8525 Series EN3646 EN3646 Qualified Connectors SOURIAU is now the first manufacturer to offer all EN3646 qualified connectors. A wide range Shell sizes 8 to 24. 3 platings available for aluminum connector. Hermetic stainless steel version. Time saving Bayonet locking system: one of the quickest in the aerospace connectors market. Proven technology Used on many applications: aerospace, railway, nuclear, telecom/datacom infrastructures. Customizable Fuel tank version. Various PC tail lengths. Can be delivered with backshells.
Description Bayonnet coupling Intermateable with MILC 26482 Series I and II RFI shielding plug Gold plated crimp #2, #, # Minicoax # Hermetic version available Technical features Mechanical Shell & plating:. Aluminum: Black anodized Nickel Olive green cadmium. Passivated stainless steel (hermetic) Insulator:. Thermoplastic. Glass sealed (hermetic) Seal: Silicone elastomer Contact:. Copper alloy. Gold plated ferrous alloy (hermetic) Contact plating: Gold Endurance:. 5 mating cycles for models A and Y. 25 mating cycles for models RS and WS Shock: Model Y, as per EN3646, 1 m/s² (1g) during 6 ms in the X, Y and Z axis Vibration: From 1 to 2 Hz acceleration: 2G Contact retention in insert:. size 2: 9 N. size : 115 N. size : 136 N Electrical Contact resistance:. size 2: 1 mω. size :.55 mω. size :.35 mω Insultation resitance: 5 MΩ at 5 Vdc Max current rating per contact: Size 2 Size Size Standard 7.5 A 13 A 23 A Hermetic 5 A 1 A 17 A Shell continuity: 5 mω, plug with grounding ring and receptacle 5 mω, plug with grounding ring and hermetic receptacle Dielectric withstanding voltage: Service sea level at 21 m I 15 Vrms 375 Vrms II 23 Vrms 55 Vrms Environmental Temperature range: 65 C to +175 C class WS 65 C to +2 C class A, RS and Y Damp heat: 56 days Salt spray:. 5 hours, class A, WS, Y. 48 hours, class RS Leakage: Low pressure immersion 33mbar Corrosion resistance: as per EN36461 Fluid resistance: as per EN36461 2
Contact layouts 8 1 3A/98 33 6 3 8 1 Contact #2 Contact # Contact # 3#2 3#2 6#2 3# I 8#2 1#2 Hermetic version available 14 4 5 15 19 8 21 23 26 4# 5# I 8#2 4# 14#2 1# 19#2 8# I #2 5# 22#2 1# 26#2 18 2 8 11 32 34 39 41 8# 11# 32#2 # I 26#2 8# 37#2 2# 41#2 22 21 24 41 55 19 31 61 # Service? 21# I 27#2 14# 55#2 19# I 31# 61#2 3
Ordering information Basic series EN3646 RS 1 6 M N Shell type, temperature, plating and rear teeth A6: Aluminum plug without grounding spring, 2 C, black anodized plated, 3 rear teeth at RS6: Aluminum plug with grounding spring, 2 C, nickel plated, 3 rear teeth at WS6: Aluminum plug with grounding spring, 175 C, olive green cadmium plated, rear teeth over 36 A: Aluminum square flange receptacle, 2 C, black anodized plated, 3 rear teeth at RS: Aluminum square flange receptacle, 2 C, nickel plated, 3 rear teeth at WS: Aluminum square flange receptacle, 175 C, olive green cadmium plated, rear teeth over 36 A7: Aluminum jam nut receptacle, 2 C, black anodized plated, 3 rear teeth at RS7: Aluminum jam nut receptacle, 2 C, nickel plated, 3 rear teeth at WS7: Aluminum jam nut receptacle, 175 C, olive green cadmium plated, rear teeth over 36 Shell size: 8, 1,, 14,, 18, 2, 22, 24 Contact layout: See previous page Contact type M: Male F: Female A: Connector delivered without male contact B: Connector delivered without female contact C: Connector delivered with male contact #2 D: Connector delivered with female contact #2 Orientation: N, W, X, Y, Z Hermetic connectors Basic series EN3646 Y 8 3 M N Y: Hermetic, mandatory suffix Shell type: : Square flange