Flow Control (and Check) Valves FG FCG -01/02/03/06/10. Specifications / Model Number Designation / Others. Min. Metred Flow Capacity
|
|
|
- June Dawson
- 7 years ago
- Views:
Transcription
1 low Control (and Check) Valves -//3/6/ Mounting Specifications / Model Number esignation / Others Specifications Max. Metred low Capacity () Min. Metred low Capacity () Max. Operating Pressure () Approx. Mass kg (lbs.) (.). (.5) {. (.)} (3).3 (.9) (7.9).5 (.3) 3.8 (8.) (33) 5 (66). (.53) (.53) (35) 7.9 (7.) 3 (5.7) (3) (.6) 5 (5) The figures in the brace are for pressures above 7 ( ). Model Number esignation - C G - -8 Special Seals : : Special Seals for Phosphate ster Type luids (Omit if not required) Series Number low Control Valves C: low Control and Check Valves Type of Mounting G: Mounting Valve Size 3 6 Max. Metred low Capacity () : (.6) 8 : 8 (.) 3 : 3 (7.9) 5 : 5 (33) 5 : 5 (66) 5 : 5 (3) -N Pres. Compensator Stroke Adjustment N: Applicable only for Pres. Compensator Stroke Adjustment (Option - Omit if not required) - esign Number esign Standards Refer to esign Standards: None... apanese Standard "IS" and uropean esign Standard 9... N. American esign Standard Attachment Mounting Bolts Valve Model Numbers /- /- /-3 /-6 /- apanese Std. "IS" & uropean esign Std. M5 55 Lg. M8 5 Lg. M 75 Lg. M6 3 Lg. M 6 Lg. Socket ead Cap Screw Option Pres. compensator stroke adjustment Can reduce jumping at the start of the actuator. N. American esign Std. No.- UNC -/ Lg. 5/6-8 UNC Lg. 3/8-6 UNC 3 Lg. 5/8- UNC 5 Lg. 3/- UNC 6-/ Lg. Qty. Graphic Symbols No.
2 low Control (and Check) Valves -//3/6/ / Instructions Valve Model Numbers apanese Standard "IS" Model No. M-- M-- M-- M-Y- M-3- M-3- M-3Y- M-3Z- M-6- M-6Y- M-6Z- M-Y- Thread Size Rc / Rc / Rc 3/8 Rc / Rc 3/8 Rc / Rc 3/ Rc Rc Rc -/ Rc -/ -/, uropean esign Std. Model No. M--8 M--8 M--8 M-Y-8 M-3-8 M-3-8 M-3Y-8 M-3Z-8 M-6-8 M-6Y-8 M-6Z-8 M-Y- s are available. Specify the sub-plate model number from the table above. When sub-plates are not used, the mounting surface should have a good machined finish. Thread Size / BSP. / BSP. 3/8 BSP. / BSP. 3/8 BSP. / BSP. 3/ BSP. BSP. BSP. -/ BSP. -/ BSP. -/, N. American esign Std. Approx. Thread Mass Model No. Size kg (lbs.) M--9 M--9 M--9 M-Y-9 M-3-9 M-3-9 M-3Y-9 M-3Z-9 M-6-9 M-6Y-9 M-6Z-9 M-Y-9 / NPT / NPT 3/8 NPT / NPT 3/8 NPT / NPT 3/ NPT NPT NPT -/ NPT -/ NPT -/,.8 (.8).3 (5.).3 (5.) 3. (6.8) 3.9 (8.6) 3.9 (8.6) 5.7 (.6) 5.7 (.6).5 (7.6) 6 (35.3) 6 (35.3) 37 (8.6) M-Y is special type sub-plate to be used with pipe flange. When ordering M-Y, specify pipe flange kit in addition to M-Y referring to 3 pipe flange kits Catalogue (No. Pub. C-3). Instructions Min. required pressure difference The minimum differential pressure between inlet and outlet port is required to obtain the optimum pressure compensation. It varies according to the flow rate to be set. or details, please refer to the performance curves. ree flow Check valve pressure drops vary with flow rates. If models with check valves are used, see free flow pressure drop characteristics. low adjustment [ G-] Loosen the locking screw and turn the flow adjustment dial clockwise for increase, and anti-clockwise for decrease. The dial makes about revolutions from zero to full flow and the valve opening is indicated on the revolution indicator. (Refer to characteristics of "Metred low vs. ial Position"). After flow adjustments, tighten the locking screw. [ G-, 3, 6, ] Loosen the locking screw and turn the flow adjustment handle clockwise for increase, and anti-clockwise for decrease. Open condition is indicated in digital-scale in built-in revolution indicator (Refer to the characteristics of "Metred low vs. ial Position"). After flow adjustments, tighten the locking screw. Line filter To carry out flow adjustments by as small degree as (.53 ) or less, be sure to use a line filter of m or finer and install it near the valve inlet. No.3
3 low Control (and Check) Valves -//3 Installation rawings /-- - -/9 IMNSIONS IN MILLIMTRS (INCS) Revolution Indicator Locking Screw.5(.) ex. Soc. Tightening Torque: Nm (. -.7 IN. lbs.) 5.5(.) ia. Through 9(.35) ia. Spotface 7.5 (.3) Controlled low Outlet or Reversed ree low Inlet Port low Adjustment ial ully xtended 8.5(3.) 66 (.6) 5 (.) 5.5 (.) INC..5 (.89) ia. Pressure Compensator Stroke Adjustment (Only for -- -N ) 3(.5) ia. 6.5 (.65) 3 (.) 7.5 (.3) Controlled low Inlet or Reversed ree low Outlet Port 3 (.69) 58 (.8) / /39, / /39 3(.) ully xtended 8(3.3) 53.5 (.) 5 (.77) (.73) 7 (.67) (.) Locating Pin (.6) ia. Mounting Surface (s urnished) Mounting surface: G-: ISO 663-AB-6--B G-3: ISO 663-A-7--A Locking Screw (.8) ex. Soc. 6 (.8) ia. ully xtended C Controlled low Inlet or Reversed ree low Outlet Port Pressure Compensator Stroke Adjustment (Only for - - -N ) Q S T U "V" ia. Through "W" ia. Spotface Revolution Indicator 3 N (.55) ia. L P 6 (.) Locating Pin 6(.) ia. "Y" Places Controlled low Outlet or Reversed ree low Inlet Port Model No C 6 (.57) 5 (5.7) 96 (3.78) 5 (.9) 76. (3.).6 (.) 38. (.5) 5.8 (.) 9.9 (.39).7 (.6) low Adjustment andle.5 (.) 5 (.9) imensions L 8.6 (3.5).6 (.).3 (.7) 6.8 (.3) INC. mm (Inches) N P (.9) 9.8 (.7) 9.9 (.39).7 (.6) Q 3 (.8) 5 (5.98) S 69 (.7) 98 (3.86) T (.57) 6 (.5) U 3 (.9) (.6) V 8.8 (.35) (.3) Mounting Surface (s urnished) W (.55) 7.5 (.69) 39 (.5) 63 (.8) Y No.
