AP Series Industrial Pushbutton Switch

Transcription

1 P Series Features/Benefits IP67 sealed 1,000,000 life cycle Illumination / non-illumination Multiple colored caps Threaded or snap-in mounting Caps available separately RoHS compliant Typical pplications Harsh environments Off-Road Industrial Medical Transportation Joystick control modules Gaming Military Specifications FUNCTION: SPST Momentary CONTCT RRNGEMENT: N.O. MOUNTING E: Snap-in (no panel seal) Threaded body (hex nut, lock washer, and panel seal gasket provided) Torque spec for threaded body: Do not exceed 8-9 in-lbs ( N.m) Mechanical OPERTING LIFE: 1,000,000 cycles TOTL TRVEL: 2.1 ± 0.2 mm OPERTING POINT 1.55 ± 0.25 mm OVER TRVEL: 0.6 min. OPERTING FORCE: 4N ± 1N standard configuration; other force option 2N ± 0.5N VIBRTION: Hz 10g Max SHOCK: 60g 11ms sawtooth wave Electrical CONTCT RTING: 24 V DC resistive (500,000 cycles) 50 V DC resistive (500,000 cycles) 32 V C resistive (500,000 cycles) 125 V C resistive (1,000,000 cycles) DIELECTRIC STRENGTH: 1000 V C min. INSULTION RESISTNCE: 1 G 500 VDC INITIL CONTCT RESISTNCE 50 mω max (without wire leads) BOUNCE TIME: <5 ms Materials HOUSING: PBT BSE: PBT CP: PBT CTUTOR: Illuminated: Clear polycarbonate Non-illuminated: PBT INTERNL SEL: Silicone rubber TERMINLS: Copper alloy, gold over silver plating MOVBLE CONTCT: Copper alloy, gold over silver plating TERMINL SEL: Epoxy WIRE LEDS: UL1569 Black 22 WG Operating Environment OPERTING TEMPERTURE: -40 C to 85 C (+105 C non-illuminated) ESD PROTECTION: 20 KV min. Process Environment SELING: IP67 for threaded body IP65 for snap-in version (no panel seal) Build--Switch To order, simply select desired option from each category and place in the appropriate box. NOTE: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, please contact Customer Service. P B E Designation P P Series Operating Force 2 2 Newtons 4 4 Newtons ctuator Style D Dome / Convex C Concave E Extended Dome N None Please contact Customer Service for additional colors and paint / laser etched button options. ctuator Color 0 No Cap 2 Black 3 Red 4 Orange 5 Yellow 6 Green 7 Blue 9 Gray Illumination 00 No LED* 01 Super White 02 Bi-color; Red (Green) 03 Red 05 mber 06 Green 07 Super Blue 08 Bi-color; mber (Green) * No LED available in short body only -108 Terminal Seal E Epoxy ll models are epoxy sealed Contact Material B Gold Termination Z Solder Lug W 12 Wire Leads 22 WG C*** PC Terminals Bushing Style** S** Snap-in plastic T Threaded plastic ** No panel seal option *** PC terminals not available with illumination Contact Customer Service for additional hardware options.

2 P Series ø 17,40 [0.685] ø 12,35 [0.486] 4,20 [ ] 28,00 [ ] 1,50 [ ] STNDRD VIEW 10,90 [ ] 3,90 [ ] 8,80 [ ] ELECTRICL SCHEMTIC ,50 [ ] 5,45 [ ] SPST-NO SEE SCHEMTIC OPERTING FORCE OPERTING FORCE 2 2 N, 200 g 4 4 N, 400 g CTUTOR STYLE D DOME / CONVEX E EXTENDED DOME C CONCVE 3,54 [ ] 3,54 [ ] 0,65 [ ] 8,19 [ ] 3,99 [ ] 1,64 [ ] 1,64 [ ] 2,09 [ ] DOWN POSITION CTUTOR COLOR CTUTOR COLOR 0 No Cap 2 Black 3 Red 4 Orange 5 Yellow 6 Green 7 Blue 9 Gray For additional colors please contact Customer Service. Third ngle Dimensions are shown: mm (inches -109

