Mking/Answering Video Clls Video Clls... 80 Mking Video Cll... 80 Receiving Video Cll... 83 Chr-den... 85 Setting the Imge to Send to the Other Prty... 86 Setting Hndsfree for Video Clls... <SpekerPhone> 87 Setting Displyed Imge during Video Cll... 87 Setting the Answer Hold Tone nd Imge... <Videocll Answer Hold> 89 Setting Video Cll Hold Tone nd Imge... <Videocll Hold> 90 Chnging the Video Cll Settings... <Videocll Settings> 90 79
Mking/Answering Video Clls Video Clls Video Clls Video clls re vilble between DoCoMo video-phones. DoCoMo video-phones comply with "3G-324M* 1, n interntionl stndrd developed by 3GPP* 2 ". The hndset cnnot connect to video phone tht uses different system from DoCoMo video-phones. *1: 3G-324M This is n interntionl stndrd for mobile video-phones of the third genertion. *2: 3GPP (3rd Genertion Prtnership Project) This is regionl stndrds orgniztion for developing common technicl specifictions for the third genertion mobile communictions system (IMT-2000). There re 2 communiction speeds for video clls: 64K (64Kbps) nd 32K (32Kbps). However, 32K video clls re not supported on this FOMA hndset. This FOMA hndset does not hndle remote monitoring function. This FOMA hndset cnnot be connected to n externl device to use video clls. Components of Video Cll Screen Min window bsub window cthe other prty's phone number/nme dcommuniction/settings/cll time sttus eopertion icon b c d / : Switch between the cmer imge nd lternte imge P86 e / : Plce the cll on hold or resume the ctive cll P83 / : Set/Cncel the Hndsfree cll P83 / : Switch between the min nd sub windows P87 / : Switch between the In nd Out Cmers P86 / : Show/Hide icons displyed t the top of the screen P87 : Switch between the Full Action Mode nd Prtil Action Mode of the Chr-den P86 Mking Video Cll Enter phone number The function menu on the Phone number entry screen P52 Strt from the city code even for n inside the city cll. To mke cll to fixed line phone Are Code - City Code - Phone Number To mke cll to mobile phone 090-XXXX-XXXX/080-XXXX-XXXX To mke cll to PHS 070-XXXX-XXXX Phone number entry screen 80
b t A cll tone is herd from the Erpiece, nd the diling screen with the messge "Video Clling..." ppers till the other prty nswers. c Digitl communiction chrges pply from the time the Connecting screen opens. j: Enlrge or shrink the cmer imge. 0 to 9: Send touch-tone signls (DTMF). p to terminte the cll Connecting screen Video cll screen Folding the FOMA hndset during cll termintes the cll. However, when using the miniusb Stereo Hedset M01 (optionl), etc., the cll will not be terminted when the hndset is closed. (The lternte imge/chr-den is sent to the other prty ccording to the settings of "Alternte Imge") If n imge requesting the Cller ID is shown, mke the video cll gin sending the Cller ID. Interntionl video clls re vilble using "WORLD CALL", DoCoMo's interntionl telephone service. P58 The connection cnnot be estblished if the cll is mde to non video-phone or even if the other prty hs videophone, when the hndset is turned off or outside of the service re. If you mde cll to non video-phone, the cll is cncelled nd confirmtion screen whether to cll gin opens. Select "Reconnect s Voice Cll" to cll gin s voice cll. However, this my not occur if the destintion is ISDN synchronous 64K or PIAFS, ISDN videophone not supporting 3G-324M (s of November, 2006), or wrong number ws diled. Communiction chrges my pply. If n emergency cll such s 110, 119 or 118 ws mde from the FOMA hndset vi video cll nd the other prty does not hve video cll hndset, messge indicting the connection is unble ppers nd the cll cnnot be mde. In this cse, mke voice cll selecting "Reconnect s Voice Cll". i-mode mil or Messge R/F rriving during video cll is stored t the i-mode Center. SMS cn be received even during video cll. Digitl communiction chrges pply even if you send the lternte imge. If the hndset is not set to "DTMF ON", touch-tone signls cnnot be sent by pressing the Dil Key during Chrden video cll. P82 You cnnot switch to voice cll during video cll using this FOMA hndset. If chrge strts during cll, the chrge strt tone sounds from the Erpiece. During hndsfree cll, the chrge strt tone sounds from the Speker. When the bttery level becomes low during cll, the low bttery lert, "pico", sounds from the Erpiece every 30 seconds. You cn keep tlking, however, the cll will be terminted momentrily when the hndset power is utomticlly turned off. Mking/Answering Video Clls Mking Video Cll When video clls re not connected The following error messges indicte the reson: The messge displyed my not ccurtely describe the ctul sitution depending on the other prty's hndset or subscription to Network Services. Error Messge Video Cll Filed Check number, then redil. Number Busy Video Cll Filed Out of Service Are/Power Off. Video Cll Filed Reson The diled phone number is no longer in use. The line is busy or using pcket communiction. Select "Reconnect s Voice Cll" to switch to voice cll. The other prty is in the poor rdio wve reception level. Appers for the reson other thn the bove. Select "Reconnect s Voice Cll" to redil s voice cll. 81
