Modular Data Center Cooling Ultra High Efficiency Oasis Optimum DCIE
Oasis Optimum Modular Cooling Compact, Economic, Greener, Ultra High Efficiency Munters Oasis Optimum DCIE data center cooling solution focuses on energy efficiency. The modular design allows owners and operators clear budget optimization at the outset of a new data center build and follows LEED design concepts. High energy efficiency and sustainability mean lower capital expenditure in addition to significantly lower annual operating cost. Backed by our experienced in-house data center teams, Munters has designed and built hundreds of cooling systems for collocation, government, education and commercial clientelle. Flexible Data Center Cooling Solutions - the right choice The heart of the Oasis Optimum DCIE cooling system is the Munters patented Evaporative Polymer Exchanger (EPX), which provides ultra-high efficiency cooling while using up to 75% less energy than traditional high efficiency systems. In many cases the Oasis Optimum DCIE can meet all the cooling needs of a data center. The Oasis Optimum DCIE can help data centers reach ppue values below 1.1. The system is scalable in increments of 200kW* and the modules can simply be added on as your data center grows. This flexible aspect makes for the best choice in providing supplemental cooling or replacement of less efficient equipment on existing data centers. The Oasis Optimum DCIE is future-proof, and can easily accommodate advances in server technology and operating conditions. *IT heat rejection capacity depends on the operating temperatures of the data center. Typical Base Unit
Proven technology - outstanding quality The Oasis Optimum DCIE cooling system incorporates Munters innovative UL listed Oasis Indirect Evaporative Cooling technology for energy efficient cooling. This patented system uses an air-to-air heat exchanger to transfer data center heat to a separate outdoor airstream. Fresh outdoor air is drawn across polymer heat exchanger tubes which are wetted with a water spray. While filtered ambient air - scavenger air - flows over the saturated exterior tube surface, the evaporative heat transfer process efficiently cools hot aisle air flowing through the inside of the tubes. The award-winning design of the Oasis Indirect Evaporative Cooler ensures 100% of the data center air is recirculated and uncontaminated in order to provide a clean, stable IT environment. Munters are winners of the 2012 Future Thinking and Design Concepts Award. Principle of Operation Exhaust / Scavenger Air Optional Condenser Optional Coil Compressor Vestibule Cooled air is ducted back to data center for heat extraction Hot Aisle Return Air Scavenger Outside Air Cold Aisle Supply Air Hot Aisle Return Air Optional Cooling Coil (DX or CHW) Hot data center air enters EPX Polymer tube for sensible dry cooling by the evaporating water film on tube exterior Scavenger air flows up and around outside of tubes having extracted heat from air flowing inside tubes The systems have three modes of operation A: Sensible/Dry Mode B: Evaporating/Wet Mode C: Evaporating and supplementary Mechanical Cooling. Visit: www.munters.com/datacent res or watch the movie now:
Oasis Innovative Evaporative Cooling Systems These highly energy efficient and scalable units are factory-built incorporating plug & play technology, and requiring minimal work on site Consistently low ppue s accross variable loads Matches airflow to actual IT demand. ppue s remain consistently low whether the data center is partially or fully operating at 100% capacity. Resilience: Built to meet zone A1 and A2 ASHRAE standard through to Tier 4 levels of resilience with N+1 components if required. Financial: Significantly lower operational expenditure compared to traditional data center cooling solutions Flexibility Unit designed to be leaded easily using ISO 40ft containers, the truly flexible design will be fully configured and scaleable to suit your installation and capacity requirements. New Innovative Approach that delivers added capacity The Oasis Optimum DCIE has three modes of operation for low energy data center cooling which primarily utilizes free cooling. In the optimized mode natural forces are harnessed by adding water for indirect evaporative cooling to boost cooling. The filtered, ambient air is principaly cooled with indirect evaporative cooling. This saves siginificant amounts of money and carbon emissions. The third mode deploys mechanical cooling. The system is designed to achieve maximum efficiency. Munters Oasis Indirect Evaporative Cooling systems enable the IT equipment to be cooled to air temperatures of below 27 C/80.6 F (ASHRAE thermal guidelines for data processing environments 2009a) for more than 99% of the time without the need for mechnical cooling across a range of IT loads depending on the location. The supplementary mechnical cooling system is only used for additional cooling during extreme weather conditions. Enables up to 75% reduction in energy consumption vs. traditional data cooling ppue. National, European and International patents cover this innovative technology.
