AC Z SERIES XLR METAL CHASSIS MOUNT CONNECTORS
|
|
- Dora Fox
- 7 years ago
- Views:
Transcription
1 AC Z SERIES XLR METAL CHASSIS MOUNT CONNECTORS The metal chassis mount Z series connectors are designed for the audio user where durability, reliability and strength across a wide range of applications are important. All AC products are manufactured to the highest quality standards and will withstand the harshest environments. This range complies with IEC and AES standards. CSA File Number Features The "D" size housing can be either front or rear mounted using the same panel cutout. The "P" size housing is the original wide flange front mounting XLR connector. "PN" is the original narrow flange front mounting male connector. A leading first mate last break socket contact is standard on all female connectors (Pin 1). Solder cup or versions. Connectors are fitted with a grounding system for RFI shielding applications. Available in 3, 4, 5, 6A and 7 contact arrangements. Compatible with all other XLR brands. Options Solder Bucket termination contacts Zinc Diecast Shell - Satin Zinc Diecast Shell - Black Polyester Finish Gold, Silver or Tin Plated Contacts aging Single Bag packs Precision machined contacts Cost effective stamped contacts on 3 pole Latchless versions (Non-Latching) (Female only) Note: A ground tag is standard on all AC "Z" series connectors. Although the ground tag is intended for RFI shielding applications, Amphenol cannot guarantee its effectiveness in all cases. The non-conductive Black polyester finish insulates the ground tag from the shell and should not be used in applications requiring ground contact to the shell. Ordering Codes We have listed the more common ordering codes in each section. For further options please refer to the part number breakdown charts. Please contact us if you need any further assistance. Simple steps to guide you in using this catalogue 1) Identify the product group listed in Contents on Page 1 and go directly to that page number. 2) Each product group cover page then details information and options available. 3) Refer to the product detail pages and identify the product you require pictorially. 4) Read the product description column for the products standard features. 5) Use variations column to determine your choice. 6) Identify part number. 7) In the event the particular option you require is not listed please refer to the part number breakdown page at the end of each section. 8) Please contact us directly if you have any further problems. 15
2 METAL D TYPE FLANGE Features: Zinc Diecast Shell. D size housing can be front or rear mounted using the same panel cutout. Solder Bucket connections. mounting (not available in 4 contact female). Precision machined or Stamped contacts (3 pin only). Leading first mate last break socket contact. Positive latch lock system. Options: Stamped contacts (3 contact only), Gold plated contacts, contacts, Black finish, Non-Latching(Female only),. Part Number Breakdown: Page 24 Specifications: Page 25 PCB Footprints: Page 26 Panel Cutouts: Page 26 XLR 3 pole female, XLR 3 pole female, AC3MMDZ AC3MMDZ-AU AC3MMDZV AC3MMDZ BULK AC3MMDZB AC3MMDZB-AU AC3MMDZVB AC3MMDZB BULK AC3MDZ AC3MDZ-AU AC3MDZV AC3MDZ BULK AC3MDZB AC3MDZB-AU AC3MDZVB AC3MDZB BULK AC3FDZ AC3FDZ-AU AC3FDZV AC3FDZ BULK AC3FDZB AC3FDZB-AU AC3FDZVB AC3FDZB BULK 16
3 METAL D TYPE FLANGE XLR 4 pole male, XLR 4 pole male, XLR 4 pole female, XLR 4 pole female, XLR 5 pole male, XLR 5 pole male, XLR 5 pole female, XLR 5 pole female, AC4MDZ AC4MDZ-AU AC4MDZV AC4MDZ BULK AC4MDZB AC4MDZB-AU AC4MDZVB AC4MDZB BULK AC4FDZ AC4FDZ-AU AC4FDZV AC4FDZ BULK AC4FDZB AC4FDZB-AU AC4FDZVB AC4FDZB BULK AC5MDZ AC5MDZ-AU AC5MDZV AC5MDZ BULK AC5MDZB AC5MDZB-AU AC5MDZVB AC5MDZB BULK AC5FDZ AC5FDZ-AU AC5FDZV AC5FDZ BULK AC5FDZB AC5FDZB-AU AC5FDZVB AC5FDZB BULK 17