4 / /39 / /39 low Control (and Check) Valves -6/ Installation rawings Mounting surface: G-6: ISO 663-AP-8--A IMNSIONS IN MILLIMTRS (INCS) "" ia. through "Y" ia. Spotface Locking Screw (.8) ex. Soc. 6 (.8) ia. ully xtended "C" Controlled low Inlet or Reversed ree low Outlet Port P Pressure Compensator Stroke Adjustment (Only for - - -N ) Q S T a U W N low Adjustment andle L INC. Locating Pin "V" ia. Places Controlled low Outlet or Reversed ree low Inlet Port Revolution Indicator Z Only for low Control and Check Valves ( - - -N ) Mounting Surface (s urnished) Model No C 98 (7.8) 67 (.5) 8 (7.9) (9.6) 6. (5.75) 96.9 (7.75) 73 (.87) 98.5 (3.88) 7 (.67) 3.5 (.93) 7 (6.85) 8 (8.98) 33. (5.5) 77.8 (7.) imensions mm (Inches) L N P Q S 99 (3.9).5 (5.69) (.73) 6 (.).3 (.8) 5 (.98) 8 (7.) (8.3) 3 (5.) 6 (6.3) T 5 (.3) 37 (5.39) U 65 (.56) 85 (3.35) V 6 (.63) 8 (.7) W 7 (.8) (.39) 7.5 (.69).5 (.85) Y 6 (.) 3 (.6) Z 9 (.35) 7.5 (.3) a 3 (.6) 35 (5.3) No.5
5 for low Control (and Check) Valves Installation rawings M--/8/9 5.5(.) ia. Through 9(.35) ia. Spotface 8.5 (.73) 5 (.) 36 (.) 9 (.35) "A" Thd. (rom Rear) Places "B" Thd. "C" eep 5(.) ia. 8(.3) eep 6 (.) M-- M--8 M--9 "A" Thd. Rc / / BSP. / NPT "B" Thd. C M5 M5 No.- UNC (.55) (.55) 5 (.59) 3.5 (.36) 3. (.8) 3.5 (.36) 3.5 (.36) 3 (.69) 55 (.7) 6.5 (.65) (.55).5 (.9) 6 (.) 63 (.8) 76 (.99) 88 (3.6) 6(.) ia. Places 7 (.67) (.87) M- -/8/9 Y 8.8(.35) ia. Through (.55) ia. Spotface 3.8 (.9).5 (.5) 3.9 (.6) 79. (3.3) 76. (3.) 5 (.3) 9.5 (.37) (.55) "" ia. Places "B" Thd. "C" eep 7(.8) ia. (.39) eep IMNSIONS IN MILLIMTRS (INCS) 8.6 (3.5) 5. (.6). (.) 78 (3.7) 6 (.7) (.87) (.39) 96 (3.78) (.7) (5.5) "A" Thd. (rom Rear) Places 6 (.63) "A" Thd. "B" Thd. C M-- M--8 M--9 M-- M--8 M--9 M-Y- M-Y-8 M-Y-9 Rc / / BSP. / NPT Rc 3/8 3/8 BSP. 3/8 NPT Rc / / BSP. / NPT M8 5/6-8 UNC M8 5/6-8 UNC M8 5/6-8 UNC (.55) 8 (.7) (.55) 8 (.7) (.55) 8 (.7). (.3).7 (.6). (.3). (.55) 5. (.6). (.55). (.55) 5. (.59). (.55) 5 (.3) 5 (.). (.) (.55) 5 (.98) 35 (.38) No.6
6 3 M- 3 -/8/9 3Y 3Z "A" Thd. (rom Rear) Places for low Control (and Check) Valves Installation rawings 33. (.3).8 (.3).(.3).6(.) 75(.95).6 (.8). (.56) "" ia. Places "B" Thd. "C" eep (.79) ia. 5(.59) eep Places. (.) 86.5 (3.) 8.6 (.3).5(.85) (.3) 5(.9) 6(5.75) 68(6.6).6 (.) 3 (5.) (.3) ia. Through 7.5(.69) ia. Spotface (.79) "A" Thd. "B" Thd. C M-3- M-3-8 M-3-9 M-3- M-3-8 M-3-9 M-3Y- M-3Y-8 M-3Y-9 M-3Z- M-3Z-8 M-3Z-9 Rc 3/8 3/8 BSP. 3/8 NPT Rc / / BSP. / NPT Rc 3/ 3/ BSP. 3/ NPT Rc BSP. NPT M 3/8-6 UNC M 3/8-6 UNC M 3/8-6 UNC M 3/8-6 UNC 8 (.7) (.83) 8 (.7) (.83) 8 (.7) (.83) 8 (.7) (.83). (.55) 5. (.59). (.55) 7.5 (.69) 9. (.75) 7.5 (.69) 3. (.9) 75 (.95) 7 (.76).6 (.8) 5.6 (.). (.) 6. (.63) 86.5 (3.) 8.5 (3.) 5 (.98) (.57) 6 M-6Y-/8/9 6Z 7.5(.69) ia. Through 6(.) ia. Spotface.3 (.8) 5 (.5).6 (.6) 6.(5.75).(5.69).8 (.3). (.87) 9(.) ia. Places "B" Thd. "C" eep 7(.67) ia. (.39) eep Places (.9) IMNSIONS IN MILLIMTRS (INCS) 33. (5.5).8 (.3).3 (.63).7 (.5) 6 (.96) 7 (6.85) 35(.38) 9(.75) 8(7.9) (8.35) 5(9.8) "A" Thd. (rom Rear) Places "A" Thd. "B" Thd. C M-6- M-6-8 M-6-9 M-6Y- M-6Y-8 M-6Y-9 M-6Z- M-6Z-8 M-6Z-9 Rc BSP. NPT Rc -/ -/ BSP. -/ NPT Rc -/ -/ BSP. -/ NPT M6 5/8- UNC M6 5/8- UNC M6 5/8- UNC 3 (.8) 35 (.38) 3 (.8) 35 (.38) 3 (.8) 35 (.38).8 (.3) 99 (3.9). (.87) 3 (.3).8 (.3) 99 (3.9) 8 (.7) 3 (.9) 5 (.77) 6 (.36) 35 (.38) (.57) No.7
7 for low Control (and Check) Valves Installation rawings M-Y-/9 IMNSIONS IN MILLIMTRS (INCS) "A" Thd. "C" eep 77.8 (7.).5 (5.69) 36 (.) 55.5 (.9) 9 (.) 68.5 (.7).6 (.6) 98. (7.8) 96.9 (7.75).5 (5.69) (5.5) 3.9 (.37) 73 (.87) 73 (.87) 73 (.87) 7.3 (.68) "B" Thd. "" eep 8 Places (rom Rear) (.79) ia. 5(.59) eep Places (.3) 3.5(.7) ia. Places 8 (8.98) 5 (9.8) (3.9) SQ. Pipe lange.5(.85) ia. Through 3(.6) ia. Spotface 5 (.77) 5 (.98) 73 (.87) (9.6) 8 (.8) 33 (3.5) 8(.89) ia. Places 8 (3.5) 5 (.97) M-Y- M-Y-9 "A" Thd. M 3/- UNC "B" Thd. C M6 5/8- UNC 3 (.6) 3 (.6) 3 (.6) 3 (.3) No.8
