AC SERIES DUAL 1/4 (6.35mm) / XLR
|
|
|
- Meredith York
- 8 years ago
- Views:
Transcription
1 AC SERIES DUAL 1/4 (6.35mm) / XLR The AC Series C type chassis receptacles feature two connectors in the one space saving housing. A combined XLR female receptacle together with a 6.35mm (1/4 ) phone jack give the designer more flexibility ensuring premium board space is saved. The new low profile high density C type offers a 15% space saving over the traditional C type. Various configurations are available in either stereo or mono layouts with Vertical, Horizontal Printed Circuit Board or Solder contacts. Features Standard or low profile / high density shell design Two connectors in the one housing. Industry standard PCB footprint layout on standard C type. Vertical or mounting. Bulk packed. Positive latch lock system (XLR). Options Ordering Codes We have listed the more common ordering codes in each section. For further options please refer to the part number breakdown charts. Please contact us if you need any further assistance. Simple steps to guide you in using this catalogue 1) Identify the product group listed in Contents on page <?> and go directly to that page number. 2) Each product group cover page then details information and options available. 3) Refer to the product detail pages and identify the product you require pictorially. 4) Read the product description column for the products standard features. 5) Use variations column to determine your choice. 6) Identify part number. 7) In the event the particular option you require is not listed please refer to the part number breakdown page at the end of each section. 8) Please contact us directly if you have any further problems. Solder contacts Vertical PCB contacts contacts aging Overmoldable connector housing 2
2 NEW ITEM AC SERIES CHASSIS CONNECTORS C - TYPE LOW PROFILE DUAL JACK / XLR CONNECTORS Features: Two connectors in the one housing. Low profile design offers a 15% space saving over the traditional design. Vertical or mounting. Bulk packed in trays, 100 to a box as standard. Positive latch lock system (XLR). 1/4 mount, ACJC6AH mount, jack, mount, ACJC6AHL ACJC6AV ACJC6AVL ACJC9AH jack, mount, ACJC9AHL 3
3 NEW ITEM AC SERIES CHASSIS CONNECTORS jack, Vertical PCB mount, ACJC9AV 1/4 jack, Vertical PCB mount, ACJC9AVL 1/4 jack and switching ground mount, ACJC10AH 1/4 jack and switching ground mount, ACJC10AHL 1/4 jack and switching ground ACJC10AV 1/4 jack and switching ground ACJC10AVL 4
4 C - TYPE DUAL JACK / XLR CONNECTORS Features: Two connectors in the one housing. Space saving design. Industry standard PCB footprint layout. Vertical or mounting. Bulk packed in trays, 100 to a box as standard. Positive latch lock system (XLR). Part Number Breakdown: page 8 Specifications: page 10 PCB Footprints: page 9 Recommended Fastener: page 137 mount, ACJC5H mount, ACJC5HL ACJC5V ACJC5VL ACJC5S ACJC5SL 5
5 mount, ACJC6H mount, ACJC6HL ACJC6V ACJC6VL ACJC6S ACJC6SL jack, mount, ACJC9H jack, mount, ACJC9HL 6
6 PRODUCT - FIGURE DESCRIPTION VARIATIONS PART NUMBER jack, Vertical PCB mount, ACJC9V jack, Vertical PCB mount, ACJC9VL jack, ACJC9S jack, ACJC9SL jack mount, jack mount, jack jack ACJC10H ACJC10HL ACJC10V ACJC10VL 7
7 jack jack receptacle with 1/4 jack, Overmoldable Connector Housing and Non-latching options avaliable ACJC10S ACJC10SL ACJC9M PART NUMBER BREAKDOWN AC SERIES THERMOPLASTIC C TYPE E. G. ACJC5HL AC (Series Prefix),JC Jack/Connector XLR, 5 Mono, Horizontal Printed Circuit Board, Latchless, aged. SERIES PREFIX CONNECTOR TYPE HOUSING TYPE CONTACT OPTIONS CONTACT ORIENTATION PACKAGING LOCKING MECHANISM AC JC 5 H L SERIES PREFIX CONNECTOR TYPE CONTACT OPTIONS HOUSING TYPE CONTACT TYPE AC JC Blank A M H S Series Prefix LOCKING Blank MECHANISM L Latchless PACKAGING Blank Jack / Connector XLR 5 Mono, Non Switching, XLR Grounded 6 Stereo, Non Switching, XLR Grounded 9 Stereo, Switching, 10 XLR Grounded Stereo, Switching, XLR with Ground Switch V Standard Low Profile / High Density Overmold Housing Vertical Printed Circuit Board Horizontal Printed Circuit Board Solder Contacts Individual Bags ed 8
