Top Microsystems Proprietary Specification P/N: W090015HK-XP RB V.A0 SPECIFICATION

Transcription

1 SPECIFICATION High Quality Switching Wallmount Adapter Interchangeable AC Plugs VAC Input 13.5W 9VDC 1.5A Output P/N: W090015HK-XP ** Specification Approval** This specification (total 11 pages including cover page) is approved in it s entirety by: Company Name Print Name Signature Date 3261 Keller St. Santa Clara CA95054 Tel: Fax: infor@topmicro.com Web: Page 1 of 10

2 CONTENTS 1. INTRODUCTION 2. INPUT REQUIREMENTS 3. OUTPUT REQUIREMENTS 4. EFFICIENCY 5. LINE REGULATION 6.HOLD UP TIME 7.TURN ON TIME 8.TEMPERATURE COEFFICIENT 9. DIELECTRIC STRENGTH (Hi-Pot) TEST 10. INSULATION RESISTANCE 11. PROTECTION 12. ENVIRONMENTAL CONDITIONS 13. EMI/ EMC 14. RELIABILITY AND QUALITY CONTROL 15. SAFETY 16. OVERALL DRAWING 17. CAUTION 18. PACKING 19. LABEL Page 2 of 11

3 1.0 INTRODUCTION This document specifies a switching power supply with a output of +9V, and electronic process. The switching power supply will provide power for technology equipments including electrical business equipment.the adaptor meets the requirement of lead free and RoHS. 2.0 INPUT REQUIREMENTS 2.1 Input Voltage Range: 100 (-10%)VAC to 240(+10%)VAC 2.2 Input Frequency Range: 47 Hz to 63 Hz 2.3 Input Power Consumption at no-load : 0.5W MAX 2.4 Input In-rush Current: 50A Max 2.5 Input Current: 0.6A Max 3.0 OUTPUT REQUIREMENTS 3.1 Output Voltage: 3.2 Output Regulation: +9V 8.55V-9.45V 3.3 Output Load Range: 0-1.5A 3.4 Output Ripple & Noise: 120mV bandwidth with 22UF/50V capacitance and 104/50V ceramic capacitor. 4.0 OF 25/50/75/100% LOADS 115&230VAC INPUT 73.42% 5.0 LINE REGULATION: 2% MAXIMUM 6.0 HOLD UP TIME: 10ms MIN AT 110VAC FULL LOAD. 7.0 TURN ON TIME: 2S MAX AT 110VAC FULL LOAD. 8.0 TEMPERATURE COEFFICIENT: 0.05%/ C 9.0 DIELECTRIC STRENGTH (Hi-Pot) TEST 9.1 Finished product withstands AC 3.0KV, for 2 second, 4mA max primary to secondary. 9.2 Finished product withstands AC 3.0KV, for 2 second, 4mA max primary to case. Page 3 of 11

4 10.0 INSULATION RESISTANCE Primary to secondary: 50MOHM to 500VDC PROTECTION 11.1 Input Protection The switching power supply has a 2 amps inner current fuse to protect itself Output Protection Output Current: Overload conditions shall decrease the output voltage. Removal of an output overload shall provide automatic recovery for the output voltage Short Circuit Protection: Auto Recovery ENVIRONMENTAL CONDITIONS The switching power supply can withstand the following environmental conditions: 12.1 Storage Temperature:-20? ~ +70? Relative Humidity: 10% ~ 95% 12.2 Operation Temperature:0 C~40 C Relative Humidity: 10%~95% 13.0 EMI / EMC The switching power supply has approved by the following standards: FCC PART 15B AS/NZS 55022/55024 (1)EN55022(EN EN ) (2)EN55024(IEC IEC IEC IEC IEC IEC ) 14.0 RELIABILITY AND QUALITY CONTROL 14.1 Burn-in The burn-in test will be performed at least 2 hours at 40 centigrade degrees under full load condition. Page 4 of 11

5 15.0 SAFETY The switching power supply has approved by the following safety standards: UL (First Edition) CAN/CSA-C22.2 No IEC : 2001, EN : 2001 AS/NZS60950 Page 5 of 11

6 16. OVERALL DRAWING UNIT: mm month year made in china 46.5±1 37±1 77±1 35-J Date Code Safety Marking AWG#20 6.0FT MIN (Overmold diameter) Ø ± ±0.5 Ø5.5±0.1 Ø2.1±0.1 Page 6 of 11

7 UNIT: mm 37±1 46.5±1 37±1 77±1 B 46.5±1 37±1 37±1 77±1 Page 7 of 11

8 17. CAUTION WARNING! Please don't insert plug alone at the wall. B B Page 8 of 11

9 17. PACKING 17.1 Inner Box UNIT: mm BUBBLE BAG Length : 160 Width : 150 Width Length BOX Length:145 Width:75 Height:65 height length width Page 9 of 11

10 18. PACKING 18.2 Carton UNIT: mm MODEL: N.W.: G.W.: Q'TY: 60PCS 100V~120V 200V~240V 100V~240V 100V~120V 200V~240V 100V~240V (Transverse Plane) Page 10 of 11

11 19. LABEL UNIT: mm R2.0 Switching Power P/N: W090015HK-XP Input: V 50/60Hz 0.6A Output: 9V 1.5A E LPS IV JET CAUTION: RoHS RISK OF SHOCK. DRY LOCATION ONLY. L/N: yyww Made in China Page 11 of 11