STANDARD EXTRUDED HEAT SINKS
|
|
|
- Clemence Russell
- 9 years ago
- Views:
Transcription
1 STANDARD EXTRUDED HEAT SINKS ABHA101 Weight: 0.4oz (11.34g) ABHA102 Weight: 0.5oz (14.17g)
2 STANDARD EXTRUDED HEAT SINKS ABHA103 Weight: 0.2oz (5.57g) For use with DIPs and SRAMs ABHA104 Weight: 0.1oz (2.83g)
3 STANDARD EXTRUDED HEAT SINKS ABHA105 Weight: 0.7oz (19.84g) ABHA106 Thermal resistance of 44 C/W in natural convection at 75 C temperature rise. Weight: 0.3oz (8.5g)
4 STANDARD PIN FIN HEAT SINKS ABHA201 Weight: 0.oz (17.00g) ABHA202 Weight: 0.2oz (5.67g)
5 STANDARD PIN FIN HEAT SINKS ABHA203 Weight: 0.2oz (5.67g) ABHA204 Weight: 0.2oz (5.67g)
6 STANDARD PIN FIN HEAT SINKS ABHA205 Weight: 0.4oz (11.34g) ABHA206 Weight: 0.8oz (22.68g)
7 STANDARD PIN FIN HEAT SINKS ABHA207 Weight: 0.3oz (8.50g) ABHA208 Thermal resistance of 30.8 C/W in natural convection at 75 C temperature rise. Weight: 0.5oz (14.17g)
8 STANDARD PIN FIN HEAT SINKS ABHA209 Weight: 0.8oz (22.68g) ABHA210 Thermal resistance of 22.5 C/W in natural convection at 75 C temperature rise. Weight: 0.6oz (17.00g)
9 STANDARD BOARD LEVEL HEAT SINKS ABHA301 Weight: 0.2oz (5.68g) ABHA302 Weight: 0.3oz (8.5g)
10 STANDARD BOARD LEVEL HEAT SINKS ABHA303 Weight: 0.2oz (5.67g) ABHA304 Weight: 0.6oz (17.00g)
11 STANDARD BOARD LEVEL HEAT SINKS ABHA305 Weight: 0.8oz (22.68g) ABHA306 Weight: 1.3oz (36.85g)
12 STANDARD HEAT SINK STAMPINGS USED WITH TO-220 PACKAGE ABHA401 Thermal resistance in natural convection of 22.5 C/W at 75 C temperature rise. Weight: 0.1oz (2.83g) USED WITH T0-218, T0-220 PACKAGE ABHA402 Thermal resistance in natural convection of 24 C/W at 75 C temperature rise. Weight: 0.1oz (2.83g)
13 STANDARD HEAT SINK STAMPINGS USED WITH TO-220 PACKAGE ABHA403 Thermal resistance in natural convection of 18 C/W at 75 C temperature rise. Weight: 0.3oz (8.50g)
Everline Module Application Note: Round LED Module Thermal Management
Everline Module Application Note: Round LED Module Thermal Management PURPOSE: Use of proper thermal management is a critical element of Light Emitting Diode (LED) system design. The LED temperature directly
The Effect of Forced Air Cooling on Heat Sink Thermal Ratings
zpero 1 The Effect of Forced Air Cooling on Heat Sink Thermal Ratings By Paul Bachman, Fellow Engineer & Ronnie Haiduk, Applications Engineer, Crydom, Inc. ABSTRACT A heat sink s ability to dissipate thermal
Thermal Analysis, Heat Sink Design and Performance Verification for GE Fanuc Intelligent Platform s WANic 3860 Packet Processor PCI Card
CASE STUDY Thermal Analysis, Heat Sink Design and Performance Verification for GE Fanuc Intelligent Platform s WANic 3860 Packet Processor PCI Card Challenge When GE Fanuc Intelligent Platforms, a leading
EXTRUDED HEAT SINKS FOR POWER SEMICONDUCTORS
WTS001_p26-49 6/14/07 10:56 AM Page 45 EXTRUDED HEAT SINS FOR POWER S 621/623 SERIES Low-Profile for All Metal-Case Power Semiconductors TO-3 Footprint Thermal Performance at Typical Load Standard Dimensions
APPROVAL SHEET. Chip Coolers. Spire Corp.
