IEC Connectors. Introduction
|
|
- Jody Watson
- 8 years ago
- Views:
Transcription
1 Introduction IEC Connectors A full range of quality mains rated inlets, outlets and connectors conforming to IEC and EN specifications carrying UL, CSA, VDE and other approvals. With electrical ratings up to 20A, 250V (UL) these connector ranges offer solutions to most mains powered equipment and cable applications. The combinations of mounting styles and terminations include: flange fixing, snap to panel and PCB mounting versions together with 2.8/ solder tabs, 4.8 and 6.3 fast on tabs, screw terminal and PC spill versions. Completing the range are insulating boots, retaining and safety covers In addition to the standard black moulding, most styles are also available in either white or grey and special colours to match OEM equipment can also be supplied. (Subject to product approval requirements) Inlets and Outlet Connectors Distribution Units Polysnap Connection Modules EMI Mains Filters IEC Connectors 128
2 IEC60320 Main Inlets and Outlets Panel Mounting IEC Sheet No: No Pins Current Rating Fixing Snap fit Fused Fused Snap fit Filtered Fuse Filtered C14 3 PX0579 PX0580 PX0580/PC PX0580/PC/12132 PX0580/PC/7 PX0580/PC/7LC PX0575 PX0575/PC PF0001 PF0001/PC PF0002 PF0030 PF0030/PC PF0011 PF0011/PC PS00 PS01 PS20 PS21 PS25 PS26 C16 3 PX0590 PX0595 C18 2 PX0690 PX0691 PX0691/PC PF0006 PF0007 PF0016 C A, 250V a.c. PX0596 PX0598 IEC Sheet No: No Pins Current Rating Fixing Snap fit Fused Fused Snap fit Filtered Fuse Filtered F 3 PX0675 PX0675/PC PX0675/PC/12599 PX0793 (Shuttered) PX0793/1(Shuttered) PX0695 PX0695/PC PX0783 (Shuttered) PX0716 PX0717 PX0718 H 2 PX0705 PX0725 J 3 16A, 250V a.c. PX0591 PX IEC Connectors
3 IEC60320 Mains Connectors and Plug Connectors Cable Mounting IEC Sheet No: No Pins Current Rating Rewirable Side Entry Rewirable C13 3 PX0587 PX0588 PX0587/SE C15 3 PX0597 C A, 250V a.c. PX0599 IEC Sheet No: No Pins Current Rating Rewirable Side Entry Rewirable E 3 PX0686 PX0685 PX0686/SE IEC Connectors 130
4 EN Standard Sheet C13 Class I Rewirable Cold Condition Straight Female Connector Cable Mounting Rewirable PX0587 Side Entry Female Connector Cable Mounting Rewirable PX0587/SE Angled Female Connector Cable Mounting Rewirable PX0588 PX0587/Col PX0587/SE/Col PX0588 Withdrawal Force: Contacts No suffix (Black), /WH (White), /GY (Grey Pole-Pole 4.5kV. (Poles-Accessible) Parts 4kV 10N (Min.) 50N (Max.) Brass, Clean Pole-Pole 4.5kV. (Poles-Accessible) Parts 4kV 10N (Min.) 50N (Max.) Brass, Clean - Pole-Pole 5kV. (Poles-Accessible) Parts 3.5kV 10N (Min.) 50N (Max.) Brass, Clean VDE and ENEC approval for black and white VDE and ENEC approval for black and white Mating Inlets: PX0575, PX0579, PX0580, PF0001, PF0011, PF0030, PF0033 PX0575, PX0579, PX0580, PF0001, PF0011, PF0030, PF0033 PX0575, PX0579, PX0580, PF0001,PF0011, PF0030, PF IEC Connectors
5 EN Standard Sheet C14 Class I Rewirable Cold Condition Snap Fit to Panel Inlet PX0575/10/28 Fits Panel Sizes 1, 1.5, 2.0 or 3.0mm 2.8, 4.8, 6.3mm Tabs or PC Snap Fit to Panel Inlet Fits Panel Sizes 1, 1.5, 2.0 or 3.0mm PC Spills PX0575/10/PC Fixing(Panel): Range: Max. Pin Temp.: Mating Connectors: PX0575/Panel/Term/Col Pole-Pole 5kV. Poles-Panel 5.4kV, Screw Terms, Nickel P.No (See Page 152) VDE and ENEC approval for black PX0575/Panel/PC/Col P.C. Spills Pole-Pole 5kV. Poles-Panel 5.4kV Brass: Pins, Nickel. Spills, Tin Standard without cover. With cover add /C to P.No. VDE and ENEC approval for black IEC Connectors 132
6 EN Standard Sheet C14 Class I Rewirable Cold Condition Mount Inlet 2.8, 4.8, 6.3mm Tabs or PX0580/28 Vertical Mount Inlet 2.8, 4.8, 6.3mm Tabs or PX0579/28 Fixing: Max. Pin Temp.: Mating Connectors: PX0580/Term/Col, /TERM (screw) Pole-Pole 5kV. Poles-Panel 10kV, Screw Terms, Nickel P.No , KT0006 (PX0587 only) (See Pages 150 and 152) VDE and ENEC approval for black PX0579/Term/Col Pole-Pole 5kV. Poles-Panel 10kV P.No (See Page 152) pending 133 IEC Connectors
7 EN Standard Sheet C14 Class I Cold Condition PC Rear Mount Inlet With or Without Rear Cover PC Spills PX0580/PC PC Rear Mount Inlet With or Without Cover PC Spills 4.8mm Top Tab (earth) PX0580/PC/7 Fixing: PX0580/PC/Col P.C.B./ P.C. Spills PX0580/PC/7/Col P.C.B./ P.C. Spills Range: Max. Pin Temp : Mating Connectors: Pole-Pole 5.4kV. Poles-Panel 10kV Brass: Pins, Nickel. Spills, Tin Standard without cover. With cover add /12132 to P.No VDE approvals for black version only Pole-Pole 5.4kV. Poles-Panel 10kV Brass: Pins, Nickel. Spills, Tin Standard without cover. With cover add /12132 to P.No. VDE approvals for black version only IEC Connectors 134
8 EN Standard Sheet C14 Class I Rewirable Cold Condition (Fused) d Mount Fused Inlet Single Fuse 5 x 20mm Spare Fuse Facility 2.8, 4.8 or 6.3mm Tabs Fuse Contacts Isolated (PF0002) PF0001/28 PF0002/28 PC d Mount Fused Inlet Single Fuse 5 x 20mm Spare Fuse Facility PC Spills - Horizontal PF0001/PC PF0001/Term/Col PF0001/PC/Col PF0002/Term/Col Fixing(Panel): P.C.B./ No suffix (Black), /WH (White), /GY (Grey) P.C. Spills No suffix (Black), /WH (White), /GY (Grey) No suffix (Black), /WH (White), /GY (Grey) Max. Fuse Rating: 2.5W/ 2.5W/10A, 250V a.c 2.5W/10A, 250V a.c Max. Pin Temp.: (<15mΩ including Fuseholder) Pole-Pole 5.5kV. Poles-Panel 4kV (<15mΩ including Fuseholder) Pole-Pole 5.5kV. Poles-Panel 4kV Pole-Pole 5.5kV. Poles-Panel 4kV P.No , KT0009 See Pages 150 & 152) VDE and ENEC approval for black versions only. KT0009 (front of panel mounting only) (See Page 150) VDE and ENEC approval for black versions only. P.No , KT0009 (See Pages 150 & 152) (Note: Fuse contact isolated) VDE and ENEC approval for black Mating Connectors: 135 IEC Connectors