4 METAL D TYPE FLANGE XLR 6A pole male, XLR 6A pole male, XLR 6A pole female, XLR 6A pole female, XLR 7 pole male, XLR 7 pole male, XLR 7 pole female, XLR 7 pole female, AC6AMDZ AC6AMDZ-AU AC6AMDZV AC6AMDZ BULK AC6AMDZB AC6AMDZB-AU AC6AMDZVB AC6AMDZB BULK AC6AFDZ AC6AFDZ-AU AC6AFDZV AC6AFDZ BULK AC6AFDZB AC6AFDZB-AU AC6AFDZVB AC6AFDZB BULK AC7MDZ AC7MDZV AC7MDZ BULK AC7MDZB AC7MDZVB AC7MDZB BULK AC7FDZ AC7FDZV AC7FDZ BULK AC7FDZB AC7FDZVB AC7FDZB BULK 18
5 METAL P TYPE FLANGE Features: Zinc Diecast shell. The P size housing is the original wide flange front mounting XLR connector. PN is the original narrow, front mounting male connector. Solder Bucket connections. mounting. Precision Machined or Stamped contacts (3 pin only). Leading first mate last break socket contact. Positive latch lock system. Options: Stamped contacts (3 contact only), Gold plated contacts, contacts,, Non-Latching (Female only),. Part Number Breakdown: Page 24 Specifications: Page 25 PCB Footprints: Page 26 Panel Cutouts: Page 26 AC3MMPNZ AC3MMPNZ-AU AC3MMPNZV AC3MMPNZ BULK AC3MMPNZB AC3MMPNZB-AU AC3MMPNZVB AC3MMPNZB BULK AC3MPNZ AC3MPNZ-AU AC3MPNZV AC3MPNZ BULK AC3MPNZB AC3MPNZB-AU AC3MPNZVB AC3MPNZB BULK AC3MMP AC3MMP-AU AC3MMPV AC3MMP BULK AC3MMPB AC3MMPB-AU AC3MMPVB AC3MMPB BULK 19
6 METAL P TYPE FLANGE XLR 3 pole female, XLR 3 pole female, XLR 4 pole male, XLR 4 pole male, XLR 4 pole male, XLR 4 pole male, AC3MP AC3MP-AU AC3MPV AC3MP BULK AC3MPB AC3MPB-AU AC3MPVB AC3MPB BULK AC3FPZ AC3FPZ-AU AC3FPZV AC3FPZ BULK AC3FPZB AC3FPZB-AU AC3FPZVB AC3FPZB BULK AC4MPNZ AC4MPNZ-AU AC4MPNZV AC4MPNZ BULK AC4MPNZB AC4MPNZB-AU AC4MPNZVB AC4MPNZB BULK AC4MP AC4MP-AU AC4MPV AC4MP BULK AC4MPB AC4MPB-AU AC4MPVB AC4MPB BULK 20
7 METAL P TYPE FLANGE XLR 4 pole female, XLR 4 pole female, XLR 5 pole male, XLR 5 pole male, XLR 5 pole male, XLR 5 pole male, XLR 5 pole female, XLR 5 pole female, AC4FPZ AC4FPZ- AU AC4FPZV AC4FPZ BULK AC4FPZB AC4FPZB- AU AC4FPZVB AC4FPZB BULK AC5MPNZ AC5MPNZ- AU AC5MPNZV AC5MPNZ BULK AC5MPNZB AC5MPNZB- AU AC5MPNZVB AC5MPNZB BULK AC5MP AC5MP- AU AC5MPV AC5MP BULK AC5MPB AC5MPB- AU AC5MPVB AC5MPB BULK AC5FPZ AC5FPZ- AU AC5FPZV AC5FPZ BULK AC5FPZB AC5FPZB- AU AC5FPZVB AC5FPZB BULK 21
8 METAL P TYPE FLANGE XLR 6A pole male, XLR 6A pole male, XLR 6A pole male, XLR 6A pole male, XLR 6A pole female, XLR 6A pole female,, XLR 7 pole male, XLR 7 pole male, AC6AMPNZ AC6AMPNZ- AU AC6AMPNZV AC6AMPNZ BULK AC6AMPNZB AC6AMPNZB- AU AC6AMPNZVB AC6AMPNZB BULK AC6AMP AC6AMP- AU AC6AMPV AC6AMP BULK AC6AMPB AC6AMPB- AU AC6AMPVB AC6AMPB BULK AC6AFPZ AC6AFPZ- AU AC6AFPZV AC6AFPZ BULK AC6AFPZB AC6AFPZB- AU AC6AFPZVB AC6AFPZB BULK AC7MPNZ AC7MPNZV AC7MPNZ BULK AC7MPNZB AC7MPNZVB AC7MPNZB BULK 22
9 METAL P TYPE FLANGE XLR 7 pole male, XLR 7 pole male, XLR 7 pole female, XLR 7 pole female, AC7MP AC7MPV AC7MP BULK AC7MPB AC7MPVB AC7MPB BULK AC7FPZ AC7FPZV AC7FPZ BULK AC7FPZB AC7FPZVB AC7FPZB BULK 23
10 METAL TYPE FLANGE PART NUMBER BREAKDOWN METAL TYPE FLANGE E. G. AC3MMPNZVB-AU BULK AC (Series Prefix), 3 contacts, Male, Machined Contacts, PN (Narrow Flange), Z (Metal Chassis Series), Vertical Printed Circuit Board, Black Polyester Finish, - AU (), aged. SERIES PREFIX CONTACT LAYOUTS GENDER CONTACT TYPE SHELL STYLE SHELL SERIES TERMINATION SHELL FINISH CONTACT PLATING PACKAGING AC 3 M M PN Z V B - AU BULK SERIES PREFIX CONTACT LAYOUTS GENDER MACHINED CONTACTS SHELL STYLE SHELL SERIES TERMINATION SHELL FINISH CONTACT PLATING PACKAGING AC A 7 F M Blank M NOTE: D P PN Blank Z Blank V Blank B Blank AU Blank BULK Series Prefix 3 Contacts 4 Contacts 5 Contacts 6 Contacts 7 Contacts Female Socket Contacts Male Pin Contacts Stamped Contacts Machined Contacts (Applicable 3 male pin contacts only) 4-7 contact connectors have machined contacts as standard. They are not available in stamped contacts. Small Flange(front or rear mounting) Large Shell with wide flange Large Shell with Narrow Flange (male only) Male P Shell Style only Metal Chassis Series Solder Buckets Vertical Printed Circuit Board Nickel Plated Finish Black Polyester Finish Plating ( Silver or Tin - Refer to Data.) NOTE: 7 Contact is gold plated as standard. Individual Bags ed 24 Note: Non-Latching Versions (Female) available - Please contact us for part number options.
