HOSE, TUBE, AND PIPE CLAMPS

Save this PDF as:
 WORD  PNG  TXT  JPG

Size: px
Start display at page:

Download "HOSE, TUBE, AND PIPE CLAMPS"

Transcription

1 hose, tube & clamp B/W pages 24/6/08 9:28 AM Page 2 HOSE, TUBE, AND PIPE CLAMPS TABLE OF CONTENTS Introduction 3 Construction 3 Application 3 Mounting 3 Standard Duty Clamps (HRL) Arrangements 4 Dimensions 5 Heavy Duty Clamps (HRS) Arrangements 6 Dimensions 7 Twin Clamps (HRZ) Arrangements 8 Dimensions 9 Standard Duty Clamps with Rubber Inserts (HREL) Arrangements 10 Dimensions 11 Heavy Duty Clamps with Rubber Inserts (HRES) Arrangements 12 Dimensions 13 Parts Standard Duty Clamps (HRL) 14 Heavy Duty Clamps (HRS) 15 Twin Clamps (HRZ) 16 Standard Duty Clamps with Rubber Inserts (HREL) 17 Heavy Duty Clamps with Rubber Inserts (HRES) 18 Technical Specifications 19 Recommended Distance Between Clamps 19 Properties of Material (Clamp Pairs) 19 2

2 hose, tube & clamp B/W pages 24/6/08 9:28 AM Page 3 INTRODUCTION Our clamps and mounting systems are designed and manufactured by our ISO 9001 Certified HY-ROS division. HYDAC clamps assure a simple, reliable dampening support for tubes, pipes, hoses, and conduits in industrial hydraulic systems, mobile hydraulic systems, process industries, and electrical construction. HYDAC clamps absorb shock, dampen vibration, and reduce noise in hydraulic systems. HYDAC design Engineers have extensive experience in working closely with customers, in evaluating their requirements, and developing custom clamp arrangements to satisfy the most demanding applications. Whether standard or custom HYDAC products, we are ready to address your requirements. CONSTRUCTION HYDAC clamps are available in a wide range of s and materials. Polypropylene (PP) is used for standard clamps and Polyamide (PA) or Aluminum (AL) for special applications. The HYDAC type HRE clamps have rubber inserts for soft gripping of hose, pipe, and tubing. HRE clamps are designed as hose and tube supports for high cyclic pressure applications. Weld plates are phosphate coated. All standard duty top plates and heavy twin duty s 1 to 4 top plates are zinc plated. Heavy duty s 5 to 8 top plates are phosphate coated. All heavy duty double top plates (DDP) are phosphate coated. Stainless steel hardware is also available. APPLICATION Standard Duty Clamps (HRL) Available to 2 tube outside diameter. Recommended for systems with less than 1500 PSI operating pressure and no dynamic loads. Heavy Duty (HRS) Available to 16 nominal pipe Recommended for systems with greater than 1500 PSI operating pressure, operations with pressure surges and applications with wide temperature fluctuations. Note: Combinations of pressure surges and temperature fluctuations require double clamps, see page 6. Twin Clamps (HRZ) Available to 1-1/4 nominal pipe. Recommended for systems with less than 1500 PSI operating pressure and no dynamic loads. Rubber Insert Clamps (HRE) Standard duty available to 1-1/4 bore diameter. Heavy duty available to 5-1/4 bore diameter. Recommended for soft gripping of hose. MOUNTING Proper clamp location is necessary for reliable mounting of piping systems. Clamps should be mounted as follows: The first clamp should be located directly after a threaded connection or coupling to protect against vibration. Bends in a pipe should be clamped on each side. A clamp should be located on each side of an inline valve. Refer to table on page 19 for recommended distance between clamps. 3

3 hose, tube & clamp B/W pages 24/6/08 9:28 AM Page 4 Standard Duty Clamps: Arrangements A Single Clamp with Weld Plate A1 Single Clamp Stacking Kit A1TM Single Clamp for C-Rail Mounting (order C-Rail separately) D Single Clamp Stacking Module (not available for 0) Note: 3 max. stacking modules recommended Weld Plate order separately B Single Clamp without Top Plate (Internal Hex) Parts Legend 1 Hex Head Bolt 5 Clamp Pair 2 Top Plate 6 Stacking Bolt 3 Weld Plate 7 Insert 4 Safety Plate 8 C-Rail Nut Note: To order parts, refer to page 14 Model Code: HRL 2 A 12.7 PP Metal Component Material 0 to 6 (refer to table A) omit - Carbon Steel A4 - Stainless Steel 316 Arrangement A - Single clamp with top plate and weld plate PP - Polypropylene B - Single clamp without top plate D - Single clamp stacking module (not available for 0) AL - Aluminum A1 - Single clamp stacking kit (not available for 0) A1TM - C-Rail mounted clamp Bore (in mm) (refer to table A) 4

4 hose, tube & clamp B/W pages 24/6/08 9:28 AM Page 5 Standard Duty Clamps: Dimensions.12 (3) a 3.39 (10).37 (9.5).12 (3) a 3 a 1 A Arrangement ø d ø d h 1.12 (3) a 3 a 3 ø d ø d h1 h 1 h 2 h 2 a (30).12 (3) a (30) a 1 B Arrangement Internal Hex h 1 h 3 h 3 Table A Ød Recommended a1 a2 a3 h1 h2 h3 Bolt Weight Bore Nominal in. in. in. in. in. in. Arrangement A/B lbs. (kg) in mm Tube O.D. Pipe (mm) (mm) (mm) (mm) (mm) (mm) in. A B /4 - M6 x / /8 - N/A A B (30) (28) (16) (32) (29) (0.06) (0.05) / M6 x /4 - M6 x / /8 - A B (20) (36) (34) (16) (32) (29) (0.08) (0.06) / M6 x (3) a (30) /2 - M6 x A B /8 - (26) (42) (40) (19.5) (39) (36) (0.12) (0.07) /8 M6 x (3) a (30) Note: Dimensions are shown in inches (millimeters) /4 - M6 x / A B (33) (50) (48) (21.5) (43) (40) (0.14) (0.10) M6 x / M6 x 45 B (40) (59) (57) (24) (48) (45) A M6 x 35 (0.15) (0.12) /4 - M6 x A B /2 - (52) (72) (70) (32) (64) (61) (0.19) (0.14) /4 M6 x / / M6 x (66) (88) (86) (36) (72) (69) A B (0.24) (0.18) M6 x 60 C-Rail and C-Rail Nut Dimensions.43 (11).43 (11) 1/4" -20 UNC 1/4" -20 M6UNC C-Rail Plastic Cap C-Rail Nut Plastic Cap.08 (2) 1.10 (28).08 (2).43 (11) 1.10 (28).43 (11).96 (24.5) 39 (10).96 (24.5).20 (5) 39 (10).20 (5).59 (15).59 (15) 5

5 hose, tube & clamp B/W pages 24/6/08 9:28 AM Page 6 Heavy Duty Clamps: Arrangements S Single Clamp with Weld Plate S1 Single Clamp Stacking Kit (s 1-5 only) S1TM Single Clamp for C-Rail Mounting (s 1-4 only, order C-Rail separately) A Single Clamp Stacking Module (s 1-5 only) Note: 3 max. stacking modules recommended Weld Plate order separately D Double Clamp Parts Legend 1 Hex Head Bolt 6 Stacking Bolt w/ Washer 2 Top Plate 7 C-Rail Nut 3 Weld Plate 8 Double Top Plate 4 Safety Plate 9 Double Weld Plate 5 Clamp Pair Note: To order parts, refer to page 15 Model Code: HRS 1 S 12.7 PP 0 to 10 (refer to table B) PP - Polypropylene AL - Aluminum Arrangement Bore (in mm) S - Single clamp with top plate & weld plate (refer to table B) D - Double clamp with weld plate S1 - Single clamp stacking kit (s 1-5 only) S1TM - C-Rail mounted clamp (s 1-4 only) A - Single clamp stacking module (s 1-5 only) 6

