Logic Processing. Pneumatic

Transcription

1 neumtic Logic rocessing Modulr sequencer, inline/modulr logic elements, bus mounted elements, relys, electricl opertors, impulse-counters, timers Ctlogue No.: D0C 00029UK0ev

2 Logic rocessing Modulr sequencer Complete rnge tnd lone or stckble nd combinble modules Very fst response time Visul indictor Flexible nd highly mintinble system DIN ril mounting Operting informtion Working pressure 3 to 8 br Working temperture -5 C to 60 C Flow Generl Qmx80 Nl/min (cc. IO 6358) RD Qmx90 Nl/min R Qmx60 Nl/min tep modules Type ymbol Logic Description wivel push-in* Weight Order code D function connection Visul indiction With -2 subbse Ø4 mm 0,75 M-2 of pneumtic output nd mnul override Without With -2 subbse Ø4 mm 0,70 M-2 3 mnul override et of hed nd til modules Type ymbol Logic wivel push-in* Weight Order code D function connection R Ø6 mm push-in swivel Ø4 mm 0,080 E-2 connection Devition modules Type ymbol Logic wivel push-in* Weight Order code D function connection R Used for prllel-, optionl-, Ø4 mm 0,050 D-2 repet sequenses nd skip step for the remote reset of 0,050 D-2 3 the lst step module neumtic 2

3 Logic rocessing Modulr sequencer dditionl step module interlock Type ymbol Logic wivel push-in* Weight Order code D function connection My be mounted between Ø4 mm 0,045 V-2 3 the subbse nd the step module to interrupt the sequence if sensor is found to be fulty * For other type of connections contct Technicl les Deprtment tep module without subbse To be used with -2 subbses Type ymbol Logic Description Weight Order code D function Visul indiction With 0,35 M-0 of pneumtic mnul override output Without 0,30 M-0 3 mnul override tep module subbse Type Description wivel push-in* Weight Order code D connection ubbse Ø4 mm 0,040-2 * For other type of connections contct technicl sles Technicl les Deprtment Min dt for Line mounted elements Type ymbol Logic Description Connection* Weight Order code D function ND ingle module Ø4 mm 0,07 LL- tright push-in b OR ingle module Ø4 mm 0,07 LK- tright push-in b crew nd clip Enbles line mounted logic 0,02 ZM-L99 ssembly elements to be ttched to DIN ril (old per pck of 0) neumtic 3

4 Logic rocessing Logic elements Min dt for Combinble elements Type ymbol Logic Description Connection* Weight Order code D function b ND With buillt-in key for Ø4mm 0,08 LL-2 combintion nd operting wivel push-in mode selection b OR With buillt-in key for Ø4mm 0,08 LK-2 combintion nd operting wivel push-in mode selection b NOT With buillt-in key for Ø4mm 0,08 LN-2 combintion nd operting wivel push-in mode selection INUT With buillt-in key for Ø4mm 0,08 LE-2 combintion, clip for swivel push-in mountingon DIN ril nd blnkingplte for closing bnk of combined elements Min dt for ubbse mounted elements Type ymbol Logic Description Connection* Weight Order code D function (For use with 3 port subbse, type ZU plese see pge 3-4) ND With visul indiction 0,03 LL-C0 of pneumtic output signl OR With visul indiction 0,03 LK-C0 of pneumtic output signl NOT With visul indiction 0,03 LN-C0 inhibit of pneumtic input/output signl stndrd NOT With visul indiction 0,03 LN-D0 inhibit of pneumtic input/output signl threshold * For other type of connections contct Technicl les Deprtment neumtic 4

5 Logic rocessing ubbse nd Timers ubbse mounted elements Type ymbol Logic Description Connection* Weight Order code D function For subbse ZU E With visul indiction 0,03 LJ-C0 regenerte of pneumtic input/output signl 3-port subbses** With common Ø4 mm 0,04 ZU-2 input wivel push-in Cscde Ø4 mm 0,05 ZU-C2 wivel push-in 4-port subbses** For combintion with Ø4 mm 0,05 ZU-2 memory rely wivel push-in (see pge 3-5) nd mplifier rely (see pge 3-5) Input module Ø4 mm 0,05 ZU-E2 wivel push-in * For other type of connections contct Technicl les Deprtment ** Cn be used singly or in combintion. Mounting methods: On DIN ril with built in clip, on surfce mounting using screws M4x25 Min dt for time dely relys Type Function Timing Connection * Weight Order code D rnge Complete with ubbse ZU-2 Output fter 0, to 30 s Ø4 mm 0,7 RT-2 timed period wivel push-in Without subbse For subbse Output fter 0, to 3 s 0,3 RT-E0 ZU-2 or ZU-C2 t 0 timed period 0, to 30 s 0,3 RT-0 0 to 80 s 0,3 RT-0 t 0 Output during 0, to 3 s 0,3 RT-F0 timed period ** 0, to 30 s 0,3 RT-C0 0 to 80 s 0,3 RT-D0 Tmper proof cp 0,0 L9-D90 3 * For other type of connections contct Technicl les Deprtment ** Cn be used to provide n impulse genertor neumtic 5