11 STANDARD DATA STANDARD DATA AC SERIES CHASSIS - METAL Z VALUE GENERAL CHARACTERISTICS Number of contacts Contact Arrangement (Front view of pin inserts) A 7 Termination Solder Bucket / Printed Circuit Board (PCB) Max. Wire Gauge - Stranded wire: Solder 14AWG 16AWG 18AWG 18AWG 20AWG Printed Circuit Board - PCB N/A N/A N/A N/A N/A ELECTRICAL CHARACTERISTICS Flammability rating of plastics Environmental Service Voltage RMS Test Voltage AC RMS UL94V-0 Complies with RoHS Directive 2002/95/EC 133V 1400V 1) Current carrying capacity: Solder 15A 10A 7.5A 7.5A 5A Printed Circuit Board (PCB) 15A 10A 7.5A 7.5A 5A CLIMATIC CHARACTERISTICS Typicial Contact Resistance Insulation Resistance Protection Class Operating Temperature 3mΩ 1000MΩ IP40-25 C to +75 C (-13 F to +167 F) MECHANICAL CHARACTERISTICS 2) Weight - Metal 31g 32g 33g 33g 33g (0.068lb) (0.070lb) (0.072lb) (0.072lb) (0.072lb) MATERIALS Mechanical Operations Connector Shell Shell Finish Insulators Male Contact Stamped Solder and PCB-(Material/Plating) Machined Solder-(Material/Plating) Female Contact 1000 mating cycles Diecast Zinc Alloy Satin Nickel or Black Polyester UL94V-0 PBT Resin or Modified PPE Resin Phosphor Bronze / Silver or Gold (optional) Brass / Silver or Gold (optional) Rev 2-09/2005 1) Stamped Solder and PCB-(Material/Plating) Machined Solder-(Material/Plating) Not suitable for domestic applications above 50V Phosphor Bronze / Tin or Gold (optional) Brass / Silver or Gold (Optional) - 4 socket is tin plated 2) Approximate weight only, does not include packaging. Please contact us for exact weight for shipping purposes. 25
12 METAL TYPE FLANGE AC SERIES CHASSIS METAL Z PCB FOOTPRINTS STRAIGHT (V) CONNECTOR SIDE OF PCB AC3F*ZV AC3M*ZV AC3MM*ZV AC4F*ZV AC4M*ZV AC5F*ZV AC5M*ZV AC6AF*ZV AC6AM*ZV AC7F*ZV AC7M*ZV PANEL CUTOUT DIMENSIONS FRONT VIEW AC*FDZ AC*MDZ AC*FPZ 26 AC*MP AC*MPNZ AC-PDN-31-XXX AC-PDN-34-XXX
ISO VIEW OF AX SERIES XLR CABLE CONNECTOR
ISO VIEW OF AX SERIES XLR CABLE CONNECTOR One piece ground / latch spring design incorporating twin wipe contacts for a direct connection path from mating shell to ground providing enhanced connection
More informationAC SERIES DUAL 1/4 (6.35mm) / XLR
AC SERIES DUAL 1/4 (6.35mm) / XLR The AC Series C type chassis receptacles feature two connectors in the one space saving housing. A combined XLR female receptacle together with a 6.35mm (1/4 ) phone jack
More informationAC SERIES-C TYPE DUAL CONNECTORS JACK/XLR
AC SERIES-C TYPE DUAL CONNECTORS JACK/XLR The AC Series C type chassis receptacles feature two connectors in the one space saving housing. A combined XLR female receptacle together with a 6.35mm (1/4 )
More informationAmphenol C 091 A/B/D. Circular Connectors. Amphenol-Tuchel Electronics GmbH
Amphenol C 091 A/B/D Circular Connectors Amphenol-Tuchel Electronics GmbH C 091 A Main Features Metal threaded coupling acc. to IEC. Number of contacts are 2 to 8, 12 and 14. Internal metal strain relief
More informationJack to Jack adapters Plug to Plug U-Link connectors PCB Right angle plastic PCB Right angle - metal. Ordering Codes
BNC 75Ω RF CONNECTORS BNC 75Ω RF CONNECTORS To meet the need for higher performance, impedance matched cable interconnections, Amphenol offers a full line of 75 ohm BNC connectors. These connectors can
More informationMini USB and USB 2.0-IP67 Connector System
Mini USB and USB 2.0-IP67 Connector System Section 12 Mini USB and USB 2.0-IP67 Connector System CONEC has added the Mini-USB connector. This Mini-USB IP67 receptacle and plug family, feature a bayonet
More information.093 [2.36] Commercial Pin and Socket Connectors
Product Facts Polarized Cavity identification Low contact-mating force Dual locking lances Detent and positive locking Contacts available in brass and phosphor bronze with tin and gold plating Panel mounting
More informationCIN::APSE MICROMINIATURE D-SUB
INTRODUCTION CINCH has been producing filter connectors for years and has acquired an in depth knowledge of EMC protection. CINCH offers fast delivery on a wide range of standard filtered connectors and
More informationIEC Connectors. Introduction
Introduction IEC Connectors A full range of quality mains rated inlets, outlets and connectors conforming to IEC and EN 60320 specifications carrying UL, CSA, VDE and other approvals. With electrical ratings
More informationSealed Industrial Ethernet Circular IP67 Cat. 5e RJ45 Connector System
Revised Sept--22-2009 Sealed Industrial Ethernet Circular IP67 Cat. 5e RJ45 Connector System Description The sealed circular RJ45 connector system is designed for use in harsh environments. The connector
More informationSTANDARD MICRO-D CONNECTORS
STANDARD MICRO-D CONNECTORS RECTANGULAR CONNECTORS Pigtail connector - Metal shell.............................. 56 Pigtail connector - Low profile - Metal shell.................... 58 Pigtail connector
More information6000 Series Buccaneer. 30 twist locking Tamperproof lock prevents accidental un-mating. Cat 5e shielded coupler Maintains shielding
circular connectors that combine the ease of use of a push/pull coupling mechanism with proven environmental sealing. Available with metal or plastic bodies, the range supports both data (USB and Ethernet),
More information400 Series - Mini USB Buccaneer
IP68 Sealed IP68 rated USB V2.0 performance Plug and play capability Shielded system Overmoulded cables Screw coupling PCB versions Dust and waterproof to EN60529 Data rates up to 480Mbs Hot pluggable,
More informationDirectory chapter 02 - DIN Power (to 6 A) Types D, E, F, FM, 2F, F9, interface connectors I/U 02. 01. Technical characteristics types D and E... 02.