6 hose, tube & clamp B/W pages 24/6/08 9:28 AM Page 7 Heavy Duty Clamps: Dimensions a 3 s h 2 s ø d h 1 a 1 a 2 b 1 b 3 b 2 Table B Ød Recommended a1 a2 a3 b1 b2 b3 h1 h2 s Weight Bore Nominal in in in in in in in in in Bolt lbs (kg) in mm Tube O.D. Pipe (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) in A B / / / / / / /8 single double Note: Dimensions are shown in inches (millimeters) M10 x 45 (33) (73) (55) (30) (60) (31) (24) (48) (8) (0.37) (0.30) / / / / M10 x 60 (45) (85) (70) (30) (60) (31) (32) (64) (8) (0.48) (0.44) / M10 x /2 - (60) (100) (85) (30) (60) (31) (38) (76) (8) (0.58) (0.57) / / / / / / / M12 x 100 (90.5) (140) (115) (45) (90) (46) (55) (110) (10) (1.41) (1.50) M16 x 130 (122) (180) (152) (60) (120) (61) (70) (140) (10) (2.59) (2.86) / M20 x /2 4 (168) (225) (205) (80) (160) (81) (100) (200) (15) (7.23) (6.77) M24 x (205) (270) (252) (90) (180) (91) (115) (230) (15) (9.09) (6.36) / M30 x (265) (340) (320) (120) (240) (121) (160) (320) (25) (23.18) (24.50) M30 x (395) (520) (466) (160) (320) (161) (235) (470) (30) (60) M30 x (535) (680) (630) (180) (360) (182) (295) (590) (30) (135) C-Rail and C-Rail Nut Dimensions C-Rail.50 (12.5).87 (22).79 (20) C-Rail Nut.45 (11.5) 3/8" M10-16 UNC.24 (6).28 (7).91 (23) C-Rail Nut.45 (11.5) 7/16" M12-14 UNC.24 (6).33 (8.5) 1.57 (40).20 (5) s 1-4 s

7 hose, tube & clamp B/W pages 24/6/08 9:28 AM Page 8 Twin Clamps: Arrangements A Twin Clamp with Weld Plate A1 Twin Clamp Stacking Kit D Twin Clamp Stacking Module Note: 3 max. stacking modules recommended A1TM Twin Clamp for C-Rail Mounting (order C-Rail separately) Parts Legend 1 Hex Head Bolt 5 Clamp Pair 2 Top Plate 6 Stacking Bolt w/ Washer 3 Weld Plate 7 C-Rail Nut 4 Safety Plate Note: To order parts, refer to page 16 Weld Plate order separately Model Code: HRZ 1 A PP 0 to 5 (refer to table C) PP - Polypropylene Arrangement Bore (in mm) A - Twin clamp with weld plate (refer to table C) A1TM - C-Rail mounted twin clamp D - Twin clamp stacking module A1 - Twin clamp stacking kit 8

8 hose, tube & clamp B/W pages 24/6/08 9:28 AM Page 9 Twin Clamps: Dimensions h 2 h 3 ø d ø d h 1.20 (5) a 1 a 3 a (30) Table C Note: Dimensions are shown in inches (millimeters). Ød Recommended a1 a2 a3 h1 h2 h3 Bore Nominal in in in in in in Bolt Weight in mm Tube O.D. Pipe (mm) (mm) (mm) (mm) (mm) (mm) in lbs (kg) / / /8 - (20) (37) (36) (18.5) (27) (43) (M6 x 35) (0.09) / / / M8 x /8 - (29) (55) (53) (18) (26) (43.5) (0.14) / / / M8 x /8 - (36) (70) (67) (23.5) (37) (54.5) (0.18) / M8 x 50 (45) (85) (82) (26) (42) (59.5) (0.20) / M8 x /2 - (56) (110) (106) (32) (54) (71.5) (0.27) /4 Note: Other metric jaws available on request, standard tube s listed only. C-Rail and C-Rail Nut Dimensions C-Rail C-Rail Nut C-Rail Nut.43 (11) 1/4" -20 M6UNC 39 (10) M8 5/16"-18 UNC.43 (10.8).08 (2).43 (11).96 (24.5).94 (24) Plastic Cap 1.10 (28).20 (5).59 (15).20 (5).51 (13) s s 2-5 9

9 hose, tube & clamp B/W pages 24/6/08 9:28 AM Page 10 Standard Duty Clamps With Rubber Inserts: Arrangements A Single Clamp with Weld Plate A1 Single Clamp Stacking Kit D Single Clamp Stacking Module Note: 3 max. stacking modules recommended A1TM Single Clamp for C-Rail Mounting (order C-Rail separately) Weld Plate order separately Model Code: HREL 4 A 12-7 PP Parts Legend 1 Hex Head Bolt 5 Clamp Pair 2 Top Plate 6 Rubber Insert 3 Weld Plate 7 Stacking Bolt 4 Safety Plate 7 C-Rail Nut Note: To order parts, refer to page 17 Metal Components Materials 4, 6 (refer to table D) omit - Carbon Steel A4 - Stainless Steel 316 Arrangement A - Single clamp with weld plate A1TM - C-Rail mounted clamp D - Single clamp stacking module A1 - Single clamp stacking kit PP - Polypropylene Bore (in mm) (refer to table D) 10

10 hose, tube & clamp B/W pages 24/6/08 9:28 AM Page 11 Standard Duty Clamps with Rubber Inserts: Dimensions a3 a1 s ø d ø d 1 h1 ø d 2 h2 a (30) s Table D Note: Dimensions are shown in inches (millimeters). EE-Rubber Insert Recommended Clamp Bore Nominal D1 D2 H1 H2 A1 A2 A3 S Bolt Weight ø D Tube Hose O.D. in in in in in in in in (in) lbs (kg) Pipe in mm O.D. Min (in) Max (in) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) / / /4 L / M6 x (25.5) (31) (23.5) (47) (40) (59) (57) (3) (0.15) / / / / / /6 L / M6 x (39) (46) (35.5) (71) (66) (88) (86) (3) (0.31) / C-Rail and C-Rail Nut Dimensions C-Rail C-Rail Nut.43 (11) 1/4" -20 M6UNC Plastic Cap.08 (2) 1.10 (28).43 (11).96 (24.5) 39 (10).20 (5).59 (15) 11

11 hose, tube & clamp B/W pages 24/6/08 9:28 AM Page 12 Heavy Duty Clamps With Rubber Inserts: Arrangements S Single Clamp with Weld Plate S1 Single Clamp Stacking Kit A Single Clamp Stacking Module Note: 3 max. stacking modules recommended S1TM Single Clamp for C-Rail Mounting (order C-Rail separately) Weld Plate order separately Parts Legend 1 Hex Head Bolt 5 Clamp Pair 2 Top Plate 6 Rubber Insert 3 Weld Plate 7 Stacking Bolt 4 Safety Plate 7 C-Rail Nut Note: To order parts, refer to page 18 Model Code: HRES 4 S 35 PP 2 to 7 (refer to table E) PP - Polypropylene Arrangement Bore (in mm) S - Single clamp with weld plate (refer to table E) S1TM - C-Rail mounted clamp A - Single clamp stacking module S1 - Single clamp stacking kit 12

12 hose, tube & clamp B/W pages 24/6/08 9:28 AM Page 13 Heavy Duty Clamps with Rubber Inserts: Dimensions a3 a1 h1 h2 s Table E a2 b s Note: Dimensions are shown in inches (millimeters). EE-Rubber Insert Recommended Clamp Bore Nominal D1 D2 B H1 H2 A1 A2 A3 S Bolt Weight ø D Tube Hose O.D. in in in in in in in in in (in) lbs (kg) Pipe in mm O.D. Min (in) Max (in) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) / / /4 L / M10 x (25.5) (31) (30) (23.5) (47) (40) (59) (57) (3) (0.15) / / / / / /6 L / M10 x (39) (46) (30) (35.5) (71) (66) (88) (86) (3) (0.31) / / M12 x (65) (74) (45) (53.5) (107) (90.5) (140) (115) (10) (1.44) / M16 x (89) (98) (60) (68.5) (137) (122) (180) (152) (10) (6.73) / / M20 x (116) (132) (80) (98.5) (197) (168) (225) (205) (15) (6.73) / M24 x (154) (168) (90) (113.5) (227) (205) (270) (252) (15) (10.4) C-Rail and C-Rail Nut Dimensions C-Rail.50 (12.5).87 (22).79 (20) C-Rail Nut.45 (11.5) 3/8" M10-16 UNC.24 (6).28 (7).91 (23) C-Rail Nut.45 (11.5) 7/16" M12-14 UNC.24 (6).33 (8.5) 1.57 (40).20 (5) s 1-4 s

