AIR CONDITIONER (SPLIT TYPE)

Transcription

1 OWNER S MANUAL AIR CONDITIONER (SPLIT TYPE) CLIMATISEUR (TYPE SEPARE) KLIMAGERÄT (GETEILTE AUSFÜHRUNG) CONDIZIONATORE D ARIA (TIPO SPLIT) ACONDICIONADOR DE AIRE (TIPO SEPARADO) ΚΛΙΜΑΤΙΣΤΙΚΗ ΜΟΝΑ Α ( ΙΑΙΡΟΥΜΕΝΟΥ ΤΥΠΟΥ) AR CONDICIONADO (TIPO SPLIT) AIRCONDITIONER (TWEEDELIG TYPE) КОНДИЦИОНЕР (РАЗДЕЛИТЕЛЬНЫЙ ТИП) Indoor Unit Unité intérieure Innenrumgerät Unità intern Unidd interior Εσωτερική µονάδα Unidde interior Binnenpprt Внутренний блок For generl public use Pour utilistion grnd public Für llgemeine Verwendung Per l uso in generle Pr el uso público generl Για γενική δηµόσια χρήση Pr utilizção gerl Voor lgemeen publiek gebruik Для общего бытового использования RAS-B10SKVP-E RAS-B13SKVP-E RAS-B16SKVP-E RAS-M10SKCVP-E RAS-M13SKCVP-E RAS-M16SKCVP-E Outdoor Unit Unité extérieure Außengerät Unità estern Unidd exterior Εξωτερική µονάδα Unidde exterior Buitenpprt Наружный блок RAS-10SAVP-E RAS-13SAVP-E RAS-16SAVP-E RAS-M14GAV-E RAS-M18GAV-E RAS-M14GACV-E RAS-M18GACV-E Thnk you for purchsing this TOSHIBA Air Conditioner. Plese red this owner s mnul crefully before using your Air Conditioner. NEDERLANDS

2 CONTENTS ACCESSORIES... 1 SAFETY PRECAUTIONS... 1 NAMES OF PARTS... 3 NAMES AND FUNCTIONS OF INDICATORS AND CONTROLS ON INDOOR UNIT... 3 REMOTE CONTROLLER AND ITS FUNCTIONS... 4 NAMES AND FUNCTIONS OF INDICATORS ON REMOTE CONTROLLER... 5 PREPARATION AND CHECK BEFORE USE... 5 USING THE REMOTE CONTROLLER... 7 AUTOMATIC OPERATION... 8 AUTOMATIC OPERATION (AUTO CHANGEOVER)... 8 COOLING/HEATING OPERATION... 9 DRY OPERATION... 9 FAN ONLY OPERATION (cooling-only models only)... 9 PURE OPERATION Hi POWER OPERATION , 3, 5, 9H OFF TIMER TIMER OPERATION MEMORY/MY COMFORT OPERATION ADJUSTING AIR FLOW DIRECTION AUTO RESTART OPERATION HOW THE AIR CONDITIONER WORKS TEMPORARY OPERATION CLEANING OPERATION USUAL MAINTENANCE SPECIAL MAINTENANCE AIR CONDITIONER OPERATION AND PERFORMANCE TROUBLESHOOTING SPECIFICATIONS TROUBLESHOOTING (Remote Controller) About indoor unit nd outdoor unit combintions The RAS-B10SKVP-E, RAS-B13SKVP-E nd RAS-B16SKVP-E indoor units cn be connected to single outdoor unit or multi outdoor unit. For single unit connection Use the following combintions. RAS-B10SKVP-E/RAS-10SAVP-E RAS-B13SKVP-E/RAS-13SAVP-E RAS-B16SKVP-E/RAS-16SAVP-E For multi unit connection Refer to the specifictions included with the multi outdoor unit. The RAS-M10SKCVP-E, RAS-M13SKCVP-E nd RAS-M16SKCVP-E indoor units cn be connected to multi outdoor unit. Refer to the specifictions included with the multi outdoor unit. About indoor unit model nmes Het pump models (RAS-B10SKVP-E, RAS-B13SKVP-E nd RAS-B16SKVP-E) These indoor units cn perform both cooling nd heting opertion. Cooling-only models (RAS-M10SKCVP-E, RAS-M13SKCVP-E nd RAS-M16SKCVP-E) These indoor units re cooling-only models, nd cnnot perform heting opertion. i

3 ACCESSORIES Remote controller Remote controller holder Btteries (two) SAFETY PRECAUTIONS FRANÇAIS DANGER DO NOT ATTEMPT TO INSTALL THIS UNIT BY YOURSELF. THIS UNIT REQUIRES A QUALIFIED INSTALLER. DO NOT ATTEMPT TO REPAIR THE UNIT BY YOURSELF. THIS UNIT SHOULD BE PROFESSIONALLY REPAIRED. OPENING OR REMOVING THE COVER WILL EXPOSE YOU TO DANGEROUS VOLTAGES. TURNING OFF THE POWER SUPPLY WILL NOT PREVENT POTENTIAL ELECTRIC SHOCK. WARNING INSTALLATION WARNINGS Be sure to sk deler or store specilized in electric work to instll the ir conditioner. If the ir conditioner is improperly instlled by yourself, it cn cuse some problems such s wter leks, electric shock, fire, nd so on. Be sure to lwys ground the ir conditioner. Do not connect the ground wire to gs pipes, wter pipes, lightning rods or ground wires of telephones. If the ir conditioner is improperly grounded, it cn cuse n electric shock. CAUTION TO DISCONNECT THE APPLIANCE FROM THE MAIN POWER SUPPLY A switch or circuit breker tht cn disconnect ll poles must be included in the fixed wiring. Be sure to use n pproved circuit breker or switch. OPERATION WARNINGS Avoid cooling the room too strongly or exposing yourself to cool wind for long time becuse it cn be detrimentl to your helth. Never insert fingers or sticks into the ir outlet nd ir inlet to void getting injured nd dmging the mchine becuse there re fns running t high speed inside both the ir inlet nd ir outlet. When you notice something unusul with the ir conditioner (such s burning smell or wek cooling power), immeditely turn off the min switch nd the circuit breker from the min power supply to stop the ir conditioner, nd contct the deler. If the ir conditioner is operted continuously when something is wrong, it cn cuse mchine filure, electric shock, fire, nd so on. Do not spill wter or other liquid on the indoor unit. If the unit is wet, it cn cuse n electric shock. MOVEMENT AND REPAIR WARNINGS Do not ttempt to move or repir the unit by yourself. Do not disssemble the unit. As there is high voltge inside the unit, you my receive n electric shock. Alwys sk the deler to move the ir conditioner for re-instlling it in nother plce. If it is improperly instlled, it cn cuse electric shock or fire. Whenever the ir conditioner needs repirs, request repirs from the deler. If the ir conditioner is repired improperly it cn cuse n electric shock or fire. ###SW### PORTUGUÊS ΕΛΛΗΝΙΚΗ ESPAÑOL ITALIANO DEUTSCH 1 EN ###RU###

