NEMA Push Button Specifications

Transcription

1 Tehnil Dt NEM Push utton Speifitions tlog Numers 800T nd 800 Topi Pge 800T/ Speifitions 2 800T/ DevieNet Sttions 4 800T/ Trigger tion E-stops 5 800T/ Momentry ontt Push uttons 7 800T/ Seletor Swith T/ Pilot Lights T/ Push-Pull nd Twist-to-relese Devies T luster Pilot Lights T Toggle Swithes T Seletor Push utton Momentry ontt Flip Lever Devies T/ Protetive oot pplition Informtion T/ pproximte Dimensions T/ Typil Pilot Light Wiring Digrms Push utton Enlosures 41 dditionl Resoures These douments ontin dditionl informtion onerning relted produts from Rokwell utomtion. Resoure Industril utomtion Wiring nd Grounding Guidelines, pulition Produt ertifitions wesite, Provides generl guidelines for instlling Rokwell utomtion industril system. Provides delrtions of onformity, ertifites, nd other ertifition detils. You n view or downlod pulitions t To order pper opies of tehnil doumenttion, ontt your lol llen-rdley distriutor or Rokwell utomtion sles representtive.

2 800T/ 30.5 mm Push uttons NEM Push utton Speifitions Speifitions Eletril Rtings ontt rtings Refer to the ontt rtings tles on pge Dieletri strength 2200V for one minute, 1300V for one minute (Logi Reed) Virtion Shok Degree of protetion Mehnil design life yles Mehnil Rtings z, 1.52 mm displement (pek-to-pek) mx./ 10 G mx. (exept Logi Reed) 1/2 yle sine wve for 11 ms 25 g (ontt frgility) nd no dmge t 100 g 1/4/12/13 (800T); 1/4/4/12/13 (800); EN/IE IP66/65 (Momentry, non-illuminted, 10,000,000 min. flush nd extended hed) Push uttons (Momentry, illuminted) 250,000 min. (Push-pull/twist-to-relese) 250,000 min. Seletor swithes (Non-illuminted) 1,000,000 min. (Illuminted, key-operted) 200,000 min. Potentiometers 25,000 min. ll other devies 200,000 min. ontt opertion Shllow, mini, nd low-voltge ontt loks: Slow, doule mke nd rek Logi Reed nd seled swith ontt loks: Single rek mgneti Wire guge/terminl srew torque #18 14 WG (#18 10 Mx Duty) / 6 8 l in Typil operting fores Flush, extended utton, stndrd mushroom, jumo plsti mushroom: 2 ls mx. pertors without ontt loks Jumo nd extended luminum mushroom hed: 3.95 ls mx. Mintined seletor swith: 3.6 in l mx. Spring return seletor swithes 3.6 in l to stop, 0.2 in l to return Illuminted push uttons nd push-to-test pilot lights 5 l mx. 2-position push-pull 8.0 l mx. push or pull 3-position push-pull 8 l mx. push to in position or pull to enter position (15 l mx. pull to out position) Twist-to-relese or push-pull 9 ls mx. push or pull 30 in oz mx. twist, 6 in oz minimum return Potentiometer Rottionl torque 3 12 in oz; stopping torque 12 in l (minimum) 1 l Logi Reed 1 l mx. Seled swith 3 l mx. t in. plunger trvel ontt loks Stkle seled swith 1 l mx. MxDuty 1.4 l mx. PenTUFF 1.4 l mx. Self Monitoring 1.6 l Environment Temperture rnge perting F ( ) Storge F ( ) Note: perting tempertures elow freezing re sed on the sene of moisture nd liquids. onsult your lol Rokwell utomtion sles offie or llen-rdley distriutor for use in lower temperture pplitions. umidity 50 95% R from F (25 60 ) per Proedure IV of MIL-STD-810, Method yling test Performne Dt Performne dt given in this pulition is provided only s guide for the user in determining suitility nd do not onstitute performne wrrnty of ny kind. Suh dt my represent the results of elerted testing t elevted stress levels, nd the user is responsile for orrelting the dt to tul pplition requirements. LL WRRNTIES S T TUL PERFRMNE, WETER EPRESS R IMPLIED, RE EPRESSLY DISLIMED. Illuminted Trigger tion E-stops re rted for 150,000 min. mehnil opertions when using t. No. 800T-D4S Self-Monitoring ontt loks (SMs). 2 Rokwell utomtion Pulition 800-TD009-EN-P

3 NEM Push utton Speifitions ontt Rtings Minimum: 24V, 24 m Mximum therml ontinuous urrent I th 10 /2.5 D. ulletin 800T units with 800T- ontts hve rtings s follows: Mx. pertnl. Utiliztion tegory Rted pertionl urrents Volts U e IE NEM Volts U e Mke rek D 600 D-13 Q V V V 720V 10 For pplitions elow 17V/5 m, PenTUFF or Logi Reed ontts re reommended. Eletril design life yles: 1,000,000 (t mx. rted lod) Explosion-Proteted ontt Rtings Mx. pertnl. Utiliztion tegory Rted pertionl urrents Volts U e IE NEM Volts U e Mke rek D 600 D-13 Q600 Seled Swith ontt Rtings Minimum: 5V, 1 m Mximum ontinuous urrent I th 5. ulletin 800T units hve ontrol iruit rtings with seled swith ontt loks s follows: Mx. pertnl. Utiliztion tegory Rted pertionl urrents Volts U e IE NEM Volts U e Mke rek D 300 D-13 P V V V 3 Mx. pertnl. Utiliztion tegory Rted pertionl urrents Volts U e IE NEM Volts U e Mke rek D 150 D-13 Q V V 15 Logi Reed ontt Rtings Minimum D: 5V, 1 m Mximum D: 30V, 0.06, : 150V, 0.15 Should only e used with resistive lods. Eletril design life yles: 200,000 (t mx. rted lod) 69V V V 720V 10 Mximum therml ontinuous urrent Ith = 10 Minimum low energy swithing lod: 17V D, 5 m Eletril design life yles: 1,000,000 (24V D, 25 m) Virtion: 5 g, 0.7 mm pek-to-pek displement, sine sweep z / IE Shok: 15 g (800-TFR_ trigger tion E-stops), 50 g (ll other devies) / IE Stkle Seled Swith ontt Rtings Minimum: 5V, 10 m (digitl); 24V, 1 m (nlog) Mximum ontinuous urrent I th 2.5. ulletin 800T units hve ontrol iruit rtings with seled swith ontt loks s follows: 180V T/ 30.5 mm Push uttons PenTUFF (Low Voltge) ontt Rtings Minimum D: 5V, 1 m Mximum therml ontinuous urrent I th 2.5 /1.0 D. ulletin 800T units with 800T-V ontts hve rtings s follows: Mx. pertnl. Utiliztion tegory Rted pertionl urrents Volts U e IE NEM Volts U e Mke rek D 150 D-13 R150 Snp tion ontt Rtings Mx. pertnl. Volts U e 300 ontt Rting Designtion 300 D 250 Time Dely ontts V 15 28V V 1.5 Rted pertionl urrents Volts U e Mke rek V MxDuty ontt Rting Mximum therml ontinuous urrent I th 24. Pilot Duty 120V, 12 ; 24V D, 10 Motor Rtings 120V, 1.5 p; 240V, 3 p; 24V D, 10 FL/60 LR 720V 10 Mx. pertnl. ontt Rting Rted pertionl urrents Volts U e Designtion Volts U e Mke rek V 360V Note: This devie is not rted for D pplitions. djustment rnge: s ± 25% I th = 5 Mterils Used in pertors Thermoplsti Polyester Thermoplsti Polyester (Fierglss Reinfored) Non-illuminted utton ps ushings Mounting Rings Glss Filled rystlline Nylon Sokets Thrust wsher Trnsprent morphous Nitrile (Syntheti Ruer) Nylon Gskets nd internl sels Pilot light lens p Illuminted utton ps Minerl Filled Nylon Trim wsher s ompline UL 508 ertifitions UL Listed (File No. E14840, E10314 Guide No. NKR, NIV, NISD) S ertified (File No. LR1234, LR11924) S 22.2, No. 14 E Mrked (EN/IE , EN/IE , EN IS 13850) Rokwell utomtion Pulition 800-TD009-EN-P 3