9 EN Standard Sheet C14 Class I Rewirable Cold Condition (Fused) Snap Fit to Panel Fused Inlet PF0011/10/28 Single Fuse 5 x 20mm Spare Fuse Facility Panel Sizes 1, 1.5, 2.0 or 3.0mm 2.8, 4.8 or 6.3mm Tabs PC Snap Fit to Panel Fused Inlet PF0011/10/PC Single Fuse 5 x 20mm Spare Fuse Facility Panel Sizes 1, 1.5, 2.0 or 3.0mm PC Spills Fixing: Max. Fuse Rating PF0011/Panel/Term/Col 2.5W/10A, 250V a.c PF0011/Panel/PC/Col P.C. Spills 2.5W/10A, 250V a.c Max. Pin Temp.: Mating Connectors: (<15mΩ including Fuseholder) Pole-Pole 5.5kV. Poles-Panel 4kV P.No (See Page 152) VDE and ENEC approval for black (<15mΩ including Fuseholder) Pole-Pole 5.5kV. Poles-Panel 4kV Brass: Pins, Nickel. Spills, Tin VDE and ENEC approval for black IEC Connectors 136
10 EN Standard Sheet C14 Class I Rewirable Cold Condition (Fused Twin) d Mount Fused Inlet Twin Fused 5 x 20mm 2.8, 4.8 or 6.3mm Tabs PF0030/28 PC d Mount Fused Inlet Twin Fused 5 x 20mm PC Spills PF0030/PC Snap Fit to Panel Fused Inlet Twin Fused 5 x 20mm Fits Panel Sizes 1.0, 1.5, 2.0 or 3.0mm 2.8, 4.8 or 6.3mm Tabs PF0033/10/28 PF0030/Termination PF0030/PC PF0033/Panel/Termination Fixing(Panel): P.C.B/ P.C. Spills <15mΩ (per pole) <15mΩ (per pole) <15mΩ (per pole) Pole-Pole 6kV. Poles-Panel 5kV Pole-Pole 6kV. Poles-Panel 5kV Pole-Pole 6kV. Poles-Panel 5kV Max. Dissipation Per Fuse: 2.5W 2.5W 2.5W Max. Pin Temp.: 20 C to 20 C to 20 C to Mating Connectors: KT0009 (See Page 150) 137 IEC Connectors
11 EN Standard Sheet C15 & C16 Class I Class 1 Hot Condition Straight Female Connector PX0597 Cable Mounting Hot Condition Mates with PX0590 and PX0595 Mount Inlet Hot Condition 2.8 or 6.3mm Tabs PX0590/28 Snap Fit to Panel Inlet PX0595/10/28 Hot Condition Panel Sizes 1, 1.5, 2.0 or 3.0mm 2.8, 4.8, 6.3mm Tabs or PX0597/Col PX0590/Term/Col PX0595/Panel/Term/Col Fixing(Panel): /28 (2.8mm solder),, /TERM (screw) Pole-Pole 4.5kV. Poles-Accessible Parts 4kV Pole-Pole 5kV. Poles-Panel 10kV Pole-Pole 5kV. Poles-Panel 5.4kV Max. Pin Temp: Withdrawal Force: 10N (Min.) 50N (Max.) +120 C +120 C Brass, Clean Brass, Pins Nickel. Tabs, Tin Brass, Pins Nickel. Tabs, Tin VDE and ENEC approval for black and white P.No , KT0006 (See Pages 150 & 152) VDE and ENEC approval for black versions only. P.No (See Page 152) VDE and ENEC approval for black Mating Connectors: PX0590, PX0595 PX0597 PX0597 IEC Connectors 138
12 EN Standard Sheet C18 Class II Cold Condition d Mount Inlet Two Pin Class II (No Earth Pin) 2.8, 4.8, 6.3mm Tabs or PX0690/28 Snap Fit to Panel Inlet PX0691/10/28 Two Pin Class II (No Earth Pin) Panel Sizes 1, 1.5, 2.0 or 3.0mm 2.8, 4.8, 6.3mm Tabs or PC Snap Fit to Panel Inlet PX0691/10/PC Two Pin Class II (No Earth Pin) Panel Sizes 1, 1.5, 2.0 or 3.0mm PC Spills PX0690/Term/Col PX0691/Panel/Term/Col PX0691/Panel/PC/Col Fixing(Panel):, /TERM (screw), /TERM (screw) P.C. Spills Pole-Pole 5kV. Poles-Panel 10kV Pole-Pole 5kV. Poles-Panel 5.4kV Pole-Pole 5kV. Poles-Panel 5.4kV Max. Pin Temp.:, Screw Terms, Nickel, Screw Terms, Nickel Brass: Pins, Nickel. Spills, Tin P.No (See Page 152) VDE and ENEC approval for black versions only. P.No (See Page 152) VDE and ENEC approval for black versions only. Standard without cover. With cover add /C to P.No. VDE and ENEC approval for black Mating Connectors: 139 IEC Connectors
13 EN Standard Sheet C18 Class II Cold Condition (Fused) d Mount Fused Inlet Single Fuse 5 x 20mm Two Pin Class II (No Earth Pin) 2.8, 4.8 or 6.3mm Tabs PF0006/28 d Mount Fused Inlet Single Fuse 5 x 20mm (Fuse Contacts Isolated) Two Pin Class II (No Earth Pin) 2.8, 4.8 or 6.3mm Tabs PF0007/28 Snap Fit to Panel Fused Inlet PF0016/10/28 Single Fuse 5 x 20mm Two Pin Class II (No Earth Pin) Fits Panel Sizes 1.0, 1.5, 2.0 or 3.0mm 2.8, 4.8 or 6.3mm Tabs PF0006/Term/Col PF0007/Term/Col PF0016/Panel/Term/Col Fixing(Panel): (<15mΩ including Fuseholder) (<15mΩ includingfuseholder) Pole-Pole 5.5kV. Poles-Panel 4kV Pole-Pole 5.5kV. Poles-Panel 4kV Pole-Pole 5.5kV. Poles-Panel 4kV Max. Pin Temp.: P.No (See Page 152) VDE and ENEC approval for black versions only. P.No (See Page 152) (Note: Fuse contacts isolated) VDE and ENEC approval for black versions only. P.No (See Page 152) VDE and ENEC approval for black Mating Connectors: IEC Connectors 140
14 EN Standard Sheet E Class I Rewirable Angled Male Connector Cable Mounting Four Position Cable Entry Rewirable PX0685 Straight Male Connector Cable Mounting Rewirable PX0686 Side Entry Male Connector Cable Mounting Rewirable PX0686/SE PX0685/Col PX0686/Col PX0686/SE/Col Fixing(Panel): Pole-Pole 5.2kV. Poles-Accessible Parts 6kV Pole-Pole 5kV. Poles-Accessible Parts 5kV Pole-Pole 5kV. Poles-Accessible Parts 5kV Withdrawal Force: 10N (Min.) 50N (Max.) Brass, Nickel. 10N (Min.) 50N (Max.) Brass, Nickel. 10N (Min.) 50N (Max.) Brass, Nickel. Unique octagon module allows choice of 4 cable positions VDE and ENEC approval for black and white VDE and ENEC approval for black and white Mating Outlets: PX0675, PX0695, PX0578, PX0783, PX0793, PX0793/1 PX0675, PX0695, PX0578, PX0783, PX0793, PX0793/1, PX0716, PX0717 & PX0718 PX0675, PX0695, PX0578, PX0783, PX0793, PX0793/1, PX0716, PX0717 & PX IEC Connectors
