x h , x 2 x 12 M3x5 0,355 K X500 ball bearing 18 Tr 10x h , x 2 x 12 M3x5 0,550 K X300 ball bearing 30 Tr 14x h x 2 x 20 M4x8 0,800 K X500 ball bearing 30 Tr 14x h x 2 x 20 M4x8 1,276 K X800 ball bearing 30 Tr 14x h x 2 x 20 M4x8 1,947 K X300 ball bearing 40 Tr 20x h , x 4 x 32 M6x10 1,984 K X500 ball bearing 40 Tr 20x h , x 4 x 32 M6x10 2,920 K X800 ball bearing 40 Tr 20x h , x 4 x 32 M6x10 4,785 K X1000 ball bearing 40 Tr 20x h , x 4 x 32 M6x10 5,865 K X500 ball bearing 50 Tr 20x h , x 4 x 32 M6x10 4,368 K X800 ball bearing 50 Tr 20x h , x 4 x 32 M6x10 6,288 K X1000 ball bearing 50 Tr 20x h , x 4 x 32 M6x10 7,
36 K0496 KIRÁY TRING KFT H-1151 udapest Mogyoród útja 12 14tel: ross clamp guides V1 M ast aluminium, black powder-coated; socket head screw to IN 7984 and hexagon nut to IN 985 in galvanized steel K lamp levers for fixing. type E V2 KIPP ross clamp guides Order No. Type E M V1 V2 464 K ,5 20 M6x16 M6x16 K M8x25 M8x25 K M8x25 M8x25 K M10x30 M8x25 K M10x30 M10x30 K M10x35 M10x35 K M10x35 M10x35
37 K0497 KIRÁY TRING KFT H-1151 udapest Mogyoród útja 12 14tel: ross clamp guides ast aluminium, black powder-coated; clamping screw with nut in galvanized steel K V1 M lamp levers for fixing. type E V2 KIPP ross clamp guides Order No. Type E M V1 V2 K M8x35 M8x35 K M10x50 M8x45 K M8x50 M8x50 465
38 M4 M2 K0498 KIRÁY TRING KFT H-1151 udapest Mogyoród útja 12 14tel: Flange clamp guides M1 ast aluminium, black powder-coated; socket head screw to IN 7984 and hexagon nut to IN 985 in galvanized steel K V1 * Oblong hole. lamp levers for fixing. M5 M3 type E KIPP Flange clamp guides Order No. Type E M1 M2 M3 M4 M5 V1 466 K ,5 50 5,5 (2x) M6x16 K ,5* (2x) M8x25 K ,5* (4x) M10x30 K ,5* (4x) M10x35
39 K0499 KIRÁY TRING KFT H-1151 udapest Mogyoród útja 12 14tel: ase clamp guides M3 M1 ast aluminium, black powder-coated; socket head screw to IN 7984 and hexagon nut to IN 985 in galvanized steel K V1 * Oblong hole. lamp levers for fixing. M2 M4 type E KIPP ase clamp guides Order No. Type E M1 M2 M3 M4 V1 K , M6x16 K ,5* M8x25 K ,5* M10x30 K ,5* M10x35 467
40 KIRÁY TRING KFT H-1151 udapest Mogyoród útja 12 14tel: Notes 468
41 KIRÁY TRING KFT H-1151 udapest Mogyoród útja 12 14tel: Technical information plug-in connectors High quality plastic plug-in connectors with steel core, for insertion into square tubing combination of plug-in connectors and the, for these specially developed aluminium profiles give unlimited construction possibilities. The system can be combined with many different materials, from coated chipboard up to glass and plastic sheeting. No screws required, the plug-in connectors are simply inserted into the corresponding square tubing. This means that they can be disassembled and reused repeatedly. If disassembly is to be prevented, the plug-in connectors can be secured using glue, screws or rivets. oad rating of plug-in connectors Plug-in connectors with steel core for square tubes 25x25x1.5 and 30x30x2 have a compressive strength of max. 400 per horizontal connecter plug under the following conditions: 4x400 = o.k. - the spacing between the exterior wall of the vertical tube and the outer edge of the load must not exceed 10 mm. - the bottom of the load is so rigid that load transmission occurs entirely at the vertices of the load (see diagram). max. 10 mm max. 10 mm - the loading is purely static i.e. no dynamic stress due to moving loads. Please note that the use of items such as adjustable sliders, thread plugs and swivel pads in conjunction with the plug-in connectors can decrease these values for the entire unit. Mitre uts Mitre cuts are required when square tubes with web come in contact with a plug-in connector. On request, we can supply our square tubes with web with mitre cut. In the case of a mitre cut, a 90 cut is made on the square and a 45 cut on the land. urface preparation occurs prior to the cut. i.e., the edges of cut have a natural finish. 469
42 K0615 KIRÁY TRING KFT H-1151 udapest Mogyoród útja 12 14tel: Plug connector connecting piece 1 1 Polyamide P, black. teel core inlay in steel, galvanized. K Plug system without screws. The plug connectors are simply inserted into the corresponding square tube. They can be disassembled and used again. ccessory: - quare tubes K qaure tubes with web K0628 KIPP Plug connector connecting piece Order No. 1 1 uitable for square tubes 470 K x 20 x 1,5 K x 25 x 1,5 K x 30 x 2
43 K0616 KIRÁY TRING KFT H-1151 udapest Mogyoród útja 12 14tel: Plug connector right angle 1 1 Polyamide P, black. teel core inlay in steel, galvanized. K Plug system without screws. The plug connectors are simply inserted into the corresponding square tube. They can be disassembled and used again. ccessory: - quare tubes K qaure tubes with web K0628 KIPP Plug connector right angle Order No. 1 1 uitable for square tubes K x 20 x 1,5 K x 25 x 1,5 K x 30 x 2 471
44 K0617 KIRÁY TRING KFT H-1151 udapest Mogyoród útja 12 14tel: Plug connector T-piece 1 1 Polyamide P, black. teel core inlay in steel, galvanized. K Plug system without screws. The plug connectors are simply inserted into the corresponding square tube. They can be disassembled and used again. ccessory: - quare tubes K qaure tubes with web K0628 KIPP Plug connector T-piece Order No. 1 1 uitable for square tubes 472 K x 20 x 1,5 K x 25 x 1,5 K x 30 x 2
