Denotes New Winner s Circle Product Line. Catalog HY /US SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO. LPM/GPM BAR/PSI HIGH FLOW VALVE FAMILY

Transcription

1 Catalog HY-5/US Contents SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO. /GPM BAR/PSI HIGH FLOW VALVE FAMILY See individual catalog pages for exact specifications. WAY SPOOL TYPE GS *... X / C9-.. Position, Way, N.C. Spool...19/5... 5/ GS 7*... X / C9-.. Position, Way, N.O. Spool...19/5... 5/ *These valves fit the C9- Parker cavity. WAY, POSITION SPOOL TYPE GS... C-... Position, Way...19/5... 5/ s & WAY POPPET TYPE DSL1... C-... Position, Way, N.C. or N.O..../... 5/ D1... C-... Position, Way, N.C. or N.O..../... 5/ DSL11... C1-... Position, Way, N.C. or N.O....6/... 5/ D11... C1-... Position, Way, N.C. or N.O....6/... 5/ D11... C1-... Position, Way, N.C. or N.O....9/... 5/ DS C Position, Way, N.C. or N.O..../... 1/... - D161*... C Position, Way, N.C. or N.O..../... 5/ DS1... C-... Position, Way, N.C. or N.O....6/7... 1/ DSL1*... C-... Position, Way, N.C. or N.O....6/7... 5/ *The D161 and DSL1 will be available January 1, 11 GH 1... C-... Position, Way, N.C., with Adj...11/... 5/ GS 7/7... C-... Bi- Poppet, N.C / /... - GS */1... C-... Bi- Poppet, N.C....5/... 5/ GS */1... R... Bi- Poppet, N.C....76/... 5/ GS6 */1... C Bi- Poppet, N.C....5/ / GS 77/7... C-... Bi- Poppet, N.O...1.7/ / GS 5*/6... C-... Bi- Poppet, N.O...5/... 5/ GS 5*/6... R... Bi- Poppet, N.O...76/... 5/ GS6 5*/6... C Bi- Poppet, N.O...5/ / *1/ psi rating Bodies & Denotes New Winner s Circle Product Line.

2 Bodies & Catalog HY-5/US Contents SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO. /GPM BAR/PSI WAY SPOOL TYPE DSL... C-... Position, Way.../... 5/ D... C-... Position, Way.../... 5/ DSL1... C1-... Position, Way.../... 5/ D1... C1-... Position, Way.../... 5/ DS16... C Position, Way...75/... 1/ WAY SPOOL TYPE DSL... C-... Position, Way.../... 5/ D... C-... Position, Way.../... 5/ DSL1... C1-... Position, Way.../... 5/ D1... C1-... Position, Way.../... 5/ DS16... C Position, Way...57/... 1/ WAY, POSITION SPOOL TYPE DSL... C-... Position, Way.../... 5/ D... C-... Position, Way.../... 5/ DSL1... C1-... Position, Way.../... 5/ D1... C1-... Position, Way.../... 5/ D16... C Position, Way...11/... 5/ WAY, POSITION SPOOL TYPE GS C-... Position, Way...17/ / GS 5... C-... Position, Way.../... 5/ GS C-... Position, Way...1/ / GS C-... Position, Way...1/ / DSL... C1-... Position, Way...19/5... 5/ GS 5D... C1-... Position, Way.../... 5/ GS 5D... C1-... Position, Way.../1... 5/ GS 57D... C1-... Position, Way.../ / GS 59D... C1-... Position, Way.../ / s & D 5... C1-L... Position, Way...57/... 5/ D 5... C1-L... Position, Way...57/... 5/ D C1-L... Position, Way...57/... 5/ D C1-L... Position, Way...57/... 5/ Denotes New Winner s Circle Product Line.

3 Catalog HY-5/US Tips INTRODUCTION This technical tips section is designed to help familiarize you with the Parker line of. In this section we highlight new products to this catalog as well as some design features of our solenoid valves. In addition we present common options available to help you in selecting products for your application. Finally, we give a brief synopsis of the operation and applications of the various products offered in this section. Some tips in applying and selecting our products are provided throughout this guide. NEW PRODUCTS There are several new additions and product improvements to our Valve product line. Here are just some of the design features and advantages to the product line. *Nylon Insert Nut Nylon inserted jam nut resists vibration preventing the nut from backing out. *Used only on D/DSL series. Crimp Design Fold over crimp provides secure holding and eliminates the need for adhesive. New Super Exceeds IP69K specifications with Deutsch molded connector or LS sealed lead wire assemblies. D -Ring Standard 1 Polyurethane Seal eliminates the need for backup rings providing easier manifold installation. (For more information on D -Ring see Section) s & Bodies & New Parker SUPER COIL Now Available! *Exceeds IP69k Specifications After exhaustive testing, the new Super has clearly distanced itself from the competition. This coil was subjected to the rigors of this environmental standard and the results were excellent. This coil stands up to most rugged of environmental conditions including weather, dust, and extreme temperature variations. *Water Dunk Test Qualified The Super was taken to task in a repeated water dunk thermal cycle test program with alternate exposure to high and low temperature, only to perform with outstanding results. *Endurance Tested The goal of this test was to cycle the coil to high temperature extremes in order to validate the coils ability to perform in extreme temperature environments. *Water Spray and Chemical Solvent Compatibility The Super was subjected to numerous chemical solvents in a rigorous test which established the fact that these coils can withstand harsh and unusual environments. Also, the coils were subjected to a high pressure water spray test. Once again, the Super passed this test. *Deutsch molded connector or LS option is highly recommended. NOTE: LS coil option will be available January 1, 11. 1

