1N5518BUR-1 thru 1N5546BUR-1
|
|
|
- Primrose Barrett
- 7 years ago
- Views:
Transcription
1 Available on commercial versions Low Voltage Avalanche 500 mw Zener Diodes Qualified per MIL-PRF-19500/437 DESCRIPTION The 1N5518BUR-1 thru 1N5546BUR-1 series of watt glass surface mount Zener voltage regulators provides a selection from 3.3 to 33 volts with tolerances ranging from plus/minus 1% to %. The standard tolerance is plus/minus 5% with the B suffix unless ordered otherwise. These glass surface mount devices are available with an internal metallurgical bond option. This type of bonded Zener package construction is also in JAN, JANTX, and JANTXV military qualifications. Microsemi also offers numerous other Zener products to meet higher and lower power applications. Important: For the latest information, visit our website FEATURES JEDEC registered 1N5518 thru 1N5546. Voltage tolerances of plus/minus %, 10%, 5%, 2%, and 1% available. See Note 1 on page 3. Internal metallurgical bond. JAN, JANTX, and JANTXV qualification per MIL-PRF-19500/437 available. RoHS compliant versions available (commercial grade only). Qualified Levels: JAN, JANTX and JANTXV DO-213AA MELF Package Also available in: DO-35 (DO-4AH) (axial-leaded) 1N5518B-1 thru 1N5546B-1 APPLICATIONS / BENEFITS Regulates voltage over a broad operating current and temperature range. Extensive selection from 3.3 to 33 V. Hermetically sealed surface mount package. Nonsensitive to ESD per MIL-STD-750 Method 10. Minimal capacitance (see Figure 3). Inherently radiation hard as described in Microsemi s MicroNote 050 which is available at Microsemi.com. MAXIMUM RATINGS Parameters/Test Conditions Symbol Value Unit Junction and Storage Temperature T J and T STG -65 to +175 o C (Note 1) Steady-State Power P D W (Also see derating in Figure 2) Thermal Resistance Junction-to-End Cap (Note 2) R ӨJEC o C/W Thermal Resistance Junction-to-Ambient (Note 2) R ӨJA 0 o C/W Thermal Impedance Z ӨJX 35 o C/W Forward Voltage 0mA V F 1.1 V Solder Pad 10 s T SP 260 o C Notes: 1. At end cap temperature T EC < 125 o C or at ambient T A < 50 º C when mounted on FR4 PC board as described for thermal resistance above (see Figure 2 for derating). Derate to 0 at +175 o C. 2. When mounted on FR4 PC board (1 oz Cu) with recommended footprint (see last page). MSC Lawrence 6 Lake Street, Lawrence, MA (978) Fax: (978) MSC Ireland Gort Road Business Park, Ennis, Co. Clare, Ireland Tel: +353 (0) Fax: +353 (0) Website: T4-LDS-0037, Rev 2 (111456) 11 Microsemi Corporation Page 1 of 6
2 MECHANICAL and PACKAGING CASE: Hermetically sealed glass DO-213AA (SOD80 or MLL34) MELF style package. TERMINALS: End caps tin-lead plated or RoHS compliant matte-tin plating available (on commercial only) solderable per MIL- STD-750, method 26. POLARITY: Cathode indicated by band where diode is to be operated with the banded end positive with respect to the opposite end for Zener regulation. MOUNTING SURFACE SELECTION: The Axial Coefficient of Expansion (COE) of this device is approximately +6 PPM/ o C. The COE of the Mounting Surface System should be selected to provide a suitable match with this device. MARKING: cathode band only. TAPE & REEL option: Standard per EIA A with 12 mm tape (add TR suffix to part number). Consult factory for quantities. WEIGHT: 0.04 grams. See Package Dimensions on last page. PART NOMENCLATURE JAN 1N5518 B UR -1 (e3) Reliability Level JAN = JAN Level JANTX = JANTX Level JANTXV = JANTXV Level Blank = Commercial JEDEC type number See Electrical Characteristics table Zener Voltage Tolerance A = 10% B = 5% C = 2% D = 1% Blank = % RoHS Compliance e3 = RoHS compliant (available on commercial grady only) Blank = non-rohs compliant Metallurgical Bond -1 = Metallurgical bond Package type UR = surface mount Symbol I R I Z, I ZT, I ZK I ZL I ZM V Z V Z Z ZT or Z ZK SYMBOLS & DEFINITIONS Definition Reverse Current: The maximum reverse (leakage) current that will flow at the specified voltage and temperature. Regulator Current: The dc regulator current (I Z), at a specified test point (I ZT), near breakdown knee (I ZK). Low Regulator (Zener) Current: The lowest rated dc current for the specified power rating. Maximum Regulator (Zener) Current: The maximum rated dc current for the specified power rating. Zener Voltage: The zener voltage the device will exhibit at a specified current (I Z) in its breakdown region. Voltage Regulation: The change in zener voltage between two specified currents or percentage of I ZM. Dynamic Impedance: The small signal impedance of the diode when biased to operate in its breakdown region at a specified rms current modulation (typically 10% of I ZT or I ZK) and superimposed on I ZT or I ZK respectively. T4-LDS-0037, Rev 2 (111456) 11 Microsemi Corporation Page 2 of 6
