Micro-USB connectors meeting requirements of USB 2.0 Standard

All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. NEW Micro-USB connectors meeting requirements of USB 2.0 Standard ZX Series Note: Contact us to ascertain whether a TID number has been acquired for an individual product. Overview Extremely small high reliability connectors complying with physical, electrical and environmental requirements of Micro-USB standard (USB 2.0). Receptacles and plugs are available in a wide variety of mounting and termination configurations, permitting their use in various applications. Features 1. Size reduction Compared with the standard Mini-B connectors, the size of ZX connectors is reduced by approximately 60% while still allowing a high-speed data transfer of 40 Mbps, specified in USB 2.0. 2. Receptacle styles Two interface configurations: Micro-B and Micro-AB in standard, mid-mount and reverse mounting styles. SMT and through-hole (shell) PC board terminations 3. Plug styles Corresponding to the receptacle styles, two interface configurations: Micro-B and Micro-A, with direct wire or PCB wire soldering. Several plug styles can be used for data transmission, earphone or charging applications. 4. High durability Unique contact and lock configuration assures high durability while maintaining easy insertion / disconnection. Fully mated condition (when mated with corresponding HRS connector) is confirmed by a definite tactile sensation 5. RoHS compliant All components and materials comply with the requirements of EU directive 20/95/EC Applications Mobile phones, PDA, portable music players, digital cameras, digital camcorders and other applications requiring high reliability Micro-B interface connectors. Standard (Bottom mount) Drop-in (Mid-mount) Reverse (Top mount) USB 2.0 Hi-Speed (40 Mbps) Eye pattern measurement results: Measured with USB 2.0 cable 2.4 m long 200 mv/div TP2 500ps/div 200.7 1

All non-rohs ZX products Series Micro-USB have been discontinued, connectors or will be discontinued meeting soon. requirements Please check the products of USB status 2.0 on Standard the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. Specifications 1 A (per contact) or Voltage rating 30 V AC Ratings Current rating A (contacts No. 1 and 5) and 0.5 A (contacts No. 2, 3, and 4) Operating temperature range Storage temperature range -30 C to +5 C -30 C to +5 C Item Specification Conditions 1. Contact resistance 30 mø max. 100 ma 2. Withstanding voltage No flashover or insulation breakdown 100 V AC / 1 minute 3. Capacitance 2 pf max. Between adjacent contacts at 1,000 Hz (AC voltage) 4. Durability Contact resistance: Rise from initial value of 10 mø max. 10,000 cycles 5. Total insertion/removal force Insertion force: 35 N max., Removal force: N min. Mated with corresponding connector Materials Receptacles Plugs Part Material Finish Remarks Insulator LCP Micro-B: Black, Micro-AB: Gray UL94V-0 Contacts Copper alloy Selective gold plated --------------- Shell Stainless steel Tin alloy plating --------------- Part Material Finish Remarks Insulator Synthetic resin Micro-A: White, Micro-B: Black UL94V-0 Contacts Copper alloy Selective gold plated --------------- Lock spring Stainless steel --------------- --------------- Shell Stainless steel Nickel plated or unfinished --------------- Ordering information Receptacles ZX 62 RD - B - 5 P * 1 2 3 4 5 6 7 Plugs ZX 40 - B - 5 S * - UNIT 1 2 4 5 6 7 9 ZX 40 - B - SLDA 1 2 4 9 Product Styles Table Interface Receptacle Plug 1 Series name ZX 2 Termination style 10's: Right-angle PCB wire, SMT 20's: Straight, PCB wire 40's: Direct wire 60's: Right-angle, PCB wire 0's: Cradle SMT 3 Board mounting style Blank Standard (Bottom mount) (Receptacles) D Standard (Bottom mount) through hole R Reverse (Top mount) RD Reverse (Top mount) through hole M Drop-in (Mid-mount) 4 Mating side configuration A Micro-A B Micro-B AB Micro-AB 5 Number of contacts 5 6 Contact type P Receptacle- Male S Plug Female 7 Serial No. Shell termination style Blank SMT Receptacles Through hole (solder tab length: 0.mm) 9 Components-plugs UNIT (Insulator/contact/lock) SLD* Cover (Note 1) Note 1: Classifiers such as A, B, and C are entered for *. Micro-A Micro-B Micro-AB 2

