KA/8000/M, KA/8000, ISO cylinder (Stainless steel) Magnetic & Non-magnetic piston, double acting
|
|
- Penelope Holmes
- 7 years ago
- Views:
Transcription
1 K/8000/M, K/8000, ISO cylinder (Stainless steel) > > Ø mm > > High corrosion and acid resistance > > Ideal for applications in the food industry > > Conforms to DIN ISO 555, DIN ISO 63, VDM 56 and NFE Technical features Medium: Compressed air, filtered, lubricated or non-lubricated Standard: DIN ISO 555, DIN ISO 63, VDM 56 and NFE Operation: K/8000: Double acting, adjustable cushioning K/8000/M: Double acting, adjustable cushioning and magnetic piston Operating pressure:... 6 bar (... 3 psi) Ports: G/8... G3/ Cylinder diameters: 3, 0, 50, 63, 80, 00, 5, 60, 00 mm Strokes: Standard: See page below Non-standard strokes: vailable (500 mm max.) Operating temperature: +80 C max. (+76 F) ir supply must be dry enough to avoid ice formation at temperatures below + C (+35 F). Materials: arrel: 5 Cr Ni 8 0 (.; ISI ) End covers: 0 Cr Ni S 8 9 (.5; ISI 3) Piston rod: 0 Cr Ni S 8 9 (.5; ISI 3) Nuts and screws: 0 Cr Ni S 8 9 (.5; ISI 3) Tie rods: 5 Cr Ni Mo 7 (.0; ISI 36) Piston rod seals: FPM Piston seals: PU Ø mm, N Ø mm Cushion seals: N O-rings: FPM Technical data Cylinder Ø (mm) Port size G /8 G / G / G 3/8 G 3/8 G / G / G 3/ G 3/ Piston rod Ø (mm) Piston rod thread M0x,5 Mx,5 M6x,5 M6x,5 M0x,5 M0x,5 M7x M36x M36x Initial cushion volume (cm 3 ) Cushion length (mm),3 0, Theoretical thrusts at 6 bar outstroke (N) Theoretical thrusts at 6 bar instroke (N) ir consumption at 6 bar outstroke (l/cm) 0,056 0,088 0,37 0,8 0,35 0,55 0,86,, ir consumption at 6 bar instroke (l/cm) 0,08 0,07 0, 0,95 0,3 0,5 0,79,3, Standard strokes Cylinder Ø (mm) Stroke length (mm) without notice, the specifications given in this document. (998 - c) 05 Norgren GmbH /5 en.5.7.0
2 K/8000/M, K/8000, ISO cylinder (Stainless steel) Cylinder variants Symbol Non-magnetic piston Symbol magnetic piston Description Dimensions Page K/8000 K/8000/M Standard TK/8000 TK/8000/M Cylinder with heat resistant seal (50 C max.) K/8000/W K/8000/W Cylinder with special wiper/seal (polyurethane) for applications with arizona sand, cement, plaster (stucco), hoar-frost or ice (Ø mm) K/8000/W K/8000/MW Cylinder without cushion K/8000/J K/8000/JM Cylinder with double ended piston rod K/8000/W3 K/8000/W Cylinder with double ended piston rod and special wiper/ seal (polyurethane) for applications with arizona sand, cement, plaster (stucco), hoar-frost or ice (Ø mm) For combinations of alternative cylinders consult our technical service. Option selector K/8 / / Non-standard variants High temperature version: 50 C max. Cylinder Ø 03, 00, 050, 063, 080, 00, 5,60, 00 Variants (magnetic piston) Standard Special wiper/seal Without cushion Double ended piston rod Double ended piston rod special wiper/seal Substitute T Substitute Substitute M W MW JM W Strokes (mm) 500 max. Variants (non-magnetic piston) Standard Special wiper/seal Without cushion Double ended piston rod Double ended piston rod special wiper/seal Substitute None W W J W3 Mountings C Position Style Stainless steel Position Style Standard, G 5 Cr Ni 8 0 (.; ISI ). Screws: S Swivel bearing: 5 Cr Ni 8 0 (.; ISI ), bearing: P C 5 Cr Ni 8 0 (.; ISI ). Screws: 5 F Clevis mounting: 0 Cr Ni S 8 9 (.5; ISI 3), olt: 0 Cr Ni S 8 9 (.5; ISI 3), Circlip: 0 Cr Ni S 8 9 (.5; ISI 3) 5 D 5 Cr Ni 8 0 (.; ISI ). Screws: olt: 0 Cr Ni S 8 9 (.5; ISI 3) 6 SW 6 Cr Ni 8 9 (.8; ISI ) racket for switches UH djustable intermediate mounting: 0 Cr Ni S 8 9 (.5; ISI 3), olts: 0 Cr Ni S 8 9 (.5; ISI 3), screws: 7 UF 0 Cr Ni S 8 9 (.5; ISI 3), Inner ring 05 Cr Co Mo 8- (.58), Outer ring 5 Cr Ni 8 0 (.; ISI ) ody: P/PP, screw and holding strap en without notice, the specifications given in this document. (998 - c) 05 Norgren GmbH /5
3 K/8000/M, K/8000, ISO cylinder (Stainless steel), G C D F S SW UF UH Cyl. Ø Page 5 Page 5 5 Page 5 5 Page 5 3 KQ/803/ KQ/803/ KQ/803/3 KQM/5533/5 KQ/803/ M/P788 KQM/803/3 KQ/803/0 0 KQ/800/ KQ/800/ KQ/800/3 KQM/55/5 KQ/800/ M/P789 KQM/800/3 KQ/800/0 50 KQ/8050/ KQ/8050/ KQ/8050/3 KQM/555/5 KQ/800/ M/P790 KQM/8050/3 KQ/8050/0 63 KQ/8063/ KQ/8063/ KQ/8063/3 KQM/555/5 KQ/8063/ M/P79 KQM/8050/3 KQ/8063/0 80 KQ/8080/ KQ/8080/ KQ/8080/3 KQ/8080/5 KQ/8063/ M/P79 KQM/8080/3 KQ/8080/0 00 KQ/800/ KQ/800/ KQ/800/3 KQ/8080/5 KQ/800/ M/P793 KQM/8080/3 KQ/800/0 5 KQ/85/ KQ/85/ KQ/85/3 KQ/85/5 KQ/800/ KQM/85/3 KQ/85/0 Page 6 6 Page 6 7 Page 6 Page 6 M/50/** Switch mounting brackets for M/50 Service kit Cyl. Ø Page Page 8 3 QM/7// KQ/803/00 0 QM/7// KQ/800/00 50 QM/7// KQ/8050/00 63 QM/7// KQ/8063/00 80 QM/7// KQ/8080/00 00 QM/7// KQ/800/00 5 QM/7// KQ/85/00 60 QM/7// KQ/860/00 00 QM/7// KQ/800/00 /5 without notice, the specifications given in this document. (998 - c) 05 Norgren GmbH en
