4/3, 4/2 directional valves solenoid operated
|
|
|
- Marianna Bryant
- 7 years ago
- Views:
Transcription
1 4/3, 4/2 directionl vlves solenoid operted RE /07.12 Replces: RE00157/ /10 Type L5010 (LC04Z) Size 4 Series 00 Mximum operting pressure 310 r [4500 psi] Mximum flow 25 l/m [6.6 gpm] DVI0003 Tle of contents Contents Pge Fetures 1 Ordering code 2 Hydrulic schemes 3 Function, section 4 Technicl dt 5 Chrcteristic curves 7 Performnce limits 7 Dimensions 8 Electric connections 9 Fetures - Direct solenoid operted spool vlve, stndrd version. - Spool switching is y on off solenoids with centrl tue nd removle coil. - Spring centered control spool. - For mounting on industry stndrd surfce port pttern to CETOP RP121 H-4.2-P02. - Wet pin DC solenoids with removle coil nd mnul override. - Mnul override s option (push or screw-in type). - Coil cn e rotted through Aville electricl connections: (Ex. DIN 43650); AMP JUNIOR; DT04-2P (Deutsch); Free leds.
2 2/10 Bosch Rexroth Oil Control S.p.A. LC04Z RE /07.12 Ordering Code Division Directionl Vlves L Optionl 00 = Stndrd EP = Externl push utton mnul override EF = Screw-in type mnul override Type CETOP Vlves Size NG 4 (P02) Opertion Solenoid operted C36 coil Hydrulic schemes 4/3 operted A nd B side = _ 2 4/2 operted A nd B side = _ 2 4/2 operted A side = _ 3 4/2 operted B side = _ 4 4/2 operted A nd B side with detent = _ 5 Electric connections 00 = Without coils 01** = With coils, without mting connector DIN 03 = With coils, with i-directionl diode, without mting connector verticl Amp-Junior 07 = With coils, with i-directionl diode, without mting connector DT04-2P 31 = With coils nd ipolr shethed led 350mm [13,8 in] long Voltge 00 = Without coil OB = 12V DC AD = 13V DC OC = 24V DC AC = 27V DC OD = 48V DC OE = 110V DC OV = (21.5 DC) 24V AC OW = (98 DC) 110V AC OZ = (207 DC) 230V AC Aville connections ** For connectors ordering code see dt sheet RE
3 RE /07.12 LC04Z Bosch Rexroth Oil Control S.p.A. 3/10 Hydrulic schemes _ 2 _ 2 _ 3 _ 4 _ 5 A B A B A B A B A B 0 P T P T 0 P T 0 P T P T =A201 =B201 =C201 =D201 =E201 =G201 =G209 =K201 =K209 =L201 =M201 =N201 =L501 =M501 =N501 =A301 =B301 =C301 =D301 =E301 =K301 =T301 =A361 =B361 =C361 =D361 =E361 =N301 =X301 =Y301 =A401 =B401 =C401 =D401 =E401 =K401 =T409 =A471 =B471 =C471 =D471 =E471 =N401 =X401 =Y401
4 4/10 Bosch Rexroth Oil Control S.p.A. LC04Z RE /07.12 Function, section Type L5010 The solenoid operted vlves type L 5010 provide 3-wy or 4-wy flow control, usully from port P to either port A or B, nd the consequent flow return to T from B or A respectively. The vlves re composed y centrl cst iron ody (1) which mounts on industry stndrd surfces where the flow ports nd the instlltion holes re locted; the centrl ody houses the precisely mchined directionl control spool (2) which is held in the neutrl or initil position y the return springs (4). One or two solenoids, composed y centrl tue nd surrounding coil (5), re fitted to the ody t the spool s ends: when the coils re energized, their mgnetic field develops force on the oil immersed moile plunger incorported in the tue which pushes the control spool from the initil position into shifted position where oil flow is llowed from P to either A or B. With coils (5) de-energized, the control spool (2) returns to the centrl or initil position pushed y the wshers (3) supported y the return springs (4). The coils (5) re locked on the tue y threded plstic nuts (6); the tue incorportes n externlly rechle push rod (7) which cn pushed for emergency spool shifting in cse of electric filure. Type L5010L201_, L5010M201_, L5010N201_ These vlves do not hve return springs (4) for the directionl control spool (2): the spool cn shift etween two positions, driven only y the mgnetic force developed y the two solenoids (5), nd, when the solenoids re not energized, the neutrl position of the spool is not defined. The directionl control spool holds specific position only when one of the solenoids is mintined energized. Type L5010L501_, L5010M501_, L5010N501_ In these vlves the directionl control spool hs two switched positions, ech one with mechnicl detent. Shifting of the spool s position is chieved y energizing one of the solenoids, ut it is unnecessry to mintin the coil energized in order to keep the spool shifted. (T)A P B(T)
