FOR BOARD-TO-CABLE CONNECTION

Transcription

1 FOR OARD-TO-ALE ONNETION 230 SERIES (FOR FLAT ALE ONNETION) FEATURES Two 1.27 mm (0.050 in.) pitch flat cables can be used mm (0.05 in.) pitch contact arrangement in two rows and terminal arrangement in a four-row staggered array (2.54 mm mm) ( in.) enable high-density mounting. The socket kit is comprised of two ID sockets (body 1, body 2). After ID termination, the bodies are "snapped" together to form one complete socket assembly. onnectors with 20 to 100 contacts are available. Latch mechanism provides easy disconnection. A clip-on key prevents incorrect insertion of a connector when two or more connectors with the same number of contacts are mounted on a P board. SPEIFIATIONS MATERIALS Item Operating temperature range urrent rating Voltage rating ontact resistance 55 to +105 D 0.5 A A 240 V 30 mω max. (D 6 V, 0.1A) Item Insulator onductor Plating Polyester opper alloy ontact Terminal Materials Gold plating Palladium plating Insulation resistance 1000 MΩ min. (D 500 V) Dielectric withstand voltage A 750 V for 1 minute Insertion force 3 kg max. (20 contacts) Withdrawal force 0.4 kg min. (20 contacts) Applicable wire 1.27 mm (0.050 in.) flat cable AWG #28 (stranded wire) 1

2 ORDERING ODE FN-23 4 P 040-G /M A Others M: With a latch W: Insulation displacement connection Plating G: Gold plating Number of contacts: 20, 26, 34, 40, 50, 52, 60, 68, 80, and 100 ody P: Plug : Socket Tail type 4: Straight 5: Right-angle 7: Insulation displacement connection 230 series connector Fujitsu connector APPLIATIONS FN-237 -G/W FN-234P -G/MA FN-237 -G/0W FN-670 -G/0 FN-235P -G/MA 2

3 STRAIGHT PLUG DIMENSIONS 1.27 (0.50) 2.54 (0.100) 14.2 (0.559) 3.4 (0.133) 22.7 (0.893) 5.6 (0.220) 7.2 (0.106) (0.075) MOUNTING HOLE LAYOUT (omponent side) Number of contacts : 20, 40, 52, 60, 68, 80 and 100 contacts Number of contacts : 26, 34 and 50 contacts ±0.1 (±0.004) ±0.1 (0.075 ±0.004 ) ±0.1 (±0.004) ±0.1 (0.075 ±0.004 ) φ0.8 ±0.02 (φ0.031 ±0.001 ) φ0.8 ±0.02 (φ0.031 ±0.001 ) ump side ump side PART NUMERS AND DIMENSIONS Number of contacts Part number FN-234P020-G/MA FN-234P026-G/MA FN-234P034-G/MA FN-234P040-G/MA FN-234P050-G/MA FN-234P052-G/MA FN-234P060-G/MA FN-234P068-G/MA FN-234P080-G/MA FN-234P100-G/MA A (0.035) (1.346) (1.546) (1.656) (1.946) (1.996) (2.196) (2.396) (2.696) (3.196) Dimensions: mm (in.) (0.738) (0.888) (1.088) (1.238) (1.488) (1.538) (1.738) (1.938) (2.238) (2.738) (0.450) (0.600) (0.800) (0.950) (1.200) (1.250) (1.450) (1.650) (1.950) (2.450) The connectors listed above have clinched retention tails. This series also includes connectors with tails which are not clinched for retention. Specify a part number by replacing -G/MA at the end with -G/M. 3