6 Logic rocessing mplifiers nd sensor modules Min dt for Memory relys Type ymbol Description Connection* Weight Order code D Complete with subbse ZU-2 With priority reset signl Ø4 mm 0,9 LM-2 nd visull indiction wivel push-in With mnul override X Without subbse For subbse ZU-2 With priority reset signl 0, LM-0 nd visull indiction With mnul override X Without mnul override 0,3 LM-0 Min dt for mplifier relys Type ymbol Description Connection* Weight Order code D Complete with subbse ZU-2 This rely is used to mplify Ø4 mm 0,8 RD-2 3 the low pressure signl wivel push-in p provided by fluidic proximity sensor to useble level With mnul override Without subbse For subbse ZU-2 This rely is used to mplify 0,3 RD-0 the low pressure signl p provided by fluidic proximity sensor to useble level With mnul override Min dt for ensor relys Type ymbol Description Connection* Weight Order code D Complete with subbse ZU-2 This rely is used to supply Ø4 mm 0,07 RF-2 3 bleed sensor nd to generte wivel push-in pneumtic signl equl to its supply pressure Without subbse For subbse ZU-2 This rely is used to supply 0,03 RF-0 or ZU-C2 bleed sensor nd to generte pneumtic signl equl to its supply pressure * For other type of connections contct your Technicl les Deprtment neumtic 6

7 Logic rocessing Electro-modules Min dt for olenoid ctutors Type ymbol Voltge Lod Connection Weight Order code D Complete units, solenoid nd cble plug 24 V ~ 50/60 Hz 8,5 V Mnul mm 0,7 R-2 3 override lug-in 24 V 6 W Mnul mm 0,7 R- 3 override lug-in 5 V ~ 50 Hz 8,5 V Mnul mm 0,7 R-2F 3 20 V ~ 60 Hz override lug-in 230 V ~ 50 Hz 8,5 V Mnul mm 0,7 R-2M 240 V ~ 60 Hz override lug-in olenoid mounting bse For mounting the solenoid Mnul 0,09 R-D0 coil nd plunger on override 3-port modulr subbses type ZU-, see pge 3-4 olenoid coil with plunger nd 24 V* 6 W 0,35 V-F02 mm 48 V* 6 W 0,35 V-F02E 3 plug-in connector ** 24 V~ 50/60 Hz 8,5 V 0,35 V-F0 48 V~ 50/60 Hz 8,5 V 0,35 V-F0E 3 5 V~ 50 Hz/ 8,5 V 0,35 V-F0F 20 V~ 60 Hz 230 V~ 50 Hz 8,5 V 0,35 V-F0M 240 V~ 60 Hz 255 V~ 50 Hz 8,5 V 0,35 V-F0U 3 * Versions vilble for opertion in explosive tmospheres. - Conforming to certificte LCIE 8665X - Electricl equipment conforming to hrmonised Europen stndrds EN 500 dted Mrch 977 (NFC 235 dted My 982) EN 5009 dted Mrch 977 (NFC 2359 dted My 982) - Referencing code EExe ll T4 (consult Technicl les Deprtment) ** Cn be fitted with LED indictor nd suppression, V ZF Min dt for ressure switches Type ymbol Electricl neumtic Connection Weight Order code D chrcteristics chrcteristics Electric/neumtic Complete unit with subbse, solenoid nd cble plug N/O contct Mnul mm 0,3 RE-2 override lug-in Ø4 mm wivel push-in Without subbse N/O contct Mnul mm 0,04 RE-0 override lug-in Ø4 mm wivel push-in Line mounted CO contct Fixed operting Mnul Ø4 mm 0, /250 V threshold override ush-in CO contct djustble ope- Mnul Ø4 mm 0, /250 V rting threshold override ush-in neumtic 7