4 800T/ 30.5 mm Push uttons NEM Push utton Speifitions DevieNet Sttions Two- Unit 800T Three- Unit 800T Four- Unit 800T V rienttion Vertil orizontl Enlosure Style Grey Yellow 2-hole K 3-hole L 4-hole M G E-stop only N pertor s Non-illuminted flush (800T-*) Non-illuminted extended (800T-*) Non-illuminted mushroom (800T-D*) D Illuminted mushroom (800T-QM*) E Illuminted extended (800T-Q*) F Illuminted gurded (800T-Q*) G 2-position SS mintined (800T-2*) 3-position SS mintined (800T-J2*) J Enhned pilot light (800T-Q*) Non-illuminted 2-position push/pull K (800T-F*) Non-illuminted push/pull twist-to-relese L (800T-FT*) Illuminted 2-position push/pull M (800T-FQ*) N 2-position key SS (800T-33*) P 3-position key SS (800T-J44*) 2-position SS spring return from right Q (800T-5*) 3-position SS spring return from ll R (800T-J91*) Illuminted 2-position SS mintined T (800T-24**) Illuminted 3-position SS mintined U (800T-24J**) Non-illuminted 3-position push/pull V (800T-FM*) W Potentiometer d d e (ole ne +d) (ole Two +d) d d d e (ole ne +d) (ole Two +d) (ole Three +d) d d d d e (ole ne +d) (ole Two +d) (ole Three +d) (ole Four +d) olor/text 1 Green 2 lk (non-illuminted only) 3 rnge (non-illuminted only) 4 Grey (non-illuminted only) 5 White 6 Red 7 lue 8 ler (illuminted only) Yellow (non-illuminted)/ 9 mer (illuminted) Green with Strt legend Red with Stop legend Red with E-Stop legend D lk with ff/n legend E lk with nd/ff/uto legend Red with Push to Stop/Pull to F Strt legend G lue with Reset legend Red with Power n legend N/ (i.e. key ss) d E F G K L M N P Q R U W ole 4 ole 3 ole 2 ole 1 e ole 1 ole 2 Externl I/ Version No externl I/ 1 input/1 output (sinking) 1 input/1 output (souring) 2 input 2 output (souring) 1 E-stop lok 2 E-stop loks 2 input + 2 input 2 input + 2 output (souring) 1 input/1 output (sinking) + 1 E-stop lok 1 input/1 output (souring) + 1 E-stop lok 1 input/1 output (sinking) + 2 E-stop loks 1 input/1 output (souring) + 2 E-stop loks 2 input + 1 E-stop lok 2 input + 2 E-stop loks 2 output (souring) + 1 E-stop lok 2 output (souring) + 2 E-stop loks 2 input + 1 input/1 output (sinking) pertor s N nd P from Tle must hoose olor/text option from Tle d. pertor s K nd L from Tle my e used s Emergeny Stops. To e vlid s n E-Stop, the opertors must use olor/text option from Tle d nd it must e pled in the lst hole position in the enlosure. n E-Stop onnetor lso must e hosen from Tle e. Enlosure Style option G from Tle n only selet one opertor from Tle. Vlid options re K nd L with E-Stop. Externl I/ Versions F, L, M, Q, nd U reeive only one ontt lok for the externl E-Stop string. These onnetors re rted to 3. If more thn 3 of urrent is needed or if there re two E-Stop strings, use Externl I/ Versions G, N, P, R, nd W. These versions reeive two ontt loks. This llows for 6 of swithing or for two E-Stop strings. This is n 8-in/4-out devie. 2-in/1-out is ssigned to eh hole position in the enlosure. If 2-hole enlosure is seleted, 4-in nd 2-out re ssigned internlly nd up to 4 unssigned I/ points n e ssigned to externl onnetors. This devie ontins up to two physil externl I/ onnetors. The + symol in the field of Tle e indites tht two externl onnetors exist. If n E-Stop onnetor is used, 2 unssigned I/ points n e ssigned to the other onnetor. ville for ertin pplitions, plese ontt your lol llen-rdley distriutor. 4 Rokwell utomtion Pulition 800-TD009-EN-P

5 NEM Push utton Speifitions 800T/ 30.5 mm Push uttons 2-Position Red Trigger tion Twist-to-Relese, Non-Illuminted Tmper resistnt front-of-pnel mounting nd non-removle opertor hed omplint with glol E-stop stndrds, inluding EN IS nd EN t. No. 800T-TFJET6 t. No. 800T-TFLET6 t. No. 800T-TFK6 t. No. 800-TFRT6 Protetion Rting 800 T TF T 6 D2 T Metl, 4/13 Plsti, 4/4/13 Finger-Sfe Gurds No gurds Gurds on terminls ed 800T 4/13 d e 800 4/4/13 TF (45 mm) mushroom hed TFR TFJ Jumo (60 mm) mushroom hed TFRJ TFJE Jumo (60 mm) mushroom hed with "E-STP" TFRJE TFK 45 mm mushroom hed key relese TFL 63 mm nodized luminum hed TFLE 63 mm nodized luminum hed with "E-STP" T d Relese Funtion Note: = losed/ = pen onfigurle only with FK hed type. olor Key relese Twist relese pertor Position ut In e ontt lok(s) No ontts on opertor D2 4 2 N.. PenTUFF (Low Voltge) D2V V Rokwell utomtion Pulition 800-TD009-EN-P 5

6 800T/ 30.5 mm Push uttons NEM Push utton Speifitions 2-Position Red Trigger tion Twist-to-Relese, Illuminted Tmper resistnt front-of-pnel mounting nd non-removle opertor hed omplint with glol E-stop stndrds, inluding EN IS nd EN LED illumintion provided s stndrd t. No. 800T-TFTS00R t. No. 800T-TFJETS00R t. No. 800-TFRTS00R t. No. 800-TFRJETS00R 800 T TFT Q 2 R Protetion Rting T Metl, 4/13 Plsti, 4/4/13 Finger-Sfe Gurds No gurds Gurds on terminls ed 800T 4/13 d e f 800 4/4/13 TFT (45 mm) mushroom hed TFRT TFJT Jumo (60 mm) mushroom hed TFRJT TFJET Jumo (60 mm) mushroom hed with "E-STP" TFRJET P Q d Illumintion ption Trnsformer with LED lmp Universl with LED lmp e Voltge Trnsformer V 50/60 z V 50/60 z V 50/60 z V 50/60 z Universl V /D ontt f Trget N.. N../ N..L../ S.M... D2 D4S G1 D2V V G1V Note: = losed/ = pen ontt loks No ontts 1 S.M... 2 N N.. PenTUFF (Low Voltge) 2 N N.. 6 Rokwell utomtion Pulition 800-TD009-EN-P

7 NEM Push utton Speifitions 800T/ 30.5 mm Push uttons Momentry ontt Push utton Devies, Non-Illuminted Flush ed Unit t. No. 800T-1 Extended ed Unit t. No. 800T-6 ooted Unit t. No. 800-R2 ootless Flush ed Unit t. No. 800-R1 800 T 1 d e f Protetion Rting T Metl, 4/13 Plsti, 4/4/13 Finger-Sfe Gurds No gurds Gurds on terminls pertor 800T 4/ /4/13 Flush hed R Extended hed R D Mushroom hed DR D Mushroom hed less olor p ootless gurded hed DR GR ooted hed R d olor p Used only when ordering pertor D/DR 1 Green 2 lk 3 rnge J d (ont'd) olor p 4 Grey 5 White 6 Red 7 lue 9 Yellow e Speil Mushroom ed Jumo mushroom hed plsti Jumo mushroom hed L metl Note: Speil mushroom hed options only pply to mushroom hed opertor type ode D/DR (Tle ). D1 D2 D3 D4 D5 D f ontt lok(s) No ontts 1 N.. 1 N..E.M. L.. 1 N.. (Mini) (Mini) L N.. 2 N.. 2 N.. L N N.. D1V D2V D3V D4V V V T S M N D1R D2R 2R 4R R R f (ont'd) ontt lok(s) PenTUFF (Low Voltge) 1 N.. 1 N..E.M. L.. 2 N N.. Time Dely 1 N.. Depress lose, delyed opening Depress open, delyed losure Snp tion 2 N N.. lss 1, Div. 2 Logi Reed 1 N.. 2 N.. 2 N.. 2 N N.. D1P D2P P P D1Y D2Y 2Y 4Y Y Y f (ont'd) ontt lok(s) lss 1, Div. 2 Seled Swith 1 N.. 2 N N. Stkle Seled Swith 1 N.. 2 N.. 2 N.. 2 N N. Time Dely ontts Series field instllle kits n only e used with Series T or lter opertors. djustle rnge of 0.5 to 15 s + 25%. Mximum ontinuous urrent Ith 5. Snp tion ontts Snp-tion ontts feture quik mke, quik rek snption mehnism tht is only ville on ftory ssemled units. Mximum ontinuous urrent I th 10. Underlying opertors re extended hed. oot mteril is hlorosulfonted polyethylene. Not ville for ooted opertors. 2 nd 2R ontt loks nnot e stked upon, ut n stk on other ontt loks. Jumo mushroom heds not ville in white olor. Rokwell utomtion Pulition 800-TD009-EN-P 7