All non-rohs products have been discontinued, or will be discontinued soon. Please check the products ZX status Series Micro-USB on the Hirose website RoHS connectors search at www.hirose-connectors.com, meeting requirements or contact of your USB Hirose 2.0 sales Standard representative. Configurations Mating side configuration Application Mounting, termination styles/wire attachment Part Number 3D Image Page SMT ZX62-B-5PA 4 Micro-B Standard SMT + DIP ZX62D-B-5P 4 Reverse SMT ZX62R-B-5P 5 Receptacles Micro-AB Drop-in SMT ZX62M-B-5P 5 Standard SMT SMT + DIP ZX62-AB-5PA 6 ZX62D-AB-5P 6 SMT ZX62R-AB-5P 7 Reverse SMT + DIP ZX62RD-AB-5P 7 Data Direct wire soldering PCB wire soldering (right angle, through hole) (insulator/contacts/lock) :ZX40-B-5S-UNIT(12) Cover-top :ZX40-B-SLDA Cover-bottom :ZX40-SLDB (insulator/contacts/lock) :ZX10-B-5S-UNIT(12) Cover-top :ZX10-B-SLDA Cover-bottom :ZX10-SLDB(3.3) 9 and 10 11 and 12 P l u g s Micro-B Earphone Charging PCB wire soldering (straight, through hole) PCB wire soldering (SMT) (insulator/contacts/lock) :ZX20-B-5S-UNIT(12) Cover :ZX20-B-SLDC (insulator/contacts/lock) :ZX64-B-5S-UNIT(14) Cover-top :ZX64-B-SLDA Cover- bottom :ZX64-SLDB 13 14 and 15 Charging Earphone PCB wire soldering (SMT) (insulator/contacts/lock) :ZX64-B-5S-UNIT(14) Cover :ZX64-B-SLDC 14 and 16 Micro-A Data Direct wire soldering (insulator/contacts/lock) :ZX40-A-5S-UNIT Cover-top :ZX40-A-SLDA Cover- bottom :ZX40-SLDB 17 and 1 Cradles Micro-B Cradle SMT + DIP ZX0-B-5S 19 With lock ZX0-B-5SA 19 Without lock Note: 1. Part numbers in the Plugs section of the above table list the (insulator/contacts/locks) and the corresponding Shields/Covers. Note: 2. Optional Printed Circuit boards for the Plugs are shown for reference only. Not supplied with applicable connectors. Note: 3. The color of the insulators body in the (insulator/contacts/lock) shown in the 3D Image column above is blue for clarity. Refer to the Materials (Page 2) for correct colors. 3

All non-rohs ZX products Series Micro-USB have been discontinued, connectors or will be discontinued meeting soon. requirements Please check the products of USB status 2.0 on Standard the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. Receptacles Micro B - Standard (Bottom mount), Shell SMT ZX62-B-5PA 242-0033- 2,000 pieces per reel YES BRecommended PCB mounting pattern NO CONDUCTIVE TRACES.3 4.1 0.4 5 1.9 1.6 0.5 4.3 6.2 9. 1.45 3.35 PCB EDGE 7.5 2.5 7.9 2.15 0.6 5 2. Micro B - Standard (Bottom mount), Shell through hole ZX62D-B-5P 242-0034-0 2,000 pieces per reel YES BRecommended PCB mounting pattern 2.9 R0.525(LAND) 1.25(LAND) 0.5(TH) 0.2 R0.3(TH) 0.1 R0.325(TH) NO CONDUCTIVE TRACES 4.5 0.65 1.05(LAND) 0.4 0.65(TH) 5 R0.5(LAND) 2.75 3.35 7.5 0.6 5 R0.325(TH) 0.5(TH) 4.1 5.2 7.2 9.4 0.5 1.5(TH) 1.9 PCB EDGE 4.5 7.2 2.5 0. 2.15 2.9 2. 4

