Type ± ± ± ± ± PC47EER42/42/20-Z ± ± ± ± ±
|
|
|
- Christopher Hutchinson
- 7 years ago
- Views:
Transcription
1 (7/44) EER CORES H ød A E H ød A E H B F Type 1 C B F Type 2 C H Part No. PC47EER25.5-Z PC95EER25.5-Z PC47EER28-Z PC95EER28-Z PC47EER28L-Z PC95EER28L-Z PC47EER35-Z PC95EER35-Z PC47EER4-Z PC95EER4-Z PC47EER42-Z U.S. Iam. cores, DIN standard FEER25.5A FEER28.5A FEER28.5B FEER35A FEER42 Type A B C ød E min. F H ±.5 9.3±.2 7.5±.2 7.5± ± ± ± ± ± ± ± ± ± ± ± ±.5 2.7± ± ± ± ± ± ± ± ± ± ± ± ± ±.3 6. PC47EER42/42/2-Z ± ± ± ± ± PC47EER49-Z 1 49.±.8 19.± ± ± ±.2 6. Part No. Effective parameter C1 (mm 1 ) Ae (mm 2 ) AL-value: 1kHz,.5mA, Ts loss: khz, 2mT, 25 C/8 C/12 C e (mm) Ve (mm 3 ) PC47EER25.5-Z 192±25% PC95EER25.5-Z 27±25% PC47EER28-Z 287±25% PC95EER28-Z 4±25% PC47EER28L-Z 252±25% PC95EER28L-Z 3±25% PC47EER35-Z 277±25% PC95EER35-Z 4±25% PC47EER4-Z 362±25% PC95EER4-Z 52±25% PC47EER42-Z ±25% PC47EER42/42/2-Z ±25% PC47EER49-Z ±25% Electrical characteristics AL-value (nh/n 2 ) Without air gap With air gap ±5% 2±7% 2±5% 4±7% 16±5% 315±7% 2±5% 4±7% 2±5% 4±7% 2±5% ±7% 2±5% ±7% 2±5% ±7% loss (W) max. khz, 2mT, Weight (g) C /.9/ /2.1/ /2.45/ /3.8/ /5.7/ / / e141.fm
2 (31/44) EER Series EER25.5 s( FEER 25.5A) 6.2±.2 9.3±.2 ø7.5± ±.5 7.5± factor C1 mm Effective magnetic path length e mm 48.2 Effective cross-sectional area Ae mm Effective core volume Ve mm Cross-sectional center pole area Acp mm Minimum cross-sectional center pole area Acp min. mm Cross-sectional winding area of core Acw mm Weight (approx.) g 11 PC47EER25.5-Z PC95EER25.5-Z : ø.35 2UEW Ts 192±25% (1kHz,.5mA) 29 min. (khz, 2mT) 192±25% (1kHz,.5mA) 27±25% loss (W) khz, 2mT.75 max.( C) 112W (khz) 1.1/.9/1.1(25 C/8 C/12 C) 96W (khz) PC47EER25.5 gapped core (Typical) PC47EER25.5 core (Typical) EER25.5 core (Typical) 3 Temperature: C NI=21135 AL NI=2761 AL AL= lg PC95EER25.5 gapped core (Typical) 3 Temperature: C NI=18523 AL NI=16876 AL PC95EER25.5 core (Typical) 4 AL=8.185 lg current is and away from its. 1 Measuring conditions : ø.35 2UEW Ts 3-1 / / e141.fm
3 (32/44) EER Series EER28 s( FEER 28.5A) ø9.9± ± factor C1 mm 1.78 Effective magnetic path length e mm 64. Effective cross-sectional area Ae mm Effective core volume Ve mm 3 52 Cross-sectional center pole area Acp mm Minimum cross-sectional center pole area Acp min. mm Cross-sectional winding area of core Acw mm Weight (approx.) g ± ± ± PC47EER28-Z PC95EER28-Z : ø.35 2UEW Ts 287±25% (1kHz,.5mA) 43 min. (khz, 2mT) 287±25% (1kHz,.5mA) 4±25% loss (W) khz, 2mT 1.72 max.( C) 233W (khz) 2.45/2.1/2.45(25 C/8 C/12 C) 223W (khz) PC47EER28 gapped core (Typical) PC47EER28 core (Typical) EER28 core (Typical) 3 Temperature: C NI=3622 AL NI=26734 AL AL=13.48 lg PC95EER28 gapped core (Typical) 3 Temperature: C NI=33532 AL NI=3341 AL PC95EER28 core (Typical) 4 AL=13.82 lg current is and away from its. 1 Measuring conditions : ø.35 2UEW Ts 3-1 / / e141.fm
4 (33/44) EER Series EER28L s( FEER 28.5B) ø9.9± ± factor C1 mm Effective magnetic path length e mm 75.5 Effective cross-sectional area Ae mm Effective core volume Ve mm 3 61 Cross-sectional center pole area Acp mm Minimum cross-sectional center pole area Acp min. mm Cross-sectional winding area of core Acw mm Weight (approx.) g ± ± ± PC47EER28L-Z PC95EER28L-Z : ø.35 2UEW Ts 252±25% (1kHz,.5mA) 366 min. (khz, 2mT) 252±25% (1kHz,.5mA) 3±25% loss (W) khz, 2mT 2.3 max.( C) 267W (khz) 2.9/2.45/2.9(25 C/8 C/12 C) 2W (khz) PC47EER28L gapped core (Typical) PC47EER28L core (Typical) EER28L core (Typical) 3 Temperature: C NI=28528 AL 1.85 NI=25474 AL AL= lg PC95EER28L gapped core (Typical) 3 Temperature: C NI=31563 AL NI=2822 AL PC95EER28L core (Typical) 4 AL=132.2 lg current is and away from its. 1 Measuring conditions : ø.35 2UEW Ts 3-1 / / e141.fm