8 low Control (and Check)Valves -//3/6/ Performance Characteristics Metred low vs. ifferential Pressure Metred low vs. Viscosity ifferential Pressure mm /s SSU Viscosity mm /s ifferential Pressure SSU Viscosity mm /s 3 ifferential Pressure SSU Viscosity ifferential Pressure mm /s SSU Viscosity mm /s 3 ifferential Pressure SSU Viscosity No.9
9 low Control (and Check) Valves -//3/6/ Performance Characteristics Metred low vs. ial Position ial Position andle Position andle Position andle Position andle Position Min. Required Pressure ifference ifferential Pressure ifferential Pressure ifferential Pressure ifferential Pressure ifferential Pressure No.
10 low Control and Check Valves -//3/6/ Performance Characteristics Pressure rop P Pressure rop P Pressure rop for Reversed ree low ydraulic luid: Viscosity 35 mm /s (6 SSU), Specific Gravity ree low - Throttle Closed Throttle ully Open (--) Throttle ully Open -3 Throttle Closed 5 5 L /min Throttle ully Open (--8) Pressure rop P Pressure rop P Throttle Closed Throttle ully Open 3 5 L /min 6 8 ree low -6 Throttle Closed Throttle ully Open 3 L /min 3 5 ree low 6 8 ree low Pressure rop P Throttle Closed Throttle ully Open 6 8 L /min 5 5 ree low or any other viscosity, multiply the factors in the table below. mm /s 6 8 Viscosity SSU actor or any other specific gravity (G'), the pressure drop ( P') may be obtained from the formula below. P'= P (G'/.85) No.
11 low Control (and Check) Valves -//3 Spare Parts List /9 CAUTION When making replacement of seals, please do it carefully after reading through the relevant instructions in the Operator's Manual Section - (- Type) Y Y Section Y-Y (- Type) List of Seals Item Name of Parts - - Section - (/-- -N Type) Part Numbers SO-NA-P SO-NB-P9 SO-NB-P SO-NB-P6 SO-NB-P SO-NA-P5 SO-NB-P7 Seal it Numbers S--- S--- Qty. Note: When ordering the seals, please specify the seal kit number from the table below. List of Seal its / /39 / / List of Seals Item Name of Parts Back Up Ring Section - (- Type) - SO-NA-P SO-BB-P SO-NB-P5 SO-NB-PA SO-NB-P SO-NB-P SO-NB-P8 SO-NB-G5 Part Numbers -3 SO-NA-P SO-BB-P SO-NB-P5 SO-NB-P6 SO-NB-P8 SO-NB-P SO-NB-P8 SO-NB-G35 Qty. Note:When ordering the seals, please specify the seal kit number from the table right (- Type) (/- - -N Type) Section - List of Seal its Seal it Numbers S---3 S---3 S--3-3 S No.
12 low Control (and Check) Valves -6/ Spare Parts List / /39 / /39 CAUTION When making replacement of seals, please do it carefully after reading through the relevant instructions in the Operator's Manual Section - (- Type) Section - (- Type) List of Seals Item Name of Parts Back Up Ring -6 SO-NA-P SO-BB-P SO-NB-P SO-NB-P3 SO-NB-P3 SO-NB-P5 SO-NB-P Part Numbers - SO-NA-P SO-BB-P SO-NB-P3 SO-NB-P8 SO-NB-P5 SO-NB-G75 SO-NB-P3 Qty. Note) When ordering the seals, please specify the seal kit number from the table right. 3 List of Seal its Seal it Numbers S--6-3 S--6-3 S---3 S---3 No.3
005 SERIES MODULAR VALVES. Pub. EC-1401. General Information Up to 25 MPa (3630 PSI), 10 L /m in (2.6 U.S.GPM) Modular Valve Type
5 SERIES General Information Up to 5 Ma (3 SI), 1 L /m in (6 USGM) ub EC-11 MODULR VLVES hese modular valves have the same mounting surface as those for the DSG-5 solenoid operated directional valves and
Pressure Relief. Pressure Control Valve R(C)G(O)-03, 06 and 10; R(C)T(O)-03, 06 and 10 VICKERS. Basic Characteristics. Sectional Illustrations
VICKERS Pressure Relief Pressure Control Valve R(C)G(O)-03, 06 and 10; R(C)T(O)-03, 06 and 10 Sectional Illustrations RCG-** Model Shown RCT-** Model Shown Basic Characteristics Type...................