Directory chapter 02 - () Types D, E, F, FM, 2F, F9, interface connectors I/U Page Technical characteristics types D and E.............................. 02.10 Type D connectors.................... 02.11
More informationUniversal MATE-N-LOK Connectors
Product Facts Pins and sockets can be intermixed in the same housing Positive polarization Rear cavity identification completely enclosed in housings Positive locking housings Insulation capability to.00
More informationSOURIAU s discrete wire sealing
SOURIAU s discrete wire sealing Description Using proven grommet technology from SOURIAU s extensive knowledge of harsh environments, the UTO & UTS connectors with grommet garantie a discrete wire sealing
More informationDirectory chapter 04
M Directory chapter 04 D-Sub Mixed subminiature D connectors New Page D-Sub mixed connector system general information................... 04.02 Contact arrangements............................................
More information08. SEK IDC CONNECTORS
. IDC CONNECTORS connectors for flat cables enable simple and, cost-optimized device configuration. connectors are preferably used for connection within the device. HARTING offers a broad range of these
More information7000 Series Buccaneer
The all plastic and metal construction of the - circular that combine the ease of use of a quick coupling mechanism with proven environmental sealing for signal and mains power. Designed and independently
More informationCONEC SnapLock. 1 Introduction
CONEC SnapLock E L E C T R O N I C C O N N E C T O R S 1 Introduction The new CONEC SnapLock locking system consists of D-SUB connectors and D-SUB hoods allowing quick and safe locking without any additional
More informationTrapezoidal-Connectors Series TMC
Trapezoidal-Connectors Series TMC Subminiature-D Connectors to DIN 41 652/IEC 807-3 General Series TMC connectors are available in 5 different housing sizes with 9, 15, 25, 37 and 50 pins. In applications
More information400 Series Buccaneer BUCCANEER POWER. bulgin
bulgin BUCCANEER FOR POWER Contact Retainer Sealing Gasket O Ring Contacts Locking Ring Retaining Nut Panel Body Contacts Contact Carrier O Ring Main Body Cable Gland Collet Gland Nut Sealed to IP68 when
More informationSMS - Qikmate. Performance characteristics
- Qikmate Qikmate panel and cable connectors Description The versatile Qikmate panel and cable connectors are a highly cost-effective system approach to solving the constant demand for more cost effective
More informationStandard Buccaneer - USB
IP68 rated USB version 2.0 performance Plug and play capability Visual mating indication Shielded system Single and double ended cables Screw coupling PCB versions Dust and waterproof sealing when mated
More information.062 [1.57] Commercial Pin and Socket Connectors
Pin and Socket onnectors MP Product Facts Polarized avity identification Low contact-mating force Dual locking lances Detent and positive locking ontacts available in brass and phosphor bronze with tin
More informationAMP. 5.0 mm Power Key Connectors (5.0 PKC) (Wire-to-Board) Soft Shell Pin and Socket Connectors. Product Facts. Standard Density
5.0 mm Power Key Connectors (5.0 PKC) (Wire-to-Board) Product Facts Compact design with 19.4 mm mated height Power circuit connector with 5.0 mm contact centerline Wire-to-board connectors consisting of
More information3M Serial Attached SCSI (SAS) Connector Boardmount Compliant Pin and Surface Mount, Vertical Receptacle
M Serial Attached SCSI (SAS) Connector 6 Gbps input/output connector for backplane applications Two contact mating levels for early-mate and latebreak allows blind mating or hot swap applications Capable
More informationStandard Buccaneer - Ethernet
IP6 rated compliant PUR jacket on cable Shielded system shielded coupler Shroud on RJ45 Screw coupling Rewireable flex connector PCB mounted panel connector IDC termination panel connector Earth lead version
More informationAnderson Power Products
Anderson Power Products Anderson Power Products APP s philosophy is to provide products and services within the trading markets of our customers. We currently serve our world-wide customer base from customer
More informationTINY xlr... 4. Plugs... 6. Jacks... 8. Phono "RCA" & DIN Connectors... 10. Patch Box & Stage Box... 12. Dual Banana Plug... 14. Technical Data...