13 hose, tube & clamp B/W pages 24/6/08 9:28 AM Page 14 Standard Duty Clamps: Parts 1 Hex Head Bolt 0 HRL0 - ASKT M6 x 30 0 (B arrange) HRL0 - ISKT M6 x 20 1 HRL1 - ASKT M6 x 30 1(B arrange) HRL1 - ISKT M6 x 20 2 HRL2 - ASKT M6 x 35 2 (B arrange) HRL2 - ISKT M6 x 25 3 HRL3 - ASKT M6 x 40 4 HRL4 - ASKT M6 x 45 5 HRL5 - ASKT M6 x 60 6 HRL6 - ASKT M6 x 70 6 (B arrange) HRL6 - ISKT M6 x 60 6 AF = Stacking Bolt 1 HRL 1 AF6 ST 2 HRL 2 AF6 ST 3 HRL 3 AF6 ST 4 HRL 4 AF6 ST 5 HRL 5 AF6 ST 6 HRL 6 AF6 ST 2 DP = Top Plate 0 HRL 0 DP ST ZN 1 HRL 1 DP ST ZN 2 HRL 2 DP ST ZN 3 HRL 3 DP ST ZN 4 HRL 4 DP ST ZN 5 HRL 5 DP ST ZN 6 HRL 6 DP ST ZN 7 HRL 7 DP ST ZN 7 Washer 1 DIN x6x0.8 ST A3C 2 DIN x6x0.8 ST A3C 3 DIN x6x0.8 ST A3C 4 DIN x6x0.8 ST A3C 5 DIN x6x0.8 ST A3C 6 DIN x6x0.8 ST A3C 3 AP = Weld Plate 0 HRL 0 AP ST - M - ZN 1 HRL 1 AP ST - M - ZN 2 HRL 2 AP ST - M - ZN 3 HRL 3 AP ST - M - ZN 4 HRL 4 AP ST - M - ZN 5 HRL 5 AP ST - M - ZN 6 HRL 6 AP ST - M - ZN 7 HRL 7 AP ST - M - ZN 8 TM = C-Rail Nut 0 HRL 0-6 TM6 ST BL 1 HRL 0-6 TM6 ST BL 2 HRL 0-6 TM6 ST BL 3 HRL 0-6 TM6 ST BL 4 HRL 0-6 TM6 ST BL 5 HRL 0-6 TM6 ST BL 6 HRL 0-6 TM6 ST BL 4 HRL = Sefety Plate 1 HRL 0-6 SIP ST ZN 2 HRL 0-6 SIP ST ZN 3 HRL 0-6 SIP ST ZN 4 HRL 0-6 SIP ST ZN 5 HRL 0-6 SIP ST ZN 6 HRL 0-6 SIP ST ZN TS = C-Rail 39 HRL TS 28x11 ST BL 1M 78 HRL TS 28x11 ST BL 2M KP = Clamp Pair 5 Contact Factory for Stainless Steel Component Model Codes Model Code: HRL 1 KP 10 PP 0 to 6 (refer to table A, page 5) Clamp Pair Bore (in mm) (refer to table A, page 5) PP - Polypropylene AL - Aluminum 14

14 hose, tube & clamp B/W pages 24/6/08 9:28 AM Page 15 Heavy Duty Clamps: Parts Hex Head Bolt 1 HRS 1 ASKT - M10 x 45 2 HRS 2 ASKT - M10 x 60 3 HRS 3 ASKT - M10 x 70 4 HRS 4 ASKT - M12 x HRS 5 ASKT - M16 x HRS 6 ASKT - M20 x HRS 7 ASKT - M24 x HRS 8 ASKT - M30 x 300 DP = Top Plate 1 HRS 1 DP ST ZN 2 HRS 2 DP ST ZN 3 HRS 3 DP ST ZN 4 HRS 4 DP ST ZN 5 HRS 5 DP ST BL 6 HRS 6 DP ST BL 7 HRS 7 DP ST BL 8 HRS 8 DP ST BL AP = Weld Plate 1 HRS 1 AP ST BL 2 HRS 2 AP ST BL 3 HRS 3 AP ST BL 4 HRS 4 AP ST BL 5 HRS 5 AP ST BL 6 HRS 6 AP ST BL 7 HRS 7 AP ST BL 8 HRS 8 AP ST BL SIP = Safety Plate 1 HRS 1 SIP ST ZN 2 HRS 2 SIP ST ZN 3 HRS 3 SIP ST ZN 4 HRS 4 SIP ST ZN 5 HRS 5 SIP ST ZN AF = Stacking Bolt w/ Washer 1 HRS 1 AF ST M10 2 HRS 2 AF ST M10 3 HRS 3 AF ST M10 4 HRS 4 AF ST M12 5 HRS 5 AF ST M16 TM = C-Rail Nut 2 HRS 1-3 TM10 ST ZN 3 HRS 1-3 TM10 ST ZN 4 HRS 4 TM12 ST ZN DDP = Double Top Plate 1 HRS 1 DDP ST ZN 2 HRS 2 DDP ST ZN 3 HRS 3 DDP ST ZN 4 HRS 4 DDP ST ZN 5 HRS 5 DDP ST ZN 6 HRS 6 DDP ST ZN 7 HRS 7 DDP ST ZN DAP = Double Weld Plate 1 HRS 1 DAP ST ZN 2 HRS 2 DAP ST ZN 3 HRS 3 DAP ST ZN 4 HRS 4 DAP ST ZN 5 HRS 5 DAP ST ZN 6 HRS 6 DAP ST ZN 7 HRS 7 DAP ST ZN TS = C-Rail 39 HRS TS 40x22 ST BL 1M 78 HRS TS 40x22 ST BL 2M KP = Clamp Pair 5 Contact Factory for Stainless Steel Component Model Codes Model Code: HRS 1 KP 12.7 PP 1 to 8 (refer to table B, page 6) Clamp Pair Bore (in mm) (refer to table B, page 6) PP - Polypropylene AL - Aluminum 15

15 hose, tube & clamp B/W pages 24/6/08 9:28 AM Page 16 Twin Clamps: Parts Hex Head Bolt 1 HRZ 1 - ASKT - M6 x 35 2 HRZ 2 - ASKT - M8 x 35 3 HRZ 3 - ASKT - M8 x 45 4 HRZ 4 - ASKT - M8 x 50 5 HRZ 5 - ASKT - M8 x 60 DP = Top Plate 1 HRZ 1 DP ST ZN 2 HRZ 2 DP ST ZN 3 HRZ 3 DP ST ZN 4 HRZ 4 DP ST ZN 5 HRZ 5 DP ST BL AP = Weld Plate 1 HRZ 1 AP ST ZN 2 HRZ 2 AP ST ZN 3 HRZ 3 AP ST ZN 4 HRZ 4 AP ST ZN 5 HRZ 5 AP ST ZN 6 7 AF = Stacking Bolt w/ Washer 1 HRZ 1 AF 6 ST ZN 2 HRZ 2 AF 8 ST ZN 3 HRZ 3 AF 8 ST ZN 4 HRZ 2 AF 8 ST ZN 5 HRZ 2 AF 8 ST ZN TM = C-Rail Nut 1 HRZ 1 TM6 ST 2 HRZ 2/5 TM8 ST 3 HRZ 2/5 TM8 ST 4 HRZ 2/5 TM8 ST 5 HRZ 2/5 TM8 ST 4 SIP = Safety Plate 1 HRZ 1 SIP ST ZN 2 HRZ 2/5 SIP ST ZN 3 HRZ 2/5 SIP ST ZN 4 HRZ 2/5 SIP ST ZN 5 HRZ 2/5 SIP ST ZN TS = C-Rail 39 HRS TS 28x11 ST BL 1M 78 HRS TS 28x11 ST BL 2M Contact Factory for Stainless Steel Component Model Codes KP = Clamp Pair 5 Model Code: HRZ 1 KP PP 0 to 5 (refer to table C, page 9) Clamp Pair Bore (in mm) (refer to table C, page 9) PP - Polypropylene 16

16 hose, tube & clamp B/W pages 24/6/08 9:28 AM Page 17 Standard Duty Clamps with Rubber Inserts: Parts 1 Hex Head Bolt 4 HRL 4 - ASKT - M6 x 45 6 HRL 6 - ASKT - M6 x 70 7 AF = Stacking Bolt 4 HRL 4 AF 6 ST ZN 6 HRL 6 AF 6 ST ZN 2 DP = Top Plate 4 HRL 4 DP ST ZN 6 HRL 6 DP ST ZN 3 AP = Weld Plate 4 HRL 4 AP ST M ZN 6 HRL 6 AP ST M ZN 8 TM = C-Rail Nut 4 HRL 0-6 TM 6 ST M ZN 6 HRL 0-6 TM 6 ST M ZN 4 HRL = Safety Plate 1 HRL 0-6 SIP ST ZN 2 HRL 0-6 SIP ST ZN 3 HRL 0-6 SIP ST ZN 4 HRL 0-6 SIP ST ZN 5 HRL 0-6 SIP ST ZN 6 HRL 0-6 SIP ST ZN TS = C-Rail 39 HRL TS 28x11 ST BL 1M 78 HRL TS 28x11 ST BL 2M KP = Clamp Pair Contact Factory for Stainless Steel Component Model Codes EE = Rubber Insert 5 6 Model Code: HRL 4 KP PP 4, 6 (refer to table D, page 11) Clamp Pair PP - Polypropylene Model Code: HREL 2/4 L EE 12 2/4 L, 3/6 L (refer to table D, page 11) Rubber Insert Bore (in mm) (refer to table D, page 11) 17