"A" Series Variable Displacement Piston Pumps Single Pump, "OBE" Type Electro-Hydraulic Proportional Pressure & Flow Control Type
Single Pump, "OBE" Type Electro-Hydraulic Proportional & Flow Type Input Signal for Safety valve Input Signal for Flow Amplifier Proportional Solenoid Sensor Valve Piston (S Input Voltage L) Performance
Vickers. Check Valves. Check Valves. Inline, right angle, manifold mounted, and pilot operated designs. Released 9/93
Vickers Check Valves Check Valves Inline, right angle, manifold mounted, and pilot operated designs Released 9/93 645 Introduction Vickers inline, right-angle, and manifold mounted check valves are direct
Chapter 5: Flow Valves
Catalogue HY11-300/UK Contents Chapter : Flow Valves Series Description Size Mounting Page Parker Standard DIN / ISO 1/4 3/8 1/2 3/4 1 06 10 16 Throttle valves, manual adjustment MVI -2 NS -4 FS With free
Flow Control Valves. Note: Also see R04C3 on page DC1. Denotes New Winner s Circle Product Line. Catalog HY15-3502/US
Catalog HY15-352/US Contents Control SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO. LPM/GPM BAR/PSI NEED VALVES J2A2... C8-2... Needle Valve, Cartridge Type...45/12... 42/6... 5-6 NVH81... C8-2... Needle
2/2 and 3/2 Way Size 6 Seat Valves
2/2 and 3/2 Way Size 6 Seat Valves Directly operated Interface and subplate dimensions according to DIN 24340 and ISO Line connection port size G 3/8" Cartridge design PN [p max. ] = 315 bar 7501856.06.12.08
03 SERIES MODULAR VALVES
3 SERIES General Information Mounting Surface : ISO 44-C--4-, CETO-, N-DO Up to Ma (363 SI), 7 L /min (8. U.S.GM) ub. EC-43 MODULR VLVES The modular valves are functional elements with which a hydraulic
Pressure relief valves Size 6
Pressure relief valves Size 6 direct controlled Interface to DIN 24 340 and ISO 6264 PN [p max. ] = bar 750400.06.0.06 Description (standard units) Design The pressure relief valves of Type D B C 6 are
KDG3V-5/7/8, 10 Series
Vickers roportional Valves KDG3V-5/7/8, 1 Series Single-Stage with Hydraulic ilot Operation High Flow roportional Directional Control Valves asic Characteristics Max. pressure.......... up to 35 bar (5
Check Valves. Pilot Operated Check Valves. Vickers. PCGV-6/8, 10 Series; PCG5V-6/8, 20 Series. Typical Section. Features and Benefits
Vickers Check Valves Pilot Operated Check Valves PCGV-6/8, 10 Series; PCG5V-6/8, 20 Series Typical Section Typical PCG5V model with internally drained pilot piston internal leakage through the closed pilot
FIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES
BQ FIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES Versatility, power, compactness and low running costs are the main characteristics of B&C vane pumps. All the components subject to wear are contained
FIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES
BQ FIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES Versatility, power, compactness and low running costs are the main characteristics of B&C vane pumps. All the components subject to wear are contained
FIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES
BQ FIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES Versatility, power, compactness and low running costs are the main characteristics of B&C vane pumps. All the components subject to wear are contained
P2/P3 Series Piston Pumps Variable Displacement zp09. Catalog HY28-2662-CD/US
P2/P3 Series Piston Pumps Variable Displacement zp9 Catalog HY28-2662-CD/US A3 Series P2/P3 A4 General Information General Information Series P2/P3 P2 Series The newly developed variable displacement piston
VARIABLE DISPLACEMENT AXIAL PISTON PUMPS. For truck applications
VARIABLE DISPLACEMENT AXIAL PISTON PUMPS For truck applications TVP FEATURES Variable displacement axial piston pumps swash plate design ideally suited for open circuit truck applications. The compact
Pressure reducing valve, direct operated, Type ZDR 6 D
RE 26 57/2.3 Replaces:.2 Pressure reducing valve, direct operated, ype ZDR 6 D Nominal size 6 Series 4X aximum operating pressure 2 bar aximum flow 5 L/min K 4279/ ype ZDR 6 DP2 4X/ Y Overview of contents
E4E PILOT OPERATED DIRECTIONAL CONTROL VALVE WITH ELECTRIC PROPORTIONAL CONTROL SERIES 51
83 300/100 ED E4E PILOT OPERATED DIRECTIONAL CONTROL VALVE WITH ELECTRIC PROPORTIONAL CONTROL SUBPLATE MOUNTING CETOP P05 p max 250 bar Q max (see specification table) MOUNTING INTERFACE OPERATING PRINCIPLE
2-Port Self-acting Temperature Control Valve Selection for Heating and Cooling Applications
Page 1 of 12 TI-S21-07 CH Issue 1 Cert. No. LRQ 0963008 ISO 9001 2-Port Self-acting Temperature Control Valve Selection How to select a system Valve selection: 1. Is the application for heating or cooling?
2-way flow control valve Type 2FRM 6
RE /0.0 Replaces:.0 -way flow control valve Type FRM Nominal size Series X Maximum operating pressure bar ) Maximum flow L/min ) When used in conjunction with a rectifier plate up to 0 bar H//D /97 + H//D
RPE3-04. Functional Description HA 4014 10/2010. Directional Control Valves Solenoid Operated. Replaces HA 4014 12/2007
Directional Control Valves Solenoid Operated RPE3-04 Size D 04 (02) 320 bar (4600 PSI) 30 L/min(8.0 GPM) HA 4014 10/2010 Replaces HA 4014 12/2007 4/3-, 4/2- way directional control valves with solenoid
PVM Piston Pumps Service Manual
PVM Piston Pumps Service Manual PVM018/020 PVM045/050 PVM057/063 PVM074/081 PVM098/106 PVM131/141 Table of Contents Service Parts Pump Description... 3 Basic pump Pump Operation Controls Types Part Identification...
