1/8 Solenoid Operated Directional Valves, DSG-01 Series

Transcription

1 /8 Solenoid Operted Directionl Vlves, DSG-0 Series hese re Solenoid Operted Directionl Vlves of high pressure, high flow nd low pressure drop, the fetures of which cn e mterilized y employing powerful wet type solenoid nd the rtionl flow chnnel design. High ressure & High Flow Rte In comprison to our existing lines, oth the pressure nd flow of these vlves re much incresed. Mx. Operting ressure: pprox. 0 % incresed [. M ( SI)] erminl ox Mx. -Line ck ressure: pprox. % incresed [6 M ( SI)] Mx. Flow Rte: pprox. % incresed [6 L/min (6.6 U.S.GM)] Low ressure Drop he pressure drop of these vlves is reduced y 0 % from.0 to 0.9 M ( to SI), in comprison to our existing lines*; the vlves effectively reduce the energy consumption of the unit. {* t Flow Rte: L/min (.9 U.S.GM), Spool : C ( )} Compct & Smll Mss Despite of high pressure, high flow nd low pressure drop, these vlve lug-in Connector odies re compct nd lightweight with DC doule solenoids; the overll length nd mss re reduced from 0 to 0 mm (8.6 to 8.07 inch) nd from. to.8 kg (.8 to.08 ls), respectively. Shockless type ville In ddition to the stndrd vlves for high pressure nd high flow, shockless type cple of minimizing noise nd virtion in piping during spool chngeover is lso ville. Stle Opertion Due to the powerful mgnetic nd spring force of the solenoids, these vlves exhiit high tolernce to contminnts nd especilly stle opertion. I6-equivlent high dust- nd wter-proof hese vlves demonstrte excellent dust- nd wter-proof chrcteristics, in complince with I.. C. u. 9. I6 nd JIS C 090 I6 (dust- nd jet-proof type). Usle in products of vrious stndrds hese stndrd vlves re C certified for instlltion in equipment overses. UL/CS certified products re lso ville. Specifictions Vlve Model Numers Mx. Flow L/min (U.S.GM) Mx. Operting ressure M (SI) Mx. -Line ck ressure M (SI) Mx. Chngeover Frequency Cycle/min {min } Mss kg (ls.) Stndrd Shockless Low Wttge(W) C - -/90 D- -/90 - -/90 S-C - -/90 S-- -/90 L-C - -/90 L-D- -/90 L-N - -/90 L- - -/90 () 6 (6.6) 0 (0.6) () (6) 6 () () () 6 () 0 R Sol. Only R Sol. Only 0.8 (.08).(.09).8(.08).(.09).8 (.08).(.09). For detils of L-DSG-0, plese contct us.. Mximum flow indictes ceiling flow depends on the type of spool nd operting condition, refer to the List of Spool Functions on pges 7 to for detils. DSG-0 Series Solenoid Operted Directionl Vlves