APPROVAL SHEET Chip Coolers SALES MODEL NO: SP532S7 ENGINEER NO: SC532S3-093-AM3W2- Article No. : SP-AP-SC-A2 Issue Date : Sep 7, 2009 Version : A/0 Audited by Checked by Drafted by Denny Spire Corp. Tel.:
CCI HEAT PIPE DESIGN GUIDE
CCI HEAT PIPE DESIGN GUIDE Rev: D01 Prepared by:cci RD01 Heat Pipe Team Date:27. June. 2006 *Contents Feature descriptions & Geometry limitation Test methodology descriptions Screen Mesh Groove Sintering
DMX-K-DRV. Integrated Step Motor Driver + (Basic Controller) Manual
DMX-K-DRV Integrated Step Motor Driver + (Basic Controller) Manual DMX-K-DRV Manual page 1 rev 1.33 COPYRIGHT 2007 ARCUS, ALL RIGHTS RESERVED First edition, June 2007 ARCUS TECHNOLOGY copyrights this document.
L293B L293E PUSH-PULL FOUR CHANNEL DRIVERS. OUTPUT CURRENT 1A PER CHANNEL PEAK OUTPUT CURRENT 2A PER CHANNEL (non repetitive) INHIBIT FACILITY
L293B L293E PUSH-PULL FOUR CHANNEL DRIVERS OUTPUT CURRENT 1A PER CHANNEL PEAK OUTPUT CURRENT 2A PER CHANNEL (non repetitive) INHIBIT FACILITY. HIGH NOISE IMMUNITY SEPARATE LOGIC SUPPLY OVERTEMPERATURE
Vapor Chambers. Figure 1: Example of vapor chamber. Benefits of Using Vapor Chambers
Vapor Chambers A vapor chamber is a high-end thermal management device that can evenly dissipate heat from a small source to a large platform of area (see Figure 1). It has a similar construction and mechanism
LM380 Audio Power Amplifier
LM380 Audio Power Amplifier General Description The LM380 is a power audio amplifier for consumer application. In order to hold system cost to a minimum, gain is internally fixed at 34 db. A unique input
Comparing naturally cooled horizontal baseplate heat sinks with vertical baseplate heat sinks
Comparing naturally cooled horizontal baseplate heat sinks with vertical baseplate heat sinks Keywords: heat sink heatsink fin array natural convection natural cooling free convection horizontal baseplate
Finishes... 110 Card Ejectors & Guides... 111 Thermal Greases and Epoxies... 112 115
Table of Contents General Information How to Use This Standard Part Catalog... Index by Part Number... 3 Index by Device and Thermal Resistance... 5 Index by Style and Thermal Resistance... How to Select
LM35 Precision Centigrade Temperature Sensors
Precision Centigrade Temperature Sensors General Description Typical Applications The LM35 series are precision integrated-circuit temperature sensors, whose output voltage is linearly proportional to
Module 1 : Conduction. Lecture 5 : 1D conduction example problems. 2D conduction
Module 1 : Conduction Lecture 5 : 1D conduction example problems. 2D conduction Objectives In this class: An example of optimization for insulation thickness is solved. The 1D conduction is considered
DW8501 High Power LED Driver
Descriptions The is an instant On/Off LED driver for high power LED applications. At output stage, one regulated current port is designed to provide a uniform and constant current sink for driving LEDs
Application Note AN-1057
Application Note AN-1057 Heatsink Characteristics Table of Contents Page Introduction...1 Maximization of Thermal Management...1 Heat Transfer Basics...1 Terms and Definitions...2 Modes of Heat Transfer...2
Features: High reliability. Very sharp reverse characteristic. Zener voltage 3.3V to 12V. V z -tolerance ±5%.
