1 Cao XF AMA Plug-i Guide Avid supports Cao XF media through Avid s Media Access (AMA) method from a Avid editig applicatio. Thigs You Should Kow About the Cao XF AMA Plug-i To lik to Cao XF (MPEG-2 Full HD) media, you must have both Avid MXF AMA Plug-i ad the Cao XF AMA Plug-i istalled o your system. The Cao XF AMA plug-i supports both Avid Media Composer v4.0.5 ad higher, Avid Symphoy v4.0.5 ad higher, ad Avid NewsCutter v8.0.5 ad higher. Whe released, support of Cao s XF 300 ad 305 cameras. Avid does ot support MultiCamera editig with MXF AMA clips. For additioal AMA iformatio, see www.avid.com\ama. Cao XF Media The Cao XF305 ad Cao XF300 camera records MPEG-2 media oto compact flash cards. Through the Cao XF AMA plug-i ad the MXF AMA plug-i, you ca lik to Cao MPEG-2 media through the AMA method. You ca edit directly from a flash card, without havig to capture. You ca lik to a Cao XF flash card ad reader attached to your system or copy a Cao XF flash card to the root of a drive. The Cao XF AMA plug-i ad the Avid MXF AMA plug-i should be istalled o your system. To lik media through the AMA method, use Lik to AMA Volumes. For more iformatio, see The Avid Media Access (AMA) Workflow o page 4 ad Likig Media with AMA o page 7. For specific Cao XF workflow steps, see Workflow for Editig Cao XF Clips with AMA o page 18.
1 Cao XF AMA Plug-i Cao XF Formats ad Resolutios The followig table lists the formats ad resolutios available whe you work with GFCAM media: Resolutio/Bit Rate MPEG-2 HD 50 ad 35Mbits 25Mbits Raster/Frame Rate 1920 x 1080, 1280 x 720 1440 x 1080 Number of Audio Chaels (maximum) 4 Cao XF Files ad Folders Cao XF video ad audio media files record i MXF format. Each card stores the video ad audio files i: (Widows) drive:\contents\clips (Macitosh) Macitosh HD/CONTENTS/CLIPS AMA does ot recogize clips if the folder ames i the selected path cotai double-byte characters (DBCS). AMA recogizes folders with the directory path that icludes ASCII alphaumeric characters. Coectig the Cao XF Camera or CF Card Reader You ca coect the Cao XF camera or a CF card reader directly through a idustry-stadard USB 2.0 port o your computer. See the Cao XF documetatio for iformatio o coectig the camera or a card. The flash card mouts as idividual media drives o your desktop ad the lik to your Avid editig system through AMA. Spaed Clips ad Cao XF Spaed clips are clips that exted from oe card to aother. Avid supports workig with spaed Cao XF clips i your Avid editig applicatio. 2
Cao XF Media Copyig Cao XF Files to a FireWire or Network Drive After you mout the flash card, you ca copy the Cao XF media to a FireWire drive or a etwork drive ad the eject the flash card. You might fid it coveiet to copy several flash cards to other drives so you ca reuse the cards. You ca coect a FireWire drive, for example, ad store the cotets of several flash cards o the drive so you ca keep usig the flash cards i the camera. To copy the Cao XF flash cards to aother drive: 1. O the drive, set up a folder for each flash card you wat to copy. Avid recommeds that you do ot place the media folder at the top level of the drive. 2. Give each folder a uique ame that idetifies the flash card. The ame does ot have to be the same as the actual flash card ame. 3. Navigate to the actual flash card ad select the CONTENTS folder. 4. Do oe of the followig: t Copy ad paste the CONTENTS folder to the folder o the other drive. t Click the CONTENTS folder ad drag it to the folder o the other drive. 5. Eject the flash card. 3
1 Cao XF AMA Plug-i The Avid Media Access (AMA) Workflow Avid Media Access (AMA) is a plug-i architecture that lets you lik directly to clips from a third-party volume (for example, a P2, XDCAM or GFCAM device) or to a file based media clip (for example, QuickTime or MXF) ito a bi without storig the media directly o your system. AMA lets you be more productive by browsig ad editig directly from the device or volume. The bi lets you log, browse, ad view these clips i the usual way. Oce the third-party device is discoected, the bi still exists with the clips, although the media displays as offlie. Whe you recoect the device, the media appears olie. The system automatically displays the media; you do ot eed to mout the drives. The AMA method also allows for more metadata to be brought ito the bi which gives you more iformatio about the media. For example, essece marks (or locators) associated with the clip are automatically brought ito your bi. To display metadata