4 Bodies & Catalog HY-5/US Tips COMMON OPTIONS As you will see, Parker offers a variety of solenoid valve products. As such, some of the options mentioned below may not be available on all valves. Consult the model coding and dimensions for each valve for more specifics. Here are some of the common options available. Seals: The Winner s Circle products feature a standard Polyurethane D -Ring. The D -Ring eliminates the need for backup rings. For more information on the D -Ring see the section of the catalog. The majority of the products are available in Nitrile or Fluorocarbon Seals. You should always match the seal compatibility to the temperature and fluid being used in your application. s: s can be ordered as part of the full assembly or separately. Various terminations and voltages are available. For detailed information on the coil options consult the coil section of the catalog. The ordering information for each valve will direct you to the proper coil. Overrides: Many of our solenoid valves are also offered with a manual override. The override allows the user to shift the valve when coil force is not available. They provide a means of shifting the solenoid valve due to a loss of power or a coil failure. Overrides are intended for infrequent usage and are not designed to be used as a primary method of valve actuation. down on the knob and twists is clockwise. Once the pin is seated in the slotted groove, the operator can remove pressure and the valve will stay actuated. In addition to the push and twist style override, normally closed (pull style tube) position valves can be ordered with a pull and release override. Normally open (push style) position valves are available with flush style and extended style overrides. These overrides are not detented. Each style is shown below. 9.9 (1.1) Normal. (1.5) Shifted Pull and Release Override 1.1 (.5) Flush Override.1 (.7) Extended Override Position valves are offered with a Push / Pull style override. This override is not detented. Springs hold the spool of the valve in the center position of the valve. When the knob is pulled, the spool is moved upward simulating the action of the upper coil. When the override is pushed, the spool moves downward simulating the action of the lower coil. When no pressure is applied to the knob, it centers the spool. The most common override option for the Position valves is the push & twist style shown below. With a normally closed valve or a pull style tube, the valve is in normal operation (or de-energized) when the pin is seated in the slotted groove at the lowest position. To shift the valve manually, the operator pushes down on the knob and twists it counterclockwise. When the pressure is removed from the knob, an internal spring pushes the pin up the slotted groove to the upper position of the override. With a normally open valve, or push style tube, the actuation is reversed. The valve is in the normal position (or de-energized) when the pin is in the upper position of the override. To shift the valve manually, the operator pushes 9.7 (1.17) Normal. (1.5) Normal Normally Closed Pull Type Tube Normally Open Push Type Tube. (1.5) Shifted.6 (1.) Shifted Push Position.6 (1.1) Normal Position 1.5 (1.) Pull Position.5 (1.6) Screens: way valves can be ordered with a small mesh screen (6 x 6 mesh) placed over the cage of the cartridge valve. This screen is intended for cursory protection of the internal components of the solenoid valve. It should not be used as the primary method of filtration. The mesh catches small pieces of debris that could impede spool or poppet movement. Note that a screen will trap debris from both directions. Thus, any debris coming from the nose of the cartridge would be trapped inside the valve. As such, we recommend that screens be implemented in only applications where hydraulic fluid passes through the cartridge from the side of the cage to the nose. It should also be noted that the pressure drop through the cartridge will be increased slightly due to the small restriction of the mesh. As the screen fills with debris, pressure drop will continue to rise. s &

5 s & Catalog HY-5/US Tips PRODUCT TYPES / APPLICATIONS Two Way Poppet Two way poppet valves are pilot operated, low leakage solenoid actuated valves. Two way poppet valves control the flow of a two way function by blocking flow in one direction (similar to a check valve). They are generally selected due to their low leakage and ability to meet higher flow requirements. Poppet valves are often used on single operation actuators or in unloading functions. They are available in normally closed and normally open types. In addition, free reverse flow and fast response versions are available. Normally Closed Poppet Normally closed two way poppet valves act as a check valve when de-energized, blocking flow from one direction and allowing restricted free flow in the reverse condition. When energized, the poppet lifts allowing free flow from the side to the nose of the cartridge. Should the application require free flow in both directions, the free reverse flow option should be chosen. OPERATION - The valve pilot is held on its seat by spring force, blocking pilot flow. This allows pressure at the inlet (port ) to hold the poppet on its seat, thus, preventing flow through the valve (-1). If the nose of the cartridge (port 1) is pressurized, the pressure will overcome the spring force, pushing the poppet off of its seat, allowing free flow through the cartridge (1-). When the coil is energized, the valve pilot is pulled off of its seat. This vents the pressure inside the poppet to port 1, creating a pressure imbalance across the main poppet. This differential lifts the poppet allowing flow from the side to nose (-1). Since poppet valves are piloted operated, a minimum amount of pressure differential (5-5 psi) and flow between ports and 1 must be present to overcome the spring and lift the poppet. Normally Open Poppet Normally open two way poppet valves, when de-energized, allow free flow from the side (port ) of the cartridge to the nose (port 1). in the reverse direction is restricted. Should free flow be required in both directions, the free reverse flow option should be specified. Once the coil is energized the normally open poppet valve acts as a check valve, blocking flow from one direction and allowing restricted free flow in the reverse condition. OPERATION - The valve pilot is held off its seat by spring force. Pilot flow is vented to port 1, creating a pressure imbalance that moves the main poppet. This differential lifts the poppet allowing flow from the side to nose (-1). Since poppet valves are piloted operated, a minimum amount of pressure differential (5-5 psi) between ports and 1 must be present to overcome the spring and lift the poppet. When the coil is energized, the coil force overcomes the spring force to drive the valve pilot and main poppet into their seats, thus blocking flow from port -1. If the nose of the cartridge (port 1) is pressurized, the pressure will overcome the spring force and solenoid force, pushing the poppet off of its seat, allowing restricted flow through the cartridge (1-). Out Out In In Bodies &

6 Bodies & Catalog HY-5/US Tips Free Reverse The free reverse flow versions are available on both the normally closed and normally open poppet valves. As mentioned above, the operation is the same as the standard poppet valve except flow through the reverse direction is not restricted. The free reverse flow option is only needed if the application requires flow to pass through the cartridge valve from the nose to side (port 1 to port ). Fast Response Since poppet valves are pilot operated valves, a few milliseconds are needed to move the pilot and allow the poppet to lift. Should a faster response time be required on normally closed poppet valves, this option can be chosen. The fast response is accomplished by reducing the movement of the pilot. Thus, the flow capacity of the poppet valve is also decreased. Out Out In In Two Way Spool Two way spool valves are direct acting, fast responding solenoid actuated valves. Like the poppet valves described earlier, they block the flow of a two way function. Unlike two way poppet valves, spool valves block flow from both the side port and the nose port. They do not have the check like function of the poppet valve, thus they are either open or closed. Spool valves are directed operated, so they respond more quickly to coil voltage than poppet valves. Spool valves operate via a sliding spool, thus, some leakage will be present due to the required spool clearance. Spool valves block flow in both directions, but the preferred flow path is still from the side of the cartridge to the nose due to the flow forces acting on the spool. Two way spool valves are available in normally open and normally closed types. Normally Closed Spool When de-energized, the spool is positioned by the spring force to cover both the side and nose ports of the valve. Thus, no flow is allowed from either direction. Once the coil is energized, the spool shifts exposing a flow path between the two ports. can then be passed through the valve from either direction. Normally Open Spool When de-energized, the spool is positioned by the spring force so that a flow path between the side and nose ports is exposed, allowing flow through the valve from either direction. Once the coil is energized, the spool shifts to cover both the side and nose ports of the valve. Thus, no flow is allowed from either direction. Out Out In In s &