8 800T/ 30.5 mm Push uttons NEM Push utton Speifitions Momentry ontt Push utton Devies, Illuminted Extended ed Without Gurd t. No. 800T-P16R Extended ed without Gurd t. No. 800-PR16R 800 T P 16 R Protetion Rting T Metl, 4/13 Plsti, 4/4/13 Finger-Sfe Gurds No gurds Gurds on terminls Power Module 800T 4/13 P Q M MJ Trnsformer (or dul input) Full voltge/ Universl d ed d e f g h 800 4/4/13 PR QR Extended hed with gurd Extended hed without gurd Mushroom Jumo mushroom D T T e Illumintion ptions Inndesent LED Dul Input Diode type Trnsformer rely type Trnsformer rely type LED f Voltge Trnsformer V, 50/60 z V, 50/60 z V, 50/60 z V, 50/60 z Full Voltge Inndesent 12 12V /D 24 24V /D 48 48V /D V /D V /D Universl LED V /D Dul Input V 24 24V /D G R W g Lens olor No lens with stndrd ontts No lens if ordering ny ontts other thn stndrd mer lue ler Green Red White Diode type dul input provides iruit isoltion vi opposing diodes. Not reommended for use with solid-stte outputs. Dul input diode only. h ontt lok(s) No ontts D1 1 N.. PenTUFF (Low Voltge) V lss 1, Div. 2 Logi Reed R Seled Swith P Stkle Seled Swith Y 8 Rokwell utomtion Pulition 800-TD009-EN-P

9 NEM Push utton Speifitions 800T/ 30.5 mm Push uttons Momentry ontt Push utton Devies, Non-Illuminted With Two-olor Molded Legend ps t. No. 800T-00 with t. No. 800T-L103W instlled Protetion Rting T Metl, 4/13 Plsti, 4/4/13 Finger-Sfe Gurds No gurds Gurds on terminls pertor 800T 4/ /4/13 Flush hed R Extended hed R 800 T 103W d e d p Text/olor Text 101W 103W 105W STRT N 121W STRT / 202W 204W 207W 208W 209W 210W 212W 213W 214W 215W 216W 217W 218W 219W 220W 222W STP RESET FRWRD REVERSE JG UP DWN RISE LWER IN UT IG LW STP / STRT STRT / 602W 604W 606W 622W 707W 711W STP FF STP / RESET R p Green lk White Red lue olor Text White White lk White White D1 D2 D3 D4 D5 D D1P D2P P P D1Y D2Y 2Y 4Y Y Y t. No. 800-R00 with t. No. 800T-L604 instlled e ontt lok(s) No ontts 1 N.. 1 N..E.M. L.. 1 N.. (Mini) (Mini) L N.. 2 N.. 2 N.. L N N.. lss 1, Div. 2 Seled Swith 1 N.. 2 N N. Stkle Seled Swith 1 N.. 2 N.. 2 N.. 2 N N. D1V D2V D3V D4V V V T S M N D1R D2R 2R 4R R e (ont'd) ontt lok(s) PenTUFF (Low Voltge) 1 N.. 1 N..E.M. L.. 2 N N.. Time Dely 1 N.. Depress lose, delyed opening Depress open, delyed losure Snp tion 2 N N.. lss 1, Div. 2 Logi Reed 1 N.. 2 N.. 2 N.. R 2 N N.. 2 nd 2R ontt loks nnot e stked upon, ut n stk upon other ontt loks. Rokwell utomtion Pulition 800-TD009-EN-P 9

10 800T/ 30.5 mm Push uttons NEM Push utton Speifitions 2-Position Seletor Swith Devies, Non-Illuminted Kno pertor t. No. 800T-2 Kno Lever pertor t. No. 800T-17 Kno pertor t. No. 800-R2 800 T 2 d e Protetion Rting T Metl, 4/13 Plsti, 4/4/13 Finger-Sfe Gurds No gurds Gurds on terminls Kno Insert olors 800T 4/ /4/13 White R Pket of olored inserts R Metl Wing Lever olors olor Red G Grey d pertor nd Funtion Kno pertor Funtion 2 Mintined 4 Spring return from left 5 Spring return from right Kno Lever pertor Funtion 17 Mintined 18 Spring return from left 19 Spring return from right Metl Wing Lever pertor Funtion 11 Mintined 15 Spring return from left 16 Spring return from right ne insert of eh olor (lue, green, ornge, red, nd yellow). Trget tles re reversed from those shown. nly ville on ul. 800T, 4/13 opertors. ontt trget tles sme s those listed for stndrd ontt loks. oin Slot pertor Funtion 6 Mintined 7 Spring return from left 8 Spring return from right e ontt lok(s) ontt onfigurtion 2-Position No ontts D1 1 N.. D2 D1M D2M D1V D2V V V D1R D2R R R D1P D2P P P D1Y D2Y Y Y 2 N N.. Mx Duty (orsepower Rted) 1 N.. PenTUFF (Low Voltge) 1 N.. 2 N N.. lss1, Div. 2 Logi Reed 1 N.. 2 N N.. Seled Swith 1 N.. 2 N N.. Stkle Seled Swith 1 N.. 2 N N.. 10 Rokwell utomtion Pulition 800-TD009-EN-P

11 NEM Push utton Speifitions 800T/ 30.5 mm Push uttons 2-Position Seletor Swith Devies, Non-Illuminted (ul. 800T only) 2-Position ylinder Lok pertor t. No. 800T T 31 d e Protetion Rting T Metl, 4/ Finger-Sfe Gurds No gurds Gurds on terminls Key Removl Position Mintined pertor Funtion Key removl left Key removl right Key removl oth Spring Return From Left pertor Funtion Key removl right Spring Return From Right pertor Funtion Key removl left d Key ptions for ylinder Loks T Series Key No. T Series Key No. D018 (Std. Key) 15 T D T D T D T D T D T D T D T D T D T D T D T D118 Trget tles re reversed from those shown. ontt trget tles sme s those listed for stndrd nd PenTUFF ontt loks. Devie supplied with 2 keys. Replement key prt no. for stndrd D018 key is onsult your lol Rokwell utomtion sles offie or llen-rdley distriutor for dditionl replement key numers. e ontt lok(s) 2-Position ontt onfigurtion No ontts D1 1 N.. D2 D1M D2M D1V D2V V V D1R D2R R R D1P D2P P P D1Y D2Y Y Y 2 N N.. Mx Duty (orsepower Rted) 1 N.. PenTUFF (Low Voltge) 1 N.. 2 N N.. lss1, Div. 2 Logi Reed 1 N.. 2 N N.. Seled Swith 1 N.. 2 N N.. Stkle Seled Swith 1 N.. 2 N N.. Rokwell utomtion Pulition 800-TD009-EN-P 11