8 AC SERIES C TYPE SERIES ACJC5H & ACJC5HL ACJC5V & ACJC5VL ACJC6H & ACJC6HL ACJC6V & ACJC6VL ACJC9H & ACJC9HL ACJC9V & ACJC9VL ACJC10H & ACJC10HL ACJC10V & ACJC10VL ACJC6AH & ACJC6AHL ACJC6AV & ACJC6AVL ACJC9AH & ACJC9AHL ACJC9AV & ACJC9AVL ACJC10AH & ACJC10AHL ACJC10AV & ACJC10AVL C TYPE PANEL CUTOUT C TYPE MOUNTING PITCH C TYPE LOW PROFILE PANEL CUTOUT C TYPE LOW PROFILE MOUNTING PITCH 9
9 STANDARD DATA C TYPE CHASSIS RECEPTACLES VALUE LOW PROFILE TYPE STANDARD C TYPE GENERAL CHARACTERISTICS Number of contacts 5, 6, 9 or 10 Termination Printed Circuit Board (PCB) Printed Circuit Board (PCB) or Solder Bucket ELECTRICAL CHARACTERISTICS CLIMATIC CHARACTERISTICS Flammability Environmental Service Voltage RMS Test Voltage AC RMS Current carrying capacity Typical Contact Resistance Insulation Resistance (initial) Insulation Resistance (after damp heat test) Protection Class Operating Temperature UL 94HB Complies with EU RoHS 2 Directive 2011/65/EU 50V 1500V 7.5A 50mΩ > 0.5GΩ > 0.2GΩ IP40-25 C to +70 C MECHANICAL CHARACTERISTICS Weight** separating force 9.2g (0.02lb) 20N 14g (0.030lb) Mounting Screw torque max. 1.5Nm Mechanical Operations 1500 mating cycles Fastening*** Self-Tapping PT screw with thread 2.9 x 1.06 and of Tri-rondular configuration MATERIALS Connector Shell Shell Finish Insulators PA % glass fibre reinforced, UL94HB PA6.6 glass fibre reinforced, UL94HB PA % glass fibre reinforced, UL94HB Black PA % glass fibre reinforced, UL94HB XLR Contact Material Plating Bronze Gold over Nickel plated Jack Contact Material Plating Bronze Gold over Nickel plated Brass Silver over Copper plated Latch lock and Spring Ground element Nickel Plated Nickel Plated Silver over Copper plated Rev 6-03/2013 **Approximate weight in grams not including packaging. Please contact us for exact weight for shipping purposes. ***Refer to page
AC SERIES-C TYPE DUAL CONNECTORS JACK/XLR
AC SERIES-C TYPE DUAL CONNECTORS JACK/XLR The AC Series C type chassis receptacles feature two connectors in the one space saving housing. A combined XLR female receptacle together with a 6.35mm (1/4 )
ISO VIEW OF AX SERIES XLR CABLE CONNECTOR
ISO VIEW OF AX SERIES XLR CABLE CONNECTOR One piece ground / latch spring design incorporating twin wipe contacts for a direct connection path from mating shell to ground providing enhanced connection
Amphenol C 091 A/B/D. Circular Connectors. Amphenol-Tuchel Electronics GmbH
Amphenol C 091 A/B/D Circular Connectors Amphenol-Tuchel Electronics GmbH C 091 A Main Features Metal threaded coupling acc. to IEC. Number of contacts are 2 to 8, 12 and 14. Internal metal strain relief
AC Z SERIES XLR METAL CHASSIS MOUNT CONNECTORS
AC Z SERIES XLR METAL CHASSIS MOUNT CONNECTORS The metal chassis mount Z series connectors are designed for the audio user where durability, reliability and strength across a wide range of applications
Mini USB and USB 2.0-IP67 Connector System
Mini USB and USB 2.0-IP67 Connector System Section 12 Mini USB and USB 2.0-IP67 Connector System CONEC has added the Mini-USB connector. This Mini-USB IP67 receptacle and plug family, feature a bayonet
TINY xlr... 4. Plugs... 6. Jacks... 8. Phono "RCA" & DIN Connectors... 10. Patch Box & Stage Box... 12. Dual Banana Plug... 14. Technical Data...