7 s & Catalog HY-5/US Tips Bi- Poppet Valve Bi-directional poppet valves combine the dual blocking function of spool valves with the lower leakage capabilities of poppet valves. These valves also have a limited flow capacity compared to standard poppet or spool valves. Two Position, Three Way Spool Valve Three way spool solenoid valves provide directional control of flow. Each three way valve has a special internal spool which connects two of the three valve ports. When actuated, the spool connects a different combination of valve ports. These valves are often used for raise and lower functions of a single acting cylinder, control of a uni-directional motor, or as a circuit selector. OPERATION - In the de-energized mode, the spool is positioned by spring force. When energized, the coil force directly shifts the spool against the spring, thus changing the flow through the valve. Each spool type can be used as a normally open, normally closed, or selector valve. To explain this we will review the DSL1A which is pictured here. When the valve is de-energized, ports 1 and are open to one another. When energized, ports 1 and are connected. Thus, if we use port as our pressure port, we have a normally closed valve. The pressure port is blocked, while the actuator port is drained to tank. If we use port as our pressure port, we have a normally open valve. The pressure port is connected to the actuator port, and the tank port is blocked. If we use port 1 as our pressure port, we have a selector valve. The pressure port is either connected to port or port. Thus, it is selecting which port will get the system pressure and flow. Note that in all three examples, we were using the same valve. The flow forces acting on the spool change depending on which port is pressurized. Thus, if you will be shifting the three way valve under full flow and pressure, it is important to review the shift limit characteristics for the flow paths you have chosen to be sure the coil has enough force to shift the spool. Various spools are available in this catalog to maximize the flow and pressure capacities for the desired flow function. Bodies & 5

8 Bodies & Catalog HY-5/US Tips Two Position, Four Way Spool Valve Four way spool solenoid valves provide directional control of flow. Each four way valve has a special internal spool which connects some combination of the four valve ports together. When actuated, the spool connects a different combination of valve ports. These valves are often used for the raise / lower function of a double acting cylinder, or as a forward / reverse function of bi-directional motors. OPERATION - In the de-energized mode, the spool is positioned by spring force. When energized, the coil force directly shifts the spool against the spring, thus changing the flow through the valve. Each spool type is customized to provide the flow combination desired. The flow forces acting on the spool change depending on which port is pressurized. Thus, if you will be shifting the four way valve under full flow and pressure, it is important to review the shift limit characteristics for the flow paths you have chosen to ensure the coil has enough force to shift the spool. Various spools are shown in this catalog to maximize the flow and pressure capacities for the desired flow function. () Three Position, Four Way Spool Valve Three position, four way spool solenoid valves provide directional control of flow. Each four way valve has a special internal spool which connects some combination of the four ports together. When one coil is actuated, the spool connects a different combination of valve ports. When the other coil is actuated a () third combination of valve ports are connected. These valves are often used for the raise / lower function of a double acting cylinder, or as a forward / reverse function of bi-directional motors. The center position can be used to stop the actuator in mid-stroke, or dump the pump flow. OPERATION - In the de-energized mode, the spool is positioned by spring force. When energized, the coil force directly shifts the against the spring, thus changing the flow through the valve. Each spool type is customized to provide the flow combination desired. The flow forces acting on the spool change depending on which port is pressurized. Thus, if you will be shifting the four way valve under full flow and pressure, it is important to review the shift limit characteristics for the flow paths you chosen to ensure the coil has enough force to shift the spool. Various spools are shown in this catalog to maximize the flow and pressure capacities for the desired flow function. s & 6

9 Catalog HY-5/US Information General Description -Way, Position, Normally Closed Spool Valve. For additional information see Tips on pages 1-6. Spool Type, -Way Valve Series GS Features High flow capacity One piece cartridge housing ensures internal concentricity : Waterproof, hermetically sealed, requires no O Rings; Symmetrical coil can be reversed without affecting performance. s & Bodies & Specifications Rated (At 7 PSI P) Maximum Inlet Leakage at SSU ( cst) Minimum Operating Voltage Cartridge Material Operating Temp. Range/Seals Fluid Compatibility/ Viscosity 1 (.5 GPM) 5 Bar (5 PSI) 1 Bar ( PSI) 5% of rated voltage at C (7 F). All parts steel. All operating parts hardened steel. - C to +9. C (Nitrile) (- F to + F) -1.7 C to C (Fluorocarbon) (-5 F to +5 F) Mineral-based or synthetic with lubricating properties at viscosities of 5 to SSU (6 to cst) Filtration ISO Code 16/1, SAE Class or better Approx. Weight.1 kg (.1 lbs.) Cavity C9- (See Section for more details) Performance Curves Drop vs. (Through cartridge only) Hydraulic Oil 1 F ( cst) Drop Opreating Limits (Measured at 75% of Nominal Current) Hydraulic Oil 1 F ( cst) GPM GPM 7. 1 Reduce By 1% For Override to to

10 Bodies & Catalog HY-5/US Information Dimensions Millimeters (Inches) Spool Type, -Way Valve Series GS.6 (.) Override Option (Push to Operate) Detented Override Option (Screw to Operate) 6.7 (.7) 19. (.7) / Hex..1 Nm ( lb. ft.) 5. (.1). (1.) 91.5 (.6) 9.6 (1.56) 16. (.6). (1.1) PAT.55 MADEINU.S.A. XXV XXW CCX XXX H See Super 1/" I.D. Information For Terminal Connectors 7/ Hex. Nm ( lb. ft.) /-16 UNF Thread.9 (.6) s & Ordering Information GS THIRD-ANG PROJECTION 9 Size Valve Code Style High ( SP ) Code Screen None Style Normally Closed Code Override Options None 1 Override Detented Part No. 969 Override Option Screen Seals Code Seals / Kit No. N Nitrile / Buna-N (Std.) (SK76N-1) V Fluorocarbon / (SK76V-1) Code Type Omit Without SP Super - 19 Watts Code Voltage Omit Without D1 1 V D V A1 1 VAC, 6/5 Hz A VAC, 6/5 Hz* * Watts Type Voltage Code Termination Omit Without C Conduit With Leads D DIN Plug Face A Amp Jr. Timer* S Dual Spade* L Dual Lead Wire* LS Sealed Lead Wire* H Molded Deutsch* See Super 1/ I.D. * Only Termination Body Material Port Size Code Body Material Omit Steel A Aluminum Code Port Size Body Part No. Omit Cartridge Only 6T SAE-6 (B9--*6T) 6B / BSPG (B9--6B) * Add A for aluminum, omit for steel. Steel body only.