4 K/8000/M, K/8000, ISO cylinder (Stainless steel) asic dimensions K/8000, K/8000/M Standard cylinder WH G 8 + # G - VD P P V E M KW EE EE ø e KK P ø e MM h 9 KV SW T 9 G T H G ø mm ø mm H # Stroke Cushion screw T G Ø M P Ø e Ø e G H E EE G KK KV KW , G /8 7,5 M0x, , G / 3 Mx, G / 3 M6x, , G 3/8 33 M6x, ,5 5 5, G 3/8 33 M0x, ,5 9 5 G / 37 M0x, G / 6 M7x 3, , G 3/ 50 M36x ,5 3 0 G 3/ 50 M36x Ø Ø MM h 9 P T SW V VD WH at 0 mm per 5 mm non-magnetic piston magnetic piston ,5 M , kg 0,06 kg K/803/* K/803/M/* 0 6, M 6 3 3,5 6,65 kg 0,08 kg K/800/* K/800/M/* ,5 6,5 M 8 7 3,5 6 37,57 kg 0,3 kg K/8050/* K/8050/M/* ,5 M ,95 kg 0, kg K/8063/* K/8063/M/* M ,6 kg 0, kg K/8080/* K/8080/M/* ,5 89 M ,67 kg 0,3 kg K/800/* K/800/M/* ,5 0 M 7 6 5,5 65 0,8 kg 0,5 kg K/85/* K/85/M/* M ,3 kg 0,88 kg K/860/* K/860/M/* M ,0 kg, kg K/800/* K/800/M/* * Please insert standard stroke length. Cylinder variants K/8000/J, K/8000/JM Cylinder with double ended piston rod Ø ZM at 0 mm per 5 mm non-magnetic piston magnetic piston 3 6,7 kg 0,08 kg K/803/J/* K/803/JM/* 0 65,80 kg 0, kg K/800/J/* K/800/JM/* 50 80,8 kg 0,9 kg K/8050/J/* K/8050/JM/* 63 95, kg 0,0 kg K/8063/J/* K/8063/JM/* ,8 kg 0,0 kg K/8080/J/* K/8080/JM/* 00 0, kg 0, kg K/800/J/* K/800/JM/* 5 90,9 kg 0,67 kg K/85/J/* K/85/JM/* 60 39,5 kg,3 kg K/860/J/* K/860/JM/* ,39 kg,39 kg K/800/J/* K/800/JM/* * Please insert standard stroke length. ZM + x # en without notice, the specifications given in this document. (998 - c) 05 Norgren GmbH /5
5 K/8000/M, K/8000, ISO cylinder (Stainless steel) Mountings Front flange, G Conforms to ISO 555, type MF and MF UF Foot mounting C Conforms to ISO 555, type MS TF MF F E T H U O ø T E Ø E Ø F MF TF UF kg (, G) ,6 KQ/803/ ,3 KQ/800/ ,56 KQ/8050/ ,73 KQ/8063/ ,73 KQ/8080/ ,5 KQ/800/ Ø Ø H O T U E T kg (C) ,6 KQ/803/ ,9 KQ/800/ ,3 KQ/8050/ , KQ/8063/ ,83 KQ/8080/ ,98 KQ/800/ ear clevis D Conforms to ISO 555, type MP Piston rod clevis F Conforms to DIN ISO 80 H U C F CE E K C CM ø CK h EK f 8 C E KK Ø C H Ø EK f8 F H U kg (D) , KQ/803/ ,6 KQ/800/ , KQ/8050/ ,3 KQ/8063/ ,5 KQ/8080/ ,9 KQ/800/3 Ø KK CE Ø CK h C CM E E K kg (F) 3 M0x, ,09 KQM/5533/5 0 Mx, ,3 KQM/55/5 50/63 M6x, ,5 0,33 KQM/555/5 80/00 M0x, ,67 KQM/8080/5 /5 without notice, the specifications given in this document. (998 - c) 05 Norgren GmbH en
6 K/8000/M, K/8000, ISO cylinder (Stainless steel) Trunnion support S Conforms to ISO 555, type T Wide hinge SW Conforms to ISO 555, type 7 ø D 3 T H H H7 ø D F x 5 ø CK H 9 ø D EM C G ø D C H ø S K G G 3 K Ø C ØD H7 3 F x 5 H T kg (S) ,5 6,6 5 6,8 0, KQ/803/ 0/ , , KQ/800/ 63/ , ,8 KQ/8063/ 00/ , ,3 KQ/800/ Ø C Ø CK Ø EM G H K Ø kg H9 D 3 S (SW) ,6 0 6,6 0,5 M/P ,6 6,6 0, M/P , , M/P , ,53 M/P ,5 5 0,8 M/P ,5 9, M/P793 Universal piston rod eye UF Conforms to DIN ISO 839 djustable trunnion mounting UH Conforms to ISO 555, type MT CN H 7 CE EN -0, KK Z Z UW ø TD e 9 E E T TM h ocking screws Torque max: Ø 3 & 0 mm = 6 Nm; Ø 50 & 63 mm = 0 Nm; Ø 80 & 00 mm = 5 Nm; Ø 5 mm = 5 Nm Ø Thread CE Ø EN E E Z kg (UF) KK CNH7-0, 3 M0x, ,5 3 0,07 KQM/803/3 0 Mx, , , KQM/800/3 50/63 M6x, ,5 5 0, KQM/8050/3 80/00 M0x, , ,38 KQM/8080/3 Ø Ø TD e9 T TM h UW V min. V max. kg (UH) ,5 8,5 0, KQ/803/0 0, ,8 KQ/800/0 50 8, ,7 KQ/8050/0 63 8, ,35 KQ/8063/0 80 8, ,6 KQ/8080/ ,76 KQ/800/ ,8 KQ/85/0 Style UH : It is most important that the locking screws which secure the mounting to the tie rod are tightened to the torque figures shown in the table below. For maximum energy input, consult our Technical Service. Unless otherwise specified, units will be supplied with dimension V plus half the stroke length. V = Distance from the piston rod shoulder to the centre of the mounting. en without notice, the specifications given in this document. (998 - c) 05 Norgren GmbH /5
7 K/8000/M, K/8000, ISO cylinder (Stainless steel) Technical data - eed switches - additional informations see data sheet N/en Symbol Voltage Current Function Operating ED Protection Plug Cable Cable Weight maximum temperature class length type (V a.c.) (V d.c.) (m) ( C) (m) (g) ~ + N Closer IP66, 5 or 0 PVC x 0,5 37 M/50/SU/*V Closer IP66 5 PU x 0,5 37 M/50/SU/5U ~ U Closer IP66 Silicon x 0,5 37 TM/50/U/S N U K U N + N ~ Changeover IP66 5 PVC 3 x 0,5 37 M/50/C/5V Closer IP66 M8 x 0,3 PVC 3 x 0,5 6 M/50/SU/CP *) ~ K * Insert cable length; *) Plug-in connector see page ; Color code: K = black, N = brown, U = blue Drawings M/50/SU/*V, M/50/SU/5U, TM/50/U/S Cable length =, 5 or 0 m - 5, M/50/C/5V Cable length = 5 m 5, ø 6, ø 6,, ,5 3 M/50/SU/CP - 5, 0 ±5 3, K ø 6,,5 N 3 U Fixing screw + N = brown; - U = blue (output) 3 - K = black; + N = brown; - U = blue Plug M8 x, color code: K = black; N = brown; U = blue ccessories Plug-in connector cable with nut Outer cover Cable length (m) Weight (kg) Connector Connector PVC 3 x 0,5 5 m 0,8 M8 x M/P70/5 PU 3 x 0,5 5 m 0,8 M8 x M/P70/5 PU 3 x 0,3 5 m 0, M x M/P359/5 /5 without notice, the specifications given in this document. (998 - c) 05 Norgren GmbH en