Product Guide 2010 C o n t e n t P a g e TINY xlr... 4 Plugs... 6 Jacks... 8 Phono "RCA" & DIN Connectors... 10 Patch Box & Stage Box... 12 Dual Banana Plug... 14 Technical Data... 15 2 R E A N With the
2S-Series Sub-Miniature Toggle Switches
Carling Technologies S-Series Sub-Miniature Toggle Switch SS-Series Sealed Sub-Miniature Toggle Switch SM-Series Sealed Surface Mount Sub-Miniature Toggle Switch S-Series Ordering Scheme Specifications
Jack to Jack adapters Plug to Plug U-Link connectors PCB Right angle plastic PCB Right angle - metal. Ordering Codes
BNC 75Ω RF CONNECTORS BNC 75Ω RF CONNECTORS To meet the need for higher performance, impedance matched cable interconnections, Amphenol offers a full line of 75 ohm BNC connectors. These connectors can
Universal MATE-N-LOK Connectors
Product Facts Pins and sockets can be intermixed in the same housing Positive polarization Rear cavity identification completely enclosed in housings Positive locking housings Insulation capability to.00
08. SEK IDC CONNECTORS
. IDC CONNECTORS connectors for flat cables enable simple and, cost-optimized device configuration. connectors are preferably used for connection within the device. HARTING offers a broad range of these
SOURIAU s discrete wire sealing
SOURIAU s discrete wire sealing Description Using proven grommet technology from SOURIAU s extensive knowledge of harsh environments, the UTO & UTS connectors with grommet garantie a discrete wire sealing
1000 Series Miniature Slide Switches
Miniature Switches Features/Benefits Variety of actuators and terminations Panel mount tabs available Epoxy terminal seal compatible with bottom-wash cleaning RoHS compliant Typical Applications Test &
3M Mini D Ribbon (MDR) Connectors.050 Surface Mount Right Angle Receptacle - Shielded 102 Series
M Mini D Ribbon (MDR) Connectors.050 Surface Mount Right Angle Receptacle - Shielded 102 Series Wiper-on-wiper contact for reliable repetitive plugging Ultra-low signal skew for high data rate transmission
400 Series Buccaneer BUCCANEER POWER. bulgin
bulgin BUCCANEER FOR POWER Contact Retainer Sealing Gasket O Ring Contacts Locking Ring Retaining Nut Panel Body Contacts Contact Carrier O Ring Main Body Cable Gland Collet Gland Nut Sealed to IP68 when
.093 [2.36] Commercial Pin and Socket Connectors
![.093 [2.36] Commercial Pin and Socket Connectors](/thumbs/40/21560042.jpg ".093 [2.36] Commercial Pin and Socket Connectors")
Product Facts Polarized Cavity identification Low contact-mating force Dual locking lances Detent and positive locking Contacts available in brass and phosphor bronze with tin and gold plating Panel mounting
QM (1.78mm-.070") CONNECTORS-"MICRO 70"
QM (1.78mm-.070") CONNECTORS-"MICRO 70" General Designed to fill the needs of high density and miniature interconnection, the QM series are Super-Small IDC Connection. This IDC plug uses I/O Cable
Directory chapter 02 - DIN Power (to 6 A) Types D, E, F, FM, 2F, F9, interface connectors I/U 02. 01. Technical characteristics types D and E... 02.
Directory chapter 02 - () Types D, E, F, FM, 2F, F9, interface connectors I/U Page Technical characteristics types D and E.............................. 02.10 Type D connectors.................... 02.11
CONEC SnapLock. 1 Introduction
CONEC SnapLock E L E C T R O N I C C O N N E C T O R S 1 Introduction The new CONEC SnapLock locking system consists of D-SUB connectors and D-SUB hoods allowing quick and safe locking without any additional
NYS216. Technical Information. Product. Electrical. Mechanical. Material. Environmental. Product specific
NYS216 3 pole horizontal 1/4'' jack, all contacts switched, plastic housing with nut and washer Technical Information hide Product Title NYS216 Electrical Dielectric strength Insulation resistance Rated
SMZ type 43 INTRODUCTION. The Radiall Type 43 coaxial connector range. Type 43 series - Features and benefits
INTRODUCTION The Radiall Type 43 coaxial connector range The Radiall range of Type 43 series connectors is fully approved (where applicable) to BT (British Telecom) standards as well as to British Standard
3M Serial Attached SCSI (SAS) Connector Boardmount Compliant Pin and Surface Mount, Vertical Receptacle
M Serial Attached SCSI (SAS) Connector 6 Gbps input/output connector for backplane applications Two contact mating levels for early-mate and latebreak allows blind mating or hot swap applications Capable
Two Position Cable-to-Board Power Connector System (Right Angle/Straight) with Coding Contacts
Product Specification 108-19346 17 APR 2013 Rev F Two Position Cable-to-Board Power Connector System (Right Angle/Straight) with Coding Contacts 1. SCOPE 1.1. Content NOTE The product may not perform according
This product can be assembled to the baseplate maintaining 5 mm center-to-center spacing. Thus any number of poles can end-to-end stack.