4 RIGHT-ANGLE PLUG DIMENSIONS 0.3 (0.011) 5.6 (0.220) 2.54 (0.100) 7.2 (0.106) F 15.4 (0.606) 20 (0.787) 28.5 (1.122) 13.5 (0.531) (0.075) D 3.4 (0.133) MOUNTING HOLE LAYOUT (omponent side) φ2.7 (φ0.106) Number of contacts : 20, 40, 52, 60, 68, 80 and 100 contacts D ±0.1 (±0.004) End ±0.1 (±0.004) Mating side terminal ±0.1 (0.075 ±0.004 ) φ2.7 (φ0.106) Number of contacts : 26, 34 and 50 contacts D ±0.1 (±0.004) ±0.1 (±0.004) Mating side End terminal ±0.1 (0.075 ±0.004 ) φ0.8 ±0.02 (φ0.031 ±0.001 ) φ0.8 ±0.02 (φ0.031 ±0.001 ) PART NUMERS AND DIMENSIONS Number of contacts Part number FN-235P020-G/MA FN-235P026-G/MA FN-235P034-G/MA FN-235P040-G/MA FN-235P050-G/MA FN-235P052-G/MA FN-235P060-G/MA FN-235P068-G/MA FN-235P080-G/MA FN-235P100-G/MA A (0.035) (1.346) (1.546) (1.656) (1.946) (1.996) (2.196) (2.396) (2.696) (3.196) (0.738) (0.888) (1.088) (1.238) (1.488) (1.538) (1.738) (1.938) (2.238) (2.738) Dimensions: mm (in.) (0.450) (0.600) (0.800) (0.950) (1.200) (1.250) (1.450) (1.650) (1.950) (2.450) D (0.850) (1.000) (1.200) (1.350) (1.600) (1.650) (1.850) (2.050) (2.350) (2.850) The connectors listed above have clinched retention tails. This series also includes connectors with tails which are not clinched for retention. Specify a part number by replacing -G/MA at the end with -G/M. 4

5 SOKET DIMENSIONS [ody 1] [ody 2] [onnection diagram] A 1.27 (0.050) 5.5 (0.216) 7.2 (0.106) [onnector cover with ID holders (for main bodies 1 and 2)] 16.5 (0.649) 4.5 (0.177) PART NUMERS AND DIMENSIONS Number of contacts Part number FN G/W FN G/W FN G/W FN G/W FN G/W FN G/W FN G/W FN G/W FN G/W FN G/W A (0.731) (0.881) (1.081) (1.231) (1.481) (1.531) (1.731) (1.931) (2.231) (2.731) Dimensions: mm (in.) (0.450) (0.600) (0.800) (0.950) (1.200) (1.250) (1.450) (1.650) (1.950) (2.450) (0.500) (0.650) (0.850) (1.000) (1.250) (1.300) (1.500) (1.700) (2.000) (2.500) See page 2-39 for ID tools. 5

6 HARNESS SHAPE 1.27 mm (0.050 in.) pitch [ody 1] lip-on key Assemble 1.27 mm (0.050 in.) pitch [ody 2] onnect a flat cable to each D connector main body then assemble the main hodise. AESSORY lip-on keys Part number: FN-230A1 Snap off here. 1.2 (0.047) 4.3 (0.169) 2.5 (0.098) 3.55 (0.139) 6

7 ID TOOLS Hand press able cutter Locator plate FN-707T-T001/H FN-707T-T101/H FN-237T-T058/H ONNETION PROEDURE (OUTLINE) 1. ut the flat cable with the cable cutter (cut perpendicular to the cable in the same way as for conventional MIL types). 2. Position the cover, flat cable, and connector body on the locator plate, then make connection using the hand press. 3. onnect the other connector body in the same way. onnector body Flat cable over Locator plate 4. Assemble the connector bodies. Finished 7

8 Fujitsu omponents International Headquarter Offices Japan Fujitsu omponent Limited Gotanda-huo uilding 3-5, Higashigotanda 2-chome, Shinagawa-ku Tokyo , Japan Tel: (81-3) Fax: (81-3) Web: North and South America Fujitsu omponents America, Inc. 250 E. aribbean Drive Sunnyvale, A U.S.A. Tel: (1-408) Fax: (1-408) components@us.fujitsu.com Web: Europe Fujitsu omponents Europe.V. Diamantlaan WV Hoofddorp Netherlands Tel: (31-23) Fax: (31-23) info@fceu.fujitsu.com Web: emea.fujitsu.com/components Asia Pacific Fujitsu omponents Asia Ltd. 102E Pasir Panjang Road #01-01 itilink Warehouse omplex Singapore Tel: (65) Fax: (65) fcal@fcal.fujitsu.com Fujitsu omponents America, Inc. All rights reserved. All trademarks or registered trademarks are the property of their respective owners. Fujitsu omponents America, Inc. or its affiliates do not warrant that the content of the datatasheet is error free. In a continuing effort to improve our products, Fujitsu omponents America, Inc. or its affiliates reserve the right to change specifications/datasheets witout prior notice. Rev. November 2,