MCC. SMBJ5338B THRU SMBJ5388B

Transcription

1 omponents Marilla Street Chatsworth!"# $%!"# SMBJ5338B THRU SMBJ5388B Features Low Profile Package for Surface Mountiong(Flat Handling Surface for Accurate Placement) Zener Voltage 5.V to 200V High Surge Current Capability For Available Tolerances-see Note Available on Tape and Reel (see EA std RS-48) Lead Free Finish/Rohs Compliant (Note) ("P"Suffix designates Compliant. See ordering information) Halogen free available upon request by adding suffix "-HF" Mechanical Data Standard JEDEC Outlines as Shown Marking: See page 2 Maximum Temperature for Soldering: 260 for Seconds Epoxy meets UL 94 V-0 flammability rating Moisture Sensitivity Level Electrical 25 C Unless Otherwise Specified Forward Voltage at.0a Current Steady State Power Dissipation Operating and Storage Temperatures Thermal Resistance V F.2Volts P (AV) 5Watts See Note 2 T J, T STG R JL R JA -55 to /W 90 /W Note:.High Tempertaure Solder Exemptions Applied,see EU Directive Annex Lead temperature at 75 = TL at mounting plane. Derate linearly above 75 to zero power at Ambient temperature at 5 = TA at mounting plane. Derate linearly above 5 to zero power at 50 5 Watt Surface Mount Silicon Zener Diode 5. to 200 Volts DO-24AA (SMB) (Lead Frame) H G E J A D DIMENSIONS INCHES MM DIM MIN MAX MIN MAX NOTE A B C D E G H J B C SUGGESTED SOLDER PAD LAYOUT 0.090" Revision: J of 5 204/09/09

2 SMBJ5338B thru SMBJ5388B ELECTRICAL PART NUMBER REGULATOR V Z TEST I Z DYNAMIC IMPEDANCE Z ZT REVERSE I R TEST V R REGULATOR I ZM DYNAMIC KNEE IMPEDANCE Z SURGE I ZSM REGULATION VOLTS ma OHMS µa VOLTS ma OHMS A VOLTS SMBJ5338B SMBJ5339B SMBJ5340B SMBJ534B SMBJ5342B SMBJ5343B SMBJ5344B SMBJ5345B SMBJ5346B SMBJ5347B SMBJ5348B SMBJ5349B SMBJ5350B SMBJ535B SMBJ5352B SMBJ5353B SMBJ5354B SMBJ5355B SMBJ5356B SMBJ5357B SMBJ5358B SMBJ5359B SMBJ5360B SMBJ536B SMBJ5362B SMBJ5363B SMBJ5364B SMBJ5365B SMBJ5366B SMBJ5367B SMBJ5368B SMBJ5369B SMBJ5370B SMBJ537B SMBJ5372B SMBJ5373B SMBJ5374B SMBJ5375B SMBJ5376B SMBJ5377B SMBJ5378B SMBJ5379B SMBJ5380B SMBJ538B SMBJ5382B SMBJ5383B SMBJ5384B SMBJ5385B SMBJ5386B SMBJ5387B SMBJ5388B of 5

3 SMBJ5338B thru SMBJ5388B Marking Code Info. 369B Cathode Band Logo Type No. For Example: 339B for SMBJ5339B 369B for SMBJ5369B Note Devices listed have a ± 5% tolerance on nominal V Z. Suffix C denotes a +2% _ Note 2 Nominal Zener Voltage (VZ) is tested with a 40 +/- milliseconds pulse current at 25 Cto avoid self-heat affection. Note 5 The Maximum Zener Current (I ZM) shown is for ± 5% tolerance devices. I ZM for ± % and ± 20% devices can be calculated using the formula: I ZM = P V ZM Note 3 The Zener impedance (Z ZT or Z ZKis derived from the 60 H Z ac voltage, which results when an ac current having a rms value equal to % of the dc zener current (I ZT or I ZK) is superimposed on I ZT or I ZK respectively. Note 6 Where V ZM is V Z at the high end of the voltage tolerance specified and P is the rated power of the device. The Surge Current (I ZM) is specified as the maximum peak of a nonrecurring sine wave of 8.3 milliseconds duration. Note 4 The Maximum Reverse (leakage) Current is specified for devices with ± 20% and ± % voltage tolerances on nominal V Z in another column. Note 7 Voltage Regulation ( V Z) is the difference between the voltage measured at % and 50% I ZM). 3 of 5

4 RATING AND CHARACTERISTICS CURVES SMBJ5338B THRU SMBJ5388B PD, MAXIUMU POWER DISSIPATION (WATTS) TA TL θvz, TEMPERATURE COEFFICIENT (mv/ I ZT RANGE VZ, (VOLTS) TL,LEAD TEMPERATURE TA, AMBIENT TEMPERATURE Fig. -POWER TEMPERATURE DERATING CURVE Fig. 2-TEMPERATURE COEFFICIENT-RANGE FOR UNITS 6TO5VOLTS 00 IZ, ZENER (ma) 00 0 T C =25 T= VZ, ZENER (VOLTS) IZ, ZENER (ma) T= VZ, ZENER (VOLTS) Fig. 3-ZENER VERSUS ZENER VZ = 6.8 THRU VOLTS Fig. 4-ZENER VERSUS ZENER VZ = THRU 5 VOLTS 4 of 5

5 Ordering Information : Device Part Number-TP Packing Tape&Reel: 3Kpcs/Reel Note : Adding "-HF" suffix for halogen free, eg. Part Number-TP-HF ***IMPORTANT NOTICE*** Corp. reserves the right to make changes without further notice to any product herein to make corrections, modifications, enhancements, improvements, or other changes. Corp. does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights,nor the rights of others. The user of products in such applications shall assume all risks of such use and will agree to hold Corp. and all the companies whose products are represented on our website, harmless against all damages. ***LIFE SUPPORT*** 's products are not authorized for use as critical components in life support devices or systems without the express written approval of Corporation. ***CUSTOMER AWARENESS*** Counterfeiting of semiconductor parts is a growing problem in the industry. () is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. strongly encourages customers to purchase parts either directly from or from Authorized Distributors who are listed by country on our web page cited below. Products customers buy either from directly or from Authorized Distributors are genuine parts, have full traceability, meet 's quality standards for handling and storage. will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors. Revision: J 5 of 5 204/09/09