15 EN Standard Sheet C14 Class I Cold Condition & EN Standard Sheet F Class I Cold Condition Snap Fit to Panel Inlet/ Outlet Inlet/Outlet combination Panel Size1.2mm 4.8mm tabs PX0716/48 Snap Fit to Fused Inlet/ Outlet Fused Inlet/Outlet combination 1-6 outlet versions Panel Size 1.5mm Terminals: inlet: 4.8mm tabs outlet: solder tags (15A, 250V a.c. UL) All outlet terminals linked, common earth throughout. PX0718/x/xx/ST Fixing: Dielectric Strength: Max. Pin Temp: PX0716/Termination Snap fit 1.2mm accommodation /48 (4.8mm tab) (UL 15A, 125V a.c.) >100MΩ (500V d.c., 1 min.) 2kV (50Hz, 1 min.) 20 C to +70ºC Nylon 66, Flammability Rating UL94V-0 PX0718/x/15/Termination Snap fit 1.5mm accommodation /ST (outlet solder tag, inlet 4.8mm tab) (UL 15A, 250V a.c.) >100MΩ (500V d.c., 1 min.) 2kV (50Hz, 1 min.) 20 C to +70ºC Glass filled Thermoplastic, UL94V-0 C US C US Mating With:, PX0686, PX0686/SE, PX0686, PX0686/SE IEC Connectors 142
16 EN Standard Sheet F Class I Snap Fit to Panel Outlet Snap Fit to Panel Panel Size 1.5mm Solder Tabs (15A, 250V a.c. UL) All Terminals Linked PX0717/x/xx/ST Mount Outlet Front of Panel Mount 6.3mm tabs (15A, 250V a.c. UL) PX0578/63 Fixing: Dielectric Strength: Max. Pin Temp: PX0717/x/15/Termination Snap fit 1.5mm accommodation /ST (solder (UL 15A, 250v a.c.) >100MΩ (500V d.c., 1 min.) 2kV (50Hz, 1 min.) 20 C to Glass filled Thermoplastic, UL94V-0 Brass, Tin plated PX0578/Termination (UL 15A, 250v a.c.) >100MΩ (500V d.c., 1 min.) 2kV (50Hz, 1 min.) 20 C to Glass filled Thermoplastic, UL94V-0 Brass, Tin plated C US C US Mating With: PX0686, PX0686/SE PX0686, PX0686/SE 143 IEC Connectors
17 EN Standard Sheet F Class I Mount Outllet 2.8mm or 6.3mm Tabs. PX0675/28 PC Rear Mount Outlet PC Spills PX0675/PC Fixing: PX0675/Term/Col, Pole-Pole 7kV. Poles-Panel 9kV PX0675/PC/Col P.C.B./ P.C. Spills Pole-Pole 4kV. Poles-Panel 9kV Mates with: P.No , KT0006, (See Pages ) VDE and ENEC approval for black PX0685, PX0686, PX0686/SE UR approvals does not cover 4.8mm tab option Standard without cover. With cover add /12599 to P.No., (see page 151) VDE and ENEC approval for black PX0685, PX0686, PX0686/SE IEC Connectors 144
18 EN Standard Sheet F Class I Snap Fit to Panel Outlet Panel Sizes 1, 1.5, 2.0 or 3.0mm 2.8 or 6.3mm Tabs PX0695/10/28 PC Snap Fit to Panel Outlet Panel Sizes 1, 1.5, 2.0 or 3.0mm PC Spills PX0695/10/PC Fixing: PX0695/Panel/Term/Col /28 (2.8mm solder), Pole-Pole 7kV. Poles-Panel 9kV P.No , (See Page ) VDE and ENEC approval for black PX0695/Panel/PC/Col P.C. Spills Pole-Pole 4kV. Poles-Panel 9kV P.No (see page 151) VDE and ENEC approval for black Mates with: PX0685, PX0686, PX0686/SE, PX0685, PX0686, PX0686/SE, 145 IEC Connectors
19 EN Standard Sheet F Class I Snap Fit to Panel Outlet PX0783/10/28 Shuttered Panel Sizes 1, 1.5, 2.0 or 3.0mm 2.8, 4.8 or 6.3mm Tabs Mount Outlet Shuttered 2.8, 4.8 or 6.3mm Tabs PX0793/28 PC Snap Fit to Panel Outlet PX0793/1/Termination Shuttered Rectangular Mount Outlet 2.8, 4.8 or 6.3mm Tabs PX0783/Panel/Term/Col PX0793/Panel/PC/Col PX0793/1/Term/Col Fixing:, /ST (solder) No suffix (Black), /WH (White), /GY (Grey), /ST (solder) No suffix (Black), /WH (White), /GY (Grey) Rectangular, /ST (solder) No suffix (Black), /WH (White), /GY (Grey) Pole-Pole 7kV. Poles-Panel 9kV Pole-Pole 7kV. Poles-Panel 9kV Pole-Pole 7kV. Poles-Panel 9kV Nylon, Flammability Rating UL 94V-0 Nylon, Flammability Rating UL 94V-0 Nylon, Flammability Rating UL 94V-0 UR approvals does not cover 4.8mm tab option UR approvals does not cover 4.8mm tab option US approvals only covers /ST versions P.No , (See Page ) VDE and ENEC approval for black P.No , KT0006, (See Pages ) VDE and ENEC approval for black P.No , KT0006, (See Pages ) VDE and ENEC approval for black Mates with: PX0685, PX0686, PX0686/SE PX0685, PX0686, PX0686/SE PX0685, PX0686, PX0686/SE IEC Connectors 146
20 EN Standard Sheet H Class II Mount Outlet Two Pin Class II (No Earth Pin) 2.8, 4.8 or 6.3mm Tabs PX0705/28 Snap Fit to Panel Outlet PX0725/10/28 Two Pin Class II (No Earth Pin) Panel Sizes 1, 1.5, 2.0 or 3.0mm 2.8, 4.8 or 6.3mm Tabs Fixing: PX0705/Term/Col Pole-Pole 4kV. Poles-Panel 9kV UR approvals does not cover 4.8mm tab option PX0725/Panel/Term/Col Pole-Pole 7kV. Poles-Panel 9kV UR approvals does not cover 4.8mm tab option P.No (See Page 152) VDE and ENEC approval for black P.No (See Page 152) VDE and ENEC approval for black 147 IEC Connectors
21 EN Standard Sheet C19 & C20 Class I Cold Conditions C19 Straight Female Cable Connector PX0599 Rewirable 16A, 250V a.c. (20A, 250V a.c. UL and CSA) Wire Sizes (max); 3 x 2.5mm2, 3 x 12AWG Overall cable diameter up to 12mm C20 Mount Inlet 6.3mm or 4.8mm Tabs 16A, 250V a.c. (20A, 250V a.c. UL and CSA) PX0596 C20 Snap Fit to Panel Inlet Fits panel sizes 1, 1.5, 2.0 or 3.0mm 6.3mm or 4.8mm Tabs 16A, 250V a.c. (20A, 250V a.c. UL and CSA) PX0598 PX0599 PX0596/Termination PX0598/Panel/Termination Fixing (Panel):, /48 (4.8mm tab) Snap Fit, /10 (1mm), /15 (1.5mm),, /48 (4.8mm tab) 16A, 250V ac 20A, 250V ac UL and CSA >5MΩ 16A, 250V ac 20A, 250V ac UL and CSA >10⁶ MΩ 16A, 250V ac 20A, 250V ac UL and CSA >10⁶ MΩ Dielectric Strength Between contacts: 1.5kV ac 1.5kV ac 1.5kV ac Between contacts & accessible surfaces: 3kV ac 3kV ac 3kV ac Range: 40ºC to +70ºC 40ºC to +70ºC 40ºC to +70ºC Max. Pin Temp.: 70ºC 70ºC Withdrawal Force: 15N Min, 60N Max. Nylon, Flammability Rating UL 94V-0 Brass, Clean Pins: Brass, Nickel Tabs: Brass, Tin Plate Pins: Brass, Nickel Tabs: Mating Connectors: Accessories: C20 Inlets; PX0596 and PX0598 Snapfit PX0599 Rewirable Connector KT0012, P.No (see Pages 150 & 152) PX0599 Rewirable Connector P.No (see Page 152) IEC Connectors 148