5 (34/44) EER Series EER35 s( FEER 35A) 14.7±.3 2.7±.2 ø11.3± ± ± factor C1 mm Effective magnetic path length e mm 9.8 Effective cross-sectional area Ae mm 2 7 Effective core volume Ve mm Cross-sectional center pole area Acp mm 2 Minimum cross-sectional center pole area Acp min. mm Cross-sectional winding area of core Acw mm Weight (approx.) g 52 PC47EER35-Z PC95EER35-Z : ø.35 2UEW Ts 277±25% (1kHz,.5mA) 4 min. (khz, 2mT) 277±25% (1kHz,.5mA) 4±25% loss (W) khz, 2mT 3.18 max.( C) 376W (khz) 4.55/3.8/4.55(25 C/8 C/12 C) 336W (khz) PC47EER35 gapped core (Typical) PC47EER35 core (Typical) EER35 core (Typical) 3 Temperature: C 4 NI=44145 AL NI=371 AL AL= lg PC95EER35 gapped core (Typical) 3 Temperature: C NI=4438 AL 1.44 NI=36795 AL PC95EER35 core (Typical) 4 AL= lg current is and away from its. 1 Measuring conditions : ø.35 2UEW Ts 3-1 / / e141.fm
6 (35/44) EER Series EER4 s 15.4± ±.2 ø13.3±.25 4.± ± factor C1 mm Effective magnetic path length e mm 98. Effective cross-sectional area Ae mm Effective core volume Ve mm Cross-sectional center pole area Acp mm Minimum cross-sectional center pole area Acp min. mm Cross-sectional winding area of core Acw mm Weight (approx.) g 78 PC47EER4-Z PC95EER4-Z : ø.35 2UEW Ts 362±25% (1kHz,.5mA) 516 min. (khz, 2mT) 362±25% (1kHz,.5mA) 52±25% loss (W) khz, 2mT 4.77 max.( C) 484W (khz) 6.8/5.7/6.8(25 C/8 C/12 C) 446W (khz) PC47EER4 gapped core (Typical) PC47EER4 core (Typical) EER4 core (Typical) 3 Temperature: C 4 NI=623 AL 1.42 NI=51971 AL AL= lg PC95EER4 gapped core (Typical) 3 Temperature: C. 1 PC95EER4 core (Typical) 4 AL= lg NI=642 AL NI=55526 AL current is and away from its. 1 Measuring conditions : ø.35 2UEW Ts 3-1 / / e141.fm
7 (36/44) EER Series EER42 s( FEER 42) ø15.5± ± factor C1 mm 1.9 Effective magnetic path length e mm 98.8 Effective cross-sectional area Ae mm Effective core volume Ve mm Cross-sectional center pole area Acp mm Minimum cross-sectional center pole area Acp min. mm Cross-sectional winding area of core Acw mm Weight (approx.) g ± ± ±.25 PC47EER42-Z : ø.35 2UEW Ts 469±25% (1kHz,.5mA) 667 min. (khz, 2mT) loss (W) at C khz, 2mT 6.47 max. 54W (khz) PC47EER42 gapped core (Typical) PC47EER42 core (Typical) EER42 core (Typical) Temperature: C NI=1246 AL NI=7883 AL current is and away from its 4 3 AL= lg Measuring conditions : ø.35 2UEW Ts / / e141.fm
8 (37/44) EER Series EER42/42/2 s ø17.3± ± factor C1 mm Effective magnetic path length e mm 98.6 Effective cross-sectional area Ae mm 2 24 Effective core volume Ve mm Cross-sectional center pole area Acp mm Minimum cross-sectional center pole area Acp min. mm Cross-sectional winding area of core Acw mm Weight (approx.) g ± ± ± PC47EER42/42/2-Z : ø.35 2UEW Ts 534±25% (1kHz,.5mA) 826 min. (khz, 2mT) loss (W) at C khz, 2mT 9.96 max. 647W (khz) PC47EER42/42/2 gapped core (Typical) PC47EER42/42/2 core (Typical) EER42/42/2core (Typical) Temperature: C NI= AL NI=5174 AL current is and away from its 4 3 AL= lg Measuring conditions : ø.35 2UEW Ts / / e141.fm
Product data sheet. JUMO MIDAS Pressure Transmitter. Sales No. Order code JUMO AS 40.1001 401001/000-459-405-502-20-601-61
Produktdatenblatt - JUMO MIDAS Pressure Transmitter JUMO AS Street address: Solheimveien 50, 1470 Lørenskog, Norway Phone: +47 67 97 37 10 Delivery address: Solheimveien 50, 1470 Lørenskog, Norway Fax:
SPM series. Inductors for Power Circuits. Wound Metallic Magnetic Material