iformatio i your bi, see Addig a Metadata Bi Colum Headig, i the Avid editig Help. The followig cosideratios ad limitatios apply: Whe the AMA settig is activated, the o-ama method does ot appear i the File meu. Deactivate the AMA settig to display the File > Import P2 (ad Import XDCAM Proxy) optio. The AMA settig is o by default. The Lik to AMA File(s) meu choice is available for third-party AMA file based media plug-is. To see the available AMA plug-is available for your Avid editig applicatio, go to www.avid.com\ama. You must have a third-party plug-i istalled o your system for the optio to display. Widows UNC (Uiversal Namig Covetio) paths are ot supported with AMA media. To lik AMA media, map it to the drive. Whe you reder a audio effect o a AMA media clip, all audio media files are writte as PCM (MXF), regardless of what you set for the audio file format. The Dyamic Relik optio is ot supported with AMA clips. Avid does ot support MultiCamera editig with AMA clips. You should ot mix workflows. Either use the AMA method or use the traditioal import/batch import method. 4
The Avid Media Access (AMA) Workflow Selectig the AMA Settigs You ca set optios i the AMA Settigs dialog box to tur AMA o or off (o by default), to automatically mout your volumes, ad to customize your bi. To check for ad dowload additioal or updated AMA plug-is, click the lik to www.avid.com/ama. To set up AMA: 1. I the Project widow, click the Settigs tab. 2. Double-click AMA. The AMA Settigs dialog box appears. 3. Click the Volume Moutig tab. 4. Select Eable AMA Volume Maagemet. By default, this optio is selected. If you deselect the optio ad the reselect it, you must quit ad restart your Avid editig applicatio. Whe this optio is selected, the File > Import meu item is o loger available. 5. If you wat the system to automatically sca drives (volumes) every time, select the optio Whe moutig previously mouted volumes, do ot check for modificatios to the volume. This optio is off by default. 5
1 Cao XF AMA Plug-i 6. If you remout a volume, deselect the optio Whe moutig previously mouted volumes, do ot check for modificatios to the volume, ad the system checks the modificatio date of the device or drive agaist the last time the clips were liked. If the date is the same, the clips come back olie. If the date is differet, the system liks the clips agai, ad liks ay ew clips added to the volume. This optio is off by default. If you restart your Avid editig applicatio, the system automatically rescas the drives regardless of the optios you ve selected. 7. To customize your bi, click the Bis tab. By default, the system liks your clips ito a ew bi usig the same ame as your project ame. If you wat to chage the bi ame or wat to use a already existig bi, you ca make these chages i the Bis tab. For more iformatio o Bis optios, see AMA Settigs: Bis Tab o page 17. Depedig o your AMA Settigs, every time you isert a card ito a reader or coect a device, the system creates a ew bi whether the same card or device has bee previously iserted or ot. 8. Click OK. Viewig Istalled AMA Plug-is Oce you dowload ad istall a third-party plug-i from www.avid.com/ama, you ca eter a cosole commad to view a list ad the versio umber of the plug-is istalled o your system. To display the list of istalled AMA plugis: 1. Select Tools > Cosole. 2. I the commad etry text box, type: AMA_ListPlugis 3. Press Eter (Widows) or Retur (Macitosh). AMA_ListPlugis displays a list of the plugis istalled o your system. 6
The Avid Media Access (AMA) Workflow Uderstadig Likig with AMA Likig lets you poit to media o a device or poit to the media directly o your system. The media physically resides o your system or it ca reside o a exteral device. The device ca be a camera, a card reader, a optical disk, a virtual volume o your desktop or o a server. The media poits to the most recet source. For example, if you lik the clips to a virtual volume o your desktop, the drive colum displays the desktop as the locatio where the clips are liked to. If you the isert a card ito a reader with the same media, the clips poit to the media o the card. If you remove the card, the clips poit to the media o the card ad the clips appear offlie. The card beig the most recet source. Oce the card is reiserted, the clips i the bi appear olie. Likig Media with AMA If you lik to media which origiates o a volume (P2, XDCAM EX, XDCAM, or GFCAM), use the File > Lik to AMA Volume(s) optio. If you lik directly to the media file clip (QuickTime