page 1/5 Plug-in Screw Connector System for Printed Circuit Boards 950-NLFL-DS 5.00 mm (0.197 in) Spacing - 2-12 poles PICTURES 950-NLFL-DS 950-NLFL & 971-SLK TECHNICAL INFORMATION Description This two
AmphenolR. Now you're connected!
Table of Contents CoolPower Overview... Page 3 CoolPower Slim Drawer - DW Series... Page 4 CoolPower D-Sub - LCC17 Series... Page 7 Amphenol Power Solutions... Page 9 Other Amphenol Commercial Products...
Sealed Industrial Ethernet Circular IP67 Cat. 5e RJ45 Connector System
Revised Sept--22-2009 Sealed Industrial Ethernet Circular IP67 Cat. 5e RJ45 Connector System Description The sealed circular RJ45 connector system is designed for use in harsh environments. The connector
Standard Buccaneer - USB
IP68 rated USB version 2.0 performance Plug and play capability Visual mating indication Shielded system Single and double ended cables Screw coupling PCB versions Dust and waterproof sealing when mated
Selector Switch Type 08
Compact and versatile 2 positions multi wafer selector switch For PCB mounting 25,000 switching cycles with up to 9.0 Ncm switching torque Gold plated contacts: micron Robust metal housing with metal shaft
CIN::APSE MICROMINIATURE D-SUB
INTRODUCTION CINCH has been producing filter connectors for years and has acquired an in depth knowledge of EMC protection. CINCH offers fast delivery on a wide range of standard filtered connectors and
7000 Series Buccaneer
The all plastic and metal construction of the - circular that combine the ease of use of a quick coupling mechanism with proven environmental sealing for signal and mains power. Designed and independently
ZIF Connector & Flat Flexible Cable
ZIF Connector & Flat Flexible Cable 09/08-1 ZIF Connector & Flat Flexible Cable As the demand for higher density in electronic equipment increases, the use of Flexible Flat Cable (FFC) or Flexible Printed
400 Series - Mini USB Buccaneer
IP68 Sealed IP68 rated USB V2.0 performance Plug and play capability Shielded system Overmoulded cables Screw coupling PCB versions Dust and waterproof to EN60529 Data rates up to 480Mbs Hot pluggable,
INNOVATION SUPPORTED BY A TRULY SOLID INDUSTRIAL ORGANIZATION.
CONNECTORS 2014 INNOVATION SUPPORTED BY A TRULY SOLID INDUSTRIAL ORGANIZATION. Stelvio Kontek S.p.A. is one of the leading groups in the connectors market. With a solid background in the sector and having
Cannon, VEAM, BIW. A Historical Achievement of Technology Leadership. Defining and Championing Innovation
Cannon, VEAM, BIW A Historical Achievement of Technology Leadership Defining and Championing Innovation Showcasing a portfolio of creativity, ITT s Engineered For Life execution embraces products which
SD Memory Card Connectors
SD Memory Card Connectors DM Series Withstands higher force of card insertion. Card Standard type Metal cover extends over the back of the connector. Features. Withstands higher force of card insertion
SFP Single Port Multi-Port Ganged
Single Port Multi-Port Ganged Amphenol s SFP connector series is a 20 position connector and cage combo for mounting to a host PCB with a metal cage enclosing the connector. These connectors are similar
PAM Connectors. PAM Bayonet Connectors
PAM Bayonet Tel : 33 (0)1 60 84 21 40 Fax : 33 (0)1 60 84 43 81 info@bernier.tm.fr www.bernier.tm.fr Overview Miniature audio connectors with bayonet locking system, equipped with 07 or 10 contacts, and
.062 [1.57] Commercial Pin and Socket Connectors
![.062 [1.57] Commercial Pin and Socket Connectors](/thumbs/40/21560048.jpg ".062 [1.57] Commercial Pin and Socket Connectors")
Pin and Socket onnectors MP Product Facts Polarized avity identification Low contact-mating force Dual locking lances Detent and positive locking ontacts available in brass and phosphor bronze with tin
IEC Connectors. Introduction
Introduction IEC Connectors A full range of quality mains rated inlets, outlets and connectors conforming to IEC and EN 60320 specifications carrying UL, CSA, VDE and other approvals. With electrical ratings
6000 Series Buccaneer. 30 twist locking Tamperproof lock prevents accidental un-mating. Cat 5e shielded coupler Maintains shielding
circular connectors that combine the ease of use of a push/pull coupling mechanism with proven environmental sealing. Available with metal or plastic bodies, the range supports both data (USB and Ethernet),
Directory chapter 04
M Directory chapter 04 D-Sub Mixed subminiature D connectors New Page D-Sub mixed connector system general information................... 04.02 Contact arrangements............................................
