UTS discrete wire sealing

Transcription

1 Technical characteristics Mechanical Durability: 250 matings & unmatings Vibration resistance: Sinusoidal vibrations per CEI from 10 to 2000 Hz Thermal shock: 5 cycles 30 min. from -40 C to 105 C per MIL-STD1344 method 1003 Wire insulation: Ø from 1.7 to 3.0 mm Electrical Current per contact max.: Insulation resistance: Test potential: Working voltage: 13A 5000 MΩ 2000 VAC up to 400V class III, PD 2 as per VDE up to 500V as per UL1977 see page 7 for more details Material Connectors + Backshell: Thermoplastic Contact accomodation connectors accept TRIM TRIO size 16 or size 20 (depending on arrangement) removable snap-lock contacts Contacts to be ordered separately - see from page 25 to 54 In accordance with UL requirements (UL ECBT2.E and CSA ECBT8.E169916) Environmental Operating temperature: -40 C to C Flammability rating : UL94-V0 Salt spray: 500 hours Sealing (mated): IP67/69K (up to IP68/69K with the easy handling backshell) UV resistant: No mechanical degradation or important variation of color after 5 years of exposure in natural environment (equivalence exposure to sun and moisture as per ISO4892) Ordering information Type JC N N S P P Connector type 1 In-line receptacle 6 Cable plug 7 Jam nut receptacle Rear of the connector JC Backshell N Nut arrangements 10 Number of contacts Contact ender P Pin contacts - only for receptacle S Socket contacts - only for cable plug 20

2 discrete wire sealing contacts arrangements Size 10 Size 4 8 Size 7 All arrangements are available in plug and jam nut versions. 4 Ø 1.6 (#16 ) 8 Ø 1.6 (#16) Contacts* : 7 Ø 1.6 (#16 ) Ø 1.6 (#16 ) Assembly Instructions First contact in cavity A! - white mark - B/ : cavity A Range presentation A/ : cavity A Female plug + + Backshell 1 2 Place the grommet on the insulator & insert the other cables 3 Screw the backshell nut on the plug Female contact A JC104S / / JC8S /.0 3.0/ JC7S 6JCS /.0 5.0/ / 21

3 Female plug + + Female contact N104S N8S N7S 6NS A Male jam nut receptacle + + Backshell C min. D max. (panel thickness) B ±0,2 E max. F ±0,3 E ±0,25 PANEL CUT OUT ±0,2 ØH ±0,2 Shell size Ø A B C D E ±0.25 F Ø H JC104P / / JC8P / 3 / JC7P 7JCP / 5 / 36.7 E 22

4 Male jam nut receptacle + + D max. (panel thickness) PANEL CUT OUT ØH ±0,2 Ø A B C D E F Ø H Ø J N104P N8P N7P 7NP Male In-line + + Backshell L min. ØB ØA Ø Cable ra,ge Ø J ±0,2 Thread I B ±0,2 F ±0,3 C min. E ±0,25 E max. Ø A Ø B L JC104P / / JC8P / / JC7P 1JCP / / E 23

5 Male In-line + + L min. ØB ØA Ø A Ø B L N104P N8P N7P 1NP