12 800T/ 30.5 mm Push uttons NEM Push utton Speifitions 3-Position Seletor Swith Devies, Non-Illuminted Kno pertor t. No. 800T-J2 Kno Lever pertor t. No. 800T-J17 Kno pertor t. No. 800-JR2 Protetion Rting T Metl, 4/13 Plsti, 4/4/13 Finger-Sfe Gurds No gurds Gurds on terminls Kno Insert olors 800T 4/ /4/13 J White JR J Pket of olored inserts JR Metl Wing Lever olors olor J Red JG Grey 800 T J 2 d e f d Kno/Lever pertors Kno pertor Funtion 2 Mintined 4 Spring return from left 5 Spring return from right 91 Spring return from oth Kno Lever pertor Funtion 17 Mintined 18 Spring return from left 19 Spring return from right 20 Spring return from oth Metl Wing Lever pertor Funtion 11 Mintined 15 Spring return from left 16 Spring return from right 141 Spring return from oth oin Slot pertor Funtion 10 Spring return from oth K1 K7 e m ption Tle 1. m nd ontt lok Funtionlity Tle ontt lok Suffix ontt lok Side White lk White lk iruits Note: = losed/ = pen K7 (Std.) K7 m (std.) K1 m K7 m K1 K7 KD7 KE7 KQ1 KQ7 KR1 KR7 KT1 KT7 KU7 V V e (ont'd) m ption K1 m K7 m KD7 m KE7 m KQ1 m KQ7 m KR1 m KR7 m KT1 m KT7 m KU7 m f ontt loks No ontts on opertor 1-800T- on white side 2 N N T-s 1 on white side/1 on lk side PenTUFF (Low Voltge) 1-800T-V on white side 2 N N T-Vs 1 on white side/1 on lk side m s R R P P Y Y f (ont'd) ontt loks No ontts lss 1, Div. 2 Logi Reed 1-800T-R on white side 2 N N T-Rs 1 on white side/1 on lk side Seled Swith 1-800T-P on white side 2 N N T-Ps 1 on white side/1 on lk side Stkle Seled Swith 1-800T-Y on white side 2 N N T-Ys 1 on white side/1 on lk side ne insert of eh olor (lue, green, ornge, red, nd yellow). nly ville on ul. 800T, 4/13 opertors. If n overlpping m is required, onsult your lol distriutor. Not ville with wing levers. See Tle 1 for m seletions nd ssoited trgets. K1 K7 K1 K7 KD7 KE7 KQ1 KQ7 KR1 KR7 KT1 KT7 KU7 12 Rokwell utomtion Pulition 800-TD009-EN-P

13 NEM Push utton Speifitions 800T/ 30.5 mm Push uttons 3-Position Seletor Swith Devies, Non-Illuminted (ul. 800T only) 3-Position ylinder Lok pertor t. No. 800T-J T J41 K1 d e f (ont d) e (ont d) f (ont'd) Protetion Rting T Metl, 4/13 J41 J42 J43 J44 J45 J46 J47 J50 J52 J51 Finger-Sfe Gurds No gurds Gurds on terminls Key Removl Position Mintined pertor Funtion Key removl left Key removl enter Key removl right Key removl ll Key removl left nd enter Key removl right nd left Key removl right nd enter Spring Return from Left Key removl enter Key removl right Key removl right nd enter J69 J38 J73 J631 Key Removl Position Spring Return from Right pertor Funtion Key removl left Key removl enter Key removl left nd enter Spring Return from oth Key removl enter d Key ptions for ylinder Loks Key No. D018 (stndrd key) 03 D D D D429 Note: Refer to pge 11 for dditionl key option odes. K1 K7 K1 e m ption K7 m (std.) K1 m K7 m K1 m Note: See Tle 1 on pge 12 for m seletions. K7 KD7 KE7 KQ1 KQ7 KR1 KR7 KT1 KT7 KU7 V V m ption K7 m KD7 m KE7 m KQ1 m KQ7 m KR1 m KR7 m KT1 m KT7 m KU7 m f ontt loks No ontts 1-800T- on white side 2 N N T-s 1 on white side/1 on lk side PenTUFF (Low Voltge) 1-800T-V on white side 2 N N T-Vs 1 on white side/1 on lk side R R P P Y Y ontt loks lss 1, Div. 2 Logi Reed 1-800T-R on white side 2 N N T-Rs 1 on white side/1 on lk side Seled Swith 1-800T-P on white side 2 N N T-Ps 1 on white side/1 on lk side Stkle Seled Swith 1-800T-Y on white side 2 N N T-Ys 1 on white side/1 on lk side If n overlpping m is required, onsult your lol Rokwell utomtion sles offie or llen-rdley distriutor. Devie supplied with 2 keys. Replement key prt no. for stndrd D018 key is See pge for dditionl replement key numers. Tle 1. m nd ontt lok Funtionlity Tle ontt lok Suffix ontt lok Side White lk White lk kts K7 (Std.) m s K1 K7 K1 K7 KD7 KE7 KQ1 KQ7 KR1 KR7 KT1 KT7 KU7 Rokwell utomtion Pulition 800-TD009-EN-P 13

14 800T/ 30.5 mm Push uttons NEM Push utton Speifitions 4-Position Seletor Swith Devies, Non-Illuminted Kno pertor t. No. 800T-N2KN4 Kno Lever pertor t. No. 800T-N17KN4 Kno pertor t. No. 800-NR2KF4 800 T N 2 KF4 d e f Protetion Rting T Metl, 4/13 Plsti, 4/4/13 Finger-Sfe Gurds No gurds Gurds on terminls Kno Insert olors 800T 4/ /4/13 N White NR N Pket of olored inserts Metl Wing Lever olors NR olor N Red NG Grey d pertor Funtion nd Kno Kno pertor Funtion 2 Mintined 3 9 Spring return from position 1 to position 2 Spring return from position 4 to position 3 Kno Lever pertor Funtion 17 Mintined Spring return from position 1 to position 2 Spring return from position 4 to position 3 Metl Wing Lever pertor Funtion 11 Mintined Tle 1. m nd ontt lok Funtionlity Tle ontt lok Suffix ontt lok Side White lk White lk iruits Note: = losed/ = pen Spring return from position 1 to position 2 Spring return from position 4 to position 3 KF4 KG4 KK4 KM4 KP4 KN4 e m ption F m G m K m M m P m verlpping m f ontt loks 800T 4/ /4/13 No ontts 2 N N T-s 1 on white side/ 1 on lk side 3 N N T-s 2 on white side/ 1 on lk side 4 N N T-s 2 on white side/ 2 on lk side m s f (ont) ontt loks 800T 4/13 PenTUFF (Low Voltge) 800 4/4/13 V 2 N N.. FF V 3 N N.. FFF V 4 N N.. FFFF lss 1, Div. 2 Logi Reed R 2 N N.. TT R 3 N N.. TTT R 4 N N.. TTTT Seled Swith P 2 N N.. PP Stkle Seled Swith Y 2 N N.. TT Y 3 N N.. TTT Y 4 N N.. TTTT ne insert of eh olor (lue, green, ornge, red, nd yellow). verlpping m. See Pulition 800T-2.8 for overlp speifitions. ontt lok mounting sme s listed for stndrd nd PenTUFF ontt loks. nly ville on ul. 800T, 4/13 opertors. See Tle 1 for proper m/ontt seletion. Not ville with wing levers. KF4 KG4 KK4 KM4 KP4 KN4 14 Rokwell utomtion Pulition 800-TD009-EN-P