17 hose, tube & clamp B/W pages 24/6/08 9:28 AM Page 18 Heavy Duty Clamps with Rubber Inserts: Parts 1 Hex Head Bolt 1 HRS 1 ASKT - M10 x 45 2 HRS 2 ASKT - M10 x 60 3 HRS 3 ASKT - M10 x 70 4 HRS 4 ASKT - M12 x HRS 5 ASKT - M16 x HRS 6 ASKT - M20 x HRS 7 ASKT - M24 x AF = Stacking Bolt w/ Washer 1-3 HRS 1/3 AF 10 ST 4 HRS 4 AF 12 ST 5 HRS 5 AF 16 ST 6 HRS 6 AF 20 ST 7 HRS 7 AF 24 ST 2 DP = Top Plate 2 HRS 2 DP ST ZN 3 HRS 3 DP ST ZN 4 HRS 4 DP ST ZN 5 HRS 5 DP ST BL 6 HRS 6 DP ST BL 7 HRS 7 DP ST BL 8 TM = C-Rail Nut 1/3 HRS 1-3 TM 10 ST BL 4 HRS 4 TM 12 ST BL 3 AP = Weld Plate 2 HRS 2 AP ST BL 3 HRS 3 AP ST BL 4 HRS 4 AP ST BL 5 HRS 5 AP ST BL 6 HRS 6 AP ST BL 7 HRS 7 AP ST BL TS = C-Rail 39 HRS TS 40x22 ST ML 1M 78 HRS TS 40x22 ST ML 2M 4 SIP = Safety Plate 2 HRS 2 SIP ST ZN 3 HRS 3 SIP ST ZN Contact Factory for Stainless Steel Component Model Codes KP = Clamp Pair EE = Rubber Insert 5 6 Model Code: HRES 4 KP PP 2 to 7 (refer to table E, page 13) Clamp Pair PP - Polypropylene Model Code: HRES 4 EE /4 L to 7 (refer to table E, page 13) Rubber Insert Bore (in mm) 18

18 hose, tube & clamp B/W pages 24/6/08 9:28 AM Page 19 Technical Specifications: Recommended Distance Between Clamps Pipe Distance Tube Distance 1/4 4 1/16 3 1/2 4 1/8 3 3/4 5 1/ / /4 7 1/ /2 8 5/ / /2 10 7/ / / / Properties of Materials (clamp pairs) Polypropylene PP Polyamide PA Aluminum AL Mechanical Properties Tensile Strength 4200 psi psi Flexural Yield Strength 7600 psi psi Impact Strength No Failure No Failure (Izod Method) Tensile Test 2800 psi Brinell Hardness Number 60 BHN Modules of Elasticity Resistant to most aqueous solutions of inorganic salts, minerals, and organic acids, even at high temperatures. Resistant to organic solvents, dilute acids, and bases. Resistant to radiation. 9.7 x x 106 psi Thermal Properties Continuous Service -22 to 194 F -40 to 284 F -67 to 500 F Temperature Range -30 to 90 C -40 to 140 C -55 to 260 C Electrical Properties Volume Resistivity 1018 Ohm-cm 1015 Ohm-cm Chemical Properties Chemical Resistance Resistant to neutral and sea water, organic acids, esters, oils, and inorganic salt solutions. 19

HOSE, TUBE, AND PIPE CLAMPS

HOSE, TUBE, AND PIPE CLAMPS HOSE, TUBE, AND PIPE CLAMPS HOSE, TUBE, AND PIPE CLAMPS TABLE OF CONTENTS Introduction 3 Construction 3 Application 3 Mounting 3 Standard Duty Clamps (HRL) Arrangements 4 Dimensions 5 Heavy Duty Clamps

More information

LAMPS CLAMPS INFORMATION GENERAL. General Information 207 HYDRAULIC PIPES BAR SAE 50 BAR SAE 3000 PSI DIN BAR SCHEDULE SERIE

LAMPS CLAMPS INFORMATION GENERAL. General Information 207 HYDRAULIC PIPES BAR SAE 50 BAR SAE 3000 PSI DIN BAR SCHEDULE SERIE GENERAL Product Page HYDRAULIC PIPES 10-40 BAR SAE 50 BAR SAE 3000 PSI DIN 350-400 BAR SCHEDULE SERIE SAE 3000 PSI General Information 207 Installation and Assembly 210 Standard Series Components 212 Standard

More information

ParKlamp Inch Tube Clamps

ParKlamp Inch Tube Clamps ParKlamp Inch Tube Clamps O Standard Series Clamp Halves CP Cover Plate BCP Hexagon Head Bolt for Cover Plate IPS Insert BIP Hexagon Head Bolt for Insert P ocking Plate SB Stacking Bolt O6 WP Weld Plate

More information

SERIES ASM NEOPRENE/EPMD FLANGED SINGLE SPHERE CONNECTOR CONNECTORS. Pressures to 225 PSIG (15.51 barg) Temperatures to 230ºF (110ºC)

SERIES ASM NEOPRENE/EPMD FLANGED SINGLE SPHERE CONNECTOR CONNECTORS. Pressures to 225 PSIG (15.51 barg) Temperatures to 230ºF (110ºC) APPLICATIONS Process Industry Weak Acids Alkalies Compressed Air Pulp & Paper MODELS ASM - Flanged Connection OPTIONS Control Rods Oil & Gas Water & Waste Pump suction & discharge Sea water Chemical lines

More information

GS-HYDRO CLAMPS REVISION FEBRUARY 2016

GS-HYDRO CLAMPS REVISION FEBRUARY 2016 GS-HYDRO CLAMPS REVISION FEBRUARY 2016 General Information GS-Hydro distributes the market leading Clamp solutions. Application of these clamps are almost unlimited, far beyond mere pipe support. Please

More information

Stainless Steel Seamless Tubing and Tube Support Systems

Stainless Steel Seamless Tubing and Tube Support Systems www.swagelok.com Stainless Steel Seamless Tubing and Fractional, Metric, and Imperial Sizes 316 / 316L and 304 / 304L stainless steel Standard instrumentation tubing 1/8 to 2 and 3 to 25 mm sizes Marked

More information

PIPE CLAMPS 5:70 5:70 PRODUCT CATALOGUE 241

PIPE CLAMPS 5:70 5:70 PRODUCT CATALOGUE 241 PIPE CLAMPS PRODUCT CATALOGUE 241 HYDROSCAND PIPE CLAMPS Hydroscand s pipe clamps are designed as attaching elements for pipes and hoses. Using a Hydroscand clamp when assembling pipes and pipe groups,

More information

Tube Supports. Pipe, tube, and hose supports. 1/4 to 1 in. and 6 to 25 mm outside diameter

Tube Supports.  Pipe, tube, and hose supports. 1/4 to 1 in. and 6 to 25 mm outside diameter www.swagelok.com Tube Supports Pipe, tube, and hose supports 1/4 to 1 in. and 6 to 25 mm outside diameter 316 stainless steel, carbon steel, and polypropylene Wall- and channel-mounted options Single and

More information

Cushion Clamp Assemblies & Insulation Coupling Systems

Cushion Clamp Assemblies & Insulation Coupling Systems Cushion Clamp Assemblies & Insulation Coupling Systems 1 Hydra-Zorb Strut Mounted Clamps [ page 2 ] Klo-Shure Insulation Couplings [ page 9 ] 2 Hydra-Zorb Co. has been the leader in the strut mounted clamp

More information

Pipe threads for tubes and fittings where pressure-tight joints are not made on the threads. (requires PTFE sealing tape or liquid sealant).

Pipe threads for tubes and fittings where pressure-tight joints are not made on the threads. (requires PTFE sealing tape or liquid sealant). Fittings for CO 2 Pipe Threads Pipe thread references quoted in this catalogue conform with the requirements specified in the latest issue and amendments of the following ISO Standards: ISO 7-1 (BS21)

More information

Standard-Duty and Heavy-Duty Tube and Pipe Clamps

Standard-Duty and Heavy-Duty Tube and Pipe Clamps Standard-Duty and Heavy-Duty Tube and Pipe Clamps Table Of Contents Evolution of Clamps... 2 Tubing vs. Piping Difference/Comparison... 3 Features/Benefits of Clamps...4-5 Standard-Duty (Light-Duty) Clamps...6-7

More information

CONTROLS. Series 92/93 Pneumatic Actuators. Technical Manual. A Division of BRAY INTERNATIONAL, Inc.