September 2014 Inductors for Power Circuits Wound Metallic Magnetic Material SPM series SPM3012 SPM3015 SPM3020 SPM4012 SPM4015 SPM4020 SPM5012 SPM5015 SPM5020 SPM5030 SPM6530 (2/49) REMINDERS FOR USING
SURFACE MOUNT LED LAMP STANDARD BRIGHT 0606
PACKAGE DIMENSIONS 0.075 (1.9) 0.063 (1.6) 0.035 (0.9) TOP 0.047 (1.2) 0.012 (0.3) 0.032 [0.8] SIDE 0.043 [1.1] 1 3 0.020 [0.5] 2 4 BOTTOM CATHODE MASK 1 2 3 4 HER / AlGaAs Red / Yellow (for-34) Green
Piston rod cylinder Tie rod cylinder Series 167. Brochure
Brochure 2 Tie rod cylinder ISO 6431, Ports: G 1/8 - G 1/2 double-acting with magnetic piston cushioning: pneumatically, adjustable Piston rod: external thread 5 Tie rod cylinder ISO 6431, -53 double-acting
The half cell of the storage ring SESAME looks like: Magnetic length =
6. Magnets 6.1 Introduction SESAME will be perhaps erected in steps. The number of steps depends upon the available money. The cheapest way is to use the quadrupole and sextupoles from BESSY I. In this
PTC-Resistor Temperature-Sensors MINIKA to DIN 44 081 and DIN 44 082
PTC-Resistor Temperature-Sensors MINIKA to DIN 44 081 and DIN 44 082 General PTC-resistor temperature sensors (also called PTC-resistors or thermistors) are temperatur dependent semiconductor resistors
HARTING econ 3000 Introduction and features
HARTING Introduction and features HARTING es, unmanaged, for installation in control cabinets General Description Features The Fast es of the product family HARTING are suitable for industrial applications
MILE Encoder for EC 90 flat
MILE Encoders Edition October 2014 MILE Encoder for EC 90 flat Encoders Document ID: 1 495 818-06 ag Brünigstrasse 220 P.O.Box 263 CH-6072 Sachseln Phone +41 41 666 15 00 Fax +41 41 666 16 50 www.maxonmotor.com
B MOTORSPORT COMPONENTS B13. Max Circuit Measurement Characteristic Current Thread Part Number Range Curve [A] Size Connector Figure Comment
![B MOTORSPORT COMPONENTS B13. Max Circuit Measurement Characteristic Current Thread Part Number Range Curve [A] Size Connector Figure Comment](/thumbs/30/14685882.jpg "B MOTORSPORT COMPONENTS B13. Max Circuit Measurement Characteristic Current Thread Part Number Range Curve [A] Size Connector Figure Comment")
B MOTORPORT COMPONENT B TEMPERATURE ENOR Purpose and unction Temperature sensors used in modern engine management systems are of NTC [negative temperature co-efficient] design. imply as temperature rises
DISCONTINUED (1998) FBR46 SERIES. MINIATURE RELAY 2 POLES 1 to 2 A (FOR SIGNAL SWITCHING) RoHS compliant FEATURES
MINIATURE RELAY 2 POLES 1 to 2 A (FOR SIGNAL SWITCHING) FBR46 SERIES RoHS compliant FEATURES Miniature size About 50% smaller in volume compared with the FBR240 series used mainly in communication equipment.
3RT1015-1BB41 CONTACTOR, AC-3 3 KW/400 V,
Automation Technology > Industrial Controls > Switching Devices > Contactors and Contactor Assemblies > Power Contactors for Switching Motors > Contactors SIRIUS 3RT10, 3-pole, 3... 250 kw 3RT1015-1BB41
Ferrostat Speed Sensor Series DSF Explosion Proof Versions EEx
Ferrostat Speed Sensor Series DSF Explosion Proof Versions EEx DSF..10.**.HV Ex ATEX Operating Instructions 374E-64368 Valid from lot nr. 0103 General Function Use in potentially explosive environment
Magnetic and Hydraulic-Magnetic Circuit Breaker 8340-G2...
Magnetic and Hydraulic-Magnetic Circuit Breaker 840-G2... Description Single, two and three pole magnetic circuit breakers with trip-free mechanism and push/pull on/off manual actuation. A choice of fast
CCM05 SD, MMC & minisd
For one of the most common card formats, we offer various reading options in a small and sturdy packaging. This includes the smaller standard of the minisd, designed for the mobile communication needs.