4 . CAUTION INSTALLATION CAUTIONS Securely ly the drin hose for the best drining results. Incorrect dringe cn cuse flooding in the house nd furniture to get wet. Be sure to connect the ir conditioner to dedicted power supply hving the rted voltge. Otherwise, the unit cn brek down or cuse fire. Do not instll the unit in plce where inflmmble gs cn lek. A fire cn result if inflmmble gs ccumultes round the unit. The indoor unit shll be instlled so tht the top of the indoor unit is t lest 2 m in height. Also, void putting nything on the top of the indoor unit. OPERATION CAUTIONS Crefully red this mnul before strting the ir conditioner. The mnul includes lot of importnt informtion for dily opertion. Do not use this ir conditioner for other purposes such s preserving food, precision instruments, rt objects, breeding nimls, or growing potted plnts. Do not instll this ir conditioner in specil-purpose room such s ship or ny kind of vehicle. Doing so could hrm mchine performnce. Avoid exposing potted plnts nd nimls to wind from the ir conditioner becuse it hrms their helth nd growth. When the ir conditioner is operted in close proximity to combustion device, py creful ttention to ventiltion nd let fresh ir into the room. Poor ventiltion cn cuse n oxygen shortge. When the ir conditioner is used in closed room, py creful ttention to the ventiltion of the room. Poor ventiltion cn cuse n oxygen shortge. Do not touch the opertion buttons with wet hnds. Doing so could cuse n electric shock. Do not plce ny combustion device in plce where it is directly exposed to wind from the ir conditioner. Doing so could cuse incomplete combustion. When the ir conditioner is not to be used for n extended period of time, turn off the min switch or the circuit breker for dded sfety. Disconnecting from the power supply protects the unit from lightning nd power surges. Do not put continer with wter such s vse on the unit becuse wter cn enter into the unit nd cuse n electric shock due to deteriortion in the electric insultion. Check the concrete blocks underneth the outdoor unit occsionlly. If the bse is left dmged or deteriorted, the unit cn topple over nd could possibly cuse n injury. Do not wsh the unit with wter. This could cuse n electric shock. Do not use lcohol, benzene, thinner, glss clener, polishing powder or other solvent for clening the unit becuse they cn deteriorte nd dmge the ir conditioner. Before clening the unit, be sure to turn off the min switch or circuit breker to prevent injuries from the electric fn running inside. For detils of the clening method, refer to USUAL MAINTENANCE nd SPECIAL MAINTENANCE on pges 19 to 22. Do not put nything on or step on the indoor unit nd outdoor unit. If you do so, it cn topple over nd cuse n injury. To llow the ir conditioner to operte t mximum performnce, operte within the operting temperture rnge specified in the instructions. Filure to do so cn cuse mlfunction, brek down, or wter to lek from the unit. It is recommended tht mintennce be performed by specilist when the unit hs been operted for long time. EN 2

5 NAMES OF PARTS Outdoor unit Refrigernt connecting pipe nd electric wires b Air inlet (Side nd rer) c Air outlet b Indoor unit d Room temperture sensor e Front pnel f Air inlet grille g Air filter h Air outlet i Horizontl ir flow louver Locted t the bck of the verticl ir flow louver. j Verticl ir flow louver k Disply pnel l Infrred signl receiver m Remote controller n Plsm pure filter m e f c g d FRANÇAIS DEUTSCH i h n k l j ITALIANO NAMES AND FUNCTIONS OF INDICATORS AND CONTROLS ON INDOOR UNIT Disply pnel The operting sttes re shown below. RESET button b FILTER indictor (Ornge) c TIMER indictor (Yellow) d PURE indictor (Blue) e OPERATION indictor (Green) The opertion indictors flsh rpidly (5 times per second) when sfety protection feture is ctivted. f S.CLEAN indictor (Green) When the unit shuts down fter hving operted for 10 or more minutes in the cooling or dry mode, the clening opertion is strted utomticlly, nd the S.CLEAN indictor turns on. RESET button The RESET button hs the following two functions. Reset function Use when the FILTER indictor (ornge) is on. ( see pge 20.) Temporry opertion function Use when you misplce or lose the remote controller, or when its btteries re used up. ( see pge 18.) b c d e f ###SW### PORTUGUÊS ΕΛΛΗΝΙΚΗ ESPAÑOL 3 EN ###RU###