22 EN Standard Sheet J & I, Class I Cold Conditions Mount Outlet Mounting 6.3mm Tabs 16A, 250V a.c. (20A, 250V a.c., UL & CSA) PX0591/63 Snap Fit to Panel Outlet Snap Fit to Panel Panel Size 1.5mm 6.3mm Tabs 16A, 250V a.c. (20A, 250V a.c., UL & CSA) PX0592/15/63 Straight Cable Connector PX0594 Re-wireable, screw terminals 16A, 250V a.c. (20A, 250V a.c. UL & CSA) Wire size (max.): 3 x 2.5mm2, 3 x 12 AWG Overall cable diameter up to 12mm PX0591/Termination PX0592/15/Termination PX0594 Fixing (Panel): Snap fit, 1.5mm accommodation 16A, 250V a.c. (UL & CSA 20A, 250V a.c.) >100MΩ (250V, 1 min. 16A, 250V a.c. (UL & CSA 20A, 250V a.c.) >100MΩ (250V, 1 min.) Screw terminals 16A, 250V a.c. (UL & CSA 20A, 250V a.c.) >5MΩ (min) Dielectric Strength Between contacts: 1.5kV ac 1.5kV ac 1.5kV ac Between contacts & accessible surfaces: 3kV ac 3kV ac 3kV ac Range: Max. Pin Temp.: Withdrawal Force: 15N Min, 60N Max. P.B.T., Flammability Rating UL94V-0 Brass, Nickel C US C US all pending Accessories: Mates with: PX0594 PX0594 PX0591, PX IEC Connectors
23 Accessories Retaining Clip Prevents Accidental Removal Fits flanged inlets Retaining Clip KT0006 (Shown with PX0580 & PX0587) Prevents Accidental Removal Fits fused flanged inlets) KT0009 (Shown with PF0001 & PX0587) Retaining Clip Prevents Accidental Removal For use with PX0596 flanged inlet and PX0599 connector KT0012 (Shown with PX0596 & PX0599) KT0006 KT0009 KT0012 Retaining Clip to prevent accidental removal of connector. Retaining Clip to prevent accidental removal of connector. Retaining Clip to prevent accidental removal of connector. Fits: PX PX0587 PX PX0597 PX PX0587 PX PX0686 PX PX0686 PX0793/1 + PX0686 Fits: PF0001+ PX0587 PF0001/PC +PX0587 PF PX0587 PF PX0587 Fits: PX PX0599 Material: Clip: Stainless Steel, other parts Brass, Nickel Clip: Stainless Steel, other parts Brass, Nickel Clip: Stainless Steel, other parts Brass, Nickel IEC Connectors 150
24 Accessories Blanking Cover Insulation Boot PNo PNo Blanking Cover Insulation Boot PNo PNo Blanking covers Protects Front of Outlet Connector Protects Against Accidental Electric Shock PVC Insulation Boots Protects Rear of Connector Protects Against Accidental Electric Shock P.No P.No P.No P.No Blanking cover for PX0578, PX0675, PX0695, PX0783, PX0793, PX0716, PX0717, PX0718 Blanking cover for PX0591, PX0592, Insulation boot for PS20, PS21, PS25, PS25, Insulation boot for PF0030, PF0033 (except /PC versions) Operating Temp: 20 C to +60 C 20 C to +60 C Max. Working Voltage: 250V a.c. 250V a.c. 250V a.c. 250V a.c. Flash Tested: 2kV a.c. 2kV a.c. 2kV a.c. 2kV a.c. Material: Nylon Nylon P.V.C. P.V.C. Flammability Rating: UL94V-0 UL94V-0 UL94V-0 UL94V IEC Connectors
25 Accessories Insulation Boot Insulation Boot PNo PNo Insulation Boot Insulation Boot PNo PNo PVC Insulation Boots Protects Rear of Connector Protects Against Accidental Electric Shock P.No P.No P.No P.No Insulation boot for PX0575, PX0579, PX0580 PX0590, PX0595 Insulation boot for PF range PF0001, PF0002, PF0006, PF0007, PF0011, PF0016 (Except /PC versions) Insulation boot for PX0675, PX0695, PX0705, PX0725, PX0783, PX0793, PX0793/1 (Except /PC versions) Insulation boot for PX0596, PX0598 Operating Temp: 20 C to +60 C 20 C to +60 C 20 C to +60 C 20 C to +60 C Max. Working Voltage: 250V a.c. 250V a.c. 250V a.c. 250V a.c. Flash Tested: 2kV a.c. 2kV a.c. 2kV a.c. 2kV a.c. Material: P.V.C. P.V.C. P.V.C. P.V.C. Flammability Rating: UL94V-0 UL94V-0 UL94V-0 UL94V-0 IEC Connectors 152
400 Series Buccaneer BUCCANEER POWER. bulgin
bulgin BUCCANEER FOR POWER Contact Retainer Sealing Gasket O Ring Contacts Locking Ring Retaining Nut Panel Body Contacts Contact Carrier O Ring Main Body Cable Gland Collet Gland Nut Sealed to IP68 when
More information400 Series - Mini USB Buccaneer
IP68 Sealed IP68 rated USB V2.0 performance Plug and play capability Shielded system Overmoulded cables Screw coupling PCB versions Dust and waterproof to EN60529 Data rates up to 480Mbs Hot pluggable,
More informationPANEL CUT-OUT DIMENSIONS
POWER, Mains, IEC A comprehensive range of 3 pin IEC connectors with extensive international approval status designed for 'cold condition' applications (65 C). Rated 10A, 2Vac and to IEC320, EN60320 and
More informationStandard Buccaneer - USB
IP68 rated USB version 2.0 performance Plug and play capability Visual mating indication Shielded system Single and double ended cables Screw coupling PCB versions Dust and waterproof sealing when mated
More informationAmphenol C 091 A/B/D. Circular Connectors. Amphenol-Tuchel Electronics GmbH
Amphenol C 091 A/B/D Circular Connectors Amphenol-Tuchel Electronics GmbH C 091 A Main Features Metal threaded coupling acc. to IEC. Number of contacts are 2 to 8, 12 and 14. Internal metal strain relief
More informationStandard Buccaneer - Ethernet
IP6 rated compliant PUR jacket on cable Shielded system shielded coupler Shroud on RJ45 Screw coupling Rewireable flex connector PCB mounted panel connector IDC termination panel connector Earth lead version
More information6000 Series Buccaneer. 30 twist locking Tamperproof lock prevents accidental un-mating. Cat 5e shielded coupler Maintains shielding
circular connectors that combine the ease of use of a push/pull coupling mechanism with proven environmental sealing. Available with metal or plastic bodies, the range supports both data (USB and Ethernet),
More informationᔢ In-line Flex Cable Connector ᔢ ᔢ ᔢ. Push/pull coupling ᔢ ᔢ
BUCCANEER A full range of dust and waterproof circular s with ratings from IP66, IP68 to IP69K designed to provide safe and secure connections in harsh or hostile conditions. Including the EXPlora ATEX