Example of use: Fuse for a solenoid valve. If the fuse is defective, no information is sent to the electronic component.
Overview Switch and button modules The dimensions of the switch and button modules are adapted to the electronic components in the integral housing. The modules are equipped with the universal clip-on
maxiflex Party and Exhibition Hall Type: 10.5/340 Model: 170
Type: 10.5/340 Model: 170 10.18 m 3.26 m Ridge height (D) 4.91 m 4-groove aluminium hollow profile - m Truss-distance (B3) Ground Anchoring Longest component 5.31 m Min. length 10.00 m Type: 10.5/400 Model:
KA/8000/M, KA/8000, ISO cylinder (Stainless steel) Magnetic & Non-magnetic piston, double acting
K/8000/M, K/8000, ISO cylinder (Stainless steel) > > Ø 3... 00 mm > > High corrosion and acid resistance > > Ideal for applications in the food industry > > Conforms to DIN ISO 555, DIN ISO 63, VDM 56
3-Component Measuring System
Force 3-omponent Measuring System for utting Force Measurement During Turning Modular system for measurement of cutting forces when turning outside and inside diameters on turret lathes. Machine adapters
Working Pressure up to 630 bar / 9135 PSI
Test Hoses SMS / SS + Working Pressure up to 630 bar / 9135 PSI Technical Data for Test Hose A B C D Nominal Bore () (mm) Max. Working Pressure (PN) (bar / PSI) 00 / 5801 630 / 9135 30 / 931 630 / 9135
Thermal-Magnetic Circuit Breaker 3120-...-M1-..
Thermal-Magnetic Circuit Breaker -...-M-.. Description Single or two pole rocker switch/thermal-magnetic circuit breaker with trip-free mechanism (S-type TM CBE to EN 34). The addition of a magnetic tripping
Pneumatic Shut-off Butterfly Valve Type 3335/31a SRP or DAP
Pneumatic Shut-off Butterfly Valve Type 3335/31a SRP or DAP Application Tight-closing butterfly valve for process engineering and industrial applications DN 50 to 300 NPS 2 to 12 Nominal pressure PN 10
L-LAS-TB-CL serie. laser light curtains for inline measuring tasks
L-LAS-TB-CL serie laser light curtains for inline measuring tasks Maximum distance 2.000 mm Measurement range 6 up to 98 mm Resolution up to 4 µm up to 1,5 khz scan rate 0-10 V or 4-20 ma analogue output
Thermometer in stainless steel with capillary and switch contacts
Design Type Case diameter Thermometer in and switch contacts 7308 = back flange for wall mounting 7312 = front flange for panel mounting 7310 = mounting bracket for wall mounting Dim 100 mm or 160 mm Accuracy
DSD 70 Dual Channel Hall Effect Speed Sensor for Railway Applications, compliant with EN 50155
DSD 70 Dual Channel Hall Effect Speed Sensor for Railway Applications, compliant with EN 50155 Technical information Version: 07.14 General Function The speed sensors family DSD.70 are suitable for generating
Medium voltage insulator
Medium voltage insulator Line post insulators type R-ET Commercial designation LPI 24 N ET 1) LPI 24 L ET/5 1)2) LPI 24 L ET/6 1)2) LPI 38 L ET 1) esignation acc. to IEC 720 R 12,5 ET 125 N R 12,5 ET 125
Top Microsystems Proprietary Specification P/N: W090015HK-XP 022410RB-082709V.A0 SPECIFICATION
SPECIFICATION High Quality Switching Wallmount Adapter Interchangeable AC Plugs 90-264VAC Input 13.5W 9VDC 1.5A Output P/N: W090015HK-XP ** Specification Approval** This specification (total 11 pages including
DS 600. A contact free flux gate based current measurement sensor 600A rms
DS 600 A contact free flux gate based current measurement sensor 600A rms DS 600 is member of the small housing sensor family. The family includes a 200A and a 600A version. 600A rms - 900A peak Maximum
Industrial VRS Magnetic Speed Sensors
Industrial VRS Magnetic Speed Sensors DESCRIPTION High Resolution VRS sensors are designed for use in applications where precise timing pulse is required, and/or fine pitch gears are used. Proper alignment
Explosion proof enclosures
1 of 7 Explosion proof enclosures DE8 C 2 of 7 The Ex d enclosures are rugged and designed for harsh environment like: Oil and gas industry Chemical industry Pharmaceutical industry Agribusiness Without