5 RE /07.12 LC04Z Bosch Rexroth Oil Control S.p.A. 5/10 Technicl Dt (for pplictions with different specifictions consult us) Generl Vlve weight with 2 solenoids kg [ls] 1.08 [2.2] Vlve weight with 1 solenoid kg [ls] 0.82 [1.7] Vlve instlltion positions Unrestricted Amient temperture C [ F] [ ] (NBR sels) Hydrulic Mximum pressure on P, A nd B r [psi] 310 [4500] Mximum pressure on T r [psi] 250 [3626] Mximum flow l/min [gpm] 25 [6.6] Mximum flow when using spool type A201, A301, A401, A361, A471, G201, G209 Hydrulic fluid Generl properties: it must hve physicl luricting nd chemicl properties suitle for use in hydrulic systems such s, for exmple: l/min [gpm] 18 [4.7] Minerl oil sed hydrulic fluids HL (DIN prt 1). Minerl oil sed hydrulic fluids HLP (DIN prt 2). For use of environmentlly cceptle fluids (vegetle or polyglycol se) plese consult us. Fluid Temperture C [ F] [ ] (NBR) ISO 4572: β x 75 X= Permissile degree of fluid contmintion ISO 4406: clss 20/18/15 NAS 1638: clss 9 Viscosity rnge mm 2 /s Electricl Voltge type DC (AC only with RAC connection) Voltge tolernce (nominl voltge) % Duty Continuous, with mient temperture 50 C [122 F] Coil wire temperture not to e exceeded C [ F] 150 [302] Insultion clss Complince with H Low Voltge Directive LVD 73/23/EC (2006/95/EC), 2004/108/EC Coil weight with connection kg [ls] [0.44] Voltge V RAC (21,5) 110 +RAC (98) Voltge type DC DC DC DC DC DC AC AC AC Power consumption W Current (nominl t 20 C [68 F]) A RAC (207) Resistnce (nominl t 20 C [68 F]) Ω
![..+122] (NBR sels) Hydrulic Mximum pressure on P, A nd B r [psi] 310 [4500] Mximum pressure on T r [psi] 250 [3626] Mximum flow l/min [gpm] 25 [6.](/docs-images/44/21410190/images/page_5.jpg "6] Mximum flow when using spool type A201, A301, A401, A361, A471, G201, G209 Hydrulic fluid Generl properties: it must hve physicl luricting nd chemicl properties suitle for use in hydrulic systems")
6 6/10 Bosch Rexroth Oil Control S.p.A. LC04Z RE /07.12 Voltge (V) Connector type Coil description Mrking Coil Mt no. =OB DC C DC 12 DC R =OB DC AMP JUNIOR C DC 12 DC R =OB DC DEUTSCH DT 04-2P C DC 12 DC R =OB DC Cle 350 mm long C DC 12 DC R =AD DC C DC 13 DC R =AD DC DEUTSCH DT 04-2P C DC 13 DC R =OC DC C DC 24 DC R =OC DC AMP JUNIOR C DC 24 DC R =OC DC DEUTSCH DT 04-2P C DC 24 DC R =OC DC Cle 350 mm long C DC 24 DC R =AC DC C DC 27 DC R =AC DC DEUTSCH DT 04-2P C DC 27 DC R =OD DC C DC 48 DC R =OE DC C DC 110 DC R =OV RAC C DC 21.5 DC R =OW RAC C DC 98 DC R =OZ RAC C DC 207 DC R
7 RE /07.12 LC04Z Bosch Rexroth Oil Control S.p.A. 7/10 Chrcteristic curves Mesured with hydrulic fluid ISO-VG32 t 45 ± 5 C [113 ± 9 F]; mient temperture 20 C [68 F]. Spool A201, A301, A401, A361, A471, G201, G209 Curve n P>T P>A P>B A>T B>T B201, B301, B Δ psi Δ r l/min gpm B361, B C201, C301, C401, C361, C471, D201, D301, D401; D361, D E201, E301, E401, E361, E471, K201, K209, K301, K L L M M N N N N T301, T X301, Y X401, Y Performnce limits psi r l/min gpm Spool Curve n A201; A301; A401; A361; A471; G201; G209 1 B201; B301; B401; B361; B471; C201; C301; C401; C361; C471; L201; L501; M201; M501 2 E201, E301, E401; E361; E471; D201, D301, D401; D361; D471; K201, K209; K301; K401; T301; T409 3 X301; X401; Y301; Y401 4 N201; N301; N401; N501 5 The performnce curves here shown re pplicle when oil flow is trvelling in oth directions, exmple P>A nd B>T. In specil circuit schemes the performnce limits cn e lower.
8 8/10 Bosch Rexroth Oil Control S.p.A. LC04Z RE /07.12 Dimensions Required surfce finish of mting piece. 1 Tue Ø 14 mm [0.55]. 2 Blinding plug for 2 positions version. 3 Ring nut (Ø 20.4 mm) for coil locking. Torque 5 6 Nm [ ft-ls]. 4 Drilling specifictions of stndrd mounting surfce ccording to CETOP RP 121 H P02. 5 Locking screws 3 pieces: UNI 5931 (ISO 4762) hexgon socket hed cp screw M 5x25, recommended specific strength 8.8 clss. Torque 5 6 Nm [ ft-ls]. 6 Gp needed for connector removl. 7 EP type optionl override push-kno: it is pressure fitted, with dhesive, on the coil locking ring nut. Code: R EF type optionl override threded kno, fitted on the solenoid tue, nd replcing the locking ring nut. Torque 6 7 Nm [ ft-ls]. Code: R Identifiction lel.
![5 Locking screws 3 pieces: UNI 5931 (ISO 4762) hexgon socket hed cp screw M 5x25, recommended specific strength 8.8 clss. Torque 5 6 Nm [3.7 4.4 ft-ls]. 6 Gp needed for connector removl.](/docs-images/44/21410190/images/page_8.jpg "7 EP type optionl override push-kno: it is pressure fitted, with dhesive, on the coil locking ring nut.")