All non-rohs products have been discontinued, or will be discontinued soon. Please check the products ZX status Series Micro-USB on the Hirose website RoHS connectors search at www.hirose-connectors.com, meeting requirements or contact of your USB Hirose 2.0 sales Standard representative. Receptacles Micro B - Reverse (Top mount) Shell SMT ZX62R-B-5P 242-002- 2,000 pieces per reel YES BRecommended PCB mounting pattern 3.35 2.3 4.1 0.4 5 0.43 11.5 7.5 R0.4 3.6 4.3 1.9 1.9 0.5 2.9 3.9 5.6 6.6 9. 1.45 NO CONDUCTIVE TRACES 7.5. 2.5 0.6 5 2.15 Micro B - Drop-in (Mid-mount), Shell SMT ZX62M-B-5P 242-0024-7 2,000 pieces per reel YES BRecommended PCB mounting pattern 7.15 5.15 1.05 1.5 4.7 2 C0.3 1.4 2.4 7.5 0.6 1.9 4.3 5 5.3 1.25 1.23 2.74 0.4 6.9 7.. 12 2.4 PCB EDGE 4.7 0.25 4. 5

All non-rohs ZX products Series Micro-USB have been discontinued, connectors or will be discontinued meeting soon. requirements Please check the products of USB status 2.0 on Standard the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. Receptacles Micro AB - Standard (Bottom mount), Shell SMT ZX62-AB-5PA 242-0045-7 2,000 pieces per reel YES BRecommended PCB mounting pattern.3 4.1 0.4 5 1.6 3.35 7.5 0.6 5 0.5 4.3 6.2 9. 1.45 1.9 PCB EDGE NO CONDUCTIVE TRACES 2.5. 2.15 2. Micro AB - Standard (Bottom mount), Shell through hole ZX62D-AB-5P 242-0027-5 2,000 pieces per reel YES BRecommended PCB mounting pattern 3.125 1.25(LAND) 0.5(TH) R0.45(LAND) R0.25(TH) R0.3(TH) R0.5(LAND) PCB EDGE 0.325 0.5 0.4 4.45 0.5 4.1 5.2 7.35(TH) 9(TH) 9.4 1.05(LAND) 0.65(TH) NO CONDUCTIVE TRACES 5 1.5 1.7 1.5(TH) 1.9 3.475 25 7.5 4.45.35 2.5 0.6 0.6 5 2.025 3.125 2. 6

All non-rohs products have been discontinued, or will be discontinued soon. Please check the products ZX status Series Micro-USB on the Hirose website RoHS connectors search at www.hirose-connectors.com, meeting requirements or contact of your USB Hirose 2.0 sales Standard representative. Receptacles Micro AB - Reverse (Top mount), Shell SMT ZX62R-AB-5P 242-0035-3 2,000 pieces per reel YES BRecommended PCB mounting pattern NO CONDUCTIVE TRACES 5.3 4.1 0.4 1.6 1.9 3.35 0.5 2.9 0.5 4.75 6.6 9. 4-R0.4 0.43 1.45 PCB EDGE Micro AB - Reverse (Top mount), Shell through hole 7.5. 2.5 0.6 2.15 5 ZX62RD-AB-5P 242-0025-0 2,000 pieces per reel YES BRecommended PCB mounting pattern R0.25(TH) 1.25(LAND) 0.5(TH) 9.4 9(TH) 7.35(TH) 6.6 4.45 0.4 R0.45(LAND) R0.2MAX 1.05(LAND) 0.65(TH) 5 1.5 1.7 3.125 0.555 3.475 7.5 0.6 5 R0.3(TH) (0.325) (0.5) NO CONDUCTIVE TRACES 2.9 4.75 0.5 1.5(TH) 1.9 25 R0.5(LAND) 4.45.35 2.5 0.6 2.025 3.125 PCB EDGE 7