6 REMOTE CONTROLLER AND ITS FUNCTIONS Infrred signl trnsmitter Trnsmits signls to the indoor unit. b button Press the button to strt opertion. (A receiving beep is herd.) Press the button gin to stop opertion. (A receiving beep is herd.) If no receiving sound is herd from the indoor unit, press the button gin. c Mode select button (MODE) Press this button to select mode. Ech time you press the button, the modes cycle in order from A: Auto chngeover control, : COOL, : DRY, : HEAT (het pump models only), : FAN ONLY (cooling-only models only) nd bck to A. (A receiving beep is herd.) d Temperture button ( TEMP) e f g h i j k l m.. The temperture setting is rised to 30 C.... The temperture setting is lowered to 17 C. (A receiving beep is herd.) Fn speed button (FAN) Press this button to select the fn speed. When you select AUTO, the fn speed is utomticlly djusted ccording to the room temperture. You cn lso mnully select the desired fn speed from five vilble settings. (LOW, LOW+, MED, MED+, HIGH ) (A receiving beep is herd.) Auto louver button (SWING) Press this button to swing the louver. (A receiving beep is herd.) Press the button gin to stop the louver from swinging. (A receiving beep is herd.) ( see pge 15.) Set louver button (FIX) Press this button to djust the ir flow direction. (A receiving beep is herd.) ( see pge 15.) ON timer button (ON) Use this button to chnge the clock nd ON timer times. To move up the time, press of the ON ON button. To move down the time, press of the ON ON button. OFF timer button (OFF) Use this button to chnge the OFF timer times. To move up the time, press of the OFF OFF button. To move down the time, press of the OFF OFF button. Reserve button (SET) Press this button to store the time settings. (A receiving beep is herd.) Cncel button (CLR) Press this button to cncel the ON timer nd OFF timer. (A receiving beep is herd.) High power button (Hi POWER) Press this button to strt high power opertion. ( see pge 17.) Memory button (MEMO) Press this button to redy for storing the settings. Hold down the button for 3 seconds or more to store the setting indicted on the remote controller nd until the mrk is displyed. ( see pge 14.) n o p q r Automtic opertion button (AUTO) Press this button to operte the ir conditioner utomticlly. (A receiving beep is herd.) ( see pge 17.) SLEEP MODE button Press this button to strt sleep mode. ( see pge 17.) MY COMFORT button Press this button to operte the ir conditioner ccording to the settings stored using the MEMO button. ( see pge 14.) PURE button (PURE) Press this button to strt the electricl ir purifying opertion. Press the button gin to stop opertion. Off timer button (OFF) Press this button to strt the OFF timer opertion. You cn select the OFF timer time from mong four settings (1, 3, 5 or 9 hours). q d c b l g f k h n p o m e r j i EN 4

7 NAMES AND FUNCTIONS OF INDICATORS ON REMOTE CONTROLLER Disply All indictors, except for the clock time indictor, re displyed by pressing the button. Trnsmission mrk This trnsmission mrk ( ) indictes when the remote controller trnsmits signls to the indoor unit. b Mode indictor Indictes the current opertion mode. Het pump models c d b hj (AUTO: Automtic control, A: Auto chngeover control, : COOL, : DRY, :HEAT) Cooling-only models (AUTO: Automtic control, A: Auto chngeover control, : COOL, : DRY, : FAN ONLY) c Temperture indictor Indictes the temperture setting (17 C to 30 C). d PURE indictor Shows tht the electricl ir purifying opertion is in progress. e f g FAN speed indictor Indictes the selected fn speed. AUTO or one of five fn speed levels (LOW, LOW+, MED, MED+, HIGH ) cn be shown. Indictes AUTO when the operting mode is either AUTO or : DRY. TIMER nd clock time indictor The time setting for timer opertion or the clock time is indicted. The current time is lwys indicted except during TIMER opertion. Hi POWER indictor Indictes when Hi POWER opertion strts. Press the Hi POWER button to strt nd press it gin to stop opertion. h (MEMORY) indictor Flshes for 3 seconds when the MEMO button is pressed during opertion. The mrk is shown when holding down the button for 3 seconds or more while the mrk is flshing. Press nother button to turn off the mrk. i SLEEP MODE indictor Indictes when the SLEEP MODE is ctivted. Press the SLEEP MODE button to strt nd press it gin to stop opertion. j A. B chnge indictor remote controller When the remote controller switching function is set, B ppers in the remote controller disply. (When the remote controller setting is A, there is no indiction t this position.) Remote controller switching function If two indoor units re instlled in the sme room or djoining rooms, both units my strt nd stop t the sme time when the remote controller is operted. This cn be prevented by setting the switching function so tht ech indoor unit is operted only by the corresponding remote controller. To use the remote controller switching function, contct the ir conditioner deler or the instlltion compny. PREPARATION AND CHECK BEFORE USE Loding the remote controller btteries Remove the cover, nd insert the btteries. b Press the RESET button. The clock time indictor flshes. Press the RESET button using n object with nrrow tip. c Rettch the cover. b i g e f In the illustrtion, ll indictors re shown for purposes of explntion. During opertion, only the relevnt indictors re shown on the remote controller. ###SW### PORTUGUÊS ΕΛΛΗΝΙΚΗ ESPAÑOL ITALIANO DEUTSCH FRANÇAIS 5 EN ###RU###

8 Btteries To replce the btteries, use two new btteries (AAA type). The btteries will lst bout one yer under norml usge. Replce the btteries if there is no receiving beep from the indoor unit or when the ir conditioner cnnot be operted using the remote controller. To void mlfunctions due to bttery lekge, remove the btteries when not using the remote controller for over one month. Slide off the cover while pressing the sides. Bttery replcement Be creful not to reverse the (+) position nd the ( ) position. Setting the clock Before you strt operting the ir conditioner, set the clock of the remote controller using the procedures given in this section. The clock pnel on the remote controller will indicte the time regrdless of whether the ir conditioner is in use or not. Initil setting When btteries re inserted in the remote controller, the clock pnel displys AM 0:00 nd flshes. ON ON button Press the ON ON button to set the current time. Ech press of the ON button chnges the time in one minute increments. Holding down the ON button chnges the time in ten minute increments. b SET SET button Press the SET SET button. The current time is displyed nd the clock strts. b Adjusting the clock CLOCK button Press the CLOCK button. The clock time indictor flshes. b ON ON button Press the ON ON button to set the current time. Ech press of the ON button chnges the time in one minute increments. Holding down the ON button chnges the time in ten minute increments. c SET SET button Press the SET SET button. The current time is displyed nd the clock strts. Push CLOCK b c EN 6