BETA Switching. Switching Devices. 5TT5 8 Insta contactors, AC technology. Overview
BETA Switching Siemens AG 200 5TT5 Insta contactors, AC technology Overview The 5TT5 Insta contactors are equipped with an AC magnetic system and are ideal for use under harsh conditions. The auxiliary
DATA PD-500-000. SV13.., SV14.. Levelling Valves. Product. Function. Technical Features. Range Overview
Commercial Vehicle Systems Product DATA SV.., SV.. Doc. No. Y075 (Rev. 00) PD-500-000 Function On vehicles fitted with air suspension, the Levelling Valve ensures that the axle suspension air bags maintain
Compact and highly reliable type available in many varieties. Typical Specifications. Output signal. Rating. Operating life
1 11mm Size Compact and highly reliable type available in many varieties Typical Specifications Items Specifications Output signal Two phase of, B Self-return switch (11 / 10B) m V C ncoders 1,000 cycles
Chapter 14: Inductor design
Chapter 14 Inductor Design 14.1 Filter inductor design constraints 14.2 A step-by-step design procedure 14.3 Multiple-winding magnetics design using the K g method 14.4 Examples 14.5 Summary of key points
Protection Devices for On-Board Chargers
EPCOS Product Brief 2014 Protection Devices for On-Board Chargers www.epcos.com Protection Devices for On-Board Chargers The batteries of electric and hybrid vehicles can be charged either at public charging
FM Radio Transmitter & Receiver Modules
FM Radio Transmitter & Receiver Modules T5 / R5 Features MINIATURE SIL PACKAGE FULLY SHIELDED DATA RATES UP TO 128KBITS/S RANGE UPTO 300 METRES SINGLE SUPPLY VOLTAGE INDUSTRY PIN COMPATIBLE QFMT5-434 TEMP
Pressure reducing valve, direct operated, Type ZDR 6 D
RE 26 57/2.3 Replaces:.2 Pressure reducing valve, direct operated, ype ZDR 6 D Nominal size 6 Series 4X aximum operating pressure 2 bar aximum flow 5 L/min K 4279/ ype ZDR 6 DP2 4X/ Y Overview of contents
TENSIONMETER ** code 183_LNRSTW **
Electronic tension meter for applications in textile and wire industry. 9 Tension ranges from 0.1-200 cn to 5-50 dan. Versatile instruments usable for applications in textile industry: e. g. 50 up to max.
DIN 2391-81 Part II SEAMLESS PRECISION STEEL TUBES
DIN 91-81 Part II SEAMLESS PREISION STEEL TUBES 1.Field of application This defines the technical delivery conditions for seamless precision steel tubes according to DIN 91 Part 1 which are made from the
EVERGREEN (C.P.) USA INC. TEL: (650) 952-8091 FAX: (650) 952-3629 E-MAIL: sales@evergreencpusa.com. SPECIFICATIONS Lithium Battery CR123A- 1700mAh
Voltage (V) Voltage (V) Voltage (V) EVERGREEN (C.P.) USA INC. SPECIFICATIONS Lithium Battery CR123A- 1700mAh Temperature characteristics(20ma) (mah) Pulse discharge characteristics Model CR123A Nominal
ALLOY POWDER CORE SERIES INTRODUCTION
ALLOY POWDER CORE SERIES INTRODUCTION 1 DMEGC alloy powder cores are made from insulated pretreatment alloy powders which have low losses at elevated temperature and have relatively stable inductance over
Operating Instructions. Room temperature controller
Operating Instructions 1. Area of application The room temperature controller is used to regulate the temperature in closed rooms such as flats, schools, function suites, workshops, etc. Safety instructions
Actuator-Sensor-Interface
Selection and ordering data Design Order No. Price Pack 3RX9 307-0AA00 3RX9 307-1AA00 4FD5 213-0AA10-1A 3RX9 305-1AA00 3RX9 306-1AA00 Single output IP 65 current 2.4 A Rated input voltage DC 24 V current
HOSE, TUBE, AND PIPE CLAMPS
hose, tube & clamp B/W pages 24/6/08 9:28 AM Page 2 HOSE, TUBE, AND PIPE CLAMPS TABLE OF CONTENTS Introduction 3 Construction 3 Application 3 Mounting 3 Standard Duty Clamps (HRL) Arrangements 4 Dimensions
Series description: Wilo-Drain TC 40
Series description: Wilo-Drain TC 40 H[m] Wilo-Drain TC 40 10 8 6 4 2 TC 40/8 TC 40/10 0 0 2 4 6 8 10 12 14 Q[m³/h] Design Submersible sewage pump Application Pumping heavily contaminated fluids for House/site
Technical data. General specifications. Signal voltage 15... 30 V DC Signal duration. 1 s Input 2. Signal voltage. 1 s Analog output.