Physical. Electrical. Environmental. Insulation: Contact: Plating: Temperature Rating: -55 C to +85 C
M I/O Interconnect System 2.0 mm for IEEE 194 Wiremount Receptacle (Female) E206 Series Designed to mate to all M I/O Interconnect System 2.0 mm for IEEE 194 Boardmount Plugs Polarized to provide proper
www.jinda-china.com JD15-3001 A:3.5mm mono plug to 2 3.5mm mono jacks B:3.5mm mono plug to 2 3.5mm stereo jacks JD15-3002 A:3.
CONTENT AUDIO ADAPTOR AUDIO ADAPTOR 1-6 JD15-3001 A:3.5mm mono plug to 2 s B:3.5mm mono plug to 2 s JD15-3008 A: to 2 s B: to 2 s JD15-3015 3.5mm mono plug to 2 s 2.5/3.5/6.35MM PLUGS 7-10 JD15-3002 A:
Selector Switch Type 01
Selector Switch Type 0 Compact positions selector switch,000 switching cycles with up to.0 Ncm switching torque Gold plated contacts: micron Robust metal housing with metal shaft Optional IP front panel
Operating Temperature Range: -30 to +85ç (Note 1) Operating Humidity Range: 40 to 80%
All non- products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website search at www.hirose-connectors.com, or contact your Hirose sales representative.
SMS - Qikmate. Performance characteristics
- Qikmate Qikmate panel and cable connectors Description The versatile Qikmate panel and cable connectors are a highly cost-effective system approach to solving the constant demand for more cost effective
AMP. 5.0 mm Power Key Connectors (5.0 PKC) (Wire-to-Board) Soft Shell Pin and Socket Connectors. Product Facts. Standard Density
5.0 mm Power Key Connectors (5.0 PKC) (Wire-to-Board) Product Facts Compact design with 19.4 mm mated height Power circuit connector with 5.0 mm contact centerline Wire-to-board connectors consisting of
600H and 600NH series
600H and 600NH series Toggle switches - high amperage Distinctive features and specifications Construction Terminal and contact support are manufactured from a single piece of metal. The contacts are resistance-welded
HALO H27RICT. 6" RECESSED DOWNLIGHTING Incandescent. eliminate need for separate wire nuts - simply strip supply wires and push in
6" Aperture IC Insulated Ceiling Shallow Ceiling Remodel Housing 120V Line Voltage RECESSED DOWNLIGHTING For use in shallow ceilings with 2 x 6 joist construction Can be installed from below finished ceiling
UTS discrete wire sealing
Technical characteristics Mechanical Durability: 250 matings & unmatings Vibration resistance: Sinusoidal vibrations per CEI 605-4 - from 10 to 2000 Hz Thermal shock: 5 cycles 30 min. from -40 C to 105
Switches SWITCHES SWITCHES
Switches Manufactured from Stainless Steel, Bulgin s extensive range of vandal resistant security switches are designed with a high resistance to wear and tear, corrosion and harsh use in potentially hostile
A Series 1-4 Pole Rotary Switches
1-4 Pole Switches Features/Benefits Multi-pole and multi-position Positive detent Shorting & non-shorting contacts Panel and PCB mounting RoHS Compliant Typical Applications Automotive Major and small
The Wild Children of D38999
micro38999 Series High Vibration Miniature Connectors The Wild Children of D38999 A complete range of space saving compact connectors with all of the features and capabilities of D38999 for harsh applications.