8 K/8000/M, K/8000, ISO cylinder (Stainless steel) Technical data - Solid state - additional informations see data sheet N/en Symbol pnp + N U K Voltage (V d.c.) Current maximum (m) Function Operating temperature ( C) ED Protection class Plug Cable length (m) Cable type Weight (g) PNP IP67, 5 or 0 PVC 3 x 0, 37 M/50/EP/*V PNP IP68 5 PU 3 x 0, 37 M/50/EP/5U pnp npn npn N U K U + N K + U N K PNP IP67 M8 x 0,3 PVC 3 x 0, 6 M/50/EP/CP *) PNP IP67 M x 0,3 PVC 3 x 0, 6 M/50/EP/CC *) NPN IP67, 5 or 0 PVC 3 x 0, 37 M/50/EN/*V Closer IP67 M8 x 0,3 PVC 3 x 0, 6 M/50/EN/CP *) * Insert cable length; *) Plug-in connector below; Color code: K = black, N = brown, U = blue Drawings M/50/EP/*V, M/50/EN/*V Cable length =, 5 or 0 m - 5, + ± ø 6,,5 M/50/EP/CP, M/50/EN/CP - 5, 0 ±5 3, K ø 6,,5 3 N 3 U M/50/EP/CC - 5, 7,5 0 ±5 K 3 U ø 6,,5 N Fixing screw Color code: K = black; N = brown; U = blue 3 Plug M8 x Plug M x QM/7// Switch mounting brackets Switch: M/50 Cyl. Ø Weight (kg) ,00 QM/7// ,00 QM/7// ,00 QM/7// ,00 QM/7// ,00 QM/7// 00 0,00 QM/7// ,00 QM/7// ,00 QM/7// ,00 QM/7// Switch mounting bracket Magnetically operated switch en without notice, the specifications given in this document. (998 - c) 05 Norgren GmbH /5
9 K/8000/M, K/8000, ISO cylinder (Stainless steel) Warning These products are intended for use in industrial compressed air systems only. Do not use these products where pressures and temperatures can exceed those listed under»technical features/data«. efore using these products with fluids other than those specified, for non-industrial applications, life-support systems or other applications not within published specifications, consult IMI NOGEN. Through misuse, age, or malfunction, components used in fluid power systems can fail in various modes. The system designer is warned to consider the failure modes of all component parts used in fluid power systems and to provide adequate safeguards to prevent personal injury or damage to equipment in the event of such failure. System designers must provide a warning to end users in the system instructional manual if protection against a failure mode cannot be adequately provided. System designers and end users are cautioned to review specific warnings found in instruction sheets packed and shipped with these products. /5 without notice, the specifications given in this document. (998 - c) 05 Norgren GmbH en
RM/55401/M, Roundline cylinder Magnetic piston, double acting
RM/550/M, Roundline cylinder > > Ø... 00 mm > > Clean line design > > ow friction, long life seals > > Standard magnetic piston for full control system versatility Technical features Medium: Compressed
More informationRM/8000/M, ISO cylinder Magnetic piston, double acting
> > Ø 0... 5 mm > > Magnetic piston as standard > > Conforming to ISO 6 > > Corrosion resistant- With buffer or adjustable cushioning > > Nose mounting nut and piston rod supplied locknut as standard Technical
More informationPRA/182000/M; PRA/182000 Pneumatic cylinder, ISO 15552 Non-magnetic & magnetic piston, double acting Ø 32... 125 mm
P/8000/M; P/8000 Pneumatic cylinder, ISO 555 Non-magnetic & magnetic piston, double acting 3... 5 mm High performance, stability and reliability M/50 switches can be mounted flush with the profile Cylinders
More informationRA/8000/M, RA/8000 Pneumatic cylinder, ISO 15552 Non-magnetic & magnetic piston, double acting Ø 32... 320 mm
Pneumatic cylinder, ISO 555 Non-magnetic & magnetic piston, double acting 3... 30 mm Comprehensive range for the utmost versatility Conforms to ISO 555 (ISO 643, VDM 456 and NFE 49-003-) High performance,
More information97300 NAMUR series, 3/2 & 5/2 Indirect solenoid actuated spool valve
9700 NAMUR series, / & / > > Port size: G/, / NPT, NAMUR Interface > > Crossover-free switching > > Main application: Single and double acting actuators > > / way valve usable as / way valve > > Manual
More informationCylinders Series 40. Double acting, cushioned, magnetic ø160-200 - 250 (DIN/ISO 6431)
Cylinders Series 40 Double acting, cushioned, magnetic ø60-200 - 250 (DIN/ISO 643)»»» DIN/ISO 643 VDMA 24562 Rolled stainless steel rod Adjustable cushioning The cylinders Series 40 with diameters 60,
More informationISO/VDMA Actuators. Engineering GREAT Solutions
ISO/VDMA Actuators Engineering GREAT Solutions 02 ISO/VDMA Actuators Contents 03 Introduction 04 ISO/VDMA Actuators 06 The ISO/VDMA Range 08 Industrial Options 10 Cleanline Options 12 IVAC innovation to
More informationPiston rod cylinder Tie rod cylinder Series 167. Brochure
Brochure 2 Tie rod cylinder ISO 6431, Ports: G 1/8 - G 1/2 double-acting with magnetic piston cushioning: pneumatically, adjustable Piston rod: external thread 5 Tie rod cylinder ISO 6431, -53 double-acting