9 RE /07.12 LC04Z Bosch Rexroth Oil Control S.p.A. 9/10 Electric connections =00 =01 Protection clss: IP 65 with connector properly fixed. Protection clss: IP 69K with connector properly fixed. =03 =07 =31
10 10/10 Bosch Rexroth Oil Control S.p.A. LC04Z RE /07.12 Bosch Rexroth Oil Control S.p.A. Oleodinmic LC Division Vi Artiginle Sedrio, Vezzno sul Crostolo Reggio Emili - Itly Tel Fx / compct-directionl-vlves@oilcontrol.com This document, s well s the dt, specifictions nd other informtion set forth in it, re the exclusive property of Bosch Rexroth Oil Control S.p... It my not e reproduced or given to third prties without its consent. The dt specified ove only serve to descrie the product. No sttements concerning certin condition or suitility for certin ppliction cn e derived from our informtion. The informtion given does not relese the user from the oligtion of own judgment nd verifiction. It must e rememered tht our products re suject to nturl process of wer nd ging. Suject to chnge.
4/3-4/2 Directional valve with solenoid actuation
4/3-4/2 Directionl vlve with solenoid ctution RE 18305-09/12.13 1/10 L511 (LC1-DZ) Size NG6 ISO 4401-03 CETOP RP121 H-03 (CETOP 3) Series 00 Mximum operting pressure 310 r [4500 psi] Mximum flow 50 l/min
4/3-, 4/2- and 3/2- directional valves with switching time adjustment, Model 5-.WE 10 (5-chamber version)
RA 23 351/9.99 RA 23 351/9.99 Replces: 6.98, 8.9 4/3-, 4/2- nd 3/2- directionl vlves with switching time djustment, Model 5-.WE 1 (5-chmer version) Nominl size 1 Series 3X Mximum operting pressure 4569
Solenoid Operated Proportional Directional Control Valve (with Pressure Compensation, Multiple Valve Series)
Solenoid Operted Proportionl Directionl Control Vlve (with Pressure Compenstion, Multiple Vlve Series) Hydrulic circuit (Exmple) v Fetures hese stcking type control vlves show pressure compensted type
Power consumption In operation At rest For wire sizing. Rated impulse voltage Control pollution degree 3. Non-operating temperature
echnicl dt sheet SRF2A-5(-O) Rotry ctutor with emergency function for utterfly vlves orque orue 2 2 2 m m m ominl voltge AC/DC 2 V Control Control Open-close Oen-close SRF2A-5 SRF2A-5 Deenergised C C SRF2A-5-O
2/2-, 3/2- and 4/2-way poppet directional valves, solenoid actuated Model M-.SEW 6
R 22 58/9.99 Replces: 6.98 R 22 58/9.99 2/2-, 3/2- nd 4/2-wy poppet directionl vlves, solenoid ctuted Model M-.SEW 6 Nominl size 6 Series 3X Mximum operting pressure 61/915 SI (42/63 r) Mximum flow 6.6
Power consumption In operation At rest For wire sizing. Auxiliary switch
echnicl dt sheet SRF2A-S2-5(-O) Rotry ctutor with emergency function for utterfly vlves orque orue 2 2 2 m m m ominl voltge AC/DC 2 V Control Control Open-close Oen-close wo integrted uxiliry uiliry switches
2-Way heavy duty flow control, with pressure compensated, solenoid and load sensing controlled priority flow
2-Way heavy duty flow control, with pressure compensated, solenoid and load sensing controlled priority flow RE 18309-64/04.10 1/6 Replaces: RE 00171/02.07 A-VRFC2C-VEI-VS-LS 0M.28.03.80 - Y - Z Description
3-Way heavy duty flow control, with pressure compensated and solenoid controlled priority flow
1/6 RE 18309-3/06.10 Replaces: RE 18309-3/04.10 3-Way heavy duty flow control, with pressure compensated and solenoid controlled priority flow A-VRFC3C-VEI-VS 0M.43.20.80 - Y - Z Description The flow control
SOLENOID VALVES 3-4 WAY
SOLENOID VLVES - WY IE/C// CT: FP/VCR Page: 7 SHEET: / SOLENOID VLVES - - WY CV SOLENOID VLVES -WY/-POSITION /- UNF.7 5.7 The electric valve is a -way -position directional electrically controlled Slight
RPE3-04. Functional Description HA 4014 10/2010. Directional Control Valves Solenoid Operated. Replaces HA 4014 12/2007
Directional Control Valves Solenoid Operated RPE3-04 Size D 04 (02) 320 bar (4600 PSI) 30 L/min(8.0 GPM) HA 4014 10/2010 Replaces HA 4014 12/2007 4/3-, 4/2- way directional control valves with solenoid
Fluid. Flu. Fluid Fluid. uid Power d Power P. Fluid Power P. Fluid Power. Fluid Power Power. d Power. Directional Cetop Valves DCV 03.
Catalogue Directional Cetop Valves DCV 03 Power Flu uid Power d Power P wer Power Power Power Power Power d Power Power Power ower Power Power wer Power Power P Power Power Powe d Power Power Power Power
3/2 Solenoid Cartridge Valve, Size 6
/ Solenoid Cartridge Valve, Size 6 Q max = l/min, p max = 5 bar Bidirectional seat-valve shut-off, direct acting Guided valve spool and poppet Two spool variants are available Available in two mounting
Coils - Connectors. Coils Connectors. Summary. RE 18325-90/12.10 1/10 Replaces: RE 18325-90/02.10. Description
RE 18325-90/12.10 1/10 Replaces: RE 18325-90/02.10 Coils Connectors Summary Description Page Description Page Coils Coil S8-356 - CLASS H - 20 W 2-3 Coil S8-356 - CLASS H - 17 W 4 Coil S5 - CLASS H 5 Coil
Coils - Connectors. Coils Connectors. Summary. RE 18325-90/03.16 Replaces: RE 18325-90/07.15. Description
1/22 Replaces: RE 18325-90/07.15 Coils Connectors Summary Description Page Description Page Coils Coil S8-356 - CLASS H - 20 W 2-3 Coil S8-356 - CLASS H - 17 W 4 Coil S8-356 - CLASS H - 17 W - LISTED UL
RA 23 178/08.99. Functional description 1/10. 4/3-, 4/2- and 3/2 Directional Control Valves Model WE 6.. /E, Series 6X with wet pin AC or DC solenoids
4/3-, 4/- and 3/ Directional Control Valves Model WE 6.. /E, Series 6X with wet pin C or DC solenoids Size 6 (D 03) up to 5100 SI (350 ar) up to 1 GM (80 L/min) R 3 178/06.98 R 3 178/08.99 Replaces: 06.98
FUEL SYSTEMS MERCARB 2 BARREL CARBURETOR 5 B
FUEL SYSTEMS 72681 MERCARB 2 BARREL CARBURETOR 5 B Tle of Contents Pge MerCr 2 BBL Cruretor.............. 5B-1 Torque Specifictions................ 5B-1 Tools............................... 5B-1 Specifictions.......................