11 Catalog HY-5/US Information General Description -Way, Position, Normally Open Spool Valve. For additional information see Tips on pages 1-6. Spool Type, -Way Valve Series GS 7 Features High flow capacity One piece cartridge housing ensures internal concentricity : Waterproof, hermetically sealed, requires no O Rings; Symmetrical coil can be reversed without affecting performance. s & Bodies & Specifications Rated (At 7 PSI P) Maximum Inlet Leakage at SSU ( cst) Minimum Operating Voltage Cartridge Material Operating Temp. Range/Seals Fluid Compatibility/ Viscosity ( GPM) 5 Bar (5 PSI) 1 Bar ( PSI) 5% of rated voltage at C (7 F). All parts steel. All operating parts hardened steel. - C to +9. C (Nitrile) (- F to + F) -1.7 C to C (Fluorocarbon) (-5 F to +5 F) Mineral-based or synthetic with lubricating properties at viscosities of 5 to SSU (6 to cst) Filtration ISO Code 16/1, SAE Class or better Approx. Weight.1 kg (.1 lbs.) Cavity C9- (See Section for more details) Performance Curves Drop vs. (Through cartridge only) Hydraulic Oil 1 F ( cst) Drop Opreating Limits (Measured at 75% of Nominal Current) Hydraulic Oil 1 F ( cst) GPM GPM 7. 1 Reduce By 1% For Override to to

12 Bodies & Catalog HY-5/US Information Dimensions Millimeters (Inches) Spool Type, -Way Valve Series GS 7.6 (.) Override Option (Push to Operate) Detented Override Option (Screw to Operate) 6.7 (.7) 19. (.7) / Hex..1 Nm ( lb. ft.) 5. (.1). (1.) 91.5 (.6) 9.6 (1.56) 16. (.6). (1.1) PAT.55 MADEINU.S.A.. (.6) XXV XXW CCX XXX H See Super 1/" I.D. Information For Terminal Connectors 7/ Hex. Nm ( lb. ft.) /-16 UNF Thread s & Ordering Information GS 7 THIRD-ANG PROJECTION 9 Size Valve Code Style 7 High ( SP ) Code Screen None Style Normally Open Code Override Options None 1 Override Detented Part No. 969 Override Option Screen Seals Code Seals / Kit No. N Nitrile / Buna-N (Std.) (SK76N-1) V Fluorocarbon / (SK76V-1) Code Type Omit Without SP Super - 19 Watts Code Voltage Omit Without D1 1 V D V A1 1 VAC, 6/5 Hz A VAC, 6/5 Hz* * Watts Type Voltage Code Termination Omit Without C Conduit With Leads D DIN Plug Face A Amp Jr. Timer* S Dual Spade* L Dual Lead Wire* LS Sealed Lead Wire* H Molded Deutsch* See Super 1/ I.D. * Only Termination Body Material Port Size Code Body Material Omit Steel A Aluminum Code Port Size Body Part No. Omit Cartridge Only 6T SAE-6 (B9--*6T) 6B / BSPG (B9--6B) * Add A for aluminum, omit for steel. Steel body only. 1

13 Catalog HY-5/US Information Spool Type, -Way Valve Series GS General Description -Way, Position, Reversing Spool Valve. For additional information see Tips on pages 1-6. Features Designed to operate double and single acting cylinders, pilot circuits and bi-directional motors, etc. High flow capacity with reduced space requirements High pressure capacity to 5 Bar (5 PSI) One piece cartridge housing ensures internal concentricity : Waterproof, hermetically sealed, requires no O Rings; Symmetrical coil can be reversed without affecting performance. override available () () s & Bodies & Specifications Rated (At 7 PSI P) Maximum Inlet Leakage at SSU ( cst) Minimum Operating Voltage Cartridge Material Operating Temp. Range/Seals Fluid Compatibility/ Viscosity 19 (5 GPM) 5 Bar (5 PSI) 5% of rated voltage at C (7 F). All parts steel. All operating parts hardened steel. - C to +9. C (Nitrile) (- F to + F) -1.7 C to C (Fluorocarbon) (-5 F to +5 F) Mineral-based or synthetic with lubricating properties at viscosities of 5 to SSU (6 to cst) Filtration ISO Code 16/1, SAE Class or better Approx. Weight. kg (.66 lbs.) Cavity C- (See Section for more details) Performance Curves Drop vs. (Through cartridge only) Hydraulic Oil 1 F ( cst) Drop GPM GPM Opreating Limits (Measured at 75% of Nominal Current) Hydraulic Oil 1 F ( cst)

14 Bodies & Catalog HY-5/US Information Dimensions Millimeters (Inches) Spool Type, -Way Valve Series GS.6 (.) Override Option (Push to Operate) Detented Override Option (Screw to Operate) 6.7 (.7) 19. (.7) 11. (.76) 9.6 (1.56). (.6) PAT.XXXXXXX MADEINU.S.A. 5.1 (.9) XXV XXW CCX XXX H / Hex..1 Nm ( lb. ft.) See Super 1/" I.D. Information For Terminal Connectors 7/ Hex. Nm ( lb. ft.) /-16 UNF Thread s & 5. (.1). (1.) 1.7 (.5) THIRD-ANG PROJECTION Ordering Information GS Size Valve Style Override Option Screen Seals Type Voltage Termination Body Material Port Size Code Style High ( SP ) Code Override Options None 1 Override Detented Part No. 969 Code Screen Not Available Code Seals / Kit No. N Nitrile / Buna-N (Std.) (SK7N-1) V Fluorocarbon / (SK7V-1) Code Type Omit Without SP Super - 19 Watts Code Voltage Omit Without D1 1 V D V A1 1 VAC, 6/5 Hz A VAC, 6/5 Hz* * Watts Code Termination Omit Without C Conduit With Leads D DIN Plug Face A Amp Jr. Timer* S Dual Spade* L Dual Lead Wire* LS Sealed Lead Wire* H Molded Deutsch* See Super 1/ I.D. * Only Code Body Material Omit Steel A Aluminum Code Port Size Body Part No. Omit Cartridge Only 6T SAE-6 (B--*6T) 6B / BSPG (B--*6B) * Add A for aluminum, omit for steel. 1

15 s & Bodies & Catalog HY-5/US Information General Description -Way Poppet. For additional information see Tips on pages 1-6. Features Replaceable, one piece encapsulated, coils with minimal amperage draw Variety of coil terminations and voltages Variety of manual override options available Fast response available, (CH and CHR) rated at (. GPM) Polyurethane D -Ring eliminates need for backup rings Spherical poppet for low leakage Nylon inserted jam-nut provides secure holding in high vibration applications All external parts zinc plated Specifications Rated (At 7 PSI P) Maximum Inlet Leakage at SSU ( cst) Minimum Operating Voltage ( GPM) 5 Bar (6 PSI) 5 drops/min. (. cc/min.) 5% of rated voltage at C (7 F). Response Time Energized De-Energized C, CR 5 ms 5 ms CH, CHR ms 5 ms N, NR 5 ms ms Cartridge Material Operating Temp. Range/Seals Fluid Compatibility/ Viscosity All parts steel. All operating parts hardened steel. -5 C to +9. C ( D -Ring) (-5 F to + F) -1.7 C to C (Fluorocarbon) (-5 F to +5 F) Mineral-based or synthetic with lubricating properties at viscosities of 5 to SSU (6 to cst) Filtration ISO Code 16/1, SAE Class or better Approx. Weight.11 kg (.5 lbs.) Cavity C- (See Section for more details) Form Tool Rougher None Finisher NFT-F Poppet Type, -Way Valve Series DSL1 Performance Curves Drop vs. (Through cartridge only) Drop ( P) Drop ( P) DSL1C Out Normally Closed Hydraulic Oil 1 F ( cst) to 1 DSL1C EN. DSL1CR EN. 1 DSL1CR EN. GPM In DSL1N Out In to DSL1CH EN. DSL1CHR EN. DSL1CHR EN. DSL1C DE-EN. DSL1CR DE-EN. DSL1NR EN. to 1 Normally Open 1 to 1 to Hydraulic Oil 1 F ( cst) DSL1NR DE-EN. DSL1C 1 to 1 to DSL1N to 1 1 DSL1N DE-EN. DSL1NR DE-EN. GPM 6 1 1