or MXF), use the File > Lik to AMA File(s) optio. For optimum viewig ad playig, Avid recommeds a sigle clip legth should ot exceed more tha 12 hours. The decompose optio from the Clip meu is ot available with AMA. You do ot eed to decompose clips whe you use the AMA method. To lik clips o a volume automatically with AMA: 1. Isert a P2 card, a XDCAM EX card, a XDCAM disk, RED card, or a GFPAK ito the device. The system scas the device ad liks the clips ito a bi (based o the AMA settigs). To maually lik clips from aother volume with AMA: 1. Select File > Lik to AMA Volumes. The Browse For Folder dialog box opes. 2. Navigate to the P2, XDCAM, RED or GFCAM clips, ad the click OK. For P2, avigate oe level above the Cotets folder. For XDCAM disks, avigate to oe level above the Clip folder. For XDCAM EX, avigate to oe level above the BPAV folder. For RED, avigate to the root directory of the RED card. For GFCAM, avigate to the root directory of the GFPAK. 7
1 Cao XF AMA Plug-i Depedig if you are usig a existig bi or creatig a ew bi, the Bi Selectio dialog box opes. 3. Select Bi Selectio optios. Optio Descriptio Sigle Bi Based O Selected Folder Places all liked clips ito oe default bi. Sigle Bi Named Bi(s) Based o Curret AMA Settig Bi(s) Based o Subfolders Top Bi Widow Lets you create a ew bi ad type i a ew bi ame. Places all liked clips ito that bi. Places the clips i the bi(s) you set up i the AMA Settigs Bis tab. Places the clips i bi(s) based o their subfolders. Places the clips i the active bi. If you relik a sequece ad the bi that stores the AMA refereced clips is closed, the media does ot relik. Before you relik, ope the bi of the refereced clips. 4. Click OK. The clips appear i the bi or bis depedig o the optios you selected, they highlight i yellow. 8
The Avid Media Access (AMA) Workflow To maually lik clips from a file with AMA: 1. Select File > Lik to AMA File(s). You ca also right-click a bi ad select Lik to AMA File(s). The system igores the settigs you have selected i the AMA Volume Moutig settigs. 2. If there is o active bi, a dialog box appears askig you to select a bi. The Select file(s) for AMA likig dialog box opes. 3. From the AMA Plugi Filter meu, select the type of file. Optio All AMA Plugis Files QuickTime MXF RED R3D Descriptio Searches ad displays all files. Searches ad displays oly QuickTime files. Searches ad displays oly MXF files. Searches ad displays oly RED files. 4. Select the file(s) you wat to lik. Ctrl+click or Shift+click to select multiple files. 5. Click Ope. The clips appear i the active bi, they highlight i yellow. If the system caot lik a file, a error message displays iformig you to ope the Cosole widow for more iformatio about the file(s) i error. If you move the clip from the origial drive to aother drive o your system, the clip displays as offlie i your bi. If you move a source file from oe locatio to aother ad the back to the origial locatio, you might eed to refresh the bi to redisplay the clip. Close ad reope the bi to refresh the bi. 9
1 Cao XF AMA Plug-i Workig with AMA Multiple Resolutio Media If you choose to lik to low-resolutio media, you ca lik to ay combiatio of proxy or high-resolutio audio or video media. For istace, you ca lik to the most compressed (proxy) video ad the highest quality audio. Disks ca take some time spiig up to lik the high-resolutio media, so likig to the low-resolutio media saves you time. You ca edit with the low-resolutio media ad oce you are fiished, you ca relik to the high-resolutio media. At this time, Avid AMA supports likig to multiple resolutio XDCAM media oly. For specific XDCAM multiple resolutio workflow steps, see Workig with AMA Multiple Resolutio Media o page 10. Likig to AMA Multiple Resolutio Media Before you lik to low-resolutio or high-resolutio media, you eed to select the video ad audio quality i the AMA Settigs Quality tab. The steps below highlight likig to low-resolutio media. You ca also lik to high-resolutio media. For iformatio about likig with AMA, see The Avid Media Access (AMA) Workflow o page 4. To lik to low-resolutio media: 1. I the Project widow, click the Settigs tab. 2. Double-click AMA. The AMA Settigs dialog box appears. For iformatio about the AMA Settigs, see AMA Settigs o page 17. 10