HYDRAULIC MOTORS HYDRAULIC SYSTEMS DIVISION. Outstanding Hydraulic Products, Service and Expertise, Worldwide
HYDRAULIC MOTORS HYDRAULIC SYSTEMS DIVISION Outstanding Hydraulic Products, Service and Expertise, Worldwide Introduction to Haldex Hydraulic Motor Capability Haldex offers one of the widest selections
Series PVP Variable Volume Piston Pumps
Series PVP Variable Volume Piston Pumps Catalog HY28-2662-CD/US Revised June, 212 hpm12-1.p65, lw, jk 1 Notes Series PVP hpm12-1.p65, lw, jk 2 Introduction Series PVP Series Sizes 6-14 Phased Out For Reference
Pressure Relief. Pressure Relief and Sequence Valves CG2V-6/8, 10 Series; CG5V-6/8, 20 Series. Vickers. Features and Benefits.
Vickers Pressure Relief Pressure Relief and Sequence Valves CG2V-6/8, 1 Series; CG5V-6/8, 2 Series Typical Section CG2V-6*W-1 relief valve Basic Characteristics Maximum pressure.......... 35 bar (5 psi)
Manapak Sandwich Valves Series CM, CPOM, FM, PRDM, PRM, RM
Introduction Manapak valves provide a variety of check, flow control, pressure relief and pressure reducing functions in a compact NFPA D03, D05 and D08 sandwich style valve. The NFPA D03 valve body conforms
Vickers. Piston Pumps
Vickers Piston Pumps xial Piston Pumps Fixed and Variable Displacement PF, PF, PF PV /6, PV /, PV /9, PV and PV 9 to SE PV /6, PV /, PV /9 to DIN/ISO 39, Part G-379 Contents asic characteristicts..........................................................................................3
DXPE*J 85 320/215 ED. DIRECtIONAL CONtROL VALVE PILOt OPERAtED, WItH OBE AND FEEDBACK. Q max (see performance table) SERIES 30
85 320/215 ED DXPE*J DIRECtIONAL CONtROL VALVE PILOt OPERAtED, WItH OBE AND FEEDBACK SUBPLAtE MOUNtINg DXPE5J CEtOP P05 DXPE5RJ ISO 4401-05 (CETOP R05) DXPE7J ISO 4401-07 (CETOP 07) DXPE8J ISO 4401-08
Integrated Presetting Valves - for Normal Volume Flows RA-N and for Small Volume Flows RA-U
Integrated Presetting Valves - for Normal Volume Flows RA-N and for Small Volume Flows Application Integrated valves, type RA-N (013G1382) and RA- U (013G1383), with built-in presetting are designed for
Integrated Presetting Valves for Normal 013G0372 and Small 013G0373 Volume Flows
Integrated Presetting Valves for Normal 013G0372 and Small 013G0373 Volume Flows Application Integrated valves, type RA-N (013G0372) and RA- U (013G0373), with built-in presetting are designed for incorporation
Fluid. Flu. Fluid Fluid. uid Power d Power P. Fluid Power P. Fluid Power. Fluid Power Power. d Power. Directional Cetop Valves DCV 03.
Catalogue Directional Cetop Valves DCV 03 Power Flu uid Power d Power P wer Power Power Power Power Power d Power Power Power ower Power Power wer Power Power P Power Power Powe d Power Power Power Power
Fixed displacement vane pumps
Fixed displacement vane pumps RE 1335/1.5 Replaces: 11.2 1/22 Types PVV and PVQ Nominal sizes 18 to 193 Series 1X Maximum operating pressure 21 bar Maximum displacement 18 to 193 cm 3 Doppelpumpe_d_ Double
3/2- and 2/2-way cartridge valve type BVE
3/2- and 2/2-way cartridge valve type BVE for any flow direction, zero leakage, all ports pressure resistant Flow Q max = 70 lpm Perm. pressure p max = 400 bar Additional valves with same function: ' Type
Variable Displacement Pump AA10VSO
Variable Displacement Pump AA10VSO Series 31, Industrial Model, for Open Circuits Axial piston, swashplate design Brueninghaus Hydromatik Sizes 28...140 Nominal pressure 4000 psi Peak pressure 5100 psi
PVH131/141 Variable Displacement Piston Pump - 11 Design
Service Data Vickers Piston Pumps PVH131/141 Variable Displacement Piston Pump - 11 Design Revised 05/01/97 M-2209-S Maximum Adjustable Stop S Option 913341 Locknut Torque 25-50 N.m. (18-37 lb. ft.) Torque
*Rated to 207 Bar/3000 PSI with Aluminum Body. Denotes New Winner s Circle Product Line. Catalog HY15-3502/US
Bodies & Contents SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO. LPM/GPM BAR/PSI STANDARD CHECKS D1A6... 2U... Valve Insert, Ball Type...145/38... 42/6... 5 D1B125... 2C... Valve Insert, Ball Type...
DATA PD-500-000. SV13.., SV14.. Levelling Valves. Product. Function. Technical Features. Range Overview
Commercial Vehicle Systems Product DATA SV.., SV.. Doc. No. Y075 (Rev. 00) PD-500-000 Function On vehicles fitted with air suspension, the Levelling Valve ensures that the axle suspension air bags maintain
Inrush Apparent power (VA) Flow Characteristics/Weight. Port size Rc. Valve model VS3115-01 VS3115-02 VS3110-02 VS3110-03 VS3114-00.
Port Direct Operated Solenoid Valve Series VS5/0 Metal Seal Multiple pressure supply is possible with balanced spool sleeve. Any given port can accept high or low pressure supply without affecting the
820 NOVA mv THERMOPILE POWER SUPPLY THERMOELECTRIC SAFETY DEVICE SERVO-CONTROLLED PRESSURE REGULATOR SHUT-OFF SOLENOID VALVE.
SIT Group 820 NOVA mv MULTIFUNCTIONAL CONTROL FOR GAS THERMOPILE POWER SUPPLY THERMOELECTRIC SAFETY DEVICE SERVO-CONTROLLED PRESSURE REGULATOR SHUT-OFF SOLENOID VALVE PIN 3AP700/2 SINGLE-KNOB MULTIFUNCTIONAL
POWERS CONTROL RC 195 Single Input Receiver-Controller
Document No. 155-119P25 RC 195-4 POWERS CONTROL RC 195 Single Input Receiver-Controller Description The RC 195 Single lnput Receiver-Controller is a pneumatic instrument which receives one pneumatic input,
Direct Operated Regulator for 6.0 MPa (Relieving Type) How to Order. Body size 30 40
Direct Operated Regulator for (Relieving Type) Series Service life: 0 million cycles Using NSF-H-certified grease on the guide ring (sliding) part. Improved durability under a high environment with a polyurethane
A10VSO Nominal size 18 see RD 92712 A10VSO Nominal size 28...140 see RD 92711
A10VO Nominal size 18 see RD 92712 A10VO Nominal size 28...140 see RD 92711 The variable displacement axial piston pump A10VO in swashplate design was designed for hydrostatic drives in open circuits.