15 NEM Push utton Speifitions 800T/ 30.5 mm Push uttons 4-Position Seletor Swith Devies, Non-Illuminted (800T only) ylinder Lok pertor t. No. 800T-N32KF4 800 T N31 KM4 d e f Protetion Rting T Metl, 4/13 Finger-Sfe Gurds No gurds Gurds on terminls Key Removl Position nd pertor Funtion Mintined pertor Funtion N31 Key removl position 1 N32 Key removl position 2 N33 Key removl position 3 N34 Key removl position 4 N61 Key removl ll positions (ont'd) Key Removl Position nd pertor Funtion Spring Return From Position 1 to Position 2 N132 Key removl position 2 N133 Key removl position 3 N134 Key removl position 4 N154 Key removl positions 2, 3, nd 4 Spring Return From Position 4 to Position 3 pertor Funtion N231 Key removl position 1 N232 Key removl position 2 N233 Key removl position 3 N251 Key removl positions 1, 2, nd 3 Note: = losed/ = pen verlpping m. ne lyer of ontt loks llowed, no stking. See Pulition 800T-2.8 for overlp speifitions. ontt lok mounting sme s listed for stndrd nd PenTUFF ontt loks. Devie supplied with 2 keys. Replement key prt no. for stndrd D018 key is onsult your lol Rokwell utomtion sles offie or llen-rdley distriutor for dditionl replement key numers. Tle 1. m nd ontt lok Funtionlity Tle ontt lok Suffix ontt lok Side White lk White lk iruits m s d Key ptions for ylinder Loks D Series Key No. D018 (stndrd key) 03 D D D D429 Note: Refer to pge 11 for dditionl key option odes. KF4 KG4 KK4 KM4 KP4 KN4 e m ption F m G m K m M m P m verlpping m Note: See Tle 1 for proper m seletion. KF4 KG4 KK4 KM4 KP4 KN4 V V V R R R P Y Y Y f ontt loks No ontts 2 N N T-s 1 on white side/1 on lk side 3 N N T-s 2 on white side/1 on lk side 4 N N T-s 2 on white side/2 on lk side PenTUFF (Low Voltge) 2 N N T-Vs 1 on white side/1 on lk side 3 N N T-Vs 2 on white side/1 on lk side 4 N N T-Vs 2 on white side/2 on lk side lss 1, Div. 2 Logi Reed 2 N N.. 3 N N.. 4 N N.. Seled Swith 2 N N.. Stkle Seled Swith 2 N N.. 3 N N.. 4 N N.. Note: ssoited trgets shown in Tle 1. Rokwell utomtion Pulition 800-TD009-EN-P 15

16 800T/ 30.5 mm Push uttons NEM Push utton Speifitions 2-Position Kno/Lever Seletor Swith Devies, Illuminted Kno pertor t. No. 800T-16R2K6 Kno Lever pertor t. No RR17K6 g pertor Funtion nd Kno Kno or No Kno pertor Funtion 2 Mintined 4 Spring return from left 5 Spring return from right Kno Lever 17 Mintined 18 Spring return from left 19 Spring return from right 1st Level 800 T 16 R 2 K6 d e f g h i j Protetion Rting T Metl, 4/13 Plsti, 4/4/13 Finger-Sfe Gurds No gurds Gurds on terminls Power Module nd Voltge Full Voltge Inndesent 12 12V /D 24 24V /D 48 48V /D Universl LED V /D Trnsformer V 50/60 z V 50/60 z For other voltges, plese onsult your lol Rokwell utomtion sles offie or llen-rdley distriutor. ul. 800T 4/13 d No. of Positions ul /4/13 2-position R G R W e Kno olor olor mer lue ler Green Red White No kno f Illumintion ptions Inndesent LED Tle 1. Seletor Swith m Trgets m (2-Position) Trget ontt lok D,, V, R, 5 E, U, W, S, 6 = losed/ = pen K6 KL8 h m ptions 2-Position pertor Funtion Mintined m Spring return m Tle 2. ontt lok Redution Rules ontt lok Sustitution omintion D + E D + D E + E M N (oth pos.) D E U F V W T R S P 2nd Level i, j ontt loks No ontts 1 N.. No ontts in this position PenTUFF (Low Voltge) 1 N.. lss 1, Div. 2 Logi Reed 1 N.. Seled Swith 1 N.. Stkle Seled Swith 5 1 N ontt loks used on white side only. Trget tles re reversed for spring return from left opertors. 16 Rokwell utomtion Pulition 800-TD009-EN-P

17 NEM Push utton Speifitions 800T/ 30.5 mm Push uttons 3-Position Kno/Lever Seletor Swith Devies, Illuminted Kno pertor t. No. 800T-16JR2K7 Kno pertor t. No JRR2K7 1st Level 800 T 16 J R 2 K7 d e f g h i j Protetion Rting T Metl, 4/13 Plsti, 4/4/13 Finger-Sfe Gurds No gurds Gurds on terminls Power Module nd Voltge Full Voltge Inndesent 12 12V /D 24 24V /D 48 48V /D Universl LED V /D Trnsformer V 50/60 z V 50/60 z For other voltges, plese onsult your lol Rokwell utomtion sles offie or llen-rdley distriutor. d No. of Positions 800T 4/ /4/13 J 3-position JR G R W e Kno olor olor mer lue ler Green Red White No kno f Illumintion ptions Inndesent g LED pertor Funtion nd Kno Kno or No Kno pertor Funtion 2 Mintined 4 Spring return from left 5 Spring return from right 91 Spring return from oth Kno Lever pertor Funtion 17 Mintined 18 Spring return from left 19 Spring return from right 20 Spring return from oth K7 K1 K7 KE7 KQ1 KT1 (oth pos.) h m ptions 3-Position pertor Funtion 7 m 1 m 7 m E7 m Q1 m T1 m i, j ontt loks No ontts Tle 1. Seletor Swith m Trgets Trget F T P 2nd Level i, j (ont'd) ontt loks No ontts in this position PenTUFF (Low Voltge) lss 1, Div. 2 Logi Reed Seled Swith Stkle Seled Swith 7 m (3-Position) K7 K1 K7 KE7 KQ1 KT1 D,, V, R, 5 E, U, W, S, 6 E, U, W, S, 6 D,, V, R, 5 D,, V, R, 5 D,, V E, U, W, S, 6 E, U, W, S, 6 E, U, W, S, 6 D,, V, R, 5 G, I J, Q J, Q J,Q J,Q E, U, W, S, 6 G,I G,I D,, V, R, 5 LEDs ville in red, green, mer, lue, nd white. White LEDs only ville in 6V, 24V, 120V, nd 130V full voltge nd ll trnsformer units. LED olor mthes lens olor, exept ler lens supplied with white LED nd white lens supplied with mer LED. ll LEDs exept 120V hve n internl shunt resistor for use with solid-stte outputs. ontt loks used on white side only. Rokwell utomtion Pulition 800-TD009-EN-P 17

18 800T/ 30.5 mm Push uttons NEM Push utton Speifitions Pilot Light Devies Trnsformer Pilot Light t. No. 800T-P16R Push-to-Test Pilot Light t. No. 800T-PT16R (Push-to-Test) 800 T P T 16 G R d e f g h Protetion Rting T Metl, 4/13 Plsti, 4/4/13 Finger-Sfe Gurds No gurds Gurds on terminls Power Module 800T 4/13 P Q Trnsformer (or dul input) Full voltge/ Universl 800 4/4/13 PR QR T D DT d Lmp Test ptions No test option Push-to-test Dul input diode Dul input trnsformer rely Note: Push-to-test supplied with ftory jumpered ontt lok. e Illumintion ptions Inndesent LED f Voltge Trnsformer V 50/60 z V 50/60 z V 50/60 z V 50/60 z Full Voltge Inndesent 12 12V /D 24 24V /D 48 48V /D V /D V /D Universl LED V /D Dul Input V 24 24V /D (Dul input diode only) Non-push-to-test pilot lights using the universl LED option nnot e ordered s ul. 800 or 800T. The terminls re finger-sfe s stndrd. Diode type dul input provides iruit isoltion vi opposing diodes. Not reommended for use with solid-stte outputs. Dul input devies (diode or trnsformer type) nnot e ordered s ul. 800 or 800T. Finger-sfe terminl gurds re not ville. LED illumintion option is not ville with diode type dul input. # Glss lens ville on 800T pilot lights only. Not ville on push-to-test units. g Lens olor olor Glss # No lens mer D lue E ler F G Green R Red J W White K V R P Y h ontt loks (Push-to-test units only) PenTUFF (Low Voltge) lss 1, Div. 2 Logi Reed Seled Swith Stkle Seled Swith 18 Rokwell utomtion Pulition 800-TD009-EN-P