3 ELECTRICAL CHARACTERISTICS (T A = 25 o C unless otherwise noted. Based on DC measurements at thermal equilibrium; V F = 1.1 IF = 0 ma for all types.) JEDEC TYPE NUMBER (Note 1) 1N5518BUR-1 1N5519BUR-1 1N55BUR-1 1N5521BUR-1 1N5522BUR-1 1N5523BUR-1 1N5524BUR-1 1N5525BUR-1 1N5526BUR-1 1N5527BUR-1 1N5528BUR-1 1N5529BUR-1 1N55BUR-1 1N5531BUR-1 1N5532BUR-1 1N5533BUR-1 1N5534BUR-1 1N5535BUR-1 1N5536BUR-1 1N5537BUR-1 1N5538BUR-1 1N5539BUR-1 1N5540BUR-1 1N5541BUR-1 1N5542BUR-1 1N5543BUR-1 1N5544BUR-1 1N5545BUR-1 1N5546BUR-1 NOMINAL ZENER VOLTAGE V I ZT (Note 2) Volts TEST CURRENT I ZT ma 10 MAX. ZENER IMPEDANCE B-C-D SUFFIX Z I ZT (Note 3) Ohms MAX. REVERSE CURRENT (Note 4) I R µa 0.1 V R VOLTS NON & A- SUFFIX B-C-D SUFFIX B-C-D SUFFIX MAXIMUM DC ZENER CURRENT I ZM (Note 5) ma B-C-D SUFFIX MAX. NOISE DENSITY AT I Z = 250 µa N D µv/ Hz REGULATION FACTOR V Z (Note 6) Volts LOW V Z CURRENT I ZL (Note 6) ma NOTES: 1. TOLERANCE AND VOLTAGE DESIGNATION The JEDEC type numbers without a letter prior to the UR-1 suffix are +/-% with guaranteed limits for only V Z, I R, and V F. Units with A prior to the UR-1 suffix are +/-10% with guaranteed limits for V Z, I R, and V F. Units with guaranteed limits for all six parameters are indicated by a B suffix for +/-% units, C suffix for +/-% and D suffix for +/-% prior to the UR-1 suffix. 2. ZENER VOLTAGE (V Z) MEASUREMENT Nominal zener voltage is measured with the device junction in thermal equilibrium with ambient temperature of 25 o C. 3. ZENER IMPEDANCE (Z Z) MEASUREMENT The zener impedance is derived from the 60 Hz ac voltage, which results when an ac current having an rms value equal to 10% of the dc zener current (I ZT) is superimposed on I ZT. 4. REVERSE CURRENT (I R) Reverse currents are guaranteed and are measured at V R as shown on the table. 5. MAXIMUM REGULATOR CURRENT (I ZM) The maximum current shown is as shown in MIL-PRF-19500/ MAXIMUM REGULATION FACTOR ( V Z) V Z is the maximum difference between V Z at I ZT and V Z at I ZL measured with the device junction in thermal equilibrium. T4-LDS-0037, Rev 2 (111456) 11 Microsemi Corporation Page 3 of 6
4 GRAPHS Noise density, (N D) is specified in microvolt-rms per square-root-hertz. Actual measurement is performed using a 1 khz to 3 khz frequency bandpass filter at a constant Zener test current (I ZT) at 25 o C ambient temperature. Pd, Rated Maximum dc Operation (mw) FIGURE 1 Noise Density Measurement Circuit T EC, End Cap Temperature ( o C) FIGURE 2 Power Derating Curve Typical Capacitance in Picofarads (pf) At 2 volts (V R) At zero volts Zener Voltage V Z FIGURE 3 Capacitance vs. Zener Voltage (Typical) FIGURE 4 Zener Diode Characteristics and Symbol Identification T4-LDS-0037, Rev 2 (111456) 11 Microsemi Corporation Page 4 of 6
5 GRAPHS (continued) ZENER IMPEDANCE ZZT (Ohms) 28 Volt 11 Volt 6.8 Volt OPERATING CURRENT I ZT (ma) FIGURE 5 ZENER IMPEDANCE vs. OPERATION CURRENT (typical) T4-LDS-0037, Rev 2 (111456) 11 Microsemi Corporation Page 5 of 6
6 PACKAGE DIMENSIONS Dimensions Ltr Inch Millimeter Min Max Min Max BD BL ECT S.001 min 0.03 min NOTES: 1. Dimensions are in inch. 2. Millimeters are given for general information only. 3. In accordance with ASME Y14.5M, diameters are equivalent to Φx symbology. PAD LAYOUT INCHES mm A.0 8 B C T4-LDS-0037, Rev 2 (111456) 11 Microsemi Corporation Page 6 of 6
HIGH VOLTAGE TEMPERATURE COMPENSATED ZENER REFERENCE DIODES
Available HIGH VOLTAGE TEMPERATURE COMPENSATED ZENER REFERENCE DIODES DESCRIPTION The 1N4057 through 1N4085A series of temperature compensated reference diodes provides a wide selection of nominal voltages
VOIDLESS HERMETICALLY SEALED STANDARD RECOVERY GLASS RECTIFIERS. Qualified to MIL-PRF-19500/420
Available on commercial versions VOIDLESS HERMETICALLY SEALED STANDARD RECOVERY GLASS RECTIFIERS Qualified to MIL-PRF-19500/420 DESCRIPTION This standard recovery rectifier diode series is military qualified
NPN Darlington Power Silicon Transistor Qualified per MIL-PRF-19500/472
and Available on commercial versions NPN Darlington Power Silicon Transistor Qualified per MIL-PRF-19500/472 DESCRIPTION Qualified Levels: JAN, JANTX, and JANTX This high speed NPN transistor is military
1SMB59xxBT3G Series, SZ1SMB59xxT3G Series. 3 Watt Plastic Surface Mount Zener Voltage Regulators
9xxBTG Series, SZ9xxTG Series Watt Plastic Surface Mount Zener Voltage Regulators This complete new line of W Zener diodes offers the following advantages. Features Zener Voltage Range. V to V ESD Rating
3EZ6.2D5 Series. 3 Watt DO-41 Surmetic 30 Zener Voltage Regulators
EZ6.D Series Watt DO- Surmetic Zener Voltage Regulators This is a complete series of Watt Zener diodes with limits and excellent operating characteristics that reflect the superior capabilities of silicon-oxide
MMSZxxxT1G Series, SZMMSZxxxT1G Series. Zener Voltage Regulators. 500 mw SOD 123 Surface Mount
MMSZxxxTG Series, SZMMSZxxxTG Series Zener Voltage Regulators 5 mw SOD 3 Surface Mount Three complete series of Zener diodes are offered in the convenient, surface mount plastic SOD 3 package. These devices
MMBZ52xxBLT1G Series, SZMMBZ52xxBLT3G. Zener Voltage Regulators. 225 mw SOT 23 Surface Mount
MMBZ5xxBLTG Series, SZMMBZ5xxBLTG Series Zener Voltage Regulators 5 mw SOT Surface Mount This series of Zener diodes is offered in the convenient, surface mount plastic SOT package. These devices are designed
1N59xxBRNG Series. 3 W DO-41 Surmetic 30 Zener Voltage Regulators
W DO-4 Surmetic 0 Zener Voltage Regulators This is a N9xxBRNG series with limits and excellent operating characteristics that reflect the superior capabilities of silicon oxide passivated junctions. All
MADP-000504-10720T. Non Magnetic MELF PIN Diode
MADP-54-172T Features High Power Handling Low Loss / Low Distortion Leadless Low Inductance MELF Package Non-Magnetic Surface Mountable RoHS Compliant MSL 1 Package Style 172 Dot Denotes Cathode Description
Characteristics Values Units. Rectangular waveform 0.5 A. range - 55 to 150 C
Bulletin I075 rev. C 05/06 IR0530CSPTRPbF 0.5 Amp 30 Volt Features Ultra Low V F To Footprint Area Very Low Profile (
PDS5100H. Product Summary. Features and Benefits. Mechanical Data. Description and Applications. Ordering Information (Note 5) Marking Information
Green 5A HIGH VOLTAGE SCHOTTKY BARRIER RECTIFIER POWERDI 5 Product Summary I F V R V F MAX (V) I R MAX (ma) (V) (A) @ +25 C @ +25 C 1 5..71.35 Description and Applications This Schottky Barrier Rectifier
MCC. www.mccsemi.com MMSZ4678 THRU MMSZ4716
omponents 2736 Marilla Street Chatsworth!"# $%!"# MMSZ4678 THRU MMSZ476 Features Zener Voltage.8V-39V Very Sharp Reverse Characteristic VZ tolerance ± 5% High Reliability Epoxy meets UL 94 V- flammability
STIEC45-xxAS, STIEC45-xxACS
Transil TVS for IEC 61000-4-5 compliance Datasheet - production data differential mode MIL STD 883G, method 3015-7 Class 3B 25 kv HBM (human body model) Resin meets UL 94, V0 MIL-STD-750, method 2026 solderability
High Performance Schottky Rectifier, 1 A
High Performance Schottky Rectifier, A VS-MQNPbF Cathode Anode DO-24AC (SMA) PRODUCT SUMMARY Package DO-24AC (SMA) I F(AV) A V R V V F at I F.78 V I RM ma at 25 C T J max. 5 C Diode variation Single die
Schottky Rectifier, 1.0 A
Schottky Rectifier, 1.0 A VS-BQ060PbF Vishay High Power Products FEATURES Small foot print, surface mountable Low forward voltage drop SMB Cathode Anode High frequency operation Guard ring for enhanced
10MQ100N SCHOTTKY RECTIFIER. I F(AV) = 2.1Amp V R = 100V. Bulletin PD-20520 rev. M 07/04. Major Ratings and Characteristics. Description/ Features
0MQ00N SCHOTTKY RECTIFIER 2. Amp I F(AV) = 2.Amp V R = 00V Major Ratings and Characteristics Characteristics 0MQ00N Units I F DC 2. A V RRM 00 V I FSM @ tp = 5 µs sine 20 A V F @.5Apk, T =25 C 0.68 V J
Surface Mount Schottky Barrier
FEATURES - Very low profile - typical height of 0.68mm - Low power loss, high efficiency - Ideal for automated placement - Moisture sensitivity level: level, per J-STD-020 - Compliant to RoHS Directive
Diode, Schottky SMB/DO-214AA. Page <1> 24/04/08 V1.1. Dimensions Inches (Millimeters)
Features: For surface mounted application. Metal to silicon rectifier, majority carrier conduction. Low forward voltage drop. Easy pick and place. High surge current capability. Plastic material. Epitaxial
NTMS4920NR2G. Power MOSFET 30 V, 17 A, N Channel, SO 8 Features
NTMS9N Power MOSFET 3 V, 7 A, N Channel, SO Features Low R DS(on) to Minimize Conduction Losses Low Capacitance to Minimize Driver Losses Optimized Gate Charge to Minimize Switching Losses These Devices
Features: High reliability. Very sharp reverse characteristic. Zener voltage 3.3V to 12V. V z -tolerance ±5%.
