BROADBAND CATALOGUE. Cu 1.13 PE 4.8 Cu (tape) + Cu (braid) 6,1. Cu 1.13 PE 4.8 Cu (tape) + Cu (braid) * 6,1. PVC white 6.8. PVC white 6.

Transcription

1 COAXIAL CABLES Indoor Distribution Cables MODEL CCH-7 CCI-74 CCI-7 CCSB7 CCIB7 CCI-79 CCI-90 CCS-90 CCIB90 REF Inner conductor Dielectric Outer conductor Outer sheath Attenuation/00m 47 MHz 00 MHz 230 MHz 470 MHz 862 MHz 90 MHz 70 MHz 20 MHz (tape) + (braid) white polyolefin (LSOH) ** (tape + (braid) PVC black 6. All the cables are manufactured using the Physical Process. Advantages: high mechanical strength, optimum electrical isolation and good stability of characteristics over time. *Braid is highly thick (coverage factor: 70%). **LSOH: Low Smoke Zero Halogen. Outer sheath of the CCH-7 does not contain halogens. It is flame retardant (EN/IEC ), the density of the smoke produced when the cable is burnt is very low (EN/IEC ) and the fumes are nontoxic (IEC ). (tape) + (braid) (tape) + (braid) * (tape) + (braid) Characteristics impedance Ω 7 ±3 Supply unit reel 20 m reel 20 m.0 6, * reel 20 m Preparing the cable CCI-7 to fit the CTF-2 connector CCI-7 inner conductor 8 dielectric outer conductor CFR

2 COAXIAL CABLES CATV Trunk&Feeder Cables MODEL CCT-7 CCT-2 CCTB2 CCT-60 REF Inner conductor (copper) / diameter Dielectric (Foam polythene) / diameter 7. 3 Outer conductor / diameter Al + Al / 6.3 Al + / 7.8 Al (tube) / Characteristics impedance Ω 7 ±3 Outer sheath (black polythene) / diameter Max Attenuation at 20 C DC resistance of: - inner conductor - outer conductor f = 00 MHz 00 MHz 600 MHz 70 MHz 862 MHz 90 MHz 70 MHz 20 MHz Ω/00m.72.4 Velocity ratio of propagation % Nominal capacitance pf/m 0 Minimum bending radius cm Pulling tension dan Weigth kg/00m Supply uit (6x) reel 00m reel 00m reel 200m Preparing the cable CCT-2 to fit the CTP-2 connector 0 0 () CCT-2 CTP-2 24

3 CABLE CONNECTORS Connectors for Indoor Distribution Cables CFR-680 CTF F CONECTORS Screw-on plug. Use cable: CCS, CCH, CCI, CCIB, CCT-7. Crimp plug. Use cable: CCS, CCH, CCI, CCIB, CCT-7. UCF-70 TOOL Crimp pliers for CTF-90 connector FDH-2 FRH-08 ARF-00 CFD-00 FAR F ADAPTERS Joining connector: F female - F female. Joining connector: F male - F male. Fast-fit adapter, F male. 90 degree adapter: Fast-fit elbow F connector.. 90 degree adapter: F male - F female. CAD CHD IEC CONNECTORS Elbow plug. Elbow jack TBF-0 TIF-00 TIF CONNECTOR TY ADAPTERS F female - BNC male. IEC male - F female. IEC female - F mele Connectors for CATV Trunk & Feeder Cables CTF-2 CPF F CONNECTORS Crimp F plug. Material: nickeled brass. Use cable: CCT-2. F plug. Material: nickeled brass. Use cable: CCT-60. CMC-60 CTP-2 CLP-2 CLP Pin /8". Chromate coating aluminium. Use cable. CCT-2. Pin /8. Nickeled brass. Use cable: CCT-2. /8. Chromate coating aluminium. Use cable. CCT-60. Pin /8. Chromate coating aluminium. Use cable: CCT SAI-3 EHP-62 CMM ADAPTERS-DOUBLE F Double female. Nickeled brass. /8 Double female. Nickeled brass. /8 Double male. Nickeled brass. TCF-80 TTF ADAPTADERS F female - /8". Nickeled brass. /8 female - F male. Nickeled brass UCF-70 PLC-60 8 TOOLS Hex crimp tool for CTF-2 connector. for preparing the CCT-60 cable to fit pin /8 connectors. CTF Ω LOAD F type. For loading an F port. Idem a /8" port through the TCF-80 adapter. Nickeled brass

4 DATA TRANSMISSION CABLES UTP (unshielded twisted pair) Cables UTP cable, 4-pair, Cat E, 00 MHz. UTP cable, 4-pair, Cat 6, 20 MHz, halogen free. DESCRIPTION Number of pairs 4 CONDUCTOR Total number of conductors 8 Conductor material Solid bare copper Wire gauge 24 AWG 23 AWG Conductor diameter Ø 0. Ø 0.7 Elongation rate % Insulate material HD - Polyethylene Nominal insulate wall thickness INSULATE CABLING Insulate diameter Ø 0.88 ±0.0 Ø 0.96 ±0.0 Elogation rate 300 Pair : Blue & White/Blue Pair colour Pair 2: Orange & White/Orange Pair 3: Green & White/Green Pair 4: Brown & Whte/Brown Order of the pair see picture Cross filler Tape T x20 conductor insulation rip cord Sheath material PVC LSZH OUTER SHEATH Sheath colour Rip cord Min thickness White 200Dx conductor Nominal diameter Ø.20 ±0.30 Ø 6.20 ±0.30 insulation ELECTRICAL CHARACTERISTICS Max conductor DC resistance 20ºC Ω/00m Unbalance of pair DC resistance 20ºC % 2. Dielectric strength between pairs kv/min.0 Insulation resistance MΩ km 00 Capacitance nf/00m.6 Unbalance of capacitance pf/00m 330 Characteristics impedance Ω 00 ± Return loss 20.0 Max delay ns/00m 4.0 Max insertion loss MHZ 4 MHz 0 MHz 6 MHz MHz MHz MHZ 00 MHz 20 MHz Min Near End Cross Talk MHZ 4 MHz 0 MHz 6 MHz 20 MHz 3.2 MHz 62. MHZ 00 MHz 20 MHz separator tape rip cord OTHER CHARACTERISTICS Operating temperature -20º to +7ºC Min bend radius 8 x D Net weight 28 kg/km 40 kg/km Supply unit reel 000 ft 26

5 27