19 NEM Push utton Speifitions 800T/ 30.5 mm Push uttons 2-Position Push-Pull nd Push-Pull/Twist Relese Devies, Non-Illuminted Note: jumo or lrge legend plte is reommended, if spe llows. 2-Position Push-Pull t. No. 800T-F6D4 2-Position Metl Push-Pull t. No. 800T-FLE6D4S 2-Position Push-Pull / Twist t. No. 800T-FT6D4 2-Position Push-Pull / Twist t. No. 800-FRT6D4 800 T F 1 1 d e Protetion Rting T Metl, 4/13 Plsti, 4/4/13 Finger-Sfe Gurds No gurds Gurds on terminls ed 800T 4/ /4/13 F Mushroom hed (push-pull) F FJ FJE FL FLE 90 mm nodized luminum hed (push-pull) Jumo mushroom hed (push-pull) Jumo mushroom hed (push-pull) with "E-Stop" 63 mm nodized luminum hed (push-pull) 63 mm nodized luminum hed (push-pull) with "E-Stop" FT Push-pull/twist-to-relese FRT FJT Jumo hed push-pull with twist-to-relese FRJT d olor p olor No p 1 Green 2 lk 3 rnge 4 Grey 5 White 6 Red 7 lue 9 Yellow e ontt lok(s) pertor Position ut In No ontts on opertor D1 1 N.. D2 D4 L L.. 2 N..L.. e (ont'd) ontt lok(s) pertor Position ut In No ontts PenTUFF (Low Voltge) D1V 1 N.. D2V D4V L.. V lss 1, Div. 2 Logi Reed D1R 1 N.. D2R R Seled Swith D1P 1 N.. D2P P Stkle Seled Swith 1 N.. D1Y 1 N.. D2Y Y Note: = losed/ = pen Normlly losed lte rek ontt. When utton is pushed from the UT to IN position, the mehnil detent tion of the opertor ours efore eletril ontts hnge stte. When the utton is pulled from the IN in the UT position, the eletril ontts hnge stte efore the mehnil detent ours. Devies with N..L.. ontts meet EN IS nd IE stndrds for emergeny stop pplitions. Not vlid with hed J or JT. Two 800T-D4 ontt loks supplied. Rokwell utomtion Pulition 800-TD009-EN-P 19

20 800T/ 30.5 mm Push uttons NEM Push utton Speifitions 3-Position Push-Pull Devies, Non-Illuminted Note: jumo or lrge legend plte is reommended, if spe llows. 3-Position Push-Pull t. No. 800T-FM67 3-Position Push-Pull t. No. 800-FRM T F M 1 7 d e f Protetion Rting T Metl, 4/13 Plsti, 4/4/13 Finger-Sfe Gurds No gurds Gurds on terminls ed 800T 4/ /4/13 F Mushroom hed (push-pull) FR F FJ FL 90 mm nodized luminum hed (push-pull) Jumo mushroom hed (push-pull) 63 mm nodized luminum hed (push-pull) d pertor Funtion pertor Position ut enter In FRJ M Momentry Mintined Mintined N Momentry Mintined Momentry e olor p olor No p 1 Green 2 lk 3 rnge 4 Grey 5 White 6 Red 7 lue 9 Yellow f ontt lok(s) pertor Position ut tr. In No ontts V L.. PenTUFF (Low Voltge) - L.. 2 N N..L.. 1 N.. - R P Y f (ont'd) ontt lok(s) pertor Position ut tr. In lss 1, Div. 2 Logi Reed Seled Swith Stkle Seled Swith Note: = losed/ = pen Not vlid with hed J. 20 Rokwell utomtion Pulition 800-TD009-EN-P

21 NEM Push utton Speifitions 800T/ 30.5 mm Push uttons 2-Position Push-Pull nd Push-Pull/Twist Relese Devies, Illuminted Note: jumo or lrge legend plte is reommended, if spe llows. Illuminted 2-Position Push-Pull t. No. 800T-FP16R1 2-Position Push-Pull t. No. 800T-FJEP16R1 Illuminted 2-Position Push-Pull/Twist t. No. 800T-FTP16R1 Illuminted 2-Position Push-Pull/Twist t. No. 800-FRTP16R1 800 T F T P 16 R 1 d e f g h e g h (ont'd) Protetion Rting Illumintion ptions olor p ontt loks Trnsformer olor T Metl, 4/13 Plsti, 4/4/13 Finger-Sfe Gurds No gurds Gurds on terminls ed 800T 4/13 F FJ FJE Mushroom hed Jumo mushroom Jumo mushroom (push-pull) with "E-Stop" d pertor Funtion Push-pull # T Push-pull/twist 800 4/4/13 FR FRJ P P Q Q D DT DT Inndesent LED Full Voltge Inndesent Universl LED Dul Input Diode type Trnsformer rely type Trnsformer rely type LED f Voltge Trnsformer V 50/60 z V 50/60 z Full Voltge 24 24V /D V /D V /D Universl LED V /D Dul Input V 24 24V /D (dul input diode only) G R W ontt No p (not vlid with hed J) h Trget mer lue ler Green Red White N.. N../ N..L.. D1 D2 D4 1 5 D1V D2V ontt loks No ontts 1 N.. L.. L.. 2 N..L.. PenTUFF (Low Voltge) 1 N.. D1R D2R R D1P D2P P D1Y D2Y Y lss 1, Div. 2 Logi Reed 1 N.. Seled Swith 1 N.. Stkle Seled Swith 1 N.. See pge 18 for dditionl voltge ode options. Devies with N..L.. ontts meet EN IS nd IE stndrds for emergeny stop pplitions. # Push-Pull is ville only with ul. 800T. Diode type dul input provides iruit isoltion vi opposing diodes. Not reommended for use with solid-stte outputs. Two stked 800T-D4 ontt loks supplied. D4V L.. V Rokwell utomtion Pulition 800-TD009-EN-P 21

22 800T/ 30.5 mm Push uttons NEM Push utton Speifitions 3-Position Push-Pull Devies, Illuminted Illuminted 3-Position Push-Pull t. No. 800T-FMP16R7 Illuminted 3-Position Push-Pull t. No. 800-FRMP T F M P 16 R 1 d e f g h d f h Protetion Rting T Metl, 4/13 Plsti, 4/4/13 Finger-Sfe Gurds No gurds Gurds on terminls ed 800T 4/ /4/13 F Mushroom hed FR FJ Jumo mushroom FRJ P P Q Q D DT DT pertor Funtion pertor Position ut tr. In M Mom. Min. Min. N Mom. Min. Mom. Mom. Momentry, Min. Mintined. e Illumintion ptions Trnsformer Inndesent LED Full Voltge Inndesent Universl LED Dul Input Diode type Trnsformer rely type Trnsformer rely LED Voltge Trnsformer V 50/60 z V 50/60 z Full Voltge 24 24V /D V /D V /D Universl LED V /D Dul Input V 24 24V /D # G R W g olor p olor No p (not vlid with hed J) mer lue ler Green Red White ontt Trget N.. N.. N..L V R P Y ontt loks No ontts on opertor L.. - L.. PenTUFF (Low Voltge) lss 1, Div. 2 Logi Reed Seled Swith Stkle Seled Swith See pge 18 (Tle f) for dditionl voltge ode options. Diode type dul input provides iruit isoltion vi opposing diodes. Not reommended for use with solid-stte outputs nd neon inditors. # Dul input diode only. 22 Rokwell utomtion Pulition 800-TD009-EN-P

23 NEM Push utton Speifitions 800T/ 30.5 mm Push uttons luster Pilot Light Devies (ul. 800T nly) olor p nly With Lmps t. No. 800T-N249 omplete Unit t. No. 800T-P T P 3 16 W R R d e f g h Position 1 Position 2 Position 3 Position 4 d e, f, g, h Q P Finger-Sfe Gurds No gurds Gurds on terminls Power Module Full voltge Trnsformer Illumintion ptions nd No. of Units Inndesent 2 2 unit luster 3 3 unit luster 4 4 unit luster L2 L3 L4 LED 2 unit luster 3 unit luster 4 unit luster Voltge ptions Full Voltge 06 6V /D 12 12V /D 24 24V /D Trnsformer V, 50/60 z (ll 4 Positions) G R W olor ptions olor unit No olor mer lue ler Green Red White ustom Lens ps for luster Pilot Lights 800T N249 R G W d e f Position 1 Position 2 Position 3 Position 4 N50 N51 N52 N249 N250 N251 N252 N253 N254 N255 N256 N257 No. of Lmps/Voltge Trnsformer 4 lmps, 120V, 50/60 z 3 lmps, 120V, 50/60 z 2 lmps, 120V, 50/60 z 4 lmps, 6V /D 4 lmps, 12V /D 4 lmps, 24V /D 3 lmps, 6V /D 3 lmps, 12V /D 3 lmps, 24V /D 2 lmps, 6V /D 2 lmps, 12V /D 2 lmps, 24V /D L Illumintion ptions Inndesent LED (ll Positions) G R W, d, e, f unit mer lue ler Green Red White No olor Rted 4/13 indoor only. LEDs re ville in red, green nd mer only; lens olor mthes LED olor. Exeption: the white lens is supplied with n mer LED. White lenses use mer LEDs. LEDs ould e dversely ffeted when used with solid-stte outputs. 6V nd 12V re positive polrity. 24V LEDs re ipolr. onsult your lol Rokwell utomtion sles offie or llen-rdley distriutor for stndrd unit olors. Rokwell utomtion Pulition 800-TD009-EN-P 23