Function Menu on the Connecting Screen/Video Cll Screen Mking/Answering Video Clls Defult Mirror: Off Lighting Conditions: Automtic Brightness: 3 Connecting screen (P81)/Video cll screen (P81) y h [Function] y Perform the following opertions Swp Use the multitsk function. P258 Off Imge/Cmer On Switch the imge to send between cmer imge nd lternte imge. Cll Hold Plce the cll on hold the ctive cll. Mking Video Cll Speker Off/Speker On Mke/cncel Hndsfree cll. The other prty's voice comes from the Speker during hndsfree cll. Swp View Switch between Min nd Sub windows. Externl View/Internl View Switch the cmer imge between Out nd In Cmers. Sttus Icons Off/Sttus Icons On Set Show/Hide of the disply of opertion icons displyed on the top of the Video cll screen. Setup Mirror : Set or cncel the mirror imge of the cmer imge. P88 Lighting Conditions : Adjust the color tone ccording to the light source of the cpturing loction. P88 Brightness Adjust the brightness of the screen during cll. P88 My Tel. Number Disply your phone number. Bluetooth Hndset The cll will be switched to connecting Bluetooth device/foma hndset. Diled Clls Disply Diled Clls. Received Clls Disply Received Clls. DTMF On/DTMF Off Allow/Prohibit touch-tone signls to be sent during video cll using Chr-den. Action List Open the Action list screen during video cll using Chr-den to select n ction nd operte the chrcter. P239 y Select n ction y h [Select] Chnge Action Switch between Full ction mode/prtil ction mode during video cll using Chr-den. P239 Off Imge The lternte imge sent to the other prty is either n imge/chr-den ccording to the settings in "Off Imge". 82
Cll Hold During hold, press o/t to send cmer imge or press i [Alternte Imge] to send the lternte imge fter cnceling the hold. Plcing Cll on Hold You cn plce the cll on hold or resume the ctive cll using n opertion icon. Video cll screen (P81) y Use s to select i [Hold] While the cll is plced on hold, the hold tone nd imge set in "Videocll Hold" under "Cll Hold Setup" re sent to the other prty. Press o/t to send the Cmer Imge to the other prty fter cnceling the hold. To send the lternte imge fter cnceling the hold, press s to select nd press i [Off Imge]. You cn plce video cll on hold lso by pressing C during video cll. Switching to Hndsfree Cll You cn set to her the other prty's voice from the Speker using n opertion icon. Video cll screen (P81) y Use s to select i [Speker On] y y Video cll screen (During cll hold) Mking/Answering Video Clls Receiving Video Cll To cncel the hndsfree function, press s to select [Speker Off]. nd press i Video cll screen (During hndsfree cll) The hndset is configured to use hndsfree when video cll is connected by defult. You cn chnge the setting in "SpekerPhone" in "Videocll Settings". While tlking using hndsfree, it is recommended tht you tlk holding the FOMA hndset within 50 cm from your mouth. If you set "Erpiece Volume" to "0", the other prty's voice is not herd from the Speker (Your voice is sent to the other prty). Receiving Video Cll A cll rrives The ringtone sounds. N/M: Stop the ringtone or vibrtion. p: Hold the incoming cll. P68 Incoming Video Cll screen Continued on the next pge 83
Mking/Answering Video Clls Receiving Video Cll b t/o Answer the cll. c To nswer the cll with sending the lternte imge to the cller Press i [Use Imge]. An imge/chr-den is sent to the other prty ccording to the settings in "Alternte Imge". p to terminte the cll When "Ring Lights" is set to other thn "None", the illumintion indictor flshes for incoming clls or Emil. When Record Messge is ctivted, the cller's video messge cn be recorded. P73 The incoming cll ctions such s ringtone or vibrtion vry depending on the settings in "Profile" or the settings sved in the Phonebook. P93, P112, P115 When Mnner Mode is ctivted, the ringtone does not sound. When Public Mode (Drive Mode) is set, the ringtone does not sound nd the Illumintion Indictor does not blink. When "Open To Answer" is set to "On", you cn nswer video cll by opening the hndset. Folding the FOMA hndset during cll termintes the cll. However, when using the miniusb Stereo Hedset M01 (optionl) etc., the cll will not be terminted when the hndset is closed. (The lternte imge or Chr-den is sent to the other prty ccording to the settings of "Alternte Imge") You cn set to dely the incoming cll ctions for cll mde from the other prty not sved in the Phonebook in "Ring Dely". When the Voicemil service is ctivted, SMS notifies you of new messge. Even if the Cll Forwrding service is ctivted, n incoming video cll is not forwrded if the forwrding destintion is not video-phone device supporting 3G-324M. Check the forwrding destintion device before setting the Cll Forwrding. i-mode mil or Messge R/F rriving during video cll is stored t the i-mode Center. SMS cn be received even during video cll. When the Public Mode (Drive Mode) is ctivted, incoming cll ctions such s sounding the ringtone or blinking the Illumintion Indictor will not tke plce. Also, even if cll rrives when the disply is turned off, the disply will not be turned on. You cnnot receive 32K video clls nd they re not recorded in Received Clls. If chrge strts during cll, the chrge strt tone sounds from the Erpiece. During hndsfree cll, the chrge strt tone sounds from the Speker. You cnnot switch to voice cll during video cll using this FOMA hndset. Function Menu on the Incoming Video Cll Screen Incoming Video Cll screen (P83) y h [Function] y Perform the following opertions Answer Receive video cll. Ignore Rejects n incoming cll nd hng up. Videocll Answer Hold Plce the cll on hold. Cll Forwrd Trnsfer video cll to the specified number. 84
Answer Hold Tone nd Imge set in "Videocll Answer Hold" under "Cll Hold Setup" in settings is sent to the cller. Cll Forwrd This option is not vilble unless you subscribe to the Cll Forwrding service nd you specify forwrding destintion. Chr-den You cn send chrcter of Chr-den insted of cmer imge to the other prty. The movement of the chrcter cn be controlled using keys. Mking/Answering Video Clls Mking Cll Using Chr-den c y (Dtbox) y "Chr-den" y Select folder y c Select Chr-den y h [Function] y b "Enter V-Phone No."y Perform the following opertions Chr-den Chr-den Video cll screen (While using Chr-den) BVIG Enter Number Mke cll by entering phone number directly. y Enter phone number y t Phonebook y Select Phonebook entry y c Received Clls Select phone number from Received Clls entry. y Select Received Clls entry y c Diled Clls Select phone number from Diled Clls entry. y Select Diled Clls entry y c Answering Cll Using Chr-den Set "Alternte Imge" to "Chr-den" in dvnce. i [Use Imge] when cll rrives The cll is connected nd the Chr-den chrcter is sent to the other prty. Continued on the next pge 85
Mking/Answering Video Clls When selecting phone number from Phonebook entry, if the selected entry hs multiple phone number, use s to disply the phone number to dil nd press c. Press h [Function] during video cll to select "Action List" to open the ction list screen. Select n ction nd press h [Select] to perform the ction. During video cll, press h [Function] nd select "Chnge Action", or use s to select nd press i [Prtil Action]/i [Full Action] to switch between Full ction mode nd Prtil ction mode. Press 0-9 during video cll to control the chrcter. For opertions on the Action list screen or Chr-den, or detils of Action modes, see "Chr-den" (P239). When "DTMF On" is set, Chr-den cnnot be controlled by pressing the Dil Keys. Setting the Imge to Send to the Other Prty Setting the Imge to Send to the Other Prty Switching between Cmer Imge nd Alternte Imge Video cll screen (P81) y Use s to select y i [Off Imge] The lternte imge is sent to the other prty. To switch to Cmer imge, press s to select nd press i [Cmer On]. Video cll screen (While sending cmer imge) You cn lso press t to switch between cmer imge nd lternte imge. The lternte imge or Chr-den is sent to the other prty ccording to the settings of "Alternte Imge". Video cll screen (While sending lterntive imge) Switching between the In nd Out Cmers Video cll screen (P81) y Use s to select (Cmer) y i [Ext. View] The Out Cmer imge is sent to the other prty. To switch to the In Cmer, press s to select nd press i [Int. View]. Video cll screen (While using the In Cmer) Video cll screen (While using the Out Cmer) This function is vilble only when the cmer imge is being sent to the other prty. Chnged settings will not be retined fter the cll. 86