Product Guide 2010 C o n t e n t P a g e TINY xlr... 4 Plugs... 6 Jacks... 8 Phono "RCA" & DIN Connectors... 10 Patch Box & Stage Box... 12 Dual Banana Plug... 14 Technical Data... 15 2 R E A N With the
More informationSMZ type 43 INTRODUCTION. The Radiall Type 43 coaxial connector range. Type 43 series - Features and benefits
INTRODUCTION The Radiall Type 43 coaxial connector range The Radiall range of Type 43 series connectors is fully approved (where applicable) to BT (British Telecom) standards as well as to British Standard
More informationFASTON Terminals and Connectors
Introduction Product Facts Straight, right-angle and receptacle-tab combinations available Receptacles available for 6.3 mm, 4.8 mm and 2.8 mm tab size (.250,.187 and.110 Series) Receptacles mate with
More informationAmphenolR. Now you're connected!
Table of Contents CoolPower Overview... Page 3 CoolPower Slim Drawer - DW Series... Page 4 CoolPower D-Sub - LCC17 Series... Page 7 Amphenol Power Solutions... Page 9 Other Amphenol Commercial Products...
More information6000 Series Buccaneer
Robust, instant connections for harsh environments 6000 Series Buccaneer - circular connectors that combine the ease of use of a push/pull coupling mechanism with proven environmental sealing. Available
More informationPhysical. Electrical. Environmental. Insulation: Contact: Plating: Temperature Rating: -55 C to +85 C
M I/O Interconnect System 2.0 mm for IEEE 194 Wiremount Receptacle (Female) E206 Series Designed to mate to all M I/O Interconnect System 2.0 mm for IEEE 194 Boardmount Plugs Polarized to provide proper
More information14 PHOENIX CONTACT Courtesy of Power/mation. 1310 Energy Lane, Saint Paul, MN 55108. info@powermation.com - 800-843-9859 - www.powermation.
14 PHOENIX CONTACT PLUSCON circular is a circular connector for use in industrial automation. The range of design sizes available is varied, starting with the design sizes M5 to M8 and M1, for sensor/actuator
More informationTrident Connector Family Offers the Versatility and Reliability Required in Industrial & Transportation Applications
Trident Connector Family Offers the Versatility and Reliability Required in Industrial & Transportation Applications Industrial and transportation applications require robust connections with superior
More informationQM (1.78mm-.070") CONNECTORS-"MICRO 70"
QM (1.78mm-.070") CONNECTORS-"MICRO 70" General Designed to fill the needs of high density and miniature interconnection, the QM series are Super-Small IDC Connection. This IDC plug uses I/O Cable
More informationEPIC CIRCON M23 Series Circular Signal Connectors
Circular Signal Connectors CIRCON M2 circular signal connectors are designed to DIN specification N698 and have a standard M2 threaded connection housing. They are offered in coupler, connector, and panel
More informationHARTING Ethernet Cabling 4-poles Overview
Overview RJ45 Connectors [on page 8] System cables [on page 10] Distribution modules and Outlets [on page 20] HARTING PushPull Connectors [on page 22] System cables [on page 24] Panel feed-throughs [on
More informationCOAXICON Contacts. RF Coax Connectors. Product Facts
COXICON Contacts Product Facts Tyco Electronics provides a variety of contacts for coaxial connectors Contacts are available in a range of sizes that may be used with the various types of coaxial cable
More informationINNOVATION SUPPORTED BY A TRULY SOLID INDUSTRIAL ORGANIZATION.
CONNECTORS 2014 INNOVATION SUPPORTED BY A TRULY SOLID INDUSTRIAL ORGANIZATION. Stelvio Kontek S.p.A. is one of the leading groups in the connectors market. With a solid background in the sector and having
More information1000 Series Miniature Slide Switches
Miniature Switches Features/Benefits Variety of actuators and terminations Panel mount tabs available Epoxy terminal seal compatible with bottom-wash cleaning RoHS compliant Typical Applications Test &
More informationSeries Connectors for PCB
HE 8 / 127 Series Connectors for PCB MAIN CHARACTERISTICS Main features The 127 series circuit board connectors are available in 3 different versions: HE 801 / 127: E 301/B From 17 to 144 signal contacts,
More informationPCI EXPRESS CARD EDGE G630E Series
GENERAL INTRODUCTION The PCI Express is a new serial I/O technology that is compatible with the current PCI software environment. It provides low-cost, scalable performance for the next generation of computing
More informationTwo Position Cable-to-Board Power Connector System (Right Angle/Straight) with Coding Contacts
Product Specification 108-19346 17 APR 2013 Rev F Two Position Cable-to-Board Power Connector System (Right Angle/Straight) with Coding Contacts 1. SCOPE 1.1. Content NOTE The product may not perform according
More informationSFP Single Port Multi-Port Ganged
Single Port Multi-Port Ganged Amphenol s SFP connector series is a 20 position connector and cage combo for mounting to a host PCB with a metal cage enclosing the connector. These connectors are similar
More informationThis product can be assembled to the baseplate maintaining 5 mm center-to-center spacing. Thus any number of poles can end-to-end stack.