2 DIRCIONL CONROLS Su-plte iping Size /8 / /8 Jpnese Stndrd "JIS " Su-plte Model Numers DSGM-0- DSGM-0X- DSGM-0Y- Mounting olt hred Size Rc /8 Rc / Rc /8 uropen Design Stndrd Su-plte Model Numers hred Size N.mericn Design Stndrd Su-plte Model Numers hred Size pprox. Mss kg (ls.) DSGM-0- /8 S. F DSGM-0-90 /8 N 0.8 (.8 ) DSGM-0X- Su-pltes re ville. Specify the su-plte model numer from the tle ove. When su-pltes re not used, the mounting surfce should hve good mchined finish. For socket hed cp screws in the tle elow re included. / S. F DSGM-0X-90 / N DSGM-0Y-90 /8 N 0.8 (.8 ) 0.8 (.8 )... Descriptions Soc. Hd. Cp Screw ( pcs.) ightening orque Jpnese Stndrd "JIS" uropen Design Stndrd N. mericn Design Stndrd Solenoid Rtings Vlve Stndrd Shockless lectric source C DC (K Series) C DC Rectified (R ) Coil D D D8 R R00 M Lg. No. 0- UNC -/ Lg. Frequency (Hz) / - 7 Nm ( - in. s.) pplicle to working pressure more thn M (6 SI): 6-7 Nm ( - in. s.) Voltge (V) Current & ower t Rted Voltge Source Rtin g Servicele Rnge Inrush () Holding () ower (W) C solenoid is not ville in shockless type. R type models with uilt-in current rectifier is recommended for shockless opertion with C power. Inrush current in the ove tle show rms vlues t mximum stroke. here re more coil types other thn the ove. For detils, plese mke inquiries DSG-0 Series Solenoid Operted Directionl Vlves he coil type numers in the shded column re hndled s opotinl extrs. In cse these coils re required to e chosen, plese confirm the time of delivery with us efore ordering. Options ush utton with Lock Nut Cn e used for mnul chngeover of spool. he push utton cn e locked in the pressed condition. SOL Lock Nut ush utton lug-in Connector with Solenoid Indictor Light hese re the indictor light incorported plug-in connector type solenoids. nergistion or de-energistion of the solenoid cn e esily identified with the incorported indictor light. lug-in Connector With Indictor Light SOL DSG-0 Series Solenoid Operted Directionl Vlves

3 Model Numer Designtion F- Specil Sels S- DS G D -C -N - -L Shockless Series Numer Vlve Size Numer of Vlve ositions Spool- Spring rrngement Spool Specil wo osition Vlve Omit if not required Coil Mnul Override lectricl Conduit Connection Design Numer Design Stndrd Models with Reverse Mtg. of Solenoid Omit if not required : hree ositions C: Spring Centred,, 0, 9 0, C: None: Mnul Override in None: erminl ox None: Jpnese Std. "JIS" 90: N.mericn Design Std. F: For hosphte ster Fluids (Omit if not required None: Stndrd S: Shockless DSG: Solenoid Operted Directionl Vlve 0 : wo ositions : hree ositions : wo ositions D: No-Spring Detented : Spring Offset C: Spring Centred : Spring Offset 8 DC: D D D8 R: (C DC) R R00 DC: D D D8 R: (C DC) R R00 C : ush utton nd Lock Nut (Option) N: lug-in Connector N : lug-in Connector with Indictor Light (Option) None: Jpnese Std. "JIS" nd uropen Design Std. 90: N. mericn Design Std. L L. In cse of the specil two position vlve, plese refer to pge for detils.. N is not ville for R type solenoids. In the tle ove, the symols or numers highlighted with shde represent the optionl extrs. he vlves with model numer hving such optionl extrs re hndles s options, therefore, plese confirm the time of delivery with us efore ordering. 6 DSG-0 Series Solenoid Operted Directionl Vlves

4 DIRCIONL CONROLS List of Stndrd Models nd he Mximum Flow Models with C Solenoids: - Mx. Flow L/min No. of Vlve ositions Spool-Spring rrngement Model Numers Grphic Symols [ort "" locked] [ort "" locked] Working ressure M Working ressure M Working ressure M hree ositions wo ositions Spring Centred No-Spring Detented Spring Offset DSG0C DSG0C DSG0C DSG0C0 DSG0C DSG0C9 DSG0C0 DSG0C DSG0C DSG0D DSG0 DSG0 DSG DSG-0 Series Solenoid Operted Directionl Vlves Notes:. he reltion etween the mximum flow in the tle ove nd the frequency/voltge (within the servicele voltge) is s shown elow. ( xmple ) Hz, t rted voltge he mximum flow rte is constnt regrdless of Hz or Hz nd of ny voltge vrints within the servicele voltge Hz, t rted voltge () 7 (8) Hz, t minimum servicele voltge (% of rted voltge) Hz, t minimum servicele voltge (90% of rted voltge). For the mximum flow rte in of the vlves with mrk, plese see pge. he vlve models with mrk re hndled s Options. If you choose such vlves, check the time of delivery eforehnd. DSG-0 Series Solenoid Operted Directionl Vlves 7