9 Check tht the ir filter nd the plsm pure filter re correctly instlled Press the plsm pure filter until the projections on both sides re fully inserted into the holders (tbs). If the instlltion is not correct, the FILTER indictor (ornge) my come on. Projections USING THE REMOTE CONTROLLER FRANÇAIS CAUTION The ir conditioner will not operte if curtins, doors or other objects block the signls from the remote controller to the indoor unit. Be creful tht liquids do not spill onto the remote controller. Do not expose the remote controller to direct sunlight or het. If the infrred signl receiver on the indoor unit is exposed to direct sunlight, the ir conditioner my not function properly. Use curtins to prevent sunlight from reching the receiver. Signls my not be properly received, if the room using the ir conditioner hs fluorescent lighting with electronic strters. If you pln to use fluorescent lmps, consult with your locl deler. If other electricl pplinces re ctivted by the remote controller, move these pplinces or consult with your locl deler. Loction of the remote controller Keep the remote controller where its signls cn rech the receiver of the indoor unit ( distnce of up to 7 m is llowed). When you select timer opertion, the remote controller utomticlly trnsmits signl to the indoor unit t the specified time. If you keep the remote controller in loction where proper signl trnsmission is blocked, time lg of up to 15 minutes my occur. Remote controller holder Instlling the remote controller holder Before you ctully instll the remote controller holder on wll or pillr, check whether the remote controller signls cn be received by the indoor unit. Mounting nd removing the remote controller To mount the remote controller, hold it prllel to the remote controller holder nd push it in fully. To remove the remote controller, slide the remote controller upwrds nd out from the holder. 7 m ΕΛΛΗΝΙΚΗ ESPAÑOL ITALIANO DEUTSCH ###SW### PORTUGUÊS 7 EN ###RU###

10 AUTOMATIC OPERATION When you set the ir conditioner to AUTO mode, it utomticlly selects cooling, heting (het pump models only), or fn only opertion depending on the room temperture. ( see pge 17.) The fn speed nd louver re lso utomticlly controlled. Strt button Press this button to strt the ir conditioner. b AUTO button (AUTO) Press AUTO button. c Temperture button ( TEMP) Set the desired temperture. The OPERATION indictor (green) on the disply pnel of the indoor unit lights. The operting mode is selected ccording to the room temperture nd opertion strts fter pproximtely 3 minutes. If the AUTO mode is uncomfortble, you cn select the desired conditions mnully. The fn speed nd louver position cn be chnged, nd MODE is lso chnged from AUTO to A when the fn speed or louver position is chnged. The fn speed indictor is lso shown. Stop button Press this button gin to stop the ir conditioner. b c AUTOMATIC OPERATION (AUTO CHANGEOVER) When you set the ir conditioner to A mode or switch over from AUTO opertion becuse of chnge in settings, the ir conditioner utomticlly selects cooling, heting (het pump models only), or fn only opertion depending on the room temperture. ( see pge 17.) Strt button Press this button to strt the ir conditioner. b Mode select button (MODE) Select A. c Temperture button ( TEMP) Set the desired temperture. d Fn speed button (FAN) Select one of AUTO LOW, LOW+, MED, MED+, HIGH. The OPERATION indictor (green) on the disply pnel of the indoor unit lights. The operting mode is selected ccording to the room temperture nd opertion strts fter pproximtely 3 minutes. The temperture, fn speed nd louver position cn be chnged. You cn select the desired conditions mnully. Stop button Press this button gin to stop the ir conditioner. c b d EN 8

11 COOLING/HEATING OPERATION Strt button Press this button to strt the ir conditioner. b Mode select button (MODE) Select COOL or HEAT (het pump models only). c Temperture button ( TEMP) Set the desired temperture. d Fn speed button (FAN) Select one of AUTO LOW, LOW+, MED, MED+, HIGH. The OPERATION indictor (green) on the disply pnel of the indoor unit turns on. Opertion strts fter pproximtely 3 minutes. Stop button Press this button gin to stop the ir conditioner. c b d FRANÇAIS DEUTSCH Heting opertions cnnot be performed by cooling-only model. DRY OPERATION Strt button Press this button to strt the ir conditioner. b Mode select button (MODE) Select DRY. c Temperture button ( TEMP) Set the desired temperture. The fn speed setting is fixed to AUTO nd the AUTO is displyed. The OPERATION indictor (green) on the disply pnel of the indoor unit turns on, nd opertion strts fter pproximtely 3 minutes. Stop button Press this button gin to stop the ir conditioner. c b ITALIANO ESPAÑOL ΕΛΛΗΝΙΚΗ FAN ONLY OPERATION (cooling-only models only) Strt button Press this button to strt the ir conditioner. b Mode select button (MODE) Select FAN ONLY. c Fn speed button (FAN) Select one of AUTO LOW, LOW+, MED, MED+, HIGH. The OPERATION indictor (green) on the disply pnel of the indoor unit turns on. Opertion will strt immeditely. The : FAN ONLY mode does not control the temperture. Stop button Press this button gin to stop the ir conditioner. b c 9 EN PORTUGUÊS ###SW### ###RU###

12 PURE OPERATION Press this button to strt the electricl ir purifying opertion. During ir conditioner opertion PURE button PURE opertion strts by pressing this button. The PURE indictor (blue) on the disply pnel of the indoor unit turns on. Plsm pure filter is ctivted. To stop only PURE opertion PURE button PURE opertion stops by pressing this button. The PURE indictor (blue) on the disply pnel of the indoor unit turns off. Plsm pure filter is dectivted. To stop ir conditioner opertion t the sme time button Air conditioner opertion nd PURE opertion stop by pressing this button. The OPERATION indictor (green) nd PURE indictor (blue) on the disply pnel of the indoor unit turn off. CAUTION When the button is pressed the next time, opertion strts with the combined ir conditioner nd PURE opertion. During the combined ir conditioner nd PURE opertion, ir conditioner opertion only cnnot be stopped. When the ir conditioner is stopped PURE button PURE opertion strts by pressing this button. The PURE indictor (blue) on the disply pnel of the indoor unit turns on. INFORMATION During PURE opertion, smll mount of ozone is produced, nd you might notice the smell. When the ir flow is utomtic, it chnges between LOW nd MED+. LOW opertion is performed when the indoor ir becomes clen. During opertion, the position of the verticl ir flow louvers my chnge if the room temperture is low. Opening the ir inlet grille during PURE opertion sometimes turns on the FILTER indictor (ornge). In this cse, stop PURE opertion (stop the ir conditioner if it is lso operting), nd then close the ir inlet grille. The FILTER indictor (ornge) turns on fter PURE opertion is performed for bout 1000 hours. When the indictor turns on, clen the plsm pure filter. ( see pge 21.) EN 10