The Avid Media Access (AMA) Workflow 3. Click the Quality tab. 4. Click the appropriate resolutio for your video i the AMA Lik Preferece sectio, ad click OK. If a particular resolutio is ot available, it will be grayed out. 5. Isert the disk ito the device. 6. Select Bi Selectio optios from the Bis tab. For iformatio o bi selectio optios, see Likig Media with AMA o page 7. 7. Select File > Lik to AMA Volume. The Browse for Folder dialog box opes. 8. Navigate to the clips, ad the click OK. The clips appear i the bi or bis depedig o the bi optios you select. Clips highlight i yellow. The Video colum i the bi displays the project type of the clip. 11
1 Cao XF AMA Plug-i Switchig Betwee Multiple Resolutio Media Oce you lik to the low-resolutio or high-resolutio media ad complete your edits, you ca easily switch from low to high ad high to low-resolutio media. Whe you switch to a differet resolutio, the system replaces the clip i the bi with the ew clip ad resolutio. The steps below highlight switchig from low-resolutio to high-resolutio media. You ca also switch from high-resolutio to low-resolutio. For XDCAM, if you use the Soy PDZ-1 software to assig a User Disc ID, the Avid editig system displays this iformatio i a bi colum ad kows what disk ame is associated with each clip. To switch from low-resolutio to high-resolutio media: 1. Isert the disk i the device. 2. Select the low-resolutio clips i the bi. 3. Right-click the bi ad select Modify AMA Resolutios. The AMA Resolutios Quality dialog box appears. 4. Click the Highest Quality for your video (audio is always set to Highest Quality) ad click OK. The highest quality clips replace the most compressed (low-resolutio) clips i the bi, they highlight i yellow. If the bi cotais clips from multiple volumes, you will be prompted to isert aother disk. 12
The Avid Media Access (AMA) Workflow Cosolidatig Multiple Resolutio Media Whe you are ready to move your media to shared storage, you ca lik to your resolutio ad cosolidate at the same time. The steps below highlight cosolidatig high-resolutio media. You ca also cosolidate low-resolutio media. For iformatio o why you should cosolidate, see Cosolidatig Media i the Avid editig Help. To cosolidate high-resolutio media: 1. I the Project widow, click the Settigs tab. 2. Double-click AMA. The AMA Settigs dialog box appears. For iformatio about the AMA Settigs, see AMA Settigs o page 17. 3. Click the Quality tab. 4. Click the appropriate resolutio for your video i the Cosolidate Preferece sectio, ad click OK. If a particular resolutio is ot available, it will be grayed out. 13
1 Cao XF AMA Plug-i 5. To cosolidate the clip, follow the steps i Usig the Cosolidate Commad i the Avid editig Help. The resolutios you select i the Cosolidate Preferece area of the AMA Settigs Quality tab displays i the Trascode/Cosolidate dialog box whe you cosolidate or trascode. Relikig to AMA Files After you lik AMA QuickTime files ito your sequece, you have the optio to make chages (i a third party applicatios, such as Adobe After Effects) to that file. If you chage the fileame or chage the locatio of the file, the best way to lik that clip back ito your sequece is through the relik optio. Relikig to a AMA file allows you to lik to a differet file. This process oly works if the targeted file is compatible with the old file, for example the file has the same duratio, edit rate or umber of tracks. This feature is helpful whe you have a group of liked clips that were moved to a differet folder or drive. You ca relik the clips to the ew locatio. You ca also use this feature to toggle betwee differet versios of a QuickTime movie, for example a low-resolutio versio of the movie is mymovie_dv.mov ad the high-resolutio versio of the movie is mymovie_1to1.mov. You ca relik to both of these versios, to see which clip works better i your sequece. At this time, Relik to AMA File(s) is oly available with AMA QuickTime files. 14 To relik to a AMA QuickTime file: 1. Lik to a AMA QuickTime file. The clips highlight yellow i the bi. For iformatio o likig, see Likig Media with AMA o page 7. 2. If you the decide to chage the origial clip i the bi i your third-party applicatio, create the ew movie file. 3. I your bi, select the clip or clips you wat to relik. 4. Select File > Relik to AMA File(s). The Select file to relik AMA clip dialog box opes askig you to locate the ew file. 5. Locate the ew file. If you have multiple clips selected i the bi, the system prompts you for the locatio of each file, oe at a time. 6. Click Ope. The ew clip highlights i the bi. If the ew file is ot compatible with the clip i the bi (it does ot have the same duratio, edit rate or umber of tracks), the clip i the bi retais its origial lik.