Features: High reliability. Very sharp reverse characteristic. Zener voltage 3.3V to 12V. V z -tolerance ±5%. Applications: Voltage stabilization. Absolute Maximum Ratings Parameter Test Conditions Symbol
SuperTan Extended (STE) Capacitors, Wet Tantalum Capacitors with Hermetic Seal
SuperTan Extended () Capacitors, Wet Tantalum Capacitors with Hermetic Seal FEATURES SuperTan Extended () represents a major breakthrough in wet tantalum capacitor Available technology. Its unique cathode
High Performance Schottky Rectifier, 1.0 A
High Performance Schottky Rectifier, 1. A VS-BQ3-M3 Cathode Anode SMB PRODUCT SUMMARY Package SMB I F(AV) 1. A V R 3 V V F at I F.42 V I RM max. 15 ma at 125 C T J max. 15 C Diode variation Single die
Schottky Rectifier, 1 A
Schottky Rectifier, 1 A BQPbF FEATURES SMB Cathode Anode Small foot print, surface mountable Low forward voltage drop High frequency operation Available RoHS* COMPLIANT Guard ring for enhanced ruggedness
High Performance Schottky Rectifier, 3.0 A
High Performance Schottky Rectifier, 3. A Cathode Anode SMC PRODUCT SUMMARY Package SMC I F(AV) 3. A V R 4 V V F at I F.46 V I RM 3 ma at 25 C T J max. 5 C Diode variation Single die E AS 6. mj FEATURES
Schottky Rectifier, 1.0 A
Schottky Rectifier, 1.0 A VS-BQ040-M3 Cathode Anode PRODUCT SUMMARY Package SMB I F(AV) 1.0 A V R 40 V V F at I F 0.38 V I RM 9 ma at 125 C T J max. 150 C Diode variation Single die E AS 3.0 mj FEATURES
30BQ100PbF SCHOTTKY RECTIFIER. 3 Amp. I F(AV) = 3.0Amp V R = 100V. Bulletin PD-20409 rev. C 01/07. Major Ratings and Characteristics
30BQ00PbF SCHOTTKY RECTIFIER 3 Amp I F(AV) = 3.0Amp V R = 00V Major Ratings and Characteristics Characteristics Values Units I F(AV) Rectangular 3.0 A waveform V RRM 00 V I FSM @ t p = 5 μs sine 800 A
1.5SMC6.8AT3G Series, SZ1.5SMC6.8AT3G Series. 1500 Watt Peak Power Zener Transient Voltage Suppressors. Unidirectional*
.6.8AT3G Series, SZ.6.8AT3G Series 00 Watt Peak Power Zener Transient Voltage Suppressors Unidirectional* The series is designed to protect voltage sensitive components from high voltage, high energy transients.
STPS20L15DPbF SCHOTTKY RECTIFIER. Case Styles. I F(AV) = 20Amp V R = 15V. Bulletin PD-20873 rev. A 02/07. Major Ratings and Characteristics
STPS20L5DPbF SCHOTTKY RECTIFIER 20 Amps I F(AV) = 20Amp V R = 5V Major Ratings and Characteristics Characteristics Values Units I F(AV) Rectangular 20 A waveform V RRM 5 V I FSM @ tp = 5 μs sine 700 A
Dual Common-Cathode Ultrafast Plastic Rectifier
(F,B)6AT thru (F,B)6JT Dual Common-Cathode Ultrafast Plastic Rectifier TO-0AB 6xT PIN PIN 3 PIN CASE 3 TO-63AB ITO-0AB F6xT PIN PIN 3 PIN 3 FEATURES Glass passivated chip junction Ultrafast recovery time
1SMA5.0AT3G Series, SZ1SMA5.0AT3G Series. 400 Watt Peak Power Zener Transient Voltage Suppressors. Unidirectional
.AT3G Series, SZ.AT3G Series 4 Watt Peak Power Zener Transient Voltage Suppressors Unidirectional The series is designed to protect voltage sensitive components from high voltage, high energy transients.