3 P Series ILLUMINTION ILLUMINTION E 00 Model without illumination 01 LED Super White 02 LED Bi-Color Red (Green) 03 LED Red 05 LED mber ICL INTENSITY* MIN MX (mcd) N/ 4,000 5, PEK WVELENGTH (nm) N/ N/ 635/ Vf Forward Voltage LED Green LED Super Blue 800 1, LED Bi-Color mber (Green) /565 *LED FORWRD CURRENT: 20 m LED FORWRD VOLTGE: see chart above LED REVERSE VOLTGE: 5.0 V MX * For information on specific and custom LED, please contact Customer Service. NOTE: For bi-color LED s the polarity must be reversed to alternate the color + node - Cathode 3 4 BUSHING STYLE S SNP-IN 28,00 [ ] 20,25 [ ] 7,75 24,00 [ ] 16,25 [ ] SNP-IN WITH ILLUMINTION 1,50 [ ] SNP-IN NO ILLUMINTION 1,50 [ ] T THREDED PLSTIC M13 X g M13 X g THREDED WITH ILLUMINTION 0,85 [ ] THREDED NO ILLUMINTION 0,85 [ ] PNEL CUTOUT ø B PNEL THICKNESS DIM (± 0.05 mm) DIM B (± 0.05 mm) 1 mm [0.039 in] 2 mm [0.079 in] 3 mm [0.118 in] THREDED BODY MIN PNEL THICKNESS 1 mm mm [0.539 in] mm [0.539 in] mm [0.547 in] mm [0.539 in] mm [0.512 in] mm [0.512 in] mm [0.516 in] mm [0.512 in] Third ngle 0.1mm min. chamfer on the leading edge of the mounting hole is recommended for snap-in version Dimensions are shown: mm (inches)

4 Z SOLDER LUG 0,50 [0.020] 2,83 [0.111] 3,90 [0.154] TERMINTION P Series LED TERMINL NODE (+) 6,44 [0.254] 2,83 [0.111] 2,75 [0.108] LED TERMINL CTHODE (-) 0,75 [0.030] 0,50 [0.020] LED TERMINL NODE (+) 2,04 [0.080] * Switching terminals are gold and LED terminals are silver LED TERMINL CTHODE (-) C PC TERMINLS 5,65 [0.222] *** Illumination not available with PC Terminals 2,50 [0.098] 0,50 [0.020] 0,70 [0.028] 5,65 [0.222] 5,70 [0.224] 2X ø 1,00 [0.039] PCB HOLE PTTERN BORD VIEW W 12 WIRE LEDS 22 WG 34,78 [1.369] 27,04 [1.065] 28,44 [1.120] 20,69 [0.815] WIRE LEDS WITH POTTED BSE, SNP-IN ILLUMINTION ø 11,11 [0.437] [100] WIRELEDS 22 WG STD WIRE LEDS WITH POTTED BSE, SNP-IN NO ILLUMINTION ø 11,11 [0.437] [100] WIRELEDS 22 WG STD WIRE LEDS WITH POTTED BSE, THREDED ILLUMINTION Wires: Black wires - Terminals Red wires - LED (+) Positive White wire - LED (-) Negative [100] WIRELEDS 22 WG STD WIRE LEDS WITH POTTED BSE, THREDED NO ILLUMINTION [100] WIRELEDS 22 WG STD Third ngle -111 Dimensions are shown: mm (inches

5 P Series B GOLD E EPOXY ll models are epoxy sealed CONTCT MTERIL B CONTCT MTERIL Gold TERMINL SEL HRDWRE LOCK WSHER Part Number 647D00000 ø17.25 HEX NUT Part number 515D REF ø15.90 M13 X H PNEL SEL Part Number 655D X See Detail 4X R 0.13 REF 0.56 REF Detail Scale 15:1 ø X ø X ø ø Caps available on next page Third ngle -112 Dimensions are shown: mm (inches)

6 VILBLE CPS P Series 481D Cap Color Style XX XXX CP COLOR 01 WHITE 02 BLCK 03 RED 04 ORNGE 05 YELLOW 06 GREEN 07 BLUE 08 BROWN 09 GRY PRT NUMBER HOLE STYLE 481DXX000 NO DOME 481DXX001 YES DOME 481DXX002 NO EXTENDED DOME 481DXX003 YES EXTENDED DOME 481DXX004 NO CONCVE 481DXX005 YES CONCVE DOME ø ø 3.00 THRU HOLE 481DXX000 = NO HOLE 481DXX001 = HOLE EXTENDED DOME ø12.35 ø 3.00 THRU HOLE 481DXX002 = NO HOLE 481DXX003 = HOLE CONCVE 481DXX004 = NO HOLE 481DXX005 = HOLE ø ø 3.00 THRU HOLE Third ngle -113 Dimensions are shown: mm (inches)