45 K0618 KIRÁY TRING KFT H-1151 udapest Mogyoród útja 12 14tel: Plug connector cross piece 1 Polyamide P, black. teel core inlay in steel, galvanized. K Plug system without screws. The plug connectors are simply inserted into the corresponding square tube. They can be disassembled and used again. ccessory: - quare tubes K qaure tubes with web K0628 KIPP Plug connector cross piece Order No. 1 1 uitable for square tubes K x 20 x 1,5 K x 25 x 1,5 K x 30 x 2 473
46 K0619 KIRÁY TRING KFT H-1151 udapest Mogyoród útja 12 14tel: Plug connector angle with outlet 1 1 Polyamide P, black. teel core inlay in steel, galvanized. K Plug system without screws. The plug connectors are simply inserted into the corresponding square tube. They can be disassembled and used again. ccessory: - quare tubes K qaure tubes with web K0628 KIPP Plug connector angle with outlet Order No. 1 1 uitable for square tubes 474 K x 20 x 1,5 K x 25 x 1,5 K x 30 x 2
47 K0620 KIRÁY TRING KFT H-1151 udapest Mogyoród útja 12 14tel: Plug connector T-piece with outlet 1 1 Polyamide P, black. teel core inlay in steel, galvanized. K Plug system without screws. The plug connectors are simply inserted into the corresponding square tube. They can be disassembled and used again. ccessory: - quare tubes K qaure tubes with web K0628 KIPP Plug connector T-piece with outlet Order No. 1 1 uitable for square tubes K x 20 x 1,5 K x 25 x 1,5 K x 30 x 2 475
48 K0621 KIRÁY TRING KFT H-1151 udapest Mogyoród útja 12 14tel: Plug connector cross with outlet 1 Polyamide P, black. teel core inlay in steel, galvanized. K Plug system without screws. The plug connectors are simply inserted into the corresponding square tube. They can be disassembled and used again. ccessory: - quare tubes K qaure tubes with web K0628 KIPP Plug connector cross with outlet Order No. 1 1 uitable for square tubes 476 K x 20 x 1,5 K x 25 x 1,5 K x 30 x 2
49 K0622 KIRÁY TRING KFT H-1151 udapest Mogyoród útja 12 14tel: Plug connector star 1 1 Polyamide P, black. teel core inlay in steel, galvanized. K Plug system without screws. The plug connectors are simply inserted into the corresponding square tube. They can be disassembled and used again. ccessory: - quare tubes K qaure tubes with web K0628 KIPP Plug connector star Order No. 1 1 uitable for square tubes K x 20 x 1,5 K x 25 x 1,5 K x 30 x 2 477
50 K0623 KIRÁY TRING KFT H-1151 udapest Mogyoród útja 12 14tel: Plug connector angle with outlet and thread 1 M10 Polyamide P, black. teel core inlay in steel, galvanized. K Plug system without screws. The plug connectors are simply inserted into the corresponding square tube. They can be disassembled and used again. For assembly of swivel pads, rollers etc. 1 ccessory: - quare tubes K qaure tubes with web K0628 KIPP Plug connector angle with outlet and thread Order No. 1 1 uitable for square tubes 478 K x 25 x 1,5 K x 30 x 2
51 K0624 KIRÁY TRING KFT H-1151 udapest Mogyoród útja 12 14tel: Plug connector T-piece with outlet and thread 1 M10 Polyamide P, black. teel core inlay in steel, galvanized. K Plug system without screws. The plug connectors are simply inserted into the corresponding square tube. They can be disassembled and used again. For assembly of swivel pads, rollers etc. ccessory: - quare tubes K qaure tubes with web K0628 KIPP Plug connector T-piece with outlet and thread Order No. 1 1 uitable for square tubes K x 25 x 1,5 K x 30 x 2 479
52 K0625 KIRÁY TRING KFT H-1151 udapest Mogyoród útja 12 14tel: Plug connector leg 1 Polyamide P, black. ocket head screw to IN 6912 and hexagon nut IN 934, galvanized steel. K G The plug connectors are simply inserted into the corresponding square tube. They can be disassembled and used again. The specified adjustment range can be aligned continuously. 1 ccessory: - quare tubes K qaure tubes with web K0628 KIPP Plug connector leg Order No. 1 1 G uitable for square tubes 480 K x 25 x 1,5 K x 25 x 1,5
53 K0626 KIRÁY TRING KFT H-1151 udapest Mogyoród útja 12 14tel: Plug connector leg with one outlet 1 2 Polyamide P, black. ocket head screw to IN 6912 and hexagon nut IN 934, galvanized steel. K G The plug connectors are simply inserted into the corresponding square tube. They can be disassembled and used again. The specified adjustment range can be aligned continuously. The outlet can be revolved around its own axis. 1 ccessory: - quare tubes K qaure tubes with web K0628 KIPP Plug connector leg with one outlet Order No G uitable for square tubes K x 25 x 1,5 K x 25 x 1,5 481
54 K0627 KIRÁY TRING KFT H-1151 udapest Mogyoród útja 12 14tel: quare tubes Material: luminium profile. urface finish: silver-coloured anodized. K X2000 The square tubes are individually adjusted to our plug connectors. - Other lengths ( max mm) KIPP quare tubes Order No. K X , K X , K X