page 1/5 Plug-in Screw Connector System for Printed Circuit Boards 950-NLFL-DS 5.00 mm (0.197 in) Spacing - 2-12 poles PICTURES 950-NLFL-DS 950-NLFL & 971-SLK TECHNICAL INFORMATION Description This two
More informationOutdoor Use Waterproof I/O Connectors (Optical / Modular / Electrical) FO-BH, FO-BC, NT5, JN2 / W Series
COMPONENTS PRODUCT INFORMATION RoHS Compliant NEW Outdoor Use Waterproof I/O Connectors (Optical / Modular / Electrical) FO-BH, FO-BC, NT5, JN2 / W Series Optical FO-BH Series (Compact Type) CONNECTOR
More informationWaterproof Connectors for Outdoor Use
Waterproof Connectors for Outdoor Use HR41A Series Mated condition diagram Nut-tightening rear mount type (panel thickness=mm) 70.5 Features 1. Waterproof connector designed for outdoor use Light-weight
More informationUSB3.0 Micro-B Connector
USB3.0 Micro-B Connector ZX360 Series General The ZX360 Series is a Micro-USB connector that is compliant with the MicroUSB 3.0 specifications and supports up to 5Gbps high speed data transmission. As
More informationNYS216. Technical Information. Product. Electrical. Mechanical. Material. Environmental. Product specific
NYS216 3 pole horizontal 1/4'' jack, all contacts switched, plastic housing with nut and washer Technical Information hide Product Title NYS216 Electrical Dielectric strength Insulation resistance Rated
More information600H and 600NH series
600H and 600NH series Toggle switches - high amperage Distinctive features and specifications Construction Terminal and contact support are manufactured from a single piece of metal. The contacts are resistance-welded
More informationOperating Temperature Range: -30 to +85ç (Note 1) Operating Humidity Range: 40 to 80%
All non- products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website search at www.hirose-connectors.com, or contact your Hirose sales representative.
More informationHow to Order : Power Connector
How to Order : Power Connector Power Connector 89 90 XXX - XX X X X X - X X X XXX SPECIFICATIONS No. Specifications Standard Value Style A For Cable with S/R B For Cable without S/R P For Panel Front Mounting
More informationODU MEDI-SNAP. Miniature Circular Connectors with Push-Pull Locking Made of Plastic or Metal. www.odu.de
Miniature Circular Connectors with Push-Pull Locking Made of Plastic or Metal Miniature Circular Connectors with Push-Pull Locking for Medical Applications Applications Medical Test and measure equipment
More informationAMPSEAL* Automotive Plug Connector and Header Assembly
AMPSEAL* Automotive Plug Connector and Header Assembly Application Specification 24 SEP 97 Rev E All dimensions are given in millimeters unless otherwise specified. All dimensional tolerances are +0.2
More informationNow Available in Black Zinc Nickel
847/848 Series Power Supply up to 63 Now vailable in lack Zinc Nickel The 847/848 bayonet Series has been especially designed for light and harsh environment. Its physical characteristics and performances
More informationHARTING Ethernet Cabling 4-poles Overview
Ethernet Cabling 4-poles Overview RJ45 Connectors [on page 8] System cables [on page 10] Distribution modules and Outlets [on page 20] Connectors [on page 22] System cables [on page 24] Panel feed-throughs
More information3M Mini D Ribbon (MDR) Connectors.050 Surface Mount Right Angle Receptacle - Shielded 102 Series
M Mini D Ribbon (MDR) Connectors.050 Surface Mount Right Angle Receptacle - Shielded 102 Series Wiper-on-wiper contact for reliable repetitive plugging Ultra-low signal skew for high data rate transmission
More informationXG2. Flat Cable Connectors for PCBs. Achieve Total Cost Reduction through High-density Mounting and Reduced Wiring. Terminal Arrangement
Flat Cable Connectors for PCBs XG2 Achieve Total Cost Reduction through High-density Mounting and Reduced Wiring IDC connections allow you to wire all terminals at once without terminating the cable. Can
More informationCannon, VEAM, BIW. A Historical Achievement of Technology Leadership. Defining and Championing Innovation
Cannon, VEAM, BIW A Historical Achievement of Technology Leadership Defining and Championing Innovation Showcasing a portfolio of creativity, ITT s Engineered For Life execution embraces products which
More informationpicomax The Pluggable Connection System
picomax The Pluggable Connection System TECHNOLOGY THIS SPECIALIZED CAN T MEET ALL REQUIREMENTS. YES IT CAN. CONTENTS picomax Pin spacing: 3. mm/0.138 in;.0 mm/0.197 in; 7. mm/0.29 in Versatile Pluggable
More informationAMP Soft Shell Pin and Socket Connectors
Soft Shell Pin and Socket Connectors Restriction on the use of Hazardous Substances (RoHS) t Tyco Electronics, we re ready to support your RoHS requirements. We ve assessed more than 1.5 million end items/components
More informationDL AND DBA SERIES CONNECTORS QUALIFIED TO MIL-DTL-83723 SERIES III Weight-saving aluminum connectors designed for rugged use and high temperatures
DEUTSCH DL AND DBA SERIES CONNECTORS QUALIFIED TO MIL-DTL-83723 SERIES III Weight-saving aluminum connectors designed for rugged use and high temperatures DEUTSCH DL AND DBA SERIES CONNECTORS Weight-saving
More information* Please visit the product pages on our website for the most up-to-date product information. Con-X Molded Cable Assembly Checklist...