5 List of Stndrd Models nd he Mximum Flow Models with DC or R Solenoids: -D /R Mx. Flow L/mi No. of Vlve ositions Spool-Spring rrngement Model Numers Grphic Symols [ort "" locked] [ort "" locked] Working ressure M Working ressure M Working ressure M hree ositions Spring Centred DSG0C DSG0C DSG0C DSG0C0 DSG0C DSG0C9 DSG0C0 DSG0C DSG0C wo ositions No-Spring Detented Spring Offset DSG0D DSG0 DSG0 DSG Notes:. he reltion etween the mximum flow in the tle ove nd the voltge (within the servicele voltge) is s shown e low ( xmple ) he mximum flow rte is constnt regrdless of ny voltge vrints within the servicele voltge t rted voltge [fter temperture rise nd sturted] t minimum servicele voltge (90% of rted voltge) [fter temperture rise nd sturted]. For the mximum flow rte in of the vlves with mrk, plese see pge. he vlve models with mrk re hndled s Options. If you choose suce vlves, check the time of delivery eforehnd. 8 DSG-0 Series Solenoid Operted Directionl Vlves

6 DIRCIONL CONROLS List of Stndrd Models nd he Mximum Flow Models with C Solenoids: - Mx. Flow U.S.GM No. of Vlve ositions Spool-Spring rrngement Model Numers Grphic Symols [ort "" locked] [ort "" locked] Working ressure SI Working ressure SI Working ressure SI hree ositions wo ositions Spring Centred No-Spring Detented Spring Offset DSG0C DSG0C DSG0C DSG0C0 DSG0C DSG0C9 DSG0C0 DSG0C DSG0C DSG0D DSG0 DSG0 DSG08 (.) (0.8).(.6).9(.) 0.0(.0) (.) (0.8).(.6).9(.) 0.0(.0).(0.0).0(8.) 7.7(.).0(.6).(.).(0.0).0(8.) 7.7(.).0(.6).(.) (.) (.) (.) (.) (.) 8.(.) 8.(.) 8.(.) 8.(.) 8.(.) 8.(.) 8.(.) 8.(.) 8.(.) 8.(.).8(6.6).8(6.6).8(6.6).8(6.6).8(6.6).9(7.9).9(7.9).9(7.9).9(7.9).9(7.9).9(7.9).9(7.9).9(7.9).9(7.9).9(7.9).8.8(.8) 9.(.8).8.8.8(6.9).(.7) 7.9(.9)....(0.6).(.8)...(7.9) 6.6(.0) 6.6(.).(6.).(6.).(6.).(6.).(6.) 0.6(6.) 0.6(6.) 0.0(6.) 9.(6.) 9.(6.) (0.0) 0.(7.) 7.7(.0).(.6) 9.(.8).(8.) 0.0(.).(.6).(.9).(.).(0.6).(9.).(6.).9(.).(.) 8.(6.9).(6.) 8.(.).8(.).8(.6).(8.).(8.).7(8.).7(8.).7(8.).7(7.9).(7.9).(7.9).(7.9).(7.9) (.6).9(.) 0.0(.) 9.(.8) 7.(.).8(.) (0.0) 0.(7.) 7.7(.0).(.6) 9.(.8).(8.) 0.0(.).(.6).(.9).(.).(0.6).(9.).(6.).9(.).(.) 8.(6.9).(6.) 8.(.).8(.).8(.6).(8.).(8.).7(8.).7(8.).7(8.).7(7.9).(7.9).(7.9).(7.9).(7.9) (6.6) (8.7) (7.) (.) (9.8) (.) 0.6(.) 6.(.) (.) (9.8) (.) 0.6(.) 6.(.) (8.).(.) 8.(.) 0.6(.0) (9.8).(6.6) 7.7(.7).(.9).0(.6) (9.8).(6.6) 7.7(.7).(.9).0(.6) (7.).(.7) 9.0(.7) 7.(9.0).9(7.) (.).(0.6).(6.6).(.0) 9.(.8) (6.6) (8.7) (7.) (.) (9.8) (.) 0.6(.) 6.(.) (.) (9.8) (.) 0.6(.) 6.(.) (8.).(.) 8.(.) 0.6(.0) (9.8).(6.6) 7.7(.7).(.9).0(.6) (9.8).(6.6) 7.7(.7).(.9).0(.6) (.9).(.).9(0.6).9(0.6).(.9).(.).9(0.6).9(0.6).(6.6).(.) 6.6(0.6).6(8.).6(8.).(7.9).9(8.7).(7.) 0.6(7.) 0.6(7.).(8.).(8.).(8.).(8.).(8.) 8.(.7) 8.(.7) 8.(.7) 8.(.7) 8.(.7).(.) 8.(0.6).9(.).9(.6) 7.9(.6) 9.(.) 6.(.0).0(.).6(.).9(.) DSG-0 Series Solenoid Operted Directionl Vlves Notes:. he reltion etween the mximum flow in the tle ove nd the frequency/voltge (within the servicele voltge) is s shown elow. ( xmple ) Hz, t rted voltge he mximum flow rte is constnt regrdless of Hz or Hz nd of ny voltge vrints within the servicele voltge Hz, t rted voltge (.).(0.0) Hz, t minimum servicele voltge (% of rted voltge) Hz, t minimum servicele voltge (90% of rted voltge). For the mximum flow rte in of the vlves with mrk, plese see pge. he vlve models with mrk re hndled s Options. If you choose such vlves, check the time of delivery eforehnd. DSG-0 Series Solenoid Operted Directionl Vlves 9