13 . Hi POWER OPERATION High power (Hi POWER) The Hi POWER (high power opertion) mode utomticlly controls room temperture, ir flow nd the opertion mode so tht the room is quickly cooled in summer nd wrmed in winter. ( see pge 17.) Setting Hi POWER mode Hi POWER button Press the Hi POWER button. The Hi POWER mrk on the remote controller is shown. Cnceling Hi POWER mode Hi POWER button Press the Hi POWER button once gin. The Hi POWER mrk on the remote controller turns off. FRANÇAIS CAUTION The Hi POWER mode cnnot be ctivted during DRY opertion nd FAN ONLY opertion (cooling-only models only). DEUTSCH 1, 3, 5, 9H OFF TIMER The ir conditioner stops fter operting for the set time (1, 3, 5 or 9 hours). OFF button Press the OFF button (during opertion). There is short beep nd the timer indictor comes on. The time t which the ir conditioner will stop is indicted on the remote controller disply (1H: bout 1 hour fter the current time). Press the button gin while 1H is displyed (bout 3 seconds) to chnge to the 3H indictor, press gin to chnge to the 5H indictor, nd press gin to chnge to the 9H indictor. After selecting the time you wnt, do not press this button gin. (When the 1H, 3H, etc. indictor goes off the timer is set.) b CLR button Press the CLR button to cncel the timer. The timer is cnceled but the ir conditioner continues to operte. The 1, 3, 5 or 9H OFF timer opertion is lso cnceled if the OFF button is pressed fter mking setting. INFORMATION Clening opertion strts when the time of the 1, 3, 5 or 9H OFF timer is reched. (Clening opertion is not performed during heting opertion or the PURE opertion.) When using in combintion with the ON timer, first set the 1, 3, 5 or 9H OFF timer nd then set the ON timer. If the OFF button is pressed while the ON (OFF) timer hs been set, the ON (OFF) timer is cnceled nd only the 1, 3, 5 or 9H OFF timer is set. b PORTUGUÊS ΕΛΛΗΝΙΚΗ ESPAÑOL ITALIANO ###SW### 11 EN ###RU###

14 . TIMER OPERATION ON timer nd OFF timer Setting the ON Timer ON ON button Press the ON button. Set the timer to the desired time. Ech time the ON button is pressed, the time chnges in ten minute increments. Holding down the ON button chnges the time in one hour increments. b SET SET button Press the SET SET button to set the timer. The timer time is displyed, nd the timer strts. c CLR CLR button Press the CLR Setting OFF Timer OFF OFF button Press the OFF ON CLR OFF button to cncel the timer setting. button. Set the timer to the desired time. Ech time the OFF button is pressed, the time chnges in ten minute increments. Holding down the OFF button chnges the time in one hour increments. b SET SET button Press the SET SET button to set the timer. The timer time is displyed, nd the timer strts. c CLR CLR button Press the CLR CLR button to cncel the timer setting. b c CAUTION When you select timer opertion, the remote controller utomticlly trnsmits the timer signl to the indoor unit t the specified time. Therefore, keep the remote controller in loction where it cn trnsmit the signl to the indoor unit properly. If you do not press the SET SET button within 30 seconds fter setting the time, the setting will be cncelled. Once you select timer opertion mode, the settings re sved in the remote controller. Therefter, the ir conditioner will strt operting under the sme conditions s you pressed the ON or OFF button on the remote controller. You cnnot set the timer when the clock disply is flshing. Follow the instructions in the section Setting the clock on pge 6 to set the clock, nd then set the timer. EN 12

15 Combined timer (Setting the ON nd OFF timers simultneously) OFF timer > ON timer (Opertion > Stop > Opertion) This feture is useful when you wnt to stop the ir conditioner fter you go to sleep, nd strt it gin in the morning when you wke up or you return home. Exmple: To stop the ir conditioner nd strt it gin next morning Setting combined TIMER (1) Press the OFF OFF button to set the OFF timer. (2) Press the ON ON button to set the ON timer. Opertion Stop Opertion gin FRANÇAIS (3) Press the SET SET button. ON timer > OFF timer (Stop > Opertion > Stop) You cn use this setting to strt the ir conditioner when you wke up nd stop it when you leve the house. Exmple: To strt the ir conditioner the next morning nd stop it DEUTSCH Setting combined TIMER (1) Press the ON ON button to set the ON timer. (2) Press the OFF OFF button to set the OFF timer. (3) Press the SET SET button. Stop Opertion Stop ITALIANO The ON or OFF timer function tht is closer to the current time is ctivted first. If the sme time is set for both ON nd OFF timers, no timer opertion is performed. Also, the ir conditioner my stop operting. CAUTION Approximtely 3 seconds lter, the remote controller will trnsmit the signl to the indoor unit nd receiving beep will sound from the indoor unit fter you press the SET SET button. ESPAÑOL Dily combined timer (setting the ON nd OFF timers simultneously nd ctivting every dy) This feture is useful when you wnt to use the combined timers t the sme time every dy. Setting combined TIMER (1) Press the ON ON button to set the ON timer. (2) Press the OFF OFF button to set the OFF timer. (3) Press the SET SET button. (4) After step (3), n rrow mrk ( or ) flshes for bout 3 seconds. Press the SET SET button during this flshing. Both rrows (, ) re shown while the dily timer is ctivted. Cncelling timer opertion Press the CLR CLR button. Clock disply During TIMER opertion (ON-OFF, OFF-ON, OFF timer), the clock time indictor is not shown so the setting time cn be displyed. To view the current time, press the SET button briefly nd the current time will be displyed for bout 3 seconds. c b ΕΛΛΗΝΙΚΗ PORTUGUÊS ###SW### 13 EN ###RU###

16 MEMORY/MY COMFORT OPERATION Use the MEMO button to store frequently used opertion setting for convenience. Strt the ir conditioner in the opertion mode tht you wnt the remote controller to store. Press the button s shown below while the ir conditioner is operting. MEMO button Press this button briefly to redy for storing the setting. All the icons currently shown flsh, except for the clock time indictor nd mode indictor. b MEMO button Hold down the MEMO button for 3 seconds or more while the indictor flshes. The mrk is shown nd the setting is stored. If you do not press the MEMO button within 3 seconds or if you press nother button, the MEMORY setting is cncelled. Opertion modes which cn be stored with the MEMO button re MODE, Temperture, FAN, TIMER nd Hi POWER. b To operte the ir conditioner with the setting stored using the MEMO button. MY COMFORT button Press the MY COMFORT button. The setting stored with the MEMO button will be shown nd the ir conditioner opertes bsed on the setting. (A): When the MY COMFORT button is pressed while opertion is stopped The OPERATION indictor (green) on the disply pnel of the indoor unit turns on, nd opertion strts fter pproximtely 3 minutes. (B): When the MY COMFORT button is pressed during opertion The opertion mode chnges to the setting stored with the MEMO button. Initil setting: MODE : AUTO Temperture : 22 EN 14