More informationCONEC SnapLock. 1 Introduction
CONEC SnapLock E L E C T R O N I C C O N N E C T O R S 1 Introduction The new CONEC SnapLock locking system consists of D-SUB connectors and D-SUB hoods allowing quick and safe locking without any additional
More informationCIN::APSE MICROMINIATURE D-SUB
INTRODUCTION CINCH has been producing filter connectors for years and has acquired an in depth knowledge of EMC protection. CINCH offers fast delivery on a wide range of standard filtered connectors and
More informationDirectory chapter 04
M Directory chapter 04 D-Sub Mixed subminiature D connectors New Page D-Sub mixed connector system general information................... 04.02 Contact arrangements............................................
More informationUniversal MATE-N-LOK Connectors
Product Facts Pins and sockets can be intermixed in the same housing Positive polarization Rear cavity identification completely enclosed in housings Positive locking housings Insulation capability to.00
More informationProduct Catalogue. Issue No 83
Product Catalogue Issue No 83 CONTENTS BATTERY HOLDERS 5-12 IP67 Sealed 7 Panel Mounting 8-9 PCB/Base Mounting 10-11 BATTERY HOLDERS HAZARDOUS AREA CONNECTORS 13-18 EXPlora - Zone 2 and 22 13-18 IP68 SEALED
More information7000 Series Buccaneer
The all plastic and metal construction of the - circular that combine the ease of use of a quick coupling mechanism with proven environmental sealing for signal and mains power. Designed and independently
More informationpicomax The Pluggable Connection System
picomax The Pluggable Connection System TECHNOLOGY THIS SPECIALIZED CAN T MEET ALL REQUIREMENTS. YES IT CAN. CONTENTS picomax Pin spacing: 3. mm/0.138 in;.0 mm/0.197 in; 7. mm/0.29 in Versatile Pluggable
More informationPin/terminal: Wire protect: Screw/torque: Dubilier Connectors. Plan Pin Dia 1.0 Rec-hole Size 1.1. Pin/terminal: Wire protect: Screw/torque:
TERMINA BOCKS mm PITCH VERTICA MOUNT mm Pitch and 3 pole interlocking 4- pole solid, end stackable U94v-0 Flame retardant material.mm wire acceptance U/VDE approved Screw terminal 7.A/380V Dielectric Strength:
More informationTrapezoidal-Connectors Series TMC
Trapezoidal-Connectors Series TMC Subminiature-D Connectors to DIN 41 652/IEC 807-3 General Series TMC connectors are available in 5 different housing sizes with 9, 15, 25, 37 and 50 pins. In applications
More information08. SEK IDC CONNECTORS
. IDC CONNECTORS connectors for flat cables enable simple and, cost-optimized device configuration. connectors are preferably used for connection within the device. HARTING offers a broad range of these
More information1000 Series Miniature Slide Switches
Miniature Switches Features/Benefits Variety of actuators and terminations Panel mount tabs available Epoxy terminal seal compatible with bottom-wash cleaning RoHS compliant Typical Applications Test &
More informationUTS discrete wire sealing
Technical characteristics Mechanical Durability: 250 matings & unmatings Vibration resistance: Sinusoidal vibrations per CEI 605-4 - from 10 to 2000 Hz Thermal shock: 5 cycles 30 min. from -40 C to 105
More information6000 Series Buccaneer
Robust, instant connections for harsh environments 6000 Series Buccaneer - circular connectors that combine the ease of use of a push/pull coupling mechanism with proven environmental sealing. Available
More informationSwitches SWITCHES SWITCHES
Switches Manufactured from Stainless Steel, Bulgin s extensive range of vandal resistant security switches are designed with a high resistance to wear and tear, corrosion and harsh use in potentially hostile
More informationDirectory chapter 02 - DIN Power (to 6 A) Types D, E, F, FM, 2F, F9, interface connectors I/U 02. 01. Technical characteristics types D and E... 02.
Directory chapter 02 - () Types D, E, F, FM, 2F, F9, interface connectors I/U Page Technical characteristics types D and E.............................. 02.10 Type D connectors.................... 02.11
More informationSOURIAU s discrete wire sealing
SOURIAU s discrete wire sealing Description Using proven grommet technology from SOURIAU s extensive knowledge of harsh environments, the UTO & UTS connectors with grommet garantie a discrete wire sealing
More informationSTANDARD MICRO-D CONNECTORS
STANDARD MICRO-D CONNECTORS RECTANGULAR CONNECTORS Pigtail connector - Metal shell.............................. 56 Pigtail connector - Low profile - Metal shell.................... 58 Pigtail connector
More informationSMS - Qikmate. Performance characteristics
- Qikmate Qikmate panel and cable connectors Description The versatile Qikmate panel and cable connectors are a highly cost-effective system approach to solving the constant demand for more cost effective
More informationMagnetic and Hydraulic-Magnetic Circuit Breaker 8340-G2...
Magnetic and Hydraulic-Magnetic Circuit Breaker 840-G2... Description Single, two and three pole magnetic circuit breakers with trip-free mechanism and push/pull on/off manual actuation. A choice of fast
More informationNew Media Power Socket Outlets. New Media Power Socket Outlets
New Media Power Socket Outlets The New Media Modules offer a flexible build solution to a host of individual power socket outlet requirements. The clip fit grid modules are simple to install in their blank
More information2010-2011. Shortform Catalogue. Solutions for appliance & electronic applications. rocker switches. lever. switches. push. switches.