receptacle, 2 C, passivated stainless steel 1: Solder mount receptacle, 2 C, passivated stainless steel 7: Jam nut receptacle, 2 C, passivated stainless steel Shell size: 8, 1,, 14,, 18, 2, 22, 24 Contact layout: See previous page M: Pin solder Orientation: N, W, X, Y, Z Aluminum protective covers Basic series EN3646 RS3 C 1 Cover style, temperature and plating A3: Cover for receptacle, 2 C, black anodized plated RS3: Cover for receptacle, 2 C, nickel plated WS3: Cover for receptacle, 175 C, olive green cadmium plated A4: Cover for plug, 2 C, black anodized plated RS4: Cover for plug, 2 C, nickel plated WS4: Cover for plug, 175 C, olive green cadmium plated Fixing type C: Small fixing attachement, 4.2 mm hole diameter D: Large fixing attachement Size: 8, 1,, 14,, 18, 2, 22, 24 Dummy receptacles Basic series EN3646 WS5 1 Temperature and plating A5: 2 C, black anodized plated RS5: 2 C, nickel plated WS5: 175 C, olive green cadmium plated Size: 8, 1,, 14,, 18, 2, 22, 24 Please consult us. Please consult us. 4
Contacts Technical characteristics Contact type Male contact Ø Retention force Current rating Contact resistance External Ø over insulator Admissible wires Admissible section Wire gauge #2 #2 # # # # small barrel.25 to.6 mm 2 24 to 2 1 mm 9 N 7.5 A 1 mω.98 to 2.11 mm.25 to 1 mm 2 24 to 18.6 to 1.2 mm 2 2 to 1.6 mm 115 N 13 A.55 mω 1.34 to 2.62 mm 1 to 2 mm 2 18 to 14 23 A 2.45 to 4.1 mm 1.2 to 3 mm 2 to 2.4 mm 136 N.35 mω 1 A.98 to 2.11 mm.25 to 1 mm 2 24 to 18 Note: Reducing sleeve for #2 standard contact available. For wire.9 to.21 mm 2. PN 85222142PZ. Part numbers EN3155 Contact type Male contact Part number Female contact Color band Dot #2 18M22 19F22 Red/Red #2 18M218 19F218 Red/Violet Standard Thermocouple # 18M 19F Blue/Blue # 18M14 19F14 Blue/Orange # 18M 19F Yellow/Yellow # small barrel #2 chromel #2 alumel 18M18 19F18 Violet/Yellow 56M22 57F22 Red/Red Yellow/White 54M22 55F22 Red/Red Black/White Minicoax Installed instead of size. Part numbers Male 852221 852222 Female 852211 8522 Admissible cables RG 3 U KX 22 A RG 174 U KX 3 A RG 188 A/U RG 179 B/U RG 178 B/U KX 21 A RG 196 A/U 5
Orientation Polarization code Shell size Layout N W X Y Z 8 3A 33 6 9 For further information contact us at contactmilaero@souriau.com or visit our web site www.souriau.com 21 1 6 9 14 3 8 1 4 5 15 19 8 21 23 26 9 6 45 4 43 17 3 54 158 6 Maximum connector weights (in grams) Shell type Sealed without Hermetic with Angle Viewed from receptacle front face. Insulator rotated inside metal body. Shell size Square flange receptacle (type ) Jam nut receptacle (type 7) Plug (type 6) Solder mount receptacle (type IH) Square flange receptacle (type 2H) Large square flange receptacle (type 2H spec. 2) Jam nut receptacle (type 7H) 1 155 92 9 11 5 152 27 18 23 27 184 155 315 18 275 292 295 273 234 331 338 Shell size Layout N W X Y Z 18 2 22 24 8 11 32 39 41 21 41 55 19 31 61 18 62 85 238 63 45 39 3 3 9 9 8 1 14 18 2 22 24 6 1 13 22 26 33 39 49 6 8 11 21 23 29 38 42 9 13 19 23 28 31 39 45 55 7 9 13 17 21 26 32 37 43 1 21 26 33 41 47 55 18 24 29 34 4 56 6 7 2 25 38 45 52 63 86 96 115 119 138 318 144 6 135 135 142 5 225 18 241 222 333 252 225 175 264 226 315 255 27 34 265 347 333 6 349 314 324 WPNEN3646WUSEN1 Copyright SOURIAU Jul 214 SOURIAU is a registered trademark. All information in this document presents only general particulars and shall not form part of any contract. All rights reserved to SOURIAU for changes without prior notification or public announcement. Any duplication is prohibited, unless approved in writing. 6