16 Bodies & Catalog HY-5/US Information Dimensions Millimeters (Inches) Poppet Type, -Way Valve Series DSL1 9.7 (.) 7.9 (.6) 6.9 (.) 9.6 (1.56) PAT.XXXXXXX MADEINU.S.A. XXV XXW CCX XXX H 9.6 (1.56) 7-1 Nm (5-7 lb. ft.) See Super 1/" I.D. Information For Terminal Connectors 6.7 (.7) 19. (.7). (1.) 11. (.5) 7/ Hex. 1-7 Nm (-7 lb. ft.) /-16 UNF-A Thread 9.7 (1.17) Normal. (1.5) Shifted 9.9 (1.1) Normal. (1.5) Shifted Ø 1.6 (.5) 9. (1.57) Normal 5.1 (1.) Shifted Push and Twist M.O. (Normally Closed Only) 1. (.5) Pull and Release M.O. (Normally Closed Only).9 (.9) THIRD-ANG PROJECTION Push and Twist M.O. (Normally Open Only) Flush M.O. (Normally Open Only) Extended M.O. (Normally Open Only) Ordering Information DSL1 Size Valve Style Override Option Seals Screen Type Voltage Termination Diode Body Material Port Size Code / Style C Normally Closed Metered reverse flow CH Normally Closed Metered reverse flow (Fast response) CHR Normally Closed Full reverse flow (Fast response) CR Normally Closed Free reverse flow N Normally Open Metered reverse flow NR Normally Open Free reverse flow Out In Out In Out In Out In Out In Out In Code Override Options Omit None E Push Type with Extended Rod (N.O. Only) M Push Type with Flush Rod (N.O. Only) P Pull & Release (N.C. Only) T Push & Twist (N.C. & N.O.) Code Seals / Kit No. Omit D -Ring / (SK-) N Nitrile / (SK-N) V Fluorocarbon / (SK-V) Code Screen Omit None S Screen Code Type Omit Without SP* Super - 19 Watts *Recommended Code Voltage Omit Without D1 1 V D V A1 1/11 VAC, 6/5 Hz A / VAC, 6/5 Hz SP* Termination Omit Without C Conduit With Leads D DIN Plug Face A Amp Jr. Timer S Dual Spade L Dual Lead Wire LS Sealed Lead Wire H Molded Deutsch *Recommended Only Code Diode Omit None R Diode Code Body Material Omit Steel A Aluminum Code Port Size Body Part No. Omit Cartridge Only P 1/ NPTF (B--*P) 6P / NPTF (B--*6P) T SAE- (B--*T) 6T SAE-6 (B--*6T) 6B / BSPG (B--*6B) * Add A for aluminum, omit for steel. s & 1

17 s & Bodies & Catalog HY-5/US Information General Description -Way Poppet. For additional information see Tips on pages 1-6. Features Replaceable, one piece encapsulated, coils with minimal amperage draw Variety of coil terminations and voltages Variety of manual override options available Fast response available, (CH and CHR) rated at (. GPM) Polyurethane D -Ring eliminates need for backup rings Spherical poppet for low leakage Nylon inserted jam-nut provides secure holding in high vibration applications All external parts zinc plated Specifications Rated (At 7 PSI P) Maximum Inlet Leakage at SSU ( cst) Minimum Operating Voltage ( GPM) 5 Bar (5 PSI) 5 drops/min. (. cc/min.) 5% of rated voltage at C (7 F). Response Time Energized De-Energized C, CR 5 ms 5 ms CH, CHR ms 5 ms N, NR 5 ms ms Cartridge Material Operating Temp. Range/Seals Fluid Compatibility/ Viscosity All parts steel. All operating parts hardened steel. -5 C to +9. C ( D -Ring) (-5 F to + F) -1.7 C to C (Fluorocarbon) (-5 F to +5 F) Mineral-based or synthetic with lubricating properties at viscosities of 5 to SSU (6 to cst) Filtration ISO Code 16/1, SAE Class or better Approx. Weight.11 kg (.5 lbs.) Cavity C- (See Section for more details) Form Tool Rougher None Finisher NFT-F Poppet Type, -Way Valve Series D1 D1C Out In D1N Out In D1C D1N Performance Curves Drop vs. (Through cartridge only) Drop ( P) Drop ( P) D1C EN. D1CR EN. 1 D1CR EN. GPM to Normally Closed Hydraulic Oil 1 F ( cst) D1CH EN. D1CHR EN. D1CHR EN. D1C DE-EN. D1CR DE-EN. D1NR EN. to 1 1 to 1 to Hydraulic Oil 1 F ( cst) D1NR DE-EN. Normally Open 1 to 1 to to 1 1 D1N DE-EN. D1NR DE-EN. GPM 6 to 1 1