Micro-USB connectors meeting requirements of USB 2.0 Standard
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
Micro-USB connectors meeting requirements of USB 2.0 Standard
NEW Micro-USB connectors meeting requirements of USB 2.0 Standard ZX Series Note: Contact us to ascertain whether a TID number has been acquired for an individual product. Overview Extremely small high
SC-1000/2000 ROTARY CODED SWITCHES FEATURES PART NUMBER DESIGNATION S C - 1 0 1 0 T B. RoHS compliant
SC-00/2000 RoHS compliant INTERNAL STRUCTURE SC-00 / 2000 series 4 2 3 6 FEATURES BC RoHS compliant Fine click with metallic spring Low profile of 3.9 mm makes perfect for high density board mounting applications
SIL Resistor Network. Resistors. Electrical. Environmental. L Series. Thick Film Low Profile SIP Conformal Coated Resistor Networks RoHS Compliant
Resistors SIL Resistor Network Thick Film Low Profile SIP Conformal Coated Resistor Networks RoHS Compliant All parts are Pb-free and comply with EU Directive 2011/65/EU (RoHS2) Electrical Standard Resistance
STANDARD MICRO-D CONNECTORS
STANDARD MICRO-D CONNECTORS RECTANGULAR CONNECTORS Pigtail connector - Metal shell.............................. 56 Pigtail connector - Low profile - Metal shell.................... 58 Pigtail connector
FEATURES. Catalog C-031 Rev. H
FEATURES Average power contact resistance is less than 0.001 ohms Average signal contact resistance is less than 0.005 ohms RoHS compliant Catalog C-031 Rev. H - The Leader in Power Connector Solutions
Magnetic and Hydraulic-Magnetic Circuit Breaker 8340-G2...
Magnetic and Hydraulic-Magnetic Circuit Breaker 840-G2... Description Single, two and three pole magnetic circuit breakers with trip-free mechanism and push/pull on/off manual actuation. A choice of fast
Fakra. Coaxial connectors. DC 6 GHz
C-Blue D-Bordeaux GPS application GSM/Mobil Phone The FAKRA (Automobile Expert Group) has therefore defined a standardised connector system for the various communication applications in cars. Our FAKRA-compliant
MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors
MP Economy Power (EP) Connectors Table of Contents 2 Introduction This catalog has been designed to assist you, our customer, identify products to satisfy your connector needs for printed circuit board
USB3.0 Micro-B Connector
USB3.0 Micro-B Connector ZX360 Series General The ZX360 Series is a Micro-USB connector that is compliant with the MicroUSB 3.0 specifications and supports up to 5Gbps high speed data transmission. As
FASTON Terminals and Connectors
Introduction Product Facts Straight, right-angle and receptacle-tab combinations available Receptacles available for 6.3 mm, 4.8 mm and 2.8 mm tab size (.250,.187 and.110 Series) Receptacles mate with
SERIES 1800 - SINGLE POLE AND DOUBLE POLE ROCKER SWITCHES UP TO 12 (4) A 250 V~ AND 8 (8) A 250 V~
SERIES 1800 - SINGLE POLE AND DOUBLE POLE ROCKER SWITCHES UP TO 12 (4) A 250 V~ AND 8 (8) A 250 V~ PRODUCT ADVANTAGES Switching principle with long life endurance due to a low friction contact system (ball),
Now Available in Black Zinc Nickel
847/848 Series Power Supply up to 63 Now vailable in lack Zinc Nickel The 847/848 bayonet Series has been especially designed for light and harsh environment. Its physical characteristics and performances
picomax The Pluggable Connection System
picomax The Pluggable Connection System TECHNOLOGY THIS SPECIALIZED CAN T MEET ALL REQUIREMENTS. YES IT CAN. CONTENTS picomax Pin spacing: 3. mm/0.138 in;.0 mm/0.197 in; 7. mm/0.29 in Versatile Pluggable
PA5. Series. Quick-Connect Cables with Connectors. Simplifies sensor wiring. Wide variety of connectors attached to cables.