17 ADJUSTING AIR FLOW DIRECTION Adjust the ir flow direction properly. Filure to do so could cuse discomfort nd mke n uneven room temperture distribution. Adjust the verticl ir flow using the remote controller. Adjust the horizontl ir flow mnully. Adjusting the verticl ir flow The ir conditioner utomticlly djusts the verticl ir flow direction ccording to the operting conditions when AUTO or A mode is selected. To set selected ir flow direction Use this function when the ir conditioner is operting. FIX button Hold down or briefly press the FIX button on the remote controller to move the louver in the desired direction. Chnge the verticl ir flow louver direction within the rnge indicted. In subsequent opertions, the verticl ir flow is utomticlly set to the direction tht you set the louver using the FIX button. To utomticlly swing the ir flow direction Perform this function when the ir conditioner is operting. SWING button Press the SWING button on the remote controller. To stop the function, press the SWING button. To chnge the swing direction, press the FIX button. CAUTION The FIX nd SWING buttons will be disbled when the ir conditioner is not operting (including when ON TIMER is set). Do not operte the ir conditioner for n extended period of time with the ir flow direction set downwrd during the cooling or dry opertion. Otherwise, condenstion my occur on the surfce of the verticl ir flow louver nd cuse wter dripping. Do not move the verticl ir flow louver mnully. Alwys use the FIX button. If you move the louver mnully, it my mlfunction during opertion. If the louver mlfunctions, stop the ir conditioner once, nd restrt. When the ir conditioner is strted immeditely fter it ws stopped, the verticl ir flow louver might not move for bout 10 seconds. ESPAÑOL ITALIANO DEUTSCH FRANÇAIS Adjusting the horizontl ir flow Preprtion: Grsp the lever on the horizontl ir flow louver nd move them to djust the ir flow direction s required. You cn djust the ir flow t the left nd right loctions of the grilles. ΕΛΛΗΝΙΚΗ ###SW### PORTUGUÊS 15 EN ###RU###

18 AUTO RESTART OPERATION This ir conditioner is equipped with n utomtic restrting function which llows the ir conditioner to resume without the use of the remote controller under the operting settings in the event of power shutdown. Opertion resumes without wrning 3 minutes fter power is restored. INFORMATION The AUTO RESTART OPERATION is not set to work t fctory shipment, nd so it is necessry to set it to this function if required. HOW TO SET AUTO RESTART To set the uto restrt function, proceed s follows: The power supply to the unit must be on. The function will not be set if the power is off. To enble the uto restrt function, hold down the RESET button for 3 seconds. The ir conditioner receives the setting nd beeps 3 times. The system now restrts utomticlly. The uto restrt setting is ctivted. (1) When the ir conditioner is in stnd-by (not running). Hold down the RESET button for 3 seconds or more. The ir conditioner strts to operte. The green indictor turns on. After bout 3 seconds, the ir conditioner beeps 3 times. The green indictor flshes for 5 seconds. The ir conditioner is operting. If the ir conditioner is not required to run t this time, push the RESET button gin or use the remote controller to stop the ir conditioner. (2) When the ir conditioner is operting. RESET button Hold down the RESET button for 3 seconds or more. The ir conditioner stops operting. The green indictor turns off. 3 seconds fter pushing the button, the ir conditioner beeps 3 times. The green indictor flshes for 5 seconds The ir conditioner stops. If you do not need the ir conditioner to stop t this time, use the remote controller to restrt the ir conditioner. During the subsequent opertion, the green indictor is turned on. The uto restrt opertion will not ccept commnd if timer opertion with the remote controller is ctivted. After restrting the ir conditioner by the AUTO RESTART OPERATION, the louver swing (AUTO) opertion resumes. HOW TO CANCEL AUTO RESTART To cncel the uto restrt opertion, proceed s follows: Repet the setting procedure. The ir conditioner receives the setting nd beeps 3 times. The ir conditioner now needs to be mnully restrted with the remote controller fter the min supply is turned off. The uto restrt setting is cncelled. (1) When the ir conditioner is in stnd-by (not running). Hold down the RESET button for 3 seconds or more. The ir conditioner strts to operte. The green indictor will turn on. After bout 3 seconds, the ir conditioner beeps 3 times. The ir conditioner is operting. If the ir conditioner is not required to run t this time, push the RESET button gin or use remote controller to stop the ir conditioner. (2) When the ir conditioner is operting. Hold down the RESET button for 3 seconds or more. The ir conditioner stops operting. The green indictor is turned off. After bout 3 seconds, the ir conditioner beeps 3 times. The ir conditioner stops. RESET button If you do not need the ir conditioner to stop t this time, use the remote controller to restrt the ir conditioner. During subsequent opertion, the green indictor is turned on. EN 16

19 HOW THE AIR CONDITIONER WORKS Automtic Opertion As shown in Figures 1 nd 2, Automtic Opertion mode selects the opertion bsed on the room temperture dt (T) when opertion begins. Het pump models Cooling-only models Room temperture when opertion begins or when selected gin Room temperture Setting temperture+1 Setting temperture Setting temperture 1 Cooling opertion Fn only opertion Heting opertion Room temperture when opertion begins or when selected gin Room temperture Setting temperture+1 Setting temperture Cooling opertion Fn only opertion FRANÇAIS Figure 1 The opertion mode is selected gin fter the compressor hs remined stopped for 15 minutes. Hi POWER opertion When you press the Hi POWER button during cooling, heting or A opertion, the ir conditioner strts the following opertion. Cooling opertion The cooling opertion is performed t 1 C lower thn the temperture setting. The fn speed is lso set to high*. * The noise level rises, ccording to the fn speed. Heting opertion (het pump models) The heting opertion is performed t 2 C higher thn the temperture setting. The fn speed is utomticlly switched ccording to the operting condition. Figure 2 DEUTSCH ITALIANO SLEEP MODE opertion The ir conditioner utomticlly controls the room temperture, ir flow nd noise level, to prevent overcooling in summer nd mintin wrm nd comfortble room in winter. INFORMATION The power nd noise level re reduced during sleep mode, so the room my not be cooled (or heted: het pump models only) sufficiently if the mode is used for long period of time. The sleep mode cnnot be used during dry opertion, PURE opertion (independent opertion) or fn only opertion (coolingonly models only). (PURE opertion (independent opertion) is when the PURE button is pressed while the ir conditioner is stopped to perform PURE opertion by itself. The ir conditioner does not operte t this time.) If the FAN button is pressed during sleep mode, the sleep mode is cnceled. Sleep mode is not timer opertion. Dry opertion ( ) The dry mode utomticlly selects the cooling dry opertion bsed on the difference between the temperture setting nd the ctul room temperture. The fn speed indictor shows AUTO, nd low speed is used. ESPAÑOL ΕΛΛΗΝΙΚΗ PORTUGUÊS ###SW### 17 EN ###RU###