18 Bodies & Catalog HY-5/US Information Dimensions Millimeters (Inches) Poppet Type, -Way Valve Series D1 9.7 (.) 7.9 (.6) 6.9 (.) 9.6 (1.56) PAT.XXXXXXX MADEINU.S.A. XXV XXW CCX XXX H 9.6 (1.56) 7-1 Nm (5-7 lb. ft.) See Super 1/" I.D. Information For Terminal Connectors 6.7 (.7) 19. (.7). (1.) 11. (.5) 7/ Hex. -9 Nm (-6 lb. ft.) /-16 UNF-A Thread 9.7 (1.17) Normal. (1.5) Shifted 9. (1.57) Normal 5.1 (1.) Shifted Ø 1.6 (.5) Push and Twist M.O. (Normally Closed Only) 1. (.5) Push and Twist M.O. (Normally Open Only).9 (.9) THIRD-ANG PROJECTION Flush M.O. (Normally Open Only) Extended M.O. (Normally Open Only) Ordering Information D1 Size Valve Style Override Option Seals Screen Type Voltage Termination Diode Body Material Port Size Code / Style C Normally Closed Metered reverse flow CH Normally Closed Metered reverse flow (Fast response) CHR Normally Closed Free reverse flow (Fast response) CR Normally Closed Free reverse flow N Normally Open Metered reverse flow NR Normally Open Free reverse flow Out In Out In Out In Out In Out In Out In Code Override Options Omit None E Push Type with Extended Rod (N.O. Only) M Push Type with Flush Rod (N.O. Only) T Push & Twist (N.C.* & N.O.) *Requires Super Code Seals / Kit No. Omit D -Ring / (SK-) N Nitrile / (SK-N) V Fluorocarbon / (SK-V) Code Screen Omit None S Screen Code Type Omit Without SP* Super - 19 Watts *Recommended Code Voltage Omit Without D1 1 V D V A1 1/11 VAC, 6/5 Hz A / VAC, 6/5 Hz SP* Termination Omit Without C Conduit With Leads D DIN Plug Face A Amp Jr. Timer S Dual Spade L Dual Lead Wire LS Sealed Lead Wire H Molded Deutsch *Recommended Only Code Diode Omit None R Diode Code Body Material Omit Steel A Aluminum Code Port Size Body Part No. Omit Cartridge Only P 1/ NPTF (B--*P) 6P / NPTF (B--*6P) T SAE- (B--*T) 6T SAE-6 (B--*6T) 6B / BSPG (B--*6B) * Add A for aluminum, omit for steel. s & 16

19 s & Bodies & Catalog HY-5/US Information General Description -Way Poppet. For additional information see Tips on pages 1-6. Features Low hysteresis Replaceable, one piece encapsulated coils with minimal amperage draw Various coil terminations and voltages Various manual override options Fast response available, (CH and CHR) rated at 11 (. GPM) Polyurethane D -Ring All external parts zinc plated Specifications Rated (At 7 PSI P) Maximum Inlet Leakage at SSU ( cst) Minimum Operating Voltage 6 ( GPM) 5 Bar (6 PSI) 5 drops/min. (. cc/min.) 5% of rated voltage at C (7 F). Response Time Energized De-Energized C, CR ms ms CH, CHR 5 ms 5 ms N, NR 5 ms 175 ms Cartridge Material Operating Temp. Range/Seals Fluid Compatibility/ Viscosity All parts steel. All operating parts hardened steel. -5 C to +9. C ( D -Ring) (-5 F to + F) -1.7 C to C (Fluorocarbon) (-5 F to +5 F) Mineral-based or synthetic with lubricating properties at viscosities of 5 to SSU (6 to cst) Filtration ISO Code 16/1, SAE Class or better Approx. Weight. kg (.1 lbs.) Cavity C1- (See Section for more details) Form Tool Rougher None Finisher NFT1-F Poppet Type, -Way Valve Series DSL11 DSL11C Out In DSL11N Out In Out DSL11C In Out DSL11N Performance Curves Drop vs. (Through cartridge only) Drop ( P) Drop ( P) Normally Open Hydraulic Oil 1 F ( cst) DSL11NR En. 1 to Normally Closed Hydraulic Oil 1 F ( cst) DSL11CH En. DSL11CHR En. DSL11CH En. DSL11CHR En. DSL11CHR De-En. DSL11C De-En. DSL11CR De-En. 1 to DSL11CR En GPM to to 1 DSL11NR De-En. DSL11N De-En. DSL11NR De-En GPM to 1 1 to 1 to to 1 DSL11C En. DSL11CR En. In

20 Bodies & Catalog HY-5/US Information Dimensions Millimeters (Inches) Poppet Type, -Way Valve Series DSL11. (.). (1.71) 7-1 Nm (5-7 lb. ft.) 66.5 (.6). (.6) 11. (.99) 69.6 (.7) 11. (.) 5. (1.97) PAT.XXXXXXX MADEINU.S.A. In. (.6) XXV XXW CAX XXX H Out See Super 5/" I.D. Information For Terminal Connectors 1" Hex Nm (7-1 lb. ft.) 7/-1 UNF-A Thread 9. (1.57) Normal 5.1 (1.) Shifted 9.7 (1.17) Normal. (1.5) Shifted Push and Twist M.O. (Normally Closed Only) 1. (.5) 9.9 (1.1) Normal 6. (1.). (1.5) Shifted Pull and Release M.O. (Normally Closed Only).9 (.9) THIRD-ANG PROJECTION Push and Twist M.O. (Normally Open Only) Flush M.O. (Normally Open Only) Extended M.O. (Normally Open Only) Ordering Information DSL11 1 Size Valve Style Override Option Seals Screen Type Voltage Termination Diode Body Material Port Size Code / Style C Normally Closed Metered reverse flow CH Normally Closed Metered reverse flow (Fast response) CHR Normally Closed Free reverse flow (Fast response) CR Normally Closed Free reverse flow N Normally Open Metered reverse flow NR Normally Open Free reverse flow Out In Out In Out In Out In Out In Out In Code Override Options Omit None E Push Type with Extended Rod (N.O. Only) M Push Type with Flush Rod (N.O. Only) P Pull & Release (N.C. Only) T Push & Twist (N.C. & N.O.) Code Seals / Kit. No. Omit D -Ring / (SK1-) N Nitrile / (SK1-N) V Fluorocarbon / (SK1-V) Code Screen Omit None S Screen Code Type Omit Without SP* Super - Watts *Recommended Code Voltage Omit Without D1 1 V D V A1 1/11 VAC, 6/5 Hz A / VAC, 6/5 Hz SP* Termination Omit Without C Conduit With Leads D DIN Plug Face A Amp Jr. Timer S Dual Spade L Dual Lead Wire LS Sealed Lead Wire H Molded Deutsch *Recommended Only Code Diode Omit None R Diode Code Body Material Omit Steel A Aluminum Code Port Size Body Part No. Omit Cartridge Only P 1/ NPTF (B1--*P) 6P / NPTF (B1--*6P) P 1/ NPTF (B1--*P) 6T SAE-6 (B1--*6T) T SAE- (B1--*T) TT SAE- (B1--TT) 6B / BSPG (B1--6B) * Add A for aluminum. omit for steel. Steel body only. s & 1

21 s & Bodies & Catalog HY-5/US Information General Description -Way Poppet. For additional information see Tips on pages 1-6. Features Low hysteresis Replaceable, one piece encapsulated coils with minimal amperage draw Various coil terminations and voltages Various manual override options Fast response available, (CH and CHR) rated at ( GPM) Polyurethane D -Ring eliminates need for backup rings Nylon inserted jam-nut provides secure holding in high vibration applications All external parts zinc plated Specifications Rated (At 7 PSI P) Maximum Inlet Leakage at SSU ( cst) Minimum Operating Voltage 6 ( GPM) 5 Bar (5 PSI) 5 drops/min. (. cc/min.) 5% of rated voltage at C (7 F). Response Time Energized De-Energized C, CR ms ms CH, CHR 5 ms 5 ms N, NR 7 ms 5 ms Cartridge Material Operating Temp. Range/Seals Fluid Compatibility/ Viscosity All parts steel. All operating parts hardened steel. -5 C to +9. C ( D -Ring) (-5 F to + F) -1.7 C to C (Fluorocarbon) (-5 F to +5 F) Mineral-based or synthetic with lubricating properties at viscosities of 5 to SSU (6 to cst) Filtration ISO Code 16/1, SAE Class or better Approx. Weight. kg (.1 lbs.) Cavity C1- (See Section for more details) Form Tool Rougher None Finisher NFT1-F Poppet Type, -Way Valve Series D11 D11C Out In D11N Out In Out D11C In Out D11N Performance Curves Drop vs. (Through cartridge only) Drop ( P) Drop ( P) Normally Open Hydraulic Oil 1 F ( cst) D11NR En. 1 to Normally Closed Hydraulic Oil 1 F ( cst) D11CH En. D11CHR En. D11CH En. D11CHR En. D11CHR De-En. D11C De-En. D11CR De-En. 1 to D11CR En GPM to to 1 D11NR De-En. D11N De-En. D11NR De-En GPM to 1 1 to 1 to to 1 D11C En. D11CR En. In

22 Bodies & Catalog HY-5/US Information Dimensions Millimeters (Inches) Poppet Type, -Way Valve Series D11. (.). (1.71) 7-1 Nm (5-7 lb. ft.) 66.5 (.6). (.6) 11. (.99) 69.6 (.7) 5. (1.97) PAT.XXXXXXX MADEINU.S.A. XXV XXW CAX XXX H See Super 5/" I.D. Information For Terminal Connectors 6. (1.) 11. (.) In. (.6) Out 1" Hex Nm (51-55 lb. ft.) 7/-1 UNF-A Thread 9.7 (1.17) Normal. (1.5) Shifted Push and Twist M.O. (Normally Closed Only) 1. (.5) 9. (1.57) Normal Push and Twist M.O. (Normally Open Only).9 (.9) 5.1 (1.) Shifted THIRD-ANG PROJECTION Flush M.O. (Normally Open Only) Extended M.O. (Normally Open Only) Ordering Information D11 1 Size Valve Style Override Option Seals Screen Type Voltage Termination Diode Body Material Port Size Code / Style C Normally Closed Metered reverse flow CH Normally Closed Metered reverse flow (Fast response) CHR Normally Closed Free reverse flow (Fast response) CR Normally Closed Free reverse flow N Normally Open Metered reverse flow NR Normally Open Free reverse flow Out In Out In Out In Out In Out In Out In Code Override Options Omit None E Push Type with Extended Rod (N.O. Only) M Push Type with Flush Rod (N.O. Only) T Push & Twist (N.C. & N.O.) Code Seals / Kit No. Omit D -Ring / (SK1-) N Nitrile / (SK1-N) V Fluorocarbon / (SK1-V) Code Screen Omit None S Screen Code Type Omit Without SP* Super - Watts *Recommended Code Voltage Omit Without D1 1 V D V A1 1/11 VAC, 6/5 Hz A / VAC, 6/5 Hz SP* Termination Omit Without C Conduit With Leads D DIN Plug Face A Amp Jr. Timer S Dual Spade L Dual Lead Wire LS Sealed Lead Wire H Molded Deutsch *Recommended Only Code Diode Omit None R Diode Code Body Material Omit Steel A Aluminum Code Port Size Body Part No. Omit Cartridge Only P 1/ NPTF (B1--*P) 6P / NPTF (B1--*6P) P 1/ NPTF (B1--*P) 6T SAE-6 (B1--*6T) T SAE- (B1--*T) TT SAE- (B1--TT) 6B / BSPG (B1--6B) * Add A for aluminum. omit for steel. Steel body only. s &

23 Catalog HY-5/US Information General Description -Way Poppet. For additional information see Tips on pages 1-6. Poppet Type, -Way Valve Series D11 s & Bodies & Features Low hysteresis Replaceable, one piece encapsulated coils with minimal amperage draw Various coil terminations and voltages Various manual override options All external parts zinc plated Specifications Rated Maximum Inlet Leakage at SSU ( cst) Minimum Operating Voltage 9 ( GPM) 5 Bar (5 PSI) 5 drops/min. (. cc/min.) 5% of rated voltage at C (7 F). Response Time Energized De-Energized C, CR 1 ms ms CH, CHR 6 ms 6 ms N, NR 7 ms ms Cartridge Material Operating Temp. Range/Seals Fluid Compatibility/ Viscosity All parts steel. All operating parts hardened steel. - C to +9. C (Nitrile) (- F to + F) -1.7 C to C (Fluorocarbon) (-5 F to +5 F) Mineral-based or synthetic with lubricating properties at viscosities of 5 to SSU (6 to cst) Filtration ISO Code 16/1, SAE Class or better Approx. Weight.9 kg (.65 lbs.) Cavity C1- (See Section for more details) Form Tool Rougher None Finisher NFT1-F D11C Out In D11N Out In Out D11C In Out D11N Performance Curves Drop vs. (Through cartridge only) Drop ( P) Drop ( P) Normally Closed Hydraulic Oil 1 F ( cst) D11CH D11CHR In-Out Out-In D11C D11CR 6 5 GPM Normally Open Hydraulic Oil 1 F ( cst) D11N En. D11NR En. D11NR Out-In In-Out 6 D11N D11NR 6 5 GPM Out-In In-Out In Out-In

24 Bodies & Catalog HY-5/US Information Dimensions Millimeters (Inches) Poppet Type, -Way Valve Series D (.). (.) 1. (1.6) 5. (1.97) Ø.1 (.7) PAT.XXXXXXX MADEINU.S.A. In. (1.71) XXV XXW CAX XXX H Out 7-1 Nm (5-7 lb. ft.) See Super 5/" I.D. Information For Terminal Connectors 1-1/" Hex. -11 Nm (9-96 lb. ft.) 1-1/16-1 UN-A Thread 9.7 (1.17) Normal 66.5 (.6). (1.5) Shifted Push and Twist M.O. (Normally Closed Only) 1. (.5). (.6) 6. (1.) 9. (1.57) Normal Push and Twist M.O. (Normally Open Only).9 (.9) 5.1 (1.) Shifted THIRD-ANG PROJECTION Flush M.O. (Normally Open Only) Extended M.O. (Normally Open Only) Ordering Information D11 1 Size Valve Style Override Option Seals Type Voltage Termination Diode Body Material Port Size Code / Style C Normally Closed Metered reverse flow CH Normally Closed Metered reverse flow (Fast response) CHR Normally Closed Full reverse flow (Fast response) CR Normally Closed Free reverse flow N Normally Open Metered reverse flow NR Normally Open Free reverse flow Out In Out In Out In Out In Out In Out In Code Override Options Omit None E Push Type with Extended Rod (N.O. Only) M Push Type with Flush Rod (N.O. Only) T Push & Twist (N.C. & N.O.) Code Seals / Kit No. Omit Nitrile / (SK1-) V Fluorocarbon / (SK1-V) Code Type Omit Without SP* Super - Watts *Recommended Code Voltage Omit Without D1 1 V D V A1 1/11 VAC, 6/5 Hz A / VAC, 6/5 Hz SP* Termination Omit Without C Conduit With Leads D DIN Plug Face A Amp Jr. Timer S Dual Spade L Dual Lead Wire LS Sealed Lead Wire H Molded Deutsch *Recommended Only Code Diode Omit None R Diode Code Body Material Omit Steel A Aluminum Code Port Size Body Part No. Omit Cartridge Only 1P / NPTF (B1--*1P) T SAE- (B1--*T) 1T SAE-1 (B1--*1T) * Add A for aluminum, omit for steel. s &