Electro-hydraulic pressure switches type DG
Electro-hydraulic pressure switches type DG Pressure p max = 700 bar See also: For electronic pressure switches type DG 5 E see D 5440 E Analogous pressure transducer type DT 1 see D 5440 T Analogous pressure
Series TMM Axial Piston Motor. Technical Information
Series TMM Axial Piston Motor Technical Information General Description GENERAL DESCRIPTION These motors are designed primarily to be combined with other products in closed circuit systems to transfer
Check Valves Valve locator
Check Valves Valve locator Functional Symbol Flow Typical Model Cavity Rating Pressure Page Check valve, direct L/min (USgpm) bar (psi) FPR/4 Inline () 5 (5) - FPR/8 Inline (8) 5 (5) - FPR/ Inline 45 ()
Line rupture protection valves type LB
Line rupture protection valves type LB Pressure p max Flow rate Q A max = 500 bar = 4... 160 lpm Screw-in versions Type LB...C In-line versions Type LB...G Type LB...F 1. General Line rupture protection
Rexroth Hydraulic Pump A10VO Series User Manual
Rexroth Hydraulic Pump A10VO Series User Manual Rexroth Hydraulic pump A10VO Series User Manual Revised 5/1/2009 Page 1 of 12 Functional Purpose This pump is preferred over a fixed displacement (gear)
Pressure Relief. Pressure Relief Valves. Vickers
Vickers Pressure Relief Pressure Relief Valves Remote Controls, Relief and Sequence Valves, and Single and Multiple Pressure Solenoid and Air Operated Relief Valves 511./EN/1297/A Introduction Remote Controls
Proportional relief valves type AGMZO-TERS, AERS two stage, with integral or remote pressure transducer, ISO 6264 size 10, 20 and 32
www.atos.com Table F040-1/E Proportional relief valves type AGMZO-TERS, AERS two stage, with integral or remote pressure transducer, ISO 6264 size 10, 20 and 32 AGMZO are two stage poppet type proportional
2 & 5-Wire Overfill Sensors
2 & 5-Wire Overfill Sensors Optic overfill sensors detect the presence of liquid at a preset level. The new Civacon Universal 2 & 5-Wire Sensor is fully compatible with all our current Sensors and Monitors,
IF IT FLOWS THE BOWIE PUMP CAN PUMP IT
IF IT FLOWS THE BOWIE PUMP CAN PUMP IT Bowie Industries, Inc. Bowie, TX 76230 USA Page 1 Bowie Pumps Manual General Pump Information..Page 2 300 Series Pumps.. Page 5 400 Series Pumps.Page 11 500 Series
Machine needle shut-off nozzle type HP
Machine needle shut-off nozzle type HP pneumatically or hydraulically controlled Index of contents Chapter Page Safety instructions... 2 Installation instructions... 3 - Installation steps... 3 Initial
P7100 PUMP INSTALLATION INSTRUCTIONS Diesel Care & Performance Inc
P7100 PUMP INSTALLATION INSTRUCTIONS Diesel Care & Performance Inc Installation Timing Pin Location CAUTION: Before installing the injection pump, be sure that number 1 cylinder is at the Top Dead Center
DSE5J 83 280/112 ED DIRECTIONAL VALVE WITH PROPORTIONAL CONTROL FEEDBACK AND INTEGRATED ELECTRONICS SERIES 10 SUBPLATE MOUNTING ISO 4401-05 (CETOP 05)
83 280/112 ED DSE5J DIRECTIONAL VALVE WITH PROPORTIONAL CONTROL FEEDBACK AND INTEGRATED ELECTRONICS SERIES 10 SUBPLATE MOUNTING ISO 4401-05 (CETOP 05) p max 320 bar Q max 180 l/min MOUNTING SURFACE OPERATING
*Rated to 207 Bar/3000 PSI with Aluminum Body. Catalog HY15-3501/US SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO.
Bodies & Contents SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO. /GPM BAR/PSI STANDARD CHECKS D1A6... 2U... Valve Insert, Ball Type...145/38... 42/6... 5 D1B125... 2C... Valve Insert, Ball Type... 5/132...
Pipe threads for tubes and fittings where pressure-tight joints are not made on the threads. (requires PTFE sealing tape or liquid sealant).
Fittings for CO 2 Pipe Threads Pipe thread references quoted in this catalogue conform with the requirements specified in the latest issue and amendments of the following ISO Standards: ISO 7-1 (BS21)
Specifications. Model Flow type Pressure type. Air Maximum operating pressure. 1.0 MPa Ambient and fluid temperature. 3% F.S.
Electro-Pneumatic Proportional Valve Series /VEP Electro-pneumatic proportional valve: Flow type () Controls the flow rate steplessly according to current. (It is a / port valve that has an electrical
Solenoid Operated Directional Valves
INDUSTRIAL FLUID POWER COMPONENTS AND SYSTEMS SERIES 35 Solenoid Operated Directional Valves SF-2C-115A-35 S-1AY-12D-35 SD-2C-12D-35 Features High Flow/ High Pressure: Up to 40 gpm / 5000 psi working pressure*.