More informationNormcylinder 1.5002. Technical data. tension-rod cylinder. according DIN ISO 6431 VDMA 24562 DI/DIM DIM DIMB
Normcylinder Universal application through accomodating on DIN ISO 6431 and VDMA 24562 Part 1. Fastening elements according DIN ISO 6431, VDMA 24562 Part 2. Technical data Tension-rod-cylinder according
More informationPiston rod cylinder Standard cylinders ISO 15552, series TRB. Brochure
ISO 15552, series TRB Brochure 2 ISO 15552, series TRB Tie rod cylinder Ports: G 1/8 - G 1/2 double-acting with magnetic piston cushioning: pneumatically, adjustable Piston rod: external thread ATEX optional
More informationUM/22000 5/2 & 5/3 valves, solenoid and pilot actuated ISO 5599-1, ISO size 1, 2, 3 & 4 Sub-base mounted
U/ / & / valves, solenoid and pilot actuated ISO 99-, ISO size,, & Sub-base mounted Steel reinforced main seals 6 bar and bar NOO solenoid pilots with locking or non-locking manual override Low power coils
More informationExtruded Body Cylinders, ISO 6431, ISO 15552 compliant Series 62
1 ISO / VDMA Cylinders NORTH AMERICAN CYLINDER & ACTUATOR CATALOG > Release 8.5 Extruded Body Cylinders, ISO 6431, ISO 15552 compliant Series 62 Double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80,
More informationUM/22000 5/2 or 5/3 Solenoid and air pilot actuated soft spool valves
U/ / or / > > Sub-base mounted, 99- s,, or > > Steel reinforced main seals > > Low power coils (,W) > > Wide range of sub-bases and accessories > > 6 bar and bar NOO solenoid pilots with locking or non-locking
More informationPiston rod cylinders Standard cylinders ISO 15552, series PRA. Brochure
ISO 15552, series PRA Brochure 2 ISO 15552, series PRA Profile cylinder Ports: G 1/8 - G 1/2 double-acting with magnetic piston Cushioning: pneumatically, adjustable Piston rod: external thread ATEX optional
More informationDOUBLE ACTING CYLINDERS, Ø 32 to 125 mm
DOUBLE ACTING CYLINDERS, 3 to 15 mm conforming to ISO 6431 - VDMA 456 STANDARDS SERIES 450 - TYPE : PES (with profiled barrel) P30-GB.R8 DOUBLE ACTING PNEUMATIC CYLINDERS - TYPE PES WITH PROFILED BARREL
More informationCylinders DIN ISO 6431 and VDMA 24 562
Double acting Standard executions Version Shape of barrel Symbol Type MAGNETIC STANDARD AMA AMT 1 For the magnetic reed switches type ASV see from page 1.110.1. For coupling cylinders/reed swiches/brackets
More informationRotary actuators Rotary wing drives Series RAK. Brochure
Brochure 2 Rotary wing drives, angle of rotation: 30-270 Rotary wing drive, double-acting axis geometry: single 4 Rotary wing drives, angle of rotation: 90-270 Rotary wing drive, double-acting axis geometry:
More informationStainless Steel Cylinders DIN ISO 6431 and VDMA 24 562
Bores from 32 to 200 mm Double acting Standard executions Version Symbol TYPE MAGNETIC STANDARD AMX STAINLESS STEEL For the magnetic reed switches type ASV see from page 1.110.1. For coupling cylinders/reed
More informationSensors. Sensors. All Cylinders. Specifications. Features: Features Type REED HALL EFFECT NPN or PNP. Ø8mm - 125mm
Specifications Features Type REED HALL EFFECT NPN or PNP Applicable Series Configurations Construction Materials Body Mounting Bracket Cable Characteristics Operating Temperature Accuracy All Cylinders
More informationPort size 32 12 G1/8 RA/8032/* RA/8032/M/* QA/8032/00 100 25 G1/2 RA/8100/* RA/8100/M/* QA/8100/00
Actuators ISO/VDMA Cylinders RA/8000/M Ø 32 to 320 mm Conforms to ISO 6431, VDMA 24562 and NFE 49-003-1 High performance, ruggedness and reliability Extensive range of mountings Technical data Medium:
More informationVP23, 3-way proportional pressure control valves Seat valve with μp-driven pressure control
VP, -way proportional pressure control valves > > Port size: G/... G/ > > All-digital control electronics > > Variable pressure control > > Optional actuation via fieldbus (separate datasheet on request)
More informationT-Series Precision Linear Actuators Installation and Service Manual DW110353GB-1018 - EDITION 5. www.thomsonlinear.com
T-Series Precision Linear Actuators Installation and Service Manual DW110353GB-1018 - EDITION 5 www.thomsonlinear.com Version History Edition Number Edition Date Reason for Revision 1 2004 First edition
More informationValve series MN-06 acc. to NAMUR, 3/2-way G1/4 750 Nl/min (0.762 Cv)
Valve series MN-06 acc. to NAMUR, 3/2-way G1/4 750 Nl/min (0.762 Cv) Order code Series and function 1) Plug socket see page 5.042. MN-06-310-HN-442 Standard coil 1) 441 = 12 V DC, 4.2 W 442 = 24 V DC,
More informationHydraulic cylinder Mill type. CDL2 type. Contents. Features. RE 17326 Version: 2013-06 Replaces: 12.12. Series L2 Component series 1X
Hydraulic cylinder Mill type CDL2 type RE 17326 Version: 2013-06 Replaces: 12.12 Series L2 Component series 1X 2 pressure ranges: Nominal pressure 160 bar [16 MPa] Nominal pressure 250 bar [25 MPa] Features
More informationTyco PremiAir Pneumatic Actuators