Standard Oasis Optimum DCIE - Standard Design (consult Munters for exact performance based on your location) Design System Cooling Capacity ITE Heat Rejection Delta T (return to supply) Heat rejection capacity depends on design 155 kw 20 F / 11.1 C supply & return temperatures 195 kw 25 F / 13.9 C 235 kw 30 F / 16.7 C Supply Air Volume per Unit 25,000 SCFM 40,000 m 3 /hr Base unit with end connections LxWxH & Weight 294 x88 x152 7453mm x 2235mm x 3854mm 13,000 lbs 5,910 kg Base unit with bottom connections inc. Roof mount option LxWxH & Weight Base unit with end connections and return plenum, inc. side mount-stacked-option LxWxH & Weight 342 x 88 x152 8687mm x 2235mm x 3854mm 16,000 lbs 7,257 kg 294 x88 x 212 7453mm x 2235mm x 5382mm 16,000 lbs 7,257 kg Mechanical cooling based on 75 F / 23.9 C supply temperature and 100 F / 37.8 C return temperature Mechanical Cooling Options Design ambient wet bulb temperature Delta T 75 F /23.9 C 80 F / 26.7 C 85 F / 29.4 C 90 F / 32.2 C DX 20 tons / 70 kw 20 F /11 C 13 tons /46 kw 20 tons /72 kw 28 tons /100 kw 36 tons /128 kw DX 30 tons / 105 kw 25 F /13.9 C 16 tons /56 kw 23 tons /82 kw 31 tons /110 kw 39 tons /138 kw DX 40 tons / 140 kw 30 F /16.7 C 19 tons /67 kw 26 tons /92 kw 34 tons /120 kw 42 tons /148 kw Note: Base unit can be selected without Mechanical DX based cooling option Location Shanghai, China Design Ambient dry bulb / extreme max wet bulb 100 F / 86.2 F 37.8 C / 30.1 C External Static Pressure 1.0in WC 250 Pa Case 1 Base design ITE Load 780 kw Cold Aisle supply/hot Aisle return 75 F / 100 F 23.9 C / 37.8 C Case 2 ASHRAE Recommended ITE Load 940 kw Cold Aisle supply/hot Aisle return 80 F / 110 F 26.7 C / 43.3 C Performance per Oasis unit at extreme max wb design Total Oasis Annual Performance Case 1 N=4, N+1 Redundancy, all units operating Case 2 N=4, N+1 Redundancy, all units operating *includes fan heat IT Load kw Oasis EPX Cooling tons/kw % Total Cooling* DX Cooling tons/kw % Total Cooling* Estimated Operating Power kw Estimated Annual Water Consumption Specification subject for change without prior notice Estimated Annual Energy Use Annual ppue 780 21/74 45% 26/92 55% 47.8 220,000 ft 3 /6300 m 3 650,000 kwh 1.09 940 35/123 63% 22/76 37% 43.2 280,000 ft 3 /7900 m 3 600,000 kwh 1.07
Examples of possible installations Base Oasis - End Connections - Flexible installation location Base Oasis - Bottom connection - Suits roof installation Base Oasis - End connection with return plenum - Suits perimeter install beside data hall High quality and precision factory production Oasis Optimum DCIE cooling system construction takes place in a dust free, spacious environment to allow comprehensive pre-site testing. Quality control is improved as all electrical systems are comprehensivley tested in the factory before the Oasis Optimum DCIE is delivered to site for final connection and further testing to ensure operation. This partial factory commissioning services/control system testing provides added supply security. Munters Corporation has been recognised for Intel Corporation s Preferred Quality Supplier (PQS) award for VOC and energy efficient air handling equipment.