The Avid Media Access (AMA) Workflow The AMA Plug-i Log File The Avid system creates a AMA plug-i log file whe you lik clips. The log file records errors ad iformatio about the clips. If you experiece ay problems while you lik clips or if you receive a error message, check the AMA log file to get more iformatio about the error (for example: a corrupt file or a bad fileame). You ca view the log file from the followig locatio o your system: (Widows) drive:\program Files\Avid\Media Composer\Avid FatalError Reports. The ame of the log file is AMALoggerMM_DD_YY.log. (Macitosh) Volume/Users/Shared/AvidMediaComposer/Avid FatalError Reports. The ame of the log file is AMALoggerMM_DD_YY.log. Usig Virtual Volumes You ca use a virtual volume to copy media from a card or disk. This lets you use the card or disk agai. A virtual volume ca be a folder o your desktop or a folder located o a server. However, the virtual volume folder should reside oe level dow from the root level i order for the system to display it as a virtual volume. The followig are examples of virtual volumes: C:\Desktop\BPAV Z:\P2\Card 1 Z:\GFPAK\ With the AMA method, all drives ad virtual volumes associated with your bi mout automatically. You caot remove a volume while i AMA, however you ca remove a virtual volume. To umout a virtual volume: 1. Choose File > Umout. The Umout dialog box opes. 2. Select the virtual volume you wat to remove. 3. Click OK. The system removes the virtual volume from your system ad clips liked to this virtual volume appear offlie. Whe you restart your Avid editig applicatio, the system scas the system for virtual volumes ad the clips appear olie. 15
1 Cao XF AMA Plug-i Virtual Volumes ad AMA Bis If you select Volume Name i the AMA Bi Settigs tab, the system ames the bi the same ame as the virtual volume drive ame. If you cotiue to use the same virtual volume to lik other media through AMA, the system cotiues to place the liked media i the same bi. If you wat to create a ew bi for differet types of media you lik through AMA, you ca either create a ew virtual volume drive for each type of media (XDCAM, XDCAM EX, P2, GFCAM, etc.) or you ca create a ew bi every time you lik to ew media o a virtual volume. To create a ew bi o the same virtual volume: 1. Before you lik your media through AMA, click the Settigs tab i the Project widow. 2. Double-click AMA. 3. Click the Bis tab. 4. Select Create a ew bi ad specify a ew bi ame. 5. Click OK. 6. Select File > Lik to AMA Volumes. The media appears i the ewly created bi. Repeat these steps for each type of media. Deletig Clips You ca delete master clips, but you caot delete media files that reside o drives. Your Avid editig applicatio treats files as read-oly devices. You ca delete master clips ad media files the same way you delete other master clips ad media files. However, you might ot be able to delete files that you moved rather tha copied. If you caot delete master clips ad media files, first ulock the clips as described i the secod procedure, ad the delete them. To delete files from cards/volumes: 1. Quit your Avid editig applicatio. 2. O the desktop, avigate to the drive. 3. Select the files you wat to delete ad press the Delete key. 16