Metal-Oxide Varistors (MOVs) Surface Mount Multilayer Varistors (MLVs) > MLN Series. MLN SurgeArray TM Suppressor. Description
MLN SurgeArray TM Suppressor RoHS Description The MLN SurgeArray Suppressor is designed to help protect components from transient voltages that exist at the circuit board level. This device provides four
1N5820, 1N5821, 1N5822. Axial Lead Rectifiers SCHOTTKY BARRIER RECTIFIERS 3.0 AMPERES 20, 30, 40 VOLTS
1N58, 1N5821, 1N5822 1N58 and 1N5822 are Preferred Devices Rectifiers This series employs the Schottky Barrier principle in a large area metal-to-silicon power diode. State-of-the-art geometry features
STPS40L15CW. 2 x 20 Amps SCHOTTKY RECTIFIER. Case Styles. I F(AV) = 40Amp V R = 15V. Bulletin PD-20622 rev. B 10/06. Description/ Features
Bulletin PD-20622 rev. B 0/06 STPS40L5CW SCHOTTKY RECTIFIER 2 x 20 Amps I F(AV) = 40Amp V R = 5V Major Ratings and Characteristics Characteristics Values Units I F(AV) Rectangular 40 A waveform V RRM 5
ATC 600S Series Ultra-Low ESR, High Q, NPO RF & Microwave Capacitors
AC 600S Series Ultra-Low ESR, High Q, NPO RF & Microwave Capacitors Features: Lowest ESR in Class Highest Working Voltage in class 250V Standard EIA Size: 0603 Laser Marking (Optional) RoHS Compliant High
MCR08B, MCR08M. Sensitive Gate Silicon Controlled Rectifiers. Reverse Blocking Thyristors. SCRs 0.8 AMPERES RMS 200 thru 600 VOLTS
MCR8B, MCR8M Sensitive Gate Silicon Controlled Rectifiers Reverse Blocking Thyristors PNPN devices designed for line powered consumer applications such as relay and lamp drivers, small motor controls,
ICS650-44 SPREAD SPECTRUM CLOCK SYNTHESIZER. Description. Features. Block Diagram DATASHEET
DATASHEET ICS650-44 Description The ICS650-44 is a spread spectrum clock synthesizer intended for video projector and digital TV applications. It generates three copies of an EMI optimized 50 MHz clock
P6KE6.8A thru P6KE540A. TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor. www.vishay.com FEATURES PRIMARY CHARACTERISTICS
TRANSZORB Transient Voltage Suppressors DO-204AC (DO-15) PRIMARY CHARACTERISTICS V WM 5.8 V to 459 V V BR uni-directional 6.8 V to 540 V V BR bi-directional 6.8 V to 440 V P PPM 600 W P D 5.0 W I FSM (uni-directional
Schottky Rectifier, 100 A
Schottky Rectifier, A VS-BGQ Cathode Anode PowerTab PRODUCT SUMMARY Package PowerTab I F(AV) A V R V V F at I F 0.82 V I RM 180 ma at 125 C T J max. 175 C Diode variation Single die E AS 9 mj FEATURES
Small Signal Fast Switching Diode
Small Signal Fast Switching Diode MECHANICAL DATA Case: SOD- Weight: approx.. mg Packaging codes/options: 8/K per " reel (8 mm tape), K/box 08/K per 7" reel (8 mm tape), K/box FEATURES Silicon epitaxial
2N3903, 2N3904. General Purpose Transistors. NPN Silicon. Pb Free Packages are Available* Features. http://onsemi.com MAXIMUM RATINGS
N393, General Purpose Transistors NPN Silicon Features PbFree Packages are Available* MAXIMUM RATINGS Rating Symbol Value Unit CollectorEmitter Voltage V CEO 4 Vdc CollectorBase Voltage V CBO 6 Vdc EmitterBase
PNP SMALL SIGNAL SILICON TRANSISTOR Qualified per MIL-PRF-19500/291
DEVICES PNP SMALL SIGNAL SILICON TRANSISTOR Qualified per MIL-PRF-19500/291 LEVELS 2N2906A 2N2907A JAN 2N2906AL 2N2907AL JANTX 2N2906AUA 2N2907AUA JANTXV 2N2906AUB 2N2907AUB JANS 2N2906AUBC * 2N2907AUBC
NSI45060JDT4G. Adjustable Constant Current Regulator & LED Driver. 45 V, 60 100 ma 15%, 2.7 W Package
NSI5JDTG Adjustable Constant Current Regulator & Driver 5 V, ma 5%, 2.7 W Package The adjustable constant current regulator (CCR) is a simple, economical and robust device designed to provide a cost effective
STPS5L60. Power Schottky rectifier. Description. Features
Power Schottky rectifier Datasheet - production data Description Power Schottky rectifier suited for switch mode power supplies and high frequency inverters. This device is intended for use in low voltage
NE592 Video Amplifier
Video Amplifier The NE is a monolithic, two-stage, differential output, wideband video amplifier. It offers fixed gains of and without external components and adjustable gains from to with one external
IRLR8729PbF IRLU8729PbF
Applications l High Frequency Synchronous Buck Converters for Computer Processor Power l High Frequency Isolated DC-DC Converters with Synchronous Rectification for Telecom and Industrial Use Benefits
A I DM. W/ C V GS Gate-to-Source Voltage ± 20. Thermal Resistance Symbol Parameter Typ. Max. Units
V DS 2 V V GS Max ± 2 V R DSon) max @V GS = V) 24 m * PD - 9787A HEXFET Power MOSFET R DSon) max @V GS = 4.V) 4 m 6 Micro3 TM SOT-23) Applications) Load System Switch Features and Benefits Features Benefits
2N3906. General Purpose Transistors. PNP Silicon. Pb Free Packages are Available* http://onsemi.com. Features MAXIMUM RATINGS
2N396 General Purpose Transistors PNP Silicon Features PbFree Packages are Available* COLLECTOR 3 MAXIMUM RATINGS Rating Symbol Value Unit Collector Emitter Voltage V CEO 4 Vdc Collector Base Voltage V
Y.LIN ELECTRONICS CO.,LTD.
Features Current transfer ratio (CTR 50~600% at I F =5mA, V CE =5V) High isolation voltage between input and output (Viso=5000 V rms ) Creepage distance >7.62 mm Operating temperature up to +110 C Compact
1.5KE6.8A thru 1.5KE540A, 1N6267A thru 1N6303A. TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor. www.vishay.
TRANSZORB Transient Voltage Suppressors Case Style.5KE FEATURES Glass passivated chip junction Available in uni-directional and bi-directional 500 W peak pulse power capability with a /0 μs waveform, repetitive
A I DM. W/ C V GS Gate-to-Source Voltage ± 12. Thermal Resistance Symbol Parameter Typ. Max. Units
V DS 2 V V GS Max ±2 V * PD - 973A HEXFET Power MOSFET R DSon) max @V GS = 4.V) 2. m R DSon) max @V GS = 2.V) 27. m 6 Micro3 TM SOT-23) Applications) Load System Switch Features and Benefits Features Benefits
Surface Mount Multilayer Ceramic Chip Capacitor Solutions for High Voltage Applications
Surface Mount Multilayer Ceramic Chip Capacitor Solutions for High Voltage Applications ELECTRICAL SPECIFICATIONS X7R GENERAL SPECIFICATION Note Electrical characteristics at +25 C unless otherwise specified
How To Test A Sidactor Series For A Power Supply
SDP Series - SOT23-5 RoHS Pb e3 Description This new SIDACtor series is targeted for the tertiary or line driver side protection position for VDSL2+, ADSL2 applications and general I/O protection functions.
NOT RECOMMENDED FOR NEW DESIGNS
28 Volt NOT RECOMMENDED FOR NEW DESIGNS Features Attenuation 0 db from 110 khz to 0 MHz Operating temperature - to +8 C Nominal 28 V input, 0 V to 0 V operation 1.7 to A throughput current Transient suppression
2N3903, 2N3904. General Purpose Transistors. NPN Silicon. Features Pb Free Package May be Available. The G Suffix Denotes a Pb Free Lead Finish
N393, N393 is a Preferred Device General Purpose Transistors NPN Silicon Features PbFree Package May be Available. The GSuffix Denotes a PbFree Lead Finish MAXIMUM RATINGS Rating Symbol Value Unit CollectorEmitter
1 Form A Solid State Relay
Form A Solid State Relay VOAT, VOAABTR FEATURES 9 S S DC S' 3 S' High speed SSR - t on /t off < 8 μs Maximum R ON. Isolation test voltage 3 V RMS Load voltage V Load current A DC configuration DIP- package
Features Benefits Description TO-247AC (Modified) Absolute Maximum Ratings Parameter Max Units
Bulletin PD -.338 rev. B /4 HEXFRED TM HFA5PB6 Ultrafast, Soft Recovery Diode Features Ultrafast Recovery Ultrasoft Recovery Very Low I RRM Very Low Q rr Specified at Operating Conditions Benefits Reduced
VS-500 Voltage Controlled SAW Oscillator
VS-500 Voltage Controlled SAW Oscillator Features Improved High Performance ASIC Industry Standard Package, 9 x 14 x 4.5 mm Frequencies from 155 MHz to 850 MHz 3.3 V or 5.0 V Operation At 155.52 MHz, Jitter
Advanced Monolithic Systems
Advanced Monolithic Systems FEATURES Three Terminal Adjustable or Fixed oltages* 1.5, 1.8, 2.5, 2.85, 3.3 and 5. Output Current of 1A Operates Down to 1 Dropout Line Regulation:.2% Max. Load Regulation:.4%
Features. Applications. Truth Table. Close
ASSR-8, ASSR-9 and ASSR-8 Form A, Solid State Relay (Photo MOSFET) (0V/0.A/0Ω) Data Sheet Description The ASSR-XX Series consists of an AlGaAs infrared light-emitting diode (LED) input stage optically
NUD4011. Low Current LED Driver
NUD0 Low LED Driver This device is designed to replace discrete solutions for driving LEDs in AC/DC high voltage applications (up to 00 V). An external resistor allows the circuit designer to set the drive
TRIPLE PLL FIELD PROG. SPREAD SPECTRUM CLOCK SYNTHESIZER. Features
DATASHEET ICS280 Description The ICS280 field programmable spread spectrum clock synthesizer generates up to four high-quality, high-frequency clock outputs including multiple reference clocks from a low-frequency
HFA15TB60 HFA15TB60-1
HEXFRED TM Features Ultrafast Recovery Ultrasoft Recovery Very Low I RRM Very Low Q rr Specified at Operating Conditions Benefits Reduced RFI and EMI Reduced Power Loss in Diode and Switching Transistor
Features. Modulation Frequency (khz) VDD. PLL Clock Synthesizer with Spread Spectrum Circuitry GND
DATASHEET IDT5P50901/2/3/4 Description The IDT5P50901/2/3/4 is a family of 1.8V low power, spread spectrum clock generators capable of reducing EMI radiation from an input clock. Spread spectrum technique
SDC15. TVS Diode Array for ESD Protection of 12V Data and Power Lines. PROTECTION PRODUCTS Description. Features. Mechanical Characteristics
Description The SDC15 transient voltage suppressor (TVS) is designed to protect components which are connected to data and transmission lines from voltage surges caused by electrostatic discharge (ESD),
MUR1520 MURB1520 MURB1520-1
MUR520 MURB520 MURB520- Ultrafast Rectifier Features Ultrafast Recovery Time Low Forward Voltage Drop Low Leakage Current 75 C Operating Junction Temperature t rr = 35ns I F(AV) = 5Amp V R = 200V Description/
SPREAD SPECTRUM CLOCK GENERATOR. Features
DATASHEET ICS7152 Description The ICS7152-01, -02, -11, and -12 are clock generators for EMI (Electro Magnetic Interference) reduction (see below for frequency ranges and multiplier ratios). Spectral peaks
2N4921G, 2N4922G, 2N4923G. Medium-Power Plastic NPN Silicon Transistors 1.0 AMPERE GENERAL PURPOSE POWER TRANSISTORS 40 80 VOLTS, 30 WATTS
,, Medium-Power Plastic NPN Silicon Transistors These highperformance plastic devices are designed for driver circuits, switching, and amplifier applications. Features Low Saturation Voltage Excellent
Small Signal Fast Switching Diode FEATURES PART ORDERING CODE INTERNAL CONSTRUCTION TYPE MARKING REMARKS
Small Signal Fast Switching Diode MARKING (example only) Bar = cathode marking XY = type code X Y 6 MECHANICAL DATA Case: SOD- Weight: approx.. mg Packaging codes/options: 8/K per " reel (8 mm tape), K/box
W- Series. Features: WOB. Mechanical Data Case : Moulded plastic. Lead : Solder plated. Weight : 1.10 grams. Page <1> 15/07/08 V1.