Oasis Optimum DCIE These modular indirect evaporative cooling systems are robust and durable and can be delivered in a shorter time. The specially designed standardized modules have higher optimized engineering and maintenance access. Self-contained and shipped in a standard 40ft shipping container (to be returned) Multiple configurations to address varying IT and site requirements Latest data center indirect evaporative cooling innovation Proven experience in over 170MW of data center cooling Delivers industry-leading energy efficient cooling Industry leading ppue rating Designed to reduce data center cooling costs, deployment times and maintenance Oasis Optimum DCIE is an excellent option for either supplementing or replacing traditional data center cooling systems. Annual hours where Oasis Indirect Evaporative Cooler provides 27 C /81 F cold aisle supply based on hot aisle return air temperature of 39 C/102 F London Paris Berlin Shanghai Madrid Stockholm Hours run with Oasis EPX only Beijing Tokyo Moscow Istanbul Los Angeles Boston Lanzhou Hours run with Oasis EPX and supplementary cooling Sapporo Gwangju 0 1000 2000 3000 4000 5000 6000 7000 8000 9000
An international name, where the customer comes first. Munters, part of Nordic Capital, has offices in 30 countries and over 3,000 employees in many branches around the world. We are global leaders in energy efficient air treatment for comfort, process and environmental protection. Munters shares ideas within its international network, giving the Group an outstanding reputation as a reliable, fastacting and customer-orientated expert in air conditioning. Munters philosophy of customer satisfaction is central to our decision-making. When developing and manufacturing our systems, we see happy customers as our number one target. And this is what our employees strive to ensure every day. For more information on Munters, please visit www.munters.com/datacentres Australia Phone +61 2 8843 1588, dh.info@munters.com.au Austria Phone +43 1 6164298-92-51, luftentfeuchtung@ munters.at Belgium Phone +32 1528 5611, info@muntersbelgium.be Brazil Phone +55 41 3317 5050, munters@com.br Canada Phone +1 905 564 6466, dhinfo@munters.com China Phone +86 10 8048 3493, info@munters.com.cn Czech Republic Phone +420 775 569 657, info@munters-odvlhcovani.cz Denmark Phone +45 4495 3355, info@munters.dk Finland Phone +358 20 776 8230, laitemyynti@munters.fi France Phone +33 1 3411 5757, dh@munters.fr Germany Phone +49 4087 96900, mgd@munters.de India Phone +91 20 668 18 900, info@munters.in Italy Phone +39 0183 52 11, marketing@munters.it Japan Phone +81 3 5970 0021,mkk@munters.co.jp Korea +82 2761 8701, munters@munters. co.kr Mexico Phone +52 81 8262 5400, munters@munters.com.mx Netherlands Phone +31 172 433231, vochtbeheersing@munters.nl Poland Phone +48 58305 3517, dh@munters.pl Singapore Phone +65 6744 6828, info@munters.com.sg South Africa Phone +27 11 997 2000, info@munters.co.za Spain Phone +34 91 640 09 02, marketing@munters.es Sweden Phone +46 8 626 63 00, avfuktning@munters.se Switzerland Phone +41 52 343 8886, info.dh@munters.ch Thailand Phone +66 2642 2670, info@munters.co.th Turkey Phone +90 262 751 3750, info@muntersform.com UAE +971 4 8809295, middle.east@munters.com United Kingdom Phone +44 1480 432 243, dryair@munters.co.uk USA Phone +1 978 241 1100, dhinfo@munters.com Vietnam Phone +84 8 8256 838, vietnam@muntersasia.com Your local office