20 HINTS FOR ECONOMICAL OPERATION Mintin room temperture t comfortble level Clen the ir filters Clogged ir filters impir the performnce of the ir conditioner. Clen them every two weeks. Never open doors nd windows more thn necessry To keep cool or wrm ir in the room, never open doors nd windows more thn necessry. Window curtins During cooling opertion, close the curtins to void direct sunlight. During heting opertion, close the curtins to keep the het in. Use the timer effectively Set the timer for the desired operting time. Allow uniform circultion of room ir Adjust the ir flow direction for even circultion of room ir. Plese clen Plese close Blows upwrd Cool nd dry ir Wrm ir Blows downwrd Chilly Control Use the timer effectively Air flow djustment TEMPORARY OPERATION Temporry opertion This function is used to operte the unit temporrily in cse you misplce the remote controller or the btteries re used up. Push the RESET button to strt the utomtic opertion (AUTO). While the temporry opertion is ctivted, the remote controller opertion is disbled. Hold down the button for 10 seconds to strt the cooling opertion. I cnnot find the remote controller A temporry opertion feture is provided! CLEANING OPERATION Clening opertion This function is used to dry the inside of the ir conditioner to reduce the growth of mold, etc. inside the ir conditioner. When the unit shuts down fter hving operted for 10 or more minutes in the cooling or dry mode, the clening opertion is strted utomticlly, nd the S.CLEAN indictor on the unit s disply pnel turns on. Clening opertion durtion The clening opertion lsts for 4 hours if the unit hs been operting in the cooling or dry mode for 10 minutes or more. About the clening opertion The clening opertion will not mke the room clener or remove the mold nd dust lredy inside the ir conditioner. During opertion, smll mount of frost my be visible: this is norml nd does not indicte mlfunction. The verticl irflow louvers open slightly. If n ongoing clening opertion is suspended, the effect of the clening will be compromised. To forcibly stop the clening opertion, press the button twice during the clening opertion. EN 18

21 USUAL MAINTENANCE WARNING Before you clen the ir conditioner, be sure to turn off the circuit breker or min power switch. Clening of indoor unit nd remote controller Wipe with dry cloth CAUTION Use dry cloth to wipe the indoor unit nd remote controller. When the ir conditioner is extremely dirty, use cloth dipped in cold wter to wipe the indoor unit. Never use dmp cloth on the remote controller. Do not use chemicl-bsed duster for wiping or leve such mterils on the unit for extended periods of time. Doing so could dmge or cuse the surfce of the unit to fde. Do not use benzine, thinner, polishing powder, or other solvents for clening. These cn cuse the plstic surfce to crck or deform. When not using the unit for t lest 1 month (1) Perform fn opertion for 3 to 4 hours to dry the inside of the unit. If high temperture setting is used with cooling opertion, fn opertion is performed. (2) Stop the ir conditioner nd turn off the circuit breker. (3) Clen the ir filters. (4) Remove the btteries from the remote controller. Thinner Cooling with high temperture setting. FRANÇAIS DEUTSCH Check before opertion CAUTION Check tht the ir filters re instlled. Check tht the ir outlet nd inlet of the outdoor unit re not blocked. Clening the ir filter Clen the ir filters every 2 weeks. The performnce of the ir conditioner will degrde if the ir filters re covered with dust. Clen the ir filters s often s possible. Preprtion: 1. Turn off the ir conditioner using the remote controller. 2. Open the ir inlet grille. 1 Open the ir inlet grille. Lift the ir inlet grille up to the horizontl position. 2 Grsp the left nd right hndles of the ir filter nd lift it up slightly, nd then pull it downwrd to tke it out from the filter holder. 3 Use vcuum clener to remove the dust from the filters or wsh them with wter. After wshing the ir filters, dry them in the shde. Air filter PORTUGUÊS ΕΛΛΗΝΙΚΗ ESPAÑOL ITALIANO ###SW### 19 EN ###RU###

22 4 Insert the top section of the ir filter so tht its right nd left edges fit on the indoor unit nd it is firmly set. 5 Close the ir inlet grille. * If the FILTER indictor on the indoor unit is shown, press the RESET button on the indoor unit to turn off the indictor. Clening the ir inlet grille Preprtion: 1. Turn off the ir conditioner using the remote controller. 2. Open the ir inlet grille. 1 Remove the ir inlet grille. Hold the two sides of the ir inlet grille nd open upwrds. Remove the left (or right) rm by pushing it towrd the outside nd then pulling it towrd you. 2 Wsh it with wter using soft sponge or towel. (Do not use metllic scrubbing brush or other hrd brushes.) Use of such hrd objects will cuse scrtches on the surfce of the grille nd the metl coting to peel off. If extremely dirty, clen the ir inlet grille with neutrl kitchen detergent nd rinse it off with wter. 3 Wipe off the wter from the ir inlet grille nd dry it. 4 Fit the left nd right rms of the ir inlet grille to the shfts on the two sides of the ir conditioner nd push them in completely. 5 Pull the ir inlet grille downwrd. Push the rrow loctions (four) t the bottom of the ir inlet grille to check tht the grille is completely closed. Arms Left nd right rms NOTE Clening nd mintennce of the indoor/outdoor units re strongly recommended for ir conditioning systems which re used regulrly. Filure to clen the indoor/outdoor units regulrly will result in poor cooling performnce, icing, wter lekge nd even premture compressor filure. EN 20