CONTROLS. Series 92/93 Pneumatic Actuators. Technical Manual. A Division of BRAY INTERNATIONAL, Inc. CONTROLS A Division of BRAY INTERNATIONAL, Inc. Series 92/93 Technical Manual TM-1056 Pneumatic Actuator - 06/20/2014 Bray Series 92/93 Technical Manual - Table of Contents Topic...Page(s) Actuator Installation

More information

Stauff ACT (anti-corrosion technology) Clamp Brochure

Stauff ACT (anti-corrosion technology) Clamp Brochure Hydraulic & Offshore Supplies Stauff ACT (anti-corrosion technology) Clamp Brochure YOUR GATEWAY TO GLOBAL SUPPLY HOSE ASSEMBLIES PRESSURE TESTING WALFORM EQUIPMENT PACKAGES FLANGES PIPE & TUBE ... the

More information

Pi.Effe.Ci. Over 40 years of experience

Pi.Effe.Ci. Over 40 years of experience CLAMP Pi.Effe.Ci. Over 40 years of experience offers its clients over 40 years experience in the market of TUE FITTING CLAMP to fix the pipes, used in many industries. A productive capacity characterized

More information

ATEX 94/9/EC SIL3 IEC GOST-R TYPE APPROVAL

ATEX 94/9/EC SIL3 IEC GOST-R TYPE APPROVAL ATEX 94/9/EC SIL3 IEC 61508 GOST-R TYPE APPROVAL 95 90 75 Stroke 15 0 4. Universal and anti-blowout drive shaft It permits an easy conversion from parallel to diagonal square and vice versa. It is also

More information

4. Combi valves. 7. Fire hydrants. 8. Check valves. 9. Air valves

4. Combi valves. 7. Fire hydrants. 8. Check valves. 9. Air valves 1. General company and product information 2. Flanged gate valves for water 3. Other gate valves for water 4. Combi valves 5. Service connection valves for water 6. Valves and fittings for gas 7. Fire

More information

RING JOINT SYSTEMS 207

RING JOINT SYSTEMS 207 RING JOINT SYSTEMS 07 08 Table of Contents Model R-88 Pages 10-11 Model R-88 Large Diameter Page 1 Model RH-1000 1000 PSI Coupling Page 13 Model RX-3000 3000 PSI Coupling Page 1 Model RX-3770 3770 PSI

More information

FLUTEC Pressure Relief Valves

FLUTEC Pressure Relief Valves FLUTEC Pressure Relief Valves Pressure Relief DB4E 1.1. up to 630 bar up to 30 l/min Connection housings 2 1. DESCRIPTION 1.1. GENERAL According to DIN -ISO 1219, DB4E are valves for oil hydraulic systems

More information

Fluid Level Gauge Fluid Level Sensor Temperature Switch FSA / FSK / TS

Fluid Level Gauge Fluid Level Sensor Temperature Switch FSA / FSK / TS Fluid Level Gauge Fluid Level Sensor Temperature Switch FSA / FSK / TS up to size 381; to PN 0.5; to T = 80 C 1. Description 1.1. General FSA fluid level gauges, FSK fluid level sensors and TS temperature

More information

BIS Metal Pipe Clamps with Lining

BIS Metal Pipe Clamps with Lining A BIS Metal Pipe Clamps with Lining BIS Clamps BISMAT Flash BISMAT 2000 Ø ¼ - 2" BISMAT 2000 Ø 2½ - 4" 2 3 4 BIS Industrial Clamps BIS Heavy Duty Clamps HD1501 (1/2") (BUP1000) 5 BIS Clamps for Plastic

More information

Gas Distribution and Transportation

Gas Distribution and Transportation Piping System Includes: Pipe Fittings (e.g. elbows, reducers, branch connections, etc.) Flanges, gaskets, bolting Valves Associations involved in generating Codes for piping Design Engineering: ASME ANSI

More information

Guide rail bracket (for adjustable heads)

Guide rail bracket (for adjustable heads) (for adjustable heads) Part. 209 40 ø,5 ø10,5 2 2,5 115 15 42 5 11 37 72 4 70 Code 209 / 0754 MATERIALS: Bracket made out of reinforced polyamide black colour. FEATURES: To be used with heads Part.221,

More information

08.08 Vic-Check Valves

08.08 Vic-Check Valves The check valves are a product of computer-assisted innovative engineering with quality features including a new hydrodynamically efficient profile. The Vic-Check valve utilizes a spring-assisted, single-disc

More information

Pneumatic Applications

Pneumatic Applications Pneumatic s 800-333-493 Pneumatic Control System with separate installation of cables and hoses with conduits 80x40. 15 Pneumatic Profiles 800-333-493 Profiles can be used as support structure and compressed-air

More information

Stainless Steel Valves For the Sanitary Industries

Stainless Steel Valves For the Sanitary Industries www.swagelok.com Stainless Steel Valves For the Sanitary Industries Sanitary ball valves Manual and pneumatically actuated butterfly valves Disk and ball check valves ir blow check valves ir relief valves

More information

PIPE & CONDUIT CLAMPS

PIPE & CONDUIT CLAMPS PIPE & ONDUIT LMPS Power-Strut pipe, conduit and tubing clamps are formed in punch press dies in a wide selection of sizes to meet every requirement. MTERIL: Power-Strut pipe, conduit and tubing clamps

More information

Hose Clamps & Fittings

Hose Clamps & Fittings All Stainless Steel Marine or Underground Hose Clamps 5/16 HEX HEAD SCREW 60000 SERIES Highly corrosion resistant Use for marine or underground applications Stainless Steel Band, Housing Plated Steel Screw

More information

CL SERIES. Heavy-Duty Clamp Pneumatic & Hydraulic Cylinders. Pressure Rating: CLA-150 PSI Pneumatic CLH-250 PSI Pneumatic CLH-1,500 PSI Hydraulic

CL SERIES. Heavy-Duty Clamp Pneumatic & Hydraulic Cylinders. Pressure Rating: CLA-150 PSI Pneumatic CLH-250 PSI Pneumatic CLH-1,500 PSI Hydraulic CL SERIES Heavy-Duty Clamp Pneumatic & Hydraulic Cylinders Pressure Rating: CLA-50 PSI Pneumatic CLH-250 PSI Pneumatic CLH-,500 PSI Hydraulic Construction CLA /4" AND /8" BORES & CLH /8" BORE ONLY CLA

More information

Hydraulic Accumulators with Back-Up. Nitrogen bottle

Hydraulic Accumulators with Back-Up. Nitrogen bottle Hydraulic Accumulators with Back-Up Nitrogen Bottles 1. GENERAL To complete the range, HYDAC provides a variety of useful accessory products. They guarantee correct installation and optimum functioning

More information

V-BAND CLAMPS/COUPLINGS

V-BAND CLAMPS/COUPLINGS V-BAND CLAMPS/COUPLINGS Made-to-Order Clampco V-Band Couplings, also known as V-Band Clamps or V-Clamps, join flanges with V-shaped profiles. A V-Band Coupling operates by exerting a wedging load, which

More information

Scraper Passage Indicator. Electrical Indicator. Features

Scraper Passage Indicator. Electrical Indicator. Features IV Scraper Passage Indicator Bulletin No: 5110.001.03 Date: June 2008 Cross Indexing No: n/a Supersedes: 5110.001.02 (1/06) Flag Indicator Electrical Indicator Options Description TDW s IV Scraper Passage

More information

HYDRAULIC PIPING STANDARD HANDBOOK. Revision 1

HYDRAULIC PIPING STANDARD HANDBOOK. Revision 1 HYDRAULIC PIPING STANDARD HANDBOOK Revision 1 Preface We aim to fill a gap in technical literature. At this moment there are no hydraulic piping standards available which cover different pressure classes

More information

MICRO PLASTICS MOLDED NYLON 6/6 FASTENERS MECHANICAL TEST DATA - UNC - UNF SECTION

MICRO PLASTICS MOLDED NYLON 6/6 FASTENERS MECHANICAL TEST DATA - UNC - UNF SECTION MICRO PLASTICS MOLDED NYLON 6/6 FASTENERS MECHANICAL TEST DATA - UNC - UNF Nylon 6/6 meets MIL-M20693B "A" Type 1, LP410A, and ASTM D789-66 Type 1, GDE 2 All test performed per ASTM specifications. Parts

More information

These specifications shall apply to all high strength bolts and anchor bolts.

These specifications shall apply to all high strength bolts and anchor bolts. BOLTS (New Section) 972 972.1 REQUIREMENTS These specifications shall apply to all high strength bolts and anchor bolts. 972.2 SPECIFIC REQUIREMENTS A. General: All bolts, nuts, and washers shall have

More information

PUSH-PULL CABLES CONTROL SYSTEMS

PUSH-PULL CABLES CONTROL SYSTEMS ISO 9001 CERTIFIED PUSH-PULL CABLES CONTROL SYSTEMS WESCON PRODUCTS COMPANY A subsidiary of LATSHAW ENTERPRISES, INC. WESCON'S PUSH-PULL CONTROL SYSTEMS Push-Pull Cable Ends Wescon Push-Pull Cable Assemblies

More information

Hose and Tube Fittings Series 1-3

Hose and Tube Fittings Series 1-3 Embracing Challenge Hose and Tube Fittings Series 1-3 out of plastics PP, PVDF, PTFE Series 1 Special Features Corrosion resistant Gas tight Easy to handle Different connection threads Application Hose

More information

PPS-PPQ-BT-PIAS RESIN INSULATORS FOR OIL INSULATED ELECTRICAL MACHINES

PPS-PPQ-BT-PIAS RESIN INSULATORS FOR OIL INSULATED ELECTRICAL MACHINES PPS-PPQ-BT-PIAS RESIN INSULATORS FOR OIL INSULATED ELECTRICAL MACHINES BUSHING WITH PLUG CONNECTION WITH OUTER CONE PPS CHARACTERISTICS The PPS bushing can be used as a fixed section for the entry of medium

More information

NEW SIX-SEALS CUTTING RING. INTERNATIONAL INDUSTRIAL PATENT Nr. 864061 of the 10/03/99 FLANKS AND DOES NOT REPLACE THE STANDARD RING CURRENTLY IN USE

NEW SIX-SEALS CUTTING RING. INTERNATIONAL INDUSTRIAL PATENT Nr. 864061 of the 10/03/99 FLANKS AND DOES NOT REPLACE THE STANDARD RING CURRENTLY IN USE B4 NEW SIX-SEALS CUTTING RING. INTERNATIONAL INDUSTRIAL PATENT Nr. 864061 of the 10/03/99 FLANKS AND DOES NOT REPLACE THE STANDARD RING CURRENTLY IN USE AVAILABLE IN CARBON AND STAINLESS STEEL 23 THEORY

More information

Piston Accumulators. SK Series. Accumulator Catalog. Piston Types. Description. Sealing Systems. End Cap. O-ring. Sealing System. Piston.

Piston Accumulators. SK Series. Accumulator Catalog. Piston Types. Description. Sealing Systems. End Cap. O-ring. Sealing System. Piston. SK Series Piston Types TYPE 2 pplication: Low-friction design for higher piston speeds, slow movements without stick-slip effect and high number of actuations (millions). ctual cycles achieved will vary

More information

Two most common lock nut groups: 1-Prevailing Torque Type Lock Nuts:

Two most common lock nut groups: 1-Prevailing Torque Type Lock Nuts: Two most common lock nut groups: 1. PREVAILING TORQUE a design feature of the lock nut produces friction between threads of mated components thereby increasing the force needed to tighten as well as loosen

More information

SITRANS F flowmeters SITRANS F M

SITRANS F flowmeters SITRANS F M Overview Integration The complete flowmeter consists of a flow sensor and an associated transmitter MAG 5000, 6000 or 6000 I. The flexible communication concept USM II simplifies integration and update

More information

PR*SP - PR*SPU - PILOT OPERATED PRESSURE RELIEF VALVE SERIES

PR*SP - PR*SPU - PILOT OPERATED PRESSURE RELIEF VALVE SERIES CONTINENTAL HYDRAULICS PR*SP - PR*SPU PILOT OPERATED PRESSURE RELIEF VALVE SERIES 5505 WEST 123RD STREET SAVAGE, MN 55378-1299 / PH: 952.895.6400 / WWW.CONTINENTALHYDRAULICS.COM POWERFUL PR*SP - PR*SPU

More information

Pipe, Tube and Hose Clamps MADE IN ITALY

Pipe, Tube and Hose Clamps MADE IN ITALY Pipe, Tube and Hose Clamps MADE IN ITALY 06.20 R Clamps INDEX Standard Series Bodies... Standard Series s... Twin Series Bodies... 7 Twin Series s... 8 Heavy Series Bodies... Heavy Series s... Material

More information

Marman Standard Tube Size and Variable Diameter V-Band Couplings. Simplified Stock Long Life Vibration Proof Numerous Sizes Corrosion Resistant

Marman Standard Tube Size and Variable Diameter V-Band Couplings. Simplified Stock Long Life Vibration Proof Numerous Sizes Corrosion Resistant Marman Standard Tube Size and Variable Diameter V-Band Couplings Simplified Stock Long Life Vibration Proof Numerous Sizes Corrosion Resistant V-Band Couplings Standard Tube Size and Variable Diameter

More information

31000 and Proximity Probe Housings Bently Nevada* Asset Condition Monitoring

31000 and Proximity Probe Housings Bently Nevada* Asset Condition Monitoring 31000 and 32000 Proximity Probe Housings Bently Nevada* Asset Condition Monitoring Description The 31000/32000 Proximity Probe Housing Assemblies are recommended when mounting proximity probes through

More information

Seals. Use Genuine Dexter replacement parts.

Seals. Use Genuine Dexter replacement parts. Seals K71302Seal K71-301-00 Seal Fits Dexter 10 x 1-1/2" hub. 1.75 ID x 2.33 OD. Fits Dexter 7" hub. 1.50 ID x 1.987 OD. K71-303-00 Seal K71-304-00 Seal Fits Dexter 10 x 2-1/4" hub. 1.72 ID x 2.565 OD.

More information

600, 630. Diaphragm Valve, Plastic

600, 630. Diaphragm Valve, Plastic Diaphragm Valve, Plastic Construction The /630 pneumatically operated 2/2-way valves have a low maintenance piston actuator which can be controlled by inert gaseous media. They have an integral optical

More information

Exclusive Glass Door Hardware by Izerwaren.Com

Exclusive Glass Door Hardware by Izerwaren.Com Exclusive Glass Door Hardware by Izerwaren.Com BRASS PLATED GLASS DOOR LATCHES for 3/8 to 1/2 inch thick glass 316 STAINLESS STEEL GLASS DOOR HINGES for 3/8 to 1/2 inch thick glass Wall to glass hinge

More information

4 Posiflow Proportional Solenoid Valves

4 Posiflow Proportional Solenoid Valves 4 Posiflow Solenoid Brass or Stainless Steel Bodies 1/4" to 1/2" NPT 2/2 Features Flow rates adjustable between 0% and 100% of rating Flow rate can also be regulated by a range of electrical inputs (sensors,

More information

VSNG6 SOLENOID OPERATED DIRECTIONAL CONTROL VALVE COMPACT SIZE

VSNG6 SOLENOID OPERATED DIRECTIONAL CONTROL VALVE COMPACT SIZE VSNG6 SOLENOID OPERATED DIRECTIONAL CONTROL VALVE COMPACT SIZE NFPA D03 MOUNTING INTERFACE ISO 4401-03-02-0-94 (CETOP 4.2-4-03-250) SUBPLATE MOUNTING NFPA D03 ISO 4401-03 (CETOP 03) NG6 Pressure max 4060

More information

Working Pressure up to 630 bar / 9135 PSI

Working Pressure up to 630 bar / 9135 PSI Test Hoses SMS / SS + Working Pressure up to 630 bar / 9135 PSI Technical Data for Test Hose A B C D Nominal Bore () (mm) Max. Working Pressure (PN) (bar / PSI) 00 / 5801 630 / 9135 30 / 931 630 / 9135

More information

Accessories for GF and RA machines

Accessories for GF and RA machines Orbital cutting & beveling machines for high-purity process piping www.orbitalum.com Accessories for GF and RA machines A brand of ITW Orbital Cutting & Welding 23 www.orbitalum.com Orbital cutting & beveling

More information

WITCHLINER Isolation Products For Stainless Steel and Cupro-Nickel Pipes Introduction

WITCHLINER Isolation Products For Stainless Steel and Cupro-Nickel Pipes Introduction 04/10 133 WITCHLINER Isolation Products Introduction Principal Benefits Clamping damage restraint to thin wall pipes Principal Benefits Prevention of electrolytic erosion between Clamping damage restraint

More information

Local Solutions For Individual Customers Worldwide. Corrosion Innovation of the Year Award. STAUFF ACT Clamp Anti-Corrosion Technology

Local Solutions For Individual Customers Worldwide. Corrosion Innovation of the Year Award. STAUFF ACT Clamp Anti-Corrosion Technology Local Solutions For Individual Customers Worldwide 2012 Winner of the Corrosion Innovation of the Year Award STAUFF ACT Clamp Anti-Corrosion Technology Product Catalogue The Issue: Pipework Corrosion Corrosion

More information

POWERS Controls No. 4 Pneumatic Damper Actuator

POWERS Controls No. 4 Pneumatic Damper Actuator POWERS Controls No. 4 Pneumatic Damper Actuator Technical Instructions Document No. 155-032P25 AP 331-2 Actuator Assembly 331-2929 Typical Actuator Assembly 331-2904 Typical Actuator Assembly 331-3000

More information

kymanual or Automatic - it s your Choice

kymanual or Automatic - it s your Choice . kymanual or Automatic - it s your Choice ky LKB Automatic or Manual Butterfly Valve Application LKB is a sanitary automatically or manually operated butterfly valve for use in stainless steel pipe systems.