15/40/80CN Series Medium Pressure Filters
1/4/8CN Series Medium Pressure Filters Max 32 l/min - 7 bar Global Filtration Technology 1/4/8CN Series TYPICAL APPLICATIONS Compressor Lube Oil Off-line Filter Loops Machine Tools (Automotive Standard)
Table of Contents. Overview 1. Pump Disassembly 2. Control Disassembly / Reassembly 7. Pump Reassembly 13. Adjustment Procedures DR Control 19
Table of Contents Overview 1 Pump Disassembly 2 Control Disassembly / Reassembly 7 Pump Reassembly 13 Adjustment Procedures DR Control 19 Adjustment Procedures DRG Control 20 Adjustment Procedures DFR
Shut-off & Lockout Valves 1/4" to 1-1/2" port size
Section 16 Shut-off & Lockout Valves 1/4" to 1-1/2" port size Contents T72 Excelon Shut-off & Lockout Valves 1/4", 3/8" Port Sizes....................................ALE-16-2 T73 Excelon Shut-Off & Lockout
PRODUCT CARD GEAR PUMPS AND MOTORS ORS GROUP 1 E0.14.0503.02.01 TM GEAR PUMPS AND MOTORS GROUP 1 INDEX Page 1 - GENERAL INDEX Page 2 - Features - Quick guide Page 3 - Features - General - Working conditions
Water Separator. Main Line Filter. Mist Separator. Micro Mist Separator 150C 250C 350C 450C AMG 550C 2C 4C 8C 11C AFF 22C 37B 75B 150C 250C 350C 450C
Water droplet removal Water Separator Water droplet separation rate: % Model Flow capacity l/min (ANR) Max. flow capacity at 0.7 MPa inlet pressure 300 750 1,500 AMG 2,0 AMG to AMG/ Large dust particle
Hydraulic Pump/Motor Division Hydraulic Pump/Motor Division
Parker Piston Pumps Otsego Core Competency... Piston Pumps PAVC Series : 4 displacements from 33-100 cc/r, 207 Bar, 3000 RPM PVP Series : 9 displacements from 16-140 cc/r, 250 Bar, 3000 RPM PV Plus : 12
Solenoid Operated Directional Valves
INDUSTRIAL FLUID POWER COMPONENTS AND SYSTEMS SERIES 35 Solenoid Operated Directional Valves SD-2B-115A-35 SDS-2H-12D-35 S-2B-115A-35 Features High Flow/ High Pressure: Up to 25 gpm / 5000 psi working
Model 43AP Pneumatic Controller, Style B
Instruction MI 011-476 January 1980 Model 43AP Pneumatic Controller, Style B Installation and Operation Model 43AP Controller continuously detects the difference between a process measurement and its set
Fisher 1052 Size 20 Diaphragm Rotary Actuator with F and G Mounting Adaptation
Instruction Manual 1052 Size 20 Actuator (F & G) Fisher 1052 Size 20 Diaphragm Rotary Actuator with F and G Mounting Adaptation Contents Introduction... 1 Scope of manual... 1 Description... 1 Specifications...
Fisher 1061 Pneumatic Piston Rotary Actuator with Style F & G Mounting Adaptations
Instruction Manual 1061 F & G Actuator Fisher 1061 Pneumatic Piston Rotary Actuator with Style F & G Mounting Adaptations Contents Introduction... 1 Scope of Manual... 1 Description... 2 Specifications...
FullFloXF. 2-Way and 3-Way Diverter Valve and Check Valve. Installaton and Operation Instructions
FullFloXF -Way and -Way Diverter Valve and Check Valve Installaton and Operation Instructions SERIOUS BODILY INJURY OR DEATH CAN RESULT IF THE VALVE IS NOT INSTALLED AND USED CORRECTLY. INSTALLERS, POOL
Safety for Hydraulics Leak free double check valve, pilot operated, series DERV Cartridge type, two stage
Safety for Hydraulics Leak free double check valve, pilot operated, series Cartridge type, two stage 8 1 1 General description spring closed, pilot operated, cartridge type poppet valve it holds the load
2003 Audi A4. AUDI' '3.0L V6 - AVK Engine - A4 & A6
Installation (A4) CAUTION: Before installation, ensure camshafts are aligned, crankshaft is locked in place and camshaft gear bolts are loose as described in removal procedures. When turning camshaft,
kymanual or Automatic - it s your Choice
. kymanual or Automatic - it s your Choice ky LKB Automatic or Manual Butterfly Valve Application LKB is a sanitary automatically or manually operated butterfly valve for use in stainless steel pipe systems.
Line-Mounted Valves L Series
Spare Part Kit for Valve Series B1LSAD3 Line-Mounted L Series Accessories Spare Part Kits All Series Valve Series B1LSAD3 40.1609 Incl. O-rings, gaskets, spring or muffl er Spare Part Kit for Valve Series
Hydraulic Flow Control Valves
Webtec Products Limited Hydraulic Flow Control Valves Quality Hydraulic Components from the Webtec Range CONTENTS DESCRIPTION PAGE No. ILFC Series Fixed Flow Pressure Compensated Control Valve 1 VFC Series
SOLENOID VALVES 3-4 WAY
SOLENOID VLVES - WY IE/C// CT: FP/VCR Page: 7 SHEET: / SOLENOID VLVES - - WY CV SOLENOID VLVES -WY/-POSITION /- UNF.7 5.7 The electric valve is a -way -position directional electrically controlled Slight
Universal Adjustable Fuel Pressure Regulator
Universal Adjustable Fuel Pressure Regulator Installation Instructions for: Part Numbers 25-302 U.S. Patent # 6,298,828! Due WARNING: to the fact that this installation deals with your fuel system this
POWERS Controls No. 4 Pneumatic Damper Actuator
POWERS Controls No. 4 Pneumatic Damper Actuator Technical Instructions Document No. 155-032P25 AP 331-2 Actuator Assembly 331-2929 Typical Actuator Assembly 331-2904 Typical Actuator Assembly 331-3000
Volkswagen Jetta, Golf, GTI 1999, 2000 Brake System 47 Brakes - Hydraulic Components (Page GR-47)
47 Brakes - Hydraulic Components (Page GR-47) FS III front brake calipers, servicing Front brake caliper piston, removing and installing FN 3 front brake calipers, servicing Front caliper piston, removing
Waveguide and Flange Data
Waveguide and lange ata The following table details the lann standard flanges. Most products are available with other flange styles and special langes requency Range (z) Waveguide esignation ritish W I
Instruction Manual. Alfa Laval SB Membrane Sample Valve ESE02963-EN1 2015-10. www.sks-online.com www.sks-webshop.com.
Instruction Manual Alfa Laval SB Membrane Sample Valve ESE02963-EN1 2015-10 Original manual Table of contents The information herein is correct at the time of issue but may be subject to change without
CSF16 and CSF16T Stainless Steel Steam Filters
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
! WARNING. Before using product, read and understand instructions.