23 SPECIAL MAINTENANCE Clening the plsm pure filter Preprtion: 1. Turn off the ir conditioner using the remote controller. 2. Turn off the power supply. Clen the plsm pure filter when the FILTER indictor (ornge) turns on. (This indictor turns on fter PURE opertion of bout 1000 hours.) After clening is finished, push the RESET button on the indoor unit. Perform clening every six months or so. Even if the FILTER indictor does not turn on, clen the plsm pure filter whenever the unit mkes humming, clicking, or buzzing sound. If the indictor turns on during the night, the ir conditioner cn still be used until the morning without problem, but be sure to perform clening s soon s possible. FRANÇAIS 1 Open the ir inlet grille. Lift up the ir inlet grille until it clicks into plce. 2 Grsp the left nd right hndles of the ir filter nd lift up slightly nd then pull downwrd to remove the filter from the filter holder. 3 Tke out the plsm pure filter. Grsp the hndles, nd then pull out s shown in nd b. Checks fter clening the plsm pure filter 1. Confirm the FILTER indictor does not turn on by ctivting PURE opertion for one hour or more. <If it does not turn on, it is norml> 2. If the FILTER indictor turns on, recheck the following. ) Fitting of the plsm pure filter b) Fitting of the ir inlet grille And, reconfirm the FILTER indictor does not turn on by ctivting PURE opertion for nother one hour or more. <If it does not turn on, it is norml> 3. In cse the FILTER indictor does turn on, plese cll service representtive. 1 2 DEUTSCH ITALIANO ESPAÑOL ###SW### PORTUGUÊS ΕΛΛΗΝΙΚΗ 21 EN ###RU###

24 4 Wsh nd then dry. (1) Sok in hot wter t 40 to 50 C for bout 10 to 15 minutes. If the stining is prticulrly severe, use wshing detergent compound (wek bsic or neutrl) t 10 to 15 times the stndrd concentrtion. (2) Rub up nd down, nd rub left nd right. Also, rub the surfce gently with sponge. (3) Rinse with running wter. (4) Shke thoroughly, nd llow the unit to drin. (If oil or smoke strins re prticulrly hrd to remove, repet steps (1) to (4) 2 or 3 times.) (5) Dry thoroughly in the shde. CAUTION Never use ny products mrked s blech. Do not ttempt to disssemble the unit. Do not rub with scrubbing brush or similr implement. Do not utilize wshing devices or equipment. Do not dry with hir dryer or other pplince tht uses hot ir. (The het cn cuse the unit to deform.) After clening, wit until the unit is completely dried before ttching. The FILTER indictor my turn on if the unit is used while wet. 5 Attch the plsm pure filter. Grsp the hndles, nd then insert s shown in. Insert into the right nd left guide rils, nd then press in the direction of b fter it is ll the wy in. Press both ends of the plsm pure filter in the direction of c until the protrusions on both sides of the plsm pure filter re completely inserted into the holders. 2 3 Press in the plsm pure filter until the protrusions on both sides re completely inserted into the holders. If instlltion is incomplete, the FILTER indictor (ornge) my light. 6 Attch the ir filter, nd then close the ir inlet grille. 1 Holder Protrusion Plsm pure filter EN 22

25 AIR CONDITIONER OPERATION AND PERFORMANCE Three-minute protection feture A protection feture is provided tht prevents the ir conditioner from being ctivted for pproximtely 3 minutes when it is restrted immeditely fter opertion or when the power supply switch is set to on. This is used to protect the mchine. Heting chrcteristics (het pump models) Preheting opertion The ir conditioner does not deliver wrm ir immeditely fter it is strted. Wrm ir flows out fter pproximtely 5 minutes when the indoor het exchnger hs wrmed up. Wrm ir control When the room temperture reches the temperture setting, the fn indoor speed is utomticlly reduced. The outdoor unit is stopped t this time. Defrosting If frost hs formed on the outdoor unit during the heting opertion, defrosting is strted utomticlly (for pproximtely 5 to 10 minutes) to mintin the heting effect. The fns in both the indoor nd outdoor units stop during the defrost opertion. During the defrost opertion, defrosted wter is drined from the bottom plte of the outdoor unit. Heting cpcity In the heting opertion, het is bsorbed from outdoors nd relesed into the room. Tht is clled the het pump system. When the outdoor temperture is too low, usge of nother heting pprtus in combintion with the ir conditioner is recommended. Considertion for ccumulted snow Select the position for the outdoor unit where it will not be subjected to snow drifts, ccumultion of leves or other sesonl debris. It is importnt tht the ir flow of the outdoor unit is not blocked s this will result in reduced heting or cooling performnce. During the heting mode nd t sub-zero tempertures, the wter drined off the outdoor unit s result of the utomtic defrost my ccumulte nd freeze. It is importnt tht dequte dringe or sok-wy be provided. Power filure Power filure during opertion stops the unit completely. The OPERATION indictor (green) on the indoor unit strts flshing when power is restored. To restrt opertion, push the button on the remote controller. Lightning or cr wireless telephone operting nerby my cuse the unit to mlfunction. Turn the power supply switch off nd then on gin. Push the button on the remote controller to restrt. Air conditioner operting conditions For proper performnce, operte the ir conditioner under the following temperture conditions. Cooling opertion Outdoor temperture: 10 C to 46 C Room temperture: 21 C to 32 C Heting opertion (het pump models) CAUTION Dry opertion Outdoor temperture: 10 C to 46 C Room temperture: 17 C to 32 C Room reltive humidity less thn 80%. If the ir conditioner opertes outside this rnge, the surfce of the ir conditioner my ttrct condenstion. Outdoor temperture: 15 C to 24 C Room temperture: Less thn 28 C If the ir conditioner is used in conditions other thn bove, the sfety protection functions my be ctivted. When the indoor unit is connected to the inverter multi outdoor unit, you my feel heting effect in heter mode even if it is set to thermo off. PORTUGUÊS ΕΛΛΗΝΙΚΗ ESPAÑOL ITALIANO DEUTSCH FRANÇAIS For detils on the specifictions when used in combintion with multi ir conditioner outdoor unit, refer to the specifictions tble provided with the multi ir conditioner outdoor unit. ###SW### 23 EN ###RU###