TABLE OF CONTENTS Custom Molded Cable Assemblies and Connectors..........................2 Capabilities.....................................................................3 Standard Connector Products.......................................................4
More informationAssembly Instruction CAI- Connector with universal Endbell
CANNON STANDARD Seite 1 von 17 CAI- Connector with universal Endbell Shell size 10 to 36 with APK contact / Trident T2P - contact Illustration and assembly exemplary of CAI Layout 20-0306 with APK / Trident
More informationZIF Connector & Flat Flexible Cable
ZIF Connector & Flat Flexible Cable 09/08-1 ZIF Connector & Flat Flexible Cable As the demand for higher density in electronic equipment increases, the use of Flexible Flat Cable (FFC) or Flexible Printed
More informationMTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors
MP Economy Power (EP) Connectors Table of Contents 2 Introduction This catalog has been designed to assist you, our customer, identify products to satisfy your connector needs for printed circuit board
More informationPRODUCTS SPECIFICATION
PRODUCTS SPECIFICATION ************************************************************************************** Description : DVI Connector Customer : COMOSS P/N : DV Series Date of Issue : 20-Sep-2002 Version
More informationPRODUCT SPECIFICATION
ipass TM / ipass+ TM 0.8 mm PITCH I/O CONNECTOR SYSTEM EXTERNAL ipass / ipass+ of TABLE OF CONTENTS.0 SCOPE... 3.0 PRODUCT DESCRIPTION... 3. PRODUCT NAME AND SERIES NUMBER(S)... 3. DIMENSION, MATERIALS,
More informationPC/104, PC/104 -Plus, VarPol connectors
164 PC/104, PC/104 -Plus, VarPol connectors Definitions 166 Technical specifications 168 Hole specifications 169 PC/104 170 PC/104-Plus 172 Accessories: PC/104 and PC/104-Plus 174 VarPol angled pin header
More informationUTS discrete wire sealing
Technical characteristics Mechanical Durability: 250 matings & unmatings Vibration resistance: Sinusoidal vibrations per CEI 605-4 - from 10 to 2000 Hz Thermal shock: 5 cycles 30 min. from -40 C to 105
More informationMicro-USB connectors meeting requirements of USB 2.0 Standard
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
More informationFigure 1 (end) Updated document to corporate requirements Added text to Paragraph 2.4
This specification covers the requirements for application of ELCON Drawer Series Connectors: True Hot Plug, Blind Mating Mixed Signal and Power Connectors. These connectors are designed for use in pluggable
More informationTechnical Specifications
Technical Specifications Series Fischer Connectors S SaintPrex, Switzerland Phone +41 21 800 95 95 Fax +41 21 800 39 24 www.fischerconnectors.com mail@fischerconnectors.ch Multipole Product range covered:
More informationGlenair Military and Industrial Power and Signal Connectors
Glenair Military and Industrial Power and Signal Connectors Series ITS (And FRITS) 5015 Type Reverse Bayonet Connectors Derived from MIL-DTL-5015 and VG95234 Mating mechanism (3 reverse bayonets at 120
More informationSelector Switch Type 08
Compact and versatile 2 positions multi wafer selector switch For PCB mounting 25,000 switching cycles with up to 9.0 Ncm switching torque Gold plated contacts: micron Robust metal housing with metal shaft
More informationMicro-USB connectors meeting requirements of USB 2.0 Standard
NEW Micro-USB connectors meeting requirements of USB 2.0 Standard ZX Series Note: Contact us to ascertain whether a TID number has been acquired for an individual product. Overview Extremely small high
More informationHARTING Ethernet Cabling 8-poles Overview
Ethernet Cabling 8-poles Overview RJ45 Connectors [on page 8] System cables [on page 12] Distribution modules and Outlets [on page 17] Connectors [on page 20] System cables [on page 26] Panel feed-throughs
More informationSD Memory Card Connectors
SD Memory Card Connectors DM Series Withstands higher force of card insertion. Card Standard type Metal cover extends over the back of the connector. Features. Withstands higher force of card insertion
More information3M Pin Strip Header Single and Dual Row.100,.235 /.318 Mating Length, Straight & Right Angle, Solder Tails 929 Series
M Pin Strip Header Single and Dual Row.100,.25 /.18 Mating Length, &, Solder Tails 929 Series Stackable Gold, Matte Sn, or -Lead plating options High Temperature (PCT) plastic for Wave or IR soldering
More informationSMA Connectors. RF Coax Connectors. Product Facts
SMA Connectors Product Facts Performance to 12.4 GHz and beyond Available in various base metal options, including stainless steel, brass and zinc diecast Uses industry standard crimp tools and processes
More informationUniversal MATE-N-LOK Connector System
Universal MATE-N-LOK Connector System 2011 Tyco Electronics Corporation. All Rights Reserved. MATE-N-LOK, TE Connectivity, TE Connectivity (logo) and TE (logo) are trademarks. Other logos, products and/or
More informationIndustrial circular connectors
Industrial circular connectors M 16 M 58 010 CONINVERS - M16 to M58 circular connectors for industrial applications CONINVERS GmbH, an independent company, is the specialist for M16 to M58 circular connectors
More informationThe Wild Children of D38999
micro38999 Series High Vibration Miniature Connectors The Wild Children of D38999 A complete range of space saving compact connectors with all of the features and capabilities of D38999 for harsh applications.