AMA Settigs To delete files o a local drive i your Avid editig applicatio: 1. I a bi, select the clips you wat to delete. 2. (Optio) Right-click ad select Ulock Bi Selectio. 3. Press the Delete key. The Delete dialog box opes. 4. Select Delete master clips ad Delete associated media files. 5. Click OK. AMA Settigs AMA Settigs: Bis Tab [IDH_AMA_Settigs i mai headig above] Optio Use active bi Create a ew bi Display imported headframe Display editor headframe Descriptio Whe this optio is selected, your Avid editig applicatio uses the curretly active bi to store clips imported usig AMA. Whe this optio is selected, your Avid editig applicatio creates a ew bi to store clips imported usig AMA ad cotrols the bi ame. This is the default optio. Default bi amig covetio: uses the project ame for the bi (bi ame followed by a cosecutive umber). Volume ame: the ame or label of the volume (for example D:). Specify bi ame: lets you eter a ew bi ame. Whe this optio is selected, your Avid editig applicatio displays the device-defied headframe. Whe this optio is selected, your Avid editig applicatio displays your Avid editig applicatio s headframe or frame ico i Frame view. 17
1 Cao XF AMA Plug-i AMA Settigs: Volume Moutig Tab Optio Eable AMA Volume Maagemet Whe moutig previously mouted volumes, do ot check for modificatios to the volume. Descriptio Eables AMA likig of file-based media from supported third-party devices ad drives. You must quit ad restart your Avid editig applicatio for the chages to take effect. If you select this optio, your Avid editig applicatio automatically scas ad liks all clips from the third-party device ad drive every time a device or drive is attached to your system. If you do ot select this optio, the system checks the modificatio date of the device or drive agaist the last time the clips were liked. If the date is the same, the clips come back olie. If the date is differet, the system liks the clips agai, ad liks ay ew clips added to the volume. The optio is off by default. Workflow for Editig Cao XF Clips with AMA A typical workflow is as follows: 1. The Cao XF AMA plug-i ad the MXF AMA plug-i should be istalled o your system. 2. Mout the flash cards. The system liks the Cao XF clips automatically ito a bi. If you use multiple flash cards ad you remove oe of the cards, your media displays offlie. 3. Use the master clips to edit ad output a sequece. 4. (Optio) Reame the clips to orgaize your material. 5. Cosolidate or trascode your sequece or clips. The media cosolidates to the destiatio you set i the Media Creatio dialog box. Cosolidatig your media helps whe you work with multiple P2 cards. If a card is removed from the reader, cosolidatig lets you view your sequece with all the media olie. Whe you cosolidate, if you wat to keep your AMA clips liked to the origial source, select the optio Keep Master clips liked to media o the origial drive, i the Copyig Media Files dialog box. For iformatio o cosolidatig your sequece, see Cosolidatig Media i the Avid editig Help. For iformatio o trascodig your sequece, see Usig the Trascode Commad i the Avid editig Help. 6. Remove the flash card. 18
Workflow for Editig Cao XF Clips with AMA Legal Notices Product specificatios are subject to chage without otice ad do ot represet a commitmet o the part of Avid Techology, Ic. This product is subject to the terms ad coditios of a software licese agreemet provided with the software. The product may oly be used i accordace with the licese agreemet. Avid products or portios thereof are protected by oe or more of the followig Uited States Patets: 5,077,604; 5,267,351; 5,309,528; 5,355,450; 5,396,594; 5,440,348; 5,467,288; 5,513,375; 5,528,310; 5,557,423; 5,568,275; 5,577,190; 5,584,006; 5,634,020; 5,640,601; 5,644,364; 5,654,737; 5,715,018; 5,719,570; 5,724,605; 5,726,717; 5,729,673; 5,745,637; 5,752,029; 5,754,180; 5,754,851; 5,799,150; 5,812,216; 5,828,678; 5,842,014; 5,852,435; 5,905,841; 5,929,836; 5,930,445; 