25 Catalog HY-5/US Information General Description -Way Poppet. For additional information see Tips on pages 1-6. Poppet Type, -Way Valve Series DS161 s & Bodies & Features Low hysteresis Replaceable, one piece encapsulated coils with minimal amperage draw Various coil terminations and voltages Various manual override options Fast response available, (CH) rated at 6 ( GPM) All external parts zinc plated Specifications Rated Maximum Inlet Leakage at SSU ( cst) Minimum Operating Voltage ( GPM) 1 Bar ( PSI) drops/min. (1. cc/min.) 5% of rated voltage at C (7 F). Response Time Energized De-Energized C, CR 5 ms 1 ms CH ms 6 ms N, NR 5 ms 75 ms Cartridge Material Operating Temp. Range/Seals Fluid Compatibility/ Viscosity Performance Curves Drop vs. (Through cartridge only) SERVI ONLY All parts steel. All operating parts hardened steel. - C to +9. C (Nitrile) (- F to + F) -1.7 C to C (Fluorocarbon) (-5 F to +5 F) Mineral-based or synthetic with lubricating properties at viscosities of 5 to SSU (6 to cst) Filtration ISO Code 16/1, SAE Class or better Approx. Weight. kg (.75 lbs.) Cavity C16- (See Section for more details) Form Tool Rougher None Finisher NFT16-F Drop ( P) DS161C Out In DS161N Out 5 5 In In SEE D161 Drop ( P) DS161CH Out Normally Closed Hydraulic Oil 1 F ( cst) In-Out In-Out DS161C & DS161CR 77 1 GPM GPM 1 Out-In Out-In Hydraulic Oil 1 F ( cst) DS161N DS161NR Out-In Energized Normally Open DS161N DS161NR In-Out DS161NR Out-In De-Energized

26 Bodies & Catalog HY-5/US Information Dimensions Millimeters (Inches) Poppet Type, -Way Valve Series DS161 THIRD-ANG PROJECTION Ordering Information DS Size Valve Code / Style C Normally Closed Metered reverse flow CH Normally Closed Metered reverse flow (Fast response) CR Normally Closed Free reverse flow N Normally Open Metered reverse flow NR Normally Open Free reverse flow / Hex..1 Nm ( lb. ft.) 1-1/" Hex. 5 Nm ( lb. ft.) Style Out In Out In Out In Out In Out In 1. (.9) In Override Option 1. (1.5) Out Normally Closed Seals 6. (.5) Voltage Code Override Options Omit None E Push Type with Extended Rod (N.O. Only) M Push Type with Flush Rod (N.O. Only) P Pull & Release (N.C. Only) T Push & Twist (N.C. Only) Wattage Termination Body Material SERVI ONLY Port Size SEE D161 Code Seals / Kit. No. Omit Nitrile / (SK16-) V Fluorocarbon / (SK16-V) Code Voltage Omit Without D1 1 V D V A1 1/11 VAC, 6/5 Hz A / VAC, 6/5 Hz 1.9 (1.6) 19. (.7) 55.5 (.19) 1.6 (.).5 (1.75) Ø.5 (1.1) Extended Rod (N.O. Only) In Code Termination Omit Without C Conduit (AC Only) D DIN Plug Face P Dual Spade ( Only) S Dual Screw ( Only) W Dual Lead ( Only) See DS coil 5/ I.D..6 (1.6) Out Normally Open.9 (.9) Code Wattage Omit Without L 17 Watts H Watts Flush Rod (N.O. Only). (.). (.96) Normal See DS 5/" I.D. Information For Terminal Connectors 1-5/16-1 UNF-A Thread.7 (1.1) Shifted Pull and Release (N.C. Only) Code Body Material Omit Steel A Aluminum.9 (.9) Normal Operation Code Port Size Body Part No. Omit Cartridge Only 1T SAE-1 (B16--*1T) 16T SAE-16 (B16--*16T) 1B / BSPG (B16--*1B) 16B 1 BSPG (B16--16B) * Add A for aluminum, omit for steel. Steel body only. 7. (1.) Overridden Push & Twist (N.C. Only) s &

27 Catalog HY-5/US Information General Description -Way Poppet. For additional information see Tips on pages 1-6. Poppet Type, -Way Valve Series D161 s & Bodies & Features Replaceable, one piece encapsulated coils with minimal amperage draw Various coil terminations and voltages Various manual override options All external parts zinc plated New 5 Bar (5 PSI) rating NOTE: This valve will be available January 1, 11. Specifications Rated Maximum Inlet Leakage at SSU ( cst) Minimum Operating Voltage ( GPM) 5 Bar (5 PSI) 5 drops/min. (. cc/min.) 5% of rated voltage at C (7 F). Response Time Energized De-Energized C, CR 5 ms 1 ms CH ms 6 ms N, NR 5 ms 75 ms Cartridge Material Operating Temp. Range/Seals Fluid Compatibility/ Viscosity All parts steel. All operating parts hardened steel. - C to +9. C (Nitrile) (- F to + F) -1.7 C to C (Fluorocarbon) (-5 F to +5 F) Mineral-based or synthetic with lubricating properties at viscosities of 5 to SSU (6 to cst) Filtration ISO Code 16/1, SAE Class or better Approx. Weight. kg (.75 lbs.) Cavity C16- (See Section for more details) Form Tool Rougher None Finisher NFT16-F D161C Out In D161N Out In Out D161C Out In D161N Performance Curves Drop vs. (Through cartridge only) Drop ( P) Drop ( P) D161CH Normally Closed Hydraulic Oil 1 F ( cst) In-Out In-Out D161C & D161CR 77 1 GPM GPM 1 Out-In Out-In Hydraulic Oil 1 F ( cst) D161N D161NR Out-In Energized Normally Open D161N D161NR In-Out D161NR Out-In De-Energized In