2010-2011 Solutions for appliance & electronic applications Shortform Catalogue rocker lever push vandal resistant slide door snap-action & safety rotary IEC sockets fuseholders indicators A trading name
More informationISO VIEW OF AX SERIES XLR CABLE CONNECTOR
ISO VIEW OF AX SERIES XLR CABLE CONNECTOR One piece ground / latch spring design incorporating twin wipe contacts for a direct connection path from mating shell to ground providing enhanced connection
More information01. HARTING RJ INDUSTRIAL RJ45 ETHERNET CONNECTORS
. HARTING RJ INDUSTRIAL ETHERNET CONNECTORS Ethernet is is coming up to standard industrial interface. Therefore, automation devices such as controllers, sensors and actuators feature possess on one or
More informationMini USB and USB 2.0-IP67 Connector System
Mini USB and USB 2.0-IP67 Connector System Section 12 Mini USB and USB 2.0-IP67 Connector System CONEC has added the Mini-USB connector. This Mini-USB IP67 receptacle and plug family, feature a bayonet
More informationAmphenolR. Now you're connected!
Table of Contents CoolPower Overview... Page 3 CoolPower Slim Drawer - DW Series... Page 4 CoolPower D-Sub - LCC17 Series... Page 7 Amphenol Power Solutions... Page 9 Other Amphenol Commercial Products...
More informationPowermate Range Pitch 7.62
owermate Range itch 7.62 in headers Socket connectors CB connection Solder connection SV 7.62/90 500 V / 43 A SV 7.62/180 500 V / 41 A.2.4 Cable connection Clamping yoke connection Tension clamp connection
More informationHARTING Ethernet Cabling 8-poles Overview
Ethernet Cabling 8-poles Overview RJ45 Connectors [on page 8] System cables [on page 12] Distribution modules and Outlets [on page 17] Connectors [on page 20] System cables [on page 26] Panel feed-throughs
More informationFASTON Terminals and Connectors
Introduction Product Facts Straight, right-angle and receptacle-tab combinations available Receptacles available for 6.3 mm, 4.8 mm and 2.8 mm tab size (.250,.187 and.110 Series) Receptacles mate with
More information0.8 U N /0.5 U N 0.8 U N /0.5 U N 0.8 U N /0.5 U N 0.2 U N /0.1 U N 0.2 U N /0.1 U N 0.2 U N /0.1 U N
55 Series - General purpose relays 7-10 A Features 55.12 55.13 55.14 Printed circuit mount, general purpose 2, 3 & 4 Pole relays 55.12-2 Pole 10 A 55.13-3 Pole 10 A 55.14-4 Pole 7 A AC coils & DC coils
More information3M Serial Attached SCSI (SAS) Connector Boardmount Compliant Pin and Surface Mount, Vertical Receptacle
M Serial Attached SCSI (SAS) Connector 6 Gbps input/output connector for backplane applications Two contact mating levels for early-mate and latebreak allows blind mating or hot swap applications Capable
More informationDisabled Toilet Alarm. Contractor Pack. Installation & Operating Instructions
Disabled Toilet Alarm Installation & Operating Contractor Pack Installation & Operating Instructions 1 Overview The Channel Safety Systems Disabled Toilet alarm contractor Packs are an efficient way of
More informationAC SERIES-C TYPE DUAL CONNECTORS JACK/XLR
AC SERIES-C TYPE DUAL CONNECTORS JACK/XLR The AC Series C type chassis receptacles feature two connectors in the one space saving housing. A combined XLR female receptacle together with a 6.35mm (1/4 )
More informationTerminal Block WR-TBL
Terminal Block WR-TBL 09/08-1 Terminal Block WR-TBL Würth Elektronik WR-TBL are available in many different connection types and offer large and modular terminal block possibilities in order to fulfill
More informationJack to Jack adapters Plug to Plug U-Link connectors PCB Right angle plastic PCB Right angle - metal. Ordering Codes
BNC 75Ω RF CONNECTORS BNC 75Ω RF CONNECTORS To meet the need for higher performance, impedance matched cable interconnections, Amphenol offers a full line of 75 ohm BNC connectors. These connectors can
More informationR&Mfreenet Advanced Cat 6 A Unshielded Connection Module
R&Mfreenet Advanced R&Mfreenet Advanced Cat 6 A Connection Module The R&Mfreenet Cat 6 A unshielded connection modules, part of the Advanced cabling system, are ideal for voice, fast data transmissions
More informationSMA Interface Mating Dimensions (Per MIL-STD-348)
SMA Series SMA 6 SMA Interface Mating Dimensions (Per MIL-STD-348) SMA Interface Dimensions MALE Inches/Millimeters 3 Minimum Nominal Maximum LTR in. mm in. mm in. mm A.250 6.35.263 6.68.. B.1790 4.55.1808
More informationSMZ type 43 INTRODUCTION. The Radiall Type 43 coaxial connector range. Type 43 series - Features and benefits
INTRODUCTION The Radiall Type 43 coaxial connector range The Radiall range of Type 43 series connectors is fully approved (where applicable) to BT (British Telecom) standards as well as to British Standard
More information14 PHOENIX CONTACT Courtesy of Power/mation. 1310 Energy Lane, Saint Paul, MN 55108. info@powermation.com - 800-843-9859 - www.powermation.
14 PHOENIX CONTACT PLUSCON circular is a circular connector for use in industrial automation. The range of design sizes available is varied, starting with the design sizes M5 to M8 and M1, for sensor/actuator
More informationSealed Industrial Ethernet Circular IP67 Cat. 5e RJ45 Connector System
Revised Sept--22-2009 Sealed Industrial Ethernet Circular IP67 Cat. 5e RJ45 Connector System Description The sealed circular RJ45 connector system is designed for use in harsh environments. The connector
More informationAC SERIES DUAL 1/4 (6.35mm) / XLR
AC SERIES DUAL 1/4 (6.35mm) / XLR The AC Series C type chassis receptacles feature two connectors in the one space saving housing. A combined XLR female receptacle together with a 6.35mm (1/4 ) phone jack
More informationTwo Position Cable-to-Board Power Connector System (Right Angle/Straight) with Coding Contacts
Product Specification 108-19346 17 APR 2013 Rev F Two Position Cable-to-Board Power Connector System (Right Angle/Straight) with Coding Contacts 1. SCOPE 1.1. Content NOTE The product may not perform according
More informationDCS Input/Output Relay Card Series
Input/Output Relay Card Series I/O RELAY CARD (with loopback test function) 8N The 8N series I/O Relay Cards easily and quickly standardize and facilitate installation of the relay board. Loopback test
More informationODU MEDI-SNAP. Miniature Circular Connectors with Push-Pull Locking Made of Plastic or Metal. www.odu.de
Miniature Circular Connectors with Push-Pull Locking Made of Plastic or Metal Miniature Circular Connectors with Push-Pull Locking for Medical Applications Applications Medical Test and measure equipment
More informationPC/104, PC/104 -Plus, VarPol connectors
164 PC/104, PC/104 -Plus, VarPol connectors Definitions 166 Technical specifications 168 Hole specifications 169 PC/104 170 PC/104-Plus 172 Accessories: PC/104 and PC/104-Plus 174 VarPol angled pin header
More informationINNOVATION SUPPORTED BY A TRULY SOLID INDUSTRIAL ORGANIZATION.
