2SCR53P NPN.0A 50 Middle Power Transistor Datasheet Outline Parameter alue MPT3 CEO 50 I C.0A Base Collector Emitter Features ) Suitable for Middle Power Driver 2) Complementary PNP Types : 2SAR53P 3) Low CE(sat) CE(sat) =0.35(Max.) (I C /I B =500mA/25mA) 4) Lead Free/RoHS Compliant. 2SCR53P (SC-62) <SOT-89> Inner circuit Collector Emitter Base Applications Motor driver, LED driver Power supply Packaging specifications Part No. Package Package size (mm) Taping code Reel size (mm) Tape width (mm) Basic ordering unit (pcs) Marking 2SCR53P MPT3 4540 T0 80 2,000 NC Absolute maximum ratings (Ta = 25 C) Parameter Symbol alues Unit Collector-base voltage Collector-emitter voltage Emitter-base voltage CBO CEO EBO 50 50 6 Collector current DC I C.0 A Pulsed 2.0 A Power dissipation Junction temperature Range of storage temperature * Pw=ms, single pulse Each terminal mounted on a reference land *3 Mounted on a ceramic board (40 40 0.7mm) I CP * P D P D *3 0.5 W 2.0 W T j 50 C T stg -55 to +50 C /6 203.05 - Rev.B
2SCR53P Electrical characteristics(ta = 25 C) Collector-emitter breakdown voltage Collector-base breakdown voltage Emitter-base breakdown voltage Parameter Symbol Conditions Min. Typ. Max. B CEO I C = ma 50 - B CBO I C = 0mA 50 - - B EBO I E = 0mA 6 - Unit - - Collector cut-off current I CBO CB = 50 - - ma Emitter cut-off current I EBO EB = 4 - - ma Collector-emitter saturation voltage CE(sat) * I C = 500mA, I B = 25mA - 0.3 0.35 DC current gain h FE CE = 2, I C = 50mA 80-450 - Transition frequency f T CE =, I E = -200mA f=0mh Z - 360 - MHz Output capacitance C ob CB =, I E = 0A, f = MHz - 7 - pf Turn-on time t on Storage time t stg Fall time * Pulsed See switching time test circuit t f I C =0.5A I B =50mA I B2 = -50mA CC - 40 - ns - 4 - ns - 75 - ns Switching time test circuit 2/6 203.05 - Rev.B
2SCR53P Electrical characteristic curves(ta = 25 C) Fig. Ground Emitter Propagation Characteristics Fig.2 Typical Output Characteristics 000 00 0 CE = 2-40ºC 0 0.5.5 COLLECTOR CURRENT : I C [A] 0.50 0.45 0.40 0.35 0.30 0.25 0.20 0.5 0. 0.05 0.00 5.0mA 4.0mA 3.0mA 2.5mA 2.0mA.5mA.0mA I B = 0.5mA 0 0.5.5 2 BASE TO EMITTER OLTAGE : BE [] COLECTOR TO EMITTE OLTAGE : CE [] Fig.3 DC Current Gain vs. Collector Current(I) Fig.4 DC current gain vs. output current (II) 00 CE = 2 00 DC CURRENT GAIN : h FE 0-40ºC DC CURRENT GAIN : h FE 0 CE = 5 2 0 00 000 0 00 000 3/6 203.05 - Rev.B
2SCR53P Electrical characteristic curves(ta = 25 C) COLLECTOR-EMITTER SATURATION OLTAGE : CE(sat) [] Fig.5 Collector-Emitter Saturation oltage vs. Collector Current (I) 0. 0.0 0.00 I C / I B = 20-40ºC 0 00 000 COLLECTOR-EMITTER SATURATION OLTAGE : CE(sat) [] Fig.6 Collector-Emitter Saturation oltage vs. Collector Current (II) 0. 0.0 0.00 I C / I B = 50 20 0 00 000 BASE-EMITTER SATURATION OLTAGE : BE(sat) [] Fig.7 Base-Emitter Saturation oltage vs. Collector Current 0. Ta= -40ºC I C / I B = 20 Pulsed 0 00 000 TRANSITION FREQUENCY : f T [MHz] Fig.8 Gain Bandwidth Product vs. Emitter Current 00 0 CE = - -0-00 EMITTER CURRENT : I E [ma] 4/6 203.05 - Rev.B
2SCR53P Electrical characteristic curves(ta = 25 C) COLLECTOR OUTPUT CAPACITANCE : Cob [pf] EMITTER INPUT CAPACITANCE : Cib [pf] Fig.9 Emitter input capacitance vs. Emitter-Base oltage Collector output capacitance vs. Collector-Base oltage 00 0 C ib f=mhz I E =0A I C =0A C ob 0. 0 COLLECTOR - BASE OLTAGE : CB [] EMITTER - BASE OLTAGE : EB [] COLLECTOR CURRENT : I C [A] Fig. Safe Operating Area 0. Single non repetitive pulse DC (Mounted on a ceramic board) DC (Mounted on a reference land) ms ms 0ms 0.0 0. 0 COLLECTOR TO EMITTER OLTAGE : CE [] 5/6 203.05 - Rev.B