More information

Hydraulic Accumulators with Back-Up. Nitrogen bottle

Hydraulic Accumulators with Back-Up. Nitrogen bottle Hydraulic Accumulators with Back-Up Nitrogen Bottles 1. GENERAL To complete the range, HYDAC provides a variety of useful accessory products. They guarantee correct installation and optimum functioning

More information

Toroidal Conductivity Sensor

Toroidal Conductivity Sensor Instruction Sheet PN 51A-/rev.C June 2012 Toroidal Conductivity Sensor For additional information, please visit our website at www.emersonprocess.com/rosemountanalytical.com SPECIFICATIONS Wetted Materials:

More information

FITTINGS 5-01. 82A series Aluminium (light weight) compression fittings Ø 6... 42 mm tube size, BSPP and BSPT thread

FITTINGS 5-01. 82A series Aluminium (light weight) compression fittings Ø 6... 42 mm tube size, BSPP and BSPT thread FITTINS 82 series luminium (light weight) compression fittings Ø 6... 42 mm tube size, SPP and SPT thread 82 series rass compression fittings Ø 6... 42 mm tube size, SPP and SPT thread 83 series luminium

More information

Section 4: NiResist Iron

Section 4: NiResist Iron Section 4: NiResist Iron Section 4 Ni-Resist Description of Grades...4-2 201 (Type 1) Ni-Resist...4-3 202 (Type 2) Ni-Resist...4-6 Stock Listings...4-8 4-1 Ni-Resist Description of Grades Ni-Resist Dura-Bar

More information

Metric System & Specifications

Metric System & Specifications Metric System & Specifications Throughout history, people have been trying to limit the number of measurement systems. Today, only two systems, inch-pound and metric, are predominate in most industrial

More information

Generator Wheel Kit C. Assembly Instructions; (for generator models G7301R & G12000R)

Generator Wheel Kit C. Assembly Instructions; (for generator models G7301R & G12000R) Generator Wheel Kit 110004-C Assembly Instructions (for generator models G7301R & G12000R) WARNING Assembly Instructions; Read and follow all cautions, warnings and instructions in the Generator or Water

More information

Spectifications. ANSI (American National Standard Institute) / ASME (American Society of Mechanical Engineers)

Spectifications. ANSI (American National Standard Institute) / ASME (American Society of Mechanical Engineers) Spectifications ANSI (American National Standard Institute) / ASME (American Society of Mechanical Engineers) ANSI / ASME B1.20.1 ASME B16.10 ASME B16.11 ASME B16.25 ANSI / ASME B16.28 ANSI / ASME B16.34

More information

Pipe Cutting and Beveling Machines LCSF. Externally mounted portable pipe cutting and beveling system.

Pipe Cutting and Beveling Machines LCSF. Externally mounted portable pipe cutting and beveling system. Externally mounted portable pipe cutting and beveling system. Optional "Bridge Slide" for heavy wall pipe. Bevel, compound bevel and J prep. All "Low Clearance Split Frames" are designed for portability

More information

Karbon Kitchen Sink Tap

Karbon Kitchen Sink Tap K-6227A Karbon Kitchen Sink Tap Installation and User Guide INSTALLER: IMPORTANT This product manual is the property of the customer and must be retained with the product for maintenance and operational

More information

C O N V E Y O R C O M P O N E N T S C H A I N S B E L T S B E A R I N G S

C O N V E Y O R C O M P O N E N T S C H A I N S B E L T S B E A R I N G S C O N V E Y O R C O M P O N E N T S C H A I N S B E L T S B E A R I N G S January 2009 Issue 6 Valu Guide Brackets The Ultimate in Adjustability and Cost Savings Valu Guide brackets are part of a family

More information

Application Data Important Safety Information

Application Data Important Safety Information Application Data Important Safety Information Read this page before using any of the information in this catalog. This catalog is designed to be used as a guide in selecting the proper hose for the applications

More information

STAUFF Clamps have been successfully tested and approved by several international organisations, including:

STAUFF Clamps have been successfully tested and approved by several international organisations, including: A Clamps A Clamps In most industrial countries Clamps symbolise quick and easy pipe and hose installations as well as a clean distinct pipe layout. Clamps have been successfully tested and approved by

More information

Pressure Relief Valve, Direct Operated Model DBD (Series 1X)

Pressure Relief Valve, Direct Operated Model DBD (Series 1X) ressure Relief Valve, Direct Operated Model DBD (Series 1X) Sizes 6 to 30... 9150 SI (630 bar) 87 GM (330 L/min) RA 25 402/06.98 Replaces: 05.94 Direct operated, fast response pressure relief valve hree

More information

PIPING SYSTEM - ABRASIVE SLURRIES Engineering Standard Specification. 96 B. Riutta

PIPING SYSTEM - ABRASIVE SLURRIES Engineering Standard Specification. 96 B. Riutta PIPING SYSTEM - ABRASIVE SLURRIES Engineering Standard Specification Number: 3503-11.2.610 Rev. 2 Rubber Lined Steel Pipe and Fittings Mechanically Coupled Plain End Type System Issued Revised Approved

More information

Pipe Cutting and Beveling Clamshells

Pipe Cutting and Beveling Clamshells Pipe Cutting and Beveling Clamshells Who We Are One Company, Total Support, Complete Solutions For more than a century, Hydratight has provided world-class bolted joint solutions and continues to set international

More information

Sensors. Sensors. All Cylinders. Specifications. Features: Features Type REED HALL EFFECT NPN or PNP. Ø8mm - 125mm

Sensors. Sensors. All Cylinders. Specifications. Features: Features Type REED HALL EFFECT NPN or PNP. Ø8mm - 125mm Specifications Features Type REED HALL EFFECT NPN or PNP Applicable Series Configurations Construction Materials Body Mounting Bracket Cable Characteristics Operating Temperature Accuracy All Cylinders

More information

Steel Pipe and Tube. Section 12

Steel Pipe and Tube. Section 12 Section 12 Steel Pipe and Tube 12-1 INFORMATION - STEEL PIPE AND TUBE GENERAL INFORMATION Rigid hydraulic tubing offers intrinsic bene ts when installing uid transfer lines in both xed and mobile plant

More information

Section 7. Socket Weld and Threaded Fittings. Socket Weld and Threaded Fittings 7-1

Section 7. Socket Weld and Threaded Fittings. Socket Weld and Threaded Fittings 7-1 Section 7 Socket Weld and Threaded Fittings This Section contains dimension and tolerance information extracted from American and British specifications applicable to socket weld and threaded fittings.

More information

Electrical Accessories

Electrical Accessories Electrical ccessories Electrical ccessories complete system of top quality, time saving products, designed for surface metal raceways, lighting and cable supports. Innovative designs offer many installation

More information

TRAILER EQUIPMENT. Jockey Wheels & Clamps Fully Zinc Plated. MP431 MP432 MP433 MP435 MP9743 MP810 MP9745. Code No. with clamp. Code No.

TRAILER EQUIPMENT. Jockey Wheels & Clamps Fully Zinc Plated. MP431 MP432 MP433 MP435 MP9743 MP810 MP9745. Code No. with clamp. Code No. Jockey Wheels & Clamps Fully Zinc Plated. with clamp with clamp 1 480mm Deluxe sliding jockey wheel with 34mm Dia tube with red 1 plastic wheel and solid rubber tyre. Max. 75Kgs 1 5 min 790mm max Deluxe

More information

Technical Note PP 811-TN PE Flange Connections

Technical Note PP 811-TN PE Flange Connections Technical Note PP 811-TN PE Flange Connections Flange Connection Flanged joints are made using a DriscoPlex Flange Adapter that is fused to the pipe then joined to a mating flange adapter or a mating appurtenance

More information

E N G I N E E R E D V A L V E S GROVE. B4, B5 & B7 Side Entry Ball Valves GROVE

E N G I N E E R E D V A L V E S GROVE. B4, B5 & B7 Side Entry Ball Valves GROVE B4, B5 & B7 Side Entry Ball Valves TABLE OF CONTENTS B4, B5 & B7 SIDE ENTRY BALL VALVES FEATURES AND BENEFITS The Company 1 Applications 1 B4 Design Features 2 Material Specifications 4 Optional Features

More information

9013 PUMPTROL Commercial Pressure Switches Type F and 9013 Commercial Pressure Switches Type G. January. Catalog

9013 PUMPTROL Commercial Pressure Switches Type F and 9013 Commercial Pressure Switches Type G. January. Catalog 9013 PUMPTROL Commercial Pressure Switches Type F and 9013 Commercial Pressure Switches Type G Catalog January 07 Contents Commercial Pressure Switches Pressure Switches b Selection..............................................