7 List of Stndrd Models nd he Mximum Flow Models with DC or R Solenoids: -D /R Mx. Flow U.S.GM No. of Vlve ositions Spool-Spring rrngement Model Numers Grphic Symols [ort "" locked] [ort "" locked] Working ressure SI Working ressure SI Working ressure SI hree ositions Spring Centred DSG0C DSG0C DSG0C DSG0C0 DSG0C DSG0C9 DSG0C0 DSG0C DSG0C wo ositions No-Spring Detented Spring Offset DSG0D DSG0 DSG0 DSG Notes:. he reltion etween the mximum flow in the tle ove nd the voltge (within the servicele voltge) is s shown e low. ( xmple ) he mximum flow rte is constnt regrdless of ny voltge vrints within the servicele voltge. t rted voltge [fter temperture rise nd sturted] t minimum servicele voltge (90% of rted voltge) [fter temperture rise nd sturted]. For the mximum flow rte in of the vlves with mrk, plese see pge. he vlve models with mrk re hndled s Options. If you choose suce vlves, check the time of delivery eforehnd. DSG-0 Series Solenoid Operted Directionl Vlves

8 DIRCIONL CONROLS Mximum Flow of Centre y-ss In vlve type C, in cse where the ctutor is put on in etween the cylinder ports nd s illustrted elow nd where the ctutor moves nd suspended t its stroke end nd where the vlve is then shifted to the neutrl position in the suspended stte of the ctutor, the mximum flow rtes ville re those s shown s the tle elow regrdless of ny voltge in the rnge of servicele vltge. Mode Numers Grphic Symol 0 M ( SI) 6 M ( SI) Mx. Flow L/min (U.S.GM) M (6 SI). M ( SI) M ( SI) C- /D /R (.) (.6) (7.9) 6 (6.9) (.8) List of Shockless Models nd he Mximum Flow Models with DC or R Solenoids: S- -D /R Mx. Flow L/min (U.S.GM) No. of Vlve ositions hree ositions wo ositions Spool-Spring rrngement Spring Centred Spring Offset Model Numers S-C S-C S- Grphic Symol 6 (6.6) Working ressure M (SI) 0 () (.9) (.) (.9) 6 () 6 (6.6) (.) 0 (0.6) (.9) 0 (0.6) (6) 0 (0.6) 0 (0.6) 0 (.) (.9) 0 (0.6) [ort "" locked] Working ressure M (SI) 0 6 () () (6) 0 (0.6) (8.) (6.6) (8.) 0 (.) 6 (.) 0 (0.6) (8.) 6 (.) (8.) 6 (.) (.7) (7.9) (7.9) (7.9) 0 () 0 (0.6) (8.) 0 (0.6) (8.) (.9) Notes:. he reltion etween the mximum flow in the tle ove nd the voltge (within the servicele voltge) is s shown e low. [ort "" locked] Working ressure M (SI) 6 () (8.) 0 (.) (8.) 6 (.) 0 (0.6) (6) (6.6) 6 (.) 6 (.) (.7) 0 (0.6) DSG-0 Series Solenoid Operted Directionl Vlves ( xmple ) he mximum flow rte is constnt regrdless of ny voltge vrints within the servicele voltge L/min (.9) (.) 0 (0.6) U.S.GM t rted voltge [fter temperture rise nd sturted] t minimum servicele voltge (90% of rted voltge) [fter temperture rise nd sturted] DSG-0 Series Solenoid Operted Directionl Vlves

