The color scheme for the fibers in the cable complies with the Telcordia (formerly Bellcore) specification.

Transcription

1 10 Cables The cables referred to below are provided with standard single- and multimode fibers. Other commercially available fibers can be provided on request. The bare fibers are colored in all cases with UV-cured acrylate. The process employed is state of the art and guarantees a uniform, smooth surface. The color scheme for the fibers in the cable complies with the Telcordia (formerly Bellcore) specification. Equipotential bonding and lightning protection measures are not required because all the cables employed are free of metal. Universal Cables A link failure in a modern FO network can involve considerable costs for the operator. The cables must therefore meet stringent mechanical requirements and be able to withstand environmental effects such as frost and humidity. Accordingly, our FutureLink direct burial, duct and universal cables have been designed to be particularly rugged and resilient. For campus cabling applications there are MPC (Multi-Purpose Cables = in- and outdoor cables) available. MPC feature not only the outdoor characteristics (e.g. enhanced rodent protection, water blocking and UV resistance) but also the LS0H characteristics of the use FRNC material required for deployment in buildings. The cable sheaths are colored black. We provide two design variants: Minibundle cables: Cables with multifiber buffer tubes stranded around a central non-metallic (dielectric) strength member. Central tube cables: Cables with a central multifiber buffer tube and strength members partially integrated in the sheath. If a bundle is to contain more than the maximum of twelve fibers that can be distinguished visually, we group the fibers in twelves with a colored binder.

2 F u t u r e L i n k M o d u l a r - S y s t e m C a t a l o g I s s u e This avoids an additional stress being imposed on the individual optical fiber by the ring marking which would otherwise have to be used to identify more than 12 individual fibers. If, for instance, water enters the cable through damage to the sheath, a special filling prevents the water from migrating inside the cable. This is achieved by swellable (dry) water blocking elements. The advantage of these so-called dry cables is their enhanced installation handling and the environmental protection. Indoor Cables The cables used for the building backbone (riser) and horizontal subsystems are non-corrosive (to IEC ), low-smoke (to IEC 61034) and flame-retardant indoor cables (tested to IEC or 3 and DIN VDE 0472, part 804, test type C). The color of the cable sheaths is, unless stated otherwise, yellow for single-mode and orange for multimode fiber cables. Cables With the new tight buffer coating TB3 our indoor FO cabling is even more installation-friendly, zero halogen and flame retardant. In addition, it has the following advantages: installation-friendly as no filling compound, very easy to strip, long stripping lengths of about 150 mm, rapid, direct field connectorization, direct assembly of the tight buffer, flame retardant to IEC non-corrosive (halogen free). There are multifiber indoor, breakout and patch cables. Multifiber indoor cables consist of stranded tight buffers served with non-metallic strength members. Breakout cables comprise tight-buffered single-fiber cables (tight buffers each in own sheath) stranded together with a central tensile strength member under an additional shared sheath.

3 12 By virtue of their similarities, multifiber indoor cables are often also called mini-breakout or MIC cables. Simplex and duplex cords are singlefiber or Zipcord cables with tight buffers. All FutureLink indoor FO cables are metal-free and hence EMC immune require no grounding require no lightning protection require no equipotential bonding. Pre-assembled Multifiber Cables, Pigtails and Patch Cords To enable FO cables to be joined and separated again rapidly without damage, they are terminated with connectors. In addition to pigtails and patch cords, Corning also supply multifiber cables in factory pre-assembled form such as MPC, MIC (Multifiber Indoor Cable) and breakout cables. The connectors available include not only the well-known SC and ST types but also the small form factor MT-RJ connectors that terminate two fibers simultaneously. For these connectors there are two-fiber cables available with geometry optimally configured for the MT-RJ connector (MiniMIC). For making the transition from MT-RJ to SC and ST single-fiber connectors there are suitable MiniZip cables available. Pre-assembled cables provide the possibility of implementing a complete plug & play solution. When such a solution is adopted with accurate dimensioning and suitable cable routing, it is possible to install even large cabling systems rapidly. Another advantage is that fusion splicing is not necessary. The plug & play technique is also prefered in clean envirement applications.

4 F u t u r e L i n k M o d u l a r - S y s t e m C a t a l o g I s s u e Technical Data Standard single-mode fiber Mode-field diameter (µm) Typical attenuation in the cable at 1310/1550 nm (db/km) Mini- and Maxibundle (-tube) design Tight buffer with 900 µm or 700 µm Chromatic dispersion at 1310/1550 nm (ps/(nm x km)) 9.2 ± / / / 18.0 Standard multimode fiber Core diameter (µm) Typical attenuation in the cable at 850/1300 nm (db/km) Mini- and Maxibundle (-tube) design Tight buffer with 900 µm or 700 µm Bandwidth* at 850/1300 nm (MHz x km) Cables 50 ± ± / / / / / / 600 * Fibers with other bandwidths are available on request, e.g. 600/1200 at 50 µm.

5 14 MPC (Multi-Purpose Cables) Minibundle MPC A DQ(ZN)H Application FutureLink MPC (multi-purpose cables) can be used both indoors and outdoors for campus backbone and building backbone (riser) cabling. These cables are specially designed for placement in ducts, for pulling into duct systems or for direct burial. Characteristics Central member, metal-free FRNC sheath Swellable elements Strength members, metal-free Minibundle with up to 12 fibers, filled Low-smoke to IEC and zero-halogen (LS0H) Flame-retardant to IEC and non-corrosive to IEC (FRNC) Non-metallic design No grounding or potential equalisation problems Dry cable core Water blocking to IEC F5 UV resistant Suitable for use outdoors and indoors Direct burial in the ground possible Outside dia. (mm) Weight (kg/km) Tensile load for installation (N) Bend radius for installation (mm) Bend radius in operation (mm) Fire rating (MJ/m) Temperature range Installation and assembly Operation Transport and storage 5 C to +50 C 30 C to +70 C 40 C to +70 C Ordering information Type designation A-DQ(ZN)H 2x6 A-DQ(ZN)H 4x6 A-DQ(ZN)H 3x12 A-DQ(ZN)H 4x12 A-DQ(ZN)H 5x LCXLM1-D4012-U701 LCXLM1-D4024-U701 LCXLM1-D4036-U701 LCXLM1-D4048-U701 LCXLM1-D4060-U701 LCXLM1-K4012-J701 LCXLM1-K4024-J701 LCXLM1-K4036-J701 LCXLM1-K4048-J701 LCXLM1-K4060-J701 LCXLM1-M4012-H701 LCXLM1-M4024-H701 LCXLM1-M4036-H701 LCXLM1-M4048-H701 LCXLM1-M4060-H701

6 F u t u r e L i n k M o d u l a r - S y s t e m C a t a l o g I s s u e MPC (Multi-Purpose Cables) Minibundle MPC A DQ(BN)H Application FutureLink MPC (multi-purpose cables) can be used both indoors and outdoors for campus backbone and building backbone (riser) cabling. These cables are specially designed for placement in ducts, for pulling into duct systems or for direct burial. Characteristics Dummy element Central member, metal-free Swellable elements Glass yarn armor, metal-free Buffer tube with up to 12 fibers, filled FRNC sheath Low-smoke to IEC and zero-halogen (LS0H) Flame-retardant to IEC and non-corrosive to IEC (FRNC) Non-metallic design No grounding or potential equalisation problems Enhanced rodent protection Dry cable core Water blocking to IEC F5 UV resistant Suitable for use outdoors and indoors Direct burial in the ground possible Outside dia. (mm) Weight (kg/km) Tensile load for installation (N) Bend radius for Temperature range installation (mm) Bend radius in operation (mm) Fire rating (MJ/m) Cables Installation and assembly Operation Transport and storage 5 C to +50 C 30 C to +70 C 40 C to +70 C Ordering information Type designation A-DQ(BN)H 2x12 A-DQ(BN)H 3x12 A-DQ(BN)H 4x12 A-DQ(BN)H 5x LCXLM1-D4024-U700 LCXLM1-D4036-U700 LCXLM1-D4048-U700 LCXLM1-D4060-U700 LCXLM1-K4024-J700 LCXLM1-K4036-J700 LCXLM1-K4048-J700 LCXLM1-K4060-J700 LCXLM1-M4024-H700 LCXLM1-M4036-H700 LCXLM1-M4048-H700 LCXLM1-M4060-H700