55 K0628 KIRÁY TRING KFT H-1151 udapest Mogyoród útja 12 14tel: quare tubes with web Material: luminium profile. urface finish: silver-coloured anodized. T K X2000 T1 The square tubes are individually compatible with our plug connectors. - Other lengths ( max mm) - Mitre cuts KIPP quare tubes with web Order No. T T1 K X ,
56 K0629 KIRÁY TRING KFT H-1151 udapest Mogyoród útja 12 14tel: crew connection for dial gauges with clamping shaft Ø 8 Material: Tempered steel urface finish: lack oxide finish, collet tempered K KIPP crew connection for dial gauges with clamping shaft Ø Order No. pprox. K ,042
57 KIRÁY TRING KFT H-1151 udapest Mogyoród útja 12 14tel: Notes 485
58 KIRÁY TRING KFT H-1151 udapest Mogyoród útja 12 14tel:
59 KIRÁY TRING KFT H-1151 udapest Mogyoród útja 12 14tel: The standard terms and conditions of sale, delivery and payment that you can find on our website apply. Heinrich Kipp Werk KG Postfach E ulz a.n. Tel.: +49 (0) Fax: +49 (0) Internet
Machine devices, jig devices
Machine devices, jig devices 853 K0697 Rolled thread studs DIN 6379 Material: Tempered steel. KIPP Rolled thread studs DIN 6379 Order No. D L B1 B2 Approx. weight g Surface finish: Thread rolled. Class
Linear modules Lifting units Rotary modules Grip modules Inductive proximity switches Plug connectors
20000 Linear modules Lifting units Rotary modules Grip modules Inductive proximity switches Plug connectors 23000 22000 21000 20000 09000 08000 07000 06000 05000 04000 03000 02000 01000 823 Notes 824 Technical
KIRÁLY TRADING KFT H-1151 Budapest Mogyoród útja 12 14tel: 061307-3801. E-mail:pzoli@kiralytrading.hu agi@kiralytrading.hu. Hinges
355 Technical information for hinges In the tables on the following pages are listed a large range of hinge variations. Many more variations are possible if hinges with guide tabs are required i.e. when
DryLin ZLW Belt Drive
Belt Drive +50º 0º DryLin toothed belt drives have been developed for the fast positioning of small loads. The linear units with toothed belt drive are corrosion resistant, light and compact, besides having
Drive shaft, servicing
Volkswagen Passat B6 - Drive shaft, servicing Стр. 1 из 41 40-7 Drive shaft, servicing Drive shafts, overview I - Assembly overview: Drive axle with CV joint VL100 40-7, Drive axle with CV joint VL100,
Linear Systems. Main Catalog
Linear Systems Main Catalog MOVITEC Linear Systems The Italian company Impex Tecniche Lineari designs and manufactures a wide range of products under the brand name MOVITEC: Electromechanical and pneumatic
Precision made in Europe. As per DIN 8606. The heart of a system, versatile and expandable.
1 von 9 Precision made in Europe. As per DIN 8606. The heart of a system, versatile and expandable. Main switch with auto-start protection and emergency off. Precision lathe chuck as per DIN 6386 (Ø 100mm).
KIRÁLY TRADING KFT H-1151 Budapest Mogyoród útja 12-14 tel: 061307-3801 Email_pzoli@kiralytrading.hu. Clamps Clamping devices
04000 Clamps Clamping devices 23000 22000 21000 20000 09000 08000 07000 06000 05000 04000 03000 02000 01000 297 04010 Adjustable straps Tempered steel 1.1191 Black oxide finish nlm 04010-101 Suitable thrust
Profile rail guides LLR
Profile rail guides LLR Content The SKF brand now stands for more than ever before, and means more to you as a valued customer. While SKF maintains its leadership as the hallmark of quality bearings throughout
PITCHED ROOF STRUCTURES
PITCHED ROOF STRUCTURES for framed and frameless photovoltaic modules Needed tools and materials: cordless screwdriver 10mm and 13mm spanners 5mm Allen key bolts, screws and tools for fixing the system
PPS-PPQ-BT-PIAS RESIN INSULATORS FOR OIL INSULATED ELECTRICAL MACHINES
PPS-PPQ-BT-PIAS RESIN INSULATORS FOR OIL INSULATED ELECTRICAL MACHINES BUSHING WITH PLUG CONNECTION WITH OUTER CONE PPS CHARACTERISTICS The PPS bushing can be used as a fixed section for the entry of medium
TRANS-05, Torque Tube Removal, Rebuilding, and Installation
TRANS-05, Torque Tube Removal, Rebuilding, and Installation Tools Metric Wrench Set Metric Socket Set Jack Stands (6 minimum) Floor Jack 8mm Cheesehead socket (also referred to as 12 point internal socket
Number Wheeler P/N Description Set Rex P/N Notes
1 607051 Base 1 A050 2 607052 Motor Cover 1 A052 3 600778 Socket Hd Cap Screw (M8x60) 2 4 607053 Scrap Receiver 1 A053 5 607054 Tank Upper Cover 1 A054 6 607055 Oil Pot 1 A055 7 607056 Strainer 1 A056
Removable Aluminium posts
Post Solent Sail Shades Ltd 120 Billington Gardens Hedge End Southampton SO30 2RT Tel/Fax: 01489 788243 www.solentsailshades.co.uk Email: info@solentsailshades.co.uk Removable Aluminium posts Single Pole
DiwiTherm, Resistance Thermometers Model TR75, with digital Display Battery or Solar Powered
Electrical Temperature Measurement DiwiTherm, Resistance Thermometers Model TR75, with digital Display Battery or Solar Powered WIKA Data Sheet TE 60.75 Applications Machinery, plant and tank construction
United Kingdom Sweden Germany Switzerland USA, Canada and Mexico China Japan France Linear Units Y07 GB Asia Pacific Italy EU-200502-03 03JUL
Linear Units Linear Units Table of Contents Introduction... 5 Introduction... 5 How to Choose a Unit...6-7 Technical Introduction...8 - Linear Units with Ball Screw Drive and Ball Guide... 3 Introduction...
