CCM05 SD, MMC & minisd

Transcription

1 For one of the most common card formats, we offer various reading options in a small and sturdy packaging. This includes the smaller standard of the minisd, designed for the mobile communication needs. Features ccept both MMC and SD card (except ) Standard and reverse reading Long or short cover Smooth push push mechanism and write protect switches Front metal tab for better PCB tear-off resistance Front cover retention for temper resistant card entrance Physical Data Contacts Phosphor bronze Contact finish (towards the card) Gold over nickel contact Copper alloy / nickel overall finish contact Copper alloy / nickel overall finish Contact finish (towards the PCB) Gold over nickel Metal cover Copper alloy / nickel plated overall Cover ground tails Gold plated over nickel Molding High temp. Thermoplastic, UL 94V- Mechanical Data Number of contacts 7 (MMC), 9 (SD), (minisd) Operating life standard & reverse type, cycles Operating life push-push type, cycles Contact force (signal contact). N min. Card insertion force 4 N max. Card withdrawal force N min. Vibration ccording to IEC part 4, test 6d. to Hz / m/s / 3 axis / hours per axis No discontinuity > µs Mechanical shock Peak value m/s ms. 3 shock in each direction of each axis. No electrical discontinuity µs. Contact Electrical Data Voltage / ct Current / ct Contact resistance Voltage proof Insulation resistance Vdc m milliohms Vrms MΩ min. Low profile push push connectors (.6 mm for SD,. mm for minisd) Environmental Data Operating temperature Storage temperature Soldering temperature Moisture resistance Corrosion - C / +8 C -4 C / +8 C 3 C / sec according to MIL-STD-F, method 8 4 C / 93% HR / 96 hours. ccording to MIL-STD-F, method 3B, test condition B 48 hours according to IEC test f Ordering Code CCM- R9 CCM-76 R6 CCM-77 T48 CCM-77 T4 CCM-773 T CCM-77 T48 CCM-776 T CCM-777 T CCM-778 T4 Packaging MMC card pegs short cover SD card & MMC stand off SD card & MMC pegs with chamfer SD card & MMC pegs push-push minisd card SD card & MMC pegs minisd card push-push SD card & MMC pegs short cover SD card pegs reverse Please look at part number designation to determine packaging: T = Tray R = tape on reel - please contact Customer Service for quantity.

2 CCM SD, MMC & minisd (3,6 max includes solder tails) 3,4 4, CCM- SEE DETIL Date Code area, 6, 9,9 Card stop,7,,, 8,6 3, 6,,, -,,,3 (REF.), (REF.) (REF.) Pick and place area ø4 XX-XXX 8, 3?' 4?',3 DETIL 9,3,4, (REF.), ø ±, 7x,3 x 6x,4,,4 Contact location according to MMC specification,3 9, 7,6,8,4,4,8 7,6 RECOMMENDED PC BORD LYOUT 7x Contact foot area x Prohibited area,,3, C7 C6 C C4 C3 C C,8 ø, x 7,7 8,6,,9,6, 3,7,7,,,9,,8 Grounding foot area x,47 CCM-76,4 9,3 -,9, Card stop,6, 6 4,3 4,9,3,3 ø,,, Pick and place area ø4, -, 4,6,,3 3,6 7,6, SEE DETIL SWITCH 3,3 8, 4,3,3,9,6,86,34 3, 3,6,4,4,4,4,76,4 3,4,4,4,4,76 Switch foot area x,6,76 9,6 7, 4,8,4,4 4,8 7, 9,6 C8 C7 C6 C C4 C3 C C C9 Contact foot area x, (9x) 6, 3, 7,4,6,3,6, 9,8,3,,4,, Date-code area,, X X X,7,7,86,3 3,34,8 Grounding foot area, x "off" switch "open" DETIL WRITE PROTECT SWITCH NO FOR SD CRD max "on" switch "closed"

3 3,,8,,,7, 8 6, 7,6 4,3,8,ø ø, 4,, 8,8 4,,, 4,4,3 CCM-77 / CCM-77 SEE DETIL,8 CCM-77 SEE DETIL DETIL ion switch Logo Date code area CCM-77 -,, x RECOMMENDED PC BORD LYOUT Scale, ø, ±, indication 3, 4,, ø,6 ±,,8,,4 6x, = 9,37,4 6,6 CCM-777 (short cover),8 ø ø, RECOMMENDED PC BORD LYOUT 6,6, 4,3 6, 7,7, 9 6, 7,7 indication ø,±,,,,,3,7,4 4,4, ±,, X 6 = #8 #7 #6 # #4 #3 # # #9,9,,7,7,43 x R ±, 6,6 8,8,69 9,37 3,3,7,88, ø,6±,,8 3,4,4,7,3 4, 6,69

4 CCM-778 (reverse) 3, 8,3 6,4,3,9 4, ±,,78 ø, x,3 8,3 (,x6) =,4 4,9,7,8,6, Pattern prohibited area,7 RECOMMENDED PC BORD LYOUT 8,3,7 (,x6) =, 3,,8, 9,4,3 3,4 6,4 6,8 4,,, 4,7 9, 9, 3, 3,,7 ø,6±, (x),3, 8,3 Date code 6,, 8,93,3 7,8 3, 9,8 Detect/protect ground pad x line Connector center line 4 3,9 Card edge Connector center line CCM-77 (push push) RECOMMENDED PC BORD LYOUT, Date-Code area ø,4 -, 4, 4, 8,,4,,,4, 9,37,8,6 x 3,3,7,7,63, x,,6 3 9,3, 9 R CRD C/L CONNECTOR C/L (over stroke) (card eject stroke) 4, 3 8, x WP #8 #7 #6 # #4 # # #9 #3 CD,,,4,6,,7,69,,43,,9 (6x,) 8, 9, CRD CL 3,3 4, ±,, ±, 4,, 4 4,9 R,33, 3,9,8 4,3,7 3,7 ø,±, 3,6 4

5 CCM-773 (minisd),9 P,3 X = 3 6,,3 TYP. RECOMMENDED PC BORD LYOUT 6,,,7 6,6,7, 6,,9 6, ø,, x,4 3,3,7 Date code area,4 Logo 3 8 6,6,,,4 # #4 # #6 #7 #8 # #3## #9, 6, 3 9,9, 3,7,6,3 TYP. 6, P,3 X = 3,9 Card Edge CCM-776 (push push), 4,6 9,4,3 3,,,47 ± P,3 X = 3 6, ±,4,3 ±,,,4 RECOMMENDED PC BORD LYOUT P,3 X = 3,47±,,3 6,±,,3±,,,3 8,, Date Code, 6,8 # #6 #7 #8 #4 # # #3 # # #9, 3 8, (over stroke) (card eject stroke) ø, +, x 4 6? 9, , 3,, x To learn more about our CCM SD & MMC product lines, please visit Customer Support Locations France: +33.() Germany: +49 (3) Hong Kong: UK: US: