WEEKLY SCHEDULE. GROUPS (mark X) SPECIAL ROOM FOR SESSION (Computer class room, audio-visual class room)
|
|
- Scarlett Webb
- 8 years ago
- Views:
Transcription
1 SESSION WEEK COURSE: THERMAL ENGINEERING DEGREE: Aerospace Engineering YEAR: 2nd TERM: 2nd The course has 29 sessions distributed in 14 weeks. The laboratory sessions are included in these sessions. The students have 2 sessions per week, excepting in one week in which they have 3 sessions. WEEKLY SCHEDULE CONTENTS DESCRIPTION GROUPS (mark ) SPECIAL ROOM FOR SESSION (Computer class room, audio-visual class room) Indicate YES/ If the session needs 2 teachers WEEKLY SCHEDULE FOR STUDENT LECTURES SEMINARS DESCRIPTION IN CLASS HOURS HOME- WORK HOURS (Max. h week) Review of thermodynamics and closed system analysis. Definitions. First and Second Law of Thermodynamics for closed systems. Reading and study: First and Second Law of Thermodynamics applied to common closed Systems in Engineering. Solution of relevant examples Thermodynamic properties. 2 3 Evaluation of properties-i: usage of properties tables and diagrams. 3.- Control Volume analysis. Reading and study: First and Second Law of Thermodynamics applied to common control volumes in Página 1 de 6
2 Control Volume Analysis. First and Second Law of Thermodynamics applied to the analysis of stead state Systems. Engineering. Solution of relevant examples. 2 4 Thermodynamic properties (cont.). Evaluation of properties-ii: ideal substance models. Control Volume análisis (cont.) Description and analysis of control volume systems: nozzles, pumps, compressors, turbines, heat exchangers and valves. Control Volume análisis (const.). Thermodynamic process analysis. Isentropic efficiencies of turbines, compressors, pumps, nozzles and diffusers. 4.-Thermodynamic analysis of gas turbines. Brayton Cycle: description and main parameters Solution of relevant examples for control volume Systems using different substance models. Reading and study: Thermodynamic analysis of gas turbine cycles (Brayton) 4 8 Thermodynamic analysis of gas turbines (cont.). Solution of Brayton cycles 9.- Thermodynamic analysis of internal combustion engines. Otto-Diesel-Dual cycles: description and main parameters. Reading and study: Analysis of thermodynamic cycles for internal combustión engines. - Reading of the guideline and instructions documents 10 Laboratory session-1: Thermodynamic analysis of gas turbines using CyclePad Computer room Thermodynamic analysis of internal combustion engines (cont.) Solution of Otto, Diesel and Dual cycles. 6.- Introduction to propulsion. Main propulsion systems. Integral momentum equation. Thrust and specific impulse. Required energy. Propulsive efficiency. Reading and study: Classification of propulsion systems in aerospace engineering. Elements present in the Página 2 de 6
3 propulsion systems. Mass and momentum conservation analysis. Propulsion performance parameters Introduction to propulsion (cont.). Gas turbines for aircraft propulsion: turbojet, turbofan and turboprop. Constitutive elements and thermodynamic cycles. Example cases. - In-class cases analysis and problem solution - In-class evaluation activity 13 QUIZ-1 on Engineering Thermodynamics. Introduction to propulsion (cont.). Ramjet and rocket engines. Constitutive elements and thermodynamic analysis. Introduction to propulsion (cont.). Reading and study: Classification of propulsion systems in aerospace engineering. Elements present in the propulsion systems. Mass and momentum conservation analysis. Propulsion performance parameters. 14. Solution of example cases of propulsion cycles..- Introduction to Heat Transfer Fundamental laws. Thermal properties of matter. Differential equation of conduction. 8.- One-dimensional steady state heat transfer. One-dimensional conduction. Steady state conduction between flat surfaces. Steady state one-dimensional conduction in cylindrical and spherical geometries. Thermal resistances. Application of thermal resistances to one-dimensional conduction. One-dimensional steady state heat transfer (cont.). Practical application of the modes of heat transfer and thermal resistances to different systems 9 1 One-dimensional steady state heat transfer (cont.). Reading and study: description and comparative analysis of the modes of heat transfer Reading and study. Deduction of the differential equation of conduction. Application of the differential equation of conduction to one-dimensional problems. Understanting of the concept of thermal resistances in thermal circuits. Reading and study: Analysis of insulation layers and understanding of the concept of critical insulation radius. Deduction and interpretation of the temperature solution with uniform heat generation. Insulation. Conduction with heat sources. Flat plate with heat generation. Cylinder with generation. Solution of example cases. Página 3 de 6
4 Extended surfaces. fins. Thermal analysis of fins. Reading and study: formulation and simplification of the fin differential equation. Fins of uniform section Extended surfaces (cont.). Reading and study: performance parameters of fins. Annular fins. Finned surfaces. Performance parameters of fins. - Reading of the guideline and instructions documents Laboratory session-2: Thermal analysis of two-dimensional fins using ANSYS Fluent. Computer room Transient conduction of heat. Lumped capacity method. One-dimensional transient conduction Reading and study: deduction of the general equation of the lumped capacity method for transient problems. Analysis of different transient condution problems. Reading and study: major parameters describing the transfer of heat by convection in both external configurations Convection heat transfer. Dimensionless parameters. External flow convection. Internal flow convection. Analytical and empirical relationships Reading and study: major parameters describing the transfer of heat by convection in internal flow configurations Convection heat transfer (cont.). Solution of convection heat transfer cases. Página 4 de 6
5 - Reading of the guideline and instructions documents Laboratory session-3: External forced convection over a flat plate: numerical experiments using ANSYS Fluent Heat Exchangers. Types of heat exchangers and definitions. NTU-epsilon method. Reading and understanding of the thermal behaviour of heat exchangers and their different configurations Heat Exchangers (cont.) Analysis and design of heat exchangers. QUIZ-2 on Conductive and Convective Heat Transfer Radiation heat transfer. Fundamentals. Black body and gray surfaces. Thermal resistance of radiation. Radiation heat transfer (cont.). Problems solution using thermal resistances. Application to relevant examples in aerospace engineering. - In-class evaluation activity Reading and study: description and deduction of the principal parameters describing the transfer of heat by radiation. Reading and study: Simplifying assumptions and methodologies aimed to solve thermal engineering problems. - Reading of the guideline and instructions documents Laboratory session-4: Thermo-hydrodynamic analysis of duct flows using ANSYS Fluent. Subtotal Total 1 (Hours of class plus student homework hours between weeks 1-14) 133 Página de 6
6 1 Tutorials, handing in, etc 16 1 Assessment 3 18 Subtotal Total 2 (Hours of class plus student homework hours between weeks 1-18) 1 TOTAL (Total 1 + Total 2. Maximum 180 hours) 10 Página 6 de 6
HEAT TRANSFER IM0245 3 LECTURE HOURS PER WEEK THERMODYNAMICS - IM0237 2014_1
COURSE CODE INTENSITY PRE-REQUISITE CO-REQUISITE CREDITS ACTUALIZATION DATE HEAT TRANSFER IM05 LECTURE HOURS PER WEEK 8 HOURS CLASSROOM ON 6 WEEKS, HOURS LABORATORY, HOURS OF INDEPENDENT WORK THERMODYNAMICS
More informationJet Propulsion. Lecture-2. Ujjwal K Saha, Ph.D. Department of Mechanical Engineering Indian Institute of Technology Guwahati 1
Lecture-2 Prepared under QIP-CD Cell Project Jet Propulsion Ujjwal K Saha, Ph.D. Department of Mechanical Engineering Indian Institute of Technology Guwahati 1 Simple Gas Turbine Cycle A gas turbine that
More informationFundamentals of THERMAL-FLUID SCIENCES
Fundamentals of THERMAL-FLUID SCIENCES THIRD EDITION YUNUS A. CENGEL ROBERT H. TURNER Department of Mechanical JOHN M. CIMBALA Me Graw Hill Higher Education Boston Burr Ridge, IL Dubuque, IA Madison, Wl
More informationFluid Mechanics Prof. S. K. Som Department of Mechanical Engineering Indian Institute of Technology, Kharagpur
Fluid Mechanics Prof. S. K. Som Department of Mechanical Engineering Indian Institute of Technology, Kharagpur Lecture - 20 Conservation Equations in Fluid Flow Part VIII Good morning. I welcome you all
More informationDEGREE: POLITICAL SCIENCE YEAR: 2º TERM: 2º WEEKLY PLANNING
SESSION WEEK COURSE: ADMINISTRATIVE LAW DEGREE: POLITICAL SCIENCE YEAR: 2º TERM: 2º WEEKLY PLANNING DESCRIPTION GROUPS (mark ) Special room for session (computer classroom, audio-visual classroom ) WEEKLY
More informationINTRODUCTION TO FLUID MECHANICS
INTRODUCTION TO FLUID MECHANICS SIXTH EDITION ROBERT W. FOX Purdue University ALAN T. MCDONALD Purdue University PHILIP J. PRITCHARD Manhattan College JOHN WILEY & SONS, INC. CONTENTS CHAPTER 1 INTRODUCTION
More informationIntegration of a fin experiment into the undergraduate heat transfer laboratory
Integration of a fin experiment into the undergraduate heat transfer laboratory H. I. Abu-Mulaweh Mechanical Engineering Department, Purdue University at Fort Wayne, Fort Wayne, IN 46805, USA E-mail: mulaweh@engr.ipfw.edu
More informationME6130 An introduction to CFD 1-1
ME6130 An introduction to CFD 1-1 What is CFD? Computational fluid dynamics (CFD) is the science of predicting fluid flow, heat and mass transfer, chemical reactions, and related phenomena by solving numerically
More informationSteady Heat Conduction
Steady Heat Conduction In thermodynamics, we considered the amount of heat transfer as a system undergoes a process from one equilibrium state to another. hermodynamics gives no indication of how long
More informationModule 1 : Conduction. Lecture 5 : 1D conduction example problems. 2D conduction
Module 1 : Conduction Lecture 5 : 1D conduction example problems. 2D conduction Objectives In this class: An example of optimization for insulation thickness is solved. The 1D conduction is considered
More informationFinite Element Modules for Enhancing Undergraduate Transport Courses: Application to Fuel Cell Fundamentals
Finite Element Modules for Enhancing Undergraduate Transport Courses: Application to Fuel Cell Fundamentals Originally published in 2007 American Society for Engineering Education Conference Proceedings
More informationHYBRID ROCKET TECHNOLOGY IN THE FRAME OF THE ITALIAN HYPROB PROGRAM
8 th European Symposium on Aerothermodynamics for space vehicles HYBRID ROCKET TECHNOLOGY IN THE FRAME OF THE ITALIAN HYPROB PROGRAM M. Di Clemente, R. Votta, G. Ranuzzi, F. Ferrigno March 4, 2015 Outline
More informationMECHANICAL ENGINEERING DEPARTMENT
FACULTY OF ENGINEERING SHREE SARASWATI EDUCATION SANSTHAN S GROUP OF INSTITUTIONS AT PO, RAJPUR TA. KADI, DIST. MEHSANA MECHANICAL ENGINEERING DEPARTMENT SYLLABUS FOR MID SEM EXAMINATON EVEN SEM 2015 SUBJECT
More informationFUNDAMENTALS OF ENGINEERING THERMODYNAMICS
FUNDAMENTALS OF ENGINEERING THERMODYNAMICS System: Quantity of matter (constant mass) or region in space (constant volume) chosen for study. Closed system: Can exchange energy but not mass; mass is constant
More informationFundamentals of Fluid Mechanics
Sixth Edition. Fundamentals of Fluid Mechanics International Student Version BRUCE R. MUNSON DONALD F. YOUNG Department of Aerospace Engineering and Engineering Mechanics THEODORE H. OKIISHI Department
More informationExpress Introductory Training in ANSYS Fluent Lecture 1 Introduction to the CFD Methodology
Express Introductory Training in ANSYS Fluent Lecture 1 Introduction to the CFD Methodology Dimitrios Sofialidis Technical Manager, SimTec Ltd. Mechanical Engineer, PhD PRACE Autumn School 2013 - Industry
More informationCFD SIMULATION OF SDHW STORAGE TANK WITH AND WITHOUT HEATER
International Journal of Advancements in Research & Technology, Volume 1, Issue2, July-2012 1 CFD SIMULATION OF SDHW STORAGE TANK WITH AND WITHOUT HEATER ABSTRACT (1) Mr. Mainak Bhaumik M.E. (Thermal Engg.)
More informationAmpacity simulation of a high voltage cable to connecting off shore wind farms
Ampacity simulation of a high voltage cable to connecting off shore wind farms Eva Pelster 1, Dr. David Wenger 1 1 Wenger Engineering GmbH, Einsteinstr. 55, 89077 Ulm, mail@wenger-engineering.com Abstract:
More informationEngineering Problem Solving as Model Building
Engineering Problem Solving as Model Building Part 1. How professors think about problem solving. Part 2. Mech2 and Brain-Full Crisis Part 1 How experts think about problem solving When we solve a problem
More informationHigh Speed Aerodynamics Prof. K. P. Sinhamahapatra Department of Aerospace Engineering Indian Institute of Technology, Kharagpur
High Speed Aerodynamics Prof. K. P. Sinhamahapatra Department of Aerospace Engineering Indian Institute of Technology, Kharagpur Module No. # 01 Lecture No. # 06 One-dimensional Gas Dynamics (Contd.) We
More informationDistance Learning Program
Distance Learning Program Leading To Master of Engineering or Master of Science In Mechanical Engineering Typical Course Presentation Format Program Description Clarkson University currently offers a Distance
More informationHeat Transfer and Energy
What is Heat? Heat Transfer and Energy Heat is Energy in Transit. Recall the First law from Thermodynamics. U = Q - W What did we mean by all the terms? What is U? What is Q? What is W? What is Heat Transfer?
More informationFundamentals of Pulse Detonation Engine (PDE) and Related Propulsion Technology
Fundamentals of Pulse Detonation Engine (PDE) and Related Propulsion Technology Dora E. Musielak, Ph.D. Aerospace Engineering Consulting Arlington, TX All rights reserved. No part of this publication may
More informationDifferential Relations for Fluid Flow. Acceleration field of a fluid. The differential equation of mass conservation
Differential Relations for Fluid Flow In this approach, we apply our four basic conservation laws to an infinitesimally small control volume. The differential approach provides point by point details of
More informationCustomer Training Material. Lecture 2. Introduction to. Methodology ANSYS FLUENT. ANSYS, Inc. Proprietary 2010 ANSYS, Inc. All rights reserved.