Features: Surge overload ratings to 40 amperes peak. Ideal for printed circuit board. Reliable low cost construction. High temperature soldering guaranteed: 260 C/10 seconds/0.375inch (9.5mm) lead lengths
High flux for outdoor applications
General Illumination LUXEON R High flux for outdoor applications LUXEON R brings illumination grade LED light sources to outdoor and industrial lighting applications and makes it easier than ever to design
PHOTOTRANSISTOR OPTOCOUPLERS
MCT2 MCT2E MCT20 MCT27 WHITE PACKAGE (-M SUFFIX) BLACK PACKAGE (NO -M SUFFIX) DESCRIPTION The MCT2XXX series optoisolators consist of a gallium arsenide infrared emitting diode driving a silicon phototransistor
2N4401. General Purpose Transistors. NPN Silicon. Pb Free Packages are Available* http://onsemi.com. Features MAXIMUM RATINGS THERMAL CHARACTERISTICS
General Purpose Transistors NPN Silicon Features PbFree Packages are Available* MAXIMUM RATINGS Rating Symbol Value Unit Collector Emitter Voltage V CEO 4 Vdc Collector Base Voltage V CBO 6 Vdc Emitter
Lower Conduction Losses Low Thermal Resistance to PCB ( 0.5 C/W)
PD -97428 IRFH5020PbF HEXFET Power MOSFET V DS 200 V 55 m: R DS(on) max (@V GS = V) Q g (typical) 36 nc R G (typical).9 : I D (@T c(bottom) = 25 C) 43 A PQFN 5X6 mm Applications Secondary Side Synchronous
NUD4001, NSVD4001. High Current LED Driver
NUD, NSVD High Current LED Driver This device is designed to replace discrete solutions for driving LEDs in low voltage AC DC applications. V, V or V. An external resistor allows the circuit designer to
19TQ015PbF. 19 Amp SCHOTTKY RECTIFIER. Case Styles. I F(AV) = 19Amp V R = 15V. Bulletin PD-20840 rev. B 04/06. Major Ratings and Characteristics
Bulletin PD-0840 rev. B 04/06 9TQ05PbF SCHOTTKY ECTIFIE 9 Amp I F(A) = 9Amp = 5 Major atings and Characteristics Characteristics alues Units I F(A) ectangular 9 A waveform M 5 I FSM @ tp = 5 μs sine 700
Surface Mount Multilayer Ceramic Chip Capacitors for Automotive Applications
Surface Mount Multilayer Ceramic Chip Capacitors for Automotive Applications FEATURES AEC-Q200 qualified with PPAP available Available in 0402 to 1812 body size Three dielectric materials AgPd termination
0.45mm Height 0402 Package Pure Green Chip LED Technical Data Sheet. Part No.: LL-S160PGC-G5-1B
.45mm Height 42 Package Pure Green Chip LED Technical Data Sheet Part No.: LL-S16PGC-G5-1B Spec No.: S16 Rev No.: V.2 Date: Dec./6/25 Page: 1 OF 9 Features: Package in 8mm tape on 7" diameter reel. Compatible
PERFORMANCE SPECIFICATION SHEET
The documentation and process conversion measures necessary to comply with this document shall be completed by 13 February 2014. INCH-POUND MIL-PRF-19500/538G 13 December 2013 SUPERSEDING MIL-PRF-19500/538F
LM134-LM234-LM334. Three terminal adjustable current sources. Features. Description
Three terminal adjustable current sources Features Operates from 1V to 40V 0.02%/V current regulation Programmable from 1µA to 10mA ±3% initial accuracy Description The LM134/LM234/LM334 are 3-terminal
CLA4607-085LF: Surface Mount Limiter Diode
DATA SHEET CLA4607-085LF: Surface Mount Limiter Diode Applications Low-loss, high-power limiters Receiver protectors Anode (Pin 1) Anode (Pin 3) Features Low thermal resistance: 55 C/W Typical threshold
www.jameco.com 1-800-831-4242
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. LF411 Low Offset, Low Drift JFET Input Operational Amplifier General Description
Metal Film Resistors, Industrial, Precision
CMF Industrial Metal Film Resistors, Industrial, Precision FEATURES Small size - conformal coated Flame retardant epoxy coating Controlled temperature coefficient Excellent high frequency characteristics
MP-1919 XNOVA Cube TM SMD LED
MP-1919 XNOVA Cube TM SMD LED Features: Table of Contents Technology Overview.... 2 Product Selection Table... 3 Operating Characteristics.. 4 Chromaticity Binning.... 5 Chromaticity Diagram.... 6 Characteristic
Metal Film Resistors, Military, MIL-R-10509 Qualified, Precision, Type RN and MIL-PRF-22684 Qualified, Type RL
Metal Film Resistors, Military, Qualified, Precision, Type RN and Qualified, Type RL FEATURES Very low noise (- 40 db) Very low voltage coefficient (5 ppm/v) Controlled temperature coefficient Flame retardant
MHL8701 MHL8705. MHL8701 / MHL8705 SET Free 3 Amp & 5 Amp ULDO Regulators. Levels Available COTS MILITARY SPACE