7 16 MPC (Multi-Purpose Cables) Maxibundle (Maxitube) MPC A D(BN)H Application FutureLink MPC (multi-purpose cables) can be used both indoors and outdoors for campus backbone and building backbone (riser) cabling as well as for the horizontal cabling between the floor distributor (horizontal cross-connect) and the terminal equipment/ workstations (Fiber-to-the-Desk). These cables are specially designed for placement in ducts, for pulling into duct systems or for direct burial. Characteristics Maxitube with up to 24 fibers, filled Glass yarn armor, metal-free FRNC sheath Rip cord Low-smoke to IEC and zero-halogen (LS0H) Flame-retardant to IEC and non-corrosive to IEC (FRNC) Non metallic design No grounding or potential equalisation problems Enhanced rodent protection Water blocking to IEC F5 UV resistant Suitable for use outdoors and indoors Direct burial in the ground possible Small diameter Outside dia. (mm) Weight (kg/km) Tensile load for installation (N) Bend radius for installation (mm) Bend radius in operation (mm) Fire rating (MJ/m) Temperature range Ordering information Installation and assembly Operation Transport and storage 5 C to +50 C 20 C to +60 C 25 C to +70 C Type designation A-D(BN)H 1x4 A-D(BN)H 1x6 A-D(BN)H 1x8 A-D(BN)H 1x12 A-D(BN)H 1x16 A-D(BN)H 1x LCXLM1-D0004-U700 LCXLM1-D0006-U700 LCXLM1-D0008-U700 LCXLM1-D0012-U700 LCXLM1-D0016-U700 LCXLM1-D0024-U700 LCXLM1-K0004-J700 LCXLM1-K0006-J700 LCXLM1-K0008-J700 LCXLM1-K0012-J700 LCXLM1-K0016-J700 LCXLM1-K0024-J700 LCXLM1-M0004-H700 LCXLM1-M0006-H700 LCXLM1-M0008-H700 LCXLM1-M0012-H700 LCXLM1-M0016-H700 LCXLM1-M0024-H700

8 F u t u r e L i n k M o d u l a r - S y s t e m C a t a l o g I s s u e MPC (Multi-Purpose Cables) MPC with Tight Buffers A VB(BN)H... TB3 FRNC Application FutureLink MPC (multi-purpose cables) can be employed both indoors and outdoors for campus backbone and building backbone (riser) cabling as well as for the horizontal cabling between the floor distributor (horizontal cross-connect) and the terminal equipment/ workstations (Fiber-to-the-Desk). These cables are specially designed for placement in ducts, for pulling into duct systems or for direct burial. Being packaged in 900 mm tight buffers, the fibers can be easily connectorized with field-installable connectors. Characteristics Maxitube with up to 24 tight buffered fibers (900 µm) Glass yarn armor, metal-free FRNC sheath Swellable elements Temperature range Installation and assembly Operation Transport and storage 5 C to +50 C 30 C to +70 C 30 C to +70 C Tight buffers with 900 µm diameter, TB3 design easy stripable Low-smoke to IEC and zero-halogen (LS0H) Flame-retardant to IEC and non-corrosive to IEC (FRNC) Non-metallic design No grounding or potential equalisation problems Enhanced rodent protection Water blocking to IEC F5 UV resistant Suitable for use outdoors and indoors Direct burial in the ground possible Small diameter Specially suitable with fieldinstallable UniCam connectors Outside dia. (mm) Weight (kg/km) Tensile load for installation (N) Bend radius for installation (mm) Bend radius in operation (mm) Fire rating (MJ/m) N 1500 N 1500 N 1500 N 1500 N Cables Ordering information Type designation A-VB(BN)H 1x4... TB3 A-VB(BN)H 1x6... TB3 A-VB(BN)H 1x8... TB3 A-VB(BN)H 1x12... TB3 A-VB(BN)H 1x24... TB LCXLM2-G0004-U700 LCXLM2-G0006-U700 LCXLM2-G0008-U700 LCXLM2-G0012-U700 LCXLM2-G0024-U700 LCXLM2-M0004-J700 LCXLM2-M0006-J700 LCXLM2-M0008-J700 LCXLM2-M0012-J700 LCXLM2-M0024-J700 LCXLM2-N0004-H700 LCXLM2-N0006-H700 LCXLM2-N0008-H700 LCXLM2-N0012-H700 LCXLM2-N0024-H700

9 18 Indoor Cables Indoor Maxibundle (Maxitube) Cables J DH Application FutureLink provides all the FO products required for installing campus backbone and building backbone (riser) cabling as well as for the horizontal cabling between the floor distributor (horizontal cross-connect) and the terminal equipment/ workstations (Fiber-to-the-Desk). The indoor maxibundle cables are particularly suitable for placing and pulling into cable conduits and shafts inside buildings. Characteristics FRNC sheath Strength members, metal-free Buffer tube with up to 12 fibers, filled Fiber Rip cord Low-smoke to IEC and zero-halogen (LS0H) Flame-retardant to IEC and non-corrosive to IEC (FRNC) Non-metallic design No grounding or potential equalisation problems Small diameter Low weight Low fire load rating Outside dia. (mm) Weight (kg/km) Tensile load for installation (N) Bend radius for Temperature range installation (mm) Bend radius in operation (mm) Fire rating (MJ/m) Installation and assembly Operation Transport and storage 5 C to +50 C 20 C to +60 C 25 C to +70 C Ordering information Type designation J-DH 1x4 J-DH 1x6 J-DH 1x8 J-DH 1x LCXLI1-D0004-U700 LCXLI1-D0006-U700 LCXLI1-D0008-U700 LCXLI1-D0012-U700 LCXLI1-K0004-J700 LCXLI1-K0006-J700 LCXLI1-K0008-J700 LCXLI1-K0012-J700 LCXLI1-M0004-H700 LCXLI1-M0006-H700 LCXLI1-M0008-H700 LCXLI1-M0012-H700

10 F u t u r e L i n k M o d u l a r - S y s t e m C a t a l o g I s s u e Indoor Cables Indoor Minibundle Cables J DH Application FutureLink provides all the FO products required for installing campus backbone and building backbone (riser) cabling as well as for the horizontal cabling between the floor distributor (horizontal cross-connect) and the terminal equipment/ workstations (Fiber-to-the-Desk). The indoor minibundle cables are particularly suitable for placing and pulling into cable conduits and shafts inside buildings, in order to connect distributors with high fiber counts. Characteristics Dummy element FRNC sheath Central member, metal-free Buffer tube with up to 12 fibers, filled Low-smoke to IEC and zero-halogen (LS0H) Flame-retardant to IEC and non-corrosive to IEC (FRNC) Non-metallic design No grounding or potential equalisation problems Small diameter Low weight Low fire load rating Outside dia. (mm) Weight (kg/km) Tensile load for installation (N) Bend radius for installation (mm) Bend radius in operation (mm) Fire rating (MJ/m) Cables Temperature range Ordering information Installation and assembly Operation Transport and storage 5 C to +50 C 20 C to +60 C 25 C to +70 C Type designation J-DH 4x6 J-DH 3x12 J-DH 4x12 J-DH 5x12 J-DH 6x12 J-DH 8x12 J-DH 10x12 J-DH 12x LCXLI1-D4024-U700 LCXLI1-D4036-U700 LCXLI1-D4048-U700 LCXLI1-D4060-U700 LCXLI1-D4072-U700 LCXLI1-D4096-U700 LCXLI1-D4120-U700 LCXLI1-D4144-U700 LCXLI1-K4024-J700 LCXLI1-K4036-J700 LCXLI1-K4048-J700 LCXLI1-K4060-J700 LCXLI1-K4072-J700 LCXLI1-K4096-J700 LCXLI1-K4120-J700 LCXLI1-K4144-J700 LCXLI1-M4024-H700 LCXLI1-M4036-H700 LCXLI1-M4048-H700 LCXLI1-M4060-H700 LCXLI1-M4072-H700 LCXLI1-M4096-H700 LCXLI1-M4120-H700 LCXLI1-M4144-H700

11 20 Indoor Cables Multifiber Indoor Cables (MIC) J VH... TB3 FRNC Application The multifiber indoor cables are particularly suitable for placing and pulling into cable conduits and shafts (building backbone and horizontal subsystems) and as connection cable between distributors and to connect workstations inside buildings (FttD). They can also be used as inter-building cables laid in dry conduits. Characteristics Central member, metal-free Tight buffer Strength members, metal-free FRNC sheath Rip cord Especially suitable with field-installable UniCam connectors Low-smoke to IEC and zero-halogen (LS0H) Flame-retardant to IEC and non-corrosive to IEC (FRNC) Non-metallic design No grounding or potential equalisation problems Tight buffers of 900 µm diameter (TB3) Dry Outside dia. (mm) Weight (kg/km) Tensile load for installation (N) Bend radius for installation (mm) Bend radius in operation (mm) Fire rating (MJ/m) Temperature range Ordering information Installation and assembly Operation Transport and storage 5 C to +50 C 20 C to +60 C 25 C to +70 C Type designation J-VH 2 J-VH 4 J-VH 6 J-VH 8 J-VH 12 J-VH 16 J-VH LCXLI2-D1002-U700 LCXLI2-D1004-U700 LCXLI2-D1006-U700 LCXLI2-D1008-U700 LCXLI2-D1012-U700 LCXLI2-D1016-U700 LCXLI2-D1024-U700 LCXLI2-L1002-J700 LCXLI2-L1004-J700 LCXLI2-L1006-J700 LCXLI2-L1008-J700 LCXLI2-L1012-J700 LCXLI2-L1016-J700 LCXLI2-L1024-J700 LCXLI2-M1002-H700 LCXLI2-M1004-H700 LCXLI2-M1006-H700 LCXLI2-M1008-H700 LCXLI2-M1012-H700 LCXLI2-M1016-H700 LCXLI2-M1024-H700