Position Transducers with Restoring Spring 10, 25, 50, 75, 100 mm TR, TRS Series
Position Transducers with Restoring Spring 10, 25, 50, 75, 100 mm TR, TRS Series Special features long life 100 x 10 6 movements outstanding linearity up to ±0.075% choice of plug or cable connection DIN
ASSEMBLY INSTRUCTIONS Residential Roof solutions
ASSEMBLY INSTRUCTIONS Residential Roof solutions CROSSRAIL System USA Table of contents TABLE OF CONTENTS THE COMPANY SAFETY REGULATIONS MATERIALS REQUIRED TOOLS REQUIRED ASSEMBLY TERMS AND CONDITIONS
[ means: Save time, money and space! MAXXMILL 500. Vertical milling center for 5-side machining
[ E[M]CONOMY] means: Save time, money and space! MAXXMILL 500 Vertical milling center for 5-side machining MAXXMILL 500 MAXXMILL 500 is the ideal vertical milling center for the for the 5-axis operation
STAR Linear Bushings and Shafts Supplement RE 83 117/2001-08. Linear Motion and Assembly Technologies
STAR Linear Bushings and Shafts Supplement RE 83 117/2001-08 Linear Motion and Assembly Technologies STAR Linear Motion Technology Ball Rail Systems Standard Ball Rail Systems Ball Rail Systems with Aluminum
Rotary actuators Rotary wing drives Series RAK. Brochure
Brochure 2 Rotary wing drives, angle of rotation: 30-270 Rotary wing drive, double-acting axis geometry: single 4 Rotary wing drives, angle of rotation: 90-270 Rotary wing drive, double-acting axis geometry:
Lathe Milling Attachment
Lathe Milling Attachment By L C. MASON BY CLEVERLY stacking cold-rolled flat stock together, T-slots and slide for this lathe milling attachment are made without costly machinery. In fact, only two tools,
PREASSEMBLED ELEMENTS FOR LIFTING AND SLIDING DOORS
SYSTEM COMPONENTS PREASSEMBLED ELEMENTS FOR FIFTING AND SLIDING DOORS s r ood gn i d i l s dna gn i t f i f r o f s t neme l e de l bme s s ae r P PREASSEMBLED ELEMENTS FOR LIFTING AND SLIDING DOORS These
Number Wheeler P/N Description Set Rex P/N Notes 1 603500 Base 1 J001 2 603501 Support, Right 1 J002 3 603502 Support, Left 1 J003 4 600328 Nut (M8)
1 603500 Base 1 J001 2 603501 Support, Right 1 J002 3 603502 Support, Left 1 J003 4 600328 Nut (M8) 4 5 600130 Spring Washer (8mm) 4 6 600344 Roll Pin (M6x30) 4 7 600129 Socket Hd Cap Screw (M8x25) 4 8
Installation guide for the SafeLine type anchorage device. Tested in compliance with EN 795: 1996. No.: SE-...
Installation guide for the SafeLine type anchorage device Tested in compliance with EN 795: 1996 No.: SE-... Version: 09.10.2008 SE 67 Subject to technical alterations! Contents 1. General information
mechanics PP-Profiles Panel Profiles PT-Profiles T-Groove Plates RE-Profiles Rectangular Profiles PU-Profiles Universal Profiles
Overview PP-Profiles Panel Profiles PP 50 PP 100 PP 150 PP 200 PP 0 B 4 PT-Profiles T-Groove Plates B 5 PT PT 50 RE-Profiles Rectangular Profiles B 6 RE 15 RE 30 RE40 RE65 PU-Profiles Universal Profiles
Original Assembly Guide
TCT Multipurpose Single Bevel Sliding Compound Mitre Saw Original Assembly Guide Read instructions before assembling this tool. Table of Contents GB Assembly Guide Read instructions before assembling this
Module 5 Couplings. Version 2 ME, IIT Kharagpur
Module 5 Couplings Lesson 1 Introduction, types and uses Instructional Objectives At the end of this lesson, the students should have the knowledge of The function of couplings in machinery. Different
FAG tools for mechanical mounting and dismounting of rolling bearings. Technical Product Information
FAG tools for mechanical mounting and dismounting of rolling bearings Technical Product Information Contents Mechanical mounting and dismounting of rolling bearings 2 Tools for mounting 4 Mounting tool
TRIMMING UNIT/DIAMOND MACHINE TST.13
TRIMMING UNIT/DIAMOND MACHINE TST.13 REFERENCE BOOK rel. 02.15 TRIMMING UNIT/DIAMOND MACHINE TST.13 REL. 02.15 ENGLISH LANGUAGE 1 MACHINE DESCRIPTION TST.13 was designed and built for processing methacrylate.