Quick-Connect Cables with Connectors PA Simplifies sensor wiring. Wide variety of connectors attached to cables. Series No wiring or staking work needed Shorter replacement time in unlikely event of sensor
ANOISON HPQN SERIES HPQN CONNECTORS INTERFACE DIMENSIONS. Description. Interface Dimensions 21 Characteristics
SERIES HPQN CONNECTORS DESCRIPTION CONTENT Designed by James Qu at Anoison in 2006, the HPQN is a quick locking version of the widely used type N connector. By replacing the threaded interface of the original
CMD Series. 4 Contact Row High Density Signal Connectors. Technical Characteristics
MD Series 4 ontact Row High Density Signal onnectors Offset-grid layout, four rows within dielectric connector body, mm center-to-center spacing in each row and row-to-row spacing. 0.6 mm nominal pin DI
Standard Buccaneer - Ethernet
IP6 rated compliant PUR jacket on cable Shielded system shielded coupler Shroud on RJ45 Screw coupling Rewireable flex connector PCB mounted panel connector IDC termination panel connector Earth lead version
Series Connectors for PCB
HE 8 / 127 Series Connectors for PCB MAIN CHARACTERISTICS Main features The 127 series circuit board connectors are available in 3 different versions: HE 801 / 127: E 301/B From 17 to 144 signal contacts,
General Specifications
General Specifications Electrical Capacity (Resistive Load) ower Level (silver): 0.A @ 0V DC Logic Level (gold): 0.VA maximum @ 8V AC/DC maximum (Applicable Range 0.mA ~ 0.A @ 0mV ~ 8V) Note: Find additional
14 PHOENIX CONTACT Courtesy of Power/mation. 1310 Energy Lane, Saint Paul, MN 55108. info@powermation.com - 800-843-9859 - www.powermation.
14 PHOENIX CONTACT PLUSCON circular is a circular connector for use in industrial automation. The range of design sizes available is varied, starting with the design sizes M5 to M8 and M1, for sensor/actuator
W1 Connector W1 Adapter W1 Termination
Data Sheet W1 Connector W1 Adapter W1 Termination DC to 110 GHz A complete coaxial connector system with mode-free performance to 110 GHz Features Excellent RF Performance to 110 GHz 50Ω Impedance Low
0.8 U N /0.5 U N 0.8 U N /0.5 U N 0.8 U N /0.5 U N 0.2 U N /0.1 U N 0.2 U N /0.1 U N 0.2 U N /0.1 U N
55 Series - General purpose relays 7-10 A Features 55.12 55.13 55.14 Printed circuit mount, general purpose 2, 3 & 4 Pole relays 55.12-2 Pole 10 A 55.13-3 Pole 10 A 55.14-4 Pole 7 A AC coils & DC coils
SMA Connectors. RF Coax Connectors. Product Facts
SMA Connectors Product Facts Performance to 12.4 GHz and beyond Available in various base metal options, including stainless steel, brass and zinc diecast Uses industry standard crimp tools and processes
General Purpose Relays Accessories. Accessories Miniature Relay PT
Miniature Relay PT n Easy replacement of relays on a densely packed DIN rail n No reduction of protection class or creepage/clearance with plastic retainer n Plug-in indicator- and protection modules n
AMP Soft Shell Pin and Socket Connectors
Soft Shell Pin and Socket Connectors Restriction on the use of Hazardous Substances (RoHS) t Tyco Electronics, we re ready to support your RoHS requirements. We ve assessed more than 1.5 million end items/components
How to Order : Power Connector
How to Order : Power Connector Power Connector 89 90 XXX - XX X X X X - X X X XXX SPECIFICATIONS No. Specifications Standard Value Style A For Cable with S/R B For Cable without S/R P For Panel Front Mounting
PCI EXPRESS CARD EDGE G630E Series
GENERAL INTRODUCTION The PCI Express is a new serial I/O technology that is compatible with the current PCI software environment. It provides low-cost, scalable performance for the next generation of computing
PRODUCTS SPECIFICATION
PRODUCTS SPECIFICATION ************************************************************************************** Description : DVI Connector Customer : COMOSS P/N : DV Series Date of Issue : 20-Sep-2002 Version
01. HARTING RJ INDUSTRIAL RJ45 ETHERNET CONNECTORS
. HARTING RJ INDUSTRIAL ETHERNET CONNECTORS Ethernet is is coming up to standard industrial interface. Therefore, automation devices such as controllers, sensors and actuators feature possess on one or
XG2. Flat Cable Connectors for PCBs. Achieve Total Cost Reduction through High-density Mounting and Reduced Wiring. Terminal Arrangement
Flat Cable Connectors for PCBs XG2 Achieve Total Cost Reduction through High-density Mounting and Reduced Wiring IDC connections allow you to wire all terminals at once without terminating the cable. Can
TEST SOLUTIONS CONTACTING - SEMICONDUCTOR