12 F u t u r e L i n k M o d u l a r - S y s t e m C a t a l o g I s s u e Indoor Cables Breakout Cables T-VHH... TB3 FRNC Application The breakout cables are particularly suitable for placing and pulling into cable conduits and shafts (building backbone and horizontal subsystems), as connection cable between distributors and to connect workstations inside buildings (FttD). They can also be used as inter-building cables laid in dry conduits. The basic elements offer additional protection to the individual buffers. Characteristics Central member, metal-free Tight buffer Strength members, metal-free Basic element of 2.9 mm diameter Rip cord FRNC outer sheath Especially suitable with field-installable UniCam connectors Low-smoke to IEC 1034 and zero-halogen (LS0H) Flame-retardant to IEC and non-corrosive to IEC (FRNC) Non-metallic design No grounding or potential equalisation problems Basic element of 2.9 mm diameter with additional strength members T-VHH cables are also available with basic elements of 2.2 mm diameter Dry Tight buffers of 900 µm diameter (TB3) Outside dia. (mm) Weight (kg/km) Bend radius for installation (mm) Bend radius in operation (mm) Fire rating (MJ/m) Tensile load for installation [N] x Cables Temperature range Ordering information Installation and assembly Operation Transport and storage 5 C to +50 C 20 C to +60 C 25 C to +70 C Type designation T-VHH 2 T-VHH 4 T-VHH 6 T-VHH 8 T-VHH LCXLI2-D3002-U720 LCXLI2-D3004-U720 LCXLI2-D3006-U720 LCXLI2-D3008-U720 LCXLI2-D3012-U720 LCXLI2-L3002-J720 LCXLI2-L3004-J720 LCXLI2-L3006-J720 LCXLI2-L3008-J720 LCXLI2-L3012-J720 LCXLI2-M3002-H720 LCXLI2-M3004-H720 LCXLI2-M3006-H720 LCXLI2-M3008-H720 LCXLI2-M3012-H720

13 22 Indoor Cables Simplex and Duplex Cord J VH... TB3 FRNC Application The simplex and duplex cords are particularly suitable for placing and pulling into cable raceways, as patch and connection cords. These cords are also used by assembly houses for making patch cords and cable pigtails. Characteristics Tight buffer 900 µm FRNC sheath Strength members, metal-free Especially suitable with field-installable UniCam connectors Low-smoke to IEC and zero-halogen (LS0H) Flame-retardant to IEC and non-corrosive to IEC (FRNC) Dry Tight buffers of 900 µm diameter (TB3) Basic element of 2.9 mm diameter with additional strength members simplex and duplex cords are also available with basic elements of 2.2 mm diameter Outside dia. (mm) x Weight (kg/km) Tensile load for Temperature range installation (N) Bend radius for installation (mm) Bend radius in operation (mm) Installation and assembly Operation Transport and storage 5 C to +50 C 20 C to +60 C 25 C to +70 C Ordering information Type designation J-VH 1 J-VH 2x1 1 2 LCXLI2-D2001-U720 LCXLI2-D2002-U720 LCXLI2-L2001-J720 LCXLI2-L2002-J720 LCXLI2-M2001-H720 LCXLI2-M2002-H720 Special colors Sheath color: Green Sheath color: Blue J-VH 2x1 2 LCXLI2-L2002-J721 LCXLI2-M2002-H721

14 F u t u r e L i n k M o d u l a r - S y s t e m C a t a l o g I s s u e Indoor Cables Tight Buffer V E9/G50/G62.5 Application Pigtails, made out of tight buffers, are used for the connection between patch panel front and splice trays, where they are spliced to the incoming or outgoing cables. As the pigtails are protected by the patch panel box, it is possible to use 900 µm or 700 µm tight buffers instead of cable pigtails. These tight buffers are used mainly by assembly houses to make pigtails. Characteristics Low-smoke to IEC and zero-halogen (LS0H) Flame-retardant to IEC and non-corrosive to IEC (FRNC) Without filling component (Dry) Easily strippable (TB for 900 µm and TB3 for 700 µm) Cables Fiber 125/250 µm Jacket of 900 µm or 700 µm diameter Outside dia. (mm) Weight (kg/km) One step TB Tight buffer up to 1.5 m strippable TB3 Tight buffer up to 150 mm strippable strip length [m] Bend radius for installation (mm) Bend radius in operation (mm) Ordering information Type designation Fiber type Buffer color V-E9 (900 µm) V-G50 (900 µm) V-G62.5 (900 µm) Yellow Green Blue LCXLI2-EX001-U700-GE LCXLI2-LX001-J700-GN LCXLI2-MX001-H700-BL V-E9 R (700 µm) V-G50 R (700 µm) V-G62.5 R (700 µm) Yellow Green Blue LCXLI2-EX001-U701-GE LCXLI2-LX001-J701-GN LCXLI2-MX001-H701-BL