Fluid Level Gauge Fluid Level Sensor Temperature Switch FSA / FSK / TS
Fluid Level Gauge Fluid Level Sensor Temperature Switch FSA / FSK / TS up to size 381; to PN 0.5; to T = 80 C 1. Description 1.1. General FSA fluid level gauges, FSK fluid level sensors and TS temperature
United Kingdom Sweden Germany Switzerland USA, Canada and Mexico China Japan France Linear Units Y07 GB Asia Pacific Italy EU-200502-03 03JUL
Linear Units Danaher Motion - Helping you build a better machine, faster Danaher Corporation combined over 30 industry-leading brands such as Kollmorgen, Thomson, Dover, Pacific Scientific, Portescap,
MONDOATHENS BASKETBALL SET (Reference PK110)
MONDOATHENS BASKETBALL SET (Reference PK110) DESCRIPTION The MONDOATHENS backstop unit is mainly designed for multi-sports pavilions and installations where the highest-level basketball competitions are
ASSEMBLY INSTRUCTIONS ACCORDING TO SAE J1453 FOR FLARED TUBES. 5. Clean properly with appropriate products the part of the tube to be flared.
ASSEMBLY INSTRUCTIONS ACCORDING TO SAE J1453 FOR FLARED TUBES 1. Before to start to flare the tube check for the correct parameters of all the tools to be used and substitute 2. Cut the tube at a 90 angle
Product catalogue, tank cleaning systems
Product catalogue, tank cleaning systems Aquamat Tank cleaning units Aquarex Tank cleaning systems www.hammelmann.com Contents (Navigation via Bookmarks) Tank cleaning units L XL XXL High pressure lance
Double-Headed Screw 1. 3/4" FIP x 3/4" MIP x 1/4" hole 2. 3/4" Fip x 3/4" MIP. Feed Water Connector 1. 1/2" FIP x 1/2" MIP x 1/4" OD 2. 3.
Picture Item No. Description RO- 0010 Brass Water Feed 1. 3/4" FIP with 1/4" hole 2. Using on R.O. tank RO- O020 Double-Headed Screw 1. 3/4" FIP x 3/4" MIP x 1/4" hole 2. 3/4" Fip x 3/4" MIP RO- 0030 Brass
Standard Sleep Pod Side Entry Assembly Instructions
Standard Sleep Pod Side Entry Assembly Instructions www.podtime.co.uk enquiries@podtime.co.uk Working House Ltd How to assemble your pod Pod assembly onsite is a relatively simple exercise for two people
Pneumatic actuators The Original! Technics of the top class.
Automatic valves Actuators Accessories Pneumatic actuators The Original! Technics of the top class. Leaflet no. S1-01e-13 Table of contents Advantages and your benefits...page 3 Figure: actuator...page
EXTeRUS. EXTeRUS - With patented design, able to join technology. and quality of materials with a charming shape. Unique
EXTeR US G L A S S - With patented design, able to join technology and quality of materials with a charming shape. Unique thanks to its outstanding loading capability with 150 kg maximum weight and height
LU6X-130 Instructions and Parts List (including LU6X Basic) Operating Instructions
LORTONE LU6X-130 Item # 061-092 LU6X Basic Item # 061-090 LU6X-130 Instructions and Parts List (including LU6X Basic) Operating Instructions Introduction The LU6X is one the most versatile pieces of equipment
Oil Dampers with Fixings on. Both Ends. Damping Engineering Oil Dampers with Fixings on Both Ends. Technical Data
amping Engineering Oil ampers with Fixings on Both Ends Oil dampers with fixings on both ends are used when moving objects may not exceed a certain speed e.g. flaps, lids, lever arms. They are fixed at
DMS 680. Universal length measuring system gauge inspection for»iso 9000«requirements
DMS 680 Universal length measuring system gauge inspection for»iso 9000«requirements Universal length measuring system DMS 680 Wide range of applications For periodic inspection of gauges, reference gauges,
SERVICE PARTS LIST PAGE 1 OF 6 BASE ASSEMBLY SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS 12" DUAL BEVEL COMPOUND MITER SAW B27A
PAGE 1 OF 6 BASE ASSEMBLY 00 0 EXAMPLE: Component Parts (Small #) Are Included When Ordering The Assembly (Large #). SPECIFY CATALOG NO. AND NO. WHEN ORDERING PARTS 1 02-80-0050 Thrust Bearing (1) 2 05-80-0510
Unit 24: Applications of Pneumatics and Hydraulics
Unit 24: Applications of Pneumatics and Hydraulics Unit code: J/601/1496 QCF level: 4 Credit value: 15 OUTCOME 2 TUTORIAL 2 HYDRAULIC AND PNEUMATIC CYLINDERS The material needed for outcome 2 is very extensive
Pipe Cutting and Beveling Clamshells
Pipe Cutting and Beveling Clamshells Who We Are One Company, Total Support, Complete Solutions For more than a century, Hydratight has provided world-class bolted joint solutions and continues to set international
Rexroth Linear Motion Technology
2 Bosch Rexroth Corp. Linear Motion and Assembly Technologies Ball Rail Systems R310A 2202 (2007.05) Rexroth Linear Motion Technology Ball Rail Systems Roller Rail Systems Linear Bushings and Shafts Standard
Lenntech. 1000 psi End port pressure vessels 2.5. User s Guide to: Phoenix Vessel Technology Limited. Model number: 1503