9 Reverse Mounting of Solenoid. In spring offset type, it is stndrd configurtion tht the solenoid is mounted onto the vlve in the SOL position (side). However, in this prticulr spool-spring rrngement, the mounting of the solenoid onto the vlve in the reverse position -SOL side- is lso ville. he grphic symol for this reverse mounting is s shown elow. s for the vlve type nd, plese refer to the explntion under the heding of "Vlves Using Neutrl osition nd Side osition" given elow. SOL SOL Stndrd Mtg. of Solenoid Reverse Mtg. of Solenoid Vlves Using Neutrl osition nd Side osition. (Specil wo position Vlve) esides the use of the stndrd -position vlves forementioned in the "List of Stndrd Models nd Mximum Flow", the -position vlves lso cn e used s the -position vlves using the two of their three positions. In this cse, there re two kinds of the vlve ville. One is the vlve using the neutrl position nd SOL position ( ) nd nother is the vlve using the neutrl position nd SOL position ( ). (xmple) In cse of Spool "" SOL. nergised osition Neutrl osition SOL. nergised osition "": Use of Neutrl nd SOL. nergised osition () "": Use of Neutrl nd SOL. nergised osition () Grphic SymolsG rphic Symols Model Numers Stndrd Mtg. Reverse Mtg. Model Numers Stndrd Mtg. Reverse Mtg. 0 In the ove tle, the grphic symols in mounting type highlighted with shde re optionl extr, therefore, plese confirm the time of delivery with us efore ordering. DSG-0 Series Solenoid Operted Directionl Vlves

10 DIRCIONL CONROLS ypicl Chngeover ime Chngeover time vries ccording to oil viscosity, spool type nd hydrulic circuit. Stndrd (Without Shockless Function) [est Conditions ] ressure: 6 M ( SI) Flow Rte: Viscosity: Voltge:. L/min (8. U.S.GM) mm /s (6 SSU) %V (fter coil temprture rises nd sturted) [Result of Mesurement] ON Solenoid OFF OFF Spool Shift 0 0 Mx. Stndrd Model Numers C- C- D C- R ime ms 8 9 Shockless [est Circuit nd Conditions] s Setting ressure (s): 7 M (00 SI) Lod (W): 0 kg (0 s.) Speed: 8 m/min (6. ft./min) Viscosity: mm /s (6 SSU ) ccelmeter Lod Speed [Reults of Mesurement] Shockless Stndrd SOL ccelertion(g) ressure(s) ON Model Nmers S-C- D C- D G ime ms OFF G ime ccelertion m/s (G) G G (.) 8 (.8) 7 (0.7) (.) DSG-0 Series Solenoid Operted Directionl Vlves DSG-0 Series Solenoid Operted Directionl Vlves