E4E PILOT OPERATED DIRECTIONAL CONTROL VALVE WITH ELECTRIC PROPORTIONAL CONTROL SERIES 51
83 300/100 ED E4E PILOT OPERATED DIRECTIONAL CONTROL VALVE WITH ELECTRIC PROPORTIONAL CONTROL SUBPLATE MOUNTING CETOP P05 p max 250 bar Q max (see specification table) MOUNTING INTERFACE OPERATING PRINCIPLE
OPTIMA QUADRANT / OFFSET QUADRANT
OPTIMA QUADRANT / OFFSET QUADRANT 71799 00 / Issue 1 / 15 Y Z DIMENSIONS Check the enclosure size in the tle elow mtches the showertry instlltion. = Widths: 800 Door = 780-805mm 900 Door = 880-905mm Y
MICRO COMBICON Headers for Through Hole Reflow Applications MC(V) 0,5/ G-2,5 THT 2.5 mm Pitch
MICRO COMBICON Heders for Through Hole Reflow Applictions MC(V) 0,5/ G-2,5 THT The consistent use of Through Hole Reflow plug connectors hs lso mde it necessry to extend the COMBICON THR rnge to include
TECHNICAL DATA TYPE WSL OFF-CIRCUIT TAP CHANGER
TECHNICAL DATA TYPE WSL OFFCIRCUIT TAP CHANGER SHANGHAI HUAMING POWER EQUIPMENT CO., LTD. TYPE WSL OFFCIRCUIT TAP CHANGER TECHNICAL DATA Contents 1. Generl 2 2. Technicl specifictions 2 3. Type designtion
BK-W, BKD-W. 1 Technical description
, BKD-W 1 Technicl description Rective power compenstors re designed for compensting rective power (improving power coefficient cos? ) in low voltge networks in industril sites nd division sttions.in the
Pressure reducing valve, direct operated, Type ZDR 6 D
RE 26 57/2.3 Replaces:.2 Pressure reducing valve, direct operated, ype ZDR 6 D Nominal size 6 Series 4X aximum operating pressure 2 bar aximum flow 5 L/min K 4279/ ype ZDR 6 DP2 4X/ Y Overview of contents
Control block EDD Modular Directional Valve
Control block EDD Modular Directional Valve 2 Control block EDD Modular Directional Valve Bosch Rexroth Oil Control S.p.A. introduces this innovatory Directional Control Valve size 8 which allows to create
Welch Allyn CardioPerfect Workstation Installation Guide
Welch Allyn CrdioPerfect Worksttion Instlltion Guide INSTALLING CARDIOPERFECT WORKSTATION SOFTWARE & ACCESSORIES ON A SINGLE PC For softwre version 1.6.5 or lter For network instlltion, plese refer to
DXPE*J 85 320/215 ED. DIRECtIONAL CONtROL VALVE PILOt OPERAtED, WItH OBE AND FEEDBACK. Q max (see performance table) SERIES 30
85 320/215 ED DXPE*J DIRECtIONAL CONtROL VALVE PILOt OPERAtED, WItH OBE AND FEEDBACK SUBPLAtE MOUNtINg DXPE5J CEtOP P05 DXPE5RJ ISO 4401-05 (CETOP R05) DXPE7J ISO 4401-07 (CETOP 07) DXPE8J ISO 4401-08
PILOT OPERATED PRESSURE RELIEF VALVE - Series VR4V
PILOT OPERTED PRESSURE RELIEF VLVE - Series VR4V The Veljan Pressure Relief Valve series VR4V are pilot operated and wk Internal Dra on the prciple of hydraulic balancg. These valves are used to limit
2/2 and 3/2 Way Size 6 Seat Valves
2/2 and 3/2 Way Size 6 Seat Valves Directly operated Interface and subplate dimensions according to DIN 24340 and ISO Line connection port size G 3/8" Cartridge design PN [p max. ] = 315 bar 7501856.06.12.08
Solenoid Operated Directional Valves
INDUSTRIAL FLUID POWER COMPONENTS AND SYSTEMS SERIES 35 Solenoid Operated Directional Valves SD-2B-115A-35 SDS-2H-12D-35 S-2B-115A-35 Features High Flow/ High Pressure: Up to 25 gpm / 5000 psi working
DSE5J 83 280/112 ED DIRECTIONAL VALVE WITH PROPORTIONAL CONTROL FEEDBACK AND INTEGRATED ELECTRONICS SERIES 10 SUBPLATE MOUNTING ISO 4401-05 (CETOP 05)
83 280/112 ED DSE5J DIRECTIONAL VALVE WITH PROPORTIONAL CONTROL FEEDBACK AND INTEGRATED ELECTRONICS SERIES 10 SUBPLATE MOUNTING ISO 4401-05 (CETOP 05) p max 320 bar Q max 180 l/min MOUNTING SURFACE OPERATING
AP Series Industrial Pushbutton Switch
P Series Features/Benefits IP67 sealed 1,000,000 life cycle Illumination / non-illumination Multiple colored caps Threaded or snap-in mounting Caps available separately RoHS compliant Typical pplications
Load-sensing control block in mono and sandwich plate design
Load-sensing control block in mono and sandwich plate design RE 64276/08.2010 Replaces: 08.2008 1/64 Type M4-12 Nominal size 12 Unit series 2X Nominal pressure 350 bar (pump side) Nominal pressure 420
Valve series MN-06 acc. to NAMUR, 3/2-way G1/4 750 Nl/min (0.762 Cv)