SpekerPhone Setting Hndsfree for Video Clls Defult On You cn set whether the other prty's voice to come from the Speker using Hndsfree or from the Erpiece when video cll is connected. c y (Settings) y "In-Cll Setup" y "Videocll Settings" y "SpekerPhone" y "On"/"Off" Setting Displyed Imge during Video Cll Mking/Answering Video Clls Switching between Min nd Sub windows Defult Min window: Other prty's imge Sub window: Your imge Video cll screen (P81) y Use s to select y i [Swp View] The other prty's imge is displyed on the sub window nd your imge on the min window. To restore the defult min window disply, press s to select nd press i [Swp View]. Video cll screen (min window: the other prty, sub window: your imge) Video cll screen (min window: your imge, sub window: the other prty) SpekerPhone Chnged settings will not be retined fter the cll. Showing/Hiding Icons t the Top of the Screen Defult Sttus On This function is vilble only during response hold, cll on hold or sending n imge using the lternte imge. Response Hold screen (P68)/During cll hold screen (P83)/While sending lternte imge (P86) y Use s to select y i [Sttus Off] Icons t the top of the screen will be hidden. To show icons, press s to select nd press i [Sttus On]. Chnged settings will not be retined fter the cll. 87
Mking/Answering Video Clls Chnging the Cmer Imge to Mirror Imge Defult Off When setting to "On", the imge is displyed with the right nd left inverse (Mirror On), nd the imge to be sent to the other prty is lso displyed with the right nd left inverse (Mirror On). Video cll screen (P81) y h [Function] y "Setup" y "Mirror" y "Off"/"On" y i [Return] Setting Displyed Imge during Video Cll Setting the Lighting Conditions Defult Automtic You cn djust imges to nturl color tones ccording to the light source of the cpturing loction. Video cll screen (P81) y h [Function] y "Setup" y "Lighting Conditions" y Perform the following opertions Automtic Adjust utomticlly. Sunny Suitble for outdoors in fine wether. Cloudy Suitble for outdoors in cloudy wether. Video cll screen (Mirror On) Video cll screen (Mirror Off) Indoor (Home) Suitble for indoors under incndescent lighting. Indoor (Office) Suitble for indoors under florescent lighting. Night Suitble for night. b i [Return] Adjusting the Brightness of the Screen Defult 3 The brightness cn be djusted to 7 levels from 0 to 6. 88
Video cll screen (P81) y h [Function] y "Brightness" The Brightness djustment screen opens. b Use /Dil Keys to djust the brightness If no ction is tken for pproximtely 2 seconds, the Brightness djustment screen closes utomticlly nd the brightness is set. Chnged settings will not be retined fter the cll. Videocll Answer Hold Setting the Answer Hold Tone nd Imge Mking/Answering Video Clls Defult Answer Hold Tone: Jpnese Answer Hold Imge: h_img You cn set Answer Hold Tone tht the other prty on hold hers nd the imges to disply. cy (Settings) y "In-Cll Setup" y "Cll Hold Setup" y"videocll Answer Hold" y Perform the following opertions Answer Hold Tone Jpnese: Set nswer hold tone to Jpnese. English : Set nswer hold tone to English. Videocll Answer Hold Answer Hold Imge y Select n imge yh [Select] Answer Hold Imge Only pre-instlled imge for response hold/cll on hold cn be sved. Answer Hold Tone The nswer hold tone is plyed s follows: Jpnese English I cn't tke your cll now. Plese hold the line for moment or cll bck lter. Thnk you. 89
Mking/Answering Video Clls Videocll Hold Videocll Hold Setting Video Cll Hold Tone nd Imge Defult You cn set Videocll Hold Tone nd imges tht is displyed on your hndset nd other prty's hndset while cll is on hold. c y (Settings) y "In-Cll Setup" y "Cll Hold Setup" y "Videocll Hold" y Perform the following opertions Videocll Hold Tone y "Melody1"/"Melody2" Videocll Hold Imge y Select n imge yh [Select] Videocll Hold Imge Videocll Hold Tone: Melody1 Videocll Hold Imge: ch_img Only pre-instlled imge for response hold/cll on hold cn be sved. Videocll Settings Chnging the Video Cll Settings Setting Alternte Imge/Chr-den Defult bunbun (Dimo) You cn select nd set n imge or Chr-den s the imge to be sent to the other prty when switching to the Alternte Imge. c y (Settings) y "In-Cll Setup" y "Videocll Settings" y "Alternte Imge" y Perform the following opertions My Pictures Select from imges sved in "My Pictures". y Select folder y c y Select n imge y c Chr-den Select from imges sved in "Chr-den". y Select folder y c y Select Chr-den y c The set imge or Chr-den is displyed s its file nme. My Pictures Only JPEG formtted imge files cn be set. Imges restricted from redistribution cnnot be set. 90