8 Logic rocessing Impulse counters nd timers Min dt for Impulse counters Type ymbol Type Counting rnge Mounting Weight Order code D Totlising counters X 0 neumtic or ufce mounting 0,08 CT- 3 mnul reset Flush mounting 0,06 CT- 3 re-selection counters Z 0 dditionl with Flush mounting 0,2 C- 3 pneumtic or mnul reset uto reset Flush mounting C- 3 Z 0 ubtrction with Flush mounting 0, C- 3 pneumtic or mnul reset Min dt for Timers Type ymbol Type Time bse Time rnge Weight Order code D Digitl disply X 0 With pneumtic or second second to 0,20 CM- 3 mnul reset 27 hours X mn 0 minute minute to 0,20 CM dys 2 minute 3 to 00 minutes 0,20 CM-E 3 Clibrted dil 2 second 2 to 30 seconds 0,05 CM-F 3 t second 20 to 300 0,05 CM-G 3 seconds neumtic 8

9 Logic rocessing ccessories Mounting bezels Type Description Weight Order code D For CM-F nd CM-G 0,05 XC-ZM mounting in 60 x 75 mm cut-out For CM-F nd CM-G 0,05 XC-ZM mounting in 72 x 72 mm cut-out ezels for DIN ril mounting Type Description Weight Order code D For (non-reversible) clip-on mounting of 0,020 XC-Z35 3 CM-F nd CM-G on push-in connection subbse 35 mm DIN ril ltching device 0,00 XC-ZE35 3 for XC-Z35 subbses Lockble cover Degree of protection I 55 Type Description Weight Order code D Trnsprent cover key lockble 0,025 XC- 3 for 60x75 bezel for C-, C-, C-M, C-M For CT- 0,08 XC- 3 neumtic 9

10 Logic rocessing Dimensions, Logic processing Modulr sequencer M- 2 D-2 D-2 E-2 M-0 E-2 V- 0 M R R , ,5 Ø6 mm push-in connections Ø4 mm push-in connections 5 70,5 48, ,5 48,5 Line mounted logic elements LL- nd LK- ZM-L99 vis M Ø4, DIN ril Combinble logic elements LE-2 LL-2 LK-2 nd LN-2 7 Clip ressure indictor 28 8 Clip 40 Ø4,2 26 6,5 5 6 Ø4 mm push-in connections Logic elements mounted on 3-port modulr subbses ZU-E2 LJ-C0 LN-C0 LK-C0 nd LL-C0 mounted on ZU-C2 nd ZU LJ- C0 LN- C0 LK- C0 LL- C ZU- E2 ZU- C2 ZU- C ZU- 2 ZU DIN ril neumtic 0

11 Logic rocessing 3 nd 4-port modulr subbses ZU-E2 ZU-C2 ZU-2 ZU-2 Ø4,2 5 0 Ø4, Clip 5 Relys mounted on 3-port modulr subbses RT-2 RF-2 RE-2 R-2 nd LN-D DIN ril 97 RT-2 RF-2 RE-2 R-2. LN-D Relys mounted on 4-port modulr subbses LM-2 nd RD ressure switch -09 DIN ril 77,5 7,57,5 n. modules7,5 40,5 Ø3 mm djusting screw neumtic

12 Logic rocessing Totlising counters CT- CT XØ4 reselection counters C- nd C- 2XØ4,5 2XØ4, Z , , () Ø4 Connexions mm push- instntnées Ø4 mm connections Z , ,5 32,5 62,5 60 Digitl disply timers CM- nd CM- Connexions Ø4 mm push- instntnées Ø4 mm in connections 2XØ4,5 X , Ø4 mm push- in connections 3,5 32,5 48 5,5 60 Timers with clibrted dil CM-F nd CM-G 60 3,9 27,2 2 mx., ,6 58,6 6 2,8 24 2,5 7,8 Connexions Ø4 mm push- instntnées Ø 4 mm in connections 0,4 neumtic 2

13 ervice nd Replcement rts neumtic Logic rocessing No internl components vilble, replce complete element or bse pre rt Kits rt Number Description Quntity per Kit R-L0 Interfce sels, step sequencer/ bse 0 sels R-L02 Interfce sels, elements/ 4 port sub-bse 0 sels R-L05 lugs for 3 or 4 port sub-bses 50 plugs R-L06 Combintion key for combinble elements 50 keys R-L07 Combintion key for modulr sub-bses 50 keys R-L08 Diphrgm for mplifier rely 0 diphrgms R-L09 Hed Til set DIN ril retiners 20 sets R-L0 osition selector for combinble elements 50 selectors R-L Interfce sels for step sequencer nd combinble elements 00 O ring sels