COAXIAL CABLES Indoor Distribution Cables MODEL CCH-7 CCI-74 CCI-7 CCSB7 CCIB7 CCI-79 CCI-90 CCS-90 CCIB90 REF. 206 206 222 200 202 22 220 208 204 Inner conductor Dielectric Outer conductor Outer sheath Attenuation/00m 47 MHz 00 MHz 230 MHz 470 MHz 862 MHz 90 MHz 70 MHz 20 MHz (tape) + (braid) white polyolefin (LSOH) ** (tape + (braid) PVC black 6. All the cables are manufactured using the Physical Process. Advantages: high mechanical strength, optimum electrical isolation and good stability of characteristics over time. *Braid is highly thick (coverage factor: 70%). **LSOH: Low Smoke Zero Halogen. Outer sheath of the CCH-7 does not contain halogens. It is flame retardant (EN/IEC 60332-3), the density of the smoke produced when the cable is burnt is very low (EN/IEC 6034-2) and the fumes are nontoxic (IEC 6074-2). (tape) + (braid) (tape) + (braid) * (tape) + (braid) Characteristics impedance Ω 7 ±3 Supply unit reel 20 m reel 20 m.0 6,3 7 8.9 3.2 9. 27.0 29.8 6. 9. 9.6 2.0 32. * 6. 9. 9.6 2.0 32. 6. 9. 9.6 2.0 32. reel 20 m Preparing the cable CCI-7 to fit the CTF-2 connector CCI-7 inner conductor 8 dielectric outer conductor CFR-680 3 23
COAXIAL CABLES CATV Trunk&Feeder Cables MODEL CCT-7 CCT-2 CCTB2 CCT-60 REF. 20 24 203 207 Inner conductor (copper) / diameter.0.6 3. Dielectric (Foam polythene) / diameter 7. 3 Outer conductor / diameter Al + Al / 6.3 Al + / 7.8 Al (tube) / Characteristics impedance Ω 7 ±3 Outer sheath (black polythene) / diameter 7 0.2.4 Max Attenuation at 20 C DC resistance of: - inner conductor - outer conductor f = 00 MHz 00 MHz 600 MHz 70 MHz 862 MHz 90 MHz 70 MHz 20 MHz 8.2 3.4 4.4 9. 27.0 29.8 Ω/00m.72.4 Velocity ratio of propagation % 77 88 Nominal capacitance pf/m 0 Minimum bending radius cm 7 8 3 Pulling tension dan 40 60 00 Weigth kg/00m 4.2 8.6 20 6.2 0..0 2.3 3..2 20. 23.0 0.9.2 2. 3.0.4 6. 6. 7. 0.2. 0.33 0.9 Supply uit (6x) reel 00m reel 00m reel 200m Preparing the cable CCT-2 to fit the CTP-2 connector 0 0 () CCT-2 CTP-2 24
CABLE CONNECTORS Connectors for Indoor Distribution Cables CFR-680 CTF-90 2377 2368 F CONECTORS Screw-on plug. Use cable: CCS, CCH, CCI, CCIB, CCT-7. Crimp plug. Use cable: CCS, CCH, CCI, CCIB, CCT-7. UCF-70 TOOL Crimp pliers for CTF-90 connector. 2377 2368 237 FDH-2 FRH-08 ARF-00 CFD-00 FAR-900 237 230 2360 08 23 F ADAPTERS Joining connector: F female - F female. Joining connector: F male - F male. Fast-fit adapter, F male. 90 degree adapter: Fast-fit elbow F connector.. 90 degree adapter: F male - F female. CAD CHD-90 02 03 IEC CONNECTORS Elbow plug. Elbow jack. 23 230 2360 TBF-0 TIF-00 TIF-02 2364 236 2366 CONNECTOR TY ADAPTERS F female - BNC male. IEC male - F female. IEC female - F mele. 2366 02 03 Connectors for CATV Trunk & Feeder Cables CTF-2 CPF-60 23 2689 F CONNECTORS Crimp F plug. Material: nickeled brass. Use cable: CCT-2. F plug. Material: nickeled brass. Use cable: CCT-60. CMC-60 CTP-2 CLP-2 CLP-40 382 22 20 2 Pin /8". Chromate coating aluminium. Use cable. CCT-2. Pin /8. Nickeled brass. Use cable: CCT-2. /8. Chromate coating aluminium. Use cable. CCT-60. Pin /8. Chromate coating aluminium. Use cable: CCT-60. 382 2 SAI-3 EHP-62 CMM-80 640 38 383 ADAPTERS-DOUBLE F Double female. Nickeled brass. /8 Double female. Nickeled brass. /8 Double male. Nickeled brass. TCF-80 TTF-090 6 27 ADAPTADERS F female - /8". Nickeled brass. /8 female - F male. Nickeled brass. 383 6 UCF-70 PLC-60 8 TOOLS Hex crimp tool for CTF-2 connector. for preparing the CCT-60 cable to fit pin /8 connectors. CTF-07 222 7Ω LOAD F type. For loading an F port. Idem a /8" port through the TCF-80 adapter. Nickeled brass. 222 2
DATA TRANSMISSION CABLES UTP (unshielded twisted pair) Cables 022 023 UTP cable, 4-pair, Cat E, 00 MHz. UTP cable, 4-pair, Cat 6, 20 MHz, halogen free. DESCRIPTION 022 023 Number of pairs 4 CONDUCTOR Total number of conductors 8 Conductor material Solid bare copper Wire gauge 24 AWG 23 AWG Conductor diameter Ø 0. Ø 0.7 Elongation rate % Insulate material HD - Polyethylene Nominal insulate wall thickness 0.8 0.9 INSULATE CABLING Insulate diameter Ø 0.88 ±0.0 Ø 0.96 ±0.0 Elogation rate 300 Pair : Blue & White/Blue Pair colour Pair 2: Orange & White/Orange Pair 3: Green & White/Green Pair 4: Brown & Whte/Brown Order of the pair see picture Cross filler Tape T - 0.02x20 conductor insulation rip cord Sheath material PVC LSZH OUTER SHEATH Sheath colour Rip cord Min thickness White 200Dx3 0.40 conductor Nominal diameter Ø.20 ±0.30 Ø 6.20 ±0.30 insulation ELECTRICAL CHARACTERISTICS 022 023 Max conductor DC resistance 20ºC Ω/00m 9. 7. Unbalance of pair DC resistance 20ºC % 2. Dielectric strength between pairs kv/min.0 Insulation resistance MΩ km 00 Capacitance nf/00m.6 Unbalance of capacitance pf/00m 330 Characteristics impedance Ω 00 ± Return loss 20.0 Max delay ns/00m 4.0 Max insertion loss MHZ 4 MHz 0 MHz 6 MHz 2.0 4.0 6.4 8.2 2.0 3.8 7. 20 MHz 9.2 8.4 3.2 MHz.6 0.6 62. MHZ 00 MHz 20 MHz 2.7.4 9.8 29.0 32.8 Min Near End Cross Talk MHZ 4 MHz 0 MHz 6 MHz 20 MHz 3.2 MHz 62. MHZ 00 MHz 20 MHz 6 6.3 0.3 47.2 4.8 42.9 38.4 3 74.3 6 9.3 6.2.9 47.4 44.3 39.8 38.3 separator tape rip cord OTHER CHARACTERISTICS 022 023 Operating temperature -20º to +7ºC Min bend radius 8 x D Net weight 28 kg/km 40 kg/km Supply unit reel 000 ft 26
27