All non-rohs ZX products Series Micro-USB have been discontinued, connectors or will be discontinued meeting soon. requirements Please check the products of USB status 2.0 on Standard the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. Plugs assembled (not-terminated, without overmold) ZX40 - Direct wire soldering Components ZX40-*-SLDA Cover-top ZX40-*-5S-UNIT (insulator/contacts/lock) *No PCB required ZX40-SLDB Cover-bottom ZX10 - PCB wire soldering ZX10-B-SLDA Cover-top ZX10-B-5S-UNIT (insulator/contacts/lock) *SMT PCB termination ZX10-SLDB Cover-bottom ZX20 - PCB wire soldering ZX20-*-SLDC Cover ZX20-*-5S-UNIT (insulator/contacts/lock) *Straight through hole PCB termination ZX64 - PCB wire soldering ZX64-*-SLDA Cover-top ZX64-*-5S-UNIT (insulator/contacts/lock) *Right angle through hole PCB termination ZX64-SLDB Cover-bottom

All non-rohs products have been discontinued, or will be discontinued soon. Please check the products ZX status Series Micro-USB on the Hirose website RoHS connectors search at www.hirose-connectors.com, meeting requirements or contact of your USB Hirose 2.0 sales Standard representative. Plugs Micro B - (insulator/contacts/lock) Direct wire soldering Part Number CL No. RoHS ZX40-B-5S-UNIT(12) 242-0002-4-12 YES Contact HRS for Cable Termination Procedure Manual. Micro B - Component, Cover-top - Direct wire soldering ZX40-B-SLDA 242-0003-7 4,000 pieces per reel YES 2 14.1 7.9 4.2 9

All non-rohs ZX products Series Micro-USB have been discontinued, connectors or will be discontinued meeting soon. requirements Please check the products of USB status 2.0 on Standard the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. Plugs Micro A, Micro B - Component, Cover-bottom - Direct wire soldering 16.2 16.2 ZX40-SLDB ZX40-SLDB(3.3) Part Number CL No. Packaging Cable dia. RoHS ZX40-SLDB 242-0004-0 Ø3. 4,000 pieces per reel YES ZX40-SLDB(3.3) 242-0023-4 Ø3.3 Assembled 2.6 4.75 10

All non-rohs products have been discontinued, or will be discontinued soon. Please check the products ZX status Series Micro-USB on the Hirose website RoHS connectors search at www.hirose-connectors.com, meeting requirements or contact of your USB Hirose 2.0 sales Standard representative. Plugs Micro B - (insulator/contacts/lock) - Right angle through hole PCB wire soldering (non-direct) Part Number CL No. Packaging RoHS ZX10-B-5S-UNIT(12) 242-0030-0-12 1,500 pieces per reel YES Contact HRS for Cable Termination Procedure Manual. PCB mounting pattern *PCB required (not supplied) Max. thickness: 0.6mm 0.15 A 12.05 1 A A-A 0.79 0.3 0.45 0.95 1.25 X 1.25 0.95 0.45 0.15 X 7.3 3.05 1.55 7.6 4 Micro B - Component, Cover-top - Right angle through hole Part Number ZX10-B-SLDA CL No. Packaging RoHS 242-0031-2 4,500 pieces per reel YES 23.4 7.7 5-Ø0.9(LAND) 5 3.35 0.95 5-Ø0.5(TH) 11

All non-rohs ZX products Series Micro-USB have been discontinued, connectors or will be discontinued meeting soon. requirements Please check the products of USB status 2.0 on Standard the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. Plugs Micro B - Component, Cover-bottom Right angle through hole Part Number ZX10-SLDB(3.3) CL No. Packaging RoHS 242-0032-5 4,500 pieces per reel YES 16.95 7.7 Assembled 23.4.1 4.4 12