1 User s Guide to: Phoenix Vessel Technology Limited 1000 psi End port pressure vessels 2.5. Model number: 1503 Lenntech info@lenntech.com Tel. +31-152-610-900 www.lenntech.com Fax. +31-152-616-289 Phoenix
Tool Holder Catalog INDEX ABC VDI 25 LL3602.30051-10.04.2014. 0414/Rö
Tool Holder Catalog INDEX ABC VDI 25 LL3602.30051-10.04.2014 0414/Rö Disclaimer The illustrations in this documents may deviate from the delivered product. We reserve the right to make changes due to errors
Number Wheeler P/N Description Set Rex P/N Notes
1 604041 Base 1 4041 2 604042 Base Cover 1 4042 3 608849 Washer (M5) 2 4 600124 Spring Washer (M5) 2 5 600329 Rd Hd Machine Screw (M5x8) 2 6 604047 Strainer 1 4047 7 600204 Rd Hd Machine Screw (M6x10)
DATA PD-500-000. SV13.., SV14.. Levelling Valves. Product. Function. Technical Features. Range Overview
Commercial Vehicle Systems Product DATA SV.., SV.. Doc. No. Y075 (Rev. 00) PD-500-000 Function On vehicles fitted with air suspension, the Levelling Valve ensures that the axle suspension air bags maintain
Content 02/ MIG/MAG AUTOMATION. Torch heads. MIG/MAG (up to 350 A) MET 35x/39x 2. MIG/MAG (up to 450 A) MET 32xx/37xx/39xx 6
Content 02/ Torch heads MIG/MG (up to 350 ) MET 35x/39x 2 MIG/MG (up to 450 ) MET 32xx/37xx/39xx 6 MIG/MG (up to 550 ) METZ 52x/59x/54x/56x/57x 12 MIG/MG (up to 350 ) METZ 58xx 22 MIG/MG (up to 450 ) METZ
Round Housing with Side Ports
Power Steering Steering Control Unit (SCU) Parts and Repair Information 5 Series Steering Control Units 001 Square Housing with Side Ports Round Housing with Side Ports T E L RP Round Housing with End
Loewe GK Installation and operating manual
SCHMIDT-KUPPLUNG GmbH Loewe GK Installation and operating manual Loewe GK Loewe GK: angular and radial displacement compensation combined with axial stiffness. The compact coupling combines angular and
CNC Vertical Machining Center Alpha-Center HD Heavy cast iron design, precise guideways, high-performance gear designed for heavy machining
CNC Vertical Machining Center Alpha-Center HD Heavy cast iron design, precise guideways, high-performance gear designed for heavy machining Optional spindle package: 31 kw maximum power 870 Nm max. torque
Volkswagen B3 Passat Manual Transmission 02A 34 Manual Transmission - Controls, Assembly (Page GR-34) 02A 5-speed. Gearshift cable/lever installing
34 Manual Transmission - Controls, Assembly (Page GR-34) 02A 5-speed Gearshift cable/lever installing Gearshift housing repairing Gearshift lever repairing lever/relay lever, installing Gearshift mechanism
HOME GYM. Model. Retain This Manual for Reference OWNER'S MANUAL. www.hyper-extension.com
NOTE: Please read all instructions carefully before using this product Table of Contents Safety Notice www.hyper-extension.com HOME GYM 50036 Hardware Identifier Assembly Instruction Parts List Warranty
3000, 4000, 4100, 7500, 7700
3000, 4000, 4100, 7500, 7700 Drum & Disc Brake Lathes s Identification READ these instructions before placing unit in service. KEEP these and other materials delivered with the unit in a binder near the
YUASA MILLING MACHINE ACCESSORIES & TOOLS
97 HORIZONTAL / VERTICAL 5C COLLET INDEX 550 series 2 YEAR WARRANTY Spindle is manufactured with a taper seat in body frame. Rapid opening and closing is performed with a level collet closer with a leverage
TECHNICAL INFORMATION
TECHNICAL INFORMATION Models No. 2012NB Description 304mm (12") Automatic Thickness Planer CONCEPTION AND MAIN APPLICATIONS * Compact and light weight (27 Kg./59 lbs) automatic thickness planer for easier
PLQE. The base of the economy gearboxes with square output flange. Economy Line. Formerly PLE
20 ormerly PL The base of the economy gearboxes with square output flange The PL series with square output flange. A powerful alternative for additional higher radial and axial loads. Low backlash High
Char-Lynn Hydraulic Motor. Repair Information. 10 000 Series. October, 1997
Char-Lynn Hydraulic Motor October, 1997 Repair Information Geroler Motor Two Speed 001 27 Retainer inside bore of valve plate bearingless motors only 4 15 16 3 6 35 Parts Drawing 25 2 2 1 19 17 36 40 47
Laserlyte-Flex Alignment System
Laserlyte-Flex Alignment System LaserLyte-Flex The LaserLyte-Flex Alignment System is a unique, interchangeable, low cost plug and play laser system. Designed specifically for aligning and positioning
SMALLER SBD15-60 SIZE NEW NOW AVAILABLE. HepcoMotion. SBD Sealed Belt Drive
NEW SMALLER SD15-60 SIZE NOW AVAILALE HepcoMotion SD Sealed elt Drive For amendments and updates visit www.hepcomotion.com and select literature button Introduction The HepcoMotion SD is an exceptionally
INSTRUCTION. Industrial Sewing Machines. No. 010012. First published : June 1997 Second edition : March 2001