MHL8701 / SET Free 3 Amp & 5 Amp ULDO Regulators DESCRIPTION The MHL8701 & are space qualified, very low dropout linear regulators designed for military and space flight applications. The MHL8701 is designed
handbook, 2 columns handbook, halfpage 085 CS
FEATURES Polarized aluminium electrolytic capacitors, non-solid, self healing Extended voltage and capacitance range SMD-version, fully moulded, insulated Flexible terminals, reflow and wave solderable
4N25 Phototransistor Optocoupler General Purpose Type
4N Phototransistor Optocoupler General Purpose Type Data Sheet Lead (Pb) Free RoHS 6 fully compliant RoHS 6 fully compliant options available; -xxxe denotes a lead-free product Description The 4N is an
Medium power Schottky barrier single diode
Rev. 03 17 October 2008 Product data sheet 1. Product profile 1.1 General description Planar medium power Schottky barrier single diode with an integrated guard ring for stress protection, encapsulated
28 Volt Input - 40 Watt
Features Powers 28 volt dc-dc converters during power dropout Input voltage 12 to 40 volts Operating temperature -55 to +125 C Reduces hold-up capacitance by 80% Inhibit function Synchronization function
NTE923 & NTE923D Integrated Circuit Precision Voltage Regulator
NTE923 & NTE923D Integrated Circuit Precision Voltage Regulator Description: The NTE923 and NTE923D are voltage regulators designed primarily for series regulator applications. By themselves, these devices
8ETH06 8ETH06S 8ETH06-1 8ETH06FP
Bulletin PD-0746 rev. D 03/03 8ETH06 8ETH06S 8ETH06-8ETH06FP Hyperfast Rectifier Features Hyperfast Recovery Time Low Forward Voltage Drop Low Leakage Current 75 C Operating unction Temperature UL E78996
1N4001, 1N4002, 1N4003, 1N4004, 1N4005, 1N4006, 1N4007. Axial Lead Standard Recovery Rectifiers
1N4001, 1N4002, 1N4003, 1N4004, 1N4005, 1N4006, 1N4007 Axial ead Standard Recovery Rectifiers This data sheet provides information on subminiature size, axial lead mounted rectifiers for general purpose
Symbol Parameters Units Frequency Min. Typ. Max. 850 MHz 14.8 16.3 17.8
Product Description Sirenza Microdevices SGC-689Z is a high performance SiGe HBT MMIC amplifier utilizing a Darlington configuration with a patented active-bias network. The active bias network provides
RoHS Compliant Containing no Lead, no Bromide and no Halogen. IRF9310PbF SO8 Tube/Bulk 95 IRF9310TRPbF SO8 Tape and Reel 4000
PD 97437A IRF93PbF HEXFET Power MOSFET V DS 30 V R DS(on) max (@V GS = V) I D (@T A = 25 C) 4. mω 20 A * SO8 Applications Charge and Discharge Switch for Notebook PC Battery Application Features and Benefits
2N2222A. Small Signal Switching Transistor. NPN Silicon. MIL PRF 19500/255 Qualified Available as JAN, JANTX, and JANTXV. http://onsemi.com.
Small Signal Switching Transistor NPN Silicon Features MILPRF19/ Qualified Available as JAN, JANTX, and JANTXV COLLECTOR MAXIMUM RATINGS (T A = unless otherwise noted) Characteristic Symbol Value Unit
TSM2N7002K 60V N-Channel MOSFET
SOT-23 SOT-323 Pin Definition: 1. Gate 2. Source 3. Drain PRODUCT SUMMARY V DS (V) R DS(on) (Ω) I D (ma) 5 @ V GS = 10V 100 60 5.5 @ V GS = 5V 100 Features Low On-Resistance ESD Protection High Speed Switching
Parameter Test Conditions Symbol Value Unit Junction ambient l=4mm, T L =constant R thja 110 K/W
Silicon Epitaxial Planar Z Diodes Features Sharp edge in reverse characteristics Low reverse current Low noise Very high stability Available with tighter tolerances Applications Voltage stabilization 94
P-Channel 20 V (D-S) MOSFET
Si30CDS P-Channel 0 V (D-S) MOSFET MOSFET PRODUCT SUMMARY V DS (V) R DS(on) ( ) I D (A) a Q g (Typ.) - 0 0. at V GS = - 4.5 V - 3. 0.4 at V GS = -.5 V -.7 3.3 nc TO-36 (SOT-3) FEATURES Halogen-free According
Contents. 12. Lot Number 10. 13. Reel Packing Structure 11. 14. Precaution for Use 13. 15. Hazard Substance Analysis 14. 16. Revision History 18
Rev : 00 ISSUE NO : DATE OF ISSUE : 2009. 04. 10 S P E C I F I CATION MODEL : SLHNNWW629T1S0U0S0 [Rank : (S0), (U0), (S0)] HIGH POWER LED - SUNNIX6 CUSTOMER : CUSTOMER CHECKED CHECKED APPROVED SAMSUNG
VS-702 Voltage Controlled SAW Oscillator Previous Vectron Model VS-720
VS-702 Voltage Controlled SAW Oscillator Previous Vectron Model VS-720 VS-702 Description The VS-702 is a SAW Based Voltage Controlled Oscillator that achieves low phase noise and very low jitter performance.