Bulletin PD-0840 rev. B 04/06 9TQ05PbF SCHOTTKY ECTIFIE 9 Amp I F(A) = 9Amp = 5 Major atings and Characteristics Characteristics alues Units I F(A) ectangular 9 A waveform M 5 I FSM @ tp = 5 μs sine 700 A F @ 9 Apk, T = 75 C 0.3 range - 55 to 5 C Description/ Features The 9TQ05PbF Schottky rectifier has been optimized for ultra low forward voltage drop specifically for the O-ing of parallel power supplies. The proprietary barrier technology allows for reliable operation up to 5 C junction temperature. Typical applications are in parallel switching power supplies, converters, reverse battery protection, and redundant power subsystems. 5 C operation ( < 5) Optimized for O-ing applications Ultra low forward voltage drop High frequency operation Guard ring for enhanced ruggedness and long term reliability High purity, high temperature epoxy encapsulation for enhanced mechanical strength and moisture resistance Lead-Free ("PbF" suffix) Case Styles 9TQ05PbF Base Cathode 3 Cathode Anode TO-0AC
9TQ05PbF Bulletin PD-0840 rev. B 04/06 oltage atings WM Part number Max. DC everse oltage () Max. Working Peak everse oltage () 9TQ05PbF 5 Absolute Maximum atings Parameters 9TQ Units Conditions I F(A) Max. Average Forward Current 9 A 50% duty cycle @ T C = 80 C, rectangular wave form * See Fig. 5 I FSM Max. Peak One Cycle Non-epetitive 700 5μs Sine or 3μs ect. pulse Following any rated A load condition and Surge Current * See Fig. 7 330 0ms Sine or 6ms ect. pulse with rated M E AS Non-epetitive Avalanche Energy 6.75 m applied = 5 C, I AS =.50 Amps, L = 6 mh I A epetitive Avalanche Current.50 A Current decaying linearly to zero in μsec Frequency limited by max. A = 3 x typical Electrical Specifications Parameters 9TQ Units Conditions FM 0.3 I M Max. Forward oltage Drop Max. everse Leakage Current () () @ 9A 0.5 0.36 ma = 5 C @ 9A 0.43 * See Fig. * See Fig. @ 38A 5 0.46 ma = 00 C @ 38A = 5 C = 75 C = rated 465 ma = 00 C, = 85 ma = 00 C, = 5 C T Max. unction Capacitance 000 pf = 5 DC (test signal range 00Khz to Mhz) 5 C L S Typical Series Inductance 8.0 nh Measured lead to lead 5mm from package body dv/dt Max. oltage ate of Change 0000 / μs (ated ) Thermal-Mechanical Specifications Parameters 9TQ Units Conditions () Pulse Width < 300μs, Duty Cycle < % Max. unction Temperature ange -55 to 5 C T stg Max. Storage Temperature ange -55 to 50 C thc Max. Thermal esistance unction.50 C/W DC operation * See Fig. 4 to Case thcs Typical Thermal esistance, Case to 0.50 C/W Mounting surface, smooth and greased Heatsink wt Approximate Weight (0.07) g (oz.) T Mounting Torque Min. 6 (5) Kg-cm Max. (0) (Ibf-in) Marking Device 9TQ05
9TQ05PbF Bulletin PD-0840 rev. B 04/06 000 000 T = 00 C Instantaneous Forward Current - I F (A) 00 0 T = 00 C T = 75 C T = 5 C everse Current - I (ma) unction Capacitance - C (pf) T 00 0 0000 75 C 50 C 5 C. 0 5 0 5 000 everse oltage - () Fig. - Typical alues of everse Current s. everse oltage T = 5 C. 0..4.6.8..4 Forward oltage Drop - () FM Fig. - Maximum Forward oltage Drop Characteristics 0 00 0 5 0 5 0 5 30 everse oltage - () Fig. 3 - Typical unction Capacitance s. everse oltage Thermal Impedance - Z thc ( C/W). D = 0.50 D = 0.33 D = 0.5 D = 0.7 D = 0.08 t t Notes:.0. Duty factor D= t / t Single Pulse (Thermal esistance). Peak T = P x Z + T DM thc C.00.0000.000.00.0. 0 00 P DM t, ectangular Pulse Duration (Seconds) Fig. 4 - Maximum Thermal Impedance Z thc Characteristics 3
9TQ05PbF Bulletin PD-0840 rev. B 04/06 Allowable Case Temperature - ( C) 05 00 95 90 85 9TQ05 thc (DC) =.50 C/W DC Average Power Loss - (Watts) 0 8 6 MS Limit 4 D= 0.08 D= 0.7 D= 0.5 D= 0.33 D= 0.50 DC 80 0 5 0 5 0 5 30 0 0 4 8 6 0 4 8 Average Forward Current - I (A) F(A) Fig. 5 - Maximum Allowable Case Temperature s. Average Forward Current Average Forward Current - I (A) F(A) Fig. 6 - Forward Power Loss Characteristics 000 Non-epetitive Surge Current - I (A) FSM At Any ated Load Condition And With ated Applied Following Surge M 00 0 00 000 0000 Square Wave Pulse Duration - t p (microsec) Fig. 7 - Maximum Non-epetitive Surge Current L DUT IFP460 HIG H-SPEED SWITCH g = 5 ohm FEE-WHEEL DIODE + d = 5 olt CUENT MONITO 40HFL40S0 Fig. 8 - Unclamped Inductive Test Circuit 4
9TQ05PbF Bulletin PD-0840 rev. B 04/06 Outline Table Conform to EDEC outline TO-0AC Part Marking Information IXC Assembly Line - SubCon Assembly Line EXAMPLE: THIS IS A 9TQ05 LOT CODE 789 ASSEMBLED ON WW 9, 00 IN THE ASSEMBLY LINE "C" INTENATIONAL ECTIFIE LOGO ASSEMBLY LOT CODE PAT NUMBE DATE CODE P = LEAD-FEE YEA = 00 WEEK 9 LINE C IMX Assembly Line EXAMPLE: THIS IS A 9TQ05 LOT CODE 789 ASSEMBLED ON WW 9, 00 IN THE ASSEMBLY LINE "C" INTENATIONAL ECTIFIE LOGO ASSEMBLY LOT CODE PAT NUMBE DATE CODE YEA = 00 WEEK 9 P = LEAD-FEE 5
9TQ05PbF Bulletin PD-0840 rev. B 04/06 Ordering Information Table Device Code 9 T Q 05 PbF 3 4 5 - Current ating (9 = 9A) - Package T = TO-0 3 - Schottky "Q" Series 4 - oltage ating (05 = 5) 5 - none = Standard Production PbF = Lead-Free Tube Standard Pack Quantity : 50 pieces Data and specifications subject to change without notice. This product has been designed and qualified for Industrial Level and Lead-Free. Qualification Standards can be found on I's Web site. I WOLD HEADQUATES: 33 Kansas St., El Segundo, California 9045, USA Tel: (30) 5-705 TAC Fax: (30) 5-7309 isit us at for sales contact information. 04/06 6