More informationOutside Plant Precision Cooling Site Monitoring and Services
Emerson Network Power Connectivity Solutions Johnson 299 Johnson Avenue Waseca, MN 56093 USA Tel: 800.247.8256 Fax: 507.833.6287 www.emersonnetworkpower.com/connectivity About Emerson Network Power Connectivity
More informationFakra. Coaxial connectors. DC 6 GHz
C-Blue D-Bordeaux GPS application GSM/Mobil Phone The FAKRA (Automobile Expert Group) has therefore defined a standardised connector system for the various communication applications in cars. Our FAKRA-compliant
More information3M Pin Strip Header.100,.295 Mating Length, Straight & Right Angle, Solder Tails 929 Series
M Pin Strip Header.100,.295 Mating Length, Straight & Right Angle, Solder Tails 929 Series Stackable Tin Lead or gold plating available Solder stand-offs facilitate production wave soldering Board pin
More information1 mm Pitch Double Rows Low Profile Board-to-Cable Connectors
NEW mm Pitch Double Rows Low Profile Board-to-Cable Connectors DF series Cable.4 Socket DF- **DS-C.8 DFF(G)- **DP-V Pin Header DF- **DS-C Socket Cable 6. PCB DFF **DP-H. Pin Header PCB Features. Contact
More informationQuick Reference Guide AMP CT Connector Series
Quick Reference Guide The AMP CT connectors are a miniature wire-to-board and wire-to-wire interconnect solution. The AMP CT connector series has proven performance in its harness making capability. A
More informationODU MINI-SNAP. Miniature Cylindrical Connectors with Push-Pull-Locking Series F
Catalogue Nr.: 5--a-e ODU MINI-SNAP Miniature Cylindrical Connectors with Push-Pull-Locking Series F ODU Steckverbindungssysteme GmbH & Co. KG, Pregelstraße, D-85 Mühldorf/Inn Telefon: +9/86 /6 56-, Telefax:
More informationPowermate Range Pitch 7.62
owermate Range itch 7.62 in headers Socket connectors CB connection Solder connection SV 7.62/90 500 V / 43 A SV 7.62/180 500 V / 41 A.2.4 Cable connection Clamping yoke connection Tension clamp connection
More informationwww.jinda-china.com JD15-3001 A:3.5mm mono plug to 2 3.5mm mono jacks B:3.5mm mono plug to 2 3.5mm stereo jacks JD15-3002 A:3.
CONTENT AUDIO ADAPTOR AUDIO ADAPTOR 1-6 JD15-3001 A:3.5mm mono plug to 2 s B:3.5mm mono plug to 2 s JD15-3008 A: to 2 s B: to 2 s JD15-3015 3.5mm mono plug to 2 s 2.5/3.5/6.35MM PLUGS 7-10 JD15-3002 A:
More information1/2" (12.7 mm) Conductive Plastic and Cermet Potentiometer
1/2" (12.7 mm) Conductive Plastic and Cermet Potentiometer FEATURES Robust construction High rotational life (50 000 cycles) Up to three sections PC support plates Rotary switches and solder lugs terminals
More information0.8 U N /0.5 U N 0.8 U N /0.5 U N 0.8 U N /0.5 U N 0.2 U N /0.1 U N 0.2 U N /0.1 U N 0.2 U N /0.1 U N
55 Series - General purpose relays 7-10 A Features 55.12 55.13 55.14 Printed circuit mount, general purpose 2, 3 & 4 Pole relays 55.12-2 Pole 10 A 55.13-3 Pole 10 A 55.14-4 Pole 7 A AC coils & DC coils
More informationPin/terminal: Wire protect: Screw/torque: Dubilier Connectors. Plan Pin Dia 1.0 Rec-hole Size 1.1. Pin/terminal: Wire protect: Screw/torque:
TERMINA BOCKS mm PITCH VERTICA MOUNT mm Pitch and 3 pole interlocking 4- pole solid, end stackable U94v-0 Flame retardant material.mm wire acceptance U/VDE approved Screw terminal 7.A/380V Dielectric Strength:
More informationCategory 6 Solutions. 4. Category 6 Solutions. 09/08 400836IN TrueNet Structured Cabling. Introduction... 4.2. Cable... 4.3. Patch Panels... 4.
Category 6 Solutions Introduction... 4.2 Cable... 4.3 Patch Panels... 4.4 Modules... 4.6 Patch Cords... 4.12 Outlets... 4.16 Faceplates...4.18 4. 1 Search Category 6 Solutions Introduction ADC KRONE s
More informationD7 Series Standard and Full Featured. Standard DPDT 24V AC 120V AC 240V AC 12V DC 24V DC 120V AC 110V DC 240V AC 6V AC 6V DC 12V AC 12V DC 24V AC
April 00 D Series Standard and Full Featured - Catalogue Number Structure Table -. D Series Catalogue Numbering System Family Type DPR = Standard Relay DPF = Full Featured Relay Contact Configuration =
More informationSwitches SWITCHES SWITCHES
Switches Manufactured from Stainless Steel, Bulgin s extensive range of vandal resistant security switches are designed with a high resistance to wear and tear, corrosion and harsh use in potentially hostile
More information