Features: High reliability. Very sharp reverse characteristic. Zener voltage 3.3V to 12V. V z -tolerance ±5%. Applications: Voltage stabilization. Absolute Maximum Ratings Parameter Test Conditions Symbol
PowerAmp Design. PowerAmp Design PAD135 COMPACT HIGH VOLATGE OP AMP
PowerAmp Design COMPACT HIGH VOLTAGE OP AMP Rev G KEY FEATURES LOW COST SMALL SIZE 40mm SQUARE HIGH VOLTAGE 200 VOLTS HIGH OUTPUT CURRENT 10A PEAK 40 WATT DISSIPATION CAPABILITY 200V/µS SLEW RATE APPLICATIONS
S101D01/S101D02 S201D01/S201D02
S1D1/S1D/S1D1/S1D S1D1/S1D S1D1/S1D 1-Pin DIP Type SSR for Low Power Control Features 1. Compact ( 1-pin dual-in-line package type). RMS ON-state current I T : 1.Arms 3. Built-in zero-cross (S1D, S1D ).
Advanced Monolithic Systems
Advanced Monolithic Systems FEATURES Three Terminal Adjustable or Fixed oltages* 1.5, 1.8, 2.5, 2.85, 3.3 and 5. Output Current of 1A Operates Down to 1 Dropout Line Regulation:.2% Max. Load Regulation:.4%
Surface Mount Technology cooling for high volumes applications by: Cesare Capriz Aavid Thermalloy via XXV Aprile 32 Cadriano (BO) ITALY
Surface Mount Technology cooling for high volumes applications by: Cesare Capriz Aavid Thermalloy via XXV Aprile 32 Cadriano (BO) ITALY Abstract: The automotive technology is fast moving in integrating
Welcome to the World of Aavid Heat Pipes
Welcome to the World of Aavid Heat Pipes As a pioneer in heat pipe technology and their application, Aavid Thermalloy has developed a high quality manufacturing process to ensure long life and reliability
Welcome to this presentation on LED System Design, part of OSRAM Opto Semiconductors LED 101 series.
Welcome to this presentation on LED System Design, part of OSRAM Opto Semiconductors LED 101 series. 1 To discuss the design challenges of LED systems we look at the individual system components. A basic
Il Peso del Thermal Management nei LED
Il Peso del Thermal Management nei LED Heat Pipe: high performance thermal solution Ing. Manca Claudio F.lli POLI S.r.l. Padova 10-12 Ottobre 2013 Titolo Intervento 1/N Heat pipes in the history The Heat
WEEKLY SCHEDULE. GROUPS (mark X) SPECIAL ROOM FOR SESSION (Computer class room, audio-visual class room)
SESSION WEEK COURSE: THERMAL ENGINEERING DEGREE: Aerospace Engineering YEAR: 2nd TERM: 2nd The course has 29 sessions distributed in 14 weeks. The laboratory sessions are included in these sessions. The
Intel Atom Processor E3800 Product Family
Intel Atom Processor E3800 Product Family Thermal Design Guide October 2013 Document Number: 329645-001 Legal Lines and Disclaimers INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH INTEL PRODUCTS.
Small Form Factor SFF. Complete housing solutions
Small Form Factor SFF Complete housing solutions Chassis for Slot computer 19 enclosures ATR, nano ATR, custom Small Form Factor Different box approaches Box PCs PC 104 24.05.2012 2 19 enclosures 6U boards
Application Note AN-0994 Maximizing the Effectiveness of your SMD Assemblies
Application Note AN-0994 Maximizing the Effectiveness of your SMD Assemblies Table of Contents Page Method...2 Thermal characteristics of SMDs...2 Adhesives...4 Solder pastes...4 Reflow profiles...4 Rework...6
Shrinking a power supply and the challenge to maintain high reliability.
Application Note - AN1201 Shrinking a power supply and the challenge to maintain high reliability. Shane Callanan, Director of Applications Engineering, Excelsys Technologies considers the challenges associated
5W HI-POWER LED SPECIFICATION
5W HI-POWER LED SPECIFICATION HPG8b-495xWHCx Drawn by Checked by Approved by RoHS Conformity DATE:2013/4/9 REV:A HUEY JANN High Power 5W LED is made of GaInN chips with precise package technique which
EN 1279-5. Insulating glass units, intended to be used in buildings and construction works
4 (#2) - 12-4, Thermally Toughened Heat and Solar Control Glass 1 (C) 3-12 - 4-12 - 4 29 (-1; -4) db U-value (EN 673) 1,6 W / (m 2 K) Light transmission and reflection 0,71/0,10/0,11 Solar energy characteristics
1A L.D.O VOLTAGE REGULATOR
FEATURES Output Current up to 1 A Low Dropout Voltage (1.2V at 1A Output current) Three Terminal Adjustable(ADJ) or Fixed 1.2V, 1.5V, 1.8V, 2.5V, 2.85V, 5.0V Line Regulation typically at 0.1% max. Load
LM78XX Series Voltage Regulators
LM78XX Series Voltage Regulators General Description Connection Diagrams The LM78XX series of three terminal regulators is available with several fixed output voltages making them useful in a wide range
Moving Magnet Actuator MI FFA series
Moving Magnet Actuator MI FFA series The moving magnet MI-FFA series actuators are a line of actuators designed to be a true alternative for pneumatic cylinders. The actuators incorporate an ISO 6432 interface
LIGHTING. URL: www.crestpak.com. Go Green Go Smart. Product Features: Notes. Applications
Product Features: high bay/flood light 1. Energy Saving. 2. Ceiling suspended space lighting for warehouse style buildings, factories, production halls, can now be replaced by high power technology. 3.
Ampacity simulation of a high voltage cable to connecting off shore wind farms
Ampacity simulation of a high voltage cable to connecting off shore wind farms Eva Pelster 1, Dr. David Wenger 1 1 Wenger Engineering GmbH, Einsteinstr. 55, 89077 Ulm, [email protected] Abstract:
TYPICAL APPLICATION CIRCUIT. ORDER INFORMATION SOP-EP 8 pin A703EFT (Lead Free) A703EGT (Green)
www.addmtek.com 2 CHANNELS 150mA HIGH VOLTAGE ADJUSTABLE CURRENT REGULATOR DESCRIPTION A703 is a high voltage, adjustable constant current driver for LED applications. Two regulated current ports are designed
PDS5100H. Product Summary. Features and Benefits. Mechanical Data. Description and Applications. Ordering Information (Note 5) Marking Information
Green 5A HIGH VOLTAGE SCHOTTKY BARRIER RECTIFIER POWERDI 5 Product Summary I F V R V F MAX (V) I R MAX (ma) (V) (A) @ +25 C @ +25 C 1 5..71.35 Description and Applications This Schottky Barrier Rectifier
1.5A Ultra Low Dropout Linear Regulator TJ3965
FEATURES Ultra Low Dropout Voltage Low Ground Pin Current Excellent Line and Load Regulation Guaranteed Output Current of 1.5A Available in MSOP8, SOP8, SOP8PP, SOT223, TO252, TO263, TO220, and SOT89 Packages
LED HEATSINKS Spotlight / Tracklight HighBay / LowBay Reflector ring & Housing Customized Heatsinks
LED HEATSINKS Spotlight / Tracklight HighBay / LowBay Reflector ring & Housing Customized Heatsinks THE EKL AG For 20 years now EKL AG, located at Leutkirch in the Allgau, has designed and manufactured
TS555. Low-power single CMOS timer. Description. Features. The TS555 is a single CMOS timer with very low consumption:
Low-power single CMOS timer Description Datasheet - production data The TS555 is a single CMOS timer with very low consumption: Features SO8 (plastic micropackage) Pin connections (top view) (I cc(typ)
Hot-End Replacement Guide. BFB 3000 plus & 3D Touch
Hot-End Replacement Guide BFB 3000 plus & 3D Touch Pre assembly checks: Testing the hot-end before fitting: Check the heating cable: Set the multi-meter to read resistance (2000 ohms) Test the two outside