Valve series MN-06 acc. to NAMUR, 3/2-way G1/4 750 Nl/min (0.762 Cv) Order code Series and function 1) Plug socket see page 5.042. MN-06-310-HN-442 Standard coil 1) 441 = 12 V DC, 4.2 W 442 = 24 V DC,
http://www.daikinpmc.com/en/ For latest information, PDF catalogs and operation manuals Features MPa {kgf/cm 2 } 100 17.5 {175}
Solenoid Valve Features 2 For DC power supply 3 For C power supply These models realize high-pressure large-flow-rate control at 35 MPa {35 kgf/cm 2 } and 1 L/min (2) or 16 L/min (3). They are best suited
Solenoid Operated Directional Valves
INDUSTRIAL FLUID POWER COMPONENTS AND SYSTEMS SERIES 35 Solenoid Operated Directional Valves SF-2C-115A-35 S-1AY-12D-35 SD-2C-12D-35 Features High Flow/ High Pressure: Up to 40 gpm / 5000 psi working pressure*.
Cartridge Valves. Solenoid Valves. Vickers. Screw-in Cartridge Valves. Maximum Pressure 210 bar (3000 psi) Maximum Flow 227 l/min (60 USgpm)
Vickers Cartridge Valves Solenoid Valves Screw-in Cartridge Valves Maximum Pressure bar ( psi) Maximum Flow 7 l/min (6 USgpm) Rev /99 77 Introduction For over seventy years, Vickers has provided its customers
2 DIODE CLIPPING and CLAMPING CIRCUITS
2 DIODE CLIPPING nd CLAMPING CIRCUITS 2.1 Ojectives Understnding the operting principle of diode clipping circuit Understnding the operting principle of clmping circuit Understnding the wveform chnge of
Chapter 6: Check Valves
Contents Chapter : Check Valves Series Description Size Mounting Page Parker Standard DIN / ISO 1/8 1/4 3/8 1/2 3/4 1 0 10 1 25 32 Shuttle valves SSR -2 Check valves, direct operated RK / R CS SPZE SPV
Electrically operated valves Series M-05, 3/2-, 5/2- and 5/3-way G1/8 650 and 750 Nl/min (0.661 and 0.762 Cv)
Electrically operated valves Series M-05, 3/2-, 5/2- and 5/3-way G1/8 650 and 750 Nl/min (0.661 and 0.762 Cv) Order code Series and function M-05-310-HN-442 Standard coil HN at ports 2 + 4 HN at ports
Denotes New Winner s Circle Product Line. Catalog HY15-3502/US SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO. LPM/GPM BAR/PSI HIGH FLOW VALVE FAMILY
Catalog HY-5/US Contents SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO. /GPM BAR/PSI HIGH FLOW VALVE FAMILY See individual catalog pages for exact specifications. WAY SPOOL TYPE GS *... X / C9-.. Position,
ICOM JTG-II PROPANE OPTIMIZATION PROGRAM (POP) INSTALLATION MANUAL FLEET VEHICLES P13X4-9224-AA. Revision: A - Dated 2/13/13 Replaces: None
ICOM JTG-II PROPNE OPTIMIZTION PROGRM (POP) INSTLLTION MNUL P13X4-9224- Revision: - Dated 2/13/13 Replaces: None PROPNE OPTIMIZTION PROGRM OVERVIEW SYSTEM DESCRIPTION THE ICOM PROPNE OPTIMIZTION PROGRM
Tablet Charging Wall Mount 12
User's Guide Tlet Chrging Wll Mount 12 For the ltest User Instlltion Guide plese visit: www.ergotron.com User's Guide - English Guí del usurio - Espñol Mnuel de l utilisteur - Frnçis Geruikersgids - Deutsch
High Power Low Ohmic Chip Resistors <Wide Terminal type>
High Power Low Ohmic hip Resistors LTR Series Dtsheet Fetures 1) hip Resistors for current detection : 1m ~ 2) High joint reliility with long side termintions. 3) Improvement of rted
1/8 Solenoid Operated Directional Valves, DSG-01 Series
/8 Solenoid Operted Directionl Vlves, DSG-0 Series hese re Solenoid Operted Directionl Vlves of high pressure, high flow nd low pressure drop, the fetures of which cn e mterilized y employing powerful
Reasoning to Solve Equations and Inequalities
Lesson4 Resoning to Solve Equtions nd Inequlities In erlier work in this unit, you modeled situtions with severl vriles nd equtions. For exmple, suppose you were given usiness plns for concert showing
Safety for Hydraulics Leak free double check valve, pilot operated, series DERV Cartridge type, two stage
Safety for Hydraulics Leak free double check valve, pilot operated, series Cartridge type, two stage 8 1 1 General description spring closed, pilot operated, cartridge type poppet valve it holds the load
Automatic Transfer Switch
utomatic Transfer Switch Owner s Manual TS Service Entrance HS Type Transfer Switch Models: 0003-0, 100 mp, 20 Volts and 0044-1, 200 mp, 20 Volts This manual should remain with the unit. ! WUKESH, WI.