15 24 Indoor Cables MiniMIC J VH2 TB3 R FRNC Application The MiniMIC is particularly suitable for making patch and connection cords for use inside buildings. It is primarily used for termination of two-fiber connectors (MT-RJ) by assembly houses. Characteristics Low-smoke to IEC and zero-halogen (LS0H) Flame-retardant to IEC and non-corrosive to IEC (FRNC) Non-metallic design Tight-buffered fiber of 700 µm diameter (TB3) Dry Outside dia. (mm) Weight (kg/km) Tensile load for installation (N) Bend radius for installation (mm) Bend radius in operation (mm) Fire rating (MJ/m) Tight buffer 700 µm Strength member, dielectric FRNC sheath Temperature range Installation and assembly 5 C to +50 C Operation 20 C to +60 C Transport and storage 25 C to +70 C Ordering information Type designation J-VH2 TB3 R 2 LCXLI2-G1002-U701 LCXLI2-M1002-J701 LCXLI2-M1002-H701

16 F u t u r e L i n k M o d u l a r - S y s t e m C a t a l o g I s s u e Indoor Cables MiniZip J VH 2x1 TB3 R FRNC Application The MiniZip is particularly suitable for making adapter and connection cords for the use inside buildings. It is primarily used by assembly houses for terminating multifiber connectors (MT-RJ) in combination with single-fiber connectors. Characteristics Tight buffer 700 µm FRNC sheath Strength members, metal-free Low-smoke to IEC and zero-halogen (LS0H) Flame-retardant to IEC and non-corrosive to IEC (FRNC) Non-metallic design Tight-buffered fiber of 700 µm diameter (TB3) Dry Outside dia. (mm) Weight (kg/km) Tensile load for installation (N) Bend radius for installation (mm) Bend radius in operation (mm) Fire rating (MJ/m) x Temperature range Installation and assembly 5 C to +50 C Operation 20 C to +60 C Transport and storage 25 C to +70 C Cables Ordering information Type designation J-VH 2x1 TB3 R 2 LCXLI2-G2002-U740 LCXLI2-M2002-J740 LCXLI2-M2002-H740

17 26 Pre-assembled Multifiber Cables MPC (Multi-Purpose Cables) Order Number Scheme Order Examples Cable type MPC A-D(BN)H up to 24 fibers Single-mode Multimode Multimode Fiber count Connector type* LCALMA - - A B Length in m C upon request A end E end Connector Connector 0 = none 1 = ST 1 = ST 2 = SC 2 = SC 3 = SC duplex 3 = SC duplex 4 = MT-RJ (no pin) 4 = MT-RJ (no pin) 5 = MT-RJ (pins) 5 = MT-RJ (pins) Maxibundle MPC A-D(BN)H... Pre-assembled MPC A-D(BN)H 1X12G50/ B F1200, 80 m long, zero-halogen, 50 µm fiber, non-metallic rodent protection, both ends terminated with 12 SC connectors : LCALMA-B Pre-assembled MPC A-D(BN)H 1X8G62.5/ B F600, 1250 m long, zero-halogen, 62.5 µm fiber, non-metallic rodent protection, E end terminated with 8 ST connectors and A end terminated with 4 MT-RJ connectors with pins : LCALMA-C * When generating the order number the higher number of connector type is followed by the lower on The assembled multifiber cables are supplied as standard with a leg length of 0.75 m and a pulling grip at each end. If there are more than 4 fibers, the ends are stepped in 4 cm increments (2 fibers each).

18 F u t u r e L i n k M o d u l a r - S y s t e m C a t a l o g I s s u e Pre-assembled Multifiber Cables MPC with Tight Buffers (Multi-Purpose Cables) Order Number Scheme Order Examples Cable type MPC with tight buffers (TB 3) LCALMH - - Tight buffer MPC A-VB(BN)H... A-VB(BN)H up to 24 fibers Pre-assembled MPC with tight buffers, Single-mode Multimode Multimode A B C Length in m upon request A-VB(BN)H 1X24G50/ B F1200, TB3 FRNC, 70 m long, zero-halogen, 50 µm fiber, Fiber count non-metallic rodent protection, both ends terminated with 24 ST connectors : LCALMH-B Connector type* A end Connector * When generating the order number the higher number of connector type is followed by the lower on E end Connector 0 = none 1 = ST 1 = ST 2 = SC 2 = SC 3 = SC duplex 3 = SC duplex 4 = MT-RJ (no pin) 4 = MT-RJ (no pin) 5 = MT-RJ (pins) 5 = MT-RJ (pins) Pre-assembled MPC A-VB(BN)H 1X6G62.5/ B F600, TB3 FRNC, 1550 m long, zero-halogen, 62.5 µm fiber, non-metallic rodent protection, A end terminated with 3 SC duplex connectors and E end terminated with 3 MT-RJ connectos with pins : LCALMH-C Pre-assembled Cables The assembled multifiber cables are supplied as standard with a leg length of 0.75 m and a pulling grip at each end. If there are more than 4 fibers, the ends are stepped in 4 cm increments (2 fibers each).