Lecture 2 Introduction to CFD Methodology Introduction to ANSYS FLUENT L2-1 What is CFD? Computational Fluid Dynamics (CFD) is the science of predicting fluid flow, heat and mass transfer, chemical reactions,
More informationGraduate Certificate Program in Energy Conversion & Transport Offered by the Department of Mechanical and Aerospace Engineering
Graduate Certificate Program in Energy Conversion & Transport Offered by the Department of Mechanical and Aerospace Engineering Intended Audience: Main Campus Students Distance (online students) Both Purpose:
More informationHeat Transfer From A Heated Vertical Plate
Heat Transfer From A Heated Vertical Plate Mechanical and Environmental Engineering Laboratory Department of Mechanical and Aerospace Engineering University of California at San Diego La Jolla, California
More informationIntroduction to CFD Analysis
Introduction to CFD Analysis Introductory FLUENT Training 2006 ANSYS, Inc. All rights reserved. 2006 ANSYS, Inc. All rights reserved. 2-2 What is CFD? Computational fluid dynamics (CFD) is the science
More informationFLUID MECHANICS IM0235 DIFFERENTIAL EQUATIONS - CB0235 2014_1
COURSE CODE INTENSITY PRE-REQUISITE CO-REQUISITE CREDITS ACTUALIZATION DATE FLUID MECHANICS IM0235 3 LECTURE HOURS PER WEEK 48 HOURS CLASSROOM ON 16 WEEKS, 32 HOURS LABORATORY, 112 HOURS OF INDEPENDENT
More informationThe Second Law of Thermodynamics
The Second aw of Thermodynamics The second law of thermodynamics asserts that processes occur in a certain direction and that the energy has quality as well as quantity. The first law places no restriction
More informationGraduate Courses in Mechanical Engineering
Graduate Courses in Mechanical Engineering MEEG 501 ADVANCED MECHANICAL ENGINEERING ANALYSIS An advanced, unified approach to the solution of mechanical engineering problems, with emphasis on the formulation
More informationFigure 1 - Unsteady-State Heat Conduction in a One-dimensional Slab
The Numerical Method of Lines for Partial Differential Equations by Michael B. Cutlip, University of Connecticut and Mordechai Shacham, Ben-Gurion University of the Negev The method of lines is a general
More informationForces on the Rocket. Rocket Dynamics. Equation of Motion: F = Ma
Rocket Dynamics orces on the Rockets - Drag Rocket Stability Rocket Equation Specific Impulse Rocket otors Thrust orces on the Rocket Equation of otion: = a orces at through the Center of ass Center of
More informationCO 2 41.2 MPa (abs) 20 C
comp_02 A CO 2 cartridge is used to propel a small rocket cart. Compressed CO 2, stored at a pressure of 41.2 MPa (abs) and a temperature of 20 C, is expanded through a smoothly contoured converging nozzle
More informationDiesel Cycle Analysis
Engineering Software P.O. Box 1180, Germantown, MD 20875 Phone: (301) 540-3605 FAX: (301) 540-3605 E-Mail: info@engineering-4e.com Web Site: http://www.engineering-4e.com Diesel Cycle Analysis Diesel Cycle
More informationCFD Analysis of Supersonic Exhaust Diffuser System for Higher Altitude Simulation
Page1 CFD Analysis of Supersonic Exhaust Diffuser System for Higher Altitude Simulation ABSTRACT Alan Vincent E V P G Scholar, Nehru Institute of Engineering and Technology, Coimbatore Tamil Nadu A high
More informationPost graduate program for engineering leading to M.Tech in renewable energy systems with specialization in solar energy
Post graduate program for engineering leading to M.Tech in renewable energy systems with specialization in solar energy 1.0 Introduction India s growing energy needs mixed with world s order for reducing
More informationScience Standard Articulated by Grade Level Strand 5: Physical Science
Concept 1: Properties of Objects and Materials Classify objects and materials by their observable properties. Kindergarten Grade 1 Grade 2 Grade 3 Grade 4 PO 1. Identify the following observable properties
More informationAPPLIED THERMODYNAMICS. TUTORIAL No.3 GAS TURBINE POWER CYCLES. Revise gas expansions in turbines. Study the Joule cycle with friction.
APPLIED HERMODYNAMICS UORIAL No. GAS URBINE POWER CYCLES In this tutorial you will do the following. Revise gas expansions in turbines. Revise the Joule cycle. Study the Joule cycle with friction. Extend
More informationجامعة البلقاء التطبيقية
AlBalqa Applied University تا سست عام 997 The curriculum of associate degree in Air Conditioning, Refrigeration and Heating Systems consists of (7 credit hours) as follows: Serial No. Requirements First
More informationTWO-DIMENSIONAL FINITE ELEMENT ANALYSIS OF FORCED CONVECTION FLOW AND HEAT TRANSFER IN A LAMINAR CHANNEL FLOW
TWO-DIMENSIONAL FINITE ELEMENT ANALYSIS OF FORCED CONVECTION FLOW AND HEAT TRANSFER IN A LAMINAR CHANNEL FLOW Rajesh Khatri 1, 1 M.Tech Scholar, Department of Mechanical Engineering, S.A.T.I., vidisha
More informationEXPERIMENTAL AND CFD ANALYSIS OF A SOLAR BASED COOKING UNIT
EXPERIMENTAL AND CFD ANALYSIS OF A SOLAR BASED COOKING UNIT I N T R O D U C T I O N Among the different energy end uses, energy for cooking is one of the basic and dominant end uses in developing countries.
More informationLecture 3 Fluid Dynamics and Balance Equa6ons for Reac6ng Flows
Lecture 3 Fluid Dynamics and Balance Equa6ons for Reac6ng Flows 3.- 1 Basics: equations of continuum mechanics - balance equations for mass and momentum - balance equations for the energy and the chemical
More informationIntroduction to CFD Analysis
Introduction to CFD Analysis 2-1 What is CFD? Computational Fluid Dynamics (CFD) is the science of predicting fluid flow, heat and mass transfer, chemical reactions, and related phenomena by solving numerically
More informationDynamic Process Modeling. Process Dynamics and Control
Dynamic Process Modeling Process Dynamics and Control 1 Description of process dynamics Classes of models What do we need for control? Modeling for control Mechanical Systems Modeling Electrical circuits
More informationFREESTUDY HEAT TRANSFER TUTORIAL 3 ADVANCED STUDIES
FREESTUDY HEAT TRANSFER TUTORIAL ADVANCED STUDIES This is the third tutorial in the series on heat transfer and covers some of the advanced theory of convection. The tutorials are designed to bring the
More informationSolar Ast ro p h y s ics
Peter V. Foukal Solar Ast ro p h y s ics Second, Revised Edition WI LEY- VCH WILEY-VCH Verlag Co. KCaA Contents Preface 1 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 2 2.1 2.1.1 2.1.2 2.2 2.2.1 2.2.2 2.2.3 2.3
More informationSTANDARD EXTRUDED HEAT SINKS
STANDARD EXTRUDED HEAT SINKS ABHA101 Weight: 0.4oz (11.34g) ABHA102 Weight: 0.5oz (14.17g) STANDARD EXTRUDED HEAT SINKS ABHA103 Weight: 0.2oz (5.57g) For use with DIPs and SRAMs ABHA104 Weight: 0.1oz (2.83g)
More informationThe temperature of a body, in general, varies with time as well
cen2935_ch4.qxd 11/3/5 3: PM Page 217 TRANSIENT HEAT CONDUCTION CHAPTER 4 The temperature of a body, in general, varies with time as well as position. In rectangular coordinates, this variation is expressed
More informationTextbook: Introduction to Fluid Mechanics by Philip J. Pritchard. John Wiley & Sons, 8th Edition, ISBN-13 9780470547557, -10 0470547553
Semester: Spring 2016 Course: MEC 393, Advanced Fluid Mechanics Instructor: Professor Juldeh Sesay, 226 Heavy Engineering Bldg., (631)632-8493 Email: Juldeh.sessay@stonybrook.edu Office hours: Mondays
More informationThe content is based on the National Science Teachers Association (NSTA) standards and is aligned with state standards.
Literacy Advantage Physical Science Physical Science Literacy Advantage offers a tightly focused curriculum designed to address fundamental concepts such as the nature and structure of matter, the characteristics
More informationInternational Master of Science Degree Program
International Master of Science Degree Program Sustainable Energy Systems Courses in English http://www.sirius.luth.se/energy/ International Master of Science Degree Program taught in English at Luleå
More informationHeat Transfer Prof. Dr. Aloke Kumar Ghosal Department of Chemical Engineering Indian Institute of Technology, Guwahati
Heat Transfer Prof. Dr. Aloke Kumar Ghosal Department of Chemical Engineering Indian Institute of Technology, Guwahati Module No. # 02 One Dimensional Steady State Heat Transfer Lecture No. # 05 Extended
More informationTwo-Dimensional Conduction: Shape Factors and Dimensionless Conduction Heat Rates
Two-Dimensional Conduction: Shape Factors and Dimensionless Conduction Heat Rates Chapter 4 Sections 4.1 and 4.3 make use of commercial FEA program to look at this. D Conduction- General Considerations
More informationLecture 6 - Boundary Conditions. Applied Computational Fluid Dynamics
Lecture 6 - Boundary Conditions Applied Computational Fluid Dynamics Instructor: André Bakker http://www.bakker.org André Bakker (2002-2006) Fluent Inc. (2002) 1 Outline Overview. Inlet and outlet boundaries.