McDonnell & Miller Installation & Maintenance Instructions MM-600G) Series FS8-W General Purpose Liquid Flow Switch OPERATION This control is an independently mounted water flow sensing device that makes
Thermostatic bar showers. Troubleshooting and maintenance
Thermostatic bar showers Troubleshooting and maintenance General Fault Diagnosis Outlet too cold Outlet too hot - Hot water supply must be 10ºC higher than desired mixed outlet for the mixer to operate
Chapter 6: Check Valves
Contents Chapter : Check Valves Series Description Size Mounting Page Parker Standard DIN / ISO 1/8 1/4 3/8 1/2 3/4 1 0 10 1 25 32 Shuttle valves SSR -2 Check valves, direct operated RK / R CS SPZE SPV
Safety for Hydraulics Leak free check valve, pilot operated, series ERV Cartridge type, two stage
Safety for Hydraulics Leak free check valve, pilot operated, series Cartridge type, two stage prevents a load from falling if a burst occurs in feed pipe hardened seat and poppet prevents creep of hydraulically
Valve systems Base plates, according to standard ISO 5599-1. Brochure
ISO 5599-1 Brochure 2 ISO 5599-1 Single subbase Single subbase, thread connections on the side standard: ISO 5599-1 Frame size: ISO 1 - ISO 4 compressed air connection output: G 1/4 - G 1 Reversed pressure
Float and Thermostatic Traps Series H, C and X
Hoffman Specialty Installation & Maintenance Instructions HS-(E) and Thermostatic Traps Series H, C and X Series C & NPT Series C NPT Series X NPT Series C NPT Series H Ratings Maximum Max. Operating NPT
Volkswagen New Beetle 2.0 Liter 4-cyl General, Engine (Engine Code AEG) 17 Engine-Lubrication system (Page GR-17)
17 Engine-Lubrication system (Page GR-17) Lubrication system components, removing and installing Oil pan, removing and installing Oil pressure and oil pressure switch, checking Dynamic oil pressure warning
Rotary Actuators, NAMUR interface VDI/VDE 3845 & ISO 5211 (ATEX certified) Series ARP
NORTH AMERICAN CYLINDER & ACTUATOR CATALOG > Release 8. Rotary Actuators and Grippers Rotary Actuators, NAMUR interface VDI/VDE 384 & ISO 211 (ATEX certified) Series ARP Model: Rack & Pinion - Rotational
Char-Lynn Hydraulic Motor. Repair Information. 10 000 Series. October, 1997
Char-Lynn Hydraulic Motor October, 1997 Repair Information Geroler Motor Two Speed 001 27 Retainer inside bore of valve plate bearingless motors only 4 15 16 3 6 35 Parts Drawing 25 2 2 1 19 17 36 40 47
Proportional Pressure Reducing Valves
Proportional Pressure Reducing Valves Technical Catalog KBX(C)G-6-1* KBX(C)G-8-1* Contents General Description Page 3 Typical Section Page 3 Functional Symbols Page 4 Model Codes Page 5 Operating Data
Q Series Piston Pumps Variable Displacement, Quiet Series for Industrial Applications
Q Series Piston Pumps Variable Displacement, Quiet Series for Industrial Applications Technical Catalog PVQ10 PVQ13 PVQ20 PVQ25 PVQ32 PVQ40 PVQ45 Table of Contents Introduction......................................................................................................
USA Headquarters. Dynex/Rivett Inc. 770 Capitol Drive Pewaukee, WI 53072 U.S.A. Tel: 262-691-2222 FAX: 262-691-0312 E-mail: sales@dynexhydraulics.
SPECIFICATIONS PF1000 Series Fixed Displacement Pumps Also refer to "Checkball Pump Installation and Operating Recommendations" Bulletin PSI.CB (dynexpumpinstallation.pdf) CONTACT INFORMATION USA Headquarters
ABV20 Air Actuated Boiler Blowdown Valve Installation and Maintenance Instructions
4057250/8 IM-P405-16 AB Issue 8 ABV20 Air Actuated Boiler Blowdown Valve Installation and Maintenance Instructions 1 General safety information 2 General product information 3 Installation 4 Operation
Telescoping Post Indicator Wall Post KENNEDY VALVE ISO 9000 ISO 14001
Telescoping Post Indicator Wall Post KENNEDY VALVE ISO 9000 ISO 14001 Telescoping Post Indicator 2945 A 1" SQUARE STEM 9" MAX. = 10" MIN. = 7" FIELD ADJUSTMENT INSTRUCTIONS 1. Remove the top section from
OPERATING and MAINTENANCE MANUAL SERIES 2700A CONTROL VALVE CONTENTS. INTRODUCTION...1 Scope...1 Description...1 Valve Identification...
OPERATING and MAINTENANCE MANUAL SERIES 2700A CONTROL VALVE CONTENTS INTRODUCTION...1 Scope...1 Description...1 Valve Identification...2 1.0 VALVE INSTALLATION...2 2.0 VALVE MAINTENANCE...3 Actuator Disassembly...3
Allspeeds Ltd. Royal Works, Atlas St Clayton le Moors Accrington Lancashire England BB5 5LW. Tel +44 (0)1254 615100
Allspeeds Ltd. Royal Works, Atlas St Clayton le Moors Accrington Lancashire England BB5 5LW Tel +44 (0)1254 615100 www.allspeeds.co.uk HOSE/UMBILICAL CUTTER HCV155 PRODUCT CODE No. 980217 INSTRUCTIONS
PILOT OPERATED PRESSURE RELIEF VALVE - Series VR4V
PILOT OPERTED PRESSURE RELIEF VLVE - Series VR4V The Veljan Pressure Relief Valve series VR4V are pilot operated and wk Internal Dra on the prciple of hydraulic balancg. These valves are used to limit
Series 30000 Hose Reels
Operating Instructions and Parts List for Series 30000 Hose Reels - MANUAL DRIVEN - - POWER DRIVEN - SAFETY PRECAUTIONS Personal injury and/or equipment damage may result if proper safety precautions are
RC 195 Multiple Input Receiver-Controller
Document No. 129-230 RC 195 Multiple Input Receiver-Controller Product Description The RC 195 Multiple Input Receiver-Controller is a pneumatic instrument that can be used as a one input (DA or RA), two