24 800T/ 30.5 mm Push uttons NEM Push utton Speifitions 1-, 2-, 3-, 4-Wy Toggle Swithes (ul. 800T only) 800T T2 2 E E d e f g Right Left Right Left T1 T2 T3 T4 Finger-Sfe Gurds No gurds Gurds on terminls pertor 1-wy toggle 2-wy toggle 3-wy toggle 4-wy toggle Tle 1. ontt lok ontt lok Sustitution omintion D + E D + D M E + E J + D J + E Tle Wy Toggle Swith m Trgets N Lever Movement nd Funtion 1- Wy 2- Wy 2- Wy 2- Wy Funtion 1 M 2 S 1 M 2 S 1 M 2 S D 1 M 2 S F K 1 M M 2 M S 3 S S 4 S M 1 M M 2 M S 3 S S 4 S M 1 M M 2 M S 3 S S 4 S M 1 M M 2 M S 3 S S 4 S M 1 M M 2 M S 3 S S 4 S M 1 M M 2 M S 3 S S 4 S M ontt onfigurtion Suffix Position ontt/side Up Left enter Right Down Right Side Left Side D,, V, R, 5 E, U, W, S, 6 J, Q G, I E, U, W, S, 6 D,, V, R, 5 G, I J, Q (ont'd) Lever Movement nd Funtion Funtion 1 M M M 2 M M S 3 M S M 4 M S S 5 S M M 6 S S M 7 S M S 3-8 S S S Wy 1 M M M 2 M M S 3 M S M 4 M S S 5 S M M 6 S S M 7 S M S 8 S S S 3- Wy 4- Wy 1 M M M 2 M M S 3 M S M 4 M S S 5 S M M 6 S S M 7 S M S 8 S S S 1 M M M 2 M M S 3 M S M 4 M S S 5 S M M 6 S S M 7 S M S 8 S S S 1 M M M M 2 M M M S 3 M M S M 4 M M S S 5 M S M M 6 M S S M 7 M S M S R 8 M S S S 1 S M M M 2 S M M S 3 S M S M 4 S M S S 5 S S M M 6 S S S M 7 S S M S T 8 S S S S Note: M = Mintined, S = Spring Return 2 nd 2R ontt loks nnot e stked upon, ut they n stk on other ontt loks. d, e, f, g ontt loks No ontts (ll pos.) D 1 N.. E G 1 N..E.M. J L.. No ontts in this position PenTUFF (Low Voltge) 1 N.. U I 1 N..E.M. Q L.. F lss 1, Div. 2 Logi Reed V 1 N.. W T Seled Swith R 1 N.. S P Stkle Seled Swith 5 1 N Rokwell utomtion Pulition 800-TD009-EN-P

25 NEM Push utton Speifitions 800T/ 30.5 mm Push uttons Seletor Push utton Devies (ul. 800T only) Seletor Push utton t. No. 800T-K2 800T KD 2 G J D E d e f g Right Left Right Left K K K K KD KE Finger-Sfe Gurds No gurds Gurds on terminls m nd ed m with flush opertor m with extended opertor m with flush opertor m with flush opertor D m with flush opertor E m with flush opertor Note: See Tle 1 for Trget desription of eh m. olor p olor 1 Green 2 lk 6 Red Sleeve Position (ll pos.) D E G J U I Q F d, e, f, g ontt loks No ontts on opertor 1 N.. 1 N..E.M. L.. No ontts in this position PenTUFF (Low Voltge) 1 N.. 1 N..E.M. L.. Tle 1. Seletor Push utton m Trgets (Note: = losed/ = pen) m d, e, f, g (ont d) ontt loks lss 1, Div. 2 Logi Reed V 1 N.. W T Seled Swith R 1 N.. S P Stkle Seled Swith 5 1 N Tle 2. ontt lok Redution Rules ontt lok Sustitution omintion Sustitute D + E D + D M E + E N J + D J + E K/K K K KD KE utton Free utton Pressed utton Free utton Pressed ontt lok Side Right Left Right Left Right Left Right Left Right Left D,, V, R, 5 D,, V, R, 5 E, U, W, S, 6 E, U, W, S, 6 E, U, W, S, 6 E, U, W, S, 6 E, U, W, S, 6 E, U, W, S, 6 D,, V, R, 5 D,, V, R, 5 D,, V, R, 5 D,, V, R, 5 D,, V, R, 5 D,, V, R, 5 D,, V, R, 5 D,, V, R, 5 J or Q J or Q E, U, W, S, 6 J or Q J or Q G or I G or I G or I G or I G or I G or I E, U, W, S, 6 J or Q J or Q E, U, W, S, 6 E, U, W, S, 6 Rokwell utomtion Pulition 800-TD009-EN-P 25

26 800T/ 30.5 mm Push uttons NEM Push utton Speifitions Momentry ontt Flip Lever Devies (ul /4 only) Finger-Sfe Gurds Flip Lever pertor t. No. 800-WK42 No gurds Gurds on terminls pertor olor 4 Grey 6 Red pertor s 20 UT 1 STP 21 RISE 2 STRT 22 RESET 3 LSE 23 REVERSE 4 DWN 24 RIGT 5 EMERG. STP 25 RUN 6 FST 26 SEND SPEED 7 FRWRD 27 SLW 8 FULL SPEED 28 TEST 9 IG 29 TIRD SPEED 10 IN 30 UP 11 IN JG 32 I 13 LEFT 33 VNT 14 LW 34 UVRIR 15 LW SPEED 35 RRIER 16 LWER 36 MRE 17 FF 37 ESSI 18 N 38 RRET 19 PEN 800 WK 6 1 D1 D2 D3 D4 D5 D D1P D2P P P D1Y D2Y 2Y 4Y Y Y d d ontt lok(s) No ontts 1 N.. 1 N..E.M. L.. 1 N.. (Mini) (Mini) L N.. 2 N.. 2 N.. L N N.. lss 1, Div. 2 Seled Swith 1 N.. 2 N N. Stkle Seled Swith 1 N.. 2 N.. 2 N.. 2 N N. Flip Lever pertor t. No. 800-WK61 D1V D2V D3V D4V V V D1R D2R 2R 4R R R d (ont'd) ontt lok(s) PenTUFF (Low Voltge) 1 N.. 1 N..E.M. L.. 2 N N.. lss 1, Div. 2 Logi Reed 1 N.. 2 N.. 2 N.. 2 N N.. 26 Rokwell utomtion Pulition 800-TD009-EN-P

27 NEM Push utton Speifitions 800T/ 30.5 mm Push uttons Protetive oot pplition Informtion hlorosulfonted Polyethylene (syntheti ruer) Very resistnt to ttk y oxidizing hemils suh s onentrted sulfuri id nd hypohlorite solutions. lso resistnt to ttk y oils nd performs well in wide rnge of other hemils nd solvents. Good flex nd high impt resistne. This is the stndrd oot mteril supplied with 800 NEM 4/4 push uttons unless otherwise speified. Silione Superior high temperture resistne. Prtiulrly suited for use where orgni ids or vegetle oils my e present. lso superior resistne to the effets of outdoor use, suh s oxygen, ozone, nd wether. Urethne Exellent resistne to mehnil filure. Most durle oot mteril. Prtiulrly suited for use where luriting oils nd utomotive fuels my e present. lso well-suited for outdoor use. Ethylene-propylene Prtiulrly suited for high temperture pplitions. Resistnt to ttk y mny ids nd lklies, detergents, phosphte esters, ketones, lohols, nd glyols. utstnding servie in res with hot wter nd stem wsh downs. Rokwell utomtion Pulition 800-TD009-EN-P 27