INSTRUCTION Industrial Sewing Machines First published : June 1997 Second edition : March 2001 No. 010012 INTRODUCTION Thank you for your purchasing Kansai Special's DLR Series. Read and study this instruction
Hürriyet Mah. Dr. Cemil Bengü Cad. No.27/A 34403 Çağlayan / Istanbul
Hürriyet Mah. Dr. Cemil Bengü Cad. No.27/A 34403 Çağlayan / Istanbul Tel: +9 0212 224 2392 +9 0212 225 2182 Faks:+9 0212 225 0274 Website: www.alaks.com.tr E-Mail: info@alaks.com.tr 1160F Aluminum Corner
Description. Dimensions. Features. www.pwb-encoders.com. precision works better
Description The MEC22 is a high resolution optical hollow shaft encoder that can be fixed quickly and easily on different sizes of motor shafts. The encoder provides two square wave outputs in quadrature
Volkswagen Jetta, Golf, GTI 1999, 2000 Brake System 46 Brakes - Mechanical Components (Page GR-46)
46 Brakes - Mechanical Components (Page GR-46) Front brakes Brake pads, removing and installing Brake pads, removing and installing FN 3 brake caliper, servicing FS III brake caliper, servicing Rear wheel
Tool Holder Catalog TRAUB TNX 65/42 VDI 30 HSK 40 142856-21.02.2014. 0214/Rö
Tool Holder Catalog TRAUB TNX 65/42 VDI 30 HSK 40 142856-21.02.2014 0214/Rö Disclaimer The illustrations in this documents may deviate from the delivered product. We reserve the right to make changes due
Vertical Break Parallel (VBP) / Vertical Break Slant (VBS)
August, 2009 Vertical Break Parallel (VBP) / Vertical Break Slant (VBS) Type VBPA (Aluminum) / Type VBPC (Copper) Type VBSA (Aluminum) / Type VBSC (Copper) PASCOR Air Break Switch Technology PASCOR offers
Guide rail bracket (for adjustable heads)
(for adjustable heads) Part. 209 40 ø,5 ø10,5 2 2,5 115 15 42 5 11 37 72 4 70 Code 209 / 0754 MATERIALS: Bracket made out of reinforced polyamide black colour. FEATURES: To be used with heads Part.221,
Precision Miniature Load Cell. Models 8431, 8432 with Overload Protection
w Technical Product Information Precision Miniature Load Cell with Overload Protection 1. Introduction The load cells in the model 8431 and 8432 series are primarily designed for the measurement of force
HORIZONTAL INSTALLATION
THERMO/SOLAR Žiar s.r.o. MANUAL FOR INSTALLATION PV SUPPORTING FRAMES HORIZONTAL INSTALLATION Technical alternation reserved A1410 1 12/2014 CONTENT ORD.NO. PAGE Mounting information 3 Mounting, flat roof
FAG Hydraulic nuts. Technical Product Information
FAG Hydraulic nuts Technical Product Information Contents Application 2 Design 2 Design variants 3 Pressure generators, connectors 4 Dimension tables for FAG hydraulic nuts (metric) 6 Dimension tables
ROSTA MOTORBASES ROSTA. Self-Tensioning Motor Mount for Belt Drives. without slippage self-adjusting maintenance-free
MOTORBASES Self-Tensioning Motor Mount for Belt Drives without slippage self-adjusting maintenance-free ROSTA Technology ROSTA Tensioning Motorbase Type MB for Belt Drives The ROSTA elastic tensioning
SECTION 08332 COILING COUNTER DOORS. Display hidden notes to specifier. (Don't know how? Click Here)
SECTION 08332 COILING COUNTER DOORS Display hidden notes to specifier. (Don't know how? Click Here) PART 1 GENERAL 1.1 SECTION INCLUDES A. Coiling Metal Counter Doors. B. Coiling Counter Fire Doors. 1.2
DUGARD. Machine Tools Since 1939. Dugard 700L Series Heavy Duty CNC Lathes. www.dugard.com
DUGARD Machine Tools Since 1939 Dugard 700L Series Heavy Duty CNC Lathes www.dugard.com Dugard 700L Heavy Duty CNC Lathe 2000, 3000 or 4000mm bed length Designed for easy and convenient operation The concave
C O N V E Y O R C O M P O N E N T S C H A I N S B E L T S B E A R I N G S
C O N V E Y O R C O M P O N E N T S C H A I N S B E L T S B E A R I N G S January 2009 Issue 6 Valu Guide Brackets The Ultimate in Adjustability and Cost Savings Valu Guide brackets are part of a family
Rollers. from the UK s largest roller manufacturer. Quality Performance Reliability
Rollers from the UK s largest roller manufacturer Quality Performance Reliability 42 Index Gravity Rollers Light to Medium Duty 4 Heavy Duty 5 Plastic Rollers 6 Stainless Steel Rollers 7 Grooved Rollers
DESIGN BY: ARCH. GIUSEPPE INZITARI
DESIGN BY: ARCH. GIUSEPPE INZITARI 218 FOR HIGH THICKNESS FROM 12 TO 17.5 MM - GIUMAX GIUMAX 9500 Page 220 GIUMAX 8500 Page 227 ROLLERS Page 233 GIUMAX 4500 Page 236 GIUMAX 6500 Page 244 FROM 8 TO 12 MM
Product Catalogue HW-B150H
Product Catalogue Content 1 Coverage and Terminology... 4 1.1 Design Standards... 4 1.2 Load Criteria... 5 1.3 Definition of Terms... 6 1.3.1 Flood Barrier... 6 1.3.2 Flood Height, effective Flood Height,
ROLLER GUIDE LINEAR MOTION PRODUCTS
ROLLER GUIDE LINEAR MOTION PRODUCTS 0 ROLLER GUIDE This linear motion system is based on the well known crossed roller design. A high level of High rigidity is achieved through a geometric design that
Advanced bolt assessment through process automation