Model Number Features Very small housing High climatic resistance 4 Bit multiturn Analog output Surge and reverse polarity protection Description This absolute rotary encoder with internal magnetic sampling
A cut above the rest. sprintcut. CNC Wirecut EDM
ZAXS I sprintcut Z AXIS sprintcut 4 axes CNC Precision LM guideways for all axes Max. cutting speed : 2 16 mm / min. (With Ø.25 special soft brass wire on 5 mm thick HCHCr (steel) workpiece) 2 14 mm /
Test equipment for temperature and its reduction
Data sheet 90.2721 Page 1/6 Test equipment for temperature and its reduction Pt100 precision RTD temperature probe Calibrated temperature measuring chain with precision display device Calibrations as service
VSO MAX HP High Flow Proportional Valve
VSO MAX HP High Flow Proportional Valve Typical Applications Ventilators Insufflators Anesthesia Delivery & Monitors Pressure & Flow Control Mass Flow Control Product Specifications Physical Properties
QUANTIFYING SOLAR ENERGY
www.sustainicum.at QUANTIFYING SOLAR ENERGY Recommendations for implementation in the course Author: E-Mail address: Institution: Philipp Weihs weihs@mail.boku.ac.at BOKU Important considerations Very
Room Temperature Sensors
1 721 1721P010 1721P020 QAA25 QAA27 oom Temperature Sensors with and without setpoint adjuster...27 Use In heating, ventilating and air conditioning plants, especially where a high level of comfort is
R-78xx-0.5 INNOLINE. Features. 0.5 AMP SIP3 Single Output. Derating-Graph (Ambient Temperature) DC/DC-Converter
Features Description Efficiency up to 97%,Non isolated, no need for heatsinks Pin-out compatible with LM78XX Linears Very low profile( L*W*H=11.5*7.5*10.2 ) Wide input range.(4.75v ~ 32V) Short circuit
Technical catalogue. Modular DIN rail components Installation contactors
Technical catalogue Modular DIN rail components Installation contactors Installation Contactors Overview... ESB Installation Contactors 0 A / AC-/AC-7a ESB0...4 4 A / AC-/AC-7a ESB4...5 40 A / AC-/AC-7a
How to order: Please prefix the mbo part number or description with R239- example: R239-10 01 0004 9001/014
Cotter bolts according to DIN EN 22340/ISO 2340 form A without pin holes form B with pin holes Example for ordering: form A: Bolt without pin holes according to DIN EN 22340/ISO 2340, d=10mm, l=30mm, electroplated
Preset Counter signo 721
Most simple handling Impressive, clearly readable display in 48x48 mm Input frequency up to 60 khz Easy installation due to pluggable terminals TECHNICAL DATA GENERAL Display Height of digits Supply voltage
AC Line Rated Ceramic Disc Capacitors Class X1, 760 V AC / Class Y1, 500 V AC
4L Series AC Line Rated Ceramic Disc Capacitors Class X, 76 V AC / Class Y, 5 V AC FEATURES Complies with IEC 6384-4, 4 th edition High reliability Radial leads High capacitance up to nf Singlelayer AC
TECHNICAL CATALOGUE 2008
TECHNICL CTLOGUE 2008 UNI EN ISO 9001 CERT. n. 95.RI UNI EN ISO 14001 CERT. n. 9191 T2 HE OFFICE 24012 BREMBILL (BERGMO) ITLY Via Caberardi, 3 - Tel. +39 0345 52111- Fax +39 0345 52355 Internet: http://www.arditi.com
Encoder WDGI 58H. www.wachendorff-automation.com/wdgi58h
Encoder WDGI H www.wachendorffautomation.com/wdgih Wachendorff utomation... systems and encoders Complete systems Industrial rugged encoders to suit your application Standard range and customer versions
MHT. Pressure Filters HIGH PRESSURE INLINE FILTER
MHT Pressure Filters HIGH PEUE INLINE FILTE Pressure Filters MHT MHT 4 MPa ( bar) Port sizes: / / Flow rates: 0 l/min TEHNIAL DATA Max. working pressure: 4 MPa ( bar) Max. testing pressure: 6 MPa (60 bar)
Renco Electronics, Inc.
Abstract As high tech electronic products and their power supplies continue to shrink in size the peak current handling capability of power inductors should be looked at closely by the design engineer.
TLI4946. Datasheet TLI4946K, TLI4946-2K, TLI4946-2L. Sense and Control. May 2009
May 2009 TLI4946 High Precision Hall Effect Latches for Industrial and Consumer Applications TLI4946K, TLI4946-2K, TLI4946-2L Datasheet Rev. 1.0 Sense and Control Edition 2009-05-04 Published by Infineon
Description. Dimensions. Features. www.pwb-encoders.com. precision works better
Description The MEC22 is a high resolution optical hollow shaft encoder that can be fixed quickly and easily on different sizes of motor shafts. The encoder provides two square wave outputs in quadrature
Toner Density/Quantity Sensors
Toner Density/Quantity Sensors Permeability sensing type TS series Type: Issue date: TS-L(Double-sided substrate type) TS-(One-sided substrate type) TS-K(One-sided substrate type) February 007 Conformity
Chapter 15: Transformer design
Chapter 15 Transformer Design Some more advanced design issues, not considered in previous chapter: : n Inclusion of core loss + + Selection of operating flux i 1 density to optimize total loss v 1 v Multiple
Audio Jack Detection and Configuration, MIC / GND Cross Point Switch
FS8049 udio Jack Detection and onfiguration, MI / GND ross Point Switch Features Detection V DD THD (MI) ESD (IE 61000-4-2) (ir Gap) udio Plug GND & MI Polarity 2.5 to 4.4 V 0.002% Typical 15 kv Operating
BoWex SD, SD1 and SD2 Operating-/Assembly Instructions
D-807 Rheine 0111 E 1 curved-tooth gear couplings are flexible shaft connections. They are able to compensate for shaft displacement caused by, as an example, inaccuracies in production, heat expansion,
PERMAGRAPH L. for the computer controlled measurement of hysteresis curves of hard magnetic materials. www.magnet-physik.de. Introduction.