11 ressure Drop ressure drop curves sed on viscosity of mm /s (6 SSU) nd specific grvity of 0.8. ressure Drop Stndrd : DSG-0 0 SI M L/min U.S.GM Flow Rte Model Numers C C C C0 C C9 C0 C C D 8 ressure Drop Curve Numer Shockless : S-DSG-0 ressure Drop SI 0 M Model Numers S-C S-C S- ressure Drop Curve Numer L/min U.S.GM Flow Rte For ny other viscosity, multiply the fctors in the tle elow. mm /s Viscosity SSU Fctor For ny other specific grvity (G'), the pressure drop ( ') my e otined from the formul elow. ' = (G'/0.8) DSG-0 Series Solenoid Operted Directionl Vlves

12 DIRCIONL CONROLS RMINL OX Y Models with C Solenoids Doule Solenoid: Spring Centred & No-Spring Detented C D Solenoid Indictor Light (For Sol ).(.) Di. hrough 9.(.7) C' ore lces - -/90 0. (.9) ressure ort "" Cylinder ort "" 76.7 (.0) 0.7 (.0) Mounting surfce: ISO Single Solenoid: Spring Offset - -/90.7 (.7) SOL Cylinder ort "" nk ort "" Mounting Surfce (O-Rings Furnished) (.). (.8) Solenoid Indictor Light (For Sol ) Spce Needed to Remove Solenoid-ch nd Lock Nut ightening orque: 0.-. Nm (9- IN.ls.) Model Numers "C " hd. - - G / / N lectricl Conduit Connection "C " hd. (oth nds) Models with DC Solenoids: (S-) -D -/90 Mnul ctutor-oth nds 6(.) Di. Models with R Solenoids: (S-) -R -/90 Spring Centred No-Spring Detented Spring Offset Solenoid-ch nd (.) Di. (.0) Deep VIW RROW X Locting pin cn e fitted to this hole to conform with ISO However, locting pin is not provided to stndrd design vlve. When ordering vlve with locting pin, plese consult Yuken. Spce Needed to Remove. (.) For other dimensions, refer to "spring Centred nd No-Spring Detented" models. Solenoid eing mounted in the reverse position SOL side is lso ville. DIMNSIONS IN MILLIMRS (INCHS) DSG-0 Series Solenoid Operted Directionl Vlves Doule Solenoid Models Only Spring Offset For other dimensions, refer to models with C solenoids. DSG-0 Series Solenoid Operted Directionl Vlves

13 Su-plte : DSGM-0/0X/0Y-//90 DIMNSIONS IN MILLIMRS (INCHS) 7 (.8) Di. lces 0. (.9). (.9). (.8). (.6).7(.) 0.7 (.0). (.6). (.0) "D" hd. "" Deep lces 8. (.).8 (.0) (.).7 (.) 7. (.) 8 (.89) 6 (.8) (.6) 6 (.6) (.9) 7 (.6) (.9) "C" hd. lces 7 (.) 8 (.) 7 (.8) 7 (.8) Di. hrough (.) Di. Spotfce lces (.). (.9). (.0) 8. (.) Su-plte Model Numers DSGM-0- DSGM-0- DSGM-0-90 DSGM-0X- DSGM-0X- DSGM-0X-90 DSGM-0Y- DSGM-0Y-90 iping Size "C" hd. Rc /8 /8 S.F /8 N Rc / / S.F / N Rc /8 /8 N "D" hd. M No.0- UNC M No.0- UNC M No. 0- UNC "" mm(in.) 0 (.9) (.7) 0 (.9) (.7) 0 (.9) (.7) 6 DSG-0 Series Solenoid Operted Directionl Vlves