ENGINEERED TO CONNECT CONTACTING - SEMICONDUCTOR TEST SOLUTIONS SPECIFICATIONS AND DRAWINGS ARE SUBJECT TO ALTERATION WITHOUT PRIOR NOTICE - DIMENSIONS IN MILLIMETER CONTACTING - SEMICONDUCTOR 3 SEries
Quick Reference Guide AMP CT Connector Series
Quick Reference Guide The AMP CT connectors are a miniature wire-to-board and wire-to-wire interconnect solution. The AMP CT connector series has proven performance in its harness making capability. A
Mounting Instructions for SP4 Power Modules
Mounting Instructions for SP4 Power Modules Pierre-Laurent Doumergue R&D Engineer Microsemi Power Module Products 26 rue de Campilleau 33 520 Bruges, France Introduction: This application note gives the
3M Pin Strip Header Single and Dual Row.100,.235 /.318 Mating Length, Straight & Right Angle, Solder Tails 929 Series
M Pin Strip Header Single and Dual Row.100,.25 /.18 Mating Length, &, Solder Tails 929 Series Stackable Gold, Matte Sn, or -Lead plating options High Temperature (PCT) plastic for Wave or IR soldering
0.2 mm Pitch, 0.9 mm above the board, Flexible Printed Circuit ZIF Connectors
0.9 0.2 mm Pitch, 0.9 mm above the board, Flexible Printed Circuit ZIF Connectors FH43B Series Space saving 17.8mm(81 pos. shown) 2.77 Can be mounted over conductive traces. Features 1. Low-profile, small
EPIC CIRCON M23 Series Circular Signal Connectors
Circular Signal Connectors CIRCON M2 circular signal connectors are designed to DIN specification N698 and have a standard M2 threaded connection housing. They are offered in coupler, connector, and panel
Trident Connector Family Offers the Versatility and Reliability Required in Industrial & Transportation Applications
Trident Connector Family Offers the Versatility and Reliability Required in Industrial & Transportation Applications Industrial and transportation applications require robust connections with superior
D2SW-P. Sealed Subminiature Basic Switch. Ordering Information
Sealed Subminiature Basic Switch Sealed Basic Switch with Simplified Construction, Mounting Compatible with SS and D2SW Series. Sealing by using rubber packing means the switch can be used in dust-proof
Figure 1 (end) Updated document to corporate requirements Added text to Paragraph 2.4
This specification covers the requirements for application of ELCON Drawer Series Connectors: True Hot Plug, Blind Mating Mixed Signal and Power Connectors. These connectors are designed for use in pluggable
COAXICON Contacts. RF Coax Connectors. Product Facts
COXICON Contacts Product Facts Tyco Electronics provides a variety of contacts for coaxial connectors Contacts are available in a range of sizes that may be used with the various types of coaxial cable
2010-2011. Shortform Catalogue. Solutions for appliance & electronic applications. rocker switches. lever. switches. push. switches.
2010-2011 Solutions for appliance & electronic applications Shortform Catalogue rocker lever push vandal resistant slide door snap-action & safety rotary IEC sockets fuseholders indicators A trading name
Outside Plant Precision Cooling Site Monitoring and Services
Emerson Network Power Connectivity Solutions Johnson 299 Johnson Avenue Waseca, MN 56093 USA Tel: 800.247.8256 Fax: 507.833.6287 www.emersonnetworkpower.com/connectivity About Emerson Network Power Connectivity
ONE OF THE SMALLEST SNAP-ACTION SWITCHES IN THE WORLD. FEATURES Superminiature type, light-weight snap action switch PC board terminal type (0.
ONE OF THE SMALLEST SNAP-ACTION SWITCHES IN THE WORLD SWITCHES FEATURES Superminiature type, light-weight snap action switch PC board terminal type (0.2g) Solder terminal type with mounting holes (0.3g)
6000 Series Buccaneer
Robust, instant connections for harsh environments 6000 Series Buccaneer - circular connectors that combine the ease of use of a push/pull coupling mechanism with proven environmental sealing. Available
AMPSEAL* Automotive Plug Connector and Header Assembly
AMPSEAL* Automotive Plug Connector and Header Assembly Application Specification 24 SEP 97 Rev E All dimensions are given in millimeters unless otherwise specified. All dimensional tolerances are +0.2
RoHS. AMPMODU Interconnection System. European Standard Products. Ready
RoHS Ready AMPMODU Interconnection System European Standard Products 1 TYCO ELECTRONICS TECHNOLOGY PORTFOLIO Connector Systems / Electromechanical Components Relays Wireless Antennas, GPS Antennas, Integrated
PRODUCT SPECIFICATION
ipass TM / ipass+ TM 0.8 mm PITCH I/O CONNECTOR SYSTEM EXTERNAL ipass / ipass+ of TABLE OF CONTENTS.0 SCOPE... 3.0 PRODUCT DESCRIPTION... 3. PRODUCT NAME AND SERIES NUMBER(S)... 3. DIMENSION, MATERIALS,