Page 1 / 12 PERMAGRAPH L for the computer controlled measurement of hysteresis curves of hard magnetic materials Introduction The PERMAGRAPH is the world-wide known standard equipment for the measurement
MAGNETOSTICTIVE TRANSDUCER
MGNETOSTICTIVE TRNSDUCER MZ Series Key-Features: Content: Technical Data...2 Technical Drawing...3 Electrical Connection...5 Order Code...7 Options & ccessories...8 - vailable measurement ranges from 50-4000
G7SA. Ordering Information. Slim Plug-In Safety Relay. Slim Safety Relay for Machine Control. H Slim body only 13 x 24 x 50 mm
Slim Plug-In Safety Relay Slim Safety Relay for Machine Control H Slim body only 13 x 24 x 50 mm (six poles) H Four-pole and six-pole models are available H Terminal arrangement simplifies PCB pattern
Cable Plug acc. to DIN EN 175301-803, Form A
Cable Plug acc. to DIN EN 175301-803, Form A Complete program Contact form 18 mm Also available with LED indicator Optional 4-pin version for pressure switch or impulse valves respectively Versions with
Type 3353 Angle Seat Valve
Type 3353 Angle Seat Valve Application On/off valve with pneumatic piston actuator Nominal size DN 15 to 50 (NPS ½ to 2) Nominal pressure PN Temperature range 10 to 180 C Globe valve with an angle seat
COMPACT POWER TWIN RELAY
FTR-K1 SERIES COMPACT POWER TWIN RELAY 1 POLE x 2-25A, H-Bridge (for automotive applications) FTR-P4 Series FEATURES Compact for high density packaging High contact capacity with proven contact material
LENORD. +BAUER... automates motion. PowerDRIVE-Positioning GEL 6109 Compact positioning drive for installation situations with limited space
PowerDRIVE-Positioning GEL 6109 Compact positioning drive for installation situations with limited space LENORD +BAUER... automates motion. Technical information Version 2014-09 General The PowerDRIVE-Positioning
MOD 100% kg/ha 1/0 m Imp. 100m Cal. kg ha ha m Eingabe Input C 1l\W VVlÃYLUKHNRRGLÃÅÅ 13 % Error % Eingabe Input - C MOD - MOD - C MOD - MOD.XYDVVDÃÃRKMHOPDÃÅÅÃQl\WW UXXGXQÃÃHQVLPPlLQHQÃQXPHUR 2KMHOPDÃÅÅÃQl\WW
MOTOR PROTECTIVE DEVICES
W MOTOR PROTECTIVE DEVICE, SERIES MP 206 BE400206 BE400306 Inherently stable without back-up fuseup to 4 A at 400 V AC, > 4 A main back-up fuse 100 A gl Thermal and magnetic release Terminal and accessory
EC medium pressure axial fans. The effi cient system solution.
EC medium pressure axial fans. The effi cient system solution. GreenTech EC technology in a new dimension. Thanks to the new axial fans, our highly effi cient GreenTech EC technology is now available for
ABSTRACT 1. INTRODUCTION
Inductor Cores Material and Shape Choices by Mark A. Swihart, Manager of Applications Engineering Magnetics, Division of Spang & Co. Pittsburgh, Pennsylvania USA ABSTRACT A carefully considered power inductor
PC/104, PC/104 -Plus, VarPol connectors
164 PC/104, PC/104 -Plus, VarPol connectors Definitions 166 Technical specifications 168 Hole specifications 169 PC/104 170 PC/104-Plus 172 Accessories: PC/104 and PC/104-Plus 174 VarPol angled pin header
Temperature sensor with integrated transmitter for industrial applications, MBT 3560
Temperature sensor with integrated transmitter for industrial applications, MBT 3560 Technical brochure Features Designed for use in harsh industrial enviroments where reliable, robust and accurate equipment
RoHS. Shock / vibration resistant. Magnetic field proof. Many variants
Sendix 5000 / 500 (Shaft / Hollow shaft) Push-Pull / RS4 ue to their sturdy bearing construction in Safety-ock esign, the Sendix 5000 and 500 offer high resistance against vibration and installation errors.