Logic Processing. Pneumatic
neumtic Logic rocessing Modulr sequencer, inline/modulr logic elements, bus mounted elements, relys, electricl opertors, impulse-counters, timers Ctlogue No.: D0C 00029UK0ev Logic rocessing Modulr sequencer
UM/22000 5/2 & 5/3 valves, solenoid and pilot actuated ISO 5599-1, ISO size 1, 2, 3 & 4 Sub-base mounted
U/ / & / valves, solenoid and pilot actuated ISO 99-, ISO size,, & Sub-base mounted Steel reinforced main seals 6 bar and bar NOO solenoid pilots with locking or non-locking manual override Low power coils
PRE3G 81 250/212 ED PILOT OPERATED PRESSURE CONTROL VALVE WITH PROPORTIONAL CONTROL AND INTEGRATED ELECTRONICS. Q max 40 l/min SERIES 12
81 250/212 ED PRE3G PILOT OPERATED PRESSURE CONTROL VALVE WITH PROPORTIONAL CONTROL AND INTEGRATED ELECTRONICS SUBPLATE MOUNTING ISO 4401-03 (CETOP 03) p max 350 bar Q max 40 l/min MOUNTING SURFACE OPERATING
Two hours UNIVERSITY OF MANCHESTER SCHOOL OF COMPUTER SCIENCE. Date: Friday 16 th May 2008. Time: 14:00 16:00
COMP20212 Two hours UNIVERSITY OF MANCHESTER SCHOOL OF COMPUTER SCIENCE Digitl Design Techniques Dte: Fridy 16 th My 2008 Time: 14:00 16:00 Plese nswer ny THREE Questions from the FOUR questions provided
4/4-way servo solenoid directional control valves, directly operated, with electrical position feedback and on-board electronics (OBE)
4/4-way servo solenoid directional control valves, directly operated, with electrical position feedback and on-board electronics (OBE) Type 4WRPEH 6 Size (NG) 6 Unit series 2X Maximum working pressure
Flow Control Valve. 1 Descriptions. 2 Symbols. Series SRCB.. 1.1 Generals. 1.2 Application examples. 2.2 3-way flow control. 2.1 2-way flow control
Flow Control Valve Series SRCB.. plug-in solenoid for easy coil change flow rates are unaffected by temperature change or when the higher load pressure alternates between the outlet ports energy - optimised
Rotating DC Motors Part II
Rotting Motors rt II II.1 Motor Equivlent Circuit The next step in our consiertion of motors is to evelop n equivlent circuit which cn be use to better unerstn motor opertion. The rmtures in rel motors
Unit 24: Applications of Pneumatics and Hydraulics
Unit 24: Applications of Pneumatics and Hydraulics Unit code: J/601/1496 QCF level: 4 Credit value: 15 OUTCOME 2 TUTORIAL 4 DIRECTIONAL CONTROL VALVES The material needed for outcome 2 is very extensive
2-way flow control valve Type 2FRM 6
RE /0.0 Replaces:.0 -way flow control valve Type FRM Nominal size Series X Maximum operating pressure bar ) Maximum flow L/min ) When used in conjunction with a rectifier plate up to 0 bar H//D /97 + H//D
Open center control block in monoblock design MO-40
Open center control block in monoblock design MO-40 RE 64370 Edition: 02.2015 Replaces: 02.1985 Size 40 Series 1X Maximum working pressure on pump side 350 bar on consumer side 420 bar Maximum flow 680
SITEX Teeth Coupling SITEX SITEX
SIEX eet oupling SIEX SIEX www.sitsp.com SIEX teet couplings escription SIEX couplings consist of two toote us wic re connecte wit one internlly toote sleeve. e us re me of steel n te teet, wic re ot profile
4/2-Way Pneumatic Solenoid Valve
4/2-Way Pneumatic Solenoid Valve Robust servo assisted piston valve Service friendly manual override Single or block assembly Explosion-proof versions Type 5413 cam be combined with Type 2508 Cable plug
PM10 VARIABLE DISPLACEMENT PUMP CLOSED LOOP CIRCUIT
PM10 VRIBLE DISPLCEMENT PUMP CLOSED LOOP CIRCUIT T E C H N I C L C T L O G PM10 - Variable displacement pump POCLIN HYDRULICS OVERVIEW PM10 is a variable displacement, axial piston pump, with swashplate
2. VOLTAGE TRANSFORMERS Support type Support type with fuse Touch-proof type
2. VOLTGE TRSFORMERS Support type Support type with fuse Touch-proof type 16 Instrument trnsformers Medium voltge indoor 2. VOLTGE TRSFORMERS ITRODUCTIO Voltge trnsformers reduce the voltge in the medium
PPS-PPQ-BT-PIAS RESIN INSULATORS FOR OIL INSULATED ELECTRICAL MACHINES
PPS-PPQ-BT-PIAS RESIN INSULATORS FOR OIL INSULATED ELECTRICAL MACHINES BUSHING WITH PLUG CONNECTION WITH OUTER CONE PPS CHARACTERISTICS The PPS bushing can be used as a fixed section for the entry of medium
size 3 15 4200 size 4 19 6600
BE/BE ISO 99/ Valves - Compliance with ISO 99/ international standards - Full range: - - - size - Two different internal commutation system: mixed and spool, appreciated for decades thanks to their maximum
Engineer-to-Engineer Note
Engineer-to-Engineer Note EE-265 Technicl notes on using Anlog Devices DSPs, processors nd development tools Contct our technicl support t dsp.support@nlog.com nd t dsptools.support@nlog.com Or visit our
, and the number of electrons is -19. e e 1.60 10 C. The negatively charged electrons move in the direction opposite to the conventional current flow.