More informationMEL 807 Computational Heat Transfer (2-0-4) Dr. Prabal Talukdar Assistant Professor Department of Mechanical Engineering IIT Delhi
MEL 807 Computational Heat Transfer (2-0-4) Dr. Prabal Talukdar Assistant Professor Department of Mechanical Engineering IIT Delhi Time and Venue Course Coordinator: Dr. Prabal Talukdar Room No: III, 357
More information1150 hp motor design, electromagnetic and thermal analysis
115 hp motor design, electromagnetic and thermal analysis Qasim Al Akayshee 1, and David A Staton 2 1 Mawdsley s Ltd., The Perry Centre, Davey Close, Waterwells, Gloucester GL2 4AD phone: +44 1452 888311
More informationHEAT AND MASS TRANSFER
MEL242 HEAT AND MASS TRANSFER Prabal Talukdar Associate Professor Department of Mechanical Engineering g IIT Delhi prabal@mech.iitd.ac.in MECH/IITD Course Coordinator: Dr. Prabal Talukdar Room No: III,
More informationCFD STUDY OF TEMPERATURE AND SMOKE DISTRIBUTION IN A RAILWAY TUNNEL WITH NATURAL VENTILATION SYSTEM
CFD STUDY OF TEMPERATURE AND SMOKE DISTRIBUTION IN A RAILWAY TUNNEL WITH NATURAL VENTILATION SYSTEM J. Schabacker, M. Bettelini, Ch. Rudin HBI Haerter AG Thunstrasse 9, P.O. Box, 3000 Bern, Switzerland
More informationBuilding Energy Systems. - HVAC: Heating, Distribution -
* Some of the images used in these slides are taken from the internet for instructional purposes only Building Energy Systems - HVAC: Heating, Distribution - Bryan Eisenhower Associate Director Center
More informationComputational Fluid Dynamics in Automotive Applications
Computational Fluid Dynamics in Automotive Applications Hrvoje Jasak h.jasak@wikki.co.uk Wikki Ltd, United Kingdom FSB, University of Zagreb, Croatia 1/15 Outline Objective Review the adoption of Computational
More informationDifferential Balance Equations (DBE)
Differential Balance Equations (DBE) Differential Balance Equations Differential balances, although more complex to solve, can yield a tremendous wealth of information about ChE processes. General balance
More informationHeat Transfer Prof. Dr. Ale Kumar Ghosal Department of Chemical Engineering Indian Institute of Technology, Guwahati
Heat Transfer Prof. Dr. Ale Kumar Ghosal Department of Chemical Engineering Indian Institute of Technology, Guwahati Module No. # 04 Convective Heat Transfer Lecture No. # 03 Heat Transfer Correlation
More informationAn insight into some innovative cycles for aircraft propulsion
731 An insight into some innovative cycles for aircraft propulsion G Corchero 1, J L Montañés 1, D Pascovici 2, and S Ogaji 2 1 Universidad Politécnica de Madrid (UPM), E. T. S. Ingenieros Aeronáuticos,
More informationINLET AND EXAUST NOZZLES Chap. 10 AIAA AIRCRAFT ENGINE DESIGN R01-07/11/2011
MASTER OF SCIENCE IN AEROSPACE ENGINEERING PROPULSION AND COMBUSTION INLET AND EXAUST NOZZLES Chap. 10 AIAA AIRCRAFT ENGINE DESIGN R01-07/11/2011 LECTURE NOTES AVAILABLE ON https://www.ingegneriaindustriale.unisalento.it/scheda_docente/-/people/antonio.ficarella/materiale
More informationAn experimental investigation of heat transfer of free convection on triangular fins in order to optimize the arrangement of fins
International Journal of Science, Technology and Society 2014; 2(5: 152-160 Published online September 30, 2014 (http://www.sciencepublishinggroup.com/j/ijsts doi: 10.11648/j.ijsts.20140205.18 ISSN: 2330-7412
More informationFree Convection Film Flows and Heat Transfer
Deyi Shang Free Convection Film Flows and Heat Transfer With 109 Figures and 69 Tables < J Springer Contents 1 Introduction 1 1.1 Scope 1 1.2 Application Backgrounds 1 1.3 Previous Developments 2 1.3.1
More informationCATALOG CHANGES - F13. The Department of Ocean and Mechanical Engineering offers programs of study leading to the following degrees:
CATALOG CHANGES - F13 Ocean and Mechanical Engineering Department: The following changes are necessary to update the catalog. The first change is to include the combined BSME to MS degree program in the
More informationDEGREE: Bachelor's Degree in Audiovisual System Engineering CURSO: 4º CUATRIMESTRE: 2º WEEKLY PLANNING
SESON WEEK COURSE: Mobile Applications DEGREE: Bachelor's Degree in Audiovisual System Engineering CURSO: 4º CUATRIMESTRE: 2º WEEKLY PLANNING DESCRIPTION GROUPS (mark ) SPECIAL ROOM FOR SESON (Computer
More informationChapter 5 MASS, BERNOULLI AND ENERGY EQUATIONS
Fluid Mechanics: Fundamentals and Applications, 2nd Edition Yunus A. Cengel, John M. Cimbala McGraw-Hill, 2010 Chapter 5 MASS, BERNOULLI AND ENERGY EQUATIONS Lecture slides by Hasan Hacışevki Copyright
More informationMeasuring Optical and Thermal Properties of High Temperature Receivers
www.dlr.de Folie 1 Measuring Optical and Thermal Properties of High Temperature Receivers Johannes Pernpeintner, Thomas Fend 4 th SFERA Summerschool, May 15-16, 2013, Burg Hornberg www.dlr.de Folie 2 Part
More informationCalculating Heat Loss by Mark Crombie, Chromalox
Calculating Heat Loss by Mark Crombie, Chromalox Posted: January 30, 2006 This article deals with the basic principles of heat transfer and the calculations used for pipes and vessels. By understanding
More informationStirling heat engine Internal combustion engine (Otto cycle) Diesel engine Steam engine (Rankine cycle) Kitchen Refrigerator
Lecture. Real eat Engines and refrigerators (Ch. ) Stirling heat engine Internal combustion engine (Otto cycle) Diesel engine Steam engine (Rankine cycle) Kitchen Refrigerator Carnot Cycle - is not very
More informationThe Aircraft Engine Design Project Fundamentals of Engine Cycles
GE Aviation The Aircraft Engine Design Project Fundamentals of Engine Cycles Spring 2009 Ken Gould Phil Weed 1 GE Aviation Technical History I-A - First U.S. jet engine (Developed in Lynn, MA, 1941) U.S.