MC78XX/LM78XX. 3-terminal 1A positive voltage regulator. Features. Description. Internal Block Digram. www.fairchildsemi.com
www.fairchildsemi.com 3-terminal 1A positive voltage regulator Features Current up to 1A Voltages of 5, 6, 8, 9, 10, 11, 12, 15, 18, 24V Thermal Overload Protection Short Circuit Protection Transistor
Integration of a 400W ac dc power supply into a closed system relying only on natural convection cooling
Integration of a 400W ac dc power supply into a closed system relying only on natural convection cooling How potting an electronic assembly simplifies the thermal management in harsh working conditions
Current valve. for AC 24 V pulse/pause control of electrical loads up to 30 kw
4 937 DESIO Current valve for AC 24 V pulse/pause control of electrical loads up to 30 kw SEA45.1 Use The current valve is used for the control of electric heating elements in heating, ventilation and
HEAT TRANSFER IM0245 3 LECTURE HOURS PER WEEK THERMODYNAMICS - IM0237 2014_1
COURSE CODE INTENSITY PRE-REQUISITE CO-REQUISITE CREDITS ACTUALIZATION DATE HEAT TRANSFER IM05 LECTURE HOURS PER WEEK 8 HOURS CLASSROOM ON 6 WEEKS, HOURS LABORATORY, HOURS OF INDEPENDENT WORK THERMODYNAMICS
LM380 Audio Power Amplifier
LM380 Audio Power Amplifier General Description The LM380 is a power audio amplifier for consumer application In order to hold system cost to a minimum gain is internally fixed at 34 db A unique input
Intel Quark SoC X1000
Thermal and Mechanical Design Guide April 2014 Document Number: 330259-001 Legal Lines and Disclaimers INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH INTEL PRODUCTS. NO LICENSE, EXPRESS OR
Economic Viability Assessment of Active Building Envelope Systems
Economic Viability Assessment of Active Building Envelope Systems Flor Rivas Achille Messac Steven Van Dessel Corresponding Author Achille Messac, Ph.D. Distinguished Professor and Department Chair Mechanical
DSRQ - DSRSQ - DSRSQ-THERM
DSRQ - DSRSQ - DSRSQ-THERM Specification item: Variable geometry diffuser on 597x597 mm panel developed for rooms with high ceilings where a long throw and a high induction ratio are required. Made up
2. Room temperature: C. Kelvin. 2. Room temperature:
Temperature I. Temperature is the quantity that tells how hot or cold something is compared with a standard A. Temperature is directly proportional to the average kinetic energy of molecular translational
Natural Convection. Buoyancy force
Natural Convection In natural convection, the fluid motion occurs by natural means such as buoyancy. Since the fluid velocity associated with natural convection is relatively low, the heat transfer coefficient
Heat Pipe Cooling of Concentrating Photovoltaic (CPV) Systems
Heat Pipe Cooling of Concentrating Photovoltaic (CPV) Systems William G. Anderson 1, Sanjida Tamanna 2, David B. Sarraf 3, and Peter M. Dussinger 4 Advanced Cooling Technologies, Inc., Lancaster, PA, 17601
Mounting Instructions for SP4 Power Modules
Mounting Instructions for SP4 Power Modules Pierre-Laurent Doumergue R&D Engineer Microsemi Power Module Products 26 rue de Campilleau 33 520 Bruges, France Introduction: This application note gives the
Equivalent Circuit. Operating Characteristics at Ta = 25 C, V CC = ±34V, R L = 8Ω, VG = 40dB, Rg = 600Ω, R L : non-inductive load STK4181V
Ordering number: 2137B Thick Film Hybrid IC STK4181V AF Power Amplifier (Split Power Supply) (45W + 45W min, THD = 0.08%) Features Pin-compatible with the STK4102II series. The STK4101V series use the
CS8481. 3.3 V/250 ma, 5.0 V/100 ma Micropower Low Dropout Regulator with ENABLE
3.3 /250 ma, 5.0 /100 ma Micropower Low Dropout Regulator with The CS8481 is a precision, dual Micropower linear voltage regulator. The switched 3.3 primary output ( OUT1 ) supplies up to 250 ma while