A comprehensive range of pneumatic actuators, conforming to EN ISO 5211, providing compact, reliable and economical powered operation for all types of quarter turn valves. Features Mounting to valve either
More information4/2-Way Pneumatic Solenoid Valve
4/2-Way Pneumatic Solenoid Valve Robust servo assisted piston valve Service friendly manual override Single or block assembly Explosion-proof versions Type 5413 cam be combined with Type 2508 Cable plug
More informationCable Plug acc. to DIN EN 175301-803, Form A
Cable Plug acc. to DIN EN 175301-803, Form A Complete program Contact form 18 mm Also available with LED indicator Optional 4-pin version for pressure switch or impulse valves respectively Versions with
More informationInductive sensor NI10-M18-Y1X-H1141
ATEX category II 1 G, Ex zone 0 ATEX category II 1 D, Ex zone 20 SIL2 as per IEC 61508 Threaded barrel, M18 x 1 Chrome-plated brass DC 2-wire, nom. 8.2 VDC Output acc. to DIN EN 60947-5-6 (NA- MUR) M12
More informationLinear modules Lifting units Rotary modules Grip modules Inductive proximity switches Plug connectors
20000 Linear modules Lifting units Rotary modules Grip modules Inductive proximity switches Plug connectors 23000 22000 21000 20000 09000 08000 07000 06000 05000 04000 03000 02000 01000 823 Notes 824 Technical
More informationGivare NC-SRS 280 och 880
Givare NC-SRS 280 och 880 Aratron AB/Nordic Control, 02 03 SRS280SEALED ROTARY SENSOR PERFORMANCE ±2 Resistance ±20% Hysteresis (repeatability) Accuracy Applied voltage maximum Resolution Output smoothness
More informationProportional pressure regulators VPPE
Proportional pressure regulators VPPE Proportional pressure regulators VPPE Product range overview Function Version Pneumatic connection Proportional pressure regulator Nominal size for pressurisation/
More informationHow To Control A Power Supply With A Mini Transmitter And Switch (Power Supply)
transmitter (2 wire) / switch for continuous or On/Off Control Indication, monitoring, transmitting and continuous or On/Off control in one device Output signal 4...20 ma, 2-wire for continuous control
More informationOil Dampers with Fixings on. Both Ends. Damping Engineering Oil Dampers with Fixings on Both Ends. Technical Data
amping Engineering Oil ampers with Fixings on Both Ends Oil dampers with fixings on both ends are used when moving objects may not exceed a certain speed e.g. flaps, lids, lever arms. They are fixed at
More informationHydraulic cylinders Tie rod design. Type CD70 / CG70. Contents. Features. RE 17016 Edition: 2014-03 Replaces: 08.08
Hydraulic cylinders Tie rod design Type CD / CG RE 1 Edition: 2014-03 Replaces: 08.08 Series Component series 1X Nominal pressure bar [7 MPa] Features Contents types of mounting Piston Ø (ØAL)... mm Piston
More informationPneumatic actuators The Original! Technics of the top class.
Automatic valves Actuators Accessories Pneumatic actuators The Original! Technics of the top class. Leaflet no. S1-01e-13 Table of contents Advantages and your benefits...page 3 Figure: actuator...page
More informationMagnetic and Hydraulic-Magnetic Circuit Breaker 8340-G2...
Magnetic and Hydraulic-Magnetic Circuit Breaker 840-G2... Description Single, two and three pole magnetic circuit breakers with trip-free mechanism and push/pull on/off manual actuation. A choice of fast
More informationPiston Accumulators. SK Series. Accumulator Catalog. Piston Types. Description. Sealing Systems. End Cap. O-ring. Sealing System. Piston.
SK Series Piston Types TYPE 2 pplication: Low-friction design for higher piston speeds, slow movements without stick-slip effect and high number of actuations (millions). ctual cycles achieved will vary
More information-U- Type to be discontinued
Standard cylinders DNU/DNUL, For new designs use standard cylinders DNC 1 / 1.2-24 Double-acting For contactless position sensing Comprehensive range of accessories 2003/10 Subject to change Products 2004/2005
More informationHow To Use A Flowmeter
INLINE flowmeter for continuous flow measurement Economic integration in pipe systems without any additional piping 3-wire frequency pulse version to directly interface with PLC s (both PNP and NPN) Connection
More informationElectrically operated valves Series M-05, 3/2-, 5/2- and 5/3-way G1/8 650 and 750 Nl/min (0.661 and 0.762 Cv)
Electrically operated valves Series M-05, 3/2-, 5/2- and 5/3-way G1/8 650 and 750 Nl/min (0.661 and 0.762 Cv) Order code Series and function M-05-310-HN-442 Standard coil HN at ports 2 + 4 HN at ports
More information2/8.10.01. These vacuum switches are used in measuring ranges between -1 and 0 bar.
CATALOGUE > Release 8.5 > Electronic vacuum switches Series SWM Electronic miniature vacuum switches Series SWM These vacuum switches are used in measuring ranges between -1 and 0 bar. Small dimension
More informationIMPORTANT DOCUMENTATION DO NOT DISCARD!