Prolem 1. f current of 80.0 ma exists in metl wire, how mny electrons flow pst given cross section of the wire in 10.0 min? Sketch the directions of the current nd the electrons motion. Solution: The chrge
3/2- and 2/2-way cartridge valve type BVE
3/2- and 2/2-way cartridge valve type BVE for any flow direction, zero leakage, all ports pressure resistant Flow Q max = 70 lpm Perm. pressure p max = 400 bar Additional valves with same function: ' Type
UM/22000 5/2 or 5/3 Solenoid and air pilot actuated soft spool valves
U/ / or / > > Sub-base mounted, 99- s,, or > > Steel reinforced main seals > > Low power coils (,W) > > Wide range of sub-bases and accessories > > 6 bar and bar NOO solenoid pilots with locking or non-locking
Chapter 5: Flow Valves
Catalogue HY11-300/UK Contents Chapter : Flow Valves Series Description Size Mounting Page Parker Standard DIN / ISO 1/4 3/8 1/2 3/4 1 06 10 16 Throttle valves, manual adjustment MVI -2 NS -4 FS With free
DEMU REBAR COUPLERS DEMU-COUP 13.1-E CONCRETE
EMU REBAR COUPERS EMU-COUP 13.1-E CONCRETE .0 Fixing to timer formwork Niling ing pltes for S-Socket rs: Ø ds 12-20 mm: Plstic Fixing with nils 4.0 5.0 Ød 25-32mm dss Assemly instructions Instlltion of
Cartridge Program - Oil Control
Cartridge Program - Oil Control The Drive & Control Company INDEX General Information Mechanical Data Solenoid Data Pressure Control Valve Special Valves Check Valves Counterbalance Valves Flow Control
8060 Series Alternate Action and Momentary Pushbutton Switches
Features/Benefits Long travel vailable with LED Long life contact design Epoxy terminal seal compatabile with bottom wash cleaning RoHS compliant models available Typical pplications Instrumentation Computers
3 Port Solenoid Valve
Port Solenoid Valve Series V00 Rubber Seal Power consumption 0. W (with power saving circuit) VV0 VV00 V00 -V F VS temperature rises: C (with power saving circuit) Sonic conductance Series Standard Large
Single sub-base valve
solenoid valves Mini-valves 10 mm Electrical connection... Mounting... Port sizes... Rated temperature... Fluid... Working pressure... Nominal flow... Pneumatic connections Voltage... Power... NC poppet
3 Port Solenoid Valve
ubber Seal ort Solenoid Valve Series SYJ00/00/700 [Option] SYJ VQZ V VG Improved pilot valve ilot valve cover is stronger using stainless steel. Mounting thread is also reinforced from size M1.7 to M.
97300 NAMUR series, 3/2 & 5/2 Indirect solenoid actuated spool valve
9700 NAMUR series, / & / > > Port size: G/, / NPT, NAMUR Interface > > Crossover-free switching > > Main application: Single and double acting actuators > > / way valve usable as / way valve > > Manual
Compact power modules
Compact power modules Replaces: 07.12 1/22 DL series Summary Description Page Ordering details 2 echnical data 4 A.C. Electric motors 9 Central manifolds 11 Flow restrictor 16 Coils and connector 16 Gear
type V46, solenoid or pneumatic operated
SPECIFICATION general type of construction spool valve operator solenoid or pneumatic operated or by manual override. Manual override is equipped with a monostable function (push) and a bistable function
Pressure Relief. Pressure Relief and Sequence Valves CG2V-6/8, 10 Series; CG5V-6/8, 20 Series. Vickers. Features and Benefits.
Vickers Pressure Relief Pressure Relief and Sequence Valves CG2V-6/8, 1 Series; CG5V-6/8, 2 Series Typical Section CG2V-6*W-1 relief valve Basic Characteristics Maximum pressure.......... 35 bar (5 psi)
CS99S Laboratory 2 Preparation Copyright W. J. Dally 2001 October 1, 2001
CS99S Lortory 2 Preprtion Copyright W. J. Dlly 2 Octoer, 2 Ojectives:. Understnd the principle of sttic CMOS gte circuits 2. Build simple logic gtes from MOS trnsistors 3. Evlute these gtes to oserve logic
D660 Series Servo-Proportional Control Valves with Integrated Electronics ISO 4401 Size 05 to 10
D660 Series Servo-Proportional Control Valves with Integrated Electronics ISO 4401 Size 05 to 10 OVERVIEW D660 Section Page MOOG SERVO-PROPORTIONAL CONTROL VALVES Overview 2 3 Technical Data 4 5 Electronics
APPLICATION NOTE Revision 3.0 MTD/PS-0534 August 13, 2008 KODAK IMAGE SENDORS COLOR CORRECTION FOR IMAGE SENSORS
APPLICATION NOTE Revision 3.0 MTD/PS-0534 August 13, 2008 KODAK IMAGE SENDORS COLOR CORRECTION FOR IMAGE SENSORS TABLE OF FIGURES Figure 1: Spectrl Response of CMOS Imge Sensor...3 Figure 2: Byer CFA Ptterns...4
DIRECTIONAL CONTROL VALVES
Series 35 High Flow High Pressure Directional Valves D05SD DIN Type D05S Electrical Box Type D03SD DIN Type D03S Electrical Box Type D03SL Lead Wire Type (D05SL Lead Wire Type Also available) FEATURES
VARIABLE DISPLACEMENT AXIAL PISTON PUMPS. For truck applications
VARIABLE DISPLACEMENT AXIAL PISTON PUMPS For truck applications TVP FEATURES Variable displacement axial piston pumps swash plate design ideally suited for open circuit truck applications. The compact