More informationCFD Application on Food Industry; Energy Saving on the Bread Oven
Middle-East Journal of Scientific Research 13 (8): 1095-1100, 2013 ISSN 1990-9233 IDOSI Publications, 2013 DOI: 10.5829/idosi.mejsr.2013.13.8.548 CFD Application on Food Industry; Energy Saving on the
More informationTHE UNIVERSITY OF TEXAS AT AUSTIN Department of Aerospace Engineering and Engineering Mechanics. EM 311M - DYNAMICS Spring 2012 SYLLABUS
THE UNIVERSITY OF TEXAS AT AUSTIN Department of Aerospace Engineering and Engineering Mechanics EM 311M - DYNAMICS Spring 2012 SYLLABUS UNIQUE NUMBERS: 13815, 13820, 13825, 13830 INSTRUCTOR: TIME: Dr.
More informationTHE CFD SIMULATION OF THE FLOW AROUND THE AIRCRAFT USING OPENFOAM AND ANSA
THE CFD SIMULATION OF THE FLOW AROUND THE AIRCRAFT USING OPENFOAM AND ANSA Adam Kosík Evektor s.r.o., Czech Republic KEYWORDS CFD simulation, mesh generation, OpenFOAM, ANSA ABSTRACT In this paper we describe
More informationAPPLIED THERMODYNAMICS TUTORIAL 1 REVISION OF ISENTROPIC EFFICIENCY ADVANCED STEAM CYCLES
APPLIED THERMODYNAMICS TUTORIAL 1 REVISION OF ISENTROPIC EFFICIENCY ADVANCED STEAM CYCLES INTRODUCTION This tutorial is designed for students wishing to extend their knowledge of thermodynamics to a more
More informationO.F.Wind Wind Site Assessment Simulation in complex terrain based on OpenFOAM. Darmstadt, 27.06.2012
O.F.Wind Wind Site Assessment Simulation in complex terrain based on OpenFOAM Darmstadt, 27.06.2012 Michael Ehlen IB Fischer CFD+engineering GmbH Lipowskystr. 12 81373 München Tel. 089/74118743 Fax 089/74118749
More informationGasoline engines. Diesel engines. Hybrid fuel cell vehicles. Model Predictive Control in automotive systems R. Scattolini, A.
Model Predictive Control in automotive systems R. Scattolini, A. Miotti Dipartimento di Elettronica e Informazione Outline Gasoline engines Diesel engines Hybrid fuel cell vehicles Gasoline engines 3 System
More informationFundamentals Of. Heat Transfer. Theory and Applications. (Class Notes for ME 371) Michael C. Wendl
Fundamentals Of Heat Transfer Theory and Applications (Class Notes for ME 371) Michael C. Wendl Department of Mechanical Engineering and School of Medicine Washington University Saint Louis, U.S.A. (25)
More informationSTATE UNIVERSITY OF NEW YORK COLLEGE OF TECHNOLOGY CANTON, NEW YORK COURSE OUTLINE. ACHP 104 Refrigeration & Air Conditioning Service II
STATE UNIVERSITY OF NEW YORK COLLEGE OF TECHNOLOGY CANTON, NEW YORK COURSE OUTLINE ACHP 104 Refrigeration & Air Conditioning Service II Prepared By: Stan Skowronek CANINO SCHOOL OF ENGINEERING TECHNOLOGY
More informationME 315 - Heat Transfer Laboratory. Experiment No. 7 ANALYSIS OF ENHANCED CONCENTRIC TUBE AND SHELL AND TUBE HEAT EXCHANGERS
ME 315 - Heat Transfer Laboratory Nomenclature Experiment No. 7 ANALYSIS OF ENHANCED CONCENTRIC TUBE AND SHELL AND TUBE HEAT EXCHANGERS A heat exchange area, m 2 C max maximum specific heat rate, J/(s
More informationWednesday 16 January 2013 Afternoon
Wednesday 16 January 2013 Afternoon A2 GCE PHYSICS B (ADVANCING PHYSICS) G494/01 Rise and Fall of the Clockwork Universe *G411660113* Candidates answer on the Question Paper. OCR supplied materials: Data,
More informationCondensing Boiler Efficiency
Condensing Boiler Efficiency Date: July 17, 2012 PRES E NT ED BY DO N L E O NA RDI LE O N A RD I I NC. HV AC T RAI N I N G & C ON SU LT IN G Concepts 1 The current state of evolution in boiler design 2
More informationCFD Beyond the Whitespace. Datacentres Central & Eastern Europe
CFD Beyond the Whitespace Datacentres Central & Eastern Europe September 2013 CONTENTS 1.0 Introduction 2.0 What is CFD? How it Works CFD in Data Centres 3.0 CFD Outside the White Space Case Study 4.0
More informationMAXIMISING THE HEAT TRANSFER THROUGH FINS USING CFD AS A TOOL