CONNECTORS 2014 INNOVATION SUPPORTED BY A TRULY SOLID INDUSTRIAL ORGANIZATION. Stelvio Kontek S.p.A. is one of the leading groups in the connectors market. With a solid background in the sector and having
More informationHARTING Ethernet Cabling 4-poles Overview
Overview RJ45 Connectors [on page 8] System cables [on page 10] Distribution modules and Outlets [on page 20] HARTING PushPull Connectors [on page 22] System cables [on page 24] Panel feed-throughs [on
More informationSeries Connectors for PCB
HE 8 / 127 Series Connectors for PCB MAIN CHARACTERISTICS Main features The 127 series circuit board connectors are available in 3 different versions: HE 801 / 127: E 301/B From 17 to 144 signal contacts,
More informationUniversal MATE-N-LOK Connector System
Universal MATE-N-LOK Connector System 2011 Tyco Electronics Corporation. All Rights Reserved. MATE-N-LOK, TE Connectivity, TE Connectivity (logo) and TE (logo) are trademarks. Other logos, products and/or
More informationTechnical data. General specifications. Indicators/operating means. 30 Hz Multiplex operation 30 Hz / n, n = number of sensors, n 5
Model Number Single head system Features Parameterization interface for the application-specific adjustment of the sensor setting via the service program ULTRA 000 programmable switch outputs Hysteresis
More information06 / 2003. Optional components. MAXDATA PLATINUM Server-Rack PLATINUM. [Product Guide] www.maxdata.de
D Positioning Key-Features Specifications Optional components MAXDATA PLATINUM Server-Rack PLATINUM [Product Guide] www.maxdata.de Positioning Description Server-Racks with 41U, 37U and 23U Highlights
More informationPowerLine. Single Pole Connectors
PowerLine Single Pole Connectors Ten 47 Limited Unit 2B Frances Industrial Park Kirkcaldy, Scotland, UK KY1 2XZ Tel: +44 (0)1592 655725 Fax: +44 (0)1592 651049 Email: sales@ten47.com INTRODUCTION BACKGROUND
More informationCMD Series. 4 Contact Row High Density Signal Connectors. Technical Characteristics
MD Series 4 ontact Row High Density Signal onnectors Offset-grid layout, four rows within dielectric connector body, mm center-to-center spacing in each row and row-to-row spacing. 0.6 mm nominal pin DI
More informationContents. Safety Warnings... 1
Contents Safety Warnings... 1 Unpacking the GQ600... 1 Introduction... 2 GQ600 Filter Characteristics... 2 1/3 Octave Centre Frequencies... 4 Front Panel Functions... 5 Rear Panel Functions... 6 Specifications...
More informationVario-Series Accessories
Accessories and spare parts for GMW analogue panel meters and controllers Current Transformers pages 2-9 Shunt Resistors 10-11 Voltage Dividers 12 Power supply for indicator/controllers 13 Blanking Plates
More informationDecorative Metal Wiring Accessories in Assorted Plate Finishes
Decorative Metal Wiring Accessories in Assorted Plate Finishes Switches Power Socket Outlets 13A Fused Connection Units Control Switches TV Telephone Data Sockets Deco unique product codes Decorative Metal
More informationHow to Order : Power Connector
How to Order : Power Connector Power Connector 89 90 XXX - XX X X X X - X X X XXX SPECIFICATIONS No. Specifications Standard Value Style A For Cable with S/R B For Cable without S/R P For Panel Front Mounting
More informationDeviceNet, Gender Changers and Elbow Connectors
DeviceNet, Gender Changers and Elbow Connectors Allows Quick and Easy Changes from to Connectors Available in Straight and Right Angle Styles with minifast Connectors Housing Part Number Specs Application
More information33.6W Power over Ethernet Waterproof Adapter PoE Plus Single Port Injector for Outdoor Application
33.6W Power over Ethernet Waterproof Adapter PoE Plus Single Port Injector for Outdoor Application Features Compliant with the IEEE802.3at Standard -40 to +60 C Temperature Range Diagnostic LEDs Full Protection
More informationPD30ETB20xxIS. Photoelectrics, Background Suppression reflective with IR light. Main features. Description
Photoelectrics, Background Suppression reflective with IR light Main features Description The PD30ET... stainless steel sensors are built with high-quality materials and designed for harsh environments.
More information.093 [2.36] Commercial Pin and Socket Connectors
Product Facts Polarized Cavity identification Low contact-mating force Dual locking lances Detent and positive locking Contacts available in brass and phosphor bronze with tin and gold plating Panel mounting
More informationRedundancy Module QUINT-DIODE/40
Redundancy Module QUT DIODE provides: 00% decoupling of power supplies connected in parallel Can be installed in potentially explosive areas Load currents up to 60 A supported Easy assembly by snapping
More informationCannon, VEAM, BIW. A Historical Achievement of Technology Leadership. Defining and Championing Innovation
Cannon, VEAM, BIW A Historical Achievement of Technology Leadership Defining and Championing Innovation Showcasing a portfolio of creativity, ITT s Engineered For Life execution embraces products which
More informationMTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors
MP Economy Power (EP) Connectors Table of Contents 2 Introduction This catalog has been designed to assist you, our customer, identify products to satisfy your connector needs for printed circuit board
More informationPOWER ROCKER SWITCH UL, CSA, VDE, TÜV, ÖVE, KEMA, SEMKO, NEMKO, DEMKO, FIMKO, SEV UL, CSA, VDE, TÜV, SEMKO, NEMKO, DEMKO, FIMKO, SEV, KEMA, ÖVE
POWER ROCKER SWITCH SWITCHES AJ8 switch standard actuator AJ8 switch Wide actuator RoHS Directive compatibility information http://www.nais-e.com/ FEATURES 1. Power rocker switches for safety requirements.