19 28 Pre-assembled Multifiber Cables Multifiber Indoor Cables (MIC) Order Number Scheme Order Examples Cable type MIC J-VH up to 24 fibers LCALIG - - Multifiber indoor cable J-VH...TB3 FRNC (Tight-buffers of 900 µm diameter) Single-mode Multimode Multimode A B C Length in m upon request Pre-assembled MIC J-VH 4G62.5/ B F600, TB3 FRNC, Fiber count m long, zero-halogen, 62.5 µm fiber, A end terminated with 4 SC connectors and E end terminated with 4 ST connectors : LCALIG-C Connector type* A end E end Connector Connector 0 = none 1 = ST 1 = ST 2 = SC 2 = SC 3 = SC duplex 3 = SC duplex 4 = MT-RJ (no pin) 4 = MT-RJ (no pin) 5 = MT-RJ (pins) 5 = MT-RJ (pins) Pre-assembled MIC J-VH 24E9/ F H18, TB3 FRNC, 1010 m long, zero-halogen, 9 µm fiber, E end terminated with 12 SC duplex connectors and A end terminated with 12 MT-RJ connectors with pins : LCALIG-A * When generating the order number the higher number of connector type is followed by the lower on The assembled multifiber cables are supplied as standard with a leg length of 0.75 m and a pulling grip at each end. If there are more than 4 fibers, the ends are stepped in 4 cm increments (2 fibers each).

20 F u t u r e L i n k M o d u l a r - S y s t e m C a t a l o g I s s u e Pre-assembled Multifiber Cables Breakout Cables Order Number Scheme Order Examples Cable type Breakout T-VHH LCALIF - - Breakout cable T-VHH... (basic elements of 2.9 mm diameter) up to 24 fibers Pre-assembled breakout cable Single-mode Multimode Multimode Fiber count A B C Length in m upon request T-VHH 6G50/ B F1200 TB3 FRNC, 50 m long, zero-halogen, orange, 50 µm fiber, both ends terminated with 3 SC duplex connectors : LCALIF-B Connector type* A end Connector * When generating the order number the higher number of connector type is followed by the lower on E end Connector 0 = none 1 = ST 1 = ST 2 = SC 2 = SC 3 = SC duplex 3 = SC duplex 4 = MT-RJ (no pin) 4 = MT-RJ (no pin) 5 = MT-RJ (pins) 5 = MT-RJ (pins) Pre-assembled breakout cable T-VHH 2E9/ F H18 TB3 FRNC, 90 m long, zero-halogen, yellow, 9 µm fiber, both ends terminated with 2 ST connectors : LCALIF-A Pre-assembled Cables The assembled multifiber cables are supplied as standard with a leg length of 0.75 m and a pulling grip at each end. If there are more than 4 fibers, the ends are stepped in 4 cm increments (2 fibers each).

21 30 Cable Pigtails and Patch Cords Simplex Cords Order Number Scheme Ordering Examples Simplex cords Cable pigtails and patch cords Single-mode Multimode Multimode Basic element: Simplex 2.9 mm L C A L I A Length in dm (last 3 digits) B A to 990 dm C B to 1990 dm C to 2990 dm D to 3990 dm 1 Simplex cords J-VH 1G50/ B F1200 TB3 FRNC, 3 m long, zero-halogen, orange, 50 µm fiber, outside end: 1 x SC connector, inside end: 1 x ST connector. : LCALI2-B1321-A030 Tight buffer type 1) TB 2) TB3 1 up to 3 m in 0.5 m steps; 3 more than 3 m up to 10 m in 1.0 m steps; other length upon request J-VH 1G62.5/ B F600 TB3 FRNC 5 m long, zero-halogen, orange, 62.5 µm fiber, both ends terminated with ST connector. A end Connector E end Connector : LCALI2-C1311-A050 Connector type* 0 = none 1 = ST 1 = ST 2 = SC 2 = SC 1) TB Tight buffer up to 1.5 m strippable 2) TB3 Tight buffer up to 150 mm strippable For cable pigtails tight buffer type TB are recommended. For patch cords tight buffer type TB3 are recommended. * When generating the order number the higher number of connector type is followed by the lower on Cable pigtails and patch cords with PVC tight buffers (TB2) and PVC sheath are available upon request. Further fiber and connector types are available upon request.