More information

WHEEL ACCESSORY PRODUCT CATALOG

WHEEL ACCESSORY PRODUCT CATALOG WHEEL ACCESSORY PRODUCT CATALOG Why accessories for Alcoa Wheels? Maintaining your Alcoa Wheels in order to keep them in their best possible condition is and should be a top priority. Alcoa Accessory Products

More information

A Table of the Most Common Standard Pipe Sizes. Nominal Bore 1/2 inch (DN 15 mm), Outside Diameter 21.34 mm

A Table of the Most Common Standard Pipe Sizes. Nominal Bore 1/2 inch (DN 15 mm), Outside Diameter 21.34 mm Standard Pipe Sizes Standard Pipe Sizes Except for specialist applications, commercially available pipe comes in standard sizes. Pipes in a variety of materials - including carbon steel, steel alloys,

More information

Ductile Iron Pipe Couplings

Ductile Iron Pipe Couplings J-9 Pipe 1 2 Straight and Transition Ductile offer an easy and economical way of joining whether the is of the same nominal and/or type or different at each coupling. couplings will handle most of your

More information

Accumulators. Bladder, Piston, Diaphragm

Accumulators. Bladder, Piston, Diaphragm Accumulators Bladder, Piston, Diaphragm About HYDAC HYDAC stands for worldwide presence and accessibility to the customer. HYDAC has over 1000 distributors worldwide and more than 30 wholly owned branches.

More information

Mechanical Products. Mechanical Products M06-1

Mechanical Products. Mechanical Products M06-1 Products Products M06-1 3 TABLE OF CONTENTS 1. GENERAL DATA... 5 10 The Engineered Coupling...6 Features & Benefits...7 ISO 9001:2000 Certificate of Registration...8 Approvals...9 Manufacturing Process...10

More information

Rotary actuators Rotary wing drives Series RAK. Brochure

Rotary actuators Rotary wing drives Series RAK. Brochure Brochure 2 Rotary wing drives, angle of rotation: 30-270 Rotary wing drive, double-acting axis geometry: single 4 Rotary wing drives, angle of rotation: 90-270 Rotary wing drive, double-acting axis geometry:

More information

Pilot Operated Check Valves Model SV/SL (Series 4X)

Pilot Operated Check Valves Model SV/SL (Series 4X) R 68/06.98 Size 0 to 0 Pilot Operated Check Valves Model SV/SL (Series ) 600 PSI (5 bar)... 5 GPM (550 L/min) R 68/06.98 Replaces: 05.9 Pilot operated check valve, with leak-free closure in checked direction

More information

FIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES

FIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES BQ FIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES Versatility, power, compactness and low running costs are the main characteristics of B&C vane pumps. All the components subject to wear are contained

More information

FIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES

FIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES BQ FIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES Versatility, power, compactness and low running costs are the main characteristics of B&C vane pumps. All the components subject to wear are contained

More information

Rollers. from the UK s largest roller manufacturer. Quality Performance Reliability

Rollers. from the UK s largest roller manufacturer. Quality Performance Reliability Rollers from the UK s largest roller manufacturer Quality Performance Reliability 42 Index Gravity Rollers Light to Medium Duty 4 Heavy Duty 5 Plastic Rollers 6 Stainless Steel Rollers 7 Grooved Rollers

More information

Your temperature measurement in safe hands!

Your temperature measurement in safe hands! Temperature Sensors SIKA Temperature Sensors Your temperature measurement in safe hands! Content page Standard temperature sensors for industrial use............................... Temperature sensor (DIN

More information

before tightening the bolts. This will help eliminate the potential for any interference between the flywheel housing and the oil pan.

before tightening the bolts. This will help eliminate the potential for any interference between the flywheel housing and the oil pan. SERIES 60 SERVICE MANUAL before tightening the bolts. This will help eliminate the potential for any interference between the flywheel housing and the oil pan. 1. Drain Plug 6. Bolt 2. Nut 7. Plug 3. Isolator

More information

Rod End Bearings. Maintenance free, self lubricating. High strength under impact loads. High tensile strength. Compensation for alignment errors

Rod End Bearings. Maintenance free, self lubricating. High strength under impact loads. High tensile strength. Compensation for alignment errors igubal igubal Maintenance free, self lubricating mm High strength under impact loads High tensile strength inch Compensation for alignment errors Compensation for edge loads Lightweight 19.1 igubal igus

More information

BALL VALVE KPN-G FULL BORE, DN15 DN200, PN6, PN16, PN40** GAS DN25 DN50 DN65 DN100 DN125 DN200

BALL VALVE KPN-G FULL BORE, DN15 DN200, PN6, PN16, PN40** GAS DN25 DN50 DN65 DN100 DN125 DN200 BALL VALVE KPN-G FULL BORE, DN15 DN200, PN6, PN16, PN40** GAS DN25 DN50 DN65 DN100 DN125 DN200 1 Materials 1 Body Ductile Iron GGG40 2 Ball Stainless Steel A304 3 Stem Stainless Steel A304 4 Seats PTFE

More information

SUPPORT EQUIPMENTS 7 E 01-12

SUPPORT EQUIPMENTS 7 E 01-12 SUPPORT EQUPMENTS 7 E 0- CLAMPS type C 7. BRACKETS type MA and SUPPORT RNG type AG 7. U-BOLTS type U and PLASTC SADDLES type P 7. SNGLE ACCUMULATOR UNT type BAS 7.4 EPE TALANA s.r.l. - Viale Spagna, 009

More information

BIS Gulv / Radiator Beslag

BIS Gulv / Radiator Beslag O BIS Gulv / Radiator Beslag BIS Manifold Fixings BIS Manifold Fixing 2 BIS Pipe Protection BIS Protection Plate BIS Two-Part Floor Bend BIS Floor Bend BIS Bend Guider BIS Protective Pipe BIS PE Flexible

More information

Clamps. for Plastic Tubing & Hose. Fluid Transfer Specialists

Clamps. for Plastic Tubing & Hose. Fluid Transfer Specialists Clamps for Plastic Tubing & Hose Fluid Transfer Specialists Oetiker Clamps Ear Type Clamps Oetiker ear type clamps breathe and adapt to the expansion and contraction of hose affected by thermodynamics

More information

Flange Tables, Bolt Sizing and Gasket Materials

Flange Tables, Bolt Sizing and Gasket Materials fwb Tech & Download Content www.fwb.co.uk Flange Tables, Bolt Sizing and Gasket Materials V2.14 1 Contents Flange Identification. Page 3 Flange Type Codes. Page 3 Flange Face Types. Page 4 DN Explanation.

More information

WATER & SEWER CORROSIVE RESISTANT PRODUCTS

WATER & SEWER CORROSIVE RESISTANT PRODUCTS WATER & SEWER CORROSIVE RESISTANT PRODUCTS The Standard of Excellence in the Industry CASING SPACERS COUPLINGS & FLANGE COUPLING ADAPTERS REPAIR CLAMPS DUCTILE IRON SADDLES STAINLESS STEEL SADDLES TAPPING

More information

3M I/O Connector Mounting Options and Hardware

3M I/O Connector Mounting Options and Hardware M I/O Connector Mounting Options and Hardware Hardware Guide Date Modified: April 24, 2012 Part Number Type Mounting Hardware Applications - Table 1 Mini D Ribbon (MDR) Conn. s D Sub Conn. s D Ribbon Conn.

More information

BZP Tensile Class 8 Stainless Steel A2 Height (m) in mm A/F (sw) in mm Art. No.

BZP Tensile Class 8 Stainless Steel A2 Height (m) in mm A/F (sw) in mm Art. No. Hexagon Nuts Full nut with metric coarse thread. Available in the following materials: Steel, Bright Zinc Plated. Din 934-8 Steel, Self Colour. Din 934-10. Stainless Steel; A2-70. Din 934. Also available

More information