2SCR53P Dimensions (Unit : mm) MPT3 D A b HE L E E Lp x S A b e b2 c b4 e β y S A S l b3 e e b5 l2 l3 Pattern of terminal position areas [Not a recommended pattern of soldering pads] DIM MILIMETERS INCHES MIN MAX MIN MAX A.40.50 0.055 0.059 b 0.30 0.50 0.02 0.020 b.50.70 0.059 0.067 b2 0.40 0.60 0.06 0.024 c 0.35 0.50 0.04 0.020 D 4.40 4.70 0.73 0.85 E 2.40 2.70 0.094 0.6 e e.50 0.059 HE 3.70 4.30 0.46 0.69 LE 0.80.20 0.03 0.047 Lp.0.4 0.040 0.056 x - 0.5-0.006 y - 0. - 0.004 MILIMETERS INCHES DIM MIN MAX MIN MAX b3-0.65-0.026 b4 -.70-0.067 b5-0.75-0.030 l -.7-0.067 l2-0.58-0.023 l3-3.72-0.46 β 45 45 Dimension in mm / inches 3.00 0.8 6/6 203.05 - Rev.B
Notice Notes ) 2) 3) 4) 5) 6) 7) 8) 9) ) ) 2) 3) The information contained herein is subject to change without notice. Before you use our Products, please contact our sales representative and verify the latest specifications : Although ROHM is continuously working to improve product reliability and quality, semiconductors can break down and malfunction due to various factors. Therefore, in order to prevent personal injury or fire arising from failure, please take safety measures such as complying with the derating characteristics, implementing redundant and fire prevention designs, and utilizing backups and fail-safe procedures. ROHM shall have no responsibility for any damages arising out of the use of our Poducts beyond the rating specified by ROHM. Examples of application circuits, circuit constants and any other information contained herein are provided only to illustrate the standard usage and operations of the Products. The peripheral conditions must be taken into account when designing circuits for mass production. The technical information specified herein is intended only to show the typical functions of and examples of application circuits for the Products. ROHM does not grant you, explicitly or implicitly, any license to use or exercise intellectual property or other rights held by ROHM or any other parties. ROHM shall have no responsibility whatsoever for any dispute arising out of the use of such technical information. The Products are intended for use in general electronic equipment (i.e. A/OA devices, communication, consumer systems, gaming/entertainment sets) as well as the applications indicated in this document. The Products specified in this document are not designed to be radiation tolerant. For use of our Products in applications requiring a high degree of reliability (as exemplified below), please contact and consult with a ROHM representative : transportation equipment (i.e. cars, ships, trains), primary communication equipment, traffic lights, fire/crime prevention, safety equipment, medical systems, servers, solar cells, and power transmission systems. Do not use our Products in applications requiring extremely high reliability, such as aerospace equipment, nuclear power control systems, and submarine repeaters. ROHM shall have no responsibility for any damages or injury arising from non-compliance with the recommended usage conditions and specifications contained herein. ROHM has used reasonable care to ensur the accuracy of the information contained in this document. However, ROHM does not warrants that such information is error-free, and ROHM shall have no responsibility for any damages arising from any inaccuracy or misprint of such information. Please use the Products in accordance with any applicable environmental laws and regulations, such as the RoHS Directive. For more details, including RoHS compatibility, please contact a ROHM sales office. ROHM shall have no responsibility for any damages or losses resulting non-compliance with any applicable laws or regulations. When providing our Products and technologies contained in this document to other countries, you must abide by the procedures and provisions stipulated in all applicable export laws and regulations, including without limitation the US Export Administration Regulations and the Foreign Exchange and Foreign Trade Act. 4) This document, in part or in whole, may not be reprinted or reproduced without prior consent of ROHM. Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact us. ROHM Customer Support System http:///contact/ R2A