Industry seminar in Printed Intelligence on November 23-24, 2010 Oulu, Finland Listen to the needs from global brands and potential end-users Visit PrintoCent pilot factory and see what s available today Hear latest news from funding organizations, investors, companies and researchers Welcome to Prinse seminar from PrintoCent, an initiative led by VTT, Technical Research Centre of Finland. Prinse gives a realistic view where the industry and research is today in Printed Electronics and Printed Intelligence. This event is focused on collecting the most active parties in Printed Intelligence in the same event to discuss and share the views where and when to invest the resources at hand in order to get concrete results and take a step forward towards commercial product introduction. Prinse participation makes sense to all those who actively seek cooperation and ideas how to move forward in product R&D, manufacturing, commercialisation and strategic research. Learn what leading companies, e.g. Coca-Cola, Nokia, FIAT, Kimberly-Clark, AU Optronics and BASF have achieved today and what are their current expectations and plans with Printed Intelligence. Hear the latest messages from persons creating the EU strategy and development programs. Share views and opinions with representatives from leading research organisations. Seats to this event are limited to 200. Please register latest by Friday 12 th November 2010. Link to registration http://www.eventilla.com/prinse2010
Delegate information Key contacts: Ms. Sofia Liukkonen, Admin assistant, Tel. +358 44 567 7822 Mr. Matti Koivu, Event director, Tel. +358 400 544 376 Venue address: Oulu University, Pentti Kaiteran katu 1, 90590 Oulu and VTT, Technical Research Centre of Finland, Kaitoväylä 1, 90590 Oulu, Finland Registration: Registration desk is located in the front of Saalasti Hall hall at Oulu University. The registration desk is open from 8.30 on Tuesday, November 23 and will remain open for the duration of the conference. Badges: Each participant will receive a name badge which should be worn at all times during the conference. Attendees without a name badge will not be permitted entry. Your name badge is your entrance ticket to the reception at Oulu city hall. Internet: Free Internet access, PanOulu is available in Oulu city centre and at the venue. Accommodation: Special rates are available at Hotel Scandic Oulu, reserve here <link> Transportation: Flights to Oulu: Oulu airport is the second biggest in Finland has numerous daily connections to Helsinki and other cities. Major airlines serving Oulu are Finnair, Blue 1 and Air Baltic. From Seminar hotel to the Venue and back: A complimentary coach service is provided from Hotel Scandic Oulu to the conference venue and back.
Conference agenda for Tuesday, 23. November 2010 Chairman: Paul van der Schaaf, Chairman of the PrintoCent Strategic Advisory Board, BASF 8.30 Transportation to University of Oulu, Saalasti auditorium 8.30 Registration open, University of Oulu, Saalasti auditorium 9.00-9.15 Welcome & opening Olli Silvén, University of Oulu & Harri Kopola, VTT 9.15-9.50 Flexible displays, current status and future vision- Norio Sugiura, AUO 9.50-10.25 Material Development at BASF for Printed Electronics - Marcel Kastler, BASF 10.25-11.00 Printed diagnostics Jaakko Rissanen, Orion Diagnostica Oy 11.00-11.30 Transportation to VTT Oulu 11.30-11.45 Welcome to PrintoCent at VTT Janne Suhonen, VTT 11.45-12.45 Lunch served in PrintoCent Pilot factory and product demonstrator hall -possibility to visit both places during lunch break 13.00-17.15 Parallel Stream sessions 1. Printed Electronics and material development 2. Machinery, Automation & Measurements 3. Hybrid Systems and plastic integration 4. New Printed products
Draft agenda for Stream sessions on Tuesday, 23. November 2010 Stream session 1 13.00-15.00 Printed Electronics and material development Chair: Arto Maaninen, VTT 13.00-13.20 Printed Electronics: What s happening in PrintoCent today, Jukka Hast, VTT 13.20-13.50 Novel Electrochromic Materials for Printed Applications - Tero Mustonen BASF 13.50-14.10 Printed batteries, Risto Huvila/Marko Hanhikorpi, Enfucell Oy 14.10-14.30 Materials for Photovoltaics and Oleds, Ari Kärkkäinen, Braggone Oy 14.30-14.50 Barrier coatings for flexible and organic electronics by ALD, Mikko Söderlund, Beneq Oy 14.50-15.00 Summary and conclusions, Arto Maaninen, VTT Stream session 2 13.00-15.00 Machinery, automation and measurements Chair: Ilkka Kaisto, Micropolis Oy 13.00-13.15 PrintoCent Pilot factory, Mikko Paakkolanvaara, VTT 13.15-13.35 Concrete requirements and needs in display production- Alex SC Liu, AUO 13.35-13.55 What s new in assembly automation, Teijo Fabritius MAG Oy 13.55-14.15 Production Technologies for Printed Electronics, Thomas Kolbusch, Coatema GmbH 14.15-14.35 How to measure surface smoothness and transparent layer thickness on a moving track, Sauli Törmälä, Focal Spec Oy 14.35-14.50 Introduction to PrintoCent Manufacturing affiliate program, Esko Tahkola, Mesens Oy 14.50-15.00 Summary and conclusions, Ilkka Kaisto 15.00-15.30 Refreshments
Stream session 3 15.30-17.20 Hybrid Systems and plastic integration Chair: Sakari Kauppinen, Oulu University of Applied Sciences 15.30-15.45 Introduction to hybrid manufacturing, Kari Rönkä VTT 15.45-16.15 Integrated Smart Systems for efficient electrical mobility, Nello Li Pira, Fiat 16.15-16.40 Design and concept development, Jarno Vehmas, Nordloop 16.40-17.10 Challenges and opportunities in hybrid production, Timo Tarvainen, Elcoflex Oy 17.10-17.20 Summary and conclusions, Sakari Kauppinen Stream session 4 15.30-17.20 New Printed Products Chair: Matti Koivu, Oulu Innovation 15.30-15.45 What are key success factors in printed products, Jani-Mikael Kuusisto VTT 15.45-16.15 Printed Intelligence Applications Sridhar Ranganathan, Kimberly-Clark 16.15-16.45 New reading experience, Colin Risk, Imago Publishing 16.45-17.15 New packaging concepts, Juha Maijala, StoraEnso Oyj 17.15-17.20 Summary and conclusions, Matti Koivu, Oulu Innovation 17.30 Transportation to Hotel Scandic Oulu 19.00 Reception by City of Oulu, Oulu City Hall
Draft conference agenda for Wednesday, 24. November 2010 8.30 Transportation to University of Oulu, Saalasti auditorium Chair: Harri Kopola, VTT 9.00-9.30 How to adopt Printed Intelligence in branded beverages Mansoor Siddiqi, The Coca-Cola Company 9.30-10.00 Key Enabling Nanotechnologies for Conformal Mobile Devices - Paul Beecher, Nokia 10.00-10.30 Organic and Large Area Electronics in Europe - John Magan, European Commission, Photonics unit 10.30-10.45 Funding for printed intelligence related activities in Finland- Inkeri Huttu, Tekes 10.45-11.00 Invest in Finland Timo Antikainen, IIF 11.00-11.30 VC perspective to Printed Intelligence Chris Winter, New Venture Partners 11.30-11.45 Summary and conclusions, Harri Kopola, VTT 11.45-12.30 Lunch 12.30 Transportation to Oulu Airport