5,946,445; 5,986,584; 5,987,501; 6,016,152; 6,018,337; 6,023,531; 6,058,236; 6,061,758; 6,091,778; 6,105,083; 6,118,444; 6,130,676; 6,134,607; 6,141,691; 6,198,477; 6,201,531; 6,223,211; 6,249,280; 6,269,195; 6,330,369; 6,351,557; 6,353,862; 6,357,047; 6,392,710; 6,404,435; 6,407,775; 6,417,891; 6,426,778; 6,477,271; 6,489,969; 6,512,522; 6,532,043; 6,546,190; 6,552,731; 6,553,142; 6,570,624; 6,571,255; 6,583,824; 6,618,547; 6,636,869; 6,665,450; 6,678,461; 6,687,407; 6,704,445; 6,747,705; 6,763,134; 6,766,063; 6,791,556; 6,810,157; 6,813,622; 6,847,373; 6,871,003; 6,871,161; 6,901,211; 6,907,191; 6,928,187; 7,043,058; 7,081,900; 7,103,231; 7,266,241; 7,280,117; RE40,107; 7,403,561; 7,433,519; 7,512,885; 7,545,957; D352,278; D392,267; D392,268; D392,269; D395,291; D396,853; D398,912. Other patets are pedig. Avid products or portios thereof are protected by oe or more of the followig Europea Patets: 0506870; 0515031; 0635188; 0674414; 0694243; 0705517; 0752174; 0857293; 0976108; 0988756; 1068723; 1068734; 1111910; 1173850; 1629675. Other patets are pedig. Avid products or portios thereof are protected by oe or more of the followig Uited States Patets: 5,077,604; 5,267,351; 5,309,528; 5,355,450; 5,396,594; 5,440,348; 5,467,288; 5,513,375; 5,528,310; 5,557,423; 5,568,275; 5,577,190; 5,584,006; 5,634,020; 5,640,601; 5,644,364; 5,654,737; 5,715,018; 5,719,570; 5,724,605; 5,726,717; 5,729,673; 5,745,637; 5,752,029; 5,754,180; 5,754,851; 5,799,150; 5,812,216; 5,828,678; 5,842,014; 5,852,435; 5,905,841; 5,929,836; 5,930,445; 5,946,445; 5,986,584; 5,987,501; 5,999,406; 6,016,152; 6,018,337; 6,023,531; 6,038,573; 6,058,236; 6,061,758; 6,069,668; 6,091,778; 6,105,083; 6,118,444; 6,130,676; 6,134,607; 6,141,007; 6,141,691; 6,198,477; 6,201,531; 6,211,869; 6,223,211; 6,249,280; 6,269,195; 6,330,369; 6,351,557; 6,353,862; 6,357,047; 6,392,710; 6,404,435; 6,407,775; 6,417,891; 6,426,778; 6,477,271; 6,489,969; 6,512,522; 6,532,043; 6,546,190; 6,552,731; 6,553,142; 6,570,624; 6,571,255; 6,583,824; 6,596,031; 6,618,547; 6,636,869; 6,665,450; 6,678,461; 6,687,407; 6,704,445; 6,747,705; 6,763,134; 6,763,523; 6,766,063; 6,766,357; 6,791,556; 6,810,157; 6,813,622; 6,847,373; 6,871,003; 6,871,161; 6,901,211; 6,907,191; 6,928,187; 7,043,058; 7,081,900; 7,103,231; 7,266,241; 7,280,117; RE40,107; 7,403,561; 7,433,519; 7,512,885; 7,545,957; D352,278; D372,478; D373,778; D392,267; D392,268; D392,269; D395,291; D396,853; D398,912. Other patets are pedig. Avid products or portios thereof are protected by oe or more of the followig Europea Patets: 0506870; 0515031; 0635188; 0674414; 0694243; 0705517; 0752174; 0857293; 0895623; 0976108; 0988756; 1068617; 1068723; 1068734; 1111910; 1173850; 1629675. Other patets are pedig. No part of this documet may be reproduced or trasmitted i ay form or by ay meas, electroic or mechaical, icludig photocopyig ad recordig, for ay purpose without the express writte permissio of Avid Techology, Ic. Copyright 2010 Avid Techology, Ic. ad its licesors. All rights reserved. Prited i USA. Att. Govermet User(s). Restricted Rights Leged U.S. GOVERNMENT RESTRICTED RIGHTS. This Software ad its documetatio are commercial computer software or commercial computer software documetatio. I the evet that such Software or documetatio is acquired by or o behalf of a uit or agecy of the U.S. Govermet, all rights with respect to this Software ad documetatio are subject to the terms of the Licese Agreemet, pursuat to FAR 12.212(a) ad/or DFARS 227.7202-1(a), as applicable. Trademarks 003, 192 Digital I/O, 192XD I/O, 888 I/O, AirPlay, AirSPACE, AirSPACE