28 800T/ 30.5 mm Push uttons NEM Push utton Speifitions pproximte Dimensions Dimensions in inhes (millimeters). Dimensions re not intended to e used for mnufturing purposes. Mounting Instrutions for Push uttons with Shllow loks, Mini loks, Logi Reed loks, Seled Swith loks, nd Time Dely loks (see footnotes for exeptions) Di. Drill Di. Drill Sketh illustrtes the minimum distne etween enterlines when mounting ulletin 800T/ ontrols either side-y-side, fing eh other, or one ove the other. When ontrol units re mounted so tht the ontt lok terminls fe eh other, the 2-1/4 in. (57.2 mm) dimension must e used in order to get proper eletril lerne. When ontrol units re mounted so tht the ontt lok terminls do not fe eh other, the 1-27/32 in. (46.8 mm) dimension n e used. Typil Pnel ut-ut Di. Di. hnge to 2-1/4 in. (57.2 mm) for trnsformer type pilot light, push-to-test pilot lights, illuminted seletor swithes, nd ll push-pull uttons. Note: Lrge legend plte requires minimum horizontl sping of 2-15/32 in. (62.7 mm). Vertil minimum sping dimension hnges for the following legend pltes: jumo 2-15/32 in. (62.7 mm); lrge 2-7/16 in. (61.9 mm); luster pilot light nd 2-, 3-, 4-wy swithes 2-1/16 in. (52.4 mm). Pnel Thikness Kits re shipped with three 1/16 in. (1.58 mm) gskets. Refer to tle elow for numer of wshers required for vrious pnel thiknesses. 1/16 in. (1.6 mm) (16 Guge) 7/64 in. (2.8 mm) (12 Guge) 9/64 in. (3.6 mm) (10 Guge) 3/16 in. (4.8 mm) Pnel 800T 3 wshers 2 wshers 1 wsher Thiker Thn 3/16 in. (4.8 mm) Pnel ounterore to 3/16 in. (4.8 mm) wshers 3 wshers 2 wshers 1 wsher Thiker Thn 1/4 in. (6.4 mm) Pnel ounterore to 3/16 in. (4.8 mm) ounterore to 1/4 in. (6.4 mm) Mounting Instrutions for 18 mm Smll Pilot Lights Legend Plte Preferred onstrution lternte onstrution Legend Plte Di. Drill Minimum Vertil Minimum Minimum Ø Ø orizontl Minimum t. No. 800T-N515 Devie 800T-PS, PSD, PST, QS, QST nd RST 800T-PSDT orizontl 31/32 (24.6) 1-3/64 (26.6) Dimensions Vertil 1-5/32 (29.4) 1-15/64 (31.4) 28 Rokwell utomtion Pulition 800-TD009-EN-P

29 NEM Push utton Speifitions 800T/ 30.5 mm Push uttons Dimensions in inhes (millimeters). Dimensions re not intended to e used for mnufturing purposes. Legend Plte Dimensions (ul. 800T nly) Legend Plte Jumo Legend Plte Lrge Legend Plte (utomotive Industry ) Lrge Size Push-Pull/Twist Legend Plte t. No. 800T-647 For pnel mounting only. Not for use with llen-rdley enlosures. Legend Plte Dimensions (ul. 800 nly) Round t. No. 800T-646 luster Pilot Light nd Wy Swith Silver Legend Plte t. No. 800T-619 4/4 Legend Plte 4/4 Jumo Legend Plte 4/4 Lrge Legend Plte (utomotive Industry ) 1-39/64 (41.02) 19/64 (7.62) 4/4 Round 4/4 Legend Plte (Flip Lever pertors) Rokwell utomtion Pulition 800-TD009-EN-P 29

30 800T/ 30.5 mm Push uttons NEM Push utton Speifitions Dimensions in inhes (millimeters). Dimensions re not intended to e used for mnufturing purposes. loks (ul. 800T nly) Mini ontt lok 7/8 (22.2) Deep Shllow, PenTUFF, nd Logi Reed ontt loks 1-1/8 (28.6) Deep Seled Swith lok 2 (50.8) Deep Tndem Mounting (2 shllow ontt loks stked) Stkle Seled Swith lok 1.58 (40.1) Deep Time Dely ontt lok (For Push uttons nly) Snp tion ontt lok (For Push utton nly) Dimension shown is for push uttons. Seletor swith dimension is 2-1/32 in. (51.6 mm). Dimension shown is for push uttons. Seletor swith dimension is 2-27/32 in. (72.2 mm). Dimension shown is for push uttons. Seletor swith dimension is 3-5/32 in. (80.2 mm). loks (ul. 800 nly) Mini ontt lok Seled Swith lok 2 (50.8) Deep Stkle Seled Swith lok 1.58 (40.1) Deep Shllow, PenTUFF nd Logi Reed ontt loks Dim. Momentry Push utton Mintined Push utton Seletor Swith 2 (50.8) 2 (50.8) 1-29/32 (48.4) pertor Extension ehind Pnel When mounted with thrust wsher, trim wsher, or nothed legend plte nd orret numer of ruer wshers. 30 Rokwell utomtion Pulition 800-TD009-EN-P

31 NEM Push utton Speifitions 800T/ 30.5 mm Push uttons Dimensions in inhes (millimeters). Dimensions re not intended to e used for mnufturing purposes. Push uttons nd Swithes (ul. 800T nly) Wy Swith Shipping Wt. with 2 ontt loks 6 oz (0.17 kg) Shipping Wt. with 4 ontt loks 8-1/2 oz (0.24 kg) Mehnilly Interloked Mintined ontt Push utton Shipping Wt. 1 l (0.45 kg) Push uttons nd Pilot Lights Ø Extended ed nly Flush nd Extended ed Push utton Shipping Wt. 5-1/2 oz (0.15 kg) Mushroom ed Push utton Shipping Wt. 7-1/2 oz (0.21 kg) Non-Illuminted Kno Lever nd Kno Seletor Swith Shipping Wt. 6 oz (0.17 kg) Illuminted Kno Lever nd Kno Seletor Swith Shipping Wt. 6 oz (0.17 kg) Exept jumo whih is 2-1/4 (57.2). Wing Lever Seletor Swith Shipping Wt. 8 oz (0.22 kg) oin Slot Seletor Swith Shipping Wt. 6 oz (0.17 kg) pertor Extension in Front of Pnel (ul. 800T nly) Key perted Seletor Swith Shipping Wt. 12 oz (0.34 kg) Push utton with ylinder Lok Shipping Wt. 12 oz (0.34 kg) Wole Stik Shipping Wt. 9 oz (0.25 kg) Di. ross Flts Seletor Push utton Shipping Wt. 6 oz (0.17 kg) J Potentiometer Unit Shipping Wt. 4 oz (0.11 kg) ross orners Rokwell utomtion Pulition 800-TD009-EN-P 31

32 800T/ 30.5 mm Push uttons NEM Push utton Speifitions Dimensions in inhes (millimeters). Dimensions re not intended to e used for mnufturing purposes. Push uttons nd Swithes (ul. 800 nly) ross orners ross Flts Ø ross orners Extended ed nly ross Flts ootless Flush nd Extended ed Momentry ontt Push utton Shipping Weight. 5-1/2 oz (0.16 kg) ooted Flush nd Extended ed Momentry ontt Push utton Shipping Weight. 5-1/2 oz (0.16 kg) Kno Seletor Swith Non-Illuminted Shipping Weight. 6 oz (0.17 kg) ootless Mintined ontt Push uttons Ø ross Flts ooted Mintined ontt Push uttons Shipping Weight. 1 l (0.45 kg) J Potentiometer Unit Shipping Weight. 7 oz (0.20 kg) ross orners 4 Flip Lever Shipping Weight. 8 oz (0.14 kg) Ø Mushroom ed Mintined nd Momentry Non-Illuminted Mushroom nd Push-Pull Push uttons t. No. Suffix Dimensions Shipping Weights D4 1, 5 nd 7 6 Jumo versions re 2-1/4 (57.2). ne Shllow lok Two Shllow loks Two Shllow loks nd Two Mini loks 2-1/32 (51.6) 2-1/32 (51.6) 2-7/8 (73.0) 5 oz (0.14 kg) 6 oz (0.17 kg) 8 oz (0.22 kg) rek-glss Sttion 32 Rokwell utomtion Pulition 800-TD009-EN-P