14 DIRCIONL CONROLS LUG-IN CONNCOR Y (N) LUG-IN CONNCOR WIH INDICOR LIGH (N) Models with C Solenoids: - - N -/90 N Models with DC Solenoids: (S-) -D - N -/90 N Models with R Solenoids: (S-) -R -N-/90 C 7. (.8) 9. (.6) D H Cle Deprture Cle pplicle: Outside Di mm (. -.9 in.) Conductor re... Not xceeding. mm (.00 Sq. in.) DIMNSIONS IN MILLIMRS (INCHS) he position of the lug-in connector cn e chnged s illustrted elow y loosening the lock nut. fter completion of the chnge, e sure to tighten the lock nut with the torque s specified elow. 6(.8) G SOL SOL F SOL K J H Doule Solenoid Models Only F SOL 8 (.) C 7 (.06) L Lock Nut ightening orque: Nm (90 - IN.ls.) Model Numers C D F G H - -N (S-) -D -N (S-) -R -N Models with ush utton & Lock Nut (S-) - -C D SOL 96. (7.7) 0. (8.0) 0. (8.0) 76.7 (.0).7 (.8) 88. (.8) 99. (.9).7 0. (.8) (.0) For other dimensions, refer to "erminl ox type" (ge 6). C:.(.0) DC/R: 6.(.6) (.09) 6 (.) 7. (.) 7. (.08) 7. (.08) (.) 9 (.) 9 (.) (.09). (.9) Lock Nut ress the "ush utton" then turn "Lock Nut" clockwise. he position of the "ush utton" is held. e sure to loosen "Lock Nut" fully efore solenoid is energised. ush utton Interchngeility in Instlltion Current nd New Design In ouder to chieve higher pressure, higher flow, lower pressure drop DSG-0 vlves hs een upgrded from the design series to the design series. he figures in the tle elow re the comprison etween the current nd the new design vlves. Specifictions Design Numer New Design: Current Design: Mx. Flow L/min (U.S.GM) () 6(6.6) Mx. Operting ressure M (SI) ().() Mx. -Line ck res. M (SI) () 6() Mx. Chngeover Frequency Cycle/min (min ) 0 (R sol. Only 0) Flow Rte: L/min (.9 U.S.GM), Viscosity: mm /s ( SSU), Spool type "" (Closed centre) ressure Drop M (SI) { } 0.9().0() Mss kg (ls.) C D F H J K L C /D.8(.08).(.8).(.09).6(.) Interchngeility in Instlltion Interchngeility in instlltion in mintined though there re minor differences in demension s in the following tle. Coil C DC R Design Numer New Design : Current Design : New Design : Current Design : 96. (7.7) 9. (7.) 0. (8.0) 0 (8.7). (.).7 (.6) 6. (.76) (.98) 6 (.8) 8 (.89) 6 (.8) 8 (.89) 88.8 (.) 90. (.6) 88.8 (.) 90. (.6) 9 (.7) 90 (.) 9 (.7) 90 (.).7 (.00).7 (.00).7 (.) (.6) 6 (.0). (.9) 6 (.0). (.9) (.76) 6 (.6) (.76) 6 (.6). (.) (.). (.) (.). (.78) 7 (.8). (.78) 7 (.8) DSG-0 Series Solenoid Operted Directionl Vlves DSG-0 Series Solenoid Operted Directionl Vlves 7

15 Detils of Receptcle of lectricl Conduit Connection Doule Solenoid Single Solenoid ower (For SOL.) ower (For SOL.) ower Suppl y Indictor Light erminl ox SOL. SOL. SOL. Common lte Indictor Light Indictor Light Common lug-in Connector -ower Suppl y -ower Suppl y. here re two grounding terminls. You cn use either one.. If you do not need the common plte, remove it.. With DC solenoids, polrity is no question. DNGR Do not perform wiring while the power is on. Doing so my result in electric shock, urns or deth. Mke the wiring properly. Improper wiring will cuse n irregulr movement of the mchine, resulting in grve ccident. lectricl Circuit of lectricl Conduit Connection lectric Source C DC C DC Rectified erminl ox ower Indictor Light ower Indictor Light ower Indictor Light Voltge-Surge Suppressor SOL. SOL. SOL. Common Common Voltge-Surge Suppressor Common Rectifier Circuit lug-in Connector -ower -ower Indictor Light (Integrted in "N" model only) SOL. -ower -ower Indictor Light (Integrted in "N" model only) SOL. Voltge-Surge Suppressor (Circuit composed in coil) -ower -ower Voltge-Surge Suppressor Rectifier Circuit SOL. 8 DSG-0 Series Solenoid Operted Directionl Vlves