HD, AirSpeed, ALEX, Aliebrai, AiMatte, AudioMarket, AudioPages, AudioSuite, AudioVisio, AutoSyc, Avid, Avid Advaced Respose, Avid DNA, Avid DNxcel, Avid DNxHD, AVIDdrive, Avid DS Assist Statio, Avid EditStar, Avid Learig Excellerator, Avid Liquid, Avid Liquid Chrome Xe, Avid MEDIArray, Avid Mojo, AvidNet, AvidNetwork, Avid NewStar, Avid Remote Respose, AVIDstripe, Avid Uity, Avid Uity ISIS, Avid VideoRAID, Avid Xpress, AVoptio, AVX, Beauty Without The Badwidth, Boom, C 24, CaptureMaager, ChromaCurve, ChromaWheel, Commad 24, Coectiv, CoutDow, DAE, Dazzle, Dazzle Digital Video Creator, Deko, DekoCast, D-Fi, D-fx, DigiDelivery, Digidesig, Digidesig Audio Egie, Digidesig Itelliget Noise Reductio, DigiDrive, DigiLik, DigiMeter, DigiSerial, DigiStudio, DigiStudio Cotrol, Digital Noliear Accelerator, DigiTraslator, DINR, DNxchage, do more, DVD Complete, D-Verb, Eleve, Equiox, EveryPhase, ExpertReder, Fastbreak, Fast Track, FieldPak, Film Composer, FilmScribe, Flexevet, FluidMotio, FXDeko, G7, G-Rack, HD Core, HD Process, HDPack, HYBRID, HyperCotrol, HyperSPACE, HyperSPACE HDCAM, IllusioFX, Image Idepedece, inews, inews Assig, inews CotrolAir, Istatwrite, Istict, Itelli-sat Broadcastig Recordig Maager, Itelli-Sat, IterFX, Iterplay, itone, Itraframe, is9, is18, is23, is36, ISIS, IsoSyc, KeyRig, KeyStudio, LauchPad, LeaderPlus, Lightig, ListSyc, Lo-Fi, Magic Mask, Make Aythig Hollywood, make maage move media, Marquee, M-Audio, M-Audio Micro, Maxim, Mbox, MCXpress, Media Browse, Media Composer, 19
1 Cao XF AMA Plug-i MediaDock, MediaDock Shuttle, Media Fusio, Media Illusio, MediaLog, Media Reader, Media Recorder, MEDIArray, MediaShare, MediaStream, Media Suite, Meridie, MetaFuze, MetaSyc, MicroTrack, Midima, MissioCotrol, Mix Rack, MixLab, Moviebox, Moviestar, NaturalMatch, Nearchive, NetReview, NewsCutter, Nitris, NRV-10 iterfx, Octae, OMF, OMF Iterchage, OMM, ODVD, Ope Media Framework, Ope Media Maagemet, Palladium, Piacle, Piacle DistaTV, Piacle Geiebox, Piacle HomeMusic, Piacle MediaSuite, Piacle Mobile Media, Piacle Studio, Piacle Studio MovieBoard, Piacle Systems, ProEcode, ProServices, ProSessios, Pro Tools, QuietDrive, Recti-Fi, Reel Tape Delay, Reel Tape Flager, Reel Tape Saturatio, RetroLoop, rs9, rs18, Salesview, Sci-Fi, Scorch, Scorefitter, ScriptSyc, SecureProductioEviromet, Sessio, Show Ceter, Sibelius, SIDON, Soft SampleCell, Soft-Clip Limiter, Soud Desiger II, SPACE, SPACEShift, SpectraGraph, SpectraMatte, Sputik, Starplay, SteadyGlide, Streamfactory, Streamgeie, StreamRAID, Strike, Structure, Studiophile, SubCap, Sudace Digital, Sudace, Symphoy, SYNC HD, SychroSciece, SychroScope, Sytax, TDM FlexCable, Thuder, Tita, Titasyc, TL Aggro, TL AutoPa, TL Drum Rehab, TL Everyphase, TL Fauxlder, TL I Tue, TL MasterMeter, TL Metro, TL Space, TL Utilities, Torq, Torq Xpoet, Trasfuser, Trigger Figer, Trillium Lae Labs, TruTouch, UityRAID, Vari-Fi, Velvet, Veom, VideoRAID, Video Slave Driver, VideoSPACE, VideoSpi, Vortx, Xdeck, X-Form, Xmo, Xpoet, ad X-Sessio are either registered trademarks or trademarks of Avid Techology, Ic. i the Uited States ad/or other coutries. Adobe ad Photoshop are either registered trademarks or trademarks of Adobe Systems Icorporated i the Uited States ad/or other coutries. Apple ad Macitosh are trademarks of Apple Computer, Ic., registered i the U.S. ad other coutries. Widows is either a registered trademark or trademark of Microsoft Corporatio i the Uited States ad/or other coutries. All other trademarks cotaied herei are the property of their respective owers. Cao XF AMA Plug-i Part Number 0130-30410-01A 6/10/10 20