Type 3510-1 and Type 3510-7 Pneumatic Control Valves Type 3510 Micro-flow Valve
Type 3510-1 and Type 3510-7 Pneumatic Control Valves Type 3510 Micro-flow Valve ANSI version Application Control valve especially designed for controlling low flow rates in pilot plants and technical research
TECHNICAL DATASHEET Incremental Encoder RI 58-H
Through hollow shaft High accuracy by means of integrated flexible coupling Safe shaft mounting Applications: textile machines, motors, drives, copiers NUMBER OF PULSES 1 / 2 / 3 / 4 / 5 / 10 / 15 / 20
LITHIUM BATTERY CR123A SPECIFICATION
LITHIUM BATTERY CR123A SPECIFICATION Date: April 24, 2012 Approved by: Scotty Scott PANASONIC ENERGY CORPORATION OF AMERICA LITHIUM BATTERY DIVISION 1. Designation : CR123A 2. Nominal Voltage : 3 V 3.
servo-controlled 3-WaY vacuum solenoid valves WiTH
servo-controlled 3-WaY vacuum solenoid s WiTH low absorption electric coil The 3-way vacuum solenoid s in this series feature two positions with pneumatically pilot-operated conical shutters. They can
Speed Controller 4-Quadrant PWM configurable via PC
4-Quadrant PWM configurable via PC For combination with: DC-Micromotors and Brushless DC-Servomotors Series Power supply for electronic Power supply for motor Max. continuous output current Max. peak output
Encoder WDG 58B. www.wachendorff-automation.com/wdg58b
Encoder WDG www.wachendorffautomation.com/wdgb Wachendorff utomation... systems and encoders Complete systems Industrial rugged encoders to suit your application Standard range and customer versions Maximum
Copper and Aluminum busbars
Copper and Aluminum busbars Two metals are currently used as conductors in electric panel boards: copper and aluminum In particular, when in need to define a power distribution inside an electric panel
HARTING mcon 3000 Introduction and features
Introduction and features HARTING mcon 3000 es, managed, for mounting onto top-hat mounting rail in control cabinets General Description Features The fully managed es of the product family HARTING mcon
DATA PD-111-400. RE21.., KX..., 1194339 Quick Release Valves. Product. Function. Technical Features. Range Overview
Commercial Vehicle Systems Product DATA Function RE.., KX..., 949 Doc. No. Y058 (Rev. 00) February 0 PD--0 The Quick Release Valve is generally used in the supply to the spring portions of spring brake
User's Guide. Digital Sound Level Meter. Model 407730
User's Guide Digital Sound Level Meter Model 0770 Introduction Congratulations on your purchase of the Extech 0770 Digital Sound Level Meter. The 0770 measures and displays sound pressure levels in db
Micro oil-mist lubricator, Series NL2-LBM G 1/4
Version Micro oil-mist lubricator, an be assembled into blocks Mounting orientation vertical Working pressure min./max. 0.5 bar / 6 bar Medium ompressed air Neutral gases Medium temperature min./max. -0
IP40 or IP64 (EN 60529) Protection class housing. IP50 (IP65 optional) (EN 60529) Minimum length of mountig
Through hollow shaft Ø 5 bis 4 mm Outside diameter only 76 mm Easy installation by means of clamping ring front or rear Operating temperature up to 00 C Applications: motors, printing machines, lifts NUMBER
Technical Manual MDT Rain sensor
9/2012 Technical Manual MDT Rain sensor SCN-RS1R1.01 Technical Manual Rain sensor SCN RS1R1.01 1.1. Settings at the ETS Software Selection at the product database: Manufacturer: MDT Technologies Product
Piston rod cylinder Standard cylinders ISO 15552, series TRB. Brochure
ISO 15552, series TRB Brochure 2 ISO 15552, series TRB Tie rod cylinder Ports: G 1/8 - G 1/2 double-acting with magnetic piston cushioning: pneumatically, adjustable Piston rod: external thread ATEX optional
Type max. stroke length el. stiffness resonance
A. Stack type piezo actuators Low voltage actuators with preloaded casings VS PSt 150/4 / VS9 Prestress force = max. tensile force = approx. 40 N Max. load force: 300 N Max. force generation: 300 N Open
Measurement data monitoring system
We measure it. Measurement data monitoring system testo Saveris Automated and uninterrupted measurement data recording C Stationary and mobile data monitoring in one system Flexible system set-up with
UTS discrete wire sealing
Technical characteristics Mechanical Durability: 250 matings & unmatings Vibration resistance: Sinusoidal vibrations per CEI 605-4 - from 10 to 2000 Hz Thermal shock: 5 cycles 30 min. from -40 C to 105
BETA Protecting SITOR Semiconductor Fuses
BETA Protecting SITOR Semiconductor Fuses /2 Product overview /3 /17 SITOR, cylindrical fuse design /22 SILIZED, NEOZED and DIAZED design Siemens ET B1 /2008 Product overview Overview Devices Page Field
Sensors. Sensors. All Cylinders. Specifications. Features: Features Type REED HALL EFFECT NPN or PNP. Ø8mm - 125mm
Specifications Features Type REED HALL EFFECT NPN or PNP Applicable Series Configurations Construction Materials Body Mounting Bracket Cable Characteristics Operating Temperature Accuracy All Cylinders