More informationTrident Connector Family Offers the Versatility and Reliability Required in Industrial & Transportation Applications
Trident Connector Family Offers the Versatility and Reliability Required in Industrial & Transportation Applications Industrial and transportation applications require robust connections with superior
More informationPhysical. Electrical. Environmental. Insulation: Contact: Plating: Temperature Rating: -55 C to +85 C
M I/O Interconnect System 2.0 mm for IEEE 194 Wiremount Receptacle (Female) E206 Series Designed to mate to all M I/O Interconnect System 2.0 mm for IEEE 194 Boardmount Plugs Polarized to provide proper
More informationHARTING Ethernet Cabling 4-poles Overview
Ethernet Cabling 4-poles Overview RJ45 Connectors [on page 8] System cables [on page 10] Distribution modules and Outlets [on page 20] Connectors [on page 22] System cables [on page 24] Panel feed-throughs
More informationPressure transmitter For general industrial applications Model A-10
Electronic pressure measurement Pressure transmitter For general industrial applications Model A-10 WIKA data sheet PE 81.60 for further approvals see page 9 Applications Machine building Shipbuilding
More informationAnderson Power Products
Anderson Power Products Anderson Power Products APP s philosophy is to provide products and services within the trading markets of our customers. We currently serve our world-wide customer base from customer
More informationFuses for Semiconductor Protection - Cylindrical Fuses. Class: Voltage ratings: Current ratings: Standards: Approvals: Features and Benefits
Fuses for Semiconductor Protection - Cylindrical Fuses SIBA cylindrical Ultra-Rapid fuses are available in six different sizes They can be ordered with an integral striker for blown fuse indication or
More informationGivare NC-SRS 280 och 880
Givare NC-SRS 280 och 880 Aratron AB/Nordic Control, 02 03 SRS280SEALED ROTARY SENSOR PERFORMANCE ±2 Resistance ±20% Hysteresis (repeatability) Accuracy Applied voltage maximum Resolution Output smoothness
More informationSD Memory Card Connectors
SD Memory Card Connectors DM Series Withstands higher force of card insertion. Card Standard type Metal cover extends over the back of the connector. Features. Withstands higher force of card insertion
More informationPressure monitoring equipment for oil-sf 6. bushings, type GOEK
Pressure monitoring equipment for oil-sf 6 bushings, type GOEK Installation and maintenance guide 5693 827-6 en, Rev. 3, 2002-01-30 This document must not be copied without our written permission, and
More information48.12. 2 pole, 8 A Safety relay. Screw terminal. 35 mm rail (EN 60715) mounting. 2 CO (DPDT) 8/15 250/400 2,000 500 0.37 8/0.65/0.
48 Series - Relay interface modules 8 A Features 48.12 2 Pole Safety relay interface modules, 15.8 mm wide 48.12-2 Pole 8 A (screw terminal) DC sensitive coils Relay with forcibly guided contacts according
More information3/2-way Solenoid Valve, direct-acting, NC or NO
3/2-way Solenoid Valve, direct-acting, NC or NO Electrical connection cable plug, Form A With or without manual override as standard Threaded port and sub-base s Impulse optional Type 6014 can be combined
More information3.1.1 Full Type Tests & Routine Tests according to Clause 8 2 & 8 3. 4.0 Instructions For Installation, Operation & Maintenance
SPECIFICATION FOR LOW VOLTAGE SWITCHBOARD SEN I N D E X Description 10 STANDARD TECHNICAL REQUIREMENTS 11 Standards 12 General Operating Conditions 13 General Description Of Switchboard 131 Structure 132
More informationTelephone- and leased line modem for industrial applications TD-36
Telephone- and leased line modem for industrial applications TD-36 Modem for industrial PSTN- and leased line applications The TD-36 is an analogue V.34 PSTN modem as well as an industrial 2-wire leased
More informationWaterproof Connectors for Outdoor Use
Waterproof Connectors for Outdoor Use HR41A Series Mated condition diagram Nut-tightening rear mount type (panel thickness=mm) 70.5 Features 1. Waterproof connector designed for outdoor use Light-weight
More informationZMR 80 STEREO MODULAR ZONER USERS MANUAL
ZMR 80 STEREO MODULAR ZONER USERS MANUAL Lime Technologies http://limetechnologies.co.uk Tel: 08712 233127 ZMR80 Stereo Modular Zoner Mixer Introduction The modular construction of the ZMR80 allows it
More informationAMPSEAL* Automotive Plug Connector and Header Assembly
AMPSEAL* Automotive Plug Connector and Header Assembly Application Specification 24 SEP 97 Rev E All dimensions are given in millimeters unless otherwise specified. All dimensional tolerances are +0.2
More informationAMP. 5.0 mm Power Key Connectors (5.0 PKC) (Wire-to-Board) Soft Shell Pin and Socket Connectors. Product Facts. Standard Density
5.0 mm Power Key Connectors (5.0 PKC) (Wire-to-Board) Product Facts Compact design with 19.4 mm mated height Power circuit connector with 5.0 mm contact centerline Wire-to-board connectors consisting of
More informationFLUORESCENT UV- RING LIGHT OPERATING INSTRUCTION
FLUORESCENT UV- RING LIGHT OPERATING INSTRUCTION Caution! UV-radiation of this device is in the range of UV-A (320-400 nm). Direct exposure to eyes shall therefore be avoided. UV protection glasses shall
More informationNEW! Typical Applications. Motor controls Thermostatics Portable tools Air Conditioner. Materials
TF2 Series Miniature Snapacting Switches NEW! Features/Benefits Broad range of operating forces Ratings up to 10 AMPS Wide variety of actuator styles Quick connect terminations Typical Applications Motor
More informationProgrammable set for Ethernet Modbus/TCP in IP67 TI-BL67-PG-EN-2
Type code Ident no. 1545065 Number of channels 2 Dimensions (W x L x H) 108 x 145 x 77.5 mm CoDeSys-programmable acc. to IEC 61131-3 Cable max. 50 m between interface and read/write head 10/100 Mbps Male
More informationSeries 8146/5-V37 and Series 8150/5-V37
www.stahl.de > Clear assignment safe technology easy installation > Intelligent structure only one rotary actuator for frequency-controlled drives ) 20 ms leading auxiliary contact for safe motor disconnection
More information1000 Series Miniature Slide Switches
Miniature Switches Features/Benefits Variety of actuators and terminations Panel mount tabs available Epoxy terminal seal compatible with bottom-wash cleaning RoHS compliant Typical Applications Test &
More informationM23 Connectors and cables
Contents M23 Connectors and cables M23 Connectors and cables Product Description: SAI M23 Connectors.2 Contact assignment.7 Technical data.8 Overview.10 M23 connector for signal transmission.12 M23 connector
More informationPAM Connectors. PAM Bayonet Connectors
PAM Bayonet Tel : 33 (0)1 60 84 21 40 Fax : 33 (0)1 60 84 43 81 info@bernier.tm.fr www.bernier.tm.fr Overview Miniature audio connectors with bayonet locking system, equipped with 07 or 10 contacts, and
More informationSERIES 1800 - SINGLE POLE AND DOUBLE POLE ROCKER SWITCHES UP TO 12 (4) A 250 V~ AND 8 (8) A 250 V~
SERIES 1800 - SINGLE POLE AND DOUBLE POLE ROCKER SWITCHES UP TO 12 (4) A 250 V~ AND 8 (8) A 250 V~ PRODUCT ADVANTAGES Switching principle with long life endurance due to a low friction contact system (ball),
More informationQM (1.78mm-.070") CONNECTORS-"MICRO 70"
QM (1.78mm-.070") CONNECTORS-"MICRO 70" General Designed to fill the needs of high density and miniature interconnection, the QM series are Super-Small IDC Connection. This IDC plug uses I/O Cable
More informationGlenair Military and Industrial Power and Signal Connectors
Glenair Military and Industrial Power and Signal Connectors Series ITS (And FRITS) 5015 Type Reverse Bayonet Connectors Derived from MIL-DTL-5015 and VG95234 Mating mechanism (3 reverse bayonets at 120
More informationTECHNICAL DATASHEET Incremental Encoder RI 58-D / RI 58TD
Direct mounting without coupling Flexible hollow shaft design up to diameter 4 mm Through hollow shaft or as end shaft (blind shaft) Easy installation by means of clamping shaft or blind shaft Short overall
More information