PART NO.: 6441-263C SERIES GRT 3 JAW PARALLEL GRIPPERS INFORMATION SHEET IMPORTANT DOCUMENTATION DO NOT DISCARD! Use this information sheet to assist with gripper installation and setup. File with maintenance
More informationPosition Transducers with Restoring Spring 10, 25, 50, 75, 100 mm TR, TRS Series
Position Transducers with Restoring Spring 10, 25, 50, 75, 100 mm TR, TRS Series Special features long life 100 x 10 6 movements outstanding linearity up to ±0.075% choice of plug or cable connection DIN
More information3/2, 5/2, 5/2 bistable and 5/3 way pneumatic solenoid valve
3/2, 5/2, 5/2 bistable and 5/3 way pneumatic solenoid valve Type 6518 Type 6519 Type 6518/6519 can be combined with... Single or block mounting Suitable for outdoor and chemical atmospheres Suitable for
More information3/2-, 5/2- and 5/3-way Solenoid Valves for process pneumatics
3/2-, 5/2-5/3-way Solenoid Valves for process pneumatics Type 6518 stard High flow-rate capacity Reduced power consumption Single or manifold mounting stard Type 6518/6519 can be combined with... Stard-,
More informationElectro-pneumatic control valves
Electropneumatic control valves 7 Miniature solenoid valves for alternating current Conform to the Low Voltage Directive or mounting on subbase or footprint in accordance with CNOMO recoendation E 066120N
More information3/2-way Solenoid Valve, direct-acting, NC or NO
3/2-way Solenoid Valve, direct-acting, NC or NO Electrical connection cable plug, Form A With or without manual override as standard Threaded port and sub-base s Impulse optional Type 6014 can be combined
More informationDiwiTherm, Resistance Thermometers Model TR75, with digital Display Battery or Solar Powered
Electrical Temperature Measurement DiwiTherm, Resistance Thermometers Model TR75, with digital Display Battery or Solar Powered WIKA Data Sheet TE 60.75 Applications Machinery, plant and tank construction
More informationTECHNICAL CHARACTERISTICS. Series K---- Codification key SERIES
Pneumatic cylinders mm according to ISO 643 and VDMA 56 with adjustable cushioning UNIVER pneumatic cylinders which comply with ISO 643 and VDMA 56 standards, take advantage of the improvements arising
More informationTechnical data. General specifications. Indicators/operating means. 30 Hz Multiplex operation 30 Hz / n, n = number of sensors, n 5
Model Number Single head system Features Parameterization interface for the application-specific adjustment of the sensor setting via the service program ULTRA 000 programmable switch outputs Hysteresis
More informationMini slide, Series MSN narrow version Ø 6-16 mm double-acting with magnetic piston cushioning: elastic with integrated ball rail guide
Piston rod cylinder uide cylinders ini slide, Series SN 1 Ambient temperature min./max. +0 C / +60 C edium Compressed air ax. particle size 5 µm Oil content of compressed air 0 mg/m³ - 1 mg/m³ Pressure
More informationElectric Lifting Cylinder TV / KV 5 XE Load up to 6.500 N
S+R S+R automation systems GmbH Electric Lifting Cylinder TV / KV 5 XE Load up to 6.500 N Lifting Moving Positioning Design and functuion An electric lifting cylinder is an electro-mechanical drive unit.
More informationDigital inductive conductivity transmitter
Digital inductive conductivity transmitter Optimal solution for conductivity measurements in difficult fluids (polluted, dirty,...) PEEK/PPA version for CIP applications Large range of process connections
More informationCYLINDER SERIES ISO 15552 (EX ISO 6431), Ø 32-63 mm TWO-FLAT
YIR SRIS ISO 2 (X ISO 3), - mm TWO-T This version of cylinder is used to keep the parts fixed to the piston rod at an angle and to apply torques within the specified limits. The piston rod of the Two lat
More information2/2 and 3/2 Way Size 6 Seat Valves
2/2 and 3/2 Way Size 6 Seat Valves Directly operated Interface and subplate dimensions according to DIN 24340 and ISO Line connection port size G 3/8" Cartridge design PN [p max. ] = 315 bar 7501856.06.12.08
More informationCompensation Unit in X-, Y-, and Z-Direction AGE-S-XYZ 100-200
Translation of the original manual Compensation Unit in X-, Y-, and Z-Direction AGE-S-XYZ 100-200 Assembly and Operating Manual Superior Clamping and Gripping Imprint Imprint Copyright: This manual remains
More informationAIR-AIR PRESSURE MULTIPLIER (BOOSTER)
AIR-AIR PRESSURE MULTIPLIER (BOOSTER) The air-air pressure multiplier, or booster, is an automatic device that compresses air to give an outlet pressure that is double the inlet pressure. It is normally
More informationPD30ETB20xxIS. Photoelectrics, Background Suppression reflective with IR light. Main features. Description
Photoelectrics, Background Suppression reflective with IR light Main features Description The PD30ET... stainless steel sensors are built with high-quality materials and designed for harsh environments.
More informationPPS-PPQ-BT-PIAS RESIN INSULATORS FOR OIL INSULATED ELECTRICAL MACHINES
PPS-PPQ-BT-PIAS RESIN INSULATORS FOR OIL INSULATED ELECTRICAL MACHINES BUSHING WITH PLUG CONNECTION WITH OUTER CONE PPS CHARACTERISTICS The PPS bushing can be used as a fixed section for the entry of medium
More informationRichter Twin Piston Quarter-turn Actuators
Richter Twin Piston Quarter-turn ctuators R ompact Powerful Maintenance-free R ouble-acting quarter-turn actuators The actuators are the optimum automation units in technical and commercial terms for Richter
More informationDigital display DA 48
Loop powered plug-in LCD display No auxiliary energy source needed Scale freely adjustable on site Can be turned to any position Suitable for any 0 ma transmitter with EN 175301-803A connector Digital
More informationCross-beam scanning system to detect slim objects. 100 mm 3.937 in
891 Object Area Sensor General terms and conditions... F-17 Related Information Glossary of terms... P.1359~ Sensor selection guide...p.831~ General precautions... P.1405 PHOTO PHOTO Conforming to EMC
More informationFluid. Flu. Fluid Fluid. uid Power d Power P. Fluid Power P. Fluid Power. Fluid Power Power. d Power. Directional Cetop Valves DCV 03.