22 F u t u r e L i n k M o d u l a r - S y s t e m C a t a l o g I s s u e Cable Pigtails and Patch Cords Duplex Cords Order Number Scheme Order Examples Duplex cords Cable pigtails and patch cords Single-mode Multimode Multimode Basic element: Duplex (Zipcord) 2.9 mm L C A L I A Length in dm (last 3 digits) B A to 990 dm C B to 1990 dm C to 2990 dm D to 3990 dm 2 Duplex cords J-VH 2 x 1G50/ B F1200 TB3 FRNC, 1.5 m long, zero-halogen, orange, 50 µm fiber, A end: 2 x SC connectors, E end: 2 x ST connectors. : LCALI2-B2321-A015 Tight buffer type Connector type* 1) TB 2) TB3 1) TB Tight buffer up to 1.5 m strippable 2) TB3 Tight buffer up to 150 mm strippable A end Connector For cable pigtails tight buffer type TB are recommended. For patch cords tight buffer type TB3 are recommended. * When generating the order number the higher number of connector type is followed by the lower on 1 up to 3 m in 0.5 m steps; 3 more than 3 up to 10 m in 1.0 m steps; other length upon request E end Connector 0 = none 1 = ST 1 = ST 2 = SC 2 = SC 3 = SC duplex 3 = SC duplex J-VH 2 x 1G62.5/ B F600 TB3 FRNC 20 m long, zero-halogen, orange, 62.5 µm fiber, E end: 2 x ST connectors, A end: SC duplex connector. : LCALI2-C2331-A200 Pre-assembled Cables Cable pigtails and patch cords with PVC tight buffers (TB2) PVC and sheath are available upon request. Further fiber and connector types are available upon request. Standard duplex patch cords are reversed in polarity (transmitter to receiver).

23 32 Cable Pigtails and Patch Cords with MT-RJ Connectors Order Number Scheme Cable pigtails and patch cords Single-mode Multimode Multimode Basic element: Duplex (Zipcord) for hybrid version Duplex (2 fiber MIC) for MT-RJ both ends Tight buffer type 1) TB L C A L I A Length in dm (last 3 digits) B A to 990 dm C B to 1990 dm C to 2990 dm D to 3990 dm 5 up to 3 m in 0.5 m steps; 7 more than 3 up to 10 m in 1.0 m steps; other length upon request 3 Terminated MT-RJ plugs Permanently installed cables are normally provided with pins at both ends. Patch cords do not have pins because the active components always contain pins. On the stated standard MT-RJ patch cords connectorized at both ends the polarity is reversed (transmitter to receiver). Order Examples Connector type* A end E end Connector Connector 0 = none 1 = ST 1 = ST 2 = SC 2 = SC 3 = SC duplex 3 = SC duplex 4 = MT-RJ (no pin) 4 = MT-RJ (no pin) 5 = MT-RJ (pins) 5 = MT-RJ (pins) J-VH 2 x 1G50/ B F1200 TB3 FRNC, 5 m long, zero-halogen, orange, 50 µm fiber, E end: 2 x SC connectors, A end: MT-RJ connector without pins. : LCALI2-B5342-A050 1) TB3 Tight buffer insulation FRNC up to 150 mm strippable * When generating the order number the higher number of connector type is followed by the lower on J-VH 2G62.5/ B F600 TB3 FRNC 220 m long, zero-halogen, orange, 62.5 µm fiber, both side terminated with MT-RJ connector with pins : LCALI2-C7355-C200 Cable pigtails and patch cords with PVC tight buffers (TB2) and PVC sheath are available upon request. Further fiber and connector types are available upon request.

24 F u t u r e L i n k M o d u l a r - S y s t e m C a t a l o g I s s u e Pigtails Order Number Scheme Order Examples Pigtails Single-mode Multimode Multimode Tight Buffer type: Pigtail buffer 900 µm (for ST & SC connectors only) Pigtail buffer 700 µm (for MT-RJ connectors only) Tight buffer type 1) TB L C A L I A Length in dm (last 3 digits) B A to 990 dm C B to 1990 dm up to 3 m in 0.5 m steps; 3 other length upon request 6 1 Pigtail V-E9/ F H18 TB, 2 m long; zero-halogen; single-mode fiber, A end: SC connector : LCALI2-A3120-A020 V-G62.5/ B F600 TB, 50 cm long; zero-halogen; 62.5 µm fiber, A end: MT-RJ connector with pins. : LCALI2-C6150-A005 A end E end Connector type Connector 1 = ST Connector 0 = none Further fiber and connector types are available on request. 1) TB 2 = SC 3 = SC duplex 4 = MT-RJ (no pin) 5 = MT-RJ (pins) Tight buffer up to 1.5 m strippable Pre-assembled Cables

25 34 Notes