Serving the Heat Transfer Industry Since 1964
Serving the Heat Transfer Industry Since 1964 Products & Services I. FINNED TUBE/PIPE II. HEATERS & COOLERS III. ACCESSORIES/OTHER Products & Services I. FINNED TUBE/PIPE Air-Cooled Fin Tubes L-Foot Embedded
TDA4605 CONTROL CIRCUIT FOR SWITCH MODE POWER SUPPLIES USING MOS TRANSISTORS
CONTROL CIRCUIT FOR SWITCH MODE POWER SUPPLIES USING MOS TRANSISTORS Fold-Back Characteristic provides Overload Protection for External Diodes Burst Operation under Short-Circuit and no Load Conditions
CS8182. Micropower 200 ma Low Dropout Tracking Regulator/Line Driver
Micropower 2 m Low Dropout Tracking Regulator/Line Driver The is a monolithic integrated low dropout tracking regulator designed to provides an adjustable buffered output voltage that closely tracks (±1
Thermal Adhesives Ther-O-Bond 1500
Products / Interface Materials / Adhesives Adhesives Bond 1500 Epoxy casting system for potting and encapsulation Bond 1600 Two part epoxy for bonding Bond 2000 Rapid cure acrylic adhesive bond High strength
Power Dissipation Considerations in High Precision Vishay Sfernice Thin Film Chips Resistors and Arrays (P, PRA etc.) (High Temperature Applications)
VISHAY SFERNICE Resistive Products Application Note ABSTRACT On our thin film chips resistors and arrays the main path for the heat, more than 90 %, is conduction through the body of the component, the
www.pdffactory.com The T-lam System
The T-lam System T-lam..Where It All Begins.. T-preg The Heart of the T-lam System Three Main Functions Conducts Heat Insulate Electrically Adhesive Bonding Layer The T-lam System T-Preg Thermally Conductive
8755 W. Higgins Road Suite 500 Chicago, Illinois USA 60631. June 11, 2015. To whom it may concern:
8755 W. Higgins Road Suite 500 Chicago, Illinois USA 60631 June 11, 2015 To whom it may concern: This is to notify you that Littelfuse has accomplished a lead frame design enhancement for Thyristor TO218
CLA Series: Silicon Limiter Diode Bondable Chips
DATA SHEET CLA Series: Silicon Limiter Diode Bondable Chips Applications LNA receiver protection Commercial and defense radar Features Established Skyworks limiter diode process High-power, mid-range,
Power Rating Simulation of the new QNS connector generation
Power Rating Simulation of the new QNS connector generation IMS Connector Systems is an international, technology driven company specialized in development and production of high frequency connections.
Effective Cooling Method for Spin Casting Process
Effective Cooling Method for Spin Casting Process Yong-Ak Song, Sehyung Park, Yongsin Kwon Korea Institute of Science and Technology KIST, CAD/CAM Research Center P.O. Box 131, Cheongryang, Seoul, Korea
Series AMLDL-Z Up to 1000mA LED Driver
FEATURES: Click on Series name for product info on aimtec.com Series Up to ma LED Driver Models Single output Model Input Voltage (V) Step Down DC/DC LED driver Operating Temperature range 4ºC to 85ºC
unit : mm With heat sink (see Pd Ta characteristics)
Ordering number: EN1321E Monolithic Linear IC LA4261 3.5 W 2-Channel AF Power Amplifier for Home Stereos and Music Centers Features. Minimum number of external parts required (No input capacitor, bootstrap
CHAPTER 6 THERMAL DESIGN CONSIDERATIONS. page. Introduction 6-2. Thermal resistance 6-2. Junction temperature 6-2. Factors affecting R th(j-a) 6-2
CHAPTER 6 THERMAL DESIGN CONSIDERATIONS page Introduction 6-2 Thermal resistance 6-2 Junction temperature 6-2 Factors affecting 6-2 Thermal resistance test methods 6-3 Test procedure 6-3 Forced air factors
Heat Pipe Selection Revision 12/04/2001
Heat Pipe Selection Revision 12/04/2001 Heat pipes are being used very often in particular applications when conventional cooling methods are not suitable. Once the need for heat pipe arises, the most