Catalogue Directional Cetop Valves DCV 03 Power Flu uid Power d Power P wer Power Power Power Power Power d Power Power Power ower Power Power wer Power Power P Power Power Powe d Power Power Power Power
More information- CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEAL 301 - DIMENSIONS AND WEIGHT 400 PUMP 400 PACKING 401
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 70 204 PERFORMANCE CURVE 90 205 PERFORMANCE CURVE 120 206 PERFORMANCE CURVE 200 207 - CONSTRUCTIONS
More informationTechnical data. General specifications. Indicators/operating means. Electrical specifications Operating voltage U B Power consumption P 0 Interface
Release date: 06-0- 09: Date of issue: 06-0- 009_eng.xml Model Number Single head system Features Parameterization interface for the application-specific adjustment of the sensor setting via the service
More informationControl- and feedback head for integrated mounting on Robolux valves Type 2036
Control- and feedback head for integrated mounting on Robolux valves Type 203 Type 885 Type 88 can be combined with Compact stainless steel design Contactless valve position registration Coloured illuminated
More informationFerrostat Speed Sensor Series DSF Explosion Proof Versions EEx
Ferrostat Speed Sensor Series DSF Explosion Proof Versions EEx DSF..10.**.HV Ex ATEX Operating Instructions 374E-64368 Valid from lot nr. 0103 General Function Use in potentially explosive environment
More informationRPE3-04. Functional Description HA 4014 10/2010. Directional Control Valves Solenoid Operated. Replaces HA 4014 12/2007
Directional Control Valves Solenoid Operated RPE3-04 Size D 04 (02) 320 bar (4600 PSI) 30 L/min(8.0 GPM) HA 4014 10/2010 Replaces HA 4014 12/2007 4/3-, 4/2- way directional control valves with solenoid
More informationCompact cylinder Double acting single rod type. SSD SSD-L (with switch) Double acting Compressed air 1.0. 1.6-10 to 60 (no freezing) Rc1/8 Rc1/4 Rc3/8
* U S 4 Specifications escriptions Bore size mm Actuation Working fluid ax. working pressure Pa in. working pressure Pa Withstanding pressure Pa Ambient temperature Port size Stroke length Rubber cushioned
More informationProduct data sheet. JUMO MIDAS Pressure Transmitter. Sales No. Order code JUMO AS 40.1001 401001/000-459-405-502-20-601-61
Produktdatenblatt - JUMO MIDAS Pressure Transmitter JUMO AS Street address: Solheimveien 50, 1470 Lørenskog, Norway Phone: +47 67 97 37 10 Delivery address: Solheimveien 50, 1470 Lørenskog, Norway Fax:
More informationTurbine Flow Sensor Series VTR
Turbine Flow Sensor Series VTR SIKA Turbine Flow Sensor Series VTR Extra robust, impressively precise SIKA s VTR turbine flow sensor allows you to determine precisely, dependably and easily the flow rates
More informationRoHS. Shock / vibration resistant. Magnetic field proof. Many variants
Sendix 5000 / 500 (Shaft / Hollow shaft) Push-Pull / RS4 ue to their sturdy bearing construction in Safety-ock esign, the Sendix 5000 and 500 offer high resistance against vibration and installation errors.
More informationStandard cylinders DNG/DNGZK/DNGZS, ISO 15552
Features Brief description Double-acting For contactless position sensing With adjustable end-position cushioning at both ends Robust tie rod design Standards-based cylinders to ISO 15552 (corresponds
More informationTable of Contents, Magnetic Field Sensors. Introduction to Magnetic Field Sensors... 380
Proximity Switches Table of Contents, Magnetic Field Sensors Proximity Sensors.3 Magnetic Field Sensors.2.3 Introduction to Magnetic Field Sensors... 380 Operating Distance and Responsiveness Mounting
More informationSITEMA PowerStroke. Technical Information TI-P12. 1 Function. 2 Applications. Mould Closing Devices series FSKP. Contents
SITEMA PowerStroke FSP ocking, actuating and releasing by pneumatic pressure English translation of German original Technical Information TI-P1 SITEMA PowerStroke Mould Closing Devices series FSP drive
More information3/2, 5/2, 5/2 bistable and 5/3 way pneumatic solenoid valve
3/2, 5/2, 5/2 bistable and 5/3 way pneumatic solenoid valve Type 6518 Type 6519 Type 6518/6519 can be combined with... Single or block mounting Suitable for outdoor and chemical atmospheres Suitable for
More informationkymanual or Automatic - it s your Choice
. kymanual or Automatic - it s your Choice ky LKB Automatic or Manual Butterfly Valve Application LKB is a sanitary automatically or manually operated butterfly valve for use in stainless steel pipe systems.