the machine and check the components
Quick Setup Guide Strt Here HL-2270DW Before using this mchine for the first time, red this Quick Setup Guide to setup nd instll your mchine. To view the Quick Setup Guide in other lnguges, plese visit
Small Business Networking
Why network is n essentil productivity tool for ny smll business Effective technology is essentil for smll businesses looking to increse the productivity of their people nd business. Introducing technology
Cable Plug acc. to DIN EN 175301-803, Form A
Cable Plug acc. to DIN EN 175301-803, Form A Complete program Contact form 18 mm Also available with LED indicator Optional 4-pin version for pressure switch or impulse valves respectively Versions with
Section 5-4 Trigonometric Functions
5- Trigonometric Functions Section 5- Trigonometric Functions Definition of the Trigonometric Functions Clcultor Evlution of Trigonometric Functions Definition of the Trigonometric Functions Alternte Form
Simulation of operation modes of isochronous cyclotron by a new interative method
NUKLEONIKA 27;52(1):29 34 ORIGINAL PAPER Simultion of opertion modes of isochronous cyclotron y new intertive method Ryszrd Trszkiewicz, Mrek Tlch, Jcek Sulikowski, Henryk Doruch, Tdeusz Norys, Artur Srok,
Size 20 Contacts Solder and Crimp Removable. Military Quality and Severe Industrial Environmental Applications. Environmental-D Series
Environmental-D MILITRY QULITY, REMOVLE CONTCT, SUMINITURE-D CONNECTORS FOR MILITRY ND SEVERE INDUSTRIL ENVIRONMENTL PPLICTIONS Size 20 Contacts Solder and Crimp Removable Military Quality and Severe Industrial
2.7 2.7. Szelepszigetek
2.7 Seite 133 pge oldl 133 2.7 Szelepszigetek Vlve erminls Generl ÁltlánosInformtion információkonszelepszigetekhez Vlve erminls 2.7.1 Seite pge oldl 134 Szelepszigetek Vlve terminl for 24V vlves DC és
IMPORTANT INFORMATION
SERVICE MNUL NUMBER 28 Tble of Contents IMPORTNT INFORMTION Section 1B - Mintennce MINTENNCE 1 B Torque Specifictions................ 1B-2 Lubricnts / Selnts / dhesives..... 1B-2 pproved Hydrulic Steering
Check Valves. Pilot Operated Check Valves. Vickers. PCGV-6/8, 10 Series; PCG5V-6/8, 20 Series. Typical Section. Features and Benefits
Vickers Check Valves Pilot Operated Check Valves PCGV-6/8, 10 Series; PCG5V-6/8, 20 Series Typical Section Typical PCG5V model with internally drained pilot piston internal leakage through the closed pilot
License Manager Installation and Setup
The Network License (concurrent-user) version of e-dpp hs hrdwre key plugged to the computer running the License Mnger softwre. In the e-dpp terminology, this computer is clled the License Mnger Server.
Safety for Hydraulics Leak free check valve, pilot operated, series ERV Cartridge type, two stage
Safety for Hydraulics Leak free check valve, pilot operated, series Cartridge type, two stage prevents a load from falling if a burst occurs in feed pipe hardened seat and poppet prevents creep of hydraulically
INSTALLATION INSTRUCTIONS FOR ELECTRONIC SENSOR ACTIVATED HAND WASHING FAUCET
Code No. 0816702 Rev. 0b (11/08) INSTLLTION INSTRUCTIONS FOR ELECTRONIC SENSOR CTIVTED HND WSHING FUCET Compliant to: SME 112.18.1 and CS 125.1 ETF-800 Wall Mounted, Sensor ctivated Electronic Hand Washing
ORDERING DATA: SERIES 5360 PROXIMITY SWITCHES
ORDERING DT: SERIES 560 PROXIMITY ES TO ORDER SPECIFY: Type, Cord Type, Sensing Circuitry, Design No., and Cable Length. TYPE Hall, Reed, Magnetoresistive CBLE LENGTH 02-2 meter length cable (Leave blank
Graphs on Logarithmic and Semilogarithmic Paper
0CH_PHClter_TMSETE_ 3//00 :3 PM Pge Grphs on Logrithmic nd Semilogrithmic Pper OBJECTIVES When ou hve completed this chpter, ou should be ble to: Mke grphs on logrithmic nd semilogrithmic pper. Grph empiricl
Directional Control Valves
echnical Information General he D1VW Series directional control valves are highperformance, 4-chamber, direct operated, wet armature solenoid controlled, 3 or 4-way valves. hey are available in 2 or 3-position
ISO 3601-3 INTERNATIONAL STANDARD. Fluid power systems O-rings Part 3: Quality acceptance criteria
INTERNATIONAL STANDARD ISO 3601-3 Second edition 2005-11-01 Fluid power systems O-rings Prt 3: Qulity cceptnce criteri Trnsmissions hydruliques et pneumtiques Joints toriques Prtie 3: Critères de qulité
Directional seated valves type VP 1
Directional seated valves type VP 1 zero leakage, intended for general hydraulic applications and grease lubing systems Flow Q max Operation pressure p max = 15 lpm = 400 bar Individual valve Individual
Assisted lift operated 2/2-way solenoid valves Type EV250B
MAKING MODERN LIVING POSSIBLE Data sheet Assisted lift operated 2/2-way solenoid valves Type EV250B EV250B with assisted lift can operate from zero and up to 10 bar differential pressure. This 2/2-way