PCB Assembly Guidelines for Intersil Wafer Level Chip Scale Package Devices
Assembly Guidelines for Intersil Wafer Level Chip Scale Package Devices Introduction There is an industry-wide trend towards using the smallest package possible for a given pin count. This is driven primarily
EFFECT OF OBSTRUCTION NEAR FAN INLET ON FAN HEAT SINK PERFORMANCE
EFFECT OF OBSTRUCTION NEAR FAN INLET ON FAN HEAT SINK PERFORMANCE Vivek Khaire, Dr. Avijit Goswami Applied Thermal Technologies India 3rd Floor,C-Wing,Kapil Towers, Dr. Ambedkar Road, Pune- 411 1 Maharashtra,
MC33079. Low noise quad operational amplifier. Features. Description
Low noise quad operational amplifier Datasheet production data Features Low voltage noise: 4.5 nv/ Hz High gain bandwidth product: 15 MHz High slew rate: 7 V/µs Low distortion: 0.002% Large output voltage
Preview of Period 5: Thermal Energy, the Microscopic Picture
Preview of Period 5: Thermal Energy, the Microscopic Picture 5.1 Temperature and Molecular Motion What is evaporative cooling? 5.2 Temperature and Phase Changes How much energy is required for a phase
AP1506. 150KHz, 3A PWM BUCK DC/DC CONVERTER. Pin Assignments. Description. Features. Applications. ( Top View ) 5 SD 4 FB 3 Gnd 2 Output 1 V IN
Description Pin Assignments The series are monolithic IC designed for a stepdown DC/DC converter, and own the ability of driving a 3A load without external transistor. Due to reducing the number of external
Iterative calculation of the heat transfer coefficient
Iterative calculation of the heat transfer coefficient D.Roncati Progettazione Ottica Roncati, via Panfilio, 17 44121 Ferrara Aim The plate temperature of a cooling heat sink is an important parameter
13.5-40.5GHz Frequency Multiplier. GaAs Monolithic Microwave IC. Output power (dbm) -10 -15 -20 -25 -30
Output power (dbm) GaAs Monolithic Microwave IC Description The is a packaged monolithic time three multiplier which integrates input and output buffer. This circuit is a very versatile multiplier for
CA723, CA723C. Voltage Regulators Adjustable from 2V to 37V at Output Currents Up to 150mA without External Pass Transistors. Features.
CA73, CA73C Data Sheet April 1999 File Number 788. Voltage Regulators Adjustable from V to 37V at Output Currents Up to 1mA without External Pass Transistors The CA73 and CA73C are silicon monolithic integrated
Pelleting Process. Pelleting Process
Evolution of fish feeds: Pelleting Process Moist feeds; beef liver, spleen 1960 Powder mixture Semi moist feeds; trash fish and powder 1970 Dry pelleted feeds with lots of fines 1980 Extruded feeds 1990
An experimental investigation of heat transfer of free convection on triangular fins in order to optimize the arrangement of fins
International Journal of Science, Technology and Society 2014; 2(5: 152-160 Published online September 30, 2014 (http://www.sciencepublishinggroup.com/j/ijsts doi: 10.11648/j.ijsts.20140205.18 ISSN: 2330-7412
Understanding Heat Transfer Mechanisms in Recessed LED Luminaires
Understanding Heat Transfer Mechanisms in Recessed LED Luminaires Tianming Dong and Nadarajah Narendran Lighting Research Center Rensselaer Polytechnic Institute, Troy, NY 12180 www.lrc.rpi.edu Dong, T.,
VIO-VELOCITY OPERATING MANUAL
VIO-VELOCITY OPERATING MANUAL Rev 5/00 Elmo Motion Control VIO-Velocity - Operating Manual Rev 09/09. Elmo Motion Control TABLE OF CONTENTS Safety Information...1 Introduction...3 Servo Amplifier Description...5
AP331A XX G - 7. Lead Free G : Green. Packaging (Note 2)
Features General Description Wide supply Voltage range: 2.0V to 36V Single or dual supplies: ±1.0V to ±18V Very low supply current drain (0.4mA) independent of supply voltage Low input biasing current:
Thermal Resistance, Power Dissipation and Current Rating for Ceramic and Porcelain Multilayer Capacitors