More informationFITTINGS 5-01. 82A series Aluminium (light weight) compression fittings Ø 6... 42 mm tube size, BSPP and BSPT thread
FITTINS 82 series luminium (light weight) compression fittings Ø 6... 42 mm tube size, SPP and SPT thread 82 series rass compression fittings Ø 6... 42 mm tube size, SPP and SPT thread 83 series luminium
More informationSOLENOID VALVES 3-4 WAY
SOLENOID VLVES - WY IE/C// CT: FP/VCR Page: 7 SHEET: / SOLENOID VLVES - - WY CV SOLENOID VLVES -WY/-POSITION /- UNF.7 5.7 The electric valve is a -way -position directional electrically controlled Slight
More informationDisplacement encoders
Displacement encoders Analogue and digital For measuring and positioning For use with pneumatic components 1 Displacement encoders Key features Analogue displacement encoders MLO-POT- -TLF Conductive plastic
More informationHow To Drive A Compact Serie 1
Electric lifting cylinder Compact Series Table of Contents Glossary... 2 Compact serie SR 1... 4 Dimension SR 1... 5 Compact Serie SR 1SP... 6 Dimension SR 1SP... 7 Compact Serie SR 5... 8 Dimension SR
More informationRelative and absolute pressure switch type 529
Relative and absolute pressure switch type 529 Pressure range -1... 0 60 bar The compact type 529 pressure switch is based upon the Huba Control developed unique ceramic technology used for the last 20
More informationElectric Rotary Actuator - On/Off or programmable control actuator
Electric Rotary Actuator - On/Off or programmable control actuator Direct mounting on quarter-turn valves Manual override standard Corrosion resistant Adjustable limit switches Multi-voltage version Type
More information400 Series Buccaneer BUCCANEER POWER. bulgin
bulgin BUCCANEER FOR POWER Contact Retainer Sealing Gasket O Ring Contacts Locking Ring Retaining Nut Panel Body Contacts Contact Carrier O Ring Main Body Cable Gland Collet Gland Nut Sealed to IP68 when
More informationSupplementary instructions. Connection cable IP 66/IP 68 (1 bar) Retrofitting set/accessory for instruments of the plics family. Document ID: 34107
Supplementary instructions Connection cable IP 66/IP 68 (1 bar) Retrofitting set/accessory for instruments of the plics family Document ID: 4107 Contents Contents 1 For your safety 1.1 Appropriate use...
More informationLED MACHINE ILLUMINATIONS
white LED light industrial-suited housing energy-efficient ipf electronic gmbh Kalver Straße 25-27 58515 Lüdenscheid Germany fon +49 (0) 2351/9365-0 fax +49 (0) 2351/936519 e-mail: info@ipf-electronic.com
More information3/2- and 2/2-way cartridge valve type BVE
3/2- and 2/2-way cartridge valve type BVE for any flow direction, zero leakage, all ports pressure resistant Flow Q max = 70 lpm Perm. pressure p max = 400 bar Additional valves with same function: ' Type
More informationRODLESS BAND CYLINDERS WITH CARRIER BRACKET-TYPE STB SERIES 446
RODESS AND CYINDERS WITH CARRIER RACKET-TYPE ST SERIES 446 OPERATING PRINCIPE Set in motion with pneumatic energy, the piston moves in an extruded alumunium tube containing a slot running the length of
More informationUnit 24: Applications of Pneumatics and Hydraulics
Unit 24: Applications of Pneumatics and Hydraulics Unit code: J/601/1496 QCF level: 4 Credit value: 15 OUTCOME 2 TUTORIAL 2 HYDRAULIC AND PNEUMATIC CYLINDERS The material needed for outcome 2 is very extensive
More informationChapter 6: Check Valves
Contents Chapter : Check Valves Series Description Size Mounting Page Parker Standard DIN / ISO 1/8 1/4 3/8 1/2 3/4 1 0 10 1 25 32 Shuttle valves SSR -2 Check valves, direct operated RK / R CS SPZE SPV
More informationConductive Level Switch FK 2 Technical Data:
Level switch for conductive liquids Optional electrode length adjustment Hygienic installation in accordance with EHEDG Wetted parts compatible with FDA requirements Potted electronic Not influenced by
More informationFluid Level Gauge Fluid Level Sensor Temperature Switch FSA / FSK / TS
Fluid Level Gauge Fluid Level Sensor Temperature Switch FSA / FSK / TS up to size 381; to PN 0.5; to T = 80 C 1. Description 1.1. General FSA fluid level gauges, FSK fluid level sensors and TS temperature
More informationSmall U-shaped Micro Photoelectric Sensor. Enables space saving and quick installation!
4 Small Micro Photoelectric Amplifier Built-in PM-44 SERIES PM-4 SERIES General terms and conditions... F- selection guide... P.44~ Related Information Glossary of terms / General precautions... P.39~
More informationDirect Operated Regulator for 6.0 MPa (Relieving Type) How to Order. Body size 30 40
Direct Operated Regulator for (Relieving Type) Series Service life: 0 million cycles Using NSF-H-certified grease on the guide ring (sliding) part. Improved durability under a high environment with a polyurethane
More informationMagnetic field sensor for pneumatic cylinders BIM-INT-Y1X-H1141
ATEX category II 1 G, Ex zone 0 ATEX category II 1 D, Ex zone 20 SIL2 as per IEC 61508 Rectangular, height 6mm Plastic, PA12 Magnetic-inductive sensor DC 2-wire, nom. 8.2 VDC Output acc. to DIN EN 60947-5-6
More informationMAGNETOSTICTIVE TRANSDUCER
MGNETOSTICTIVE TRNSDUCER MZ Series Key-Features: Content: Technical Data...2 Technical Drawing...3 Electrical Connection...5 Order Code...7 Options & ccessories...8 - vailable measurement ranges from 50-4000
More informationDXPE*J 85 320/215 ED. DIRECtIONAL CONtROL VALVE PILOt OPERAtED, WItH OBE AND FEEDBACK. Q max (see performance table) SERIES 30
85 320/215 ED DXPE*J DIRECtIONAL CONtROL VALVE PILOt OPERAtED, WItH OBE AND FEEDBACK SUBPLAtE MOUNtINg DXPE5J CEtOP P05 DXPE5RJ ISO 4401-05 (CETOP R05) DXPE7J ISO 4401-07 (CETOP 07) DXPE8J ISO 4401-08
More informationThermometer in stainless steel with capillary and switch contacts
Design Type Case diameter Thermometer in and switch contacts 7308 = back flange for wall mounting 7312 = front flange for panel mounting 7310 = mounting bracket for wall mounting Dim 100 mm or 160 mm Accuracy
More informationSITEMA PowerStroke. Technical Information TI-P11. 1 Function. 2 Applications. Mould Closing Devices series FSK. Contents
English translation of German original Technical Information TI-P11 SITEMA PowerStroke Mould Closing Devices series FS drive system for powerful forces on a short stroke hydraulic actuation closing force
More informationClear Glass Sensor. Ordering Information E3S-CR67/62. Optimum Sensor for Detecting Transparent Glass and Plastic Bottles
Clear Glass Sensor Optimum Sensor for Detecting Transparent Glass and Plastic Bottles E3S-CR67/62 Retroreflective Sensor smoothly detects 5-mm gaps. Detects transparent bottles that have a lens effect.
More information