MAXIMISING THE HEAT TRANSFER THROUGH FINS USING CFD AS A TOOL Sanjay Kumar Sharma 1 and Vikas Sharma 2 1,2 Assistant Professor, Department of Mechanical Engineering, Gyan Vihar University, Jaipur, Rajasthan,
More informationDEGREE: Bachelor in Biomedical Engineering YEAR: 2 TERM: 2 WEEKLY PLANNING
SESSION WEEK COURSE: Electronic Technology in Biomedicine DEGREE: Bachelor in Biomedical Engineering YEAR: 2 TERM: 2 WEEKLY PLANNING DESCRIPTION GROUPS (mark X) SPECIAL ROOM FOR SESSION (Computer class
More informationAN EXPERIMENTAL STUDY OF EXERGY IN A CORRUGATED PLATE HEAT EXCHANGER
International Journal of Mechanical Engineering and Technology (IJMET) Volume 6, Issue 11, Nov 2015, pp. 16-22, Article ID: IJMET_06_11_002 Available online at http://www.iaeme.com/ijmet/issues.asp?jtype=ijmet&vtype=6&itype=11
More information6 J - vector electric current density (A/m2 )
Determination of Antenna Radiation Fields Using Potential Functions Sources of Antenna Radiation Fields 6 J - vector electric current density (A/m2 ) M - vector magnetic current density (V/m 2 ) Some problems
More informationDepartment of Aeronautics and Astronautics School of Engineering Massachusetts Institute of Technology. Graduate Program (S.M., Ph.D., Sc.D.
Department of Aeronautics and Astronautics School of Engineering Massachusetts Institute of Technology Graduate Program (S.M., Ph.D., Sc.D.) Field: Air-Breathing Propulsion Date: September 4, 2007 Introduction
More informationCALEFFI. Compact automatic flow rate regulator with polymer cartridge. 127 series 01166/09 GB
Compact automatic flow rate regulator with polymer cartridge 127 series REGISTERED BS EN ISO 9001:2000 Cert. n FM 21654 UNI EN ISO 9001:2000 Cert. n 0003 CALEFFI 01166/09 GB Function The AUTOFLOW devices
More informationTHERMODYNAMICS: COURSE INTRODUCTION
UNIFIED ENGINEERING 2000 Lecture Outlines Ian A. Waitz THERMODYNAMICS: COURSE INTRODUCTION Course Learning Objectives: To be able to use the First Law of Thermodynamics to estimate the potential for thermomechanical
More informationIV. Rocket Propulsion Systems. A. Overview
IV. Rocket Propulsion Systems A. Overview by J. M. Seitzman for AE 4451 Jet and Rocket Propulsion Seitzman Rocket Overview-1 Rocket Definition Rocket Device that provides thrust to a vehicle by accelerating
More informationCONCEPTUALIZATION OF UTILIZING WATER SOURCE HEAT PUMPS WITH COOL STORAGE ROOFS
CONCEPTUALIZATION OF UTILIZING WATER SOURCE HEAT PUMPS WITH COOL STORAGE ROOFS by Dr. Bing Chen and Prof. John Bonsell Passive Solar Research Group University of Nebraska-Lincoln Omaha campus and Richard
More informationMaster of Education in Middle School Science
Master of Education in Middle School Science This program is designed for middle school teachers who are seeking a second license in General Science or who wish to obtain greater knowledge of science education.
More informationCOMPREHENSIVE INSTRUCTIONAL PROGRAM REVIEW. Physics and Astronomy Moreno Valley College. Submitted by: Dipen Bhattacharya, PhD Associate Professor
COMPREHENSIVE INSTRUCTIONAL PROGRAM REVIEW Physics and Astronomy Moreno Valley College Submitted by: Dipen Bhattacharya, PhD Associate Professor Round Three 2012-2016 Office of Educational Services 1 Comprehensive
More informationEnergy and Buildings
Energy and Buildings 59 (2013) 62 72 Contents lists available at SciVerse ScienceDirect Energy and Buildings j our na l ho me p age: www.elsevier.com/locate/enbuild Experimental thermal characterization
More informationTangential Impulse Detonation Engine
Tangential Impulse Detonation Engine Ionut Porumbel, Ph.D. Aerodays 2015 21.10.2015, London, UK Overview Ongoing FP 7 project breakthrough propulsion system technology a step change in air transportation;
More informationTYPE-CERTIFICATE DATA SHEET
TYPE-CERTIFICATE DATA SHEET EASA TC E.036 for Trent 1000 series engines Certificate Holder Rolls-Royce plc PO Box 31 Derby DE24 8BJ United Kingdom For Models: Trent 1000-A Trent 1000-A2 Trent 1000-AE Trent
More information