Thermal Resistance, Power Dissipation and Current Rating for Ceramic and Porcelain Multilayer Capacitors by F. M. Schaubauer and R. Blumkin American Technical Ceramics Reprinted from RF Design Magazine,
Assembly of LPCC Packages AN-0001
Assembly of LPCC Packages AN-0001 Surface Mount Assembly and Handling of ANADIGICS LPCC Packages 1.0 Overview ANADIGICS power amplifiers are typically packaged in a Leadless Plastic Chip Carrier (LPCC)
Saving energy by solar collector and heat pump combination in hot water production in residential and hotel sectors
Saving energy by solar collector and heat pump combination in hot water production in residential and hotel sectors Dr. Nguyen Nguyen An, HUST CONTENTS Energy consumption to produce hot water in residential
Dynamic Thermal Management for Distributed Systems
Dynamic Thermal Management for Distributed Systems Andreas Weissel Frank Bellosa Department of Computer Science 4 (Operating Systems) University of Erlangen-Nuremberg Martensstr. 1, 91058 Erlangen, Germany
Datasheet of the Easy Servo Drive ES-D808. 24-75VDC, 8.2A Peak, Close-loop, No Tuning. Version 0.1.0. http://www.leadshine.com
Datasheet of the Easy Servo Drive ES-D808 4-75VDC, 8.A Peak, Close-loop, No Tuning Version 0.1.0 http://www.leadshine.com Features Step and direction control Closed position loop for no loss of movement
Using NTC Temperature Sensors Integrated into Power Modules
Using NTC Temperature Sensors Integrated into Power Modules Pierre-Laurent Doumergue R&D Engineer Advanced Power Technology Europe Chemin de Magret 33700 Mérignac, France Introduction Most APTE (Advanced
(English version) CNPS9500 AT
(English version) CNPS9500 AT http://www.zalman.co.kr http://www.zalmanusa.com 1. Features 1) Compatible with Intel s Dual Core Pentium, Pentium 4, and Celeron D for Socket 775. 2) Low-noise 92mm PWM Control
Thermal Management Solutions for Printed Circuit Boards used in Digital and RF Power Electronics and LED assemblies
Thermal Management Solutions for Printed Circuit Boards used in Digital and RF Power Electronics and LED assemblies Sandy Kumar, Ph.D. Director of Technology American Standard Circuits, Inc 3615 Wolf Road
Essay 5 Tutorial for a Three-Dimensional Heat Conduction Problem Using ANSYS Workbench
Essay 5 Tutorial for a Three-Dimensional Heat Conduction Problem Using ANSYS Workbench 5.1 Introduction The problem selected to illustrate the use of ANSYS software for a three-dimensional steadystate
MM74C150 MM82C19 16-Line to 1-Line Multiplexer 3-STATE 16-Line to 1-Line Multiplexer
MM74C150 MM82C19 16-Line to 1-Line Multiplexer 3-STATE 16-Line to 1-Line Multiplexer General Description The MM74C150 and MM82C19 multiplex 16 digital lines to 1 output. A 4-bit address code determines
unit:mm 3049A-SIP12H 8.4 7.0
Ordering number:enn1277e Monolithic Linear IC LA4445 5.5W 2-Channel AF Power Amplifier Features Dual channels. Output : 5.5W 2 (typ.) Minimun number of external parts required. Small pop noise at the time
Current Limiting Power Resistors for High-Power LED Module Lighting Applications
Current Limiting Power Resistors for High-Power LED Module Lighting Applications PWR263 An ongoing trend toward miniaturization of virtually all electronics is accompanied by the demand for a reduction
HI-3182, HI-3183, HI-3184 HI-3185, HI-3186, HI-3188
March 2008 GENERAL DESCRIPTION HI-382, HI-383, HI-384 HI-385, HI-386, HI-388 ARINC 429 Differential Line Driver PIN CONFIGURATION (Top View) The HI-382, HI-383, HI-384, HI-385, HI-386 and HI-388 bus interface
Optimum fin spacing for fan-cooled heat sinks
Optimum fin spacing for fan-cooled heat sinks Keywords: optimum fin spacing fan-cooled heat sink heatsink optimal fin pitch parallel plate fin array optimization forced air cooling fan curve pressure drop