All non-rohs products have been discontinued, or will be discontinued soon. Please check the products ZX status Series Micro-USB on the Hirose website RoHS connectors search at www.hirose-connectors.com, meeting requirements or contact of your USB Hirose 2.0 sales Standard representative. Plugs Micro B - (insulator/contacts/lock) - Straight through hole PCB wire soldering (non-direct) Part Number CL No. RoHS ZX20-B-5S-UNIT(12) 242-0012--12 YES Contact HRS for Cable Termination Procedure Manual. 5-0.15 1 1.4 0.6(Through hole) PCB mounting pattern *PCB required (not supplied) Max. thickness: 0.6mm 5-Ø1.1(Land) 5-Ø0.7(Through hole) 1(Land) 12.2 1.2(Through hole) R0.3(Through hole).2 10.25 1.55 Micro B - Component, Cover - Straight, through hole R0.5(Land) 1.6(Land) 4.2 3.975 7.9 0.35 1.55 ZX20-B-SLDC 242-0022-1 4,000 pieces per reel YES.2 2-0.2 1.1 0.6 12.1 Assembled 5-0.15.2 2-0.2 12.2 1 1.4.4 (insulator/contacts/lock) 4.4 Cover 0.35 1.55 0.6 13

All non-rohs ZX products Series Micro-USB have been discontinued, connectors or will be discontinued meeting soon. requirements Please check the products of USB status 2.0 on Standard the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. Plugs Micro B - (insulator/contacts/lock) - Right angle SMT Part Number CL No. RoHS ZX64-B-5S-UNIT(14) 242-0009-0-14 YES Contact HRS for Cable Termination Procedure Manual. 5-0.15 Micro B - Component, Cover-top Right angle SMT ZX64-B-SLDA 242-0013-0 4,000 pieces per reel YES 24.7 16.1 PCB mounting pattern *PCB required (not supplied) Max. thickness: 1.0mm 6 0.35 6. 0.5 1.1 1.5 3.7 7.9 14

All non-rohs products have been discontinued, or will be discontinued soon. Please check the products ZX status Series Micro-USB on the Hirose website RoHS connectors search at www.hirose-connectors.com, meeting requirements or contact of your USB Hirose 2.0 sales Standard representative. Plugs Micro B - Component, Cover-bottom - Right angle SMT ZX64-SLDB 242-0049- 4,000 pieces per reel YES Assembled 4.1 24.7.4 (insulator/contacts/lock) Cover-top 1.25 Cover-bottom 15

All non-rohs ZX products Series Micro-USB have been discontinued, connectors or will be discontinued meeting soon. requirements Please check the products of USB status 2.0 on Standard the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. Plugs Micro B - Component, Shell/cover Right angle SMT ZX64-B-SLDC 242-001-4 4,000 pieces per reel YES Shell/cover, without cable clamp This shell/cover does not require ZX64-SLDB. 16.1 Assembled 16.1.4 (insulator/contacts/lock) Cover-top 4.1 Cover-bottom 16

All non-rohs products have been discontinued, or will be discontinued soon. Please check the products ZX status Series Micro-USB on the Hirose website RoHS connectors search at www.hirose-connectors.com, meeting requirements or contact of your USB Hirose 2.0 sales Standard representative. Plugs Micro A - (insulator/contacts/lock) - Direct wire soldering Part Number CL No. RoHS ZX40-A-5S-UNIT 242-0010-2 YES Contact HRS for Cable Termination Procedure Manual. Micro A - Component, Cover-top - Direct wire soldering ZX40-A-SLDA 242-0011-5 4,000 pieces per reel YES 2 12.4 Contacts 7.9 4.2 Insulator body (color grey) 17