16 DIRCIONL CONROLS List of Sels - - -/90 Spring Offset type SOL SOL N/N-/ List of Sels Item Nme of rts rt Numers O-Ring SO-N--0 (NR, Hs90) O-Ring SO-N-8 cking 790S-VK90-8 O-Ring S6 SOL Qty. C D O-Ring S (NR, Hs) O-Ring SO-N-8 O-Ring SO-N-0 O-Ring SO-N- lug 790S-VK89-9 When ordering the O-Rings, plese specify the sel kit numer from the tle elow. Remrks SOL Included in Solenoid ss'y (Item ) DSG-0 Series Solenoid Operted Directionl Vlves Vlve Model Numers - - -/ N-/90 Sel Kit No. KS- KS-N- O-Ring Detils for Sel Kit 8 ( cs.), 9 & ( cs., see ove), 7 ( cs.) 8 ( cs.), 9 & ( cs., see ove) Solenoid ss'y, Coil, Receptcle nd Connector Refer to pge for the detils of these prts. DSG-0 Series Solenoid Operted Directionl Vlves 9

17 Solenoid ss'y, Coil, Receptcle nd Connector ss'y No. Vlve Model Numers Solenoid ss'y No. 0 Coil No. Receptcle rt No. 8 Connector ss'y rt No. 9 Connector ss'y rt No. Remrks S- S- S- S- S- S- S- S- S- S- S- S- S D- -D- -D8- -R- -R00- -D- -D- -D8- -R- -R00- --N- -0-N- -00-N- -0-N- -D-N- -D-N- -D8-N- -R-N- -R00-N- -D-N- -D-N- -D8-N- -R-N- -R00-N- --N- -0-N- -00-N- -0-N- -D-N- -D-N- -D8-N- -D-N- -D-N- -D8-N- S-- S-0- S-00- S-0- SD-- SD-- SD-8- SR-- SR-00- SD--S- SD--S- SD-8-S- SR--S- SR-00-S- S--N- S-0-N- S-00-N- S-0-N- SD--N- SD--N- SD-8-N- SR--N- SR-00-N- SD--S-N- SD--S-N- SD-8-S-N- SR--S-N- SR-00-S-N- S--N- S-0-N- S-00-N- S-0-N- SD--N- SD--N- SD-8-N- SD--S-N- SD--S-N- SD-8-S-N- C-S-- C-S-0- C-S-00- C-S-0- C-SD-- C-SD-- C-SD-8- C-SR-- C-SR-00- C-SD-- C-SD-- C-SD-8- C-SR-- C-SR-00- C-S--N- C-S-0-N- C-S-00-N- C-S-0-N- C-SD--N- C-SD--N- C-SD-8-N- C-SR--N- C-SR-00-N- C-SD--N- C-SD--N- C-SD-8-N- C-SR--N- C-SR-00-N- C-S--N- C-S-0-N- C-S-00-N- C-S-0-N- C-SD--N- C-SD--N- C-SD-8-N- C-SD--N- C-SD--N- C-SD-8-N- R- KR-- KR-- RR- KR-- KR-- RR- GDM--- GDM--R--0 GDM--- GDM--R--0 GDML--- GDML--- GDML--- GDML--- GDML--- GDML--- GDML--- GDM--- GDM--R--0 GDM--- GDM--R--0 GDML--- GDML--- GDML--- GDML--- GDML--- GDML--- GDML--- erminl ox lug-in Connector lug-in Connector with Indictor Light Note: he connector ssemly is not included in the solenoid ssemly. DSG-0 Series Solenoid Operted Directionl Vlves