Titelmasterformat Bolt Assessment inside durch ANSYS Klicken bearbeiten Advanced bolt assessment through process automation Contents Short presentation of VDI 2230 Workflow with Bolt Assessment inside
Front axle components, overview
just a test. Front axle components, overview 40-1 General Information Load bearing components and parts of the suspension must not be welded or straightened. Vehicles without drive axle must not be moved,
Shower and Floor Gullies Channel Drain and Tile Drain SECTION
Shower and Floor Gullies Channel Drain and Tile Drain SECTION 2 Shower and Floor Gullies, Channel Drain and Tile Drain 29 General Information Shower and Floor Gullies McAlpine has responded to market conditions
DRUM ROLLER. FAR-1, Article No. B69-6300-A DRUM CART FOR 200 LITER STEEL DRUMS. Model FK 1029-1 FK 1029-3 FK 1029-2 FK 1029-4
DRUM ROLLER Suitable for drums up to 200 liter capacity Made from fire-galvanized sheet steel ø 610 mm, with 4 polyamide swiveling castors ø 75 mm Model FAR-1: closed version with welded leak-proof base,
Flash Butt Welding Machines
Flash Butt Welding Machines Types AS 15 - AS 320 Flash butt welding current brake current (ka) current time flattening reversal preheating welding time flash butting forging A reliable and economic process
PVM Piston Pumps Service Manual
PVM Piston Pumps Service Manual PVM018/020 PVM045/050 PVM057/063 PVM074/081 PVM098/106 PVM131/141 Table of Contents Service Parts Pump Description... 3 Basic pump Pump Operation Controls Types Part Identification...
Style 07 Zero Flex Rigid Coupling. Style 75 Flexible Coupling. Style 77 Flexible Coupling 11. Description
Style 07 Zero Flex Rigid Coupling The unique angled pad design adjusts to standard pipe tolerances to positively clamp the pipe to resist flexural and torsional loads. Working pressures are based on standard
RATCHET RELEASE SHACKLE
RATCHET RELEASE SHACKLE INNOVATIVE PILING EQUIPMENT HYDRAULIC PILING HAMMERS EURO RATCHET RELEASE SHACKLE FOR STEEL ERECTION OPERATORS INSTRUCTIONS & SPARE PARTS LIST EXCAVATOR MOUNTED VIBRATORS EXCAVATOR
Sliding and Folding Door Fittings Sliding Door Accessories
Sliding door lock Toplock For 1- and 2-leaf sliding doors Suitable for toughened safty glass and laminated sheet glass Suitable for DIN left and DIN right Max. weight per door leaf 120 kg For glass thickness:
DELTA PT. Calculable Extra Performance
DELTA PT Calculable Extra Performance DELTA PT The Screw for Thermoplastics Optimal material flow Superior vibration resistance High torsional strength and tensile strength Calculable performance The Fastener
10 deg 4 4.3 4.6 4.9 5.2 5.5 6 6.3 6.7 7.1 7.4 7.7 8 8.3 8.6. 12 deg 4.8 5.2 5.6 6 6.4 6.8 7.2 7.6 8 8.4 8.8 9.2 9.6 10 10.4
max-prop utomatic Feathering Propeller Installation Instructions TR L LSSI 1) INTROUTION: Thank you for having chosen a Max-Prop automatic feathering propeller for your vessel. This instruction booklet
Toroidal Conductivity Sensor
Instruction Sheet PN 51A-/rev.C June 2012 Toroidal Conductivity Sensor For additional information, please visit our website at www.emersonprocess.com/rosemountanalytical.com SPECIFICATIONS Wetted Materials:
MVX-Series Diesel Engine Air Shut Down Valves
MVX-Series Diesel Engine Air Shut Down Valves (Cable operated closure/integral reset lever types) Selection, Application and Maintenance SPECIAL VALVE MVX-304 This is a special version of valve type MVX-303
K17.11 DOOR BOLTS K17 DOORS 01.09.2013
K17 DOORS K17.11 01.09.2013 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com CONTENTS 1. Locking set series 86000...K17.11.03 2.
Preface nivtec.com 3
nivtec.com Preface nivtec.com 3 nivtec 4 nivtec.com Planning with an Eye for Details nivtec.com 5 prolight+sound 2012 6 nivtec.com Meeting Point Fair Booth nivtec.com 7 Our Preparations 8 nivtec.com Enable
Displacement encoders
Displacement encoders Analogue and digital For measuring and positioning For use with pneumatic components 1 Displacement encoders Key features Analogue displacement encoders MLO-POT- -TLF Conductive plastic
Fisher 1052 Size 20 Diaphragm Rotary Actuator with F and G Mounting Adaptation
Instruction Manual 1052 Size 20 Actuator (F & G) Fisher 1052 Size 20 Diaphragm Rotary Actuator with F and G Mounting Adaptation Contents Introduction... 1 Scope of manual... 1 Description... 1 Specifications...
Ensat. Self-tapping inserts SOLID BODIES LINE
Ensat Self-tapping inserts SOLID BODIES LINE Index DESCRIPTION Page Presentation 3 Materials and Applications 4 Features 5 Preparing the receiving hole 6 Tools Codes 7 Ensat Series 302 Ensat Series 303
Series 6000 Torque measured metal bellow coupling
Properties Free of float metal bellow coupling with integrated torque measurement Non-contact measurement system, high robustness High torsional stiffness Limited torque of inertia Performance Measurement