All non-rohs ZX products Series Micro-USB have been discontinued, connectors or will be discontinued meeting soon. requirements Please check the products of USB status 2.0 on Standard the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. Plugs Micro A, Micro B - Component, Cover-bottom - Direct wire soldering Part Number CL No. Packaging Cable dia. RoHS ZX40-SLDB 242-0004-0 Ø3. 4,000 pieces per reel YES ZX40-SLDB(3.3) 242-0023-4 Ø3.3 Assembled 4.75 2.6 (insulator/contacts/lock) Cover-top 16.2 16.2 ZX40-SLDB ZX40-SLDB(3.3) Cover-bottom 1

All non-rohs products have been discontinued, or will be discontinued soon. Please check the products ZX status Series Micro-USB on the Hirose website RoHS connectors search at www.hirose-connectors.com, meeting requirements or contact of your USB Hirose 2.0 sales Standard representative. Plug-Vertical, cradle mount, Shell through hole Micro B, with lock 6.65 2-0.2.55 2.7 2.42 5-0.15 1 6 3.52 2.32 0.37 Micro B, without lock 6.65 2-0.2.55 2.7 2.42 5-0.15 ZX0-B-5SA 242-0019-7 100 pieces YES 0.37 2-Ø2.2(Hole) -R0.25 1.1(Land) 0.5(Through hole) 2.9 3.15 3.15 3.15 R1.6 16.55 20.55 0.7 2.5 7.1 13 1.15 ZX0-B-5S 242-0017-1 100 pieces YES 6 (Through hole) 1.9(Land) 1 3.52 2.32 0.37 R1.6 16.55 20.55 0.7 2.5 7.1 13 1.15 BPCB mounting pattern 2.2 -R0.55 0.4 Contact 6.65 16.55 0.5(Through hole) 1.1(Land) Contact 1.6(Through hole) 2.2(Land) 6 19

All non-rohs ZX products Series Micro-USB have been discontinued, connectors or will be discontinued meeting soon. requirements Please check the products of USB status 2.0 on Standard the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. BPackaging Specifications Embossed carrier tape dimensions Reel Dimensions B 1.75 4 0.5 2 12 Unreeling direction Ø1.5 Ø30 Ø13 Unreeling direction C D A Part Number A dimension B dimension ZX62-B-5PA 24 11.5 ZX62-AB-5PA 24 11.5 ZX62M-B-5P 24 11.5 Other 16 7.5 Part Number C dimension D dimension ZX62-B-5PA 30.4 24.4 ZX62-AB-5PA 30.4 24.4 ZX62M-B-5P 30.4 24.4 Other 22.4 16.4 Note : Tape and reel packaging (2,000 pieces/reel). Order by number of reels. BRecommended Temperature Profile - Receptacles Using lead-free solder paste (ç) 250 250ç 200 150 10ç 150ç 220çmin. HRS test condition Solder composition :Paste,96.5%Sn/3.0%Ag/0.5%Cu Test board :Glass epoxy 35mm 35mm 0.mm thick The temperature profile is based on the left conditions. In individual applications the actual temperature may vary, depending on solder paste type, volume/thickness and board size/thickness. Contact your solder paste and equipment manufacturer for specific recommendations. 100 50 120 S 70 S (S) Note 1: Up to 2 cycles of Reflow soldering are possible under the same conditions, provided that there is a return to normal temperature between the first and second cycle. Note 2: The temperature profile indicates the board surface temperature at the point of contacts with the connector terminals. BPrecautions 1. Exercise care when handling the connectors. Do not subject them to excessive external forces when mating/un-mating. 2. Mate and un-mate as intended, holding by the overmolded body, in the correct direction. Do not un-mate by pulling on the cable. 3. Some tooling marks may be visible on the surfaces of receptacle (shell/cover). No form/fit or function is affected. 4. Appearance of the surface finishes on the receptacles may vary between production runs. No affect on form, fit or function. 5-23,OSAKI 5-CHOME,SHINAGAWA-KU,TOKYO 141-57,JAPAN PHONE: 1-3-3491-9741, FAX: 1-3-3493-2933 http://www.hirose.com http://www.hirose-connectors.com 20 The contents of this catalog are